OPEN-SOURCE SCRIPT
Liquidity Sweep Hunter | AlphaScript
💧 Liquidity Sweep Hunter
Liquidity Sweep Hunter maps the resting liquidity at swing highs and lows — the stop orders sitting just beyond obvious pivots — and detects when price raids it. It marks each level as resting, swept, or reclaimed, so you can see both where liquidity is waiting and when it gets taken.
💡 The idea behind it
Stop orders cluster just beyond swing highs and swing lows. Above a swing high sit the stops of short sellers and the buy orders of breakout traders — buy-side liquidity (BSL). Below a swing low sit the opposite — sell-side liquidity (SSL). Larger participants are drawn to these pools because that resting liquidity is what fills their orders. When price spikes through a level, takes the stops, and rejects back, that is a liquidity sweep — often the origin of a reversal. This tool identifies those events systematically instead of by eye.
🔍 How detection works
Levels are anchored to confirmed swing pivots (default lookback 10 bars each side). A swing high becomes a buy-side liquidity level; a swing low becomes a sell-side liquidity level. Pivots are only registered after they are fully confirmed, so levels do not repaint. Each level is drawn as a line and tagged so its state is always clear:
⇠ Resting — an unswept level. The stops are still sitting there; price may return to raid it. Tagged BSL ⇠ (above swing highs) or SSL ⇠ (below swing lows). These are potential targets.
✗ Swept — price wicked through the level but the bar closed back on the original side. The stops were taken and price rejected. Tagged ✗ BSL swept or ✗ SSL swept.
⟲ Reclaimed — price closed through the level, then on a later bar closed back across it: a failed break that reclaimed the level. Tagged ⟲ BSL reclaimed or ⟲ SSL reclaimed.
You choose the detection mode: Wick (sweeps only), Reclaim (break-and-reclaim only), or Both.
🎯 Penetration filter
An optional ATR-based filter requires price to pierce the level by a minimum multiple of ATR before an event qualifies. Because it is measured in ATR rather than fixed ticks, it means the same thing across every instrument — no re-tuning when you switch markets. Set to zero to disable.
🟠 Broken levels
In Reclaim and Both modes, a level that price closes through is kept on the chart in a distinct color and tagged while it awaits a possible reclaim — so you can see levels that failed but might still be reclaimed. These can be toggled off for a cleaner chart.
📊 Dashboard
A compact panel shows the current symbol, the number of active buy-side and sell-side levels being tracked, and the active detection mode. Theme (dark/light), size, and position are all configurable.
🎨 Customization
Full control over the look: colors for bullish/bearish events, level lines, and broken levels; line style and width for both level lines and event lines; label text color (for readability on light or dark charts); how far pending level lines extend; and toggles for level lines, event labels, pending-level tags, and broken levels.
📈 How to use it
Watch the resting (⇠) levels as the liquidity price may be drawn toward. When a swing high is swept (✗ BSL) after an up-move, buy-side liquidity has been taken and a move down may follow; a swept swing low (✗ SSL) can signal the reverse.
Reclaim events flag failed breaks that often precede a move back in the reclaim direction. Use the tags as points of interest to combine with your own structure read, higher-timeframe bias, and risk management — the tool shows where liquidity rests and when it is taken; you decide what to do with it.
🔔 Alerts
Separate alerts for SSL sweep, BSL sweep, SSL reclaim, BSL reclaim, plus combined "Any Sweep" and "Any Reclaim" conditions.
⚙️ Settings
Swing lookback, detection mode, ATR penetration filter, maximum active levels, level age limit, visible-event cap, recent-bars window for signal shapes, plus the full display and customization controls above.
📌 Notes
This tool detects liquidity at swing pivots specifically — individual swing highs and lows. It is one lens on liquidity and pairs naturally with equal-high/low and session-level analysis for a fuller picture. Events are confirmed on closed bars and do not repaint intrabar. A liquidity sweep marks where stops were taken, not a guaranteed reversal — always combine with your own analysis and risk management.
Liquidity Sweep Hunter maps the resting liquidity at swing highs and lows — the stop orders sitting just beyond obvious pivots — and detects when price raids it. It marks each level as resting, swept, or reclaimed, so you can see both where liquidity is waiting and when it gets taken.
💡 The idea behind it
Stop orders cluster just beyond swing highs and swing lows. Above a swing high sit the stops of short sellers and the buy orders of breakout traders — buy-side liquidity (BSL). Below a swing low sit the opposite — sell-side liquidity (SSL). Larger participants are drawn to these pools because that resting liquidity is what fills their orders. When price spikes through a level, takes the stops, and rejects back, that is a liquidity sweep — often the origin of a reversal. This tool identifies those events systematically instead of by eye.
🔍 How detection works
Levels are anchored to confirmed swing pivots (default lookback 10 bars each side). A swing high becomes a buy-side liquidity level; a swing low becomes a sell-side liquidity level. Pivots are only registered after they are fully confirmed, so levels do not repaint. Each level is drawn as a line and tagged so its state is always clear:
⇠ Resting — an unswept level. The stops are still sitting there; price may return to raid it. Tagged BSL ⇠ (above swing highs) or SSL ⇠ (below swing lows). These are potential targets.
✗ Swept — price wicked through the level but the bar closed back on the original side. The stops were taken and price rejected. Tagged ✗ BSL swept or ✗ SSL swept.
⟲ Reclaimed — price closed through the level, then on a later bar closed back across it: a failed break that reclaimed the level. Tagged ⟲ BSL reclaimed or ⟲ SSL reclaimed.
You choose the detection mode: Wick (sweeps only), Reclaim (break-and-reclaim only), or Both.
🎯 Penetration filter
An optional ATR-based filter requires price to pierce the level by a minimum multiple of ATR before an event qualifies. Because it is measured in ATR rather than fixed ticks, it means the same thing across every instrument — no re-tuning when you switch markets. Set to zero to disable.
🟠 Broken levels
In Reclaim and Both modes, a level that price closes through is kept on the chart in a distinct color and tagged while it awaits a possible reclaim — so you can see levels that failed but might still be reclaimed. These can be toggled off for a cleaner chart.
📊 Dashboard
A compact panel shows the current symbol, the number of active buy-side and sell-side levels being tracked, and the active detection mode. Theme (dark/light), size, and position are all configurable.
🎨 Customization
Full control over the look: colors for bullish/bearish events, level lines, and broken levels; line style and width for both level lines and event lines; label text color (for readability on light or dark charts); how far pending level lines extend; and toggles for level lines, event labels, pending-level tags, and broken levels.
📈 How to use it
Watch the resting (⇠) levels as the liquidity price may be drawn toward. When a swing high is swept (✗ BSL) after an up-move, buy-side liquidity has been taken and a move down may follow; a swept swing low (✗ SSL) can signal the reverse.
Reclaim events flag failed breaks that often precede a move back in the reclaim direction. Use the tags as points of interest to combine with your own structure read, higher-timeframe bias, and risk management — the tool shows where liquidity rests and when it is taken; you decide what to do with it.
🔔 Alerts
Separate alerts for SSL sweep, BSL sweep, SSL reclaim, BSL reclaim, plus combined "Any Sweep" and "Any Reclaim" conditions.
⚙️ Settings
Swing lookback, detection mode, ATR penetration filter, maximum active levels, level age limit, visible-event cap, recent-bars window for signal shapes, plus the full display and customization controls above.
📌 Notes
This tool detects liquidity at swing pivots specifically — individual swing highs and lows. It is one lens on liquidity and pairs naturally with equal-high/low and session-level analysis for a fuller picture. Events are confirmed on closed bars and do not repaint intrabar. A liquidity sweep marks where stops were taken, not a guaranteed reversal — always combine with your own analysis and risk management.
Script de código aberto
Em verdadeiro espírito do TradingView, o criador deste script o tornou de código aberto, para que os traders possam revisar e verificar sua funcionalidade. Parabéns ao autor! Embora você possa usá-lo gratuitamente, lembre-se de que a republicação do código está sujeita às nossas Regras da Casa.
Gabriel R. | AlphaScript
Aviso legal
As informações e publicações não se destinam a ser, e não constituem, conselhos ou recomendações financeiras, de investimento, comerciais ou de outro tipo fornecidos ou endossados pela TradingView. Leia mais nos Termos de Uso.
Script de código aberto
Em verdadeiro espírito do TradingView, o criador deste script o tornou de código aberto, para que os traders possam revisar e verificar sua funcionalidade. Parabéns ao autor! Embora você possa usá-lo gratuitamente, lembre-se de que a republicação do código está sujeita às nossas Regras da Casa.
Gabriel R. | AlphaScript
Aviso legal
As informações e publicações não se destinam a ser, e não constituem, conselhos ou recomendações financeiras, de investimento, comerciais ou de outro tipo fornecidos ou endossados pela TradingView. Leia mais nos Termos de Uso.