Chaufer-Engine Pro

Chaufer-Engine Pro — ORB/ARB · EMA · VWAP · Liquidity

Four independent intraday signal engines in one overlay, sharing a single confluence core (VWAP / Volume / RSI / ADX / ATR) so nothing is calculated twice. Every engine can be toggled on/off, and all signals confirm on closed bars (non-repainting).

The four engines

① ORB/ARB — Opening-Range and Afternoon-Range breakouts with 2-candle confirmation, graded A/B/C by confluence, plus rejection reversions back inside the range edges.
② EMA Pullback + Continuation — In an established 9/20/50 trend, waits for a pullback into the fast EMA then a break-of-structure to fire a continuation entry.
③ VWAP Reversal — Touch-and-reverse off VWAP with same-colour confirmation, an advancing reference candle, and a cooldown so you don't get back-to-back same-direction signals.
④ Liquidity Sweeps — Wick-through-then-close-back stop-runs of key levels (PDH/PDL, PDC, PMH/PML, OR, ARB, weekly, equal highs/lows). A single ⚡ label names the swept level; a sweep above = bearish hint, below = bullish hint.

Plus a Key Levels overlay (independent of the engines): PDH/PDL, PMH/PML, session Open, Weekly H/L (previous week on Monday) and OR/ARB — each drawn as a labelled line for the current session, or the previous active day on nights/weekends/holidays.

How to use

Add to an intraday chart — best on 1m–5m so the opening range has enough bars.
Confirm the Session and Timezone inputs match your market (default 0930–1600, America/New_York). Enable Extended Hours on the chart if you want premarket (PMH/PML) levels.
In Master Toggles, turn on only the engines you trade. ④ Liquidity is off by default.
Tune the Confluence Core (VWAP/Vol/RSI/ADX). Use "Require full confluence" and "Suppress grade-C" to keep only the highest-quality breakouts.
Read signals:
- ▲/▼ A/B/C = ORB/ARB breakout (letter = confluence grade; hover for the reason).
- Rev ↑/↓ = range-edge rejection reversion.
- Circles = EMA continuation. V triangles = VWAP reversal. ⚡ = liquidity sweep.
Watch the status table (top-right) for engine states and current bias.
Set alerts from any of the built-in alertconditions (one per signal type).

Notes

Signals are non-repainting (confirmed on bar close); the OR box only extends for the first 2 hours (configurable), then freezes.
This is an analysis tool, not financial advice — combine with your own risk management.

Catatan Rilis

Update chart

Catatan Rilis

New inputs (group: "MTF RSI / MACD Table")

MTF RSI Length (14), RSI Overbought (70), RSI Oversold (30)
MACD Fast/Slow/Signal (12 / 26 / 9)
5 timeframe slots, each with an on/off toggle — defaults 5, 15, 60, 240, D
"Show Status Table" toggle renamed to "Show MTF RSI / MACD Table"

Table layout (4 columns × per-TF rows + summary)

Col Shows
TF timeframe label
RSI value + OB/OS tag; red=overbought, green=oversold, else green/red tint by the 50 midline
MACD arrow zone cross momo
Bias combined RSI+MACD verdict: BULL / BEAR / MIX

MACD cell decoding (▲>0 ⤳↑ +)

▲ / ▼ — MACD line above / below signal line
>0 / <0 — MACD line vs zero line (momentum regime)
⤳↑ / ⤳↓ — fresh cross this bar
+ / − — histogram expanding / contracting
Color = conviction: bright when the cross/state agrees with the zero-line side (continuation), dim when it fights it (early reversal)

Bias column

BULL = RSI ≥ 50 and MACD above signal (bright if also above zero)
BEAR = RSI ≤ 50 and MACD below signal (bright if also below zero)
MIX = the two disagree (gray)

ALIGN summary row (bottom)

Counts enabled timeframes agreeing bull (▲) vs bear (▼) and gives a majority verdict (BULL / BEAR / MIX) — full alignment vs conflict at a glance.

Removed

Old dashboard rows (engine ON/off states + single-TF Bias). No signal-engine logic, alerts, key levels, or drawings were touched.

Catatan Rilis

MACD cell now shows the "distance from zero" as a momentum-strength tag.

New cell format: ▲>0 ⤳↑ + S

The last token is strength = |MACD line| / ATR on that timeframe, so it's normalized to each timeframe's own volatility (comparable across 5m and Daily):

S (strong) — MACD line ≥ MACD Strong ATR-units from zero → mature, powerful momentum (but also more extended)
m (mid) — moderate momentum
w (weak) — MACD line hugging zero → weak / transitioning (early or choppy)

New inputs (in "MTF RSI / MACD Table" group):

MACD Strong (|line|/ATR ≥) — default 0.60
MACD Mid (|line|/ATR ≥) — default 0.25

How to read it together: a fresh cross ⤳↑ at >0 with + (expanding) and m strength is a healthy continuation with room to run; a ⤳↑ showing S (already strong/extended) warns the move may be late; a w near zero flags whipsaw risk.

Tune the two thresholds to your instrument — if everything reads S, raise them; if everything reads w, lower them.

Catatan Rilis

VWAP Break logic tuned

Catatan Rilis

updated VWAP reasoning

Catatan Rilis

The on-chart verdict is now a compact floating label pinned beside the live candle — just the call and an arrow:

GO ▲ / GO ▼ (green long / red short) — clean setup, momentum quality confirmed
WAIT • (amber) — right direction, but momentum not yet expanding
NO • (gray) — no clean setup / timeframes disagree

Hover the label for a plain-English tooltip explaining the direction (LONG=calls / SHORT=puts), which timeframe is your trigger, whether its momentum is quality-confirmed or weak/fading, the strength (STRONG/moderate/weak), and how many timeframes are aligned vs. the minimum needed.

How to read the label - Think of the three states as one continuous position lifecycle:

State Action
GO ▲/▼ Enter in the arrow's direction (calls on ▲, puts on ▼)
WAIT • Hold — momentum is pausing, not reversing; stay in the trade
NO • Exit — setup is gone, close the position

In short: Enter on GO → keep holding through any number of WAITs → close the moment it flips to NO.

WAIT is a "catch your breath" state, not an exit signal — it just means the entry timeframe's momentum isn't currently expanding, which is normal mid-trend. Only NO (alignment lost or trigger momentum gone) tells you the reason you entered is no longer valid, so that's your close trigger.

One caveat for options specifically: because you're holding through WAIT, keep an eye on theta/IV on longer pauses — the signal logic is momentum-based and doesn't account for premium decay.

Catatan Rilis

updated

Catatan Rilis

Signal generation restricted to session selection - default is NY Session

Skrip open-source

Dengan semangat TradingView yang sesungguhnya, pembuat skrip ini telah menjadikannya sebagai sumber terbuka, sehingga para trader dapat meninjau dan memverifikasi fungsinya. Salut untuk penulisnya! Meskipun Anda dapat menggunakannya secara gratis, perlu diingat bahwa penerbitan ulang kode ini tunduk pada Tata Tertib kami.

girishtradesltx

Pernyataan Penyangkalan

Informasi dan publikasi ini tidak dimaksudkan, dan bukan merupakan, saran atau rekomendasi keuangan, investasi, trading, atau jenis lainnya yang diberikan atau didukung oleh TradingView. Baca selengkapnya di Ketentuan Penggunaan.

Skrip open-source

girishtradesltx