OPEN-SOURCE SCRIPT
jrhMultORB+CL
jrhMultORB_Checklist — Documentation
Non-destructive fork of the real jrhMultORB indicator. Every original input, calculation, marker, and alert is untouched — this version adds one new group ("Execution Checklist") and a second table wired directly to jrhMultORB's actual internal state, so the checklist can never disagree with the chart markers the way a separate/standalone recreation could.
What's New vs. the Original jrhMultORB
Only one new input group was added:
Setting What it controls
Show Checklist Table Master on/off for the new table
Position Where it renders (Top Right / Top Left / Bottom Right / Bottom Left)
Text Size Tiny / Small / Normal / Large
Everything else — Opening Range, Custom Range, Breakout Signals, Targets, Bull/Bear Target levels, Session Moving Average, Trend & Momentum, the original Info Table, and Style — is 100% identical to your source file.
Execution Checklist Table — Row Reference
OR Levels
Locked Opening Range high–low (orh–orl) once the OR session ends. Shows "forming..." while still building.
Day Bias / ADX
Same two readouts as your original Info Table:
• Bullish / Bearish / Neutral — day_dir, comparing this session's OR midpoint to the previous session's
• ADX value — same adxVal as the ADX row in your Info Table
Breakout Up / Breakout Down
Reflects upSignalUsed / downSignalUsed directly — "Fired this session" or "Not yet".
Retest (Up) / Retest (Down)
The core entry-decision row, reading waitRetestUp/waitRetestDown, retest_up/retest_down, and rtUpOutcome/rtDownOutcome directly from the real script:
Status Meaning Action
Not yet (from Breakout row) No breakout Wait
Armed - awaiting retest of ORH/ORL Breakout fired, watching for the retest touch Wait
RTC - continuation confirmed Retest candle closed back through the level Entry signal in the breakout direction
RTF - retest failed Retest candle closed back inside the range Don't enter continuation; watch the opposite Rev/Fade row
Retest window expired (stale) No touch within your Max Bars to Wait Void
Includes (N bars ago), computed from waitRetestUpBar/waitRetestDownBar — the actual bar index your real script arms the retest watch on. This tells you whether an RTC/RTF is live or historical context.
Rev/Fade (after Up-fail) / (after Dn-fail)
Only activates after the matching Retest shows RTF. Reads waitRevFadeLong/waitRevFadeShort and revLong/fadeLong/revShort/fadeShort directly:
Status Meaning
— Not armed
Armed - watching ORL/ORH for reversal/fade Watching the opposite level after an RTF
REV - reversed through ORL/ORH, fresh short/long Opposite level closed through — new opportunity in the new direction
FADE - rejected at ORL/ORH, range holding Opposite level touched but rejected — range is holding
Also includes (N bars ago), from waitRevFadeLongBar/waitRevFadeShortBar.
Signal vs Bias Check
Compares a confirmed RTC direction against day_dir (the same Day Bias shown two rows up — not a separate ADX-based proxy):
Display Meaning
No conflict No confirmed RTC yet, or it agrees with Day Bias
⚠ Confirmed LONG vs Bearish Day Bias RTC long confirmed while Day Bias reads Bearish
⚠ Confirmed SHORT vs Bullish Day Bias RTC short confirmed while Day Bias reads Bullish
A caution flag, not a stop signal — it's a cue to size down, tighten stops, or be skeptical of extended targets, not an automatic skip.
Important Usage Notes
• Retest/Rev-Fade rows are historical snapshots. They hold whatever text they last resolved to until the next OR session resets them — always check the (N bars ago) tag before treating a status as a live signal.
• Day Bias / ADX recalculates live, so it can visibly diverge from an older Retest status as the session progresses.
• All checklist state resets automatically at the start of each new OR session (or_start), same as your original script's own state.
• This checklist reads your actual script's internal variables — it cannot disagree with the breakout/retest/REV/FADE markers drawn on the chart, since both come from the same calculation.
• Still no automatic stop/target/position-size calc — pair with your own risk rules, same as before.
Non-destructive fork of the real jrhMultORB indicator. Every original input, calculation, marker, and alert is untouched — this version adds one new group ("Execution Checklist") and a second table wired directly to jrhMultORB's actual internal state, so the checklist can never disagree with the chart markers the way a separate/standalone recreation could.
What's New vs. the Original jrhMultORB
Only one new input group was added:
Setting What it controls
Show Checklist Table Master on/off for the new table
Position Where it renders (Top Right / Top Left / Bottom Right / Bottom Left)
Text Size Tiny / Small / Normal / Large
Everything else — Opening Range, Custom Range, Breakout Signals, Targets, Bull/Bear Target levels, Session Moving Average, Trend & Momentum, the original Info Table, and Style — is 100% identical to your source file.
Execution Checklist Table — Row Reference
OR Levels
Locked Opening Range high–low (orh–orl) once the OR session ends. Shows "forming..." while still building.
Day Bias / ADX
Same two readouts as your original Info Table:
• Bullish / Bearish / Neutral — day_dir, comparing this session's OR midpoint to the previous session's
• ADX value — same adxVal as the ADX row in your Info Table
Breakout Up / Breakout Down
Reflects upSignalUsed / downSignalUsed directly — "Fired this session" or "Not yet".
Retest (Up) / Retest (Down)
The core entry-decision row, reading waitRetestUp/waitRetestDown, retest_up/retest_down, and rtUpOutcome/rtDownOutcome directly from the real script:
Status Meaning Action
Not yet (from Breakout row) No breakout Wait
Armed - awaiting retest of ORH/ORL Breakout fired, watching for the retest touch Wait
RTC - continuation confirmed Retest candle closed back through the level Entry signal in the breakout direction
RTF - retest failed Retest candle closed back inside the range Don't enter continuation; watch the opposite Rev/Fade row
Retest window expired (stale) No touch within your Max Bars to Wait Void
Includes (N bars ago), computed from waitRetestUpBar/waitRetestDownBar — the actual bar index your real script arms the retest watch on. This tells you whether an RTC/RTF is live or historical context.
Rev/Fade (after Up-fail) / (after Dn-fail)
Only activates after the matching Retest shows RTF. Reads waitRevFadeLong/waitRevFadeShort and revLong/fadeLong/revShort/fadeShort directly:
Status Meaning
— Not armed
Armed - watching ORL/ORH for reversal/fade Watching the opposite level after an RTF
REV - reversed through ORL/ORH, fresh short/long Opposite level closed through — new opportunity in the new direction
FADE - rejected at ORL/ORH, range holding Opposite level touched but rejected — range is holding
Also includes (N bars ago), from waitRevFadeLongBar/waitRevFadeShortBar.
Signal vs Bias Check
Compares a confirmed RTC direction against day_dir (the same Day Bias shown two rows up — not a separate ADX-based proxy):
Display Meaning
No conflict No confirmed RTC yet, or it agrees with Day Bias
⚠ Confirmed LONG vs Bearish Day Bias RTC long confirmed while Day Bias reads Bearish
⚠ Confirmed SHORT vs Bullish Day Bias RTC short confirmed while Day Bias reads Bullish
A caution flag, not a stop signal — it's a cue to size down, tighten stops, or be skeptical of extended targets, not an automatic skip.
Important Usage Notes
• Retest/Rev-Fade rows are historical snapshots. They hold whatever text they last resolved to until the next OR session resets them — always check the (N bars ago) tag before treating a status as a live signal.
• Day Bias / ADX recalculates live, so it can visibly diverge from an older Retest status as the session progresses.
• All checklist state resets automatically at the start of each new OR session (or_start), same as your original script's own state.
• This checklist reads your actual script's internal variables — it cannot disagree with the breakout/retest/REV/FADE markers drawn on the chart, since both come from the same calculation.
• Still no automatic stop/target/position-size calc — pair with your own risk rules, same as before.
Open-source Skript
Ganz im Sinne von TradingView hat dieser Autor sein/ihr Script als Open-Source veröffentlicht. Auf diese Weise können nun auch andere Trader das Script rezensieren und die Funktionalität überprüfen. Vielen Dank an den Autor! Sie können das Script kostenlos verwenden, aber eine Wiederveröffentlichung des Codes unterliegt unseren Hausregeln.
Haftungsausschluss
Die Informationen und Veröffentlichungen sind nicht als Finanz-, Anlage-, Handels- oder andere Arten von Ratschlägen oder Empfehlungen gedacht, die von TradingView bereitgestellt oder gebilligt werden, und stellen diese nicht dar. Lesen Sie mehr in den Nutzungsbedingungen.
Open-source Skript
Ganz im Sinne von TradingView hat dieser Autor sein/ihr Script als Open-Source veröffentlicht. Auf diese Weise können nun auch andere Trader das Script rezensieren und die Funktionalität überprüfen. Vielen Dank an den Autor! Sie können das Script kostenlos verwenden, aber eine Wiederveröffentlichung des Codes unterliegt unseren Hausregeln.
Haftungsausschluss
Die Informationen und Veröffentlichungen sind nicht als Finanz-, Anlage-, Handels- oder andere Arten von Ratschlägen oder Empfehlungen gedacht, die von TradingView bereitgestellt oder gebilligt werden, und stellen diese nicht dar. Lesen Sie mehr in den Nutzungsbedingungen.