ChartHawk - Key Levels + 8EMA Bias [Free]Premarket and prior-day levels, drawn clean, with a daily 8EMA bias tag.
Every session opens with the same four lines that matter: the premarket high and low, and yesterday's high and low. This plots all four automatically and keeps them on your chart, so you are not redrawing levels every morning.
How to read it:
- Green marks a high (PMH / PDH). Red marks a low (PML / PDL).
- Dotted lines are premarket. Solid lines are prior day.
Colour tells you which side of the range you are looking at; line style tells you which session it came from.
The tag in the corner reads LONG or SHORT off the daily 8EMA - a quick top-down read on whether the name is trending with you or against you before you take an intraday setup.
Premarket levels are pulled from the extended session, so they populate whether or not you have extended hours turned on for your chart. Prior-day levels use confirmed daily data and do not repaint.
Alerts - five built in, all confirmed-close only, so a wick through a level cannot trigger them:
- Closed above premarket high
- Closed below premarket low
- Closed above prior-day high
- Closed below prior-day low
- Daily 8EMA bias flipped
Settings: session window, timezone, EMA length, tag size, colours, and price labels are all editable.
Educational tool only. Not financial advice, no signals, no trade recommendations.
Built by a trader who runs these live. Full multi-ticker screener and entry taggers at charthawkhq.com مؤشر
مؤشر
مؤشر
مؤشر
NOVA EMA/MACD V2## NOVA EMA/MACD V2
NOVA EMA/MACD V2 is a multi-timeframe retracement strategy designed to identify structured continuation opportunities using EMA touches, MACD confirmation, and higher-timeframe momentum filtering.
The strategy first waits for price to retrace to the selected EMA after a defined number of candles have remained clear of it. Once a valid touch is detected, the setup becomes armed and waits for confirmation from the entry-timeframe MACD.
A trade can be triggered in two ways:
* The entry-timeframe MACD crosses in the direction of the setup while the higher-timeframe MACD agrees.
* The higher-timeframe MACD flips into the setup direction while the entry MACD is already aligned.
An optional EMA-side filter requires buy entries to close above the EMA and sell entries to close below it.
### Trade management
The strategy opens three separate positions using risk-based position sizing.
Default targets:
* Position 1: **1.5R**
* Position 2: **2R**
* Position 3: **2.5R**
Stop-loss distance is calculated using the width of a configurable Keltner Channel. Break-even activates at **0.9R** by default.
An additional EMA early-exit system activates after price reaches 1R. The remaining position can then be closed after four consecutive candles close on the wrong side of the EMA.
### Main features
* Multi-timeframe EMA and MACD analysis
* Higher-timeframe MACD direction filter
* Immediate entry when HTF MACD flips and entry MACD is already aligned
* Keltner Channel-based stop loss
* USD risk-based position sizing
* Three configurable profit targets
* Automatic break-even management
* EMA-based early exit
* Setup, entry, exit, and management alerts
* Clean status dashboard displaying trend, risk, quantity, stop distance, break-even, and early-exit status
### Recommended use
The default configuration is optimized for lower-timeframe chart analysis, particularly the 1-minute timeframe. Users should test the strategy on their chosen symbol, broker feed, session, spread, commission, and execution conditions before using it for live trading.
**Disclaimer:** This strategy is provided for educational and analytical purposes only. Historical performance does not guarantee future results. Trading involves substantial risk, and users are responsible for their own trading decisions.
استراتيجية
استراتيجية
مؤشر
استراتيجية
SyncroFlow RSI [Trend & Momentum]Title: SyncroFlow RSI
Description:
SyncroFlow RSI is a modern, visually clean indicator designed to help traders objectively identify points of confluence between macro trend direction and short-term momentum.
By combining the structural trend analysis of the SuperTrend with the momentum dynamics of the RSI and its EMA, this tool provides a clear, noise-free visualization of market flow. It is built with a calming, pastel-based color palette to reduce eye strain during long charting sessions, allowing for calm and rational market analysis.
🌟 Core Concepts
Macro Trend (Background Color):
The indicator calculates a short-term SuperTrend (default 10, 1.0) and projects its direction as a subtle background color. A Teal background indicates a bullish overarching trend, while a Rose Red background indicates a bearish trend.
Momentum Flow (RSI & EMA):
Instead of just looking at overbought/oversold levels, this script focuses on the trajectory of the RSI. It plots the RSI alongside a smoothing EMA. The EMA changes color (Teal/Red) based on its slope, giving you an immediate read on whether short-term momentum is accelerating or decelerating.
SyncroFlow Signals (Triangles):
The true edge of this indicator lies in its "Sync" logic. When the overarching trend (SuperTrend Background) and the short-term momentum (RSI's EMA slope) align in the same direction, the indicator plots a triangle signal. This highlights the exact moment the market regains its directional harmony.
⚙️ Key Features
Alternating Signal Filter: To prevent signal spam during choppy consolidations or complex pullbacks, the script includes a strict alternating filter. It will only print a bullish signal if the previous signal was bearish (and vice versa), ensuring you only see the most significant structural shifts.
Calm & Minimalist Aesthetics: Designed with custom Earth and Pastel tones to keep your charts looking professional and easy on the eyes.
Highly Customizable: Everything is neatly grouped in the settings panel. You can easily adjust the RSI length, SuperTrend sensitivity, toggle visuals (hide background or signals), and fully customize the colors/transparency to match your dark or light chart theme.
💡 How to Interpret the Data
Trend Continuation (Pullbacks): During a strong Teal background (Bullish SuperTrend), wait for the RSI's EMA to briefly turn red (pullback), and then look for the Bullish Sync Triangle (alignment) as a potential objective area to rejoin the trend.
Objective Environment Assessment: If the background is Teal but the EMA line is consistently Red, it visually warns you that the macro trend and micro momentum are fighting each other (consolidation/chop).
Disclaimer: This script is designed for educational and objective environmental analysis purposes only. It is not a standalone mechanical trading system. Always use it in conjunction with your own price action analysis and risk management rules. مؤشر
مؤشر
Custom RSI Indicator Custom RSI Indicator
Overview
The Custom RSI Indicator v6 is a clean and easy-to-use momentum indicator built on the Relative Strength Index (RSI). It helps traders identify potential overbought and oversold market conditions while providing visual buy and sell signals based on RSI crossovers.
This indicator is designed for traders who want a simple, non-repainting RSI tool that can be used across multiple markets and timeframes.
Features
- Adjustable RSI length.
- Custom price source selection.
- Clearly marked Overbought (70), Oversold (30), and Midline (50) levels.
- Visual BUY and SELL signal markers.
- Background highlighting during overbought and oversold conditions.
- Alert conditions for TradingView notifications.
How the Indicator Works
The indicator calculates the Relative Strength Index (RSI), which measures the speed and strength of recent price movements.
- RSI above 70 indicates that price has entered an overbought zone, where bullish momentum may be becoming extended.
- RSI below 30 indicates that price has entered an oversold zone, where bearish momentum may be weakening.
- RSI around 50 represents a neutral momentum area.
The indicator also generates:
- BUY Signal: When RSI crosses above the 30 level, suggesting momentum is strengthening after an oversold condition.
- SELL Signal: When RSI crosses below the 70 level, suggesting momentum is weakening after an overbought condition.
These signals are momentum-based and should always be interpreted within the context of the overall market trend.
How to Use
1. Add the indicator to your TradingView chart.
2. Choose your preferred RSI length (14 is the default and widely used).
3. Watch the RSI movement relative to the key levels:
- Above 70
- Below 30
- Around 50
4. Use the generated BUY and SELL markers as potential trade opportunities.
5. Enable TradingView alerts if you want to receive notifications when new signals appear.
Trading Ideas
This indicator can be used in several ways:
Trend Trading
- Look for BUY signals when the overall market trend is bullish.
- Look for SELL signals when the overall market trend is bearish.
Momentum Reversals
When RSI moves into an extreme zone and then exits it, momentum may be shifting. Waiting for confirmation from price action can help filter weaker setups.
Range Markets
During sideways markets, RSI often reacts well between the overbought and oversold levels, making it useful for identifying potential swing opportunities.
Best Practices
- Combine RSI with market structure, support and resistance, or trend analysis.
- Avoid relying on RSI signals alone during highly volatile conditions.
- Consider waiting for candle confirmation before entering a trade.
- Always apply proper risk management and position sizing.
Timeframes
This indicator can be used on any timeframe, including:
- 1 Minute
- 5 Minutes
- 15 Minutes
- 1 Hour
- 4 Hours
- Daily
- Weekly
Different timeframes may produce different signal frequencies and should be selected according to your trading style. مؤشر
Labeled EMA Ribbon + VWAP#Labeled EMA Ribbon + VWAP
## Overview
Custom Labeled EMA Ribbon + VWAP is a Pine Script v6 overlay indicator that combines five customizable exponential moving averages with a session VWAP and places clearly identified labels beside each line.
The indicator was created to solve a simple but persistent charting problem: when several moving averages are displayed at the same time, it can be difficult to remember which colored line represents which EMA.
This becomes especially challenging when traders use several averages with similar values, frequently change their EMA settings, or view charts where the lines are compressed closely together.
Rather than forcing the user to memorize a color scheme, open the indicator settings, or move the cursor over each line, this script places the name of each EMA directly beside its current value on the right side of the chart.
For example, when an EMA slot is set to a length of 21, its label displays “EMA 21.” If that same slot is changed to a length of 20, the label automatically updates to “EMA 20.”
The primary purpose of the indicator is to make a multi-EMA chart easier to read, customize, and interpret without changing the underlying meaning of the moving averages or VWAP.
## What the Indicator Displays
The default configuration includes:
* 8 EMA
* 21 EMA
* 34 EMA
* 50 EMA
* 200 EMA
* Daily VWAP
All five EMA lengths can be changed by the user.
Each line includes independent controls for:
* Visibility
* Length
* Color
* Line width
* Label visibility
* Label size
VWAP also has separate visibility, color, line-width, source, and label controls.
The indicator therefore functions as a customizable charting framework rather than a fixed moving-average template.
## Why the Labels Are Important
Most moving-average indicators identify their lines through color alone.
That approach can work when only one or two averages are displayed, but it becomes less practical when several EMAs are grouped together. During consolidation or strong directional movement, multiple averages may overlap or remain only a few ticks apart.
The right-side labels allow the user to immediately identify each line without relying exclusively on color.
This can be especially useful for traders who:
* Use several moving averages on one chart
* Frequently switch between different EMA combinations
* Analyze charts on different screens or devices
* Have difficulty remembering which color belongs to each average
* Share charts with traders who do not know their personal color system
* Want the chart itself to explain what each line represents
The labels are attached to the current EMA or VWAP value and update as the chart changes.
Users may also display the current numerical price beside each label. When this option is enabled, a label can show both the moving-average name and its present value.
## Custom EMA Slots
The indicator contains five EMA slots instead of permanently locking the user into one specific combination.
The default lengths are 8, 21, 34, 50, and 200, but each slot can be changed independently.
For example, a trader could change the default configuration to:
* 5 EMA
* 10 EMA
* 20 EMA
* 50 EMA
* 200 EMA
The labels automatically use the selected length. The user does not need to modify the script or manually rename anything after changing an input.
This dynamic labeling is one of the indicator’s main practical features. It allows the chart to remain accurate even when the user experiments with different moving-average combinations.
## Moving-Average Source
The EMA source is customizable.
The default source is the closing price, but users may select another available price source from the indicator settings.
All five EMA calculations use the selected source while retaining their individually selected lengths.
## VWAP
The script includes a daily anchored Volume Weighted Average Price calculation.
By default, VWAP resets at the beginning of each new trading day and uses HLC3 as its source.
The VWAP source can be changed by the user.
There is also an option to display VWAP only on intraday charts. This helps prevent a daily session VWAP from appearing on timeframes where the user may not find it relevant.
VWAP includes its own:
* Visibility control
* Source setting
* Color
* Line width
* Right-side label
* Label size
When current values are enabled, the VWAP label can also display its current price.
## Right-Side Labels
The indicator creates persistent labels for all five EMAs and VWAP.
The labels are positioned beyond the most recent candle so they do not cover the active price bar.
Users can control:
* Whether all labels are shown
* Which individual labels are visible
* How far labels appear from the current candle
* Whether labels are horizontally staggered
* The amount of spacing between staggered labels
* Label text color
* The size of each individual label
* Whether current price values appear inside the labels
The master label control allows all labels to be hidden without turning off the underlying EMA and VWAP lines.
Individual label controls allow a line to remain visible while its label is hidden.
## Staggered Label Placement
When multiple moving averages are close together, their labels may overlap.
The optional stagger feature moves each label progressively farther to the right. This creates horizontal separation between labels even when their underlying EMA values are nearly identical.
The stagger distance is adjustable.
This feature is especially useful during:
* Consolidation
* Moving-average compression
* Low-volatility periods
* EMA crossovers
* Strong trends where several averages remain tightly grouped
Staggering changes only the horizontal position of the labels. It does not alter the moving-average calculations or their actual price levels.
## Individual Label Sizes
Each EMA and the VWAP has its own label-size setting.
Available sizes include:
* Tiny
* Small
* Normal
* Large
* Huge
This allows the user to emphasize certain reference lines.
For example, a trader may use larger labels for the 200 EMA and VWAP while keeping faster moving-average labels smaller.
The sizing controls can also improve readability across different chart layouts and screen sizes.
## Optional EMA Ribbon
The indicator includes optional shading between the first four EMA slots.
The ribbon fills the areas between:
* EMA Slot 1 and EMA Slot 2
* EMA Slot 2 and EMA Slot 3
* EMA Slot 3 and EMA Slot 4
The shading changes according to the relative position of the two averages.
When the faster EMA is above the slower EMA, the selected bullish ribbon color is used.
When the faster EMA is below the slower EMA, the selected bearish ribbon color is used.
The bullish and bearish ribbon colors are customizable, and the user can adjust the ribbon transparency.
For the most intuitive ribbon display, faster EMA lengths should generally be placed in the lower-numbered slots and slower EMA lengths in the higher-numbered slots.
For example:
* Slot 1: 8 EMA
* Slot 2: 21 EMA
* Slot 3: 34 EMA
* Slot 4: 50 EMA
The ribbon is optional and is turned off by default so users can choose between a clean line-based chart and a shaded moving-average structure.
## Practical Uses
The indicator can support several types of chart analysis.
### Trend Context
Traders may use the position and slope of the EMAs to observe whether price is trading above, below, or between important moving averages.
A faster EMA remaining above a slower EMA may support a bullish trend interpretation, while the opposite arrangement may support a bearish interpretation.
### Dynamic Support and Resistance
Some traders use moving averages as areas where price may pause, react, reject, or continue.
The labels make it easier to identify which moving average price is approaching without having to remember its color.
### Pullback Analysis
A trader may observe whether price pulls back toward a faster EMA, a middle EMA, or a slower trend average.
For example, a shallow pullback may react near the 8 or 21 EMA, while a deeper pullback may reach the 34 or 50 EMA.
The script does not determine whether those reactions will succeed. It makes the relevant averages easier to identify.
### Long-Term Trend Reference
The 200 EMA is commonly used as a broader trend reference.
The default larger label and thicker line make it easier to distinguish the 200 EMA from the shorter averages, although both settings remain customizable.
### VWAP Context
Intraday traders may compare price with VWAP to evaluate whether price is trading above or below the session’s volume-weighted average.
VWAP can also be compared with the EMA structure.
For example, a trader may observe whether:
* Price is above both VWAP and the EMA group
* Price is below both VWAP and the EMA group
* VWAP is positioned inside the EMA ribbon
* Price is repeatedly crossing VWAP and the EMAs during consolidation
These observations provide context but are not automatic trade signals.
## Original Contribution
The formulas used for exponential moving averages and VWAP are standard technical-analysis calculations.
This script does not claim to create a new type of moving average or a new VWAP formula.
Its contribution is the combination of these familiar tools into a customizable chart-reading system that includes:
* Five independently adjustable EMA slots
* Labels that automatically display the selected EMA lengths
* Optional current-value labels
* Individually controlled line and label visibility
* Individual label sizes
* Adjustable right-side label placement
* Horizontal label staggering
* An optional multi-layer EMA ribbon
* A daily VWAP with its own label and settings
* A structured settings menu designed for easy customization
The main objective is usability and chart clarity.
## What the Indicator Does Not Do
This indicator is not a trading strategy.
It does not automatically determine:
* Trade entries
* Trade exits
* Stop-loss placement
* Profit targets
* Trend reversals
* Breakout validity
* Support or resistance strength
* Position size
* Risk-to-reward
* Market volatility
* Volume confirmation
* Whether price is overextended
An EMA or VWAP touch does not guarantee that price will reverse or continue.
Moving averages are calculated from historical price information and will react after price changes. Faster EMAs generally respond more quickly, while slower EMAs generally respond more gradually.
VWAP reflects the session’s volume-weighted average price, but trading above or below VWAP does not guarantee future direction.
## Recommended Use
The indicator is best used as a chart-organization and market-context tool.
Traders should combine it with their own methods for:
* Market structure
* Price action
* Support and resistance
* Volume
* Liquidity
* Entry confirmation
* Stop placement
* Position sizing
* Risk management
Its purpose is to help the trader clearly identify the moving averages and VWAP already being used in that analysis.
## Summary
Custom Labeled EMA Ribbon + VWAP was designed for traders who want the benefits of several moving averages without the confusion of trying to remember which line is which.
The indicator places dynamically updated labels beside five customizable EMAs and a daily VWAP. It also provides independent line controls, individual label sizes, optional price values, adjustable label spacing, horizontal staggering, and optional ribbon shading.
Its primary value is not generating signals. Its value is making a multi-average chart easier to read, modify, and use consistently.
مؤشر
Moneyball MTF Trend Databox [VinnieTheFish]📊 Moneyball MTF Trend Databox
The Moneyball MTF Trend Databox is a powerful, lightweight companion dashboard designed specifically to complement the core Moneyball EMA-MACD indicator ecosystem.
When trading with the Moneyball strategy, keeping track of higher and lower timeframe market structures is vital. Instead of manually flipping through charts, this utility aggregates a comprehensive multi-timeframe (MTF) trend analysis across 8 critical timeframes simultaneously and packs them into a clean, customizable HUD directly on your current chart.
🔍 How It Works
The engine dynamically evaluates the current asset’s trend alignment using a single master trend filter of your choice. A timeframe is marked as BULLISH if the price is trading above your selected Moving Average, and BEARISH if it falls below.
By looking at the dashboard, you can instantly see if your lower-timeframe execution aligns with the higher-timeframe "macro" trend.
⚙️ Key Features:
8 Timeframe Coverage: Scans the 2m, 5m, 15m, 30m, 1h, 4h, Daily, and Weekly intervals concurrently.
4-in-1 Trend Filters: Choose your preferred trend line directly from the settings:
SMA (Simple Moving Average)
EMA (Exponential Moving Average)
DEMA (Double EMA - for faster response time)
TEMA (Triple EMA - ultra-low lag trend tracking)
Fully Customizable Display: Position the dashboard anywhere on your chart (Top Right, Bottom Left, etc.) and fine-tune the background opacity so it never obstructs your price action or candlesticks.
Optimized Execution (Pine Script v6): Built natively on TradingView's newest engine version. The table updates strictly on the live bar (barstate.islast), completely protecting your charts from browser lag or slow calculation times.
📈 How to Use This in Your Trading
Macro-Trend Alignment: Before taking a Moneyball buy or sell signal on your execution chart (e.g., the 5-minute), check the Databox. If the 1H, 4H, and Daily rows are screaming BULLISH, you have massive high-probability wind at your back for long positions.
Confluence Clustering: Look for moments when all (or most) timeframes switch to a single color. A full grid alignment often signals a massive breakout or a strong continuation wave.
Counter-Trend Warning: If you see a buy signal on your lower timeframe but the higher timeframes are strictly BEARISH, the dashboard acts as an early warning system to either pass on the trade or take quick, conservative profits.
🛠️ Recommended Setup
For the truest "Moneyball" alignment, set your configuration input to:
MA Length: 200
MA Type: EMA or DEMA
Pair this dashboard on your layout with the primary Moneyball EMA-MACD indicator oscillator to experience the full synergy of the trend-following system. مؤشر
مؤشر
مؤشر
SVKO CFD Stocks & NQ-ES Real VolumeSVKO CFD Stocks & NQ-ES Real Volume replaces broker CFD volume with native stock volume or a configurable activity proxy for Nasdaq 100 and S&P 500 CFDs. It can also use the selected external volume to calculate an optional Real VWAP on the CFD price.
█ OVERVIEW
For a stock CFD, the indicator can use the corresponding exchange-listed share volume. For an index CFD, it can combine Micro E-mini futures, E-mini futures, and a major tracking ETF with user-defined positive weights.
The NQ and ES result is a transparent activity proxy. It does not claim to reconstruct an official consolidated index-volume measurement.
█ HOW IT WORKS
The indicator selects the Volume formulas entry whose left side matches the current standard chart ticker. Each term on the right can be a complete TradingView ticker, a configured abbreviation, or a positively weighted symbol.
TRADENATION:NVDA.EX = NASDAQ:NVDA
The default Nasdaq 100 example, `MNQ + 10*NQ + 60*QQQ`, follows the author's practical normalisation by typical relative leverage and exposure. QQQ receives the largest coefficient because it typically has the least leverage, while MNQ and NQ provide greater leveraged exposure. NQ receives a coefficient of 10 because one NQ contract is exactly ten times the size of one MNQ contract. The coefficient of 60 for QQQ is the author's adjustable example for bringing its activity with less leverage onto a comparable scale. The S&P 500 example uses the same reasoning with MES, ES, and SPY. These weights express the author's proxy logic and can be changed. They are not a conversion defined by an exchange.
Each unique active source is requested once per chart update. Repeated sources are combined before requests. Missing sources can contribute zero after they have produced valid data, while remaining sources continue to contribute.
External volume is displayed as standard up and down columns in a dedicated pane. The optional Real VWAP uses this calculated "real" volume, including all active formula weights, to weight the current CFD's price. It can follow either a main-session or full-session anchor.
█ MAPPING AND FALLBACK
An explicit volume formula always has priority. This supports precise stock mappings, deliberately selected sources, and weighted index proxies.
When no formula matches, supported broker charts can use SVKO CFD Symbol Mapper as a one-symbol fallback. Connect 1st code to Map: 1st code and 2nd code to Map: 2nd code from the same Mapper instance.
█ HOW TO USE
• Add the indicator to a standard time-based chart.
• Check whether Volume formulas already contains the chart symbol or one of its abbreviations.
• Add or edit a formula when a specific source or weighted proxy is required.
• Add SVKO CFD Symbol Mapper and connect both code inputs when the general stock-CFD fallback is required.
• Use TradingView's Style tab to configure the volume columns and Real VWAP.
• Choose the session anchor used by Real VWAP.
█ LIMITATIONS
A stock source represents the reported volume of the selected TradingView symbol. A multi-source NQ or ES formula is a user-defined weighted proxy, not an exchange-defined consolidated volume value.
Feed availability, delays, subscription permissions, sessions, and bar alignment can differ between sources. Missing data can make the result incomplete. Current volume and Real VWAP can change until an open realtime bar closes. No future data is used.
Session-anchored VWAP contains less intraday detail on daily and higher timeframes. Unsupported charts and unresolved Mapper results draw nothing and make no fallback volume request.
█ ALERTS
This indicator does not define alert conditions.
█ CREDITS AND LICENCE
Original work by SVKO. Published open source under the Mozilla Public License 2.0. مؤشر
Compact Trending Scanner Tiene configurados:
SPY, AMD, AAPL, NVDA, TSLA, GOOGL, META, AMZN, TSM, PLTR, MRVL, SNDK, MU, INTC, HOOD, ARM, DELL y SPCX
Los ordena automáticamente según una combinación de movimiento porcentual, ADX y alineación. Muestra:
Precio.
Movimiento porcentual contra el cierre anterior.
ADX.
Above, Below, Inside o Cross respecto al día anterior.
Posición respecto al premarket.
Posición respecto al rango de 5 minutos.
RVOL de la vela contra las últimas 20 velas.
Tendencia Bull, Bear o Wait. مؤشر
MTF Bull/Bear TableMTF Bull/Bear Table — Multi-Timeframe Confluence Scanner
OVERVIEW
This tool scans a custom watchlist of symbols across five timeframes at once
(5m, 15m, 1h, 4h, 1D) and displays the result as a single table, so you can
read directional confluence across your whole list at a glance instead of
flipping through charts one by one.
For each symbol/timeframe pair, the script classifies trend state as:
BULL — price is above both the fast MA and the slow MA
BEAR — price is below both the fast MA and the slow MA
NEUTRAL — price is on opposite sides of the two MAs (mixed signal)
By default the fast MA is a 20-period SMA and the slow MA is a 200-period
SMA, the classic short-term/long-term trend pair — price above both means
both timeframes agree the trend is up, price below both means they agree
it's down, and a mixed reading flags a timeframe that's transitioning or
consolidating. Both MA lengths are adjustable in the settings.
HOW TO READ THE TABLE
Each row is one symbol. Reading left to right:
TICKER the instrument
PRICE current live price (read from the daily context; it
updates in real time and is not a fixed daily close)
24H% / 1H% / 4H% percentage change since the last completed candle close
on that timeframe (daily / 1h / 4h respectively), colored
by sign. This is not a fixed rolling window — the actual
elapsed time varies depending on where price currently
sits within the still-forming candle (e.g. "24H%" can
reflect anywhere from a few minutes to nearly 24 hours
of movement, depending on the time of day).
5M / 15M / 1H / 4H / D trend state for each timeframe, color-coded:
green = BULL, red = BEAR, gray = NEUTRAL
Reading a row across the five timeframe columns shows you confluence at a
glance: five green cells is trend alignment from intraday noise all the way
up to the daily chart — a high-conviction directional read. A mix of colors
means timeframes disagree, which typically means either a transition in
progress or a level currently being tested.
This is a screening and context tool, not a standalone entry signal — it
tells you which timeframes agree and which don't, not where to place a
trade. Combine it with your own setup criteria (structure, volume, price
action) for actual entries.
SETTINGS
Symbols comma-separated list with full exchange prefix
(e.g. HYPERLIQUID:BTCUSDC.P). TradingView cannot read your
saved watchlist programmatically, so the list is entered
directly in the script settings.
Fast / Slow MA length default 20 / 200, adjustable
Table position corner of the chart the table is drawn in
Show price columns toggle price/change columns on or off
LIMITATIONS
TradingView caps every script at a fixed number of unique request.security()
calls — 40 on non-Pro plans, 64 on Pro/Expert/Ultimate. This script uses one
call per symbol per timeframe (5 timeframes), so the practical ceiling is
roughly 8 symbols on a non-Pro plan and ~12 on Pro. Trim the symbol list to
fit your plan; the script will show "N/A" for any symbol it fails to resolve
rather than breaking the whole table.
Percentage-change values for 24H/1H/4H are pulled from the same requests
already used for the trend classification, so they add no extra request
cost beyond the base 5-per-symbol. مؤشر
Clean EMA Pullback Indicator v6The Clean EMA Pullback Indicator v6 is a trend-following and pullback confirmation indicator designed for traders who want a simple, objective way to identify high-probability continuation trades. It combines moving average trend analysis, market structure, multi-timeframe confirmation, and price action into a single, easy-to-read indicator.
Unlike indicators that generate frequent signals, this script is designed to filter out lower-quality setups and only alert when multiple conditions align.
Features
📈 Trend Identification
Dynamic 200 EMA that changes color:
🟢 Green = Bullish trend
🔴 Red = Bearish trend
20 EMA Pullback Channel to identify retracement zones.
50 EMA for additional trend alignment and confirmation.
📊 Market Structure
Automatically identifies key swing structure:
Higher High (HH)
Higher Low (HL)
Lower High (LH)
Lower Low (LL)
This helps traders visually confirm whether the market is making bullish or bearish price structures.
🎯 Entry Signals
The indicator generates:
BUY signals after a confirmed bullish pullback and breakout.
SELL signals after a confirmed bearish pullback and breakdown.
Signals are based on trend direction, EMA alignment, pullback confirmation, and market structure—not simply moving average crossovers.
🔄 Optional Re-Entry Signals
Optional re-entry triangles identify opportunities to rejoin an existing trend after a healthy pullback, allowing traders to participate in continuation moves without chasing price.
🕯 Trend Candle Coloring
Candles are color-coded to quickly show whether momentum favors buyers or sellers, making trend recognition easier at a glance.
📋 Multi-Timeframe Dashboard
Displays trend direction for:
15 Minute
30 Minute
4 Hour
The dashboard also provides an overall alignment status:
✅ Strong Buy
✅ Strong Sell
⚠ Mixed
This helps traders avoid trading against higher-timeframe momentum.
📅 Previous Day Range
Plots:
Previous Day High
Previous Day Low
These levels often act as key support, resistance, breakout, or reversal areas.
📦 Trend-Filtered Fair Value Gaps (FVG)
Automatically highlights Fair Value Gaps that align with the current 200 EMA trend, helping traders focus on higher-probability imbalance zones while filtering out counter-trend gaps.
📏 ATR Trade Management
Built-in ATR-based trade management automatically plots:
Entry level
Stop Loss
Take Profit 1
Take Profit 2
This provides a consistent, rules-based framework for managing risk and reward.
Best Used For
Futures (MNQ, NQ, RTY, M2K, ES, MES, GC, MGC)
Forex
Stocks
ETFs
Cryptocurrency
Recommended for intraday trading on 1-minute, 3-minute, 5-minute, and 15-minute charts while using higher timeframes for trend confirmation.
Trading Philosophy
This indicator is built around a simple principle:
Trade with the trend, wait for the pullback, and enter only after the market confirms continuation.
Rather than predicting market direction, the script is designed to help traders remain patient, reduce emotional decision-making, and focus on disciplined, high-quality setups.
Disclaimer: This indicator is intended as a decision-support tool and should not be considered financial advice. Always practice sound risk management and test any strategy thoroughly before using it in a live trading environment. مؤشر
DNSE VN301!, Donchian Break Out Strategy"Donchian Channel Breakout with SMA Trend Filter" is a trend-following breakout strategy designed to capture sustained price movements while filtering out low-probability signals. The Donchian Channel identifies breakouts by tracking the highest high and lowest low over a specified lookback period, generating potential entry signals when price closes outside the recent trading range. Because breakouts during sideways or low-volatility markets often fail, the strategy incorporates a Simple Moving Average (SMA) as a trend filter.
Long signals are prioritized when the SMA is rising, while Short signals are prioritized when the SMA is falling, ensuring trades align with the prevailing market trend. By combining breakout detection with trend confirmation, the strategy aims to reduce false breakouts and improve overall signal quality.
*By default: each VN Futures contract requires VND 30,000,000 of initial margin. The strategy assumes an initial capital of VND 100,000,000, resulting in a fixed position size of 3 contracts for each trading signal.
To better reflect real-market trading conditions, the backtest incorporates a commission of VND 10,000 per contract and a minimum slippage assumption of 3 ticks on every executed trade.
Settings & Strategy Configuration:
Chart: recommended 15-minute timeframe
Donchian Channel Period: 20
SMA Period: 200
Stop Loss: 10 points
Take Profit: 20 points
SMA Trend Filter: On / Off
Use Take Profit: On / Off
Time Filter: On / Off
Trading Session: 09:00 – 14:30
Trade Direction: Long / Short / Both
Default Script Settings:
The strategy calculates the upper and lower bands of the Donchian Channel using the selected lookback period. A breakout above the upper band may indicate buying pressure, while a breakout below the lower band may indicate selling pressure.
When the SMA(200) trend filter is enabled, the script only allows Long entries when SMA(200) is rising and only allows Short entries when SMA(200) is falling. When the SMA filter is disabled, the strategy can trade both directions based only on Donchian Channel breakout signals.
Entry & Exit Conditions:
Entry Long:
Close Price > Upper Donchian Channel
AND SMA(200) is rising, if the SMA filter is enabled
AND the signal appears within the selected trading session
AND Long trading is allowed by the trade direction setting
Exit Long:
Stop Loss: 10 points from entry price
Take Profit: 20 points from entry price, if enabled
Opposite Donchian breakout signal
Position reversal when a valid Short signal appears
Automatic close at the end of the trading session
Entry Short:
Close Price < Lower Donchian Channel
AND SMA(200) is falling, if the SMA filter is enabled
AND the signal appears within the selected trading session
AND Short trading is allowed by the trade direction setting
Exit Short:
Stop Loss: 10 points from entry price
Take Profit: 20 points from entry price, if enabled
Opposite Donchian breakout signal
Position reversal when a valid Long signal appears
Automatic close at the end of the trading session
Disclaimers:
Trading futures contracts carries a high degree of risk, and price movements can be highly volatile. This script is intended as a reference and research tool only. It should be used by individuals who understand futures trading, have assessed their own risk tolerance, and are knowledgeable about the strategy’s logic.
All investment decisions are the sole responsibility of the user. DNSE bears no liability for any potential losses incurred from applying this strategy in real trading. Past performance does not guarantee future results.
______________________________________________________________________
"Chiến lược Breakout Donchian Channel kết hợp bộ lọc xu hướng SMA" là một chiến lược giao dịch theo xu hướng, được thiết kế nhằm tận dụng các đợt bứt phá giá mạnh đồng thời giảm thiểu các tín hiệu nhiễu. Donchian Channel xác định các điểm breakout bằng cách theo dõi mức giá cao nhất và thấp nhất trong một khoảng thời gian xác định, từ đó tạo tín hiệu khi giá đóng cửa vượt ra khỏi vùng dao động gần nhất. Do các tín hiệu breakout trong giai đoạn thị trường đi ngang hoặc biến động thấp thường có xác suất thất bại cao, chiến lược sử dụng thêm đường trung bình động đơn giản (SMA) làm bộ lọc xu hướng.
Khi đường SMA đang dốc lên, chiến lược ưu tiên các tín hiệu Long; ngược lại, khi SMA dốc xuống, chiến lược ưu tiên các tín hiệu Short, giúp các lệnh giao dịch đi cùng xu hướng chính của thị trường. Bằng cách kết hợp tín hiệu breakout với xác nhận xu hướng, chiến lược hướng tới việc giảm các tín hiệu phá vỡ giả và nâng cao chất lượng giao dịch.
*Theo mặc định, mỗi hợp đồng VN Futures yêu cầu ký quỹ ban đầu là 30.000.000 VNĐ. Chiến lược giả định vốn ban đầu là 100.000.000 VNĐ, tương ứng với quy mô vị thế cố định là 3 hợp đồng cho mỗi tín hiệu giao dịch được tạo ra.
Để phản ánh sát hơn điều kiện giao dịch thực tế, kết quả kiểm định (backtest) được giả định với phí giao dịch là 10.000 VNĐ cho mỗi hợp đồng và độ trượt giá (slippage) tối thiểu là 3 bước giá (ticks) đối với mỗi lệnh được khớp.
Cài đặt & cấu hình chiến lược:
Biểu đồ: khuyến nghị khung 15 phút
Chu kỳ Donchian Channel: 20
Chu kỳ SMA: 200
Cắt lỗ: 10 điểm
Chốt lời: 20 điểm
Bộ lọc xu hướng SMA: Bật / Tắt
Dùng chốt lời: Bật / Tắt
Bộ lọc giờ: Bật / Tắt
Khung giờ giao dịch: 09:00 – 14:30
Chiều giao dịch: Mua / Bán / Cả hai
Cài đặt mặc định của script:
Chiến lược tính toán biên trên và biên dưới của Donchian Channel dựa trên chu kỳ được chọn. Khi giá phá lên biên trên, lực mua có thể đang chiếm ưu thế. Khi giá phá xuống biên dưới, lực bán có thể đang chiếm ưu thế.
Khi bật bộ lọc xu hướng SMA(200), script chỉ cho phép lệnh Mua khi SMA(200) dốc lên và chỉ cho phép lệnh Bán khi SMA(200) dốc xuống. Khi tắt bộ lọc SMA, chiến lược có thể giao dịch cả hai chiều chỉ dựa trên tín hiệu breakout của Donchian Channel.
Điều kiện vào và thoát lệnh:
Vào lệnh Mua:
Giá đóng cửa > Biên trên Donchian Channel
VÀ SMA(200) dốc lên, nếu bật bộ lọc SMA
VÀ tín hiệu xuất hiện trong khung giờ giao dịch
VÀ chiều giao dịch cho phép lệnh Mua
Thoát lệnh Mua:
Cắt lỗ: 10 điểm từ giá vào lệnh
Chốt lời: 20 điểm từ giá vào lệnh, nếu bật
Có tín hiệu breakout ngược chiều
Đảo chiều khi xuất hiện tín hiệu Bán hợp lệ
Tự động đóng lệnh khi hết khung giờ giao dịch
Vào lệnh Bán:
Giá đóng cửa < Biên dưới Donchian Channel
VÀ SMA(200) dốc xuống, nếu bật bộ lọc SMA
VÀ tín hiệu xuất hiện trong khung giờ giao dịch
VÀ chiều giao dịch cho phép lệnh Bán
Thoát lệnh Bán:
Cắt lỗ: 10 điểm từ giá vào lệnh
Chốt lời: 20 điểm từ giá vào lệnh, nếu bật
Có tín hiệu breakout ngược chiều
Đảo chiều khi xuất hiện tín hiệu Mua hợp lệ
Tự động đóng lệnh khi hết khung giờ giao dịch
Tuyên bố rủi ro:
Giao dịch hợp đồng tương lai có mức độ rủi ro cao và giá có thể biến động mạnh. Script này chỉ phục vụ mục đích tham khảo, nghiên cứu và kiểm thử. Người dùng cần hiểu rõ giao dịch phái sinh, khẩu vị rủi ro cá nhân và logic của chiến lược trước khi áp dụng vào giao dịch thực tế.
Mọi quyết định đầu tư thuộc trách nhiệm của người dùng. DNSE không chịu trách nhiệm cho bất kỳ khoản lỗ nào phát sinh từ việc sử dụng chiến lược này trong giao dịch thực tế. Hiệu quả trong quá khứ không đảm bảo kết quả trong tương lai.
استراتيجية
MTF Trend Context
MTF Trend Context is a decision-support panel that answers one question before you trade: does the current context allow a trade at all? It does not generate entry signals — it tells you when trend alignment, trend strength, distance from value, volatility and time of day justify looking for one, and tells you to stand aside the rest of the time.
WHAT IT DOES
It reads the trend on your chart timeframe plus two higher timeframes and condenses everything into a single verdict at the bottom of the panel:
🟢 LONGS ONLY — all three timeframes aligned up and the market is trending
🔴 SHORTS ONLY — all three timeframes aligned down and the market is trending
🟡 STRETCHED — WAIT PULLBACK — aligned, but price is too far from VWAP to chase
🟡 CONFLICT — WAIT — timeframes disagree
⛔ RANGE — NO TRADE — ADX below threshold
⛔ OFF HOURS — NO TRADE — outside your personal trading window (optional filter)
HOW IT WORKS
Trend score per timeframe: three conditions worth ±1 each — price vs fast EMA (20), fast EMA vs slow EMA (50), and price vs session VWAP. A full score on the chart timeframe plus agreement on both higher timeframes is required for alignment. Higher timeframes are picked automatically (5m → 15m + 1h, 15m → 1h + 4h, etc.) or set manually. On daily and higher timeframes the VWAP component is excluded automatically and the maximum score adjusts accordingly.
Range filter: when ADX on the chart timeframe is below the threshold (default 20) the verdict is forced to RANGE regardless of alignment. Trend strength is shown as a 5-block bar (ADX 10 → empty, ADX 40 → full).
Stretched price (anti-FOMO): the session VWAP is anchored to the daily session open (on CME futures, the 18:00 ET Globex open) with ±1σ and ±2σ bands. Beyond 2σ the price is considered stretched and the verdict switches to WAIT PULLBACK.
Volatility with a time-of-day baseline: the current ATR is compared against its own average at the same time of day over the last N sessions (default 10), not against a flat rolling average. Intraday volatility is strongly seasonal — a flat average would make quiet sessions such as Asia read "low" permanently. 100% = normal for this time of day. It needs roughly N sessions of chart history to fill in.
Daily levels: previous day high, low, close and the current session open, drawn only for the current session with optional name labels. The panel shows the nearest level, its distance and direction, and warns when a level sits in the way of a trade.
Trend age: bars since the current alignment started, classified as young / mature / late, so you know whether you are early or chasing.
Trading-hours filter (optional): define your own window and timezone; outside it the verdict is NO TRADE and all alerts are muted.
Session row: shows whether Asia, London or New York is active.
NON-REPAINTING
Higher-timeframe readings use the last CONFIRMED higher-timeframe bar (request.security with a offset and lookahead), so the values shown on historical bars are exactly what you would have seen live. The cost is one higher-timeframe bar of lag; the benefit is an honest history.
ALERTS
Three alert conditions — traffic light GREEN (longs), traffic light RED (shorts), and entering RANGE — plus matching alert() events, so a single alert with "Any alert() function call" covers everything. Recommended trigger: "Once per bar close".
SETTINGS
Every chart element (EMAs, EMA cloud, VWAP line and bands, stretched-zone fill, level lines and labels) has its own visibility toggle, color and width. Panel rows can be hidden one by one; panel position and text size are configurable.
NOTES AND LIMITATIONS
Designed with CME index futures on intraday charts in mind; works on any symbol, but on 24/7 markets the "day" follows the exchange's daily bar.
Defaults are tuned for 5-minute charts. On quiet sessions consider lowering the ADX threshold to 17–18.
This is a context filter, not a strategy. It does not tell you where to enter or exit, and a green or red verdict is not a prediction about any individual trade. مؤشر
مؤشر
مؤشر
