Liquidity Sweep & Golden Zone [StrixEDGE]Overview
Liquidity Sweep & Golden Zone is a multi-timeframe structural analysis tool built for traders who use Smart Money Concepts (SMC) and ICT methodology. It identifies liquidity sweeps at confirmed swing levels, maps the Fibonacci Golden Zone (OTE), and presents a real-time confluence dashboard across 15-minute, 1-hour, 4-hour, and daily timeframes.
The indicator answers three questions at a glance: where is the liquidity?, has it been swept?, and do multiple timeframes agree on direction?
How It Works
Liquidity Sweep Detection
The engine tracks confirmed swing highs and swing lows using pivot detection. These pivots represent resting liquidity pools — areas where stop-loss orders accumulate:
- Buy-Side Liquidity (BSL) sits above swing highs, where short sellers place their stops. When price wicks above a swing high and closes back below, a BSL sweep is triggered — signaling that buy-side stops were hunted. This typically precedes bearish continuation.
- Sell-Side Liquidity (SSL) sits below swing lows, where long traders place their stops. When price wicks below a swing low and closes back above, an SSL sweep is triggered — signaling that sell-side stops were hunted. This typically precedes bullish reversal.
Each sweep event displays the estimated volume in USDT at the moment of the sweep. This is calculated as `volume × close` on the sweep bar and serves as a proxy for the magnitude of liquidations that occurred. Higher volume sweeps tend to produce stronger reversals.
After a sweep, the level is updated to the new extreme — preventing duplicate signals and establishing a fresh liquidity reference.
Support & Resistance (Pivot-Based)
Active (un-swept) pivot levels are drawn on the chart as structural Support and Resistance:
- A line extending from the bar where the pivot formed to the current price area
- A zone band (ATR × 0.15) around the level, representing the area of influence
- Origin labels showing "Buy-Side Liquidity SWEEP" or "Sell-Side Liquidity SWEEP" with the USDT volume
- Price labels on the right edge for quick reference
These levels update dynamically: when a new pivot is confirmed, the line starts from the new origin. When a sweep occurs, the level shifts to the sweep bar.
Golden Zone (Fibonacci OTE: 0.618 – 0.786)
The Golden Zone represents the Optimal Trade Entry area — the 61.8% to 78.6% Fibonacci retracement of the most recent price range. Unlike pivot-based calculations, this indicator uses a **lookback-based approach**: it finds the highest high and lowest low over a configurable number of bars, then derives the zone from that range.
The zone is visualized with:
- A filled box between the 0.618 and 0.786 levels (transparency adjustable)
- Dashed border lines at 0.618 and 0.786
- A dotted midline at the 0.702 level
- Price labels showing exact values
- A centered "GOLDEN ZONE" tag
This approach produces a stable, always-visible zone that doesn't depend on individual pivot detection, making it reliable across all market conditions.
Multi-Timeframe Heatmap
The core of this indicator is a 7-column heatmap table that evaluates market conditions across four timeframes simultaneously:
| Column | What It Shows | Bullish | Bearish |
|--------|--------------|---------|---------|
| SWEEP | Recent liquidity sweep direction | ● BULL (SSL swept) | ● BEAR (BSL swept) |
| GZ | Price position relative to Golden Zone | ▲ ABOVE | ▼ BELOW |
| S/R | Price position vs. pivot S/R midpoint | ▲ BULLISH | ▼ BEARISH |
| BIAS | EMA 21/50 trend direction | ▲ BULL | ▼ BEAR |
| RSI | RSI(14) value with decimal precision | Color-coded by zone | Color-coded by zone |
| SIGNAL | Composite of all conditions | LONG ▲ | SHORT ▼ |
Signal Logic: The SIGNAL column counts four conditions per timeframe — RSI above/below 50, price in/above the Golden Zone, price above/below the S/R midpoint, and EMA bias direction. When 3 or more conditions align bullish, the signal reads LONG. When 3 or more align bearish, it reads SHORT. Otherwise, NEUTRAL.
A confluence bar at the bottom aggregates all timeframes. When the majority of conditions across all four timeframes agree, it displays STRONG BULLISH or STRONG BEARISH CONFLUENCE.
RSI Color Coding
| RSI Range | Color | Meaning |
|-----------|-------|---------|
| > 70 | Orange | Overbought |
| 50 – 70 | Green | Bullish momentum |
| 30 – 50 | Red | Bearish momentum |
| < 30 | Blue | Oversold |
Settings
Structure Settings
| Setting | Default | Description |
|---------|---------|-------------|
| Pivot Lookback Length | 5 | Bars left and right to confirm a swing pivot. Higher values produce fewer but stronger levels |
| Sweep Active Memory | 10 | How many bars a sweep signal remains active on the heatmap after detection |
Golden Zone
| Setting | Default | Description |
|---------|---------|-------------|
| Lookback Period | 20 | Number of bars to find highest high and lowest low for Fibonacci calculation |
| Show Golden Zone | On | Toggle zone visibility on chart |
| Fill Golden Zone | On | Shade the area between 0.618 and 0.786 |
| Fill Transparency | 88 | Opacity of the filled zone (50–98) |
| Golden Zone Color | Gold | Color for all Golden Zone elements |
Support & Resistance
| Setting | Default | Description |
|---------|---------|-------------|
| Show S/R on Chart | On | Toggle S/R lines, zone bands, and labels |
| Support Color | Teal | Color for support level and SSL elements |
| Resistance Color | Red | Color for resistance level and BSL elements |
| Line Width | 2 | Thickness of S/R lines (1–4) |
| Line Style | Solid | Solid, Dashed, or Dotted |
| Show Price Labels | On | Display price values at the right edge of each level |
Sweep Event Labels
| Setting | Default | Description |
|---------|---------|-------------|
| Show Sweep Labels | On | Toggle sweep event markers on chart |
| Bullish Sweep Color | Green | Color for SSL sweep labels (bullish reversal) |
| Bearish Sweep Color | Red | Color for BSL sweep labels (bearish reversal) |
Heatmap Table
| Setting | Default | Description |
|---------|---------|-------------|
| Show Heatmap Table | On | Toggle the entire dashboard |
| Table Position | Top Right | 9 position options across the chart |
| Table Cell Size | Normal | Tiny, Small, Normal, Large, or Auto |
Alerts
Five alert conditions are built in and ready to use:
1. Bullish Liquidity Sweep — SSL swept, potential bullish reversal
2. Bearish Liquidity Sweep — BSL swept, potential bearish reversal
3. Bull Sweep + Golden Zone — SSL swept while price is inside the OTE zone (high-probability long)
4. Bear Sweep + Golden Zone — BSL swept while price is inside the OTE zone (high-probability short)
5. Price in Golden Zone — Price enters the 0.618–0.786 zone on any bar
Disclaimer
This indicator is a technical analysis tool designed to assist in identifying potential areas of interest based on market structure and liquidity concepts. It does not constitute financial advice. The USDT volume figures are approximations, not verified liquidation data. Always use proper risk management and combine this tool with your own analysis. Past performance of any signal or pattern does not guarantee future results. Trade at your own risk. Indicador
Market Dictionary [GBB]Can price be translated into a language?
I wondered if it could. So I built a dictionary for the market. This
indicator is that dictionary — including everything it does NOT say.
How it reads the chart: Every bar, the recent closes are reduced to
their shape and spelled as a short word — a few letters describing where
price sat along the way, from a (lowest zone) up to the top of the
alphabet (highest zone). A sharp drop that goes quiet spells "ddaa". With
short words and a small alphabet, the market has a finite vocabulary:
256 words in the standard config, 6,561 in the long one. Every bar on
your chart is speaking exactly one of them.
The readout:
The current word translated into plain English:
"THE MARKET JUST SAID: sharp drop, now quiet at the lows" — plus how
many times this exact word has been seen on your chart and how rare
that is. A description of shape, not a signal.
The regime wash. The background tinted by the word's temperature —
toward red when the word lives in the low zones, toward green in the
high zones, stronger when the shape is more extreme.
The letter ribbon. A letter-colored track under price showing the
letter each bar is writing right now. Calm markets babble; you will see
the tone shift.
The Lexicon Panel
The full dictionary entry: seen-count, rarity
percentile, and causal win rate / average forward return over the next
1, 4 and 16 bars, computed on your chart's history with nothing peeking
into the future — each line carrying its validation verdict. Faint
numbers mean thin data, on purpose: your eyes should trust a statistic
exactly as much as the sample deserves.
Events. When the chart prints a word it has NEVER printed before,
you get a violet flare: "NEVER SEEN BEFORE". And on exactly two
market/timeframe combinations, a gold marker when a study-validated
word completes (more on both below — read the caveats).
Most words mean nothing
"no significant edge" is its most common verdict, by design.
Rare words looked like they preceded volatility in-sample on 5 of 7
markets. Out of sample: 0 of 28 configurations passed. The
"NEVER SEEN BEFORE" flare is a curiosity flag, and its own tooltip
tells you rarity's predictive power is not confirmed.
The vocabulary itself is remarkably stable: in 25 of 28 configurations
the word frequencies stayed the same from the research years into the
held-out years. Markets from 2008 and 2025 speak the same language.
It just mostly is not saying anything predictive.
Two words survived everything: "ddaa" on gold H1 (564 out-of-sample
occurrences; remained net-positive after median spread cost in the
study — informational, not a recommendation) and one BTC 1h pattern
that passed at 69% degradation against a 70% cutoff with 38 samples —
the panel labels that one "marginal" because that is what it is.
The surviving edges are breakpoint-fragile: they appear under the
empirically fitted letter boundaries, not under textbook Gaussian ones.
I tell you this because it is a real limitation.
What this tool is
A translator, not a signal. It tells you what the
current shape is called, how common it is, and what the record shows,
with the verdict attached to every number. Whether any of that adds
something to YOUR strategy is your test to run — that is not a
disclaimer, it is the design.
Frozen parameters
The letter boundaries, variance gates, and rarity
thresholds are hardcoded from the validation study (2026-07) and cannot
be edited or refit — there is deliberately no adaptive mode, because
refitting live would detach the display from its validation. Crypto
combos were validated on Binance USDT-M perpetual data; the indicator
accepts the same symbol on other venues since perp prices track closely
across exchanges — the panel tooltip names the exact validated
instrument. The panel's live statistics (seen-counts, win rates,
averages) are built from your chart's visible history; the validation
verdicts are not — they are the study's hardcoded results. On markets
outside the study, the indicator runs in EXPLORER MODE: fully functional,
clearly labeled, and it will never show you a validation star it did not
earn.
No Repainting:
Words finalize on bar close; statistics
update only when their forward horizons complete; nothing is drawn on
unconfirmed bars. Don't take my word for it: open bar replay, step
through a session, and try to catch a value changing after its bar
closes.
Indicador
Indicador
Mini SMC Screener I EonMetrics Mini SMC Screener
Mini SMC Screener watches up to 5 symbols at once and answers a question no single-chart indicator can: WHERE is something happening right now. Instead of flipping through charts, you read one small table: market structure direction and the freshest Fair Value Gap event for every symbol on your list.
HOW IT WORKS
The script scans each symbol on the timeframe you choose (empty = chart timeframe) and reports two independent readings per symbol.
🔵Structure — a strict MSS/BOS engine. Swing points are confirmed pivots (a candle with N higher/lower candles on both sides). A close above the last confirmed swing high in a downtrend is a Market Structure Shift to bullish; a close below the protected swing low in an uptrend shifts structure bearish. Between shifts, breaks of structure in trend direction keep updating the protected level. The column shows the current state: ▲ Bull or ▼ Bear.
🔵FVG — a three-candle imbalance tracker. A Fair Value Gap forms when the first and third candle of a three-candle sequence do not overlap (the low of the newest candle stays above the high of the candle two bars back, or the mirror for bearish). The gap between them is unfilled territory. The engine registers a gap only when its height clears an ATR-based minimum size, keeps it active until price trades through its far edge (a full fill), and reports the freshest of two events:
- New — a qualifying gap just formed (displacement is happening now)
- Retest — price traded back INTO a still-open gap (the return many traders wait for)
Each event ages out of the table after a configurable number of bars, so the column only ever shows fresh information — an FVG event from 200 bars ago is not a setup and is not displayed.
Why the two are combined in one script: they answer the two halves of the same scanning question. Structure tells you the directional context of a symbol; the FVG event tells you that something tradeable is happening there right now. One without the other is either context with no trigger, or a trigger with no context — a scanner needs both on one row to be useful.
KEY FEATURES
- 5 symbol slots, each with its own on/off toggle — defaults cover crypto, forex, gold and an index; replace them with your own watchlist
- Structure column: live Bullish / Bearish read from confirmed swing pivots (non-repainting state machine — the state changes only on a confirmed close through a level)
- FVG column: New / Retest events with age in bars ("now", "3b", …); the cell background lights up when the event happened on the current bar
- ATR size filter — noise-sized gaps never make it into the table
- Freshness windows for FVG events, so stale signals disappear on their own
- Alerts: per-symbol alert() messages (structure flips, new FVG, FVG retest) plus two named conditions — "Structure flip (any symbol)" and "FVG event (any symbol)"
- Scan timeframe input — scan a higher timeframe than your chart; a warning shows if you accidentally scan below the chart timeframe (unreliable by design on TradingView)
- Table position and text size inputs
HOW TO USE
1. Add the indicator to any chart and open Settings → Symbols. Replace the default tickers with the instruments you actually follow.
2. Pick a Scan Timeframe — the chart timeframe or higher. A common setup: chart on M15, scan on M15 or H1.
3. Read rows left to right: Structure gives you the direction bias, FVG tells you whether a fresh imbalance or a retest is in play on that symbol.
4. The combination many traders look for: structure and a fresh FVG event pointing the SAME way — e.g. ▲ Bull structure plus a bullish FVG retest.
5. Set an alert with "Any alert() function call" to get the detailed per-symbol messages without watching the table.
SETTINGS
- Scan: scan timeframe
- Symbols: 5 slots with toggles
- Structure: pivot strength (candles each side to confirm a swing)
- Fair Value Gaps: minimum gap size (× ATR), event freshness (bars)
- Alerts: master toggle
- Table: position, text size, bullish/bearish colors
A note on how the scan works under the hood: each symbol is evaluated in its own sandboxed context via request.security — the full engine state (structure machine, active gap list) is kept separately per symbol, and signals commit on bar close. Disabled slots still consume their data request (a TradingView compile-time requirement); the toggle hides the row.
This tool reports structure state and imbalance events. It does not generate buy/sell signals, targets or stop levels — what you do with a reading is your decision. It is not financial advice; always do your own analysis and manage your own risk.
Part of the EonMetrics toolset.
Indicador
Liq Sweep + CHoCH + OB InstantLIQ SWEEP + CHoCH + OB INSTANT
This script is a three-stage liquidity-trap detector that resolves a full smart-money sequence into a single confirmed entry, with no retest wait. It is not a collection of separate SMC tools stacked on one chart. It is one state machine in which each stage must validate before the next can arm, and only the completed sequence produces a signal.
WHY THE SEQUENCE MATTERS
Most liquidity-based scripts fire on a single event: a sweep, or a change of character, or an order-block tap. Each of those in isolation is noisy. Sweeps occur constantly without follow-through. CHoCH prints in chop with no displacement behind it. Order blocks form everywhere.
The idea here is that none of those events is treated as a signal on its own. They are treated as preconditions that must occur in order, within a defined window, all supporting the same directional thesis. The script formalizes the trap as a sequence and refuses to act until that sequence completes. A sweep with no CHoCH is discarded. A CHoCH with no identifiable order block produces nothing. Only the full chain fires.
HOW THE COMPONENTS INTEGRATE
STAGE 1 — LIQUIDITY SWEEP
Pivot-based swing highs and lows are tracked in rolling arrays. A sweep registers only when price wicks through a tracked level and closes back inside it, marking that resting liquidity above a high or below a low has been taken rather than genuinely broken. Each sweep opens a candidate setup and records the opposite-side structure level that will be watched next.
STAGE 2 — CHANGE OF CHARACTER
A candidate is promoted only if price then closes through that opposite structure level within a user-set lookback window. This is the directional confirmation: after buy-side liquidity is swept, a close below the prior swing low confirms reversal intent, and the mirror applies for the bullish case. Candidates that never produce a CHoCH inside the window expire and are discarded, so a stale sweep from fifty bars ago cannot fire later.
STAGE 3 — ORDER BLOCK AS ENTRY
On a confirmed CHoCH, the script scans back for the last opposing candle before the displacement move and marks that zone as the order block, along with its 50 percent midline. Because the sweep and the CHoCH have already validated the setup, order-block identification is treated as the entry trigger itself rather than waiting for a retest that may never come. The stop is placed beyond the swept level, since that level is what the setup is predicated on. The target is derived either from a configurable risk-to-reward multiple of the stop distance, or from an optional fixed-percentage mode.
The three stages are not independent indicators sharing a chart. Stage 2 cannot exist without Stage 1's swept level. Stage 3's scan window is anchored to Stage 2's displacement bar. The stop is defined by Stage 1's level. Removing any stage collapses the logic entirely, which is why they are integrated into one state machine rather than published as separate tools.
WHAT YOU SEE
Confirmed setups draw the swept-liquidity line, the accumulation zone spanning sweep to CHoCH, the highlighted CHoCH candle, and the order-block zone with its midline. Entries print a labeled trade box showing entry, stop, target and risk-to-reward. Exits are marked with the realized result as take-profit, stop, or time-based close. A status dashboard summarizes current stage, direction, swept level, active order block, setup counts, exit mode, position state, and trade management values.
SETTINGS
Structure — swing lookback for pivot detection, wick-sweep requirement, CHoCH lookback window.
Order Block — scan depth, minimum rejection-wick ratio, midline toggle, maximum zone age.
Trade Management — risk-to-reward ratio, stop buffer beyond the swept level, maximum bars in trade, cooldown between signals, RSI filter bounds, label toggles.
Exit Management — optional percentage-based take-profit and stop mode. Default behavior uses the risk-to-reward derived from the swept level.
Visuals — zone colors, ghost candles, dashboard, per-stage step labels.
HOW TO USE
Apply to a clean chart. Watch the dashboard stage indicator move from scanning, to sweep, to CHoCH as a setup builds. A trade box prints when the order block is identified on a confirmed bar. Tune the swing lookback and order-block scan depth to your instrument and timeframe. The tooltips include suggested starting ranges for futures and crypto. The risk-to-reward ratio controls target distance measured off the swept-level stop.
REFERENCE SETTINGS
The defaults are deliberately neutral. As a concrete starting point, these are the values I run on MNQ:
Swing Lookback 6
CHoCH Lookback 10
OB Scan Bars 50
Enable % Exit Mode: on
TP 0.25%
SL 1.0%
Max Bars in Trade 55
Cooldown Bars 3
These are a starting point for one instrument, not an optimized or recommended configuration, and they are not intended to suggest any particular outcome. Different instruments, timeframes and volatility conditions will call for different values. Treat them as a place to begin your own testing rather than a setting to adopt as-is.
NON-REPAINTING
All structure, sweep, CHoCH and order-block evaluations run on confirmed bar closes. Pivot detection uses right-side confirmation. Signals do not repaint once a bar has closed. Take-profit and stop levels are evaluated intrabar for realistic exit marking, while the entry itself is fixed on the confirmed bar that completes the sequence.
DISCLAIMER
For educational and informational purposes only. This is not financial advice, and nothing here is a guarantee of future results. Markets are uncertain and past behavior does not predict future behavior. Always do your own analysis and use proper risk management.
Indicador
Indicador
Indicador
Indicador
ES & NQ Daily Levels -- Paste-In Support/Resistance MapperThis Daily Levels script is a manual, paste-in mapping tool. Paste a list of price levels into the settings and it draws them on your chart as clean lines and shaded zones with labels. It does not calculate signals or repaint — it simply renders the levels you enter.
Works on any symbol — ES, NQ, SPY, SPX, stocks, futures, forex, and crypto. Just paste levels that match that instrument's price.
Leave the box blank and it shows a few sample reference levels around current price (clearly tagged "sample", 10 points apart by default) so you can see how it works on any chart. The samples auto-hide the moment you paste your own levels. (The 10-point default spacing suits ES/NQ; for other instruments set the spacing to fit, or set it to 0 for auto.)
WHAT IT DRAWS
• Single prices → horizontal lines with labels
• Ranges (e.g. 5200-5205) → shaded zones
• Section groups you can label: Resistances, Supports, and special groups (Backtest, Add, Breakdown, Short)
• Tag any level "(major)" and it renders thicker
DYNAMIC S/R FLIP (optional)
When enabled, each level you paste under Supports/Resistances is colored by where price is right now:
• Price above the level → acts as support (green, "S")
• Price below the level → acts as resistance (red, "R")
• Price inside a zone → neutral / in-play (yellow)
Turn it off to keep the exact section labels you pasted.
HOW TO USE
1. Add the indicator to your chart.
2. Open its settings → "PASTE YOUR DAILY LEVELS HERE".
3. Paste your levels, one section per line, for example:
Resistances: 5210, 5218 (major), 5225-5228
Supports: 5188, 5175 (major)
4. Lines, zones, and labels draw automatically. Colors, widths, spacing, and label styling are all configurable.
NOTE
The sample levels are auto-generated placeholders for demonstration only — they are not recommended levels and should not be used for trading. This tool does not generate, suggest, or predict levels; it only displays the ones you enter.
For educational purposes only. This is not financial advice. Indicador
ICT Atlas - Execution ToolkitICT Atlas — Liquidity Execution Toolkit
Use best with #ICTPulse
ICT Atlas is an execution-focused visual toolkit for discretionary ICT-style futures traders. It is designed to organize session liquidity, timed intraday windows, SMT divergence, liquidity sweeps, and post-sweep market structure confirmation in one workflow.
This script is not an automated trading system and does not issue buy or sell signals. Its purpose is to help traders visually follow a sequence of conditions often used in manual execution:
1. Identify session liquidity.
2. Observe whether liquidity is swept.
3. Check for SMT divergence.
4. Wait for market structure confirmation after the sweep.
5. Use the trader’s own entry and risk model.
How it works
The script tracks Asia, London, and New York sessions using the selected timezone. At the end of each session, it records the session high and low, then extends those levels to the right side of the chart. These levels are labeled as AH/AL, LH/LL, and NYH/NYL.
Liquidity sweep detection is based on price interacting with those stored session levels. The user can choose between a simple wick-touch condition or a stricter wick-and-close-back condition. This allows the trader to decide whether a sweep should mean only that price traded through a level, or that price traded through the level and then rejected back inside it.
The SMT module compares the active chart symbol with a user-selected comparison symbol. It uses pivot highs and pivot lows to detect divergence between the two markets. A bearish SMT condition appears when one market makes a higher high while the comparison market does not confirm. A bullish SMT condition appears when one market makes a lower low while the comparison market does not confirm.
The MSS/BOS confirmation module only becomes relevant after a liquidity sweep. After a valid high-side or low-side sweep, the script waits for price to break a recent swing level within the configured expiry window. This is intended to separate simple liquidity touches from situations where structure later confirms a possible shift.
The micro-box module highlights recurring intraday timing windows from :50 to :10 using the selected timezone. During each micro window, the script tracks the high, low, and midpoint of that window, allowing traders to study reactions around specific time-based execution windows.
Main features
* Asia, London, and New York session tracking
* Previous session high and low levels
* AH/AL, LH/LL, and NYH/NYL labels
* Liquidity sweep labels
* Wick-touch or wick-and-close-back sweep modes
* SMT divergence using a comparison symbol
* Post-sweep MSS/BOS confirmation
* ICT-style micro timing boxes from :50 to :10
* Optional alerts for sweeps and structure confirmation
* Adjustable colors, line widths, lookbacks, and object limits
How to use it
ICT Atlas is best used on lower timeframes such as 1-minute, 3-minute, and 5-minute charts.
Suggested workflow:
1. Mark the latest session highs and lows.
2. Watch for a sweep of Asia, London, or New York liquidity.
3. Check whether SMT divergence is present between the chart symbol and the comparison symbol.
4. Wait for MSS/BOS confirmation after the sweep.
5. Apply your own entry model, invalidation, and risk management.
This script is intended for educational and analytical use only. It does not provide financial advice, trade recommendations, or guaranteed outcomes. Futures and financial market trading involves risk.
Indicador
Indicador
Ryno V4 - 24HR High AccuracyRyno V4 – 24HR High Accuracy is a pullback-confirmation indicator designed for MNQ futures on the 15-minute chart.
Unlike breakout systems that may alert after price is already extended, Ryno V4 waits for an established trend, a controlled pullback, and confirmed momentum before producing an entry signal.
Core features:
• 24-hour market scanning
• Long and short signals
• 15-minute trend structure
• 60-minute trend confirmation
• EMA 9, 21, and 50 alignment
• VWAP direction filter
• RSI, volume, and volatility confirmation
• Pullback-first entry logic
• Maximum-extension protection
• Structural stops with ATR limits
• Trim and runner targets
• WATCH, ENTER, CANCELLED, STOPPED, and TARGET alerts
• Signals confirmed at candle close to reduce repainting
Alert meanings:
WATCH — A potential setup has formed. Wait for confirmation.
ENTER BUY/SELL — The pullback and momentum requirements have been confirmed.
CANCELLED — The setup became invalid before entry.
STOPPED — The tracked stop level was reached.
RUNNER TARGET — The tracked runner target was reached.
Designed primarily for scalp-to-short-runner trades. This indicator does not place or manage brokerage orders. Users remain responsible for execution, position sizing, risk management, and verifying signals through paper trading before risking capital.
No indicator can guarantee future results. Historical or simulated performance does not ensure live profitability.
Indicador
PTHLC Previous Timeframe High, Low, and ClosePTHLC — Previous Timeframe High, Low, and Close
PTHLC is a multi-timeframe market-structure indicator that displays the previous completed candle’s high, low, and close from a user-selected timeframe.
Unlike standard previous-day indicators, PTHLC can be applied to intraday or higher timeframes, making it useful for tracking levels from the previous 15-minute, 1-hour, 4-hour, daily, or other selected candle.
Major Features
Previous Timeframe Levels
The indicator plots:
PTH — Previous Timeframe High
PTL — Previous Timeframe Low
PTC — Previous Timeframe Close
The levels are based on the previous fully completed candle to provide stable, non-repainting reference points.
Automatic Timeframe Adjustment
When the selected reference timeframe is lower than the chart timeframe, the indicator automatically uses the chart timeframe instead of producing an error.
This allows the script to remain active as traders move between chart timeframes.
Confirmed Breach Detection
PTH and PTL are considered breached only after price closes beyond the level.
A close above PTH confirms a high breach.
A close below PTL confirms a low breach.
Breached levels are visually distinguished from active levels.
Bullish and Bearish Retest Logic
After a confirmed breach, PTHLC tracks the first return to the level.
A retest that closes above the level is classified as Retest Bullish.
A retest that closes below the level is classified as Retest Bearish.
The line, label, and table status update to reflect the retest direction.
Directional Previous Close
PTC provides immediate directional context:
Bullish when price is above PTC
Bearish when price is below PTC
Neutral when price is at PTC
PTC logic remains separate from the breach and retest logic used for PTH and PTL.
What Makes PTHLC Unique
Most previous-level indicators only plot static support and resistance lines.
PTHLC adds a complete level-state framework:
Active → Breached → Bullish or Bearish Retest
This helps traders quickly identify whether a previous timeframe level is untouched, broken, successfully held, or rejected after a retest.
PTHLC is designed for traders who use multi-timeframe structure, liquidity levels, breakout confirmation, support-and-resistance flips, and retest-based directional bias.
This indicator is intended as a market-analysis tool and does not provide guaranteed trade signals. Indicador
Quant Confluence Engine [JOAT]Quant Confluence Engine
Scores several independent market factors into one weighted composite, so signals fire on agreement across dimensions rather than on any single trigger.
What it is
Single-factor signals are fragile: a momentum cross, a moving-average flip or a volume spike each fails often on its own. This engine measures several independent factors, normalises them to a common scale, and blends them into one bipolar confluence score. A signal is produced only when enough factors line up, and the transparency of the score lets you see exactly why. It is an original scoring framework, not a bundle of overlaid classic indicators.
How it works
• The factors — the engine evaluates a set of complementary dimensions, each capturing a different aspect of the tape: trend alignment, momentum, volatility regime, volume behaviour, price structure and stretch relative to a mean. Each factor is computed with a standard, well-understood method and then scaled so it contributes fairly.
• Normalisation — every factor is converted to a bounded contribution, so no single input can dominate the composite purely because of its raw magnitude.
• Composite score — the contributions are combined into one signed 0-centred score. Positive means the factors lean bullish, negative bearish, and the magnitude expresses how strong the agreement is.
• State-machine signals — a Buy fires when the score crosses into sufficient bullish agreement from a non-bullish state; a Sell is the mirror. Because a signal requires a genuine state change, the engine will not re-fire the same direction bar after bar — signals are self-spacing by construction.
Trade levels
Each signal draws a red risk box to the ATR stop and a green reward box to the third target, with inner dividers and right-edge labels for entry, stop and each take-profit at your R multiples.
The dashboard
An adjustable factor-grid panel shows each factor's current lean (up or down) alongside a bipolar composite-score headline, the active signal, a conviction reading, and a live first-target-before-stop tally from closed bars only. The grid makes it obvious which factors are driving or vetoing a setup.
How to use it
• Works on any asset and timeframe; the factors adapt to the data.
• Read the grid before acting — a signal backed by broad agreement differs from one carried by a single strong factor.
• Raise the agreement requirement for fewer, higher-conviction signals, or lower it for more frequent ones.
Settings
Per-factor lengths and weights, the agreement threshold, ATR risk multiple and target R multiples, plus visual and dashboard controls.
Originality and usefulness
The value is the framework itself: a normalised, weighted multi-factor score with a transparent per-factor readout and a state-machine trigger that prevents signal spam. It is designed so a trader can inspect the reasoning, not just accept a label — which is precisely what a confluence approach should offer.
Notes and limitations
• Confluence reduces some false signals but does not remove them; correlated factors can all be wrong together in unusual conditions.
• Weighting is a design choice — different weights suit different markets, so treat the defaults as a starting point.
• The tally reflects only past bars on the current chart and is not a prediction.
• Educational and analytical tool, not financial advice.
— made with passion by officialjackofalltrades
Indicador
Indicador
Indicador
LWTG MITS Strategy**Title:** LWTG MITS Strategy
**Description:**
LWTG MITS (Multi-Indicator Trading System) is a rules-based mean-reversion and trend-following scoring engine designed for micro futures trading on prop firm accounts. It evaluates nine independent market conditions simultaneously and only enters a trade when a configurable minimum number of those conditions align — creating a high-confluence filter that reduces noise and improves signal quality.
**How the scoring system works**
Each bar, the script evaluates nine confluence factors across both long and short directions. Each factor that aligns with the potential trade direction adds one point to the score. A trade signal fires only when the score meets or exceeds the minimum threshold set in the inputs. The nine factors are:
1. **EMA Alignment** — Price relationship to short and long exponential moving averages confirms the directional bias
2. **VWAP Position** — Price position relative to the Volume Weighted Average Price filters entries against the intraday mean
3. **Momentum** — A custom momentum calculation confirms the strength of the current directional move
4. **Volume Confirmation** — Current bar volume relative to a rolling average confirms institutional participation
5. **Candlestick Pattern** — Engulfing and reversal patterns at key levels add a price action confirmation layer
6. **Volatility Filter** — ATR-based volatility measurement ensures entries occur in tradeable market conditions, not during dead zones
7. **RSI Filter** — Relative Strength Index prevents entries in overbought or oversold extremes where mean-reversion risk is highest
8. **ADX Filter** — Average Directional Index confirms sufficient trend strength before entry
9. **Market Regime** — A composite regime score (-6 to +6) derived from multiple timeframe analysis gates entries against the broader market direction. Counter-regime trades are blocked entirely
**Additional filters**
Beyond the nine confluence factors, the system includes:
- **Session time filter** — restricts trading to configurable intraday windows, avoiding low-liquidity periods
- **EOD cutoff** — automatically stops new entries before the end of the regular trading session
- **Session loss policy** — after a configurable number of consecutive losses, the system pauses entries for the remainder of the session
- **Daily loss limit** — blocks all new entries when cumulative session realized P&L drops below a configurable threshold
- **Trade direction control** — configurable to Long Only, Short Only, or Both
**Instruments**
Optimized and validated for micro futures: MES (Micro S&P 500), MNQ (Micro Nasdaq-100), M2K (Micro Russell 2000), and MGC (Micro Gold Futures). Each instrument has independently optimized default parameters.
**How to use this script**
This is the strategy version (v3.x). It uses TradingView's built-in strategy engine, which means it fires alerts on bar close and powers the built-in paper trading panel and strategy tester. It is designed to run alongside the companion indicator version (LWTG MITS Indicator) on the same chart.
Add the script to your chart, select the appropriate preset for your instrument in the inputs, and configure your minimum confluence score. The diagnostic panel on the chart displays real-time scoring, regime status, filter states, and session P&L.
Alert message format is JSON and is designed to integrate with automated order execution systems via webhook.
For full setup documentation, visit the companion GitHub repository linked in the author profile.
**Important:** This script is provided for educational purposes. All trading involves risk. Past performance does not guarantee future results. Always validate any trading system thoroughly before deploying with real capital.
Estratégia
PDHLC Previous Day High, Low, and Close## PDHLC — Previous Day High, Low, and Close
PDHLC is a customizable market-reference indicator that displays the previous trading day’s high, low, and close.
It was designed primarily for futures traders, but the user-defined trading-day start time allows it to be adapted to different instruments, sessions, and trading methodologies.
The indicator tracks three key reference levels:
* **PDH — Previous Day High**
* **PDL — Previous Day Low**
* **PDC — Previous Day Close**
## Key Features
### Custom Trading-Day Start Time
Users can define exactly when a new trading day begins using Eastern Time.
The default setting is:
* **6:00 PM ET**
* **18:00 using the 24-hour clock**
This matches the standard futures-session rollover used by many CME futures markets.
The start hour and minute can be changed independently, allowing the indicator to support:
* Different futures sessions
* Regular trading hours
* Overnight sessions
* Custom trading plans
* Non-futures instruments
The new trading day begins on the first chart bar at or after the selected start time.
### Previous Day High and Low
PDHLC calculates and displays the completed prior trading day’s:
* Highest traded price
* Lowest traded price
* Closing price
Each line begins at the opening bar of the current user-defined trading day.
### Confirmed PDH and PDL Breaches
PDH and PDL are not considered breached merely because price trades through them intrabar.
A confirmed breach requires:
* A candle close above PDH
* A candle close below PDL
Once a breach is confirmed, the corresponding line automatically changes to a dashed style for the remainder of the trading day.
This creates an immediate visual distinction between:
* Active, unbreached liquidity levels
* Levels that have already been closed through
The breach status resets when the next user-defined trading day begins.
### Directional PDC Coloring
The Previous Day Close dynamically changes color based on the current price relationship to PDC:
* **Bullish:** Price is above PDC
* **Bearish:** Price is below PDC
* **Neutral:** Price is equal to PDC
Bullish, bearish, and neutral PDC colors can be configured independently.
The original PDC directional logic remains separate from the PDH and PDL breach logic.
### Customizable Labels
Users can control:
* Label visibility
* Label size
* Label offset from the current bar
Available label sizes include:
* Small
* Normal
* Large
### Customizable Information Table
The built-in information table displays the current value and status of each level:
* **PDH:** Active or Breached
* **PDL:** Active or Breached
* **PDC:** Bullish, Bearish, or Neutral
## Why PDHLC Is Unique
Many previous-day indicators rely on fixed calendar days, automatically extend lines across the chart, or treat any temporary move beyond a level as a confirmed breakout.
PDHLC is different because it combines:
* A fully customizable trading-day start time
* A futures-compatible default of 6:00 PM ET
* Candle-close confirmation for PDH and PDL breaches
* Automatic dashed styling after confirmed breaches
* Separate directional logic for PDC
* Lines that begin at the current trading-day open
* Lines that end exactly at their labels
* Adjustable label distance from current price
* Fully customizable table size and location
This makes PDHLC useful for traders who incorporate previous-day liquidity, session structure, breakout confirmation, directional bias, and daily reference levels into their analysis.
## Intended Use
PDHLC can be used to identify:
* Previous-day liquidity targets
* Potential support and resistance
* Confirmed high or low breaks
* Current price location relative to the prior close
* Daily directional context
* Untouched versus breached prior-day levels
This indicator does not generate trade-entry signals and does not guarantee future results. It is intended as a market-structure, session-reference, and discretionary trading-analysis tool.
Indicador
Indicador
Last Day Candle Range Marker Version IIIThe Last Day Range Marker Version III is designed to visualize important price ranges from both the previous trading day and the current chart timeframe.
Features
• Displays the Previous Day High and Previous Day Low as customizable horizontal lines.
• Optionally highlights the previous day's range with a colored box.
• Displays the High and Low of the current chart timeframe candle.
• Optional range box for the current timeframe candle.
• Calculates and displays the percentage range (High–Low) for both the previous day and the current timeframe.
• Fully customizable colors, line styles (Solid, Dashed, Dotted), and line widths.
• Adjustable line length to the left and extension to the right.
• Individual on/off switches for the Previous Day and Timeframe sections.
• Clean labels showing High, Low, and percentage range directly on the chart.
Benefits
• Quickly identify important support and resistance levels.
• Compare the previous day's range with the current timeframe's price action.
• Ideal for breakout, range, momentum, and intraday trading strategies.
• Works on all symbols and all TradingView-supported timeframes.
The indicator is lightweight, easy to customize, and helps traders keep the most relevant price levels visible without cluttering the chart.
Indicador
Last Day Candle Range Marker Version IIIThe Last Day Range Marker Version III is designed to visualize important price ranges from both the previous trading day and the current chart timeframe.
Features
• Displays the Previous Day High and Previous Day Low as customizable horizontal lines.
• Optionally highlights the previous day's range with a colored box.
• Displays the High and Low of the current chart timeframe candle.
• Optional range box for the current timeframe candle.
• Calculates and displays the percentage range (High–Low) for both the previous day and the current timeframe.
• Fully customizable colors, line styles (Solid, Dashed, Dotted), and line widths.
• Adjustable line length to the left and extension to the right.
• Individual on/off switches for the Previous Day and Timeframe sections.
• Clean labels showing High, Low, and percentage range directly on the chart.
Benefits
• Quickly identify important support and resistance levels.
• Compare the previous day's range with the current timeframe's price action.
• Ideal for breakout, range, momentum, and intraday trading strategies.
• Works on all symbols and all TradingView-supported timeframes.
The indicator is lightweight, easy to customize, and helps traders keep the most relevant price levels visible without cluttering the chart.
Indicador
Indicador
RS Rating (Relative Strength) - Clean Table UIThis indicator calculates the Relative Strength (RS) Rating of a stock compared to the S&P 500 (SPY) and displays it as a clean, simple numerical value in a customizable table on your chart.
Unlike many complex swing data indicators that clutter your screen with moving averages, background colors, and multiple data points, this script is specifically designed for minimalist traders, day traders, and scalpers who only need to see the core RS Rating score at a single glance.
How It Works:
Core Calculation: It uses the standard weighted formula for 1-year performance (40% for the most recent quarter, and 20% for each of the previous three quarters) compared against the S&P 500 benchmark.
Percentile Ranking (1-99): Using market environment seed data, the raw score is converted into a true 1 to 99 percentile ranking. For example, an RS Rating of 85 means the stock is currently outperforming 85% of the overall market.
Color-Coded Signals: The numerical value automatically changes color based on the stock's momentum:
Green (>= 80): Strong market leader.
Red (<= 40): Weak laggard.
Custom/White: Neutral performance.
Features:
Zero Chart Clutter: No lines or shapes plotted over your candles. Just a single, elegant table.
Fully Customizable: You can easily change the table's position (Top/Bottom, Left/Right) and text size (Normal, Large, Huge) directly from the indicator settings to fit your exact workspace layout.
(Credits to the original open-source community and Fred6724 for the percentile mapping seed function utilized to power this clean UI version). Indicador
