Candlestick Edge Auto-Preset MTF Self-CalibratingCandlestick Edge only fires a candlestick pattern when it is "rightly placed" — confirmed by a higher-timeframe trend AND by where price sits in the developing volume profile. Then it does what most pattern tools don't: it forward-tests every signal and reports the MEASURED edge per pattern, so you read realized performance instead of a marketing claim.
WHY THIS IS ONE TOOL (not a bundle)
The parts answer one question about one candle: "is this pattern in a place that has historically paid, and does it beat a coin-flip here?"
PATTERN detection says WHAT printed (24 classic candlestick patterns).
HTF ALIGNMENT says whether the bigger trend agrees.
VOLUME-PROFILE POSITIONING says WHERE it printed — reversals only at value-area edges, naked POC, HVN support/resistance, or liquidity sweeps; continuations only through low-volume voids or on a value breakout.
The CALIBRATION SPINE forward-resolves each signal with a triple barrier and reports Hit% vs a matched Base% (Edge) with a Wilson confidence interval, so a placed-and-confirmed pattern can be told apart from a small-sample fluke.
One pattern substrate, one location read, one calibration spine.
MEASUREMENT (the differentiator)
Each signal opens at close with target = ±TP·ATR, stop = ∓SL·ATR, over a fixed horizon. The first barrier touched decides win/loss (same-bar tie counts as the stop — conservative). Base% is the unconditional same-barrier win-rate for that direction. Edge = Hit% − Base%; a "*" marks rows whose Wilson 95% lower bound clears the base rate. A leave-one-out row prices each filter's marginal contribution, and a footer lists only the patterns that are green AND have enough samples to trust in the current configuration.
AUTO PRESET (default on)
Candlestick edges are timeframe-specific. Auto Preset reads the chart's timeframe and switches on the pattern subset plus higher-timeframe distance that performed best for that timeframe in the author's study of NSE index futures, and forces the two filters on. Turn it OFF for full manual research mode: all 24 patterns selectable, filters and HTF distance (3x / 5x / 15x / custom) under your control. Nothing is ever removed — the preset only curates which patterns are active by default per timeframe.
HOW TO USE
Leave Auto Preset on and read the labelled signals (teal = bullish, red = bearish, each tagged with the pattern name). Open "Show scoreboard" to see measured Edge per pattern — trust the EDGE column and the "*", never a raw hit-rate. Best behaviour is on intraday timeframes (1H and below).
ORIGINALITY
Standard techniques are credited below. What is original is the combination: a location-gated pattern engine whose every signal is forward-calibrated, a timeframe-adaptive auto-preset, a leave-one-out filter attribution, and an auto-surfaced tradeable set — measured edge, not asserted.
NON-REPAINT
Signals open on confirmed bars; triple-barrier outcomes resolve on bars AFTER the trigger; all higher-timeframe / lower-timeframe / prior-day-POC requests use lookahead_off and confirmed intrabars. Pivots used by sweeps confirm first.
DATA & MARKETS
Runs on any symbol that reports volume; the developing profile needs volume to be meaningful. Defaults are tuned for intraday index futures. On the Enhanced data tier the delta read uses intrabar aggregation (richer on paid plans) and auto-falls-back to an OHLCV proxy when intrabars aren't served — safe to leave on for any plan.
CONCEPT CREDITS (methods operationalized — original Pine re-derivations)
Candlestick patterns — Nison; pattern-performance framing per Bulkowski
Market / auction profile, POC / Value Area — Steidlmayer; Dalton
Bulk Volume Classification — Easley, Lopez de Prado & O'Hara (2012)
Triple-barrier labelling — Lopez de Prado
Wilson score interval — Wilson (1927)
HONESTY / LIMITS
The profile is an ATR-binned developing session profile (not tick POC). Delta is an estimate (proxy or intrabar reconstruction), not true bid/ask. Reported edge is context measured on loaded history — not a prediction or a promise. The preset defaults were tuned on one instrument over a recent window, so treat them as a well-measured hypothesis, not proven alpha.
Educational tool. Not financial advice — you alone are responsible for your trading decisions. Indicador
Indicador
Indicador
Indicador
Indicador
QT_Mehr_Aria V5Here's a publish-ready description — it presents the tool's features and how to use it, while keeping every proprietary rule out (consistent with the sanitized script). I'll save it in the repo docs too.
Saved to tradingview-description.md. Here's the text to paste into the TradingView publication:
QT_Mehr_Aria V5 — Quarterly Theory Cycles + Triad SMT
WHAT IT DOES
This indicator maps the market's time structure into nested cycles based on Quarterly Theory — from 22/23-minute micro cycles up to yearly and 4-year cycles — and scans a triad of three correlated instruments for SMT divergence at every scale. It draws cycle boundaries, quarter labels and True Opens, and prints signal and entry marks with configurable triggers and alerts.
CYCLES
Nine nested scales: Micro (22/23 min), 90-Minute, 6H, Daily, Weekly, Monthly, Quarterly, Yearly and 4-Year — all anchored to the New York 18:00 session open, DST-safe. On every chart timeframe the indicator works three tiers (LTF / MTF / HTF); higher scales can be shown optionally. Supported chart timeframes: 1m, 5m, 15m, 1h, 4h, Daily, Weekly and Monthly.
SMT DETECTION
Choose a triad preset (NQ/ES/YM · DXY/EU/GU · NQ/ES/NKD · BTC/ETH/SOL · DXY/6E/6B · GC/SI/HG · ZB/TN/ZF) or set three custom symbols. Each symbol is evaluated against its own reference level inside the cycle structure; when the triad disagrees, a divergence mark prints on the bar where it happened:
▽ bearish SMT · △ bullish SMT · ▼ / ▲ entry marks · ✕ invalidated signal · Ts true sweep (optional) · ▽? / △? forming on the live bar (optional)
Inverse-correlated triads (e.g., DXY against EU/GU) are handled automatically — custom triads get per-symbol inverse switches. Detection basis is selectable (wick, close, or wick+close confluence), and the entry trigger can be immediate or CISD close-through. A quarter-pair panel controls which quarter relationships are evaluated, and an optional True-Open premium/discount gate is included (off by default).
TRUE OPENS
TMSO, TSO (session), TDO (daily), TWO (weekly), TMO (monthly), TQO (quarterly) and TYO (yearly) — each drawn from the true opening price of its cycle, on the chart timeframes where it is tradeable.
QUARTER LABELS
A label row names each timeframe's quarters — micro quarters on 1m, up through days, weeks, months, calendar quarters and years on higher charts. One label per window, centered in the window.
SIGNAL CONTROL
The Signals group shows exactly what you want and nothing more: SMT marks, entry marks, invalidation ✕, TS marks, forming marks, and whether scales above your HTF tier draw at all. Per-cycle and per-tier visibility switches are separate. An experimental time-based signal filter is included (off by default).
ALERTS
Four static alert conditions (SMT bearish/bullish, CISD entry bearish/bullish) plus detailed alert() payloads carrying the scale, pair, symbols and cause — create the alert with "Any alert() function call". Alerts can be scoped to one scale or all.
NOTES
Chart one of the triad symbols for the cleanest reading; with an inverse member in the triad (e.g., DXY), signal direction reads from the other two symbols.
Time anchors are New York based; built around futures sessions and also usable on FX, crypto and stocks.
The top-right readout always shows the active triad and configuration.
Educational tool for time-based market analysis — not financial advice.
What it deliberately does not contain: how divergence is judged inside the quarters, the pair semantics, the close/wick reference rule, the inverse-mirroring mechanics, and the experimental filter's rules — those stay only in your local repo docs. It names features (which anyone can see in the settings panel anyway) and explains usage, which is what TradingView moderators require for protected-source publications.
خلاصه: متن توضیحات برای انتشار در تریدینگویو آماده شد — فقط قابلیتها و طرز استفاده را میگوید، هیچ قاعدهای از منطق پشت ابزار لو نمیرود. متن در docs/tradingview-description.md ذخیره شده؛ کافی است همین را در صفحهی انتشار کپی کنی.Here's a publish-ready description — it presents the tool's features and how to use it, while keeping every proprietary rule out (consistent with the sanitized script). I'll save it in the repo docs too.
Saved to tradingview-description.md. Here's the text to paste into the TradingView publication:
QT_Mehr_Aria V5 — Quarterly Theory Cycles + Triad SMT
WHAT IT DOES
This indicator maps the market's time structure into nested cycles based on Quarterly Theory — from 22/23-minute micro cycles up to yearly and 4-year cycles — and scans a triad of three correlated instruments for SMT divergence at every scale. It draws cycle boundaries, quarter labels and True Opens, and prints signal and entry marks with configurable triggers and alerts.
CYCLES
Nine nested scales: Micro (22/23 min), 90-Minute, 6H, Daily, Weekly, Monthly, Quarterly, Yearly and 4-Year — all anchored to the New York 18:00 session open, DST-safe. On every chart timeframe the indicator works three tiers (LTF / MTF / HTF); higher scales can be shown optionally. Supported chart timeframes: 1m, 5m, 15m, 1h, 4h, Daily, Weekly and Monthly.
SMT DETECTION
Choose a triad preset (NQ/ES/YM · DXY/EU/GU · NQ/ES/NKD · BTC/ETH/SOL · DXY/6E/6B · GC/SI/HG · ZB/TN/ZF) or set three custom symbols. Each symbol is evaluated against its own reference level inside the cycle structure; when the triad disagrees, a divergence mark prints on the bar where it happened:
▽ bearish SMT · △ bullish SMT · ▼ / ▲ entry marks · ✕ invalidated signal · Ts true sweep (optional) · ▽? / △? forming on the live bar (optional)
Inverse-correlated triads (e.g., DXY against EU/GU) are handled automatically — custom triads get per-symbol inverse switches. Detection basis is selectable (wick, close, or wick+close confluence), and the entry trigger can be immediate or CISD close-through. A quarter-pair panel controls which quarter relationships are evaluated, and an optional True-Open premium/discount gate is included (off by default).
TRUE OPENS
TMSO, TSO (session), TDO (daily), TWO (weekly), TMO (monthly), TQO (quarterly) and TYO (yearly) — each drawn from the true opening price of its cycle, on the chart timeframes where it is tradeable.
QUARTER LABELS
A label row names each timeframe's quarters — micro quarters on 1m, up through days, weeks, months, calendar quarters and years on higher charts. One label per window, centered in the window.
SIGNAL CONTROL
The Signals group shows exactly what you want and nothing more: SMT marks, entry marks, invalidation ✕, TS marks, forming marks, and whether scales above your HTF tier draw at all. Per-cycle and per-tier visibility switches are separate. An experimental time-based signal filter is included (off by default).
ALERTS
Four static alert conditions (SMT bearish/bullish, CISD entry bearish/bullish) plus detailed alert() payloads carrying the scale, pair, symbols and cause — create the alert with "Any alert() function call". Alerts can be scoped to one scale or all.
NOTES
Chart one of the triad symbols for the cleanest reading; with an inverse member in the triad (e.g., DXY), signal direction reads from the other two symbols.
Time anchors are New York based; built around futures sessions and also usable on FX, crypto and stocks.
The top-right readout always shows the active triad and configuration.
Educational tool for time-based market analysis — not financial advice.
What it deliberately does not contain: how divergence is judged inside the quarters, the pair semantics, the close/wick reference rule, the inverse-mirroring mechanics, and the experimental filter's rules — those stay only in your local repo docs. It names features (which anyone can see in the settings panel anyway) and explains usage, which is what TradingView moderators require for protected-source publications.
Indicador
RSI Market Structure Zones ProPlease read how to use it. red before use.
RSI Momentum Zones Pro
Professional RSI Confirmation Indicator for Trend, Reversal & Scalping
Author: Forex_Market_Insights
Overview
RSI Momentum Zones Pro is a professional momentum analysis indicator developed to simplify RSI interpretation by dividing market momentum into four institutional trading zones instead of relying solely on the traditional overbought and oversold approach.
Rather than treating RSI as a simple oscillator, this indicator classifies momentum into Over Bought, Resistance, Support, and Over Sold regions to help traders understand where price is statistically more likely to continue, slow down, reject, or reverse after receiving price action confirmation.
The indicator is designed for discretionary traders who combine momentum analysis with candlestick confirmation instead of using RSI crossovers alone.
It is suitable for scalping, intraday trading, swing trading and multi-timeframe analysis.
Core Concept
Traditional RSI indicators only highlight the 70 and 30 levels, which often generate premature or unreliable signals during strong market trends.
This indicator expands RSI interpretation by introducing four structured momentum zones:
Over Bought (80)
Resistance (68)
Support (35)
Over Sold (20)
These additional zones allow traders to evaluate market strength in greater detail before making trading decisions.
Instead of assuming every overbought or oversold condition will immediately reverse, the indicator encourages confirmation through actual price behavior.
Indicator Structure
The RSI panel contains four clearly defined institutional-style levels:
OVER BOUGHT (80)
Represents an extreme bullish momentum zone.
Price entering this area suggests that buying pressure has become unusually strong.
This does not automatically indicate a sell signal.
Instead, traders should wait for bearish confirmation before considering a short position.
RESISTANCE (68)
Represents an upper momentum resistance area.
Momentum is considered strong, but not yet at an extreme.
This zone is useful for identifying potential exhaustion during bullish trends while still allowing trend continuation if buying pressure remains strong.
SUPPORT (35)
Represents a lower momentum support area.
Momentum has weakened but has not yet reached extreme bearish conditions.
This area frequently serves as an early accumulation zone where buyers may begin regaining control.
OVER SOLD (20)
Represents an extreme bearish momentum condition.
Selling pressure has reached unusually high levels.
Rather than immediately buying, traders should wait for bullish confirmation from price before entering a long position.
Dynamic RSI Visualization
The RSI line changes color according to momentum direction.
Green RSI Line
Indicates that RSI is rising and bullish momentum is strengthening.
Red RSI Line
Indicates that RSI is falling and bearish momentum is increasing.
This dynamic visualization allows traders to recognize momentum shifts without relying solely on numerical RSI values.
Trading Algorithm
The indicator does not generate trading signals simply because RSI reaches a certain level.
Instead, it follows a confirmation-based workflow.
Bullish Setup
A potential Buy opportunity is considered when:
RSI reaches the Support zone (35) or the Over Sold zone (20).
A strong bullish candle closes after momentum stabilizes.
Price confirms that buyers are beginning to regain control.
This confirmation-based approach helps reduce entries during ongoing bearish momentum.
Bearish Setup
A potential Sell opportunity is considered when:
RSI reaches the Resistance zone (68) or the Over Bought zone (80).
A strong bearish candle closes after bullish momentum weakens.
Price confirms increasing selling pressure.
This helps filter out false reversals during strong uptrends.
Momentum Confirmation Philosophy
One of the primary design goals of this indicator is to avoid trading solely based on RSI values.
Instead of assuming:
RSI reached 20 → Buy
or
RSI reached 80 → Sell
the indicator expects traders to combine RSI zones with actual market structure and candlestick confirmation.
This confirmation-first methodology is intended to reduce low-probability entries.
Hidden Momentum Concept
Momentum reversals do not always occur simultaneously on price and RSI.
Occasionally:
Price may create a new swing low while RSI does not.
RSI may create a new swing low while price remains relatively stable.
Likewise, the same behavior can occur near market highs.
These situations often indicate weakening momentum and can provide early evidence that trend strength is fading.
This indicator is designed to help traders visually identify these momentum shifts while combining them with price action confirmation before executing trades.
Multi-Timeframe Usage
Although the indicator performs well on lower timeframes such as the 1-minute chart, its underlying momentum framework is applicable across all TradingView-supported timeframes.
Many traders use:
1 Minute for scalping
5 Minute for intraday trading
15 Minute for short-term trend trading
Higher timeframes for broader market context
Using higher timeframe trend direction together with lower timeframe RSI confirmations may improve trade selection.
Practical Trading Workflow
A typical workflow may include:
Observe which RSI zone the market is approaching.
Wait for price action confirmation.
Confirm momentum direction using the RSI line color.
Enter only after the confirmation candle closes.
Manage risk using appropriate stop-loss placement and position sizing.
The indicator is intended to assist discretionary decision-making rather than automate entries.
Best Market Conditions
The indicator is particularly useful during:
Intraday trading
Scalping
Trending markets
Pullback trading
Momentum continuation setups
Reversal confirmation
Multi-timeframe analysis
Risk Notice
No technical indicator can predict future price movement with certainty.
RSI Momentum Zones Pro is designed as a decision-support tool and should be used alongside sound risk management, price action analysis, and overall market context.
It is not intended to be used as a standalone trading system, and traders should always confirm setups before entering positions.
Original Development
RSI Momentum Zones Pro has been independently designed and implemented by Forex_Market_Insights. The indicator combines structured RSI zoning, dynamic momentum visualization, and confirmation-based trading principles into a single workflow intended to improve momentum interpretation while remaining intuitive for discretionary traders. Indicador
Indicador
Indicador
Indicador
[Core Convexity] SMT Divergences
## Description
The SMT Divergences indicator is a comprehensive tool designed to detect and manage Smart Money Tool (SMT) divergences across multiple assets directly on your primary chart. SMT divergence is a classic concept used to identify institutional accumulation or distribution by revealing a lack of correlation between highly correlated assets (such as NQ, ES, and YM, or Gold and Silver) at key structural swing points.
This script automates the detection process, filters out duplicate signals, and tracks mitigation (when an SMT structure is broken or invalidated by price action) to keep your charts clean and actionable.
### Key Features
* **Automatic Asset Pairing:** Detects the root symbol of your current chart and automatically pulls data for the most relevant correlated instruments. For example, if you are viewing NQ, it will automatically check ES and YM. It also features a dedicated "No YM" mode to simplify index correlation down to NQ and ES exclusively.
* **Custom Asset Input:** Switch the selection mode to "Custom" to manually input any two symbols you wish to compare against your primary chart.
* **Dual-Layer Detection:** The script scans both immediate pivot points and structural swings (Highs/Lows) to provide both near-term and macro SMT identification.
* **Dynamic Mitigation Stack:** When price invalidates an SMT level, the indicator can immediately remove the visual lines or keep them on the chart for a specified expiration window with a configurable tag to track historical structural breaches.
* **Advanced Merging Logic:** To eliminate chart clutter, the script includes options to merge duplicate rays triggering on the same candle, as well as merging same-origin SMTs into a single combined projection point.
---
## How It Works
An SMT Divergence occurs when one asset fails to confirm a new swing high or low made by a correlated asset:
* **Bearish SMT:** The primary asset fails to make a higher high while the correlated asset successfully drives to a higher high, indicating underlying weakness.
* **Bullish SMT:** The primary asset fails to make a lower low while the correlated asset successfully drives to a lower low, indicating underlying strength.
The script runs a safe lookback sequence up to 450 bars to find matching historical pivot structures, compares the relationship between the primary chart and your secondary/tertiary assets, and plots precision lines directly between the corresponding structural points.
---
## Settings and Inputs
### System
* **Real-Time Detection:** When enabled, calculations update dynamically on the live, open bar. When disabled, signals confirm strictly on the close of the candle.
* **Merge Duplicate Rays:** If both tracked assets trigger an SMT divergence on the exact same bar, this option condenses them into a single line with a combined text label.
* **Merge Same-Origin SMTs:** Combines multiple SMT lines originating from the exact same candle, extending the line to the furthest matching historical point and appending an (M) tag.
* **Enable Structure SMT:** Expands the algorithm to look for structural pivot failures in addition to immediate, strict candle-to-candle alignment.
* **Lookback:** Determines how many historical bars the script will scan to find a matching structural pivot point (capped safely up to 500 bars).
* **Min Bars for Line/Label:** Configures the strict visual threshold required before rendering a line or a text label to screen, filtering out negligible, noise-level divergences.
### Broken SMT Mitigation
* **Remove Broken SMTs:** Activates the garbage collection system to handle lines when price violates the divergence level.
* **Bars to Keep After Invalidation:** Determines how long a broken SMT line remains visible on your chart before deletion. Set this to 0 for immediate visual removal.
* **Show (X) Tag on Invalidated:** Appends an (X) character to the text labels of broken levels during their expiration window.
* **Mitigation Logic:** Choose between "Pair Only (Strict)" which invalidates the line if the primary chart and the specific asset break structure, or "All Connected (Global)" which requires all three assets to breach the level before declaring an invalidation.
### Asset Selection and Styling
* **Asset Selection Mode:** Toggle between Automatic, Automatic (No YM), or Custom routing.
* **Check Mode:** Options include "Strict" (where bullish lines check highs and bearish lines check lows) or "Both High & Low" for unrestricted pivot mapping.
* **Styling Groups:** Fully customize visibility, font sizes, colors, line widths, and line styles (Solid, Dashed, Dotted) independently for both Asset 1 and Asset 2 configurations. Indicador
Indicador
Indicador
Indicador
Fair Value Gap MarkerFair Value Gap Marker
Overview
Fair Value Gap Marker is a configurable market imbalance visualization tool designed to automatically detect, evaluate, and manage Fair Value Gaps (FVGs) using a three-candle price imbalance model. While the Fair Value Gap concept is widely recognized in technical analysis, this implementation expands the basic detection model by introducing adaptive volatility filtering, quantitative strength scoring, multi-timeframe analysis, and automated zone lifecycle management.
The objective of the indicator is not to display every possible imbalance, but to help traders focus on higher-quality Fair Value Gaps by filtering insignificant gaps and providing additional contextual information about each detected zone.
---
What is a Fair Value Gap?
A Fair Value Gap represents a temporary market inefficiency created when price moves aggressively enough that little or no trading occurs within a specific price range.
Such rapid displacement can leave an imbalance between buyers and sellers. Many traders monitor these areas because price may revisit them later before continuing its trend or establishing a reversal.
Rather than manually inspecting charts for these imbalances, Fair Value Gap Marker continuously scans completed candles and automatically identifies qualifying bullish and bearish Fair Value Gaps.
---
# Detection Algorithm
The indicator evaluates every completed three-candle sequence.
A Bullish Fair Value Gap is identified when the current candle's low remains above the high of the candle two bars earlier.
A Bearish Fair Value Gap is identified when the current candle's high remains below the low of the candle two bars earlier.
Only confirmed candle data is evaluated, ensuring that detected Fair Value Gaps remain stable once created.
---
# Adaptive Minimum Gap Filtering
Not every Fair Value Gap has equal analytical value.
Very small gaps frequently occur during normal market fluctuations and may simply represent insignificant price noise.
To reduce unnecessary chart clutter, this indicator offers two independent filtering methods.
### Percentage Filter
The minimum acceptable gap size can be defined as a percentage of the current market price.
Only Fair Value Gaps exceeding the specified percentage threshold are displayed.
This mode is useful for traders who prefer a fixed proportional filter across different assets.
---
### ATR Adaptive Filter
The second filtering method compares the gap size against the current Average True Range (ATR).
Instead of relying on a fixed gap width, every imbalance must exceed a configurable multiple of current market volatility.
Because ATR expands during volatile conditions and contracts during quieter markets, this approach automatically adapts the minimum acceptable Fair Value Gap size without requiring constant manual adjustment.
This helps maintain more consistent filtering across different symbols, sessions, and market environments.
---
# Fair Value Gap Strength Score
One of the primary enhancements introduced in this implementation is the Fair Value Gap Strength Score.
Rather than assuming all detected imbalances have equal significance, every Fair Value Gap is assigned a numerical score ranging from 0 to 100.
The score combines two independent measurements.
## 1. Gap Size Analysis
The script compares the width of the Fair Value Gap with the current ATR.
Larger displacement moves generally indicate stronger directional momentum and therefore contribute more heavily to the final score.
---
## 2. Relative Volume Analysis
The volume of the candle responsible for creating the Fair Value Gap is compared against its recent moving average.
Higher-than-average participation suggests stronger market commitment and increases the confidence score.
---
## Final Strength Score
The final Strength Score blends volatility expansion and relative participation into a single numerical value.
Higher scores generally represent Fair Value Gaps created by stronger market displacement accompanied by relatively stronger trading activity.
Users may also define a minimum acceptable Strength Score, allowing weaker Fair Value Gaps to be filtered automatically.
This provides an additional quality layer beyond simple price imbalance detection.
---
# Multi-Timeframe Fair Value Gap Detection
The indicator supports optional Higher Timeframe (HTF) analysis.
When enabled, the script independently evaluates completed candles from the selected higher timeframe using the same Fair Value Gap detection algorithm.
Detected higher-timeframe Fair Value Gaps are projected directly onto the active chart using a dedicated color scheme.
This enables traders to monitor institutional imbalance zones from larger market structures while executing analysis on lower timeframes.
The higher-timeframe feature removes the need to switch between multiple charts during analysis.
---
# Automatic Zone Management
Each detected Fair Value Gap becomes an independent price zone.
Once created, every zone is continuously monitored as new market data becomes available.
Users may choose between two operating modes.
### Persistent Mode
Fair Value Gaps remain visible regardless of future price action.
This mode is useful for historical analysis.
---
### Automatic Mitigation Mode
When enabled, the script continuously checks whether price has fully traded back into the imbalance.
Once a Fair Value Gap has been completely mitigated, its corresponding zone is automatically removed from the chart.
This helps reduce clutter while keeping attention focused on active market inefficiencies.
---
# Dynamic Zone Extension
Every active Fair Value Gap extends forward automatically.
As new candles appear, existing zones continue projecting into future price action until mitigation occurs or the configured extension period expires.
This allows traders to monitor future interactions between price and previously identified imbalance zones without manually updating chart objects.
---
# Visualization
The indicator includes multiple visualization options.
Users may display:
• Bullish Fair Value Gaps
• Bearish Fair Value Gaps
• Higher-Timeframe Fair Value Gaps
Zones may use either fixed bullish/bearish colors or rotate through a customizable color palette, making consecutive imbalance zones easier to distinguish during periods of increased market activity.
Strength Scores may also be displayed directly inside each Fair Value Gap box.
---
# Available Settings
The indicator includes configurable options for:
• Bullish Fair Value Gap visibility
• Bearish Fair Value Gap visibility
• Percentage-based minimum gap filtering
• ATR-based adaptive filtering
• ATR Length
• ATR Multiplier
• Strength Score display
• Minimum Strength Score threshold
• Volume Average Length
• Multi-Timeframe detection
• Higher-Timeframe selection
• Automatic mitigation removal
• Zone extension length
• Fixed colors
• Palette cycling
• Complete visual customization
---
# Suggested Workflow
One possible workflow is:
1. Determine the primary market trend using your preferred methodology.
2. Enable Higher-Timeframe Fair Value Gap detection if broader market context is required.
3. Wait for new Fair Value Gaps that satisfy the selected filtering criteria.
4. Evaluate the Strength Score.
5. Monitor future price interaction with active imbalance zones.
6. Combine Fair Value Gap analysis with your own confirmation techniques such as market structure, liquidity sweeps, order blocks, break of structure (BOS), change of character (CHoCH), volume analysis, or personal risk management rules before making trading decisions.
The indicator intentionally does not generate automated buy or sell signals.
Its purpose is to provide an objective framework for identifying and monitoring price imbalance zones.
---
# Original Design Philosophy
This implementation was developed to extend the traditional Fair Value Gap workflow beyond simple imbalance detection.
Instead of displaying every possible gap, the indicator integrates multiple analytical layers—including adaptive ATR-based filtering, quantitative Strength Scoring, configurable minimum quality thresholds, automatic mitigation management, dynamic zone extension, and optional multi-timeframe confluence—to help traders organize Fair Value Gaps according to both market volatility and relative participation.
The design philosophy focuses on improving clarity, reducing low-quality signals, and providing a flexible analytical framework suitable for different trading styles and market conditions.
---
## Disclaimer
This indicator is an analytical charting tool designed to assist technical analysis.
It does not predict future price movement, guarantee profitable trades, or provide financial or investment advice.
Trading decisions should always be based on independent analysis, proper risk management, and the trader's own methodology.
Indicador
Indicador
Gabriel Pennant Pattern Detector w/Breakout TargetFlagpole (teal line + label): sharp move ≥ min % detected directly before consolidation
Pennant: converging trendlines (falling red upper from 2 pivot highs, rising blue lower from 2 pivot lows), labeled, with compactness check vs flagpole
Bullish: "▲ BREAKOUT" above upper line; bearish mirror: "▼ BREAKDOWN" below lower line
Target: classic flagpole-height projection (or pennant height, selectable) — orange zone + price label + alert
Tunables: pole length/move %, pivot length, min/max pennant width, max depth %, zone width. Invalidates on wrong-side escape, apex without breakout, or age-out. Indicador
Order Flow Volume Delta, CVD, Absorption & Divergence [LunqFX]Price shows you WHERE the market went. Order flow shows you WHO pushed it there — buyers or sellers — and whether they had real volume behind the move. This Order Flow indicator reads the volume delta on every candle (the balance of buying volume vs selling volume), builds it into a cumulative volume delta (CVD) trend, and automatically marks the two order-flow events that lead price: absorption and delta divergence. Everything is drawn on your chart as clean delta candles, order-flow support/resistance levels and a live buying-pressure dashboard.
❶ THE CONCEPTS (so it's clear)
▸ VOLUME DELTA — the difference between buying volume and selling volume inside a bar. Positive delta = buyers were more aggressive, negative = sellers. It is the core of all order-flow analysis.
▸ CVD (CUMULATIVE VOLUME DELTA) — delta added up over time. A rising CVD means buyers are steadily accumulating; a falling CVD means distribution by sellers. CVD is how you see the real trend of order flow, not just price.
▸ ABSORPTION — a bar with heavy volume but almost no price movement. It means a large player (smart money / institutional) is absorbing every market order at that level. Absorption very often appears right before a reversal.
▸ DELTA DIVERGENCE — price makes a new high but CVD does not (or a new low but CVD does not). The move has no real volume behind it — a trap / exhaustion signal that warns a reversal is likely.
❷ WHAT YOU SEE ON THE CHART
▸ Delta candles — sky-blue when buyers won the bar, coral when sellers won; the brighter the candle, the more one-sided the flow. You read buying and selling pressure at a glance.
▸ Order-flow levels — every absorption (gold) and divergence (blue / coral) is projected to the right as a support/resistance level with its exact price. These are the levels where big volume actually traded, so price reacts to them again.
▸ Live dashboard — who is in control (buyers vs sellers) from the CVD, the CVD value, the current bar's buy/sell pressure split, and the latest signal.
❸ HOW TO TRADE IT — STEP BY STEP
1 — Read the BIAS. The panel shows ▲ BUYERS or ▼ SELLERS IN CONTROL from the CVD. Trade with the side that controls order flow, not against it.
2 — Watch for DELTA DIVERGENCE against the move. Price higher high while CVD makes a lower high = buyers are exhausted → look for shorts. Price lower low while CVD makes a higher low = sellers are exhausted → look for longs. This is the highest-value order-flow reversal signal.
3 — Use ABSORPTION as a reversal cue. When heavy volume fails to move price, the move is being absorbed; watch for the turn and use that gold level as your invalidation line.
4 — Trade the reaction at order-flow levels. Old absorption and divergence levels act as support and resistance — enter when the delta flips back in your favour as price returns to a level.
5 — Confirm with Bar pressure. The panel's ▲/▼ % buy shows the live buy/sell split — take the trade when it agrees with your setup and the bias.
❹ HOW IT WORKS (fully transparent)
Each bar's volume is split by where price closed in its range: buy-volume = volume × (close − low) ÷ range, sell-volume = volume × (high − close) ÷ range, and delta = buy − sell. This is a transparent, range-based volume-delta estimate — it needs no tick or bid/ask feed, so it runs on any symbol. CVD is the running sum of that delta (session-anchored on intraday charts, fully cumulative on daily and higher, handled automatically). Absorption is flagged when volume rises above its average by your chosen multiple while the candle body stays smaller than a fraction of ATR. Divergence compares each confirmed swing pivot in price with the CVD value at that pivot. Every reading comes from closed bars and confirmed pivots — no repainting, no lookahead.
Order flow is strongest on markets with true exchange volume — crypto, stocks, futures and indices — and on intraday timeframes (1m–4h), where buying and selling pressure is most meaningful. On forex, volume is broker tick-volume, so treat the delta as an approximation of order flow rather than exact.
SETTINGS — CVD reset (Session / Week / None), absorption sensitivity, divergence swing length, number of order-flow levels + glow, delta candles on/off, dashboard position.
ALERTS — bullish delta divergence, bearish delta divergence, absorption, and CVD crossing zero (buyers / sellers taking control).
This indicator is an educational market-analysis tool, not financial advice. The volume delta shown here is a transparent estimate from price and volume, not exchange-audited bid/ask order flow, and past behaviour does not guarantee future results. Always confirm with your own analysis and manage your risk.
Indicador
Luxara Live Plan - QTM MatchedLuxara Live Plan – QTM Matched
Luxara Live Plan – QTM Matched is a precision trade management indicator built to work alongside the Luxara Quick Trend Master (QTM) strategy. It helps traders visualize structured trade plans by identifying entry zones, stop-loss placement, and take-profit targets that align with the prevailing market trend.
Designed to remove emotion from trading, this script provides a disciplined framework for planning and executing trades while maintaining consistency and proper risk management.
Features
QTM trend-matched trade planning
Visual entry, stop-loss, and take-profit levels
Risk-to-reward trade structure
Buy and sell trade scenarios
Clear chart overlays for live market analysis
Multi-timeframe compatibility
Suitable for Forex, Gold, Indices, Crypto, Stocks, and Commodities
Best Practices
This indicator is intended to be used in conjunction with the Luxara Quick Trend Master. Traders should wait for trend confirmation before executing a trade and always manage position sizing according to their personal risk management plan.
Educational Purpose
The Luxara Live Plan is designed to teach traders how to create structured trade plans before entering the market. It promotes consistency, patience, and disciplined execution rather than emotional decision-making.
Disclaimer
This script is provided for educational and informational purposes only and does not constitute financial or investment advice. Trading financial markets involves substantial risk, and past performance does not guarantee future results. Users are solely responsible for their trading decisions and risk management.
Developed by Luxara Gold
Building disciplined traders through structure, precision, and consistency. Indicador
Gabriel Inverse Head & Shoulders Detector w/Breakout TargetInverse H&S (bullish): 3 pivot lows, head deepest; horizontal neckline at the higher interior peak; "▲ BREAKOUT" on close above neckline; target = neckline + head-to-neckline height (X), shown as orange zone + alert
Mirror — regular H&S (bearish): 3 pivot highs, head tallest; breakdown below neckline with downward-projected target
Labels: Shoulder 1, Head, Shoulder 2, Neckline; tunables for pivot length, shoulder tolerance %, min head depth %, pattern width, zone width; each direction toggleable
Invalidates if price escapes past the head or the pattern ages out. Indicador
Luxara Quick Trend Master V71 StableLuxara Quick Trend Master V71 Stable
Luxara Quick Trend Master V71 Stable is a professional trend-following indicator designed to help traders quickly identify market direction, trend strength, and high-probability trading opportunities with minimal chart clutter.
Built for consistency and speed, the indicator filters market noise and provides a clean view of the prevailing trend, allowing traders to stay aligned with momentum while avoiding unnecessary entries against the market.
Features
Fast trend identification
Dynamic trend filtering
Bullish and bearish trend visualization
Momentum confirmation
Clean, uncluttered chart display
Works across Forex, Gold, Indices, Crypto, Stocks, and Commodities
Compatible with multiple timeframes
Designed for scalping, day trading, and swing trading
Best Practices
For the best results, trade in the direction of the primary trend and combine this indicator with proper market structure analysis, support and resistance, and disciplined risk management. Avoid trading during major economic news releases unless your strategy specifically accounts for increased volatility.
Educational Purpose
This indicator is intended to help traders better understand trend behavior and improve decision-making through structured market analysis. It is a tool to support a trading plan—not a substitute for one.
Disclaimer
This script is provided for educational and informational purposes only and should not be considered financial or investment advice. Trading financial markets involves significant risk, and past performance does not guarantee future results. Users are solely responsible for their own trading decisions and risk management. Indicador
Indicador
Market Regime Engine [NQ Labs] WHAT THIS ANSWERS
Almost every indicator tells you WHAT the market is doing. Very few tell you
whether the current market has enough exploitable structure to be worth
risking money on at all. The Market Regime Engine is built for that second
question: should I be trading this right now, and if so, what style of
approach do current conditions actually favour?
It is not a signal generator. It produces no entries. It is a filter you run
underneath whatever you already trade.
WHY IT IS BUILT THIS WAY
Two design decisions separate this from a conventional regime or trend filter.
1. EVERY AXIS IS PERCENTILE-RANKED AGAINST ITS OWN HISTORY.
Most regime tools use fixed thresholds - an ADX of 25, an ATR multiplier of 3.
Those numbers are calibrated to whatever the author tested on. They are the
reason a tool behaves sensibly on one instrument and nonsensically on the
next. Here, each axis is ranked against its own recent distribution on the
current symbol and timeframe, so a 65th-percentile reading carries the same
meaning on a crypto pair as it does on an FX major. Nothing needs retuning
per market.
2. THE THREE AXES ARE ORTHOGONAL BY DESIGN.
Many "confluence" tools stack three views of momentum and present the
agreement as confirmation. Correlated inputs agreeing is not evidence. These
three measure genuinely different properties:
DIRECTIONAL EFFICIENCY - net distance travelled divided by the total path
walked to get there. A value near 1 is a straight line. A value near 0 means
price ended where it started after a great deal of work. This is the most
direct available answer to "is there a trend here", and it is independent of
direction.
VOLATILITY STATE - ATR ranked against its own history. Not "is volatility
high" in absolute terms, but "is volatility high for this instrument".
RETURN PERSISTENCE - lag-1 autocorrelation of log returns. Positive means an
up bar tends to be followed by an up bar, so momentum approaches have
something to work with. Negative means the market reverts. Near zero means
returns carry no usable memory.
THE SCORING LOGIC
The Tradeability Score (0-100) rests on one idea:
Efficiency is the signal. Volatility is the cost of being wrong.
Volatility only hurts you when there is no direction to exploit.
So the noise penalty is the product of how little direction exists and how
violent the market is. It approaches zero inside a strong trend no matter how
wild conditions get - because volatility inside a trend is opportunity, not
noise - and it peaks precisely where traders are most reliably ground down:
low efficiency combined with high volatility. That specific combination is
what the engine exists to flag.
THE FIVE REGIMES
TREND Efficiency high. Directional. Follow it.
VOLATILE CHOP Efficiency low, volatility high. No direction, maximum cost
of being wrong. The state that does the damage.
COIL Efficiency low, volatility low. Compression. Wait.
RANGE Efficiency low, volatility middling. Edges are tradeable.
TRANSITION Efficiency mid-range. No clean read. Reduce size.
A raw regime read must hold for a configurable number of consecutive bars
before it is confirmed. Without that filter, readings that straddle a
threshold flip back and forth for single bars.
REGIME MATURITY - THE PART I HAVE NOT SEEN ELSEWHERE
The engine records the length of every completed regime run on the current
chart and reports the current run against that learned baseline, together with
the sample size behind it.
A trend at 0.3x its typical duration and a trend at 2.4x are not the same
trade, even though every conventional indicator prints the identical reading
for both. A compression that has lasted three times longer than compressions
normally last on this instrument is a different proposition to one that
started six bars ago.
The sample size (n=) is shown deliberately. Below the configured threshold the
cell dims, because a baseline built from two observations is not evidence and
should not be dressed up as though it were.
HOW TO USE IT
The engine is a gate, not a trigger. The intended workflow:
1. Read the Verdict first. STAND DOWN means your edge, whatever it is, is
probably not present. The most valuable output of this tool is the trades
it talks you out of.
2. Read the Regime and Favoured Style. Trend-following systems belong in
TREND. Mean-reversion belongs in RANGE, and only when Persistence confirms
the market is actually reverting rather than merely quiet. COIL means the
setup has not arrived yet. VOLATILE CHOP means nothing you own works here.
3. Read Persistence before choosing an approach. If it reads Random, the
market has no memory to exploit in either direction, and both momentum and
mean-reversion are coin flips.
4. Use vs Typical for position management, not entry. An extended regime is
not a reversal signal. It is a reason to stop adding and to tighten what
you already hold.
5. Let the ribbon and score do the work on the price chart. The dashboard can
be forced onto the main pane so the engine occupies a pane without costing
you chart real estate.
SETTINGS THAT ACTUALLY MATTER
RANKING LOOKBACK is the important one. It must span several complete regime
cycles on your timeframe or every axis will rank near the middle and
everything will read TRANSITION. 250 bars on a daily chart is roughly a year -
a real baseline. 250 bars on a 5-minute chart is under a day, and is not.
On intraday timeframes, raise it substantially.
MINIMUM REGIME RUN trades responsiveness for stability. Higher values give a
calmer read and a cleaner duration baseline at the cost of confirming changes
later. Set it to 1 to see the unfiltered classification.
CHOP PENALTY controls how hard low-efficiency volatility is punished. Set it
to 0 and the score becomes pure efficiency rank.
EFFICIENCY and VOLATILITY thresholds are percentiles, not raw values. They do
not need adjusting per instrument. That is the point.
LIMITATIONS - STATED PLAINLY
- This is a lagging, descriptive tool. It classifies conditions that have
already formed. It does not forecast, and it cannot tell you a regime is
about to end.
- Confirmation costs lag. A genuine regime change registers a few bars late by
design. That is the price of not flickering.
- The maturity baseline is learned from visible chart history and rebuilds
whenever settings, symbol, or timeframe change. It is not persistent memory.
Early in a chart, or for a rarely-occurring regime, the sample is thin. The
n= value tells you when to discount it.
- On intraday equity charts, overnight gaps inflate ATR and distort the
persistence reading. Daily and above, or extended hours, handle this better.
- Autocorrelation is a weak statistic on short samples. Persistence readings
close to zero should be read as "no information", not as a subtle signal.
- Efficiency is directionless. TREND tells you a trend exists, not which way
it points. Pair it with something that reads direction.
- No regime classification is correct at the moment it matters most, which is
the turn. Nothing here changes that.
This script is open-source. Read the code, disagree with it, improve it.
This is an analytical tool for studying market conditions. It is not financial
advice, and it does not generate trade recommendations. Trading involves risk
of loss. Indicador
