OPEN-SOURCE SCRIPT
FVG Sniper [JOAT]
═══ FVG SNIPER [JOAT] ═══
A complete Fair Value Gap engine that finds price imbalances, grades their quality, tracks how they fill, mitigate and invert, and then paints a full trade blueprint the moment a clean setup fires. One gap is spotlighted as the strongest, and every signal arrives with entry, three targets, a stop, and colored risk/reward zones — no arrows, no clutter.
▎ WHAT IT DOES
FVG Sniper detects three-candle fair value gaps (imbalances), scores each one from 0–10, and monitors its life cycle: how much of the gap has been filled, whether it has been mitigated (wick-tapped through), and whether price has closed fully through it to flip its role into an Inverted FVG (IFVG). When a graded gap produces a rejection or an IFVG flip that agrees with the higher-timeframe bias, it draws a structured trade plan and reports the whole picture in a dashboard.
▎ HOW IT WORKS
• Gap detection — a bullish gap forms when the current low sits above the high from two bars back; a bearish gap forms when the current high sits below the low from two bars back.
• Quality filters — each candidate must clear a minimum gap size (as a multiple of ATR) and a minimum displacement body ratio on the impulse candle, so tiny or weak imbalances are ignored.
• Grade (0–10) — blends gap size, the displacement range of the middle candle, and relative volume into a single score. Only gaps at or above your minimum grade may fire a signal.
• Fill & mitigation — the engine tracks the running extreme inside each gap to compute a live fill percentage, and marks a gap mitigated once a wick fully traverses it.
• Inversion (IFVG) — when price closes fully through a gap, its role flips; the box restyles to a dashed amber accent and the flip is logged.
• Signals — two sources you can mix or isolate: Rejection (price retraces into a live gap and reacts back out with a directional close) and IFVG Flip (a mitigated gap is closed through, confirming continuation).
• HTF bias filter — an optional higher-timeframe EMA bias must agree with the signal direction before it is allowed.
• Trade model — on a fresh signal it sets entry at close, a stop either gap-protected (just beyond the triggering gap boundary) or ATR-based, with risk clamped between a floor and a cap. Targets TP1/TP2/TP3 are placed at your chosen R multiples.
• Non-repainting — all detection, scoring and signals evaluate on confirmed (closed) bars only, and the HTF request uses no lookahead.
▎ HOW TO USE IT
• Trade in the direction of the BUY / SELL pill. The stars and score on the pill show the grade of the gap that triggered it.
• The entry line (chrome), dashed stop, and TP1/TP2/TP3 lines map the plan directly on the chart; level labels on the right print exact prices and R values.
• The green zone is the target/reward area from entry to TP3; the red zone is the risk area between entry and stop — a fast visual read of the trade's R:R.
• A single ★ spotlight tags only the strongest active gap, so you always know the best imbalance in view.
• Use live gaps as decision zones: watch the fill % of the nearest gap, and treat an IFVG flip as a shift in short-term control.
• When a trade closes, a result label prints the outcome (TP hit, stop, or exit at R) so completed setups stay readable.
• Combine with your own structure, session and news context — the gap engine locates the where, you confirm the when.
▎ KEY SETTINGS
• Engine — enable bullish/bearish detection, choose the signal source (Rejection, IFVG Flip, or both), and cap how many gaps stay visible plus their lifetime and box extension.
• Filters — ATR length, minimum gap size, minimum displacement body ratio, minimum grade, the HTF bias filter (timeframe + EMA length), and whether a directional rejection close is required.
• Trade Model — stop basis (Gap-Protected vs ATR), stop buffer/distance, risk floor and cap, TP1–TP3 in R, max trade duration, zone projection, and how many completed trades to keep.
• Visuals — toggle gap boxes, midline, hide-mitigated declutter, grade spotlight, IFVG styling, signal pills, zone boxes, lines, level and result labels, zone-reader candle coloring, optional VWAP + σ bands, and all colors/transparency/sizes.
• Dashboard — show/hide, position, text size, and dark or light panel.
▎ DASHBOARD
The on-chart panel reports: HTF bias, count of active bullish and bearish gaps, the nearest gap price and its fill %, the strongest gap's star grade, the last IFVG flip (with bar age), the active signal, any live trade with its entry, and running totals of bullish / bearish / inverted gaps detected.
▎ ALERTS
• BUY signal
• SELL signal
• Bullish IFVG Flip (inversion up)
• Bearish IFVG Flip (inversion down)
▎ NOTES
• Works on all timeframes and all assets — indices, forex, crypto, stocks, futures.
• Signals and drawings are computed on closed bars, so they do not repaint after the bar confirms.
• Object caps and hide-mitigated / declutter toggles keep the chart clean even on long histories.
• Any on-chart result labels reflect historical signals only and are illustrative, not a performance guarantee.
For research and education only. This is not financial advice. No indicator can predict the future, and past behavior does not guarantee future results — always manage your own risk.
Made with passion by JackOfAllTrades ⚡
A complete Fair Value Gap engine that finds price imbalances, grades their quality, tracks how they fill, mitigate and invert, and then paints a full trade blueprint the moment a clean setup fires. One gap is spotlighted as the strongest, and every signal arrives with entry, three targets, a stop, and colored risk/reward zones — no arrows, no clutter.
▎ WHAT IT DOES
FVG Sniper detects three-candle fair value gaps (imbalances), scores each one from 0–10, and monitors its life cycle: how much of the gap has been filled, whether it has been mitigated (wick-tapped through), and whether price has closed fully through it to flip its role into an Inverted FVG (IFVG). When a graded gap produces a rejection or an IFVG flip that agrees with the higher-timeframe bias, it draws a structured trade plan and reports the whole picture in a dashboard.
▎ HOW IT WORKS
• Gap detection — a bullish gap forms when the current low sits above the high from two bars back; a bearish gap forms when the current high sits below the low from two bars back.
• Quality filters — each candidate must clear a minimum gap size (as a multiple of ATR) and a minimum displacement body ratio on the impulse candle, so tiny or weak imbalances are ignored.
• Grade (0–10) — blends gap size, the displacement range of the middle candle, and relative volume into a single score. Only gaps at or above your minimum grade may fire a signal.
• Fill & mitigation — the engine tracks the running extreme inside each gap to compute a live fill percentage, and marks a gap mitigated once a wick fully traverses it.
• Inversion (IFVG) — when price closes fully through a gap, its role flips; the box restyles to a dashed amber accent and the flip is logged.
• Signals — two sources you can mix or isolate: Rejection (price retraces into a live gap and reacts back out with a directional close) and IFVG Flip (a mitigated gap is closed through, confirming continuation).
• HTF bias filter — an optional higher-timeframe EMA bias must agree with the signal direction before it is allowed.
• Trade model — on a fresh signal it sets entry at close, a stop either gap-protected (just beyond the triggering gap boundary) or ATR-based, with risk clamped between a floor and a cap. Targets TP1/TP2/TP3 are placed at your chosen R multiples.
• Non-repainting — all detection, scoring and signals evaluate on confirmed (closed) bars only, and the HTF request uses no lookahead.
▎ HOW TO USE IT
• Trade in the direction of the BUY / SELL pill. The stars and score on the pill show the grade of the gap that triggered it.
• The entry line (chrome), dashed stop, and TP1/TP2/TP3 lines map the plan directly on the chart; level labels on the right print exact prices and R values.
• The green zone is the target/reward area from entry to TP3; the red zone is the risk area between entry and stop — a fast visual read of the trade's R:R.
• A single ★ spotlight tags only the strongest active gap, so you always know the best imbalance in view.
• Use live gaps as decision zones: watch the fill % of the nearest gap, and treat an IFVG flip as a shift in short-term control.
• When a trade closes, a result label prints the outcome (TP hit, stop, or exit at R) so completed setups stay readable.
• Combine with your own structure, session and news context — the gap engine locates the where, you confirm the when.
▎ KEY SETTINGS
• Engine — enable bullish/bearish detection, choose the signal source (Rejection, IFVG Flip, or both), and cap how many gaps stay visible plus their lifetime and box extension.
• Filters — ATR length, minimum gap size, minimum displacement body ratio, minimum grade, the HTF bias filter (timeframe + EMA length), and whether a directional rejection close is required.
• Trade Model — stop basis (Gap-Protected vs ATR), stop buffer/distance, risk floor and cap, TP1–TP3 in R, max trade duration, zone projection, and how many completed trades to keep.
• Visuals — toggle gap boxes, midline, hide-mitigated declutter, grade spotlight, IFVG styling, signal pills, zone boxes, lines, level and result labels, zone-reader candle coloring, optional VWAP + σ bands, and all colors/transparency/sizes.
• Dashboard — show/hide, position, text size, and dark or light panel.
▎ DASHBOARD
The on-chart panel reports: HTF bias, count of active bullish and bearish gaps, the nearest gap price and its fill %, the strongest gap's star grade, the last IFVG flip (with bar age), the active signal, any live trade with its entry, and running totals of bullish / bearish / inverted gaps detected.
▎ ALERTS
• BUY signal
• SELL signal
• Bullish IFVG Flip (inversion up)
• Bearish IFVG Flip (inversion down)
▎ NOTES
• Works on all timeframes and all assets — indices, forex, crypto, stocks, futures.
• Signals and drawings are computed on closed bars, so they do not repaint after the bar confirms.
• Object caps and hide-mitigated / declutter toggles keep the chart clean even on long histories.
• Any on-chart result labels reflect historical signals only and are illustrative, not a performance guarantee.
For research and education only. This is not financial advice. No indicator can predict the future, and past behavior does not guarantee future results — always manage your own risk.
Made with passion by JackOfAllTrades ⚡
Script de código aberto
Em verdadeiro espírito do TradingView, o criador deste script o tornou de código aberto, para que os traders possam revisar e verificar sua funcionalidade. Parabéns ao autor! Embora você possa usá-lo gratuitamente, lembre-se de que a republicação do código está sujeita às nossas Regras da Casa.
The AI Trading Ecosystem, Built to win trades 📈
Get Full Access 👇
jackofalltrades.vip 🌐
t.me/jackofalltradesvip 🃏
Get Full Access 👇
jackofalltrades.vip 🌐
t.me/jackofalltradesvip 🃏
Aviso legal
As informações e publicações não se destinam a ser, e não constituem, conselhos ou recomendações financeiras, de investimento, comerciais ou de outro tipo fornecidos ou endossados pela TradingView. Leia mais nos Termos de Uso.
Script de código aberto
Em verdadeiro espírito do TradingView, o criador deste script o tornou de código aberto, para que os traders possam revisar e verificar sua funcionalidade. Parabéns ao autor! Embora você possa usá-lo gratuitamente, lembre-se de que a republicação do código está sujeita às nossas Regras da Casa.
The AI Trading Ecosystem, Built to win trades 📈
Get Full Access 👇
jackofalltrades.vip 🌐
t.me/jackofalltradesvip 🃏
Get Full Access 👇
jackofalltrades.vip 🌐
t.me/jackofalltradesvip 🃏
Aviso legal
As informações e publicações não se destinam a ser, e não constituem, conselhos ou recomendações financeiras, de investimento, comerciais ou de outro tipo fornecidos ou endossados pela TradingView. Leia mais nos Termos de Uso.