OPEN-SOURCE SCRIPT
SMT Divergence Matrix [JOAT]
════════════════════════════════
SMT DIVERGENCE MATRIX [JOAT]
════════════════════════════════
Smart Money Technique divergence, automated. This tool watches your chart symbol against up to two correlated reference assets and flags the moment they disagree at a swing — the classic footprint of one market failing to confirm another. When your chart carves a new low that a correlated market refuses to match, that non-confirmation is highlighted as a potential turn.
▎ WHAT IT DOES
It compares swing highs and lows on your chart to the same swings on two reference instruments and looks for SMT divergence — where the assets normally move together but split at a pivot. Each qualifying event is drawn as a connector line between the two chart pivots, tagged with a BUY or SELL pill, and paired with an optional ATR-based stop and target zone. A dashboard reports live correlation, structure, and which reference triggered.
▎ HOW IT WORKS
• Swing detection — confirmed pivot highs and lows are located on the chart using a configurable left/right pivot length. Larger values isolate more significant swings.
• Reference sync — the same high/low/close series are pulled for up to two reference assets on your chart's timeframe, guarded against invalid symbols.
• Bullish SMT — the chart prints a lower low while a correlated reference prints a higher low. That failure to confirm the downside is read as bullish non-confirmation.
• Bearish SMT — the chart prints a higher high while a correlated reference prints a lower high, reading as bearish non-confirmation.
• Either reference can trigger — a signal fires from whichever asset fails to confirm; the dashboard shows REF1, REF2, or both.
• Correlation filter — rolling correlation between chart and reference is measured over a lookback. SMT only makes sense when assets normally track together, so signals can be restricted to references whose correlation is currently at or above a minimum.
• Confirmation filter — the triggering bar can be gated by RSI momentum turning in the signal direction, by a directional candle close, by both, or by nothing.
• Cooldown — a minimum bar gap between same-direction signals prevents clustering, and the engine never fires a buy and sell on the same bar.
• Trade zones — on each signal, entry is taken at the close, stop is placed a chosen ATR multiple away, and the target is projected at your risk/reward ratio. The zones live-extend to the right each bar and freeze the moment price touches the stop or target.
▎ HOW TO USE IT
• Set Reference Asset 1 and 2 to instruments that genuinely correlate with your chart (index futures, sector peers, a lead/lag pair). The technique is only meaningful when the assets normally move together.
• A BUY pill below price marks bullish non-confirmation; a SELL pill above price marks bearish non-confirmation. The pill text names the reference that triggered.
• The divergence line connects the two chart pivots involved, so you can see the exact swings being compared.
• Treat the red zone as risk (entry-to-stop) and the blue/violet zone as reward (entry-to-target). Use them as a visual framework, not a mechanical order.
• Combine signals with your own read of market structure, session timing, and key levels rather than trading them in isolation.
▎ KEY SETTINGS
• Engine — swing pivot length, the two reference symbols and their enable toggles, and correlation lookback.
• Filters — confirmation mode (None / RSI / Candle / Both), RSI length, positive-correlation requirement with a minimum threshold, and signal cooldown.
• Trade Model — show ATR SL/TP toggle, ATR length, stop distance in ATR multiples, risk/reward target, and a cap on drawn setups for performance.
• Visuals — divergence lines, signal labels, pivot markers, label size, custom bull/bear colors, an optional candle zone-reader, and a session VWAP with ±σ bands.
• Dashboard — show toggle, position, and text size.
▎ DASHBOARD
The panel reports correlation state and value for each reference (Strong+, Positive, Weak, Negative, Strong−, or OFF), the last SMT side with the triggering reference, current market structure (HH / HL / LH / LL), running bull/bear counts, total divergences, live signal status, and current ATR.
▎ ALERTS
• Bullish SMT — chart lower low versus a correlated higher low.
• Bearish SMT — chart higher high versus a correlated lower high.
Both include ticker and interval placeholders in the message.
▎ NOTES
• Works on any symbol and any timeframe; references are read on the chart's own timeframe.
• Signals are based on confirmed pivots, which require the configured right-side bars to close before a swing is validated.
• Colored candles and VWAP bands are off by default for a clean chart, and the drawn-setup cap keeps performance stable.
• Reference data uses non-lookahead requests and tolerates invalid symbols without breaking the script.
For research and education only. This is not financial advice. No indicator predicts the future, on-chart signals and counts are illustrative of historical behavior only, and past behavior does not guarantee future results. Always manage your own risk.
Made with passion by JackOfAllTrades ⚡
SMT DIVERGENCE MATRIX [JOAT]
════════════════════════════════
Smart Money Technique divergence, automated. This tool watches your chart symbol against up to two correlated reference assets and flags the moment they disagree at a swing — the classic footprint of one market failing to confirm another. When your chart carves a new low that a correlated market refuses to match, that non-confirmation is highlighted as a potential turn.
▎ WHAT IT DOES
It compares swing highs and lows on your chart to the same swings on two reference instruments and looks for SMT divergence — where the assets normally move together but split at a pivot. Each qualifying event is drawn as a connector line between the two chart pivots, tagged with a BUY or SELL pill, and paired with an optional ATR-based stop and target zone. A dashboard reports live correlation, structure, and which reference triggered.
▎ HOW IT WORKS
• Swing detection — confirmed pivot highs and lows are located on the chart using a configurable left/right pivot length. Larger values isolate more significant swings.
• Reference sync — the same high/low/close series are pulled for up to two reference assets on your chart's timeframe, guarded against invalid symbols.
• Bullish SMT — the chart prints a lower low while a correlated reference prints a higher low. That failure to confirm the downside is read as bullish non-confirmation.
• Bearish SMT — the chart prints a higher high while a correlated reference prints a lower high, reading as bearish non-confirmation.
• Either reference can trigger — a signal fires from whichever asset fails to confirm; the dashboard shows REF1, REF2, or both.
• Correlation filter — rolling correlation between chart and reference is measured over a lookback. SMT only makes sense when assets normally track together, so signals can be restricted to references whose correlation is currently at or above a minimum.
• Confirmation filter — the triggering bar can be gated by RSI momentum turning in the signal direction, by a directional candle close, by both, or by nothing.
• Cooldown — a minimum bar gap between same-direction signals prevents clustering, and the engine never fires a buy and sell on the same bar.
• Trade zones — on each signal, entry is taken at the close, stop is placed a chosen ATR multiple away, and the target is projected at your risk/reward ratio. The zones live-extend to the right each bar and freeze the moment price touches the stop or target.
▎ HOW TO USE IT
• Set Reference Asset 1 and 2 to instruments that genuinely correlate with your chart (index futures, sector peers, a lead/lag pair). The technique is only meaningful when the assets normally move together.
• A BUY pill below price marks bullish non-confirmation; a SELL pill above price marks bearish non-confirmation. The pill text names the reference that triggered.
• The divergence line connects the two chart pivots involved, so you can see the exact swings being compared.
• Treat the red zone as risk (entry-to-stop) and the blue/violet zone as reward (entry-to-target). Use them as a visual framework, not a mechanical order.
• Combine signals with your own read of market structure, session timing, and key levels rather than trading them in isolation.
▎ KEY SETTINGS
• Engine — swing pivot length, the two reference symbols and their enable toggles, and correlation lookback.
• Filters — confirmation mode (None / RSI / Candle / Both), RSI length, positive-correlation requirement with a minimum threshold, and signal cooldown.
• Trade Model — show ATR SL/TP toggle, ATR length, stop distance in ATR multiples, risk/reward target, and a cap on drawn setups for performance.
• Visuals — divergence lines, signal labels, pivot markers, label size, custom bull/bear colors, an optional candle zone-reader, and a session VWAP with ±σ bands.
• Dashboard — show toggle, position, and text size.
▎ DASHBOARD
The panel reports correlation state and value for each reference (Strong+, Positive, Weak, Negative, Strong−, or OFF), the last SMT side with the triggering reference, current market structure (HH / HL / LH / LL), running bull/bear counts, total divergences, live signal status, and current ATR.
▎ ALERTS
• Bullish SMT — chart lower low versus a correlated higher low.
• Bearish SMT — chart higher high versus a correlated lower high.
Both include ticker and interval placeholders in the message.
▎ NOTES
• Works on any symbol and any timeframe; references are read on the chart's own timeframe.
• Signals are based on confirmed pivots, which require the configured right-side bars to close before a swing is validated.
• Colored candles and VWAP bands are off by default for a clean chart, and the drawn-setup cap keeps performance stable.
• Reference data uses non-lookahead requests and tolerates invalid symbols without breaking the script.
For research and education only. This is not financial advice. No indicator predicts the future, on-chart signals and counts are illustrative of historical behavior only, and past behavior does not guarantee future results. Always manage your own risk.
Made with passion by JackOfAllTrades ⚡
סקריפט קוד פתוח
ברוח האמיתית של TradingView, יוצר הסקריפט הזה הפך אותו לקוד פתוח, כך שסוחרים יוכלו לעיין בו ולאמת את פעולתו. כל הכבוד למחבר! אמנם ניתן להשתמש בו בחינם, אך זכור כי פרסום חוזר של הקוד כפוף ל־כללי הבית שלנו.
The Institutional Grade Trading Ecosystem, Built to win trades 📈
Get Access 👇
jackofalltrades.vip 🌐
t.me/jackofalltradesvip 🃏
Get Access 👇
jackofalltrades.vip 🌐
t.me/jackofalltradesvip 🃏
כתב ויתור
המידע והפרסומים אינם מיועדים להיות, ואינם מהווים, ייעוץ או המלצה פיננסית, השקעתית, מסחרית או מכל סוג אחר המסופקת או מאושרת על ידי TradingView. קרא עוד ב־תנאי השימוש.
סקריפט קוד פתוח
ברוח האמיתית של TradingView, יוצר הסקריפט הזה הפך אותו לקוד פתוח, כך שסוחרים יוכלו לעיין בו ולאמת את פעולתו. כל הכבוד למחבר! אמנם ניתן להשתמש בו בחינם, אך זכור כי פרסום חוזר של הקוד כפוף ל־כללי הבית שלנו.
The Institutional Grade Trading Ecosystem, Built to win trades 📈
Get Access 👇
jackofalltrades.vip 🌐
t.me/jackofalltradesvip 🃏
Get Access 👇
jackofalltrades.vip 🌐
t.me/jackofalltradesvip 🃏
כתב ויתור
המידע והפרסומים אינם מיועדים להיות, ואינם מהווים, ייעוץ או המלצה פיננסית, השקעתית, מסחרית או מכל סוג אחר המסופקת או מאושרת על ידי TradingView. קרא עוד ב־תנאי השימוש.