Aktualisiert
Smart Money Engine [WillyAlgoTrader]
Smart Money Engine (SME) is a comprehensive overlay indicator that automates the core elements of Smart Money Concepts (SMC) analysis: multi-layer market structure detection (BOS / CHoCH), order block identification with strength grading, fair value gap tracking with fill monitoring, inverse FVG generation, and auto-anchored Fibonacci retracement — all in a single, unified tool.
Rather than stacking five separate indicators on your chart — one for structure, one for OBs, one for FVGs, one for IFVGs, and one for Fibonacci — SME integrates these components so they share a common structural context. Order blocks are created at actual structure break points, FVGs are filtered against volatility, IFVGs are born from filled FVGs, and the Fibonacci grid automatically anchors to the current strong high and strong low. Every component is aware of the others, producing a cleaner and more logically consistent chart than layering independent tools.
🔍 WHAT MAKES IT ORIGINAL
1. Dual-layer structure detection (Swing + Internal). The indicator runs two independent pivot-based structure engines simultaneously. The Swing layer (configurable length, default 10) captures major market structure — the higher-timeframe trend. The Internal layer (shorter length, default 5) captures minor structure shifts within the swing trend. Both label BOS (Break of Structure — continuation) and CHoCH (Change of Character — reversal) independently. This dual-layer approach lets you see whether an internal CHoCH is happening against or with the swing trend — a key distinction in SMC methodology that single-layer tools miss.
2. Order Blocks with contextual grading (A / B / C). OBs are not placed at arbitrary candles. They are created only when a swing-level BOS or CHoCH occurs — the script walks back from the break to find the last opposite-colored candle (the institutional candle that initiated the move). Each OB is then graded:
— Grade A: OB overlaps with an FVG and has a volume spike (highest confluence)
— Grade B: OB has one confluence factor (volume spike OR FVG overlap)
— Grade C: basic OB without additional confluence
Grading helps you prioritize which zones to trade from. OBs extend until mitigated (user choice: close-based or wick-based mitigation), and each OB displays a Consequent Encroachment (CE) midline — the 50% level that often acts as the reaction point within the block.
3. Fair Value Gaps with ATR auto-filter and fill tracking. FVGs are detected using the classic three-candle gap method (current low > high two bars ago for bullish, inverse for bearish). A built-in ATR filter (enabled by default) suppresses FVGs smaller than 0.5× ATR, removing the micro-gaps that clutter charts on lower timeframes. Each FVG extends until fully filled, displays a CE midline, and is automatically removed once price closes through the gap.
4. Inverse FVG (IFVG) generation. When an FVG is fully filled by price, it doesn't just disappear — it transforms into an Inverse FVG with flipped bias. A filled bullish FVG becomes a bearish IFVG (potential resistance); a filled bearish FVG becomes a bullish IFVG (potential support). This captures the SMC concept that once institutional imbalance is filled, the zone can flip polarity. IFVGs are displayed with distinct dashed borders and tracked until mitigated by a close through their zone.
5. Auto-anchored Fibonacci retracement. The Fibonacci grid automatically spans from the current Strong High to Strong Low — the trailing extremes of the active swing structure. When a new BOS/CHoCH shifts the structure, the anchor points update and the grid repositions. The OTE (Optimal Trade Entry) zone between 0.5 and 0.618 is highlighted, giving you an immediate visual reference for the premium/discount equilibrium.
6. Strong / Weak High and Low levels. After each structural break, the indicator identifies the trailing high and low as either "Strong" or "Weak" based on their position relative to the current trend direction. In a bullish swing, the low that initiated the trend is the Strong Low (protected) and the high is the Weak High (target). These levels are extended forward as dashed lines, providing clear reference for where the trend is protected and where it is vulnerable.
⚙️ HOW IT WORKS
Structure detection:
Swing pivots are identified using ta.pivothigh() and ta.pivotlow() with the configured lookback length. The script maintains the most recent swing high and swing low. When price closes above the previous swing high (confirmed bar close, no mid-bar signals), it registers a bullish break. If the prior trend was bearish, this is labeled CHoCH (reversal); if bullish, it is labeled BOS (continuation). The same logic applies in reverse for bearish breaks. Internal structure uses an identical algorithm with a shorter lookback, and its labels are drawn with dashed lines and lighter opacity to visually distinguish them from swing-level events.
Order Block detection:
When a swing-level break is confirmed, the script scans backward (up to 30 bars) from the pivot that was broken to find the last candle with opposite polarity — the candle whose body direction opposes the break direction. The full range (high to low) of that candle becomes the OB zone. A volume spike check (volume > 1.5× 20-period SMA) adds confluence for grading. OBs extend right until the mitigation condition is met.
FVG detection:
On every confirmed bar, the script checks whether the current bar's low exceeds the high of two bars ago (bullish FVG) or the current high is below the low of two bars ago (bearish FVG). If the gap size passes the ATR filter, an FVG box is created. The box extends right each bar. If price fills the gap completely (low touches the bottom of a bullish FVG, or high touches the top of a bearish FVG), the FVG is removed and — if IFVG mode is enabled — queued for conversion to an Inverse FVG.
HTF trend filter:
An optional higher-timeframe EMA(50) filter provides directional bias. The HTF data is fetched using request.security() with confirmed-bar referencing ([1] + lookahead_on pattern) to prevent repainting. When enabled, the dashboard displays the HTF bias, and the confluence can factor into OB grading.
Anti-repaint compliance:
All structure breaks, OB creation, and FVG detection require barstate.isconfirmed — signals fire only after the bar closes. The HTF filter uses the standard non-repainting security call pattern. No future data is accessed.
📖 HOW TO USE
Reading the chart:
— HH / HL / LH / LL labels at swing points classify the market structure
— Solid horizontal lines with BOS or CHoCH labels = swing-level structure breaks
— Dashed lines with BOS/CHoCH = internal (minor) structure breaks
— Colored boxes = Order Blocks (green-tinted = bullish, red-tinted = bearish)
— Letter labels (A/B/C) on OBs = strength grade
— Dotted midline inside OBs = Consequent Encroachment (CE)
— Blue-tinted boxes = bullish FVGs; orange-tinted = bearish FVGs
— Dashed-border boxes labeled IFVG = Inverse Fair Value Gaps
— Dotted horizontal Fibonacci lines with OTE zone highlight = auto retracement grid
— Dashed trailing lines labeled "Strong High/Low" or "Weak High/Low" = structural extremes
Suggested workflow:
— Identify the swing trend direction from BOS/CHoCH labels and Strong/Weak levels
— Check if internal structure aligns with or diverges from swing structure
— Look for entry opportunities at Order Blocks (prioritize Grade A/B) within the Fibonacci OTE zone
— Use FVGs as additional confluence — a bullish OB that overlaps a bullish FVG is a higher-probability zone
— Monitor IFVGs for polarity-flipped zones that may act as new support/resistance
— Use the dashboard to track active OB/FVG/IFVG counts and HTF bias alignment
Timeframe guidance:
— Scalping (1–5min): Swing Length 5–7, Internal 3, increase Max OBs/FVGs for more zones
— Intraday (15min–1H): Swing Length 8–12, Internal 5, default settings work well
— Swing (4H–Daily): Swing Length 15–25, Internal 7–10, reduce Max OBs to keep chart clean
— Use the HTF filter with 1 step up (e.g. 1H chart → 4H HTF, 4H chart → D HTF)
⚙️ KEY SETTINGS REFERENCE
— Swing Detection Length (default 10): lookback for major structure pivots
— Internal Structure Length (default 5): lookback for minor structure pivots (should be < Swing Length)
— OB Mitigation (default Wick): "Close" = OB removed on close through zone; "Wick" = removed on any touch
— Show OB Grade (default On): display A/B/C strength classification on OBs
— Show OB Midline (default On): display CE (50%) line inside order blocks
— Auto-Filter Small FVGs (default On): suppress FVGs smaller than 0.5× ATR
— Max Visible OBs / FVGs / IFVGs (default 5 each): cap on displayed zones to manage chart clutter
— Show Inverse FVGs (default Off): enable IFVG generation from filled FVGs
— Show Fibonacci Retracement (default On): auto-anchored grid with OTE zone highlight
— HTF Trend Filter (default Off): set a higher timeframe for directional bias via EMA(50)
— Volume Confirmation (default On): add confluence when volume > 1.5× average (auto-disabled on forex)
📊 Dashboard
The info panel (adjustable to any chart corner) displays in real time:
— Swing trend direction (Bullish / Bearish)
— Internal trend direction
— Fibonacci range (Strong High — Strong Low)
— Count of active OBs, FVGs, and IFVGs
— HTF bias (if enabled)
— Current timeframe and indicator version
⚠️ IMPORTANT NOTES
— This indicator does not repaint. All signals and zone creations require bar-close confirmation. The HTF filter uses the standard [1] + lookahead_on non-repainting pattern.
— SME is a structural analysis and zone-mapping tool — it identifies where institutional activity likely occurred, but it does not generate explicit buy/sell signals. Trade decisions should incorporate your own entry triggers, risk management, and additional confluence.
— Past structure patterns and zone reactions do not guarantee future price behavior.
— Performance may vary across instruments and timeframes. Lower timeframes produce more zones and structure shifts; use the ATR filter and Max Visible caps to manage noise.
— The indicator works across all asset classes. Volume-based features (OB grading) are automatically adjusted on instruments without volume data.
Rather than stacking five separate indicators on your chart — one for structure, one for OBs, one for FVGs, one for IFVGs, and one for Fibonacci — SME integrates these components so they share a common structural context. Order blocks are created at actual structure break points, FVGs are filtered against volatility, IFVGs are born from filled FVGs, and the Fibonacci grid automatically anchors to the current strong high and strong low. Every component is aware of the others, producing a cleaner and more logically consistent chart than layering independent tools.
🔍 WHAT MAKES IT ORIGINAL
1. Dual-layer structure detection (Swing + Internal). The indicator runs two independent pivot-based structure engines simultaneously. The Swing layer (configurable length, default 10) captures major market structure — the higher-timeframe trend. The Internal layer (shorter length, default 5) captures minor structure shifts within the swing trend. Both label BOS (Break of Structure — continuation) and CHoCH (Change of Character — reversal) independently. This dual-layer approach lets you see whether an internal CHoCH is happening against or with the swing trend — a key distinction in SMC methodology that single-layer tools miss.
2. Order Blocks with contextual grading (A / B / C). OBs are not placed at arbitrary candles. They are created only when a swing-level BOS or CHoCH occurs — the script walks back from the break to find the last opposite-colored candle (the institutional candle that initiated the move). Each OB is then graded:
— Grade A: OB overlaps with an FVG and has a volume spike (highest confluence)
— Grade B: OB has one confluence factor (volume spike OR FVG overlap)
— Grade C: basic OB without additional confluence
Grading helps you prioritize which zones to trade from. OBs extend until mitigated (user choice: close-based or wick-based mitigation), and each OB displays a Consequent Encroachment (CE) midline — the 50% level that often acts as the reaction point within the block.
3. Fair Value Gaps with ATR auto-filter and fill tracking. FVGs are detected using the classic three-candle gap method (current low > high two bars ago for bullish, inverse for bearish). A built-in ATR filter (enabled by default) suppresses FVGs smaller than 0.5× ATR, removing the micro-gaps that clutter charts on lower timeframes. Each FVG extends until fully filled, displays a CE midline, and is automatically removed once price closes through the gap.
4. Inverse FVG (IFVG) generation. When an FVG is fully filled by price, it doesn't just disappear — it transforms into an Inverse FVG with flipped bias. A filled bullish FVG becomes a bearish IFVG (potential resistance); a filled bearish FVG becomes a bullish IFVG (potential support). This captures the SMC concept that once institutional imbalance is filled, the zone can flip polarity. IFVGs are displayed with distinct dashed borders and tracked until mitigated by a close through their zone.
5. Auto-anchored Fibonacci retracement. The Fibonacci grid automatically spans from the current Strong High to Strong Low — the trailing extremes of the active swing structure. When a new BOS/CHoCH shifts the structure, the anchor points update and the grid repositions. The OTE (Optimal Trade Entry) zone between 0.5 and 0.618 is highlighted, giving you an immediate visual reference for the premium/discount equilibrium.
6. Strong / Weak High and Low levels. After each structural break, the indicator identifies the trailing high and low as either "Strong" or "Weak" based on their position relative to the current trend direction. In a bullish swing, the low that initiated the trend is the Strong Low (protected) and the high is the Weak High (target). These levels are extended forward as dashed lines, providing clear reference for where the trend is protected and where it is vulnerable.
⚙️ HOW IT WORKS
Structure detection:
Swing pivots are identified using ta.pivothigh() and ta.pivotlow() with the configured lookback length. The script maintains the most recent swing high and swing low. When price closes above the previous swing high (confirmed bar close, no mid-bar signals), it registers a bullish break. If the prior trend was bearish, this is labeled CHoCH (reversal); if bullish, it is labeled BOS (continuation). The same logic applies in reverse for bearish breaks. Internal structure uses an identical algorithm with a shorter lookback, and its labels are drawn with dashed lines and lighter opacity to visually distinguish them from swing-level events.
Order Block detection:
When a swing-level break is confirmed, the script scans backward (up to 30 bars) from the pivot that was broken to find the last candle with opposite polarity — the candle whose body direction opposes the break direction. The full range (high to low) of that candle becomes the OB zone. A volume spike check (volume > 1.5× 20-period SMA) adds confluence for grading. OBs extend right until the mitigation condition is met.
FVG detection:
On every confirmed bar, the script checks whether the current bar's low exceeds the high of two bars ago (bullish FVG) or the current high is below the low of two bars ago (bearish FVG). If the gap size passes the ATR filter, an FVG box is created. The box extends right each bar. If price fills the gap completely (low touches the bottom of a bullish FVG, or high touches the top of a bearish FVG), the FVG is removed and — if IFVG mode is enabled — queued for conversion to an Inverse FVG.
HTF trend filter:
An optional higher-timeframe EMA(50) filter provides directional bias. The HTF data is fetched using request.security() with confirmed-bar referencing ([1] + lookahead_on pattern) to prevent repainting. When enabled, the dashboard displays the HTF bias, and the confluence can factor into OB grading.
Anti-repaint compliance:
All structure breaks, OB creation, and FVG detection require barstate.isconfirmed — signals fire only after the bar closes. The HTF filter uses the standard non-repainting security call pattern. No future data is accessed.
📖 HOW TO USE
Reading the chart:
— HH / HL / LH / LL labels at swing points classify the market structure
— Solid horizontal lines with BOS or CHoCH labels = swing-level structure breaks
— Dashed lines with BOS/CHoCH = internal (minor) structure breaks
— Colored boxes = Order Blocks (green-tinted = bullish, red-tinted = bearish)
— Letter labels (A/B/C) on OBs = strength grade
— Dotted midline inside OBs = Consequent Encroachment (CE)
— Blue-tinted boxes = bullish FVGs; orange-tinted = bearish FVGs
— Dashed-border boxes labeled IFVG = Inverse Fair Value Gaps
— Dotted horizontal Fibonacci lines with OTE zone highlight = auto retracement grid
— Dashed trailing lines labeled "Strong High/Low" or "Weak High/Low" = structural extremes
Suggested workflow:
— Identify the swing trend direction from BOS/CHoCH labels and Strong/Weak levels
— Check if internal structure aligns with or diverges from swing structure
— Look for entry opportunities at Order Blocks (prioritize Grade A/B) within the Fibonacci OTE zone
— Use FVGs as additional confluence — a bullish OB that overlaps a bullish FVG is a higher-probability zone
— Monitor IFVGs for polarity-flipped zones that may act as new support/resistance
— Use the dashboard to track active OB/FVG/IFVG counts and HTF bias alignment
Timeframe guidance:
— Scalping (1–5min): Swing Length 5–7, Internal 3, increase Max OBs/FVGs for more zones
— Intraday (15min–1H): Swing Length 8–12, Internal 5, default settings work well
— Swing (4H–Daily): Swing Length 15–25, Internal 7–10, reduce Max OBs to keep chart clean
— Use the HTF filter with 1 step up (e.g. 1H chart → 4H HTF, 4H chart → D HTF)
⚙️ KEY SETTINGS REFERENCE
— Swing Detection Length (default 10): lookback for major structure pivots
— Internal Structure Length (default 5): lookback for minor structure pivots (should be < Swing Length)
— OB Mitigation (default Wick): "Close" = OB removed on close through zone; "Wick" = removed on any touch
— Show OB Grade (default On): display A/B/C strength classification on OBs
— Show OB Midline (default On): display CE (50%) line inside order blocks
— Auto-Filter Small FVGs (default On): suppress FVGs smaller than 0.5× ATR
— Max Visible OBs / FVGs / IFVGs (default 5 each): cap on displayed zones to manage chart clutter
— Show Inverse FVGs (default Off): enable IFVG generation from filled FVGs
— Show Fibonacci Retracement (default On): auto-anchored grid with OTE zone highlight
— HTF Trend Filter (default Off): set a higher timeframe for directional bias via EMA(50)
— Volume Confirmation (default On): add confluence when volume > 1.5× average (auto-disabled on forex)
📊 Dashboard
The info panel (adjustable to any chart corner) displays in real time:
— Swing trend direction (Bullish / Bearish)
— Internal trend direction
— Fibonacci range (Strong High — Strong Low)
— Count of active OBs, FVGs, and IFVGs
— HTF bias (if enabled)
— Current timeframe and indicator version
⚠️ IMPORTANT NOTES
— This indicator does not repaint. All signals and zone creations require bar-close confirmation. The HTF filter uses the standard [1] + lookahead_on non-repainting pattern.
— SME is a structural analysis and zone-mapping tool — it identifies where institutional activity likely occurred, but it does not generate explicit buy/sell signals. Trade decisions should incorporate your own entry triggers, risk management, and additional confluence.
— Past structure patterns and zone reactions do not guarantee future price behavior.
— Performance may vary across instruments and timeframes. Lower timeframes produce more zones and structure shifts; use the ATR filter and Max Visible caps to manage noise.
— The indicator works across all asset classes. Volume-based features (OB grading) are automatically adjusted on instruments without volume data.
Versionshinweise
SMART MONEY ENGINE — MAJOR UPDATE v1.3.0 → v1.6.1This is the biggest update since release. Four version cycles (v1.4.0 → v1.6.1) merged into one publication: a real confluence grading engine, a full liquidity module with sweep detection, zone-entry alerts, a trend-aware Fibonacci grid and a redesigned dashboard. Plus an honest list of every bug that was found and fixed along the way — including two that existed in the version you were using.
━━━━━━━━━━━━━━━━━━━━━━
1. CONFLUENCE GRADING ENGINE — NOW REAL
Honest disclosure first: in v1.3.0 the A/B/C order block grading was partially a stub. Grade "A" was unreachable (the FVG-overlap check described in the tooltip did not exist in code), the "Volume Confirmation" toggle had no effect on anything, and the HTF filter only colored a dashboard row. That is exactly the kind of thing I criticize in other indicators, so it is fixed properly.
Every order block is now scored from up to four real confluence factors:
► FVG — the OB overlaps an active same-direction Fair Value Gap (including the displacement FVG created on the break bar itself)
► SWP — the OB formed within N bars after a liquidity sweep in the matching direction (BSL sweep → bearish OB, SSL sweep → bullish OB)
► VOL — volume spike above 1.5× the prior-bar SMA20 (only when Volume Confirmation is enabled; auto-excluded on no-volume symbols)
► HTF — OB direction aligned with the higher-timeframe EMA-50 bias (only when an HTF is set)
Grades: A = 2+ factors, B = 1, C = 0. Hover any grade label to see the full factor breakdown, e.g. "FVG✓ SWP✓ VOL✗ HTF✗". FVG and liquidity detection run internally even when their visual toggles are off, so grading never depends on your display settings.
2. LIQUIDITY ENGINE — EQH/EQL POOLS + SWEEP DETECTION (NEW)
► Two consecutive swing pivots within an ATR-based tolerance form an EQH/EQL liquidity pool (dotted line + label)
► Sweep detection: a wick through the pool followed by a close back inside (confirmed bar only) prints a BSL/SSL Sweep label and feeds the SWP confluence factor
► A close through the pool removes it silently — a break-through is not a sweep
► Pools at the same level merge instead of duplicating; a backfill scan covers the pivot confirmation lag, so sweeps that happen before the pool becomes visible are still detected from confirmed history (marked with dimmed labels, no alert — the event is stale by definition)
3. ZONE-ENTRY ALERTS (NEW)
The alert system now covers entries, not just structure. Each fires once per zone lifetime:
► OB Retest — price returns into an active order block, with a grade filter (A only / A+B / All); webhook JSON includes the grade field
► FVG Retest — first touch of an active gap; deliberately does NOT fire if the gap is blown through on the same bar
► OTE Entry — close enters the 0.618–0.786 zone of the current impulse leg
► Liquidity Sweep — BSL/SSL sweep events
Alert timing is selectable: Bar Close (default, consistent with the anti-repaint discipline of this script) or Immediate — fires on the first intrabar touch. A wick touch is a fact and cannot repaint, but be aware the bar is not final yet. Sweep alerts are always bar-close because a sweep requires a confirmed close.
In total: 11 static alertcondition events (BOS, CHoCH, sweeps, retests, OTE — each direction separately) plus dynamic alert() messages with webhook JSON for bot integrations. Static events in the TradingView alert dialog always work regardless of the alert toggles in settings — the toggles only control the dynamic messages.
4. TREND-AWARE FIBONACCI + TRUE OTE
► The auto Fibonacci grid now anchors by trend: bull trend → retracement of the low→high leg, bear trend → retracement of the high→low leg. In v1.3.0 the grid was always drawn top-down regardless of trend, which made the highlighted zone wrong for one of the two directions.
► Behavior change: the OTE zone moved from 0.5–0.618 to the canonical ICT 0.618–0.786. If you had visual references based on the old zone, they will shift.
► New dashboard row shows OTE status live: Inside ✓ / Outside.
5. REDESIGNED DASHBOARD
► Sectioned layout — Market / Zones / Fibonacci — each section toggles individually, table height adapts
► Trend-colored header, zebra rows, a tooltip on every row explaining what you are looking at
► New rows: trend Age (bars since the last structure break), Last OB grade, Liquidity Pools count, OTE status
► Font size input and a Middle Right position option
6. BUGS FIXED (FULL LIST)
As always — everything found, listed:
► Object garbage collector deleted live labels. v1.3.0 manually trimmed the oldest labels/lines when nearing the 500 cap — but "oldest" included the side-labels and midlines of still-active OB/FVG zones. Active zones could silently lose their markings. The manual GC is removed; native limits handle it.
► Intrabar zone flicker. Close-based mitigation (OB "Close" mode, IFVG) evaluated on unconfirmed intrabar closes — zones could vanish mid-bar and reappear. Now gated to confirmed bars.
► Same-bar double break mislabeled alerts. If a bullish and bearish structure break landed on one bar, both alert messages took the bullish branch. Messages are now built separately per direction.
► Volume spike diluted its own baseline. The spike bar was included in the SMA it was compared against. Baseline is now the prior bar's SMA.
► One zero-volume bar disabled volume grading. Volume availability is now a symbol property (cumulative), not a per-bar check.
► OB search edge case could select the current bar as the order block when the search window collapsed to zero.
► First swing pivot was force-labeled LH/HL with no previous pivot to compare against.
► Auto theme detection used only the red channel of the chart background; now uses full luminance.
7. KNOWN BEHAVIORS (BY DESIGN)
► The OTE zone shifts when the impulse leg extends to a new extreme — an OTE alert can fire because the zone moved onto price, not only because price moved into it.
► Sweep detection covers EQH/EQL pools only. Single-pivot SFP detection is a different pattern with a different false-positive profile and may come as a separate feature.
► After this update, historical OB grades will recalculate — the volume-factor fixes make grading stricter and more honest, so some borderline grades on past bars will change.
━━━━━━━━━━━━━━━━━━━━━━
No indicator predicts the market. This one structures what already happened — honestly. Trade safe.
— Willy | WillyAlgoTrader
10 years in trading. For all inquiries, contact me on my Telegram channel: t.me/WillyAlgoTrader or Instagram: @willytraderbtc
Haftungsausschluss
Die Informationen und Veröffentlichungen sind nicht als Finanz-, Anlage-, Handels- oder andere Arten von Ratschlägen oder Empfehlungen gedacht, die von TradingView bereitgestellt oder gebilligt werden, und stellen diese nicht dar. Lesen Sie mehr in den Nutzungsbedingungen.
10 years in trading. For all inquiries, contact me on my Telegram channel: t.me/WillyAlgoTrader or Instagram: @willytraderbtc
Haftungsausschluss
Die Informationen und Veröffentlichungen sind nicht als Finanz-, Anlage-, Handels- oder andere Arten von Ratschlägen oder Empfehlungen gedacht, die von TradingView bereitgestellt oder gebilligt werden, und stellen diese nicht dar. Lesen Sie mehr in den Nutzungsbedingungen.