Auf geht's

Bill Williams-Indikatoren

Maki YTD + FibonacciMaki YTD + Fibonacci – Trend & Level Tracking Indicator Maki YTD + Fibonacci is a comprehensive yet clean technical analysis indicator that combines trend direction, dynamic support & resistance, and manually defined Fibonacci levels into a single, easy-to-use tool. This indicator is designed to help traders clearly identify trend bias, pullback zones, and key price levels at a glance. 🔹 Features & Components ✅ EMA 200 – Primary Trend Filter Identifies long-term trend direction. Price above EMA 200 → Bullish bias Price below EMA 200 → Bearish bias Fully customizable color and visibility. ☁️ EMA 28–40 Trend Cloud Visualizes short- and medium-term trend strength. EMA 28 > EMA 40 → Bullish trend EMA 28 < EMA 40 → Bearish trend Helps detect trend transitions early. Adjustable color and transparency. 🔵 Kijun Sen (26) Based on Ichimoku methodology. Acts as a dynamic equilibrium level. Strong dynamic support & resistance. Useful reference for pullbacks within trends. 🟠 Senkou Span B (52 – Forward Shifted) Highlights strong horizontal support & resistance zones. Forward-shifted to project potential balance zones ahead of price. 📐 Manual Fibonacci Levels Fibonacci levels are manually defined, not automatically calculated. Users input: Fibo 0 → Swing High Fibo 1 → Swing Low The indicator calculates and plots: 0.236 – 0.382 – 0.5 – 0.618 – 0.786 Fully customizable: Line colors Line thickness Label visibility 🎯 How to Use Identify dominant trend direction Track dynamic & horizontal support/resistance Analyze pullbacks and continuation zones Monitor fixed Fibonacci levels based on your own market scenario ⚠️ Disclaimer This indicator is for educational and informational purposes only and does not constitute investment advice. Trading in financial markets involves risk, and you should always manage your own risk accordingly. Not financial advice.
Indikator
von mustafaaydemir8816
1
Harmonic Periodicity Matrix [Pineify]Harmonic Periodicity Matrix — Multi-Cycle Stochastic Oscillator with Momentum Ribbon & Adaptive Signals The Harmonic Periodicity Matrix is an advanced cycle-detection oscillator that identifies market rhythm, momentum shifts, and high-probability reversal zones by harmonically combining three stochastic waves at different periodicities. Rather than relying on a single fixed lookback window — which inevitably misses cycles of differing durations — this indicator synthesizes a short-cycle , a primary-cycle , and a long-cycle stochastic into a single composite wave. The result is a smoother, more robust picture of where the market currently sits within its natural oscillation pattern. Key Features Three harmonically spaced stochastic cycles fused into one composite wave Weighted Moving Average (WMA) smoothing to reduce noise without excessive lag EMA-based signal line that generates precise momentum-crossover triggers Dynamic gradient coloring that visually encodes cycle strength and direction Momentum Ribbon fill between the cycle wave and signal line for at-a-glance bias confirmation Overbought / Oversold reference zones with subtle background shading Filtered Buy and Sell signals that fire only when reversals originate from extreme cycle territory How It Works At its core, the indicator computes three stochastic oscillators (%K) across three harmonically related lengths derived from a user-defined Primary Cycle Length : Short cycle — half the primary length ( cycleLen / 2 ), capturing fast intraday or shorter-term oscillations. Primary cycle — the user-defined length ( cycleLen ), representing the dominant market rhythm. Long cycle — 1.5× the primary length ( cycleLen × 1.5 ), anchoring the broader trend context. These three stochastic readings are averaged into a single composite cycle and then smoothed with a Weighted Moving Average (WMA) over the user-defined Smoothing Factor . Subtracting 50 centers the result around zero (range: −50 to +50), making overbought and oversold conditions immediately intuitive. A Signal Line — an EMA calculated over twice the smoothing period — acts as a lagging reference. Crossovers between the composite wave and the signal line mark momentum inflection points. Trading Ideas and Insights Zero-line crosses — When the composite wave crosses above 0, market momentum is transitioning bullish; below 0 signals bearish transition. Overbought / Oversold extremes — Readings above +25 indicate potential exhaustion; readings below −25 indicate potential recovery opportunity. Signal crossovers from extremes — The highest-conviction signals occur when the wave crosses the signal line while already in oversold (< −15, Buy) or overbought (> +15, Sell) territory. Momentum Ribbon color — A green ribbon confirms bullish momentum continuation; a red ribbon warns of bearish pressure even if price is still rising. How Multiple Indicators Work Together The power of the Harmonic Periodicity Matrix comes from the deliberate combination of three stochastic oscillators and two moving average types: The three stochastics represent different frequency bands of market activity — fast, medium, and slow. Averaging them suppresses random noise that would appear in any single stochastic while preserving genuine cyclical structure that repeats across all three timeframes simultaneously. The WMA smoothing is applied to the averaged cycle rather than to each individual stochastic. WMA front-weights recent data, keeping the smoothed line more responsive than a Simple Moving Average while avoiding the excessive lag of longer EMAs — the ideal balance for a cycle oscillator. The EMA signal line is computed over a longer period (2× the smoothing factor), intentionally lagging behind the main wave. This lag creates meaningful crossover events: when the faster composite wave crosses the slower signal line, it indicates a genuine shift in momentum rather than a transient fluctuation. The gradient coloring system encodes amplitude into color, providing an instant visual read of cycle intensity that raw numbers cannot convey. The background zone shading reinforces awareness of extreme readings without cluttering the visual space. Together, these components form a self-contained cycle analysis system: the three stochastics define the oscillation, the WMA refines it, the EMA signal line contextualizes momentum, and the visual layer communicates everything instantly. Unique Aspects Harmonic period spacing — Using 0.5×, 1×, and 1.5× ratios is inspired by harmonic analysis principles, where related frequencies reinforce true cyclical signals and cancel spurious noise. Amplitude-coded gradient — Color intensity scales with distance from zero (0→40 bullish, −40→0 bearish), making it easy to distinguish a mild rebound from a powerful trend. Filtered signals — Buy signals require the crossover to occur below −15; Sell signals require it above +15. This prevents signal generation in neutral mid-range territory where momentum reversals are statistically less reliable. Zero-centered display — Centering around 0 (rather than displaying 0–100) aligns naturally with how traders think about bullish vs. bearish bias. How to Use Add the indicator to any chart and timeframe. It plots in a separate panel below the price chart. Watch for green circles (Buy signals) — these appear when the cycle wave crosses up through the signal line from oversold territory (below −15). Watch for red circles (Sell signals) — these appear when the cycle wave crosses down through the signal line from overbought territory (above +15). Use the Momentum Ribbon fill color to confirm trend direction before entering trades. Pay attention to the overbought (+25) and oversold (−25) zones — readings beyond these thresholds suggest cycle exhaustion and potential reversal. Combine with price action or volume analysis for additional confirmation before executing trades. Customization Primary Cycle Length (default: 20) — Increase for longer-term swing cycle detection; decrease for faster, shorter-term cycle tracking. Smoothing Factor (default: 6) — Higher values produce a smoother wave with more lag; lower values are more reactive but noisier. Bullish Wave color — Default green (#089981); customizable. Bearish Wave color — Default red (#F23645); customizable. Equilibrium color — Default gray (#787b86); customizable. Conclusion The Harmonic Periodicity Matrix offers a methodologically grounded approach to market cycle analysis by combining multi-frequency stochastic decomposition, adaptive smoothing, and momentum-crossover detection into a single, visually intuitive oscillator. It is designed for traders who want more than a standard stochastic — those who seek to understand the rhythm of the market across multiple cycle lengths simultaneously. Whether you are swing trading, trend following, or timing entries within a larger move, this indicator provides a structured, repeatable framework for identifying when momentum is genuinely shifting versus when the market is simply oscillating in neutral territory.
Indikator
von Pineify
Spira Alligator This is an trend-following pullback system inspired by Bill Williams’ Alligator, but built to operate as a purely mechanical signal system. It’s designed for traders who want to: Follow the main trend Buy or sell on pullbacks back into the trend Use simple, visual logic without having to interpret too many “subtle” patterns How it works The Alligator lines (Lips, Teeth, Jaw) visualize trend direction and strength. A separate trend line (default EMA 144) is used as a long-term trend filter. The system detects a pullback back to the Teeth (Lips crosses once against the trend and then crosses back), but only when price is on the correct side of the trend line. When the conditions are met, it prints: A BUY signal when price is above the trend line A SELL signal when price is below the trend line How to use it Add Spira Alligator to TradingView and enable the line + signal display. Use BUY signals as candidate entries in an uptrend (price above the trend line). Use SELL signals as candidate entries in a downtrend (price below the trend line). Use the background color to quickly spot when an active signal event occurs. This logic is meant as a starting point—add your own risk management (stop-loss, take-profit, confluence with other indicators) as needed. Important notes This is not the classic Alligator approach, but a systematic variation that produces clear, mechanical signals. It’s made for testing and experimentation, and is especially suitable for trend-following traders who prefer simple but robust logic.
Indikator
von Spira_Scalper
HungMagic PRO V6🚀 HUNGMAGIC V6 PRO – M5 Indicator designed to help you overcome emotions while trading Are you still: ❌ Placing orders based on feelings? ❌ Not knowing where to set Stop Loss (SL) and Take Profit (TP)? ❌ Making a profit at TP1 only to lose? ❌ Unable to track your trading performance? 👉 HungMagic v6 Pro solves all of these problems. 🔥 CLEAR SIGNALS – NO AMBIGUITY EMA 9 & EMA 21 indicate trends Smart RSI noise filtering No blindly chasing tops or bottoms 💰 100% AUTOMATED ORDER MANAGEMENT ✔ Automatic Stop Loss calculation ✔ 3 clear Take Profit levels ✔ Pre-drawn Entry – Take Profit – Stop Loss levels on the chart ✔ Intuitive Risk zones You just need to follow the plan. 🛡️ AUTOMATIC SL MOVEMENT TO BREAK-EVEN Hit TP1 → SL automatically moves to Entry 💎 No more profit turning into loss 💎 No more regrets 📊 REAL-TIME STATISTICS DIRECTLY ON THE CHART Total signals How many times TP1 hit How many times TP3 hit How many times SL hit How many times break-even Trading requires data, not feelings. 🎯 Suitable for: Scalping M5 - M15 Intraday traders Those who want discipline and proper risk management ⚠ Not a “holy grail”. But a tool to help you trade systematically. 📩 Inbox to receive the indicator. Direct support for setting up the indicator
Indikator
von QuanKorea
Fractal Structure Model [Pro]Fractal Structure Model A professional-grade multi-timeframe price action indicator that automates the identification of expansion setups by analyzing lower timeframe movements within higher timeframe candle structures. <h 🔷 What This Indicator Does Markets move in fractal cycles — alternating between contraction (consolidation) and expansion (directional movement). This indicator detects the precise moment when expansion is likely to begin by combining: Higher Timeframe directional candle closures Lower Timeframe confirmation through Change in State of Delivery (CISD) Automated projection of future price targets Real-time setup tracking with success/failure detection ⚙️ Core Components 1. Automatic Timeframe Pairing The indicator intelligently pairs your chart timeframe with a higher timeframe for multi-timeframe analysis: 1min → 5min 3min → 15min 5min → 1Hour 15min → 4Hour 1Hour → Daily 4Hour → Weekly Manual override is available for custom pairings. The indicator validates pairings and displays warnings for invalid configurations. 2. HTF Power of Three (PO3) Candles Visualizes the higher timeframe candle directly on your lower timeframe chart: Translucent body box (open to close range) Wick lines extending to high and low Dashed open price reference line Timeframe badge label This allows you to observe how micro price action constructs the macro candle — identifying accumulation, manipulation, and distribution phases in real time. 3. Change in State of Delivery (CISD) The CISD is the confirmation signal that price has shifted from one directional bias to another. Bullish CISD Logic: text - Price was making lows (testing swing low area) - A candle closes above its open AND above the previous candle's high - This signals sellers have exhausted and buyers are taking control Bearish CISD Logic: text - Price was making highs (testing swing high area) - A candle closes below its open AND below the previous candle's low - This signals buyers have exhausted and sellers are taking control Visual: A highlighted box around the CISD candles with a directional label. Use Case: After the 1-Hour candle closes bullish, you watch the 5-minute chart for a bullish CISD near a swing low. When it triggers, it confirms that the new hour is likely to continue expanding upward. 4. Setup Detection A complete setup requires two conditions: Condition Description HTF Directional Close The previous HTF candle closed bullish or bearish LTF CISD Confirmation A change in delivery state occurs on the lower timeframe When both align, the indicator generates a setup signal with a bold vertical bar and a large directional label. Use Case: The previous 4-Hour candle closed strongly bearish. On your 15-minute chart, you see price briefly push up into a swing high, then a bearish CISD fires. The indicator marks this as a Bear Setup, telling you expansion to the downside is probable. 5. Candle Tracking (C1 through C4+) Once a setup triggers, the indicator tracks how many HTF candles have elapsed: Label Meaning Color C1 ✓ First candle — setup just formed Gray C2 ✓ Second candle — setup active and healthy Gray C3 ⚠ Third candle — potential slowdown/consolidation Orange C4 ⚠ Fourth candle — likely exhaustion Orange Any ✗ Price returned to setup origin — failure Red Failure Condition: Bullish setup fails if price drops below the setup low Bearish setup fails if price rises above the setup high Use Case: You entered a bullish trade on C1. By C2, price has expanded nicely. On C3, the label turns orange — you consider tightening your stop or taking partial profits because momentum may be fading. If it turns red, you know the setup has been invalidated. 6. Equilibrium + Premium/Discount Zones The Equilibrium (EQ) is the 50% level of the setup range (from setup high to setup low). Zone Location Meaning Premium Above EQ Price is expensive — favorable for shorts Discount Below EQ Price is cheap — favorable for longs Visual: Two shaded boxes with text labels ("PREMIUM" / "DISCOUNT") and a dashed EQ line. Use Case: After a bullish setup fires, price retraces. You see it enter the discount zone (below 50%). This is your optimal entry area — buying at a discount within a confirmed bullish structure. 7. T-Spot Identification The T-Spot marks where the higher timeframe candle's wick is anticipated to form — essentially a reversal or continuation point. Calculation: 23.6% from the setup extreme (based on Fibonacci-like proportioning of the range). Visual: A dotted line with a thin zone box and "T-SPOT" label. Use Case: In a bullish setup, the T-Spot sits near the top of the range. If price reaches this level and shows signs of rejection, it may indicate the HTF candle's high wick is forming — a potential point to take profits or expect a pullback. 8. Projection Levels Once a setup is confirmed, the indicator projects future price targets based on the range between the CISD price and the swing reference point. Default Projections: Level Calculation Purpose -1× 1× the CISD range First target — minimal expansion -2× 2× the CISD range Standard expansion target -2.5× 2.5× the CISD range Extended target -4× 4× the CISD range Full expansion -4.5× 4.5× the CISD range Maximum expected expansion Each projection has: A solid line at the level A thin zone box for visibility A multiplier label (e.g., "-2×") Progressive transparency (closer targets are more opaque) Use Case: A bearish setup fires. You set your take-profit at the -2× projection. If price reaches -2× and shows exhaustion, you exit. If momentum continues, you trail toward -4×. 9. Formation Liquidity Marks the previous HTF candle's high and low as critical liquidity levels. Visual: Dotted horizontal lines labeled "LIQ $.H" (high) and "LIQ $.L" (low). Use Case: Before a new setup forms, price often sweeps the previous candle's high or low to grab liquidity. Watching these levels helps you anticipate: Where stop losses are clustered Where engineered liquidity raids may occur Potential reversal points after the sweep 10. Candle 1 Liquidity Solid horizontal lines marking the setup's own high and low — the structural boundaries. Use Case: These are your invalidation levels. If a bullish setup's low is broken, the setup fails. These lines give you a clear visual reference for stop-loss placement. 11. Swing Structure Markers Small diamond symbols (◆) at detected swing highs and lows. Use Case: Helps you see the market's structural rhythm — where swing points form relative to the HTF candle. Useful for identifying when price is building higher lows (bullish) or lower highs (bearish). 12. Bias Selection Mode What It Shows Bullish Only bullish CISD signals and setups Bearish Only bearish CISD signals and setups Neutral Both directions Use Case: You've done your daily analysis and determined the market is in a bullish trend. You set bias to "Bullish" to filter out counter-trend bearish signals and focus exclusively on buy setups. 13. Time Filters Three configurable UTC time windows. Setups outside these windows are ignored. Example Configuration: Session 1: 08:00 - 11:00 (London Open) Session 2: 13:00 - 16:00 (New York Open) Session 3: OFF Use Case: You only want to trade during London and New York sessions because that's when the most volume and expansion occurs. The indicator automatically suppresses signals during Asia session or off-hours. 14. Professional Info Table A dark-themed dashboard showing: Field Example Value Pairing 5 → 60 Status ✓ Valid Bias ▲ Bullish Setup ▲ Bull C2 Auto TF ● Enabled Sessions 8:00-11:00 13:00-16:00 Total 12 setups 15. Alerts Alert Trigger Bullish Fractal Setup Full bullish setup confirmed Bearish Fractal Setup Full bearish setup confirmed Bullish CISD Bullish delivery change detected Bearish CISD Bearish delivery change detected Setup Failed Active setup invalidated Trading Workflow — Complete Use Case Scenario: Trading EUR/USD on the 5-Minute Chart Step 1 — Preparation - Open 5min chart - Indicator auto-pairs to 1H HTF - Set bias to "Neutral" - Enable London + NY time filters Step 2 — Wait for HTF Context - Watch the PO3 candle building the current hour - Previous 1H candle closed bullish - Current hour opens → you watch for a pullback Step 3 — CISD Confirmation - Price pulls back to a 5min swing low - A 5min candle closes above its open and above the prior high - CISD marker appears → Bullish Setup triggers - Labels, projections, EQ zones all appear automatically Step 4 — Entry - Price is in the DISCOUNT zone (below EQ) - Enter long near the CISD level - Stop loss below the C1 Liquidity low line Step 5 — Management - C1 label shows ✓ — setup is fresh - Price reaches -1× projection → move stop to breakeven - C2 label appears ✓ — momentum continues - Price hits -2× projection → take 50% profit - C3 label turns orange ⚠ — trail stop tightly - Price reaches -2.5× → close remaining position Step 6 — Failure Scenario - If price drops below setup low before hitting targets - C2 label turns red ✗ - Projections, EQ, T-Spot all disappear - You exit the trade at your stop loss Who Is This Indicator For? Trader Type How They Use It Day Traders 1min/5min charts paired with 15min/1H for intraday setups Swing Traders 15min/1H charts paired with 4H/Daily for multi-day holds Scalpers 1min charts paired with 5min for quick expansion trades Analysts Use projections and structure labels for market commentary Key Strengths Non-repainting — levels remain stable once plotted Fully automated — no manual drawing required Multi-asset — works on forex, crypto, stocks, indices, commodities Adaptive — auto-adjusts to any timeframe Professional visuals — clean, institutional-grade appearance with black text on colored labels for maximum readability
Indikator
von ZakAlgoTrade
5
Correlation Heatmap with Relative StrengthWhy the error happened: In Pine Script, strings are joined using +. My previous draft had a typo that looked like standard1 - "-" + standard2. The compiler saw the minus sign (-) and tried to do math on words, which is like trying to subtract "Apple" from "Banana." Replacing it with standard1 + "-" + standard2 fixes the ticker ID generation. Would you like me to add a tooltip that explains how to read the Pearson correlation values for anyone who downloads your script?
Indikator
von hp_gerry2020
Kimi Screener LiteStep 1: Verify the Original Works Go to your Screener Look at which indicator is selected in the filter dropdown If it says "Kimi Claw Pro" - that's the original (the one with MTF calls that times out on many symbols but works on some) Step 2: Properly Add the New Script The new script MUST be: Saved (Ctrl+S) Added to a chart (Click "Add to chart" button) Then published (Click "Publish script" → Save privately) Then selected in screener Step 3: Check the Screener Dropdown In your screener, click the indicator dropdown. You should see: ❌ "kimi claw screener" (if not published properly - won't work) ✅ "Kimi Claw Screener" (if published - will work) Alternative: Just Use the Ori
Indikator
von zerounderscore
W%R Midline Cross - AI Alert ModeStrategy Overview This system combines: Williams %R (momentum exhaustion + midline cross) Weighted Moving Average (WMA 50) (trend filter) Average True Range (ATR) (volatility regime) AI-style scoring filter for higher-quality entries It is a mean-reversion to trend continuation hybrid system: Price becomes extremely overbought/oversold Momentum resets through the -50 midline Trend + volatility conditions confirm Signal triggers on candle close
Indikator
von souavue
Piv X**Title:** Piv X: Confluence-Based Market Structure & Volume Analyzer **Introduction** Piv X is a comprehensive market structure analysis tool designed to grade the quality of Pivot Points using a composite "Confluence Score." Unlike standard indicators that simply identify local highs and lows based on price alone, this script evaluates the *strength* of every pivot by cross-referencing it against volume data, momentum divergences, multi-timeframe structure, and institutional key levels. **Concept & Methodology** The core functionality of this script builds upon a **Dynamic Pivot Quality Scoring System**. When a pivot point is detected (using an ATR-based dynamic lookback), the script runs a background analysis on 10+ technical factors to assign a "Confluence Score" (0-100). The score is calculated based on the accumulation of the following factors: 1. **Volume Anomalies**: Detects volume spikes at the pivot, suggesting institutional participation. 2. **Momentum Divergence**: Checks for RSI and Williams %R divergences relative to price action to identify exhaustion. 3. **Liquidity Mechanics**: Identifies "Swing Failure Patterns" (SFP) and "Sweeps" where price pierces a previous structure but closes back inside. 4. **Multi-Timeframe Alignment**: Verifies if the pivot aligns with Higher Timeframe (HTF) trends and structures to filter out counter-trend noise. 5. **Key Level Interaction**: Rewards pivots that form near Daily/Weekly Highs or Lows. 6. **Fair Value Gap (FVG) Fills**: Detects if the pivot is reacting to a market imbalance fill. **Unique Feature: Williams %R Divergence Anchored VWAP** This tool introduces a logic-driven Anchored VWAP. Instead of arbitrarily anchoring VWAPs to high/low dates, the script automatically anchors a VWAP from the exact candle where a Williams %R Momentum Divergence is confirmed. This allows traders to visualize the "true cost basis" of participants who entered specifically on the momentum reversal signal. **How to Use** 1. **Golden Zones (High Confluence)**: Pivots that achieve a high Confluence Score (e.g., >80) are highlighted with a distinct "Golden" border and background. These represent high-probability Support/Resistance levels backed by multiple forms of technical evidence. 2. **Standard Zones (Normal Confluence)**: Pivots with moderate scores are shown in standard Green/Purple. These are valid structure points but may require additional confirmation before trading. 3. **Trend Filtering**: The "Trend System" overlay (using EMA Clouds and RSI filters) provides visual context for the dominant trend direction, helping traders avoid taking structure signals against the main flow. 4. **Market Structure Shifts (MSS)**: The script automatically plots CHoCH (Change of Character) lines to alert traders when the sequence of Higher Highs or Lower Lows has been broken, often signaling a trend reversal. **Settings** * **Pivot Detection**: Adjust the ATR Multiplier to control the sensitivity of pivot detection. * **Filters**: Toggle specific scoring factors (like Session Logic or HTF Confluence) to customize how strict the Scoring System is. * **Visuals**: Enable/Disable specific VWAP periods (Weekly, Monthly, Yearly) to keep the chart clean. **Disclaimer** This tool is intended for market analysis and educational purposes only. Past performance of these setups does not guarantee future results.
Indikator
von RickyTSpanish