Aktualisiert
Harmonic Scanner V1PRO
Get this and other exclusive indicators in 10xTrading Indicators
This indicator is part of 10xTrading's Paid Space. Subscribe for $4.99/month to use it on your charts along with the author's other exclusive indicators. You pay right on TradingView and get access straight away.
Explore 10xTrading IndicatorsHarmonic Scanner V1PRO is an invite-only indicator that scans price action for harmonic XABCD structures derived from confirmed swing pivots and visualizes Potential Reversal Zones (PRZ) directly on the chart.
What makes it different
This tool combines multi-sensitivity scanning (up to 10 scanners) with per-scanner candidate ranking (3-slot management), a quality score (xScore), and a pivot-context control (xFactor) to reduce noise and keep only the cleanest structures on the chart.
What it does
• Runs up to 10 independent scanners in parallel. Each scanner can be tuned with its own swing sensitivity (Level), minimum structure depth (XC-Depth), and a tolerance scaling factor.
• Uses xFactor (pivot context window) to control how broadly each scanner searches recent swing structure. Higher xFactor allows the engine to ignore minor intermediate pivots (noise) and anchor patterns on larger swings; lower xFactor stays stricter and more local.
• Detects, scores (xScore) and ranks harmonic XABCD candidates across the enabled pattern families: Gartley, Bat, Butterfly, Crab, Deep Crab, Alternate Bat, Shark, and Cypher.
• Maintains up to 3 active “slots” per scanner (top-ranked candidates), with optional slot hysteresis to reduce churn and keep the display stable.
• Draws X-A-B-C legs plus CD projection, and builds a PRZ (Potential Reversal Zone) using either:
– XA|XC projection mode (projection-based display), or
– Confluence mode (tighter overlap of projection targets).
• Tracks PRZ interaction and can mark a PRZ as “HIT” using Wick-touch or Close-inside logic, with an optional freeze/extend behavior.
How it works (overview)
1) Swing pivots are detected using confirmed pivots (ZigZag-style structure). Because pivots must confirm, signals can appear with natural delay and candidates can evolve until the relevant pivots are confirmed.
2) For each scanner, the engine evaluates recent pivot sequences as potential X-A-B-C structures and validates them against Fibonacci ratio windows (with user-configurable tolerances).
3) Candidates are scored with xScore (0–100). The default model combines:
– FibFit (ratio accuracy),
– PRZ confluence quality,
– Symmetry (time/leg proportionality),
with an optional “Kink/Context” mode that adds structure and ATR-width penalties for more selective filtering.
4) The best candidates are loaded into the scanner’s 3 slots and displayed with PRZ boundaries and optional fills.
Key controls (recommended workflow)
• Start with defaults. If the chart is busy: increase xScore minimum, reduce maxPattern, disable some pattern families, or disable some scanners.
• Use Level (pivot length) to control sensitivity: lower = more pivots/more signals, higher = fewer pivots/cleaner swings.
• Use XC-Depth to filter micro-patterns.
• xFactor: sets the pivot context window used for candidate generation (higher = more context / more “pivot skipping”, lower = stricter textbook structure).
• Use Tolerance Factor per scanner to tighten/loosen matching without changing global pattern tolerance settings.
• Choose PRZ hit trigger (Wick vs Close) and PRZ calculation mode (XA|XC vs Confluence) based on how conservative you want hits to be.
Alerts (optional)
This script can emit consolidated alerts across scanners:
• DETECTED: when a new pattern is loaded/updated into a slot.
• PRZ HIT: when price hits the PRZ per your trigger rule.
Alert output can be Text or JSON (template-based) and can be throttled using “Max N per bar” to reduce alert spam.
Create alerts using TradingView’s “Any alert() function call”.
Backtest / Debug (optional)
• Debug ZigZag overlays can be enabled to visualize the swing structure used by a scanner.
• Backtest Mode archives recent PRZ hit events and estimates simplified outcomes using configurable parameters. This is research tooling only; it does not place orders and makes simplified assumptions.
Notes & limitations
• This is a pattern/zone visualization and alerting tool, not investment advice and not a guarantee of results.
• Pivot confirmation introduces natural delay; candidates may change until pivots are confirmed.
• PRZ is a zone (not a promise). A PRZ hit does not imply a reversal will occur.
• Performance and chart clutter depend on enabled scanners, history length, and drawing density. Reduce these if needed.
What makes it different
This tool combines multi-sensitivity scanning (up to 10 scanners) with per-scanner candidate ranking (3-slot management), a quality score (xScore), and a pivot-context control (xFactor) to reduce noise and keep only the cleanest structures on the chart.
What it does
• Runs up to 10 independent scanners in parallel. Each scanner can be tuned with its own swing sensitivity (Level), minimum structure depth (XC-Depth), and a tolerance scaling factor.
• Uses xFactor (pivot context window) to control how broadly each scanner searches recent swing structure. Higher xFactor allows the engine to ignore minor intermediate pivots (noise) and anchor patterns on larger swings; lower xFactor stays stricter and more local.
• Detects, scores (xScore) and ranks harmonic XABCD candidates across the enabled pattern families: Gartley, Bat, Butterfly, Crab, Deep Crab, Alternate Bat, Shark, and Cypher.
• Maintains up to 3 active “slots” per scanner (top-ranked candidates), with optional slot hysteresis to reduce churn and keep the display stable.
• Draws X-A-B-C legs plus CD projection, and builds a PRZ (Potential Reversal Zone) using either:
– XA|XC projection mode (projection-based display), or
– Confluence mode (tighter overlap of projection targets).
• Tracks PRZ interaction and can mark a PRZ as “HIT” using Wick-touch or Close-inside logic, with an optional freeze/extend behavior.
How it works (overview)
1) Swing pivots are detected using confirmed pivots (ZigZag-style structure). Because pivots must confirm, signals can appear with natural delay and candidates can evolve until the relevant pivots are confirmed.
2) For each scanner, the engine evaluates recent pivot sequences as potential X-A-B-C structures and validates them against Fibonacci ratio windows (with user-configurable tolerances).
3) Candidates are scored with xScore (0–100). The default model combines:
– FibFit (ratio accuracy),
– PRZ confluence quality,
– Symmetry (time/leg proportionality),
with an optional “Kink/Context” mode that adds structure and ATR-width penalties for more selective filtering.
4) The best candidates are loaded into the scanner’s 3 slots and displayed with PRZ boundaries and optional fills.
Key controls (recommended workflow)
• Start with defaults. If the chart is busy: increase xScore minimum, reduce maxPattern, disable some pattern families, or disable some scanners.
• Use Level (pivot length) to control sensitivity: lower = more pivots/more signals, higher = fewer pivots/cleaner swings.
• Use XC-Depth to filter micro-patterns.
• xFactor: sets the pivot context window used for candidate generation (higher = more context / more “pivot skipping”, lower = stricter textbook structure).
• Use Tolerance Factor per scanner to tighten/loosen matching without changing global pattern tolerance settings.
• Choose PRZ hit trigger (Wick vs Close) and PRZ calculation mode (XA|XC vs Confluence) based on how conservative you want hits to be.
Alerts (optional)
This script can emit consolidated alerts across scanners:
• DETECTED: when a new pattern is loaded/updated into a slot.
• PRZ HIT: when price hits the PRZ per your trigger rule.
Alert output can be Text or JSON (template-based) and can be throttled using “Max N per bar” to reduce alert spam.
Create alerts using TradingView’s “Any alert() function call”.
Backtest / Debug (optional)
• Debug ZigZag overlays can be enabled to visualize the swing structure used by a scanner.
• Backtest Mode archives recent PRZ hit events and estimates simplified outcomes using configurable parameters. This is research tooling only; it does not place orders and makes simplified assumptions.
Notes & limitations
• This is a pattern/zone visualization and alerting tool, not investment advice and not a guarantee of results.
• Pivot confirmation introduces natural delay; candidates may change until pivots are confirmed.
• PRZ is a zone (not a promise). A PRZ hit does not imply a reversal will occur.
• Performance and chart clutter depend on enabled scanners, history length, and drawing density. Reduce these if needed.
Versionshinweise
UPDATE 1.9.5:- New "Show CD" toggle: additional toggle to independently turn on/off C-D lines
Versionshinweise
UPDATE 1.9.6:- Added separate PRZ Fill color settings for W-shaped and M-shaped harmonics, allowing individual fill colors for each pattern type (e.g. green for M, red for W).
Versionshinweise
UPDATE 2.0:NEW: QuickScope Mode added: early speculative harmonic C detection before confirmed pivot C. (Repainting by design!)
- Earlier C-D projections: potential harmonic opportunities can now appear much sooner during active charting.
- Configurable QS confirmation: print QuickScope C only after N candle closes inside the potential C zone.
- Separate QS Max Pattern limit: normal patterns and QuickScope patterns now have independent visual caps.
- Textbook mode protected: QuickScope is designed as an add-on layer, not a replacement for confirmed patterns.
- Cleaner QS labeling: QuickScope patterns now display as Pattern (QS) for professional chart readability.
- Independent M/W balancing: normal and QS pattern pools now respect 1M + 1W separately.
- Stronger QS invalidation: QS patterns are removed on C-zone breaks, A-breaks, or B-structure breaks.
- Repainting by design: QS C can move with price while valid, giving faster but more speculative previews.
- Stable fallback foundation: with QS OFF, the script preserves the conservative textbook workflow.
- New Default Settings for a even better "out of the box" user experience
Versionshinweise
UPDATE 2.0.1:=== New Default Settings ===
- Updated default scanner levels and tolerance settings
- Fine-tuned harmonic pattern tolerances
- X-A-B-C lines are now disabled by default
To display the X-A-B-C structure, enable it manually in the settings.
=== Fixes ===
- Fixed an issue where QS Mode could falsely invalidate valid patterns
- Fixed an issue where each scanner could trigger only one alert instead of up to three alerts
Versionshinweise
MICROFIX V2.0.1.1:- Slightly adjusted individual scanner tolerance defaults.
Versionshinweise
UPDATE 2.0.2:=== New Visual Tag Merge ===
- Added optional overlap tag merging (in menu: "Labels" -> "merge overlap tags on/off" for PRZ and PRZ HIT labels
- Highest xScore tag stays visible, merged setups are shown as +N
- Full details of all merged setups remain available in the tooltip
=== New Default Settings ===
- Updated Scanner 8-10 tolerance defaults
- Fine-tuned Alternate Bat, Shark and Cypher C tolerances
Versionshinweise
FIX 2.0.2.1:- Fixed overlapping PRZ Hit Tags from the 2.0.2 update.
Versionshinweise
FIX 2.0.2.2 & 2.0.2.3:- Fixed overlapping PRZ Hit Tags from the 2.0.2 update
Versionshinweise
FIX 2.0.2.4:- Slightly adjusted "Scanner Level" (Scanner 4-10)
Versionshinweise
FIX 2.0.2.4_TT: - New tooltips
Versionshinweise
UPDATE 2.0.2.5:=== New PRZ Hit Pattern Reveal ===
- Added "Show X-A-B-C-D only when PRZ hit"
- The chart now stays PRZ-only until a PRZ is hit
- "Show X-A-B-C" and "Show CD" select which legs appear after the hit
- For merged PRZ hits, only the pattern belonging to the visible highest-xScore tag is drawn
- Merged setups remain available in the tooltip
=== New Default Settings ===
- QuickScope C: ON
- Line Width XABC: 2
- Line Width CD: 2
- Show X-A-B-C-D only when PRZ hit: ON
- Show X-A-B-C: ON
- Show CD: ON
=== Restore 2.0.2.4 Behavior ===
1. Click the indicator's gear icon → "Inputs"
2. Under "GLOBAL SETTINGS":
- Set "QuickScope C" to OFF
(Keep it ON if you intentionally want to use QuickScope)
3. Under "GLOBAL SCANNER STYLE":
- Set "Line Width XABC" to 1
- Set "CD" to 1
- Keep "PRZ" at 1
- Set "Show X-A-B-C-D only when PRZ hit" to OFF
- Set "Show X-A-B-C" to OFF
- Keep "Show CD" ON
These settings restore the 2.0.2.4 default behavior and line display.
Versionshinweise
UPDATE 2.0.2.6:=== New M/W Line Color Override ===
- Added optional "M/W Line Color Override"
- M patterns can now use a separate "M Lines" color
- W patterns can now use a separate "W Lines" color
- Applies only to live X-A-B-C and CD lines
- Default colors: Green for M patterns and Red for W patterns
- Weak Transparency remains active: lower scores appear more transparent, higher scores more solid
- xScore tag colors, PRZ colors, Alerts and Backtest remain unchanged
=== How to Enable ===
1. Click the indicator's gear icon → "Inputs"
2. Under "GLOBAL SCANNER STYLE":
- Enable "M/W Line Color Override"
- Select the preferred "M Lines" color
- Select the preferred "W Lines" color
=== Restore 2.0.2.5 Behavior ===
- Set "M/W Line Color Override" to OFF
The override is OFF by default, so the complete 2.0.2.5 Slot/xScore line-color behavior remains unchanged until the new option is enabled.
Versionshinweise
UPDATE 2.1.0.0:=== Deterministic Pivot Engine ===
- Improved handling of rare candles that confirm both a Pivot High and Pivot Low
- Pivot direction is now resolved deterministically from the previous pivot
- Prevents two conflicting pivots from being created on the same candle
- Normal pivot and pattern behavior remains unchanged
UPDATE 2.1.0.1:
=== QuickScope C Accuracy ===
- QuickScope C now tracks the true price extreme reached after point B
- Bullish C can only move higher; bearish C can only move lower
- C can no longer move back to a weaker price after reaching a stronger extreme
- C position, PRZ, projection and xScore update together
UPDATE 2.1.0.2:
=== PRZ Validation Before Ranking ===
- PRZ confluence is now validated before candidate ranking
- Candidates without a valid PRZ overlap can no longer occupy or replace slots
- Valid patterns can move into available ranking positions more reliably
- Existing XA/XC and BC quality requirements remain unchanged
UPDATE 2.1.0.3:
=== Improved PRZ HIT Lifecycle ===
- PRZ zones now freeze automatically after their first confirmed hit
- The previous Freeze PRZ toggle has been removed
- Default post-hit visibility: 200 bars
- Maximum post-hit visibility increased to 500 bars
- Confirmed hits are archived on the following candle
- The active slot is then released for the next valid pattern
UPDATE 2.1.0.4:
=== Time Stop Removed ===
- Removed the "Max Bars In Trade" setting
- Backtest trades are no longer frozen after an arbitrary number of candles
- Open trades remain eligible for Stop or Target evaluation
- No replacement timeout or artificial exit was added
UPDATE 2.1.0.5:
=== Causal Backtest Engine ===
- Rebuilt entry and outcome processing around a causal trade sequence
- PRZ HIT must occur before a trade can enter
- Wick Mode uses a pending entry at the 50% depth of the PRZ
- Close Mode enters at the opening price of the following candle
- Stop and Target are evaluated only after a possible entry
- Ambiguous same-candle outcomes use conservative Stop priority
- Removed the redundant Same Bar Priority and Stop Buffer settings
UPDATE 2.1.0.6:
=== Reliable JSON & Discord Alerts ===
- Added complete JSON escaping for quotes, backslashes, line breaks and tabs
- All template placeholders are now replaced reliably
- Improved handling of multiple alert events in one message
- Added compact M/W direction information
- Updated the default Discord JSON template
- Text alert mode remains available and unchanged
UPDATE 2.1.0.7:
=== Deterministic M/W Color System ===
- M patterns now use the global "M Line Color"
- W patterns now use the global "W Line Color"
- Default colors: Green for M patterns and Red for W patterns
- Colors apply consistently to live, QuickScope, HIT archive, Backtest and PRZ boundary lines
- Weak Transparency remains optional: lower scores appear more transparent
- Removed xScore color gradients and Slot 1/2/3 colors
- Removed the previous M/W Color Override toggle
- Tag, PRZ Fill, HIT Tag and Debug colors remain separately configurable
=== PRZ Always Active ===
- Removed the global "Show PRZ" toggle
- PRZ fills and internal zone objects are now always active
- "PRZ Lines" now controls only the visible boundary lines
- HIT invalidation, tag merging and overlap transparency remain active even when PRZ boundary lines are hidden
=== Unified Scanner Calibration ===
- All ten Scanner Tolerance Factors now default to 95%
- Scanner formulas and manual tolerance controls remain unchanged
- New or reset 2.1.0.7 instances now start from one consistent calibration
Versionshinweise
UPDATE 2.1.1:=== New Version Format ===
- Versions now use the compact x.x.x format
- This release starts the new format with V1PRO 2.1.1
=== Refined Default Settings ===
- Global XC-Depth default increased from 23 to 30
- The new default focuses detection on larger, more established structures
- Per-scanner XC-Depth overrides remain available
- maxPattern default increased from 5 to 10
- Up to 10 normal/non-QS patterns can now remain visible by default
- maxPattern remains visual only; detection, alerts and backtest evaluation are unchanged
- QuickScope Max Pattern remains unchanged
=== Cleaner Menu Structure ===
- PRO SETTINGS moved to the bottom of the menu
- BACKTEST now sits directly above PRO SETTINGS
- All existing PRO SETTINGS controls and values remain unchanged
=== Technical Integrity ===
- No changes to pattern ratios, xScore formulas, ranking, lifecycle, alerts or backtest execution
- ZigZag functionality remains unchanged
Versionshinweise
UPDATE 2.1.2:=== New Causal Wick Backtest Engine ===
- Completely rebuilt the Backtest Mode for causal Wick-based execution
- Entries now use the scanner-neutral Ideal D Anchor and adjustable D Entry Offset
- One 100% position is opened at the calculated entry level
- Default management: 60% exit at TP1 and 40% runner toward TP2
- Runner stop moves to break-even after TP1
- Initial and break-even stops require a confirmed candle close
- ARMED orders and active trades have no time expiry or silent eviction
- Added parallel trade handling, Fill Rate, AvgR, Profit Factor and live ARMED statistics
- Backtest Mode with PRZ Hit Trigger = Close intentionally displays N/A
- Previous Backtest results are not directly comparable due to the completely revised execution model
UPDATE 2.1.3:
=== QuickScope Backtest Synchronization ===
- Fixed a rare edge case where an accepted QuickScope C update could be lost during a same-candle slot reset or replacement
- Existing ARMED orders now receive the latest valid stricter C geometry
- Revised geometry becomes eligible from the following candle
- Filled, cancelled or invalidated setups are never re-armed
- Duplicate QuickScope updates remain safely deduplicated
- Affected Backtest statistics may change marginally; live scanner signals and alerts remain unaffected
=== Final Default Calibration ===
- Global XC-Depth default changed from 30 to 25
- Allows moderately tighter structures on fresh or reset instances
- Active and HIT PRZ Overlap Strength increased from 0.50 to 0.75
- Improves the visual hierarchy of overlapping target zones
- Existing saved settings may remain unchanged until reset or newly added
- Final source synchronized with Wick Backtest Contract 3.1
Versionshinweise
=== IMPORTANT: MAJOR UPDATE ===- This release includes major improvements to scoring, scanner capacity and pattern handling
- All users should reload the indicator and reset all settings to default before use
- Existing chart instances may retain settings from previous versions
- Reloading with default settings ensures that all new features and updated defaults are applied correctly
UPDATE 2.2.0:
=== Unified xScore Engine ===
- Rebuilt xScore as one consistent 0–100 pattern quality model
- Improved score consistency across symbols, price scales and bullish/bearish setups
- Improved pattern filtering, candidate ranking and slot replacement
- QuickScope scores now update consistently as valid patterns develop
- Pattern scores remain fixed after a PRZ Hit
- Added clearer xScore details to pattern tooltips
- Removed the previous scoring modes and related tuning controls
- Harmonic definitions and scanner detection tolerances remain unchanged
- Existing xScore thresholds and presets may produce different results than in 2.1.3
UPDATE 2.3.0:
=== Expanded Scanner Capacity ===
- Added selectable 3, 4 or 5 slot capacity per scanner
- Allows more concurrent patterns to be retained on shorter scanner levels
- All additional slots use the same detection, xScore, ranking and lifecycle rules
- Default capacity remains at 3 slots for direct comparison with 2.2.0
- xScore and harmonic pattern definitions remain unchanged
UPDATE 2.3.1:
=== Five-Slot Production Release ===
- Five candidate slots per scanner are now permanently enabled
- Removed the temporary slot-capacity test setting
- Existing visual pattern limits continue to control chart density
- Improved QuickScope synchronization for pending Backtest Mode setups
- Rejected QuickScope refinements no longer affect previously accepted setups
- Optimized the Debug ZigZag display to reduce chart object usage
- xScore, harmonic detection and regular pattern drawings remain unchanged
UPDATE 2.3.2:
=== Merged HIT Tag Consistency ===
- Fixed merged HIT tags retaining expired or invalidated patterns in their count
- Merged tag tooltips now contain only the patterns that remain active
- The highest-scoring remaining pattern stays visible when the previous leader expires
- Update affects merged post-hit tags only
- Detection, xScore, PRZ calculations, alerts and Backtest Mode remain unchanged
Versionshinweise
UPDATE 2.3.5:=== Stability & Alert Reliability ===
- Improved rare PRZ Hit and pattern lifecycle edge cases
- Improved QuickScope validation and synchronization
- Improved HIT tag consistency after pattern updates or invalidation
- Strengthened Discord and JSON alert payload handling
- Added protection for oversized custom JSON templates
- Corrected detected-pattern tooltip information
- Default minimum xScore changed to 50 for new or reset instances
- Harmonic definitions and xScore calculations remain unchanged
- Existing TradingView alerts must be recreated to use the latest alert logic
UPDATE 2.3.6:
=== QuickScope Runtime Stability ===
- Fixed a reproducible runtime error during extended QuickScope evaluation in Bar Replay
- Improved historical-data handling for long-running pattern structures
- Strengthened stability across Bar Replay, live chart execution and server-side alerts
- No settings or default values changed
- Harmonic detection, xScore, PRZ calculations, pattern lifecycle, chart drawings and Backtest Mode remain unchanged
- Existing TradingView alerts must be recreated to run the updated version
UPDATE 2.3.7:
=== Causal Pattern Validation ===
- Fixed a rare case where delayed pivot confirmation could restore a pattern after its own PRZ had already been hit and invalidated
- Delayed standard patterns are rejected only when their own PRZ was hit and directionally invalidated within the configured post-hit window before scanner confirmation
- Applies consistently across all standard scanners and harmonic pattern types
- Valid patterns and QuickScope candidates remain unaffected
- Affected stale setups are no longer eligible for chart display or scanner-triggered alerts
- Harmonic definitions, xScore, ranking rules, scanner capacity, PRZ calculations and Backtest execution rules remain unchanged
- Existing TradingView alerts should be recreated after updating the indicator
Versionshinweise
UPDATE 2.4.0 — BIG UPDATE:=== What’s New ===
- Major scanner-engine upgrade for broader and more balanced harmonic pattern coverage
- Improved scanner synchronization and pattern lifecycle handling
- Expanded visibility with up to 50 concurrent pattern setups
- Smarter handling of overlapping and duplicate harmonic structures
- Improved consistency between Normal and QuickScope detection
- Enhanced Replay, Alert and Backtest consistency
- Overall scanner stability and pattern retention significantly improved
=== What Stays the Same===
- Harmonic pattern definitions and core calculations remain unchanged
- xScore, PRZ logic, Alert formats and Backtest rules remain unchanged
- Existing settings and workflow remain familiar
=== ⚠️ IMPORTANT — RELOAD REQUIRED ⚠️ ===
2.4.0 is a major internal scanner update. Please remove the previous indicator instance from the chart and add V1PRO Harmonic Scanner again to ensure the new engine initializes cleanly.
Do not rely on an already-loaded pre-2.4.0 chart instance after updating.
Versionshinweise
UPDATE 2.4.1:=== Stability & Alert Engine Hardening ===
- Fixed alert deduplication and delayed replay edge cases
- Improved Max-N alert ranking efficiency
- Optimized hidden HIT and alert-event lookups
- Fixed archived HIT overlap transparency on the current close
- Improved PRZ tag merge and overlap processing efficiency
- Cleaned outdated tooltips, labels and internal comments
- Pattern formulas, xScore, tolerances and trading logic remain unchanged
UPDATE 2.4.2:
=== PRZ Wick Hit Fix ===
- Fixed PRZ Wick Hit handling
- PRZ Hits now use wick contact consistently
- Removed the previous Wick / Close selection
UPDATE 2.4.3:
=== Simplified PRZ Calculation ===
- Standardized visible PRZ calculation to XA | XC
- Removed the alternative PRZ calculation mode and related input
- Preserved the existing BC intersection as a validity requirement
- Unified visible PRZ handling across scanner, renderer and backtest
- Pattern definitions, xScore, detection and Wick Hit logic remain unchanged
UPDATE 2.4.4:
=== Instant PRZ Hit Alerts ===
- Added optional “Instant” mode for PRZ Hit alerts
- Instant alerts trigger on the first observed realtime PRZ wick touch
- Default OFF preserves the existing bar-close alert behavior
- DETECTED alerts remain bar-close only
- Added intrabar deduplication and Max-N budget handling
- Existing alert payloads, limits and safety mechanisms remain preserved
- Moved “Scanner Design” settings to the bottom of the menu
IMPORTANT:
Please remove and re-add the indicator to your chart for the changes to take effect properly.
Versionshinweise
UPDATE 2.4.5:=== NEW DEFAULT SETTINGS ===
- Scanner Levels
- Colors
- Tag Offset
Versionshinweise
UPDATE 2.4.6=== NEW DEFAULTS ===
- Scanner Levels
- PRZ Fill Transparency
- Tag Offset
Technical Analysis & Indicators
Haftungsausschluss
Die Informationen und Veröffentlichungen sind nicht als Finanz-, Anlage-, Handels- oder andere Arten von Ratschlägen oder Empfehlungen gedacht, die von TradingView bereitgestellt oder gebilligt werden, und stellen diese nicht dar. Lesen Sie mehr in den Nutzungsbedingungen.
Technical Analysis & Indicators
Haftungsausschluss
Die Informationen und Veröffentlichungen sind nicht als Finanz-, Anlage-, Handels- oder andere Arten von Ratschlägen oder Empfehlungen gedacht, die von TradingView bereitgestellt oder gebilligt werden, und stellen diese nicht dar. Lesen Sie mehr in den Nutzungsbedingungen.