指标
JRI SMC v12THE JRI SMART MONEY STRATEGY
Philosophy
You trade with institutions, not against them. Every decision flows from the higher timeframe down to the lower timeframe. You never enter on a lower timeframe without confirmation from above.
STEP 1 — WEEKLY (Big Picture)
Start here every week before you trade anything.
Find the ATH and ATL on the chart. These are your absolute boundaries — price respects these levels hard. Note whether the weekly candle is bullish or bearish. Is price making Higher Highs and Higher Lows (bullish) or Lower Highs and Lower Lows (bearish)? This tells you the macro bias. Only trade in the direction of the weekly trend unless you have an extremely strong counter-trend setup.
STEP 2 — DAILY (Directional Bias)
This is where you determine your bias for the week.
Look for the most recent swing High and swing Low. Mark them. Is price respecting a previous HH or HL? Is it breaking below a HL (bearish shift) or above a LH (bullish shift)? Measure the wick of the previous day’s candle — the wick shows where institutions rejected price. That rejection zone becomes your supply or demand area. The daily bias tells you whether you’re only looking for BUYs or only looking for SELLs on the lower timeframes that day.
STEP 3 — 4 HOUR (Key Levels and Zones)
This is your map for the trading session.
Draw your key psychological levels — on Gold these are every 100 points: 4700, 4800, 4900, 5000. Price always gravitates toward and reacts at these round numbers because that’s where institutions place large orders. Mark your supply zones (areas where price sold off hard from) and demand zones (areas where price bounced hard from). These become your trade locations — you only look to enter when price reaches one of these zones, not in the middle of a range.
STEP 4 — 2 HOUR (Institutional Activity)
This is where you identify what the big players are doing.
Look for institution candles — large body candles that are 2x the average size. These are institutions entering positions. After a large institution candle, price often comes back to mitigate (retest) that candle before continuing. That mitigation point is a high-probability entry. Also look for liquidity sweeps — when price wicks above a recent high or below a recent low and immediately closes back. This is institutions hunting stops before the real move. After a liquidity sweep, the move goes the other direction.
STEP 5 — 1 HOUR (Entry Zone)
Now you’re narrowing down exactly where to enter.
Look for retracements back into the 4H supply or demand zone. If the daily bias is bullish and price pulls back to a 4H demand zone on the 1H, that’s your entry zone. Look for the 1H to show a Break of Structure in your direction — a BOS confirms institutions have shifted. If the trend is already running strong, you can enter on a retest of the broken structure level rather than waiting for a deep pullback.
STEP 6 — 30 MINUTE (Counter Trend Lines and Confirmation)
This refines your entry timing.
Draw a counter trend line against the current move. When price breaks that counter trend line in the direction of your bias, that’s your trigger to prepare for entry. This is also where you confirm SMC concepts — look for a mitigation block, an order block, or a fair value gap that price is filling before continuing your direction.
STEP 7 — 15 MINUTE (Final Entry Confirmation)
Your signal timeframe.
This is where the JRI indicator fires. All 7 conditions need to align — bias, zone, BOS, retest, VWAP, EMA stack, RSI. When the score hits 5, 6, or 7 out of 7 the signal fires. On your funded account only take 6/7 or 7/7. On personal accounts 5/7 is acceptable. The 15m gives you enough detail to see the setup clearly without being too noisy.
STEP 8 — 5 MINUTE and 1 MINUTE (Precision Entry and Scalping)
This is where you time the exact entry.
On the 5m and 1m you’re looking for the same things — liquidity sweeps, institution candles, BOS — but at a micro level. For scalps you enter at the candle HIGH on a BUY or candle LOW on a SELL. Your stop goes below the candle LOW on BUY or above the candle HIGH on SELL with 0.8x ATR buffer. You measure the move in 1:3 risk-reward.
RISK MANAGEMENT RULES — NON NEGOTIABLE
These apply to every single trade no exceptions.
At T1 (1:1 R) — take 50% of your position off. Lock in profit. This is not optional.
At T2 (1:2 R) — move your stop loss to your entry price. You are now in a risk-free trade.
At T3 (1:3 R) — close the remaining position. Full target hit.
Never move your stop loss against you. Never add to a losing position. If you’re in a funded account and the trade hits your SL, that’s the end of that trade. No revenge trading.
THE 7 CONDITIONS YOUR INDICATOR CHECKS
1. Bias — Is the market structure bullish (HH+HL) or bearish (LH+LL)?
2. In Zone — Is price inside a confirmed supply or demand zone?
3. BOS — Did price break a recent structure level in your direction?
4. Retest — Did price come back and test that broken level?
5. vs VWAP — Is price above VWAP for buys, below for sells?
6. EMA Stack — Is EMA 20 above EMA 50 for buys, below for sells?
7. RSI — Is RSI above 50 for buys, below 50 for sells?
All 7 pointing the same direction means institutions are aligned with your trade. That’s when you pull the trigger.
YOUR SESSION SCHEDULE
Your primary window is the NY Open — 6:30am PST. This is when the highest volume hits and the cleanest moves happen. Gold (MGC/GC) and NQ are your instruments. Run your top-down analysis the night before or early morning before the open. Have your levels marked, your bias set, your zones identified. When the open hits you’re ready to execute, not still analyzing. 指标
指标
指标
策略
指标
Smart Buy Sell MultiConfluence GerardMali⚡ Smart Buy/Sell — Multi-Indicator Confluence System
A high-confluence buy and sell signal indicator that combines seven of the most reliable technical indicators into a single, easy-to-read system. Instead of relying on one indicator alone — which produces too many false signals — this script requires multiple conditions to align simultaneously before triggering a signal. The result is fewer signals, but with significantly higher probability.
How It Works
Every bar, each indicator casts a vote — bullish or bearish. The votes are tallied into a score out of 7. A buy or sell signal only fires when the score meets your minimum threshold AND a crossover event (MACD, Stochastic, EMA, or RSI) acts as the trigger. This two-step requirement — background setup + timing trigger — filters out noise and keeps you out of choppy, low-conviction conditions.
Indicators Used
EMA Alignment (9 / 21 / 50 / 200) — trend direction and stack confirmation
RSI (14) — momentum and overbought/oversold zones
MACD (12, 26, 9) — trend momentum and crossover trigger
Stochastic (14, 3, 3) — entry timing from overbought/oversold levels
ADX (14) — trend strength filter
Bollinger Bands (20, 2) — price position relative to volatility range
Volume — confirms conviction behind each move
What You See on the Chart
🟢 Green triangle = BUY signal with score (e.g. "BUY 6/7")
🔴 Red triangle = SELL signal with score (e.g. "SELL 5/7")
Dashed lines = ATR-based Stop Loss and two Take Profit levels (auto-calculated from the most recent signal)
Background shading = green during bullish EMA alignment, red during bearish alignment
Top-right table = live dashboard showing the real-time status of every indicator
Settings
All indicator lengths are fully customizable. The key setting is Min Score to Trigger — set it to 4 for balanced signals, 5–6 for high-quality setups only, or 3 for more frequent entries. Stop loss and take profit distances are set using ATR multipliers, making them adaptive to current volatility on any timeframe.
Works on any timeframe and any instrument — indices, forex, crypto, commodities, and stocks.
Disclaimer: This indicator is for educational and informational purposes only. It does not constitute financial advice. Always use proper risk management and do your own research before trading.
指标
指标
指标
MTF Price Line SNIPER AUTOA professional multi-timeframe price line overlay designed to visualize market structure, momentum, and higher-timeframe context in a single, clean view. This tool replaces traditional candles with smooth price lines and provides flexible combinations for different trading styles—from fast M1 scalping to higher-timeframe bias analysis.
Core Concept
The indicator plots multiple dynamically scaled price lines based on the current chart timeframe:
Chart TF (M1 / current TF) → Entry & execution
x5 → Short-term flow
x15 → Intraday trend structure
H1 → Higher-timeframe context
H4 → Macro direction
All higher timeframes are automatically recalculated relative to your current chart timeframe. This ensures consistency whether you are on M1, M5, or M15—without using traditional HTF requests (no step-like plotting).
Key Features
Smooth Line Rendering
No stair-stepping. All lines are synthetically calculated for a continuous, fluid appearance.
Auto Multi-Timeframe Scaling
Timeframes adjust automatically when switching charts (e.g., M1 → M5 → M15).
Independent Visibility Controls
Each timeframe (Chart, x5, x15, H1, H4) can be individually enabled or disabled.
Customizable Appearance
Fully adjustable colors and line widths for each timeframe.
Momentum Coloring (M1)
Optional neon-based momentum coloring on the chart timeframe:
Green → bullish momentum
Red → bearish momentum
Momentum Overlay on x15 (Optional)
The x15 line can reflect M1 momentum, allowing you to view lower-timeframe pressure within higher-timeframe structure.
RSI-Based Coloring (Optional)
Global RSI filter for overbought/oversold conditions across all lines.
How to Use
1. Pure Line Chart Mode
Disable TradingView candles
Use only the indicator lines
→ Clean structure view (ideal for flow & trend reading)
2. Hybrid Mode (Recommended)
Keep TradingView candles ON
Disable selected lines (e.g., Chart TF or x5)
Example:
Candles ON
Chart line OFF
x5 ON
→ You get candles for execution + x5 flow overlay
Typical Configurations
Scalping (M1)
Chart TF: ON
x5: ON
x15: optional
H1/H4: OFF
Sniper Entries
Chart TF: ON
x5: ON
x15: ON
Bias / Direction
x15: ON
H1: ON
H4: ON
Chart TF: optional
Interpretation
Alignment across timeframes → high-probability moves
Chart TF leads, higher TFs follow → confirms trend development
Divergence between TFs → pullback or weak structure
Flat / crossing lines → ranging market (low quality conditions)
Important Notes
This is a synthetic MTF model, not a direct higher-timeframe feed
Designed for clarity and responsiveness, not lagging confirmation
Best used in combination with your execution logic
Summary
MTF Price Line SNIPER transforms raw price into a structured, multi-layered visual system:
Entry timing (M1)
Flow (x5)
Trend (x15)
Context (H1 / H4)
All in one adaptive, customizable overlay. 指标
Reversal SMC/ICT Edition Reversal — SMC/ICT Edition
**Original concept by © HasanRifat — Extended & rebuilt for SMC/ICT confluence trading**
---
### Overview
This is a fully reworked version of HasanRifat's original Reversal indicator, rebuilt from the ground up to address its core structural weaknesses and align with a serious SMC/ICT trading framework. The original logic was sound — but it fired signals without trend context, volume conviction, or session awareness. This version fixes all of that.
The result is a precision **liquidity sweep + displacement detector** that gates every signal through five confluent layers before plotting. Fewer signals. Higher quality.
---
### What The Indicator Actually Detects
The core pattern this indicator hunts is a two-step sequence that SMC/ICT traders will immediately recognise:
**Step 1 — The Sweep**
A candle closes below the lows (or above the highs) of a configurable percentage of recent candles. This is a programmatic representation of a **BSL/SSL liquidity grab** — price reaching down to where stop losses and buy/sell orders are clustered, then preparing to reverse.
**Step 2 — The Reclaim (Confirmation)**
Within a tight confirmation window (default 3 bars), price closes back above the sweep candle's high (bullish) or below its low (bearish). This is the **displacement** — the market maker move away from the liquidity pool. Without this reclaim happening quickly, the setup is invalidated.
This two-step sequence maps directly onto the **sweep → displacement → BOS** structure that underpins ICT-based entry models.
---
### Five-Layer Signal Gate
Every signal must pass all active filters simultaneously before plotting:
**Layer 1 — Flexible Sweep Threshold**
The original indicator required *exactly* `lookback - 1` candles to be swept — a rigid rule that missed perfectly valid setups by one candle. This version uses a percentage-based threshold (default 85%). At lookback 20, this means 17 out of 20 prior candles must have their low (or high) breached. Tighten toward 1.0 for stricter sweeps, loosen toward 0.75 to catch more setups. The threshold is tunable without breaking the logic.
**Layer 2 — HTF Trend Filter**
A higher timeframe EMA (default: 1H, 50 EMA) gates the signal direction. Bullish reversals only fire when HTF close is above the HTF EMA. Bearish reversals only fire when below. Trading reversals against the HTF trend is where the majority of retail losses come from — this filter eliminates that entire category of setups. The HTF EMA is plotted directly on chart as a colour-coded ribbon (green above, red below) so bias is always visually obvious.
**Layer 3 — Volume Displacement Confirmation**
The confirming candle's volume must exceed the 20-bar volume moving average by a configurable multiplier (default 1.2× — 20% above average). A weak, low-volume close back above the sweep candle's high is not a displacement. It's noise. This filter requires the market to show actual conviction on the reclaim bar, consistent with genuine institutional participation.
**Layer 4 — Session Filter**
Signals only fire within a defined session window. Default is `0700–1630 UTC` (London open through New York close). This eliminates Asian session chop, pre-market fakes, and low-liquidity reversals that have no follow-through. The session window is fully customisable in settings.
**Layer 5 — Non-Repainting (Default ON)**
The single most common reason retail traders lose money on reversal indicators is repainting. The original indicator had non-repainting mode *off* by default, meaning backtests looked significantly better than live performance. This version has it **on by default**. All conditions are evaluated on the previous fully closed bar. What you see in history is exactly what would have fired in real time — no exceptions.
---
### Inputs Reference
| Parameter | Default | Description |
|---|---|---|
| Candle Lookback | 20 | Number of prior candles scanned for the sweep |
| Confirm Within | 3 | Max bars allowed for price to reclaim after sweep |
| Sweep Threshold % | 0.85 | % of lookback candles that must be breached |
| Non-Repainting Mode | ✅ ON | Signals based on closed bars only |
| Enable Trend Filter | ✅ ON | Gates signals by HTF EMA direction |
| HTF Timeframe | 60 (1H) | Timeframe for trend EMA calculation |
| Trend EMA Length | 50 | EMA length on HTF for bias determination |
| Enable Volume Filter | ✅ ON | Requires above-average volume on confirmation bar |
| Volume MA Length | 20 | Lookback for volume moving average |
| Min Volume Multiplier | 1.2 | Confirmation bar volume must exceed MA × this value |
| Enable Session Filter | ✅ ON | Restricts signals to defined trading hours |
| Session Window (UTC) | 0700-1630 | Active signal window |
---
### How To Use This In An SMC/ICT Framework
This indicator is designed as a **precision entry trigger**, not a standalone system. It performs best as the final confirmation layer in a structured top-down analysis:
1. **Establish HTF bias** on the 1H chart — is price in a bullish or bearish swing structure? The built-in trend filter enforces this, but your manual HTF read should come first.
2. **Identify premium/discount zones** — only look for bullish signals from discount, bearish from premium. The indicator fires in both directions; your zone analysis determines which signals are tradeable.
3. **Mark key liquidity pools** — EQH/EQL levels where BSL/SSL is resting. The sweep pattern is most powerful when it targets a known liquidity pool, not a random low.
4. **Wait for the signal** — when the lime triangle (bullish) or red triangle (bearish) appears, the sweep + reclaim + volume + trend + session conditions have all been met simultaneously.
5. **Drop to LTF for entry** — use a 1M BOS or CHoCH as final entry trigger. The signal on your execution timeframe marks the area; the 1M structure break marks the precise moment.
6. **Place entry at structure** — Fibonacci retracement of the displacement move, or the 50% of the confirming candle, depending on your model.
---
### What This Indicator Is Not
- It is **not** a complete trading system. No indicator is.
- It does **not** replace HTF structure analysis, premium/discount identification, or liquidity mapping.
- It does **not** account for high-impact news events. Manage your own news calendar.
- It will **not** fire on every valid setup — the five-layer gate is intentional. Missing a signal is better than taking a bad one.
---
### Alerts
Two alert conditions are included:
- `Bullish Reversal ` — fires when all bullish conditions are met
- `Bearish Reversal ` — fires when all bearish conditions are met
Set alerts on **Once Per Bar Close** to remain consistent with non-repainting mode.
---
### Credits
Core sweep detection logic based on the original **Reversal** indicator by © HasanRifat. Extended with trend, volume, session filtering and non-repainting defaults for professional SMC/ICT application.
---
*This indicator is a tool for analysis. All trading decisions remain your own responsibility. Past signal performance does not guarantee future results.*
指标
指标
指标
策略
指标
指标
XAUUSD Zone Sniper v1XAUUSD Zone Sniper is an intraday liquidity-based indicator built for gold traders who want a more structured way to read sweep-and-reversal conditions on lower timeframes. The script is designed for XAUUSD and overlays the chart with key liquidity levels, displacement events, and actionable reaction zones derived from post-sweep price behavior.
The indicator uses a multi-factor workflow instead of a single trigger. First, it builds a directional bias using a combination of EMA alignment, EMA slope, and recent swing structure. It then tracks key reference levels such as Asia session high/low, previous day high/low, recent swing liquidity, and nearby round numbers. When price wicks through one of those levels and closes back inside, the event is treated as a potential liquidity sweep.
After a sweep, the script looks for displacement. In this context, displacement is defined as a strong impulsive candle with a minimum body-to-range ratio and a minimum expansion versus ATR. If displacement occurs within a short window after the sweep, the script can mark a potential reaction area using either a Fair Value Gap, an Order Block, or both, depending on the selected settings.
Each zone is then scored using several contextual factors. The score can include liquidity quality, displacement, inefficiency, session timing, higher-timeframe bias alignment, and retest confirmation, while poor context such as dead-session conditions can reduce quality. This allows the indicator to separate weaker candidates from stronger A and A+ setups instead of plotting every possible zone equally.
The script also includes a zone state model. A newly created zone starts as a candidate, can later become armed after a valid retest, and is eventually marked as mitigated or no longer relevant if price trades too deeply into it, closes beyond it, or enough bars pass without confirmation. This helps reduce chart clutter and keeps the focus on fresh areas.
What you see on the chart:
- EMA fast, EMA slow, and HTF EMA for bias context
- Asia high/low, previous day high/low, and nearby round numbers
- Sweep markers when liquidity is taken above or below key levels
- Displacement arrows after valid sweep reactions
- Bullish and bearish zones drawn as boxes
- Optional score labels showing setup quality and class
Suggested use:
- Best suited to XAUUSD intraday charts
- Typically most relevant on lower timeframes such as M1 to M15
- Can be used to frame reaction trades after a liquidity event rather than to predict price in advance
- Stronger signals generally occur when a sweep, displacement, session timing, and directional bias align together
Important notes:
- This script is a decision-support tool, not a fully autonomous trading system
- Zones are context-dependent and should be evaluated together with execution, risk management, and nearby targets/liquidity
- Session filters and scoring thresholds can materially change how selective the script becomes
- The default settings are optimized for a liquidity/reaction style workflow on gold, but users may still need to tune them to their broker feed and timeframe
Main inputs:
- HTF Bias: EMA fast/slow/HTF, structure lookback, slope length
- Key Levels: Asia range, previous day high/low, round number logic, swing lookback
- Sweep Detection: tolerance and wick quality filters
- Displacement: body/range threshold, ATR expansion, ATR length
- Zone Logic: FVG / OB / Both
- Scoring: minimum score to draw, alert thresholds, class thresholds, factor weights
- Zone Management: max active zones, expiry bars, mitigation depth, minimum R:R filter
- Alerts: armed bull/bear zones, sweeps, and displacement events
This indicator is for educational and analytical purposes only. It does not guarantee future performance, and all trading decisions remain the responsibility of the user. 指标
策略
指标
Conflux Engine | AnonycryptousConflux Engine | Anonycryptous
Description & user manual
Why this indicator is different?
Most signal indicators work the same way. One condition triggers. One signal fires. The trader either takes it or does not.
The problem is that a single condition — a crossover, a level break, a momentum read — is almost never enough to define a genuinely high-quality trade. Markets are too complex and too noisy for that.
Conflux Engine works differently.
It does not fire on one condition. It requires multiple independent market forces to align simultaneously before a signal appears. Structure has to agree. Volume has to confirm. Momentum has to support. Volatility has to be in the right zone. Session positioning has to be favorable. And optionally, the higher timeframe trend and the ribbon have to be aligned too.
Only when enough of these forces agree — and agree clearly — does the indicator produce a signal.
This is what confluence means in practice. Not one thing being right. Multiple independent things being right at the same time.
The result is fewer signals. But the signals that do appear carry more weight than anything a single-condition system can produce.
Important notice
Conflux Engine generates trading signals based on a multi-factor scoring engine.
These signals are not financial advice.
They do not predict the future.
They do not guarantee profitability.
They are a systematic read of current market conditions across multiple dimensions.
All trading decisions are made entirely by the user.
Always manage your own risk. Always apply your own judgment.
1. Overview
Conflux Engine is a scoring-based signal indicator for traders who want structured, high-conviction entries rather than frequent, noisy ones.
Six independent pillars evaluate the market continuously. Each pillar scores independently. The scores combine into a total out of 100. When the total exceeds the signal threshold — and the dominant direction leads the opposite direction by a minimum gap — a signal fires.
Additional hard gates can be enabled: an ADX noise filter to block signals during choppy markets, a VWMA filter to ensure macro trend alignment, a Supertrend filter for dynamic trend confirmation, and an Ultra Ribbon filter using 15 Hull Moving Averages for the fastest momentum read.
The result is an indicator that is selective by design. It is not built to fire constantly. It is built to fire well.
2. The six pillars
2.1 Structure
Evaluates market structure using swing pivot highs and lows. A higher high combined with a higher low defines a bullish structure. A lower high combined with a lower low defines a bearish structure.
This pillar answers the most fundamental question in trading: is the market making progress in a direction, or is it deteriorating?
Weight: up to 16 points.
2.2 Volume
Uses OBV slope via linear regression to determine whether volume is accumulating in the direction of price or diverging from it.
Rising OBV slope on a bullish signal means participation supports the move. Falling OBV slope on a bullish signal is a warning. This pillar separates moves with institutional backing from moves without it.
Weight: up to 16 points.
2.3 Momentum
Evaluates three independent momentum reads: KAMA position (a Kaufman adaptive moving average that adjusts its speed to market conditions), RSI relative to the 50 midline with slope direction, and Williams %R for price positioning within the recent range.
Two of three aligned scores partial points. All three aligned scores full points.
Weight: up to 16 points.
2.4 Liquidity
Detects sweep events — moments where price wicks beyond a recent swing high or low and closes back inside. These events mark liquidity grabs and often precede directional moves.
A confirmed bull sweep sets up a long bias context. A confirmed bear sweep sets up a short bias context. The context remains active for a configurable number of bars, decaying over time.
Weight: up to 16 points.
2.5 Volatility
Measures ATR relative to its own moving average to identify the volatility sweet spot. Signals during dead, flat markets carry less meaning. Signals during chaotically explosive moves are harder to execute cleanly. This pillar rewards the in-between: active, directional, manageable volatility.
Weight: up to 16 points.
2.6 Session
Evaluates price positioning within the current day's developing range. Price in the lower portion of the range (discount) favors long bias. Price in the upper portion (premium) favors short bias.
This pillar can be toggled independently from the session time filter — you can use session scoring without restricting signals to specific hours, or vice versa.
Weight: up to 20 points.
3. Hard gates
Beyond the six scoring pillars, Conflux Engine includes four optional hard gates. These do not add points. They block signals entirely when their condition is not met.
3.1 ADX noise filter
Blocks signals when ADX is below a configurable threshold. ADX measures trend strength. A low ADX means the market is ranging and directionless — exactly the environment where momentum signals fail most often. Default threshold: 35. Adjustable up to 100 for maximum selectivity.
3.2 VWMA filter
Price must be above the Volume Weighted Moving Average for long signals, and below it for short signals. The VWMA is slower than a standard EMA and reflects the average price weighted by volume — a more meaningful macro reference than a simple average. Default length: 200.
3.3 Supertrend filter
The Supertrend must confirm the signal direction. This is a dynamic trend line based on ATR bands that flips cleanly between bull and bear states. It acts as an additional structural confirmation that the trend environment supports the entry.
3.4 Ultra Ribbon filter
The fastest gate. Built from 15 Hull Moving Averages spanning a range of lengths. When the fastest HMA is above the slowest HMA, the ribbon is bullish. When below, bearish. Because Hull MAs minimize lag, this gate reacts to trend changes earlier than most moving average systems.
The ribbon also serves as a trailing stop option in the backtest — the slowest HMA tracks trend without being too reactive.
4. Signal scoring
Every bar, both a bullish and bearish score are computed from the six pillars. The scores are added together.
A signal fires when:
- The dominant score meets or exceeds the signal threshold (default 70)
- The dominant score exceeds the opposite score by at least the directional lead (default 20)
- All enabled hard gates are cleared
This two-condition check — threshold plus gap — prevents marginal signals from appearing when the market is ambiguous. Both bull and bear can score reasonably high during mixed conditions. The gap requirement ensures the dominant direction is meaningfully ahead.
Pillar weights are individually adjustable. The system allows traders to prioritize the factors most relevant to their trading style and instrument.
The Extreme Threshold (default 90) flags signals where the confluence score is exceptionally high. These are the highest-conviction setups in the system.
5. The Ultra Ribbon
The Ultra Ribbon is a 15-layer Hull Moving Average ribbon that sits on the chart as both a visual trend tool and a momentum gate. Three themes are available:
Classic — green and red. Clear, functional, no ambiguity.
Phantom — cyan and pink with purple exhaustion. A darker, stylized read of the same data. (the default)
Custom — full color control for bull, bear, and exhaustion states.
The ribbon color adapts dynamically. When the spread between the fastest and slowest HMA is wide relative to its historical average, the ribbon fades toward the exhaustion color — a visual signal that the trend may be overextended. When the spread is moderate, the ribbon shows its full trend color.
Candle coloring follows the ribbon's bull/bear state continuously, giving an immediate read of trend direction on every bar.
The dashboard accent color and signal indicators follow the active theme, giving the entire indicator a unified visual identity across chart and panel.
6. Multi-timeframe filter
When enabled, the MTF filter evaluates the trend on a higher timeframe using a 50-period EMA. If the higher timeframe trend agrees with the signal direction, a weight bonus is added to the total score. If it disagrees, no bonus is added — but the signal is not blocked unless the score falls below threshold as a result.
This behavior is intentional. The HTF filter adds weight to aligned signals without making every counter-trend setup impossible. It rewards confluence with the bigger picture without enforcing hard alignment.
Default timeframe: 240 (4-hour).
Default weight bonus: 20 points.
7. Backtest and performance tracking
Confluence Engine includes a built-in performance tracker that logs every signal, applies configurable stop and target multipliers based on the current regime, and tracks wins, losses, and win rate across the visible history.
Stop loss modes:
- ATR — a fixed multiple of ATR from the entry price. Simple and consistent.
- Pivot — stop placed at the most recent swing low (for longs) or swing high (for shorts). Respects structure.
- Supertrend — stop placed at the dynamic Supertrend level at the time of entry. Tighter and adaptive.
- Trailing (h15) — stop follows the slowest HMA of the Ultra Ribbon. Trends with the market and gives winners more room.
Target multipliers are adjustable for each regime: Scalp, Intraday, and Swing. The regime is determined by the current ADX value.
Recent log shows the last three trade results in R multiples. This gives a quick read on recent system performance without requiring a separate journaling tool.
Note: the backtest uses bar close logic and approximated fill prices. It is a directional performance reference, not a precise simulation. Session filtering does not retroactively apply to historical trades — enabling session filtering after a test period will affect forward signals but not past performance data.
8. Dashboard reference
The dashboard updates on every bar and shows:
- Header: indicator name and current timeframe
- Pillar rows 1–6: score per pillar, colored by direction
- HTF Trend: higher timeframe alignment and weight (when MTF enabled)
- Signal: LONG / SHORT / WAIT with direction color
- Win Rate: percentage of tracked signals that hit target
- Recent Log: last three results in R multiples
- Score: total confluence score out of 100
- Session: OPEN or FILTERED
The dashboard header and accent colors follow the active ribbon theme.
Tiny, Small, and Normal size options are available.
9. Settings reference
General Settings
- Signal Threshold: minimum score to trigger a signal (50–95, default 70)
- Extreme Threshold: score above which extreme confluence is flagged (80–100, default 90)
- Directional Lead: minimum gap between bull and bear score (default 20)
Multi-Timeframe Trend
- Enable MTF Filter
- HTF Timeframe (default 240)
- HTF Weight (default 20)
Quality Filters (Noise Reduction)
- Enable ADX Noise Filter
- Min ADX Value (0–100, default 35)
Trend Confirmation
- Enable VWMA Filter + length
- Enable Supertrend Filter + ATR length + multiplier
- Show/hide Supertrend and VWMA lines
Pillar Weights
- Individual weight for each of the six pillars
Session Filtering
- Filter Entries by Session (time gate)
- Enable Session Pillar Scoring (premium/discount scoring)
- Trading Session input
Trade Suggestions (ATR Multipliers)
- SL and TP multipliers for Scalp, Intraday, and Swing regimes
Ultra Ribbon
- Enable Ribbon Filter
- Show Ribbon on Chart
- Base Length and Length Step
- Theme: Classic / Phantom / Custom
- Custom color inputs (bull, bear, elite)
Backtest & UI
- Enable Performance Tracking
- Start Year
- Show Active Trade Lines
- Show Recent Trade Log
- Stop Loss Mode: ATR / Pivot / Supertrend / Trailing (h15)
UI Settings
- Show Dashboard
- Dashboard Position
- Dashboard Size: Tiny / Small / Normal
10. How to use
10.1 Initial setup
1. Load the indicator on your preferred chart and timeframe.
2. Select a ribbon theme that matches your visual preference.
3. Set the signal threshold based on your desired selectivity. Start at 70.
4. Set the directional lead. 15–20 is a balanced starting point.
5. Enable the hard gates relevant to your style. For intraday trading, ADX + Supertrend is a strong combination. For swing trading, VWMA + MTF adds macro context.
6. Configure the session scoring if you trade specific sessions. NY traders: set session to 1330–2000 UTC (or your local equivalent).
7. Set your backtest start year and stop mode preference.
10.2 Reading a signal
When a signal appears:
- Check the dashboard. Which pillars are active? A signal with Structure + Volume + Momentum all scoring is stronger than one carried primarily by Session and Volatility.
- Check the score. A signal at 72 with a 20-point gap is valid but tight. A signal at 88 with a 30-point gap is a high-conviction setup.
- Check the ribbon. Is it cleanly bullish or bearish? Is it near exhaustion color? Signals during ribbon exhaustion carry more risk.
- Check the hard gates. They cleared — but were they close? A signal that barely cleared ADX 35 is different from one with ADX at 55.
10.3 Managing entries
Confluence Engine does not tell you the exact entry price. It tells you when conditions align. Your entry technique — pullback, breakout, limit at structure — remains your decision.
Use the stop mode that fits your trade: ATR for consistency, Pivot for structure-respect, Supertrend for dynamic adaptation, Trailing h15 for trend trades you want to hold.
10.4 Interpreting win rate
The built-in win rate is a useful reference, not a guarantee of future performance. A 65% win rate over 50 signals on a specific asset and timeframe tells you the system has been profitable in that environment. It does not guarantee the next signal wins.
Win rate should always be evaluated alongside average RR. A 60% win rate at 2R average beats a 70% win rate at 0.8R average. Use the recent log and the trade lines together to assess both dimensions.
10.5 Optimizing settings
If you see too many signals: raise the threshold, raise the directional lead, raise the ADX minimum, or enable additional hard gates.
If you see too few signals: lower the threshold slightly, reduce the directional lead, or disable one or two hard gates.
Do not optimize purely for win rate without considering signal frequency. A system that fires once per week at 80% win rate is different in practice from one that fires daily at 65%. Both can be profitable. Choose what fits your trading style.
11. Timeframe guide
1m–5m — Ultra Ribbon filter on, ADX threshold 30–40, Supertrend on, session scoring on. Focus on fast momentum signals during active sessions.
15m–30m — Full filter stack recommended. Threshold 70–75. Strong balance of frequency and quality.
1H–4H — VWMA and MTF filter add significant value. Threshold 75–80. Fewer signals, higher conviction.
Daily — Disable session scoring. Enable VWMA and MTF only. Use as swing context, not scalp tool.
12. What this indicator does not do
- Does not predict price direction with certainty
- Does not guarantee profitability
- Does not replace your own risk management
- Does not account for news events, gaps, or liquidity voids
- Does not track open positions in real time
- Does not connect to any broker or execution system
- Does not replace the Risk Management Engine for position sizing and account compliance
For position sizing, drawdown compliance, and trade logging, pair with Risk Management Engine | Anonycryptous.
For complete session analysis and market context, pair with Environment | Anonycryptous.
Together, the three tools cover strategy context, signal generation, and risk execution — a complete framework for structured trading.
13. Disclaimer
This indicator is provided for educational and informational purposes only. Nothing in this document constitutes financial advice or any form of recommendation.
All trading decisions are made entirely by the user. The indicator provides signal analysis based on configurable parameters — the relevance of any output depends on how those parameters are set and the market conditions in which the indicator is used.
Trading financial instruments involves substantial risk of loss. Past performance of the backtest function is not indicative of future results. You may lose all of your invested capital.
Anonycryptous accepts no responsibility or liability for any losses incurred as a result of using this indicator or any content in this manual.
指标
指标
NASDAQ Flow Profile PRO CLEAN MTF + LTFThis indicator delivers a multi-timeframe volume-weighted flow profile designed specifically for fast markets like NASDAQ. It combines Main TF, Higher Timeframes (HTF), and Lower Timeframe (LTF) structure into a single, clean visual framework — without repainting or external data requests.
🔍 Core Concept
Instead of using traditional fixed volume profile tools, this script dynamically calculates:
POC (Point of Control) → volume-weighted average price
VAH (Value Area High) → upper deviation from POC
VAL (Value Area Low) → lower deviation from POC
All levels are derived using:
Pure price × volume weighting
Rolling lookback windows
Standard deviation–based value areas
This creates a live, adaptive flow profile that reacts instantly to market conditions.
⚙️ Multi-Timeframe Engine
🟡 Main Timeframe (Chart TF)
Core structure of the current market
Smoothed using EMA for clarity
Defines the active trading range
🟠 HTF x5 (Higher Timeframe)
Mid-term directional bias
Filters noise and highlights institutional flow zones
🔵 HTF x15 (Higher Timeframe)
Macro structure
Identifies major accumulation/distribution areas
All HTF levels are calculated internally using length multiplication, not request.security, ensuring:
No repainting
Perfect alignment with the current chart
⚡ LTF Precision Layer
⚪ Lower Timeframe (LTF)
Ultra-fast microstructure detection
Uses reduced lookback + tighter value area (ltfTight)
Ideal for:
Entries
Scalping confirmation
Fine-tuning execution
🎯 Key Features
✅ True volume-weighted POC calculation (not approximated)
✅ Dynamic Value Areas using variance & standard deviation
✅ Full MTF stacking (x1 / x5 / x15)
✅ Integrated LTF microstructure layer
✅ Independent visibility toggles for all components
✅ Clean EMA smoothing (no lag-heavy filters)
✅ Fully customizable colors
✅ Overlay directly on price chart
🚀 What’s Improved vs. Standard / Original Versions
🔥 Added LTF Layer
→ Most flow/profile indicators only show HTF bias.
→ This version adds a true lower timeframe execution layer.
🔥 No request.security Usage
→ Eliminates repainting and sync issues
→ Uses mathematical TF projection (length scaling) instead
🔥 Cleaner Visualization
→ Removed unsupported dashed styles
→ Replaced with transparency-based hierarchy
🔥 Optimized for NASDAQ
→ Faster reaction via shorter default lookback
→ Better suited for M1 / M5 scalping
🔥 More Accurate VA Calculation
→ Uses volume-weighted variance, not simple price deviation
🔥 Performance Optimized
→ Lightweight loops
→ No external data calls
→ Stable even on low timeframes
🧠 How to Use
Price above POC → bullish control
Price below POC → bearish control
VAH = potential resistance
VAL = potential support
Best Confluence:
LTF aligns with HTF direction → high-probability entry
Price reacts at HTF VA zones → institutional levels
Compression between VAH/VAL → breakout potential
🏁 Summary
This is not a classic volume profile.
It’s a real-time flow engine that maps:
Microstructure (LTF)
Current structure (Main TF)
Macro bias (HTF)
All in one — clean, fast, and built for precision trading. 指标
Normalized Momentum Indicator Description:
This indicator is designed to help traders identify market structure, trend direction, volatility conditions, and potential reversal zones. It combines price‑action logic with dynamic calculations to highlight key areas of interest and improve decision‑making across different timeframes.
The tool automatically analyzes recent price behavior and visualizes important signals such as trend shifts, momentum changes, breakout conditions, and support/resistance reactions. It can be used for scalping, intraday trading, swing trading, or long‑term analysis.
Key Features:
Detects trend direction and potential trend reversals
Highlights important support and resistance zones
Identifies momentum strength and volatility changes
Works on all markets (Forex, Crypto, Stocks, Indices, Commodities)
Fully customizable parameters for fine‑tuning
Suitable for beginners and advanced traders
Helps filter noise and improve entry/exit timing
How to Use:
Look for confluence between trend direction, momentum, and price reaction
Use signals as confirmation, not as a standalone entry trigger
Combine with volume, market structure, or higher‑timeframe analysis
Adjust sensitivity based on your trading style 指标
