Fibonacci EMA RSI Engine [StrixEDGE]StrixFIBER is a three-pillar confluence indicator that combines automatic Fibonacci retracement levels, EMA 50/200 trend structure, and RSI overbought/oversold detection into a single chart overlay. Signals fire only when multiple pillars confirm the same direction, with separate labels for standard and strong (all-three) confluence.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🔶 THE THREE PILLARS
PILLAR 1 — AUTO FIBONACCI
The indicator automatically calculates Fibonacci retracement levels (0%, 23.6%, 38.2%, 50%, 61.8%, 78.6%, 100%) from the highest high and lowest low over a configurable lookback period. All seven levels are plotted on the chart with price labels at the right edge.
The 50%–61.8% range is highlighted as the "Golden Zone" — the area where price most commonly finds support or resistance during healthy retracements. When price is within ATR proximity of a key Fibonacci level, the indicator scores it as "at support" or "at resistance" depending on price position relative to the 50% midpoint.
PILLAR 2 — EMA 50 / 200
The classic dual exponential moving average system. EMA 50 is colored green when above EMA 200 (bullish structure) and red when below (bearish structure). Golden Cross (EMA 50 crossing above EMA 200) and Death Cross (EMA 50 crossing below EMA 200) events are marked with diamond shapes on the chart.
The EMA pillar provides the trend context. Fibonacci support levels are more meaningful in a bullish EMA structure; resistance levels are more meaningful in a bearish structure.
PILLAR 3 — RSI OVERBOUGHT / OVERSOLD
RSI is calculated at a configurable length (default 14) with configurable OB/OS thresholds (default 70/30). The RSI line itself is not plotted (this is an overlay indicator), but OB and OS entries are marked as small colored circles above and below price bars.
OVERBOUGHT
OVERSOLD
The RSI pillar fires a bullish score when RSI recovers from oversold (crosses back above the OS threshold) and a bearish score when RSI drops from overbought (crosses back below the OB threshold). This captures the reversal moment, not just the extreme reading.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🔶 CONFLUENCE LOGIC
Each pillar scores +1 (bullish), −1 (bearish), or 0 (neutral) independently. The scores are aggregated:
→ 3/3 Pillars = "Strong Buy" or "Strong Sell" — all three pillars fully aligned. Highest conviction.
BUY -
SELL -
→ 2/3 Pillars = "Buy" or "Sell" — two of three pillars agree. Standard conviction.
→ 1/3 Pillars = No signal by default (configurable).
The minimum number of pillars required for a signal is adjustable (1, 2, or 3). Default is 2.
Additional signal filtering:
→ Flip-Only Logic: After a Buy, the next signal must be a Sell (and vice versa). No consecutive same-direction signals.
→ Cooldown: Configurable minimum bars between signals (default 10).
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🔶 VISUAL FEATURES
Fibonacci Levels
→ All 7 standard levels plotted as colored lines (thicker for 50% and 61.8%)
→ Golden Zone (50–61.8%) highlighted with a translucent fill
→ Price labels at the right edge of each level showing the exact price value
EMA System
→ EMA 50 colored by trend direction (green above EMA 200, red below)
→ EMA 200 as a steady reference line
→ Golden Cross (GC) and Death Cross (DC) diamond markers
RSI Markers
→ Small green circles below bars when RSI enters oversold
→ Small red circles above bars when RSI enters overbought
→ RSI value displayed in the dashboard (not as a separate pane line)
Signals
→ Buy / Sell labels with exact entry price
→ "Strong Buy" / "Strong Sell" labels when all 3 pillars align (darker color for distinction)
→ Entry price horizontal line persists for 20 bars
→ ATR-based stop-loss level plotted below/above entry
Dashboard
→ EMA trend status with direction
→ RSI current value and zone (Overbought / Oversold / Neutral)
→ Fibonacci proximity status (At Support / At Resistance / Between)
→ Nearest Fibonacci level with distance in ATR units
→ Pillar confluence count and direction
→ Last signal direction and age (bars ago)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🔶 SETTINGS GUIDE
Fibonacci
• Lookback Period (default 120) — Bars used for highest high / lowest low. Increase for wider retracement levels, decrease for tighter ones.
• Fibonacci Proximity (default 0.5 ATR) — How close price must be to a level to count as "at support/resistance." Lower = stricter.
EMA
• Fast EMA (default 50) — The responsive trend line.
• Slow EMA (default 200) — The structural trend anchor.
RSI
• Length (default 14) — Standard RSI lookback.
• Overbought (default 70) / Oversold (default 30) — Zone thresholds.
Signals
• Minimum Pillars (default 2) — Set to 3 for highest quality signals only.
• Cooldown (default 10 bars) — Minimum spacing between signals.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🔶 WHAT MAKES THIS ORIGINAL
While Fibonacci, EMA, and RSI are individually common, StrixFIBER integrates them through a structured pillar scoring system with proximity-based Fibonacci detection, RSI recovery signals (not raw readings), and automatic signal strength classification. The confluence layer evaluates whether a Fibonacci level is meaningful (is the EMA structure supporting it? is momentum confirming it?) rather than displaying the three tools independently. The ATR-based proximity detection for Fibonacci levels, combined with the transition-based RSI scoring and flip-only signal enforcement, creates a framework that is more than the sum of its parts.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🔶 RECOMMENDED USE
Designed for day trading on 15-minute to 1-hour charts across all markets: crypto, forex, stocks, indices, and commodities. Works well alongside StrixEDGE (trend confluence overlay) and StrixPULSE (pressure spectrum in a separate pane) for a complete multi-indicator setup.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
⚠️ DISCLAIMER
This indicator is a technical analysis tool, not financial advice. No indicator guarantees profitable outcomes. Past performance of any signal does not indicate future results. Always apply proper risk management and use this tool as one component of a complete trading plan.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
5 alert conditions: Buy Signal, Sell Signal, Any Signal, Golden Cross, Death Cross. 指标
Pressure Spectrum Analyzer [StrixEDGE]StrixEDGE is a pressure spectrum analyzer that decomposes each candle into its buying vs selling pressure components, then visualizes pressure alignment across eight Fibonacci-based lookback periods as a real-time colored heatmap ribbon. Instead of relying on derived calculations from close prices alone, it reads the internal anatomy of every candle to reveal what buyers and sellers are actually doing.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🔮 CORE CONCEPT — CANDLE PRESSURE DECOMPOSITION
Most indicators process the closing price through mathematical formulas. StrixEDGE starts differently: it decomposes each candle's anatomy into a net pressure score.
→ Buying pressure = (close − low) / (high − low)
→ Selling pressure = (high − close) / (high − low)
→ Net pressure = buying − selling → ranges from −1 to +1
A candle closing at its absolute high scores +1 (pure buying dominance). A candle closing at its low scores −1 (pure selling dominance). A doji closing at the midpoint scores 0 (equilibrium). This raw pressure reading captures information that close-price-only indicators miss entirely: wick rejections, body dominance, and where within the range the session actually settled.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🔮 THE FIBONACCI SPECTRUM — 8 BANDS
The raw net pressure is then smoothed with an EMA at eight Fibonacci lookback periods:
Band 1 → 3 bars (ultra-fast, reacts to individual candles)
Band 2 → 5 bars
Band 3 → 8 bars
Band 4 → 13 bars
Band 5 → 21 bars
Band 6 → 34 bars
Band 7 → 55 bars
Band 8 → 89 bars (trend anchor, moves slowly)
Each band is displayed as a horizontal color stripe. The result is an 8-layer heatmap ribbon that updates every bar:
→ Bright green = strong buying pressure at that period
→ Pale green = moderate buying
→ Gray = neutral / equilibrium
→ Pale red = moderate selling
→ Bright red = strong selling pressure
The visual effect is immediate: when all 8 bands turn the same color, the market is in full alignment. When they diverge (top bands green, bottom bands red, or vice versa), the market is in transition — and that transition is where the edge lives.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🔮 HOW TO READ THE RIBBON
ALL BANDS GREEN — Full bullish convergence. Buying pressure dominates across all timeframes from 3-bar to 89-bar. Strong trend in progress.
ALL BANDS RED — Full bearish convergence. Selling pressure dominates across all timeframes. Strong downtrend in progress.
MIXED COLORS — Disagreement between timeframes. The market is choppy, consolidating, or transitioning. No clear edge.
BOTTOM BANDS FLIP FIRST — The fast periods (3, 5, 8) change color before the slow periods (34, 55, 89). This is a momentum wave forming — an early reversal signal before the full spectrum converges. StrixEDGE marks these moments with yellow diamond markers (◆).
TOP BANDS HOLD WHILE BOTTOM FLIP — The trend anchor (slow periods) remains in one direction while fast periods temporarily flip. Often a pullback within a larger trend, not a reversal.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🔮 WAVE DETECTION — EARLY REVERSAL WARNING
StrixEDGE includes a proprietary wave detection system. It identifies when the three fastest bands (3, 5, 8) have already flipped direction while the three slowest bands (34, 55, 89) have not. This divergence between fast and slow pressure readings often precedes a full spectrum convergence by several bars, giving an early warning of potential trend shifts.
Wave markers appear as yellow diamonds (◆) on the ribbon. They are not entry signals — they are attention signals. When a wave marker appears, watch for the remaining bands to follow. If they do, a full convergence signal follows.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🔮 SIGNAL GENERATION
Buy and Sell signals fire when the spectrum achieves convergence:
1. Convergence Threshold — A configurable minimum number of bands (default 6 out of 8) must agree on the same direction.
2. Transition Detection — The signal fires only on the bar where the convergence count first crosses the threshold, not on every bar it remains above it.
3. Flip-Only Logic — After a Buy signal, the next signal must be a Sell (and vice versa). No consecutive same-direction signals.
4. Cooldown — A configurable minimum number of bars between signals (default 10).
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🔮 THE PULSE LINE
A composite line overlaid on the ribbon shows the average pressure across all 8 bands, scaled to the ribbon's visual range. It provides a single-glance summary of the aggregate market pressure:
→ Pulse above midline and green = net buying pressure
→ Pulse below midline and red = net selling pressure
→ Pulse at midline and gray = equilibrium
The pulse line often leads the ribbon visually — it can curl toward the midline before the individual bands start flipping, providing another layer of early warning.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🔮 DASHBOARD
The on-chart dashboard displays:
→ Real-time pressure reading for each of the 8 bands with directional arrows
→ Convergence count and direction (e.g., "6 / 8 BULL")
→ Composite pulse value
→ Current wave status (Bull Forming / Bear Forming / None)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🔮 SETTINGS GUIDE
Spectrum
• Bullish Threshold (default 0.15) — Pressure above this value counts as bullish for convergence scoring. Lower = more sensitive.
• Bearish Threshold (default −0.15) — Pressure below this counts as bearish. Closer to zero = more sensitive.
Signals
• Convergence Minimum (default 6) — How many of the 8 bands must agree. Range 3-8. Higher = fewer but stronger signals.
• Signal Cooldown (default 10 bars) — Minimum spacing between consecutive signals.
Display
• Show Pulse Line — Toggle the composite pressure overlay.
• Show Wave Markers — Toggle early reversal diamonds.
• Show Dashboard — Toggle the status table.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🔮 WHAT MAKES THIS ORIGINAL
StrixEDGE is not a wrapper around existing indicators. Its originality lies in three layers:
1. The data source is candle anatomy (body position within range), not close price or volume alone. This extracts buying/selling pressure information that close-price-derived indicators structurally cannot access.
2. The multi-period spectrum approach displays pressure alignment across eight simultaneous timeframes in a single visual. Standard oscillators show one reading at one lookback period. StrixPULSE shows eight readings simultaneously as a heatmap, making convergence and divergence visible at a glance.
3. Wave detection identifies the propagation pattern — when fast periods lead slow periods in a directional flip — as a standalone analytical feature. This captures the internal momentum dynamics of a trend change, not just the result.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🔮 RECOMMENDED USE
Designed for day trading timeframes (15-minute to 1-hour). Works across all markets with standard OHLC data: crypto, forex, stocks, indices, commodities. Best used as a companion below the main chart alongside an overlay indicator (such as StrixEDGE or any trend-following system). The ribbon provides the conviction layer — it answers "should I trust this signal?" by showing whether the pressure spectrum supports the trade direction.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
⚠️ DISCLAIMER
This indicator is a technical analysis tool, not financial advice. No indicator guarantees profitable outcomes. Past performance of any signal does not indicate future results. Always apply proper risk management and use this tool as one component of a complete trading plan.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
5 alert conditions: Buy Signal, Sell Signal, Any Signal, Bull Wave, Bear Wave. 指标
Adaptive Confluence Engine [StrixEDGE]Adaptive Confluence Engine
🔷 HOW IT WORKS
The indicator evaluates the market through four independent modules. Each module scores the current bar as bullish (+1), bearish (−1), or neutral (0). Volume and volatility modules act as confirmation filters and score +1 (confirmed) or 0 (not confirmed). The individual scores are aggregated into a confluence score ranging from 0 to 4 for each direction.
A signal fires only when:
→ The confluence score crosses above the minimum threshold (transition detection)
→ The previous signal was in the opposite direction (flip-only logic — no consecutive Buy-Buy or Sell-Sell)
→ A cooldown period has elapsed since the last signal
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🔷 THE FOUR MODULES
MODULE 1 — TREND
Uses a Hull Moving Average (HMA) for responsive trend direction and a Weighted Moving Average (WMA) as a trend position filter. Bullish: HMA rising AND price above WMA. Bearish: HMA falling AND price below WMA. The HMA reacts faster than a standard EMA while filtering out noise, and the WMA acts as a structural trend gate.
MODULE 2 — MOMENTUM
Combines RSI zone analysis with MACD histogram acceleration. RSI is evaluated against configurable directional thresholds (default 55/45), not traditional overbought/oversold levels. The MACD histogram must be positive AND increasing for bullish momentum (or negative AND decreasing for bearish). This captures momentum that is actively building, not fading.
MODULE 3 — VOLUME
Volume must exceed its simple moving average by a configurable multiplier AND the short-term volume trend (5-bar SMA) must be rising relative to the medium-term (10-bar SMA). This confirms that participation is genuine and sustained, not a single-bar spike.
MODULE 4 — VOLATILITY FILTER
Calculates the ATR percentile rank over a configurable lookback period. Signals are suppressed when volatility falls below the low percentile (indicating a dead, range-bound market with no follow-through potential) or above the high percentile (indicating chaotic conditions where stops are too wide and reversals too sudden). Only the "sweet spot" of volatility passes.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🔷 SIGNAL LOGIC
The signal generation uses three layers of filtering:
1. Transition Detection — Signals fire only on the bar where the confluence score first crosses the minimum threshold, not on every bar it remains above it.
2. Flip-Only Mode — After a Buy signal, the next signal must be a Sell (and vice versa). This prevents consecutive same-direction signals and ensures alternating entries.
3. Cooldown — A configurable minimum number of bars must pass between any two signals, preventing rapid-fire entries during volatile transitions.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🔷 VISUAL FEATURES
→ Buy / Sell labels with exact entry price displayed on the chart
→ Entry price horizontal line (persists for 20 bars after signal)
→ ATR-based dynamic stop-loss levels
→ Hull Moving Average (colored by direction) and WMA overlay
→ Background shading when confluence is active
→ Real-time dashboard showing status of all four modules, ATR reading with percentile, and aggregate confluence score
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🔷 SETTINGS GUIDE
Trend Module
• Fast HMA Length (default 9) — Lower values react faster but produce more noise.
• Slow WMA Length (default 21) — The structural trend gate. Higher values require stronger trends.
Momentum Module
• RSI Bullish/Bearish Threshold (default 55/45) — These are directional filters, not overbought/oversold. Widen to 60/40 for stricter momentum requirements.
• MACD settings (12/26/9) — Standard defaults. Adjust for faster or slower momentum reads.
Volume Module
• Volume SMA Length (default 20) — Lookback for average volume calculation.
• Volume Threshold (default 1.0) — Multiplier applied to the volume SMA. Increase to 1.2–1.5 to require above-average volume.
Volatility Filter
• ATR Length (default 14) — Period for ATR calculation.
• ATR Lookback (default 100) — Number of bars for percentile ranking.
• Low/High Vol. Percentile (default 10/90) — Defines the acceptable volatility range. Narrow to 20/80 for stricter regime filtering.
Signal Control
• Min. Confluence Score (default 3) — Number of modules that must agree. Higher = fewer but higher-quality signals.
• Signal Cooldown (default 5 bars) — Minimum spacing between signals.
• Stop-Loss ATR Multiple (default 1.5) — Distance of the stop-loss from the signal bar.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🔷 WHAT MAKES THIS ORIGINAL
StrixEDGE does not replicate any single built-in indicator. Its value lies in the confluence scoring architecture: four independent analysis dimensions, each evaluating a different market property (direction, momentum, participation, regime), aggregated through a transition-based scoring system with flip-only signal control. The combination of ATR percentile volatility filtering, MACD histogram acceleration (not just crossover), and alternating-direction signal enforcement creates a framework that is structurally distinct from standard indicator overlays.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🔷 RECOMMENDED USE
Designed for day trading timeframes (15-minute to 1-hour charts). Works across all markets with volume data: crypto, forex, stocks, indices, commodities. Start with the default settings and adjust based on the instrument's behavior. Use the dashboard to understand why signals fire or don't fire.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
⚠️ DISCLAIMER
This indicator is a technical analysis tool, not financial advice. No indicator guarantees profitable outcomes. Past performance of any signal does not indicate future results. Always apply proper risk management and use this tool as one component of a complete trading plan.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
5 alert conditions available: Buy Signal, Sell Signal, Any Signal, Bull Active, Bear Active. 指标
Trendsetter Labs Ai (public)Purpose:
The TIA Trend Indicator is a versatile trading tool designed to assist traders in identifying the prevailing market trend. Its utility spans across various trading styles, including swing trading, intraday trading, and scalping. The indicator is built to be intuitive and user-friendly, making it suitable for traders at all experience levels.
Functionality:
Employs Moving Averages and the Relative Strength Index (RSI) for trend analysis.
Provides "Bullish" or "Bearish" labels based on the analysis of selected timeframes, helping traders to understand the current market sentiment.
Offers customizable settings to adapt to different trading approaches.
Key Features:
Clear Visual Cues: Displays simple "Bullish" or "Bearish" text labels to indicate market conditions, keeping the chart uncluttered.
Customizable Timeframe Selection: Users can choose the timeframe for data analysis, allowing the indicator to be tailored to various trading strategies.
Adaptable to Various Trading Styles: Whether you're a swing trader, day trader, or scalper, this indicator can be configured to suit your specific needs.
Recommended Settings:
Intraday Traders:
Timeframe for Data: 15 minutes or 30 minutes.
These settings offer a balance, capturing the day's key movements without the noise of shorter timeframes.
Scalpers:
Timeframe for Data: 1 minute or 5 minutes or 15 minutes.
For those looking to make quick trades and capitalize on small movements, these settings provide rapid and relevant market insights.
Usage Tips:
Utilize the indicator to gauge the overall market direction and align your trades accordingly.
Combine with other forms of analysis (like volume indicators, price action, or additional technical tools) for comprehensive decision-making.
Always consider risk management practices, irrespective of your trading style.
Ideal for All Traders:
The TIA Trend Indicator is designed to be an essential tool for traders of all types. Whether you're just starting or are a seasoned trader, this tool can enhance your market analysis and help in making informed trading decisions. 指标
JSS - SMC / ICT Time-Fibs & LiquidityAn all-in-one institutional toolkit designed to trade the New York Session using Time-Based Standard Deviations, Smart Money Concepts (SMC), and algorithmic liquidity targets.
Instead of drawing random Fibonacci retracements, this indicator traps the opening volatility of the market and mathematically projects exactly where the algorithms will exhaust.
Core Features :
The Time-Box Fibs : Automatically maps the Overnight Macro Range (22:00–11:00) and the New York Open Micro Range (15:00–16:00).
Institutional Liquidity Lines : Automatically draws your essential daily, weekly, and monthly HTF midpoints (PDH, PDL, PD50, PW50, PM50, and True Daily Open).
Dynamic FVG & IFVG Scanner : Highlights Fair Value Gaps with dashed equilibrium lines. When an FVG is closed through, it transforms into an Inverted FVG. To keep your chart perfectly clean, the engine tracks all gaps in the background but only highlights the exact IFVG closest to live price. 指标
指标
Adaptive Squeeze Breakout [NQ Labs]
Adaptive Squeeze Breakout
The Adaptive Squeeze Breakout combines two concepts into a single volatility-timing tool: adaptive Bollinger Bands that adjust to the current volatility regime, and a squeeze-to-breakout system that identifies volatility compression before expansion.
The Two Core Ideas:
1. Adaptive Bollinger Bands
Standard Bollinger Bands use a fixed deviation multiplier, which means they treat trending and choppy conditions identically. This version adjusts the deviation using a Kaufman-style efficiency ratio — a measure of how directional recent price movement has been relative to its total path.
When price is moving efficiently (trending), the bands widen to give the move room. When price is chopping back and forth (low efficiency), the bands tighten. The result is a band that breathes with the market's character rather than applying one setting everywhere. The Adaptive Strength input controls how much this effect is applied, from fully fixed (0) to fully adaptive (1).
2. Squeeze-to-Breakout
A "squeeze" occurs when volatility compresses — often preceding a larger move. This is detected by measuring when the adaptive Bollinger Bands contract inside the Keltner Channels. While the bands sit inside the Keltner range, the market is coiling. When they expand back outside, the squeeze releases, and the tool flags the breakout in the direction of momentum.
How It Works On The Chart:
▢ Adaptive Bands — The Bollinger Bands, colored by momentum direction, with the deviation adjusting to volatility efficiency.
▢ Squeeze Highlight — An amber background and marker dots appear while the market is in a squeeze (bands compressed inside the Keltner Channels), giving an at-a-glance view of coiling conditions.
▢ Breakout Signals — A triangle marks the bar where a squeeze releases, pointing in the direction of momentum at that moment.
▢ Dashboard — A panel showing the current squeeze state, momentum direction, bandwidth percentile (where current volatility sits historically), volatility regime (compressed / normal / expanded), and the live adaptive deviation value.
Settings:
All components are adjustable: Bollinger length and base deviation, adaptive strength, Keltner length and ATR multiplier, and full control over visuals, colors, and the dashboard position. Alerts are available for breakouts (up and down) and for the start of a squeeze.
How Traders Might Use It:
The squeeze highlights conditions of volatility compression, which some traders use as a preparation signal — a period to watch for an impending expansion rather than to trade the range itself. The breakout marker then indicates the direction in which the compression resolved. As with any volatility tool, squeezes can release in either direction and can produce false starts, so many traders combine this with a trend or structure filter rather than trading breakouts in isolation.
Notes:
This indicator visualizes volatility conditions and breakout timing. It does not predict direction with certainty and makes no claim about future performance. It is intended as one component within a broader analysis process. Results vary across markets, timeframes, and conditions — test thoroughly before relying on it.
Open-source and free to use.
Feedback and suggestions are welcome. 指标
EMA Pulse Momentum System [StrixEDGE]Overview
The EMA Pulse Momentum System is a trend-following indicator that combines a triple exponential moving average (EMA) ribbon with an RSI-based momentum gate to produce high-confidence directional signals on trending instruments. Unlike single-crossover systems that generate excessive noise, this indicator requires simultaneous alignment across three conditions before printing an entry — which significantly reduces false positives in ranging or choppy market environments.
How the signal logic works
The system operates on a three-layer confirmation model:
1. EMA Ribbon Alignment. Three EMAs are computed: a fast EMA (default 8), a mid EMA (default 21), and a slow EMA (default 55). For a valid long setup, all three must be fully stacked in ascending order (EMA 8 above EMA 21, EMA 21 above EMA 55). The reverse applies for short setups. This stacking condition eliminates entries during period of EMA compression or crossover noise, and acts as a structural trend filter. The ribbon also fills with a color-coded cloud between EMA 8 and EMA 21, providing instant visual feedback on trend health.
2. RSI Momentum Gate. Even with a clean ribbon, markets can trend without momentum confirmation — particularly after extended runs. A 14-period RSI is applied as a secondary gate: RSI must be above 52 to confirm bullish momentum, or below 48 to confirm bearish. These thresholds are intentionally set close to the 50 midline rather than the classic 70/30 extremes, because the goal is to confirm that momentum is directionally engaged, not to identify overbought or oversold conditions. The RSI thresholds are fully adjustable in settings.
3. Crossover Trigger. The entry fires only when EMA 8 crosses above EMA 21 (long) or below (short) while both the ribbon stack and RSI gate are simultaneously satisfied. The crossover itself does not generate a signal if either condition fails.
Risk management — ATR-based TP and SL
All risk levels are calculated dynamically using the Average True Range (ATR) over 14 periods, which adapts automatically to current market volatility. This means tighter levels during low-volatility regimes and wider levels during expansion — no manual adjustment required.
— Take Profit: Entry price ± (ATR × 2.0)
— Stop Loss: Entry price ± (ATR × 1.2)
— Default Risk-to-Reward ratio: 1.67 : 1 minimum
TP, SL, and entry lines are drawn forward 30 bars from each signal and labeled with exact price levels. All multipliers are adjustable via the settings panel.
Information table
A real-time dashboard table (position configurable: Bottom Right, Bottom Left, Top Right, Top Left) displays:
— Current trend direction (Bullish / Bearish / Neutral)
— Live RSI value with color coding
— Current ATR value for sizing context
— Last signal direction (Long / Short)
— Calculated Risk-to-Reward ratio
— EMA stack status (aligned or mixed)
Recommended usage
Best timeframes: 4H and Daily. The indicator functions on all timeframes but performs most reliably where EMA 8/21/55 have enough separation to define structure. On 1H or below, the signal frequency increases but false positives also rise — compensate by tightening RSI thresholds in settings.
Compatible with all liquid markets: Forex majors, Crypto (BTC, ETH, majors), Stocks, Indices, and Futures.
Avoid using this indicator as a standalone system during known high-impact news events (FOMC, NFP, CPI) where price gaps can invalidate ATR-based stops instantly.
Alerts
Two built-in alert conditions are included:
— "EMA Pulse — Long Entry": fires when all long conditions are satisfied
— "EMA Pulse — Short Entry": fires when all short conditions are satisfied
Configure via the Alerts panel in TradingView using "Once per bar close" for cleanest signals.
Settings reference
EMA Fast (default 8) — reduce for more sensitivity, increase to reduce noise
EMA Mid (default 21) — core crossover reference line
EMA Slow (default 55) — structural trend filter
RSI Length (default 14) — period for momentum gate
RSI Bull Threshold (default 52) — minimum RSI for long confirmation
RSI Bear Threshold (default 48) — maximum RSI for short confirmation
ATR Length (default 14) — volatility lookback for TP/SL
TP Multiplier (default 2.0) — take profit distance in ATR units
SL Multiplier (default 1.2) — stop loss distance in ATR units
Limitations
This indicator is a technical analysis tool and does not constitute financial advice. Past signal performance does not guarantee future results. Always use proper position sizing and risk management independent of any indicator output. 指标
CP Algo Pro V2.3CP Algo Pro V2
CP Algo Pro V2 is a technical analysis indicator designed to identify high-probability trading opportunities by combining trend, momentum, and market structure.
Features
Automatically detects BUY and SELL signals.
Displays Entry, Stop Loss, TP1, TP2, and TP3.
Supports both Fast and Normal modes.
Automatically adjusts TP/SL based on the selected Symbol and Timeframe.
Allows manual TP/SL customization.
Includes a built-in daily performance dashboard.
Supports multiple markets, including XAUUSD, XAGUSD, BTCUSD, and custom symbols.
Compatible with TradingView Alerts for Telegram notifications and Webhook integrations.
Dashboard
Total Trades
TP1 Hit
TP2 Hit
TP3 Hit
SL Hit
Win Rate
TP Statistics
Take-profit statistics are calculated based on the highest target actually reached by price:
If price reaches TP1, TP1 is counted.
If price reaches TP2, both TP1 and TP2 are counted.
If price reaches TP3, TP1, TP2, and TP3 are all counted.
Stop Loss is counted only if price has not reached TP1.
This ensures:
TP1 ≥ TP2 ≥ TP3
Performance statistics accurately reflect the actual progression of price movement.
Disclaimer
CP Algo Pro V2 is designed to assist traders with technical analysis and trade management. It should be used alongside proper risk management and independent market analysis before making any trading decisions. Past performance does not guarantee future results. 指标
指标
指标
指标
Session Highlighter & Fractals
Session Highlighter & Fractals
A clean session-tracking tool built for intraday traders who want to see exactly where price sits relative to the Asian, London, and New York sessions — combined with Williams Fractal swing points for structure reference.
Features:
Three independently configurable sessions (Asian, London, New York) — each with its own time window, on/off toggle, and color
Background highlighting for the full duration of each active session, with an adjustable transparency slider so the shading never overwhelms your price action
Start/End labels on every session transition — fully customizable text (defaults to "Asian Start", "Asian End", etc.) so you can rename them to match your own trading vocabulary
Timezone control — a dropdown of standard timezones so session boundaries align exactly with whatever timezone your chart is displaying, rather than relying on the exchange's default timezone
Williams Fractals — classic 5-bar swing high/low detection, plotted directly on the chart with green/red triangle markers
Built-in alerts for both bullish and bearish fractal prints, so you can get notified the moment a new swing point forms without watching the chart
How to use it:
Set your chart's timezone (bottom-right clock icon), then match that same timezone in the indicator's settings so session windows line up correctly. Adjust each session's start/end time if you trade a custom window rather than the standard session hours. Toggle labels on or off depending on whether you want a cleaner chart or explicit markers at every transition.
This script is intended as a visual and structural reference tool — it does not generate buy/sell signals and should be combined with your own strategy, risk management, and market analysis. 指标
指标
策略
指标
指标
指标
指标
指标
指标
指标
指标
