Get started

Fibonacci Retracement

ZigZag Multi Time Frame with Fibonacci RetracementHello Traders, This is ZigZag Multi Time Frame with Fibonacci Retracement script. It calculates the ZigZag using Higher Time Frame, draw Fibonacci Retracement lines and put labels accordingly. I already published Zigzag with Fibonacci Levels script but this one is Multi Time Frame and I didn't want to change/update it. You can set ZigZag Period and Resolution as you wish. Zigzag is calculated using higher time frames (ex: 1day) so you better choose small numbers as Zigzag Period, such 2, 3 etc. you should choose higher time frame wisely, meaning that you should not set 1Day while chart resolution is 1min ;) It draws Fibonacci levels between 0%-100% and If the price goes higher/lower than 100% level than the script draws Fibonacci Levels accordingly. This means it draws Fibonacci levels until this levels get higher/lower than the price. "Show Zig Zag" is not enabled by default, you can enable it if you want to see ZigZag as well. You have options to set Text Color, Line Color, Zigzag Up Color and Zigzag Down Color. You can set the location of the Fibonnaci Levels -> Left or Right You also have option to enable/disable following Fibonnaci Levels: ---> 0.236 ---> 0.382 ---> 0.500 ---> 0.618 ---> 0.786 I added "Colorful Fibonacci Levels" for fun. if you enable it then Fibonacci line colors will be different randomly on each move, see it for yourself :) Some Screenshots: if you enable "Show Zigzag Option": how the script adjust levels automatically: if you set Label Location as "Right": if you enable "Colorful Fibonacci Levels" then Line colors will be changed on each move randomly ;) Enjoy!
Indicator
by LonesomeTheBlue
98
Beacon - Anthony Crudele's IndicatorBeacon uses the current volatility of the market based on your trading time frame to determine support and resistance levels, whether a trend is intact or ready to revert back in the range. One of the most difficult things I went through as a trader was determining whether we are in a trend day or if we are in grind up or grind down mode. I created Beacon to give me a simple look at the market to determine what type of environment we are in. I use Bollinger Bands (3 standard deviation) to determine the volatility cycle. Once the BB make peaks I took my Fibonacci Retracement tool and did a retracement from the peak high of the BB to the peak low. I use 70%, 50% and 30% for my support and resistance levels. I use those levels because I tested pretty much every percent level and those percentages averaged the highest performance on all tick charts and time charts. You can use Beacon on whatever time frame or tick chart you are trading on and it will determine that specific volatility cycle.
Indicator
by anthonycrudele
17
Tweezers and Kangaroo TailHello Traders, Here Tweezers and Kangaroo Tail script is in your service. The script searches for Tweezer / Kangaroo Tail candlestick patterns and shows them as T (Tweezer) and K (Kangaroo Tail). Thanks to RorschachT who game me the idea and some details while working on this script. What are these candlestick patterns? Tweezers : - A tweezers pattern occurs when the highs/Lows of two candlesticks occur at almost exactly the same level - Both candles must have wicks - Bigger Wick / Smaller Wick rate should not be greater than 150% ( 150% by default and you have option to change it) - First Candle must be highest/lowest for last 5 candles (5 by default and you have option to change it) - The level of High for Top, Low for Bottom must be almost lower than 20% of the bigger wick of tweezer candles (20% by default and you have option to change it) - The Candles can be right next to each other or apart but not more than 12 candles apart (12 by default and you have option to change it) - You will see that Tweezers pattern occurs frequently Kangaroo Tail: - Looks almost like a Hammer or Inverted Hammer candle - They have both its open and close in the top or bottom third of the candle - There must be some space/room on the left of the kangaroo tail - The open and close of the Kangaroo Tail candle must be inside the range of the previous candlestick - The next candle should create a new high or new low - You have several options to set details about the "Room" that should be on the left and also options for Wick/Body rates - You can see example below You have option to enable/disable any of these patterns. as far as I have tested they are strong reversal patterns but none of the indicators or patterns may not be enough alone. so you should confirm the signals using other indicators or tools If you need more information you can find a lot of info on the net ;) Example: Tweezers - Aparted Example: Kangaroo Tail - Bullish Enjoy!
Indicator
by LonesomeTheBlue
45
HeikinAshi Fibonacci Retracement v2It draws Fib retracements based on the highest high measured when HeikinAshi candles are green, and lows based on when HeikinAshi candles are red. The idea is that you can see the fib retracements based on HeikinAshi trends on a larger timeframe to help trade in smaller timeframes. for v2 I reset the fib trace when a new high is set and also at the second green heikin candle. And I only show the last 20 bars of fib lines to avoid confusion and focus on the current trade. Happy trading!
Indicator
by FreeReveller
Divergence for Many Indicators v4Hello Traders, Here is my new year gift for the community, Digergence for Many Indicators v4 . I tried to make it modular and readable as much as I can. Thanks to Pine Team for improving Pine Platform all the time! How it works? - On each candle it checks divergences between current and any of last 16 Pivot Points for the indicators. - it search divergence on choisen indicators => RSI , MACD , MACD Histogram, Stochastic , CCI , Momentum, OBV, VWMACD, CMF and any External Indicator ! - it checks following divergences for 16 pivot points that is in last 100 bars for each Indicator. --> Regular Positive Digergences --> Regular Negative Digergences --> Hidden Positive Digergences --> Hidden Negative Digergences - for positive divergences first it checks if closing price is higher than last closing price and indicator value is higher than perious value, then start searching divergence - for negative divergences first it checks if closing price is lower than last closing price and indicator value is lower than perious value, then start searching divergence Some Options: Pivot Period: you set Pivot Period as you wish. you can see Pivot Points using "Show Pivot Points" option Source for Pivot Points: you can use Close or High/Low as source Divergence Type: you can choose Divergence type to be shown => "Regular", "Hidden", "Regular/Hidden" Show Indicator Names: you have different options to show indicator names => "Full", "First Letter", "Don't Show" Show Divergence Number: option to see number of indicators which has Divergence Show Only Last Divergence : if you enable this option then it shows only last Positive and Negative Divergences you can include any External Indicator to see if there is divergence - enable "Check External Indicator" - and then choose External indicator name in the list, "External Indicator" - External indicator name is shown as Extrn - related external indicator must be added before enabling this option Coloring, line width and line style options for different type of divergences. Following Alerts added: - Positive Regular Divergence Detected - Negative Regular Divergence Detected - Positive Hidden Divergence Detected - Negative Hidden Divergence Detected Now lets see some examples: Hidden Divergences: Regular and Hidden Divergences together: Showing first letters of indicators: You can see only the number of indicators which has divergence: You can see only divergence lines without indicators names and numbers: option to used different label/line/text colors: You have option to see only last divergences: You can change Pivot Period, in following example Pivot Period = 15: You can use Close or High/Low as Source for Divergence You can include external indicators and get divergences on it: Wish you all a happy new year! Enjoy!
Indicator
by LonesomeTheBlue
731
User-Inputed Time Range & FibsGreetings Traders! I have decided to release a few scripts as open-source as I'm sure others can benefit from them and perhaps make them better.(Be sure to check my Profile for the other scripts as well: www.tradingview.com). This one is called User-Inputed Time Range & Fibs. The idea behind this script is to record the Range Highs and Lows of a User Defined Period, and plot potential Targets based on either Fibonacci Extensions or a Multiple of the Range Size. I created this originally for use with the US Session Initial Balance(From 9:30-10:30AM EST), however it can be set to any time period. What is Initial Balance? In simple words, Initial Balance (IB) is the price data, which are formed during the first hour of a trading session. Activity of traders forms the so-called Initial Balance at this time. This concept was introduced for the first time by Peter Steidlmayer when he presented the market profile to traders(atas.net). The IB is monitored as a break-out area for Range Extension traders. The IB High is also seen as an area of resistance and the IB Low as an area of support until it is broken(www.mypivots.com). As a note, depending on the Time Zone you are in, you may need to manually add or subtract from the Timed Range to match the desired Time. For example in NY Eastern Time, I have to use 8:30-9:30AM to Capture the 9:30-10-30AM IB for ES and NQ. Similarly, I must use 14:30-15:30PM to Capture the 9:30-10-30AM IB for BTC. You will need to make adjustments based on the Time Zone you are located in. I wanted to give a Special Thanks to @PineCoders for the Custom Rounding Function from Backtesting/Trading Engine--> (), Pinecoders.com for help with Tracking the Highs/Lows--> (www.pinecoders.com), and @TradeChartist for allowing me to use some of the code for the Fibonacci Extensions from his script here--> (). If you like User-Inputed Time Range & Fibs, be sure to Like, Follow, and if you have any questions, don't be afraid to drop a comment below.
Indicator
by DrCatherineHalsey
13
ZigZag with Fibonacci LevelsHello Traders, This is " ZigZag with Fibonacci Levels " script. It finds the ZigZag, draw Fibonacci lines and put labels accordingly. I get many requests for this script, so here it is. You can set ZigZag period as you wish. Bigger numbers (such 20, 30) may give better perspective and result. It draws Fibonacci levels between 0%-100% and If the price goes higher/lower than 100% level than the script draws Fibonacci Levels accordingly. This means it draws Fibonacci levels until this levels get higher/lower than the price. As an example: if you don't want to see ZigZag Lines then you have option to disable it and see only Fibonacci levels: You have coloring options for Zigzag, Fibonacci lines and texts: Enjoy!
Indicator
by LonesomeTheBlue
72
[JRL] MM FibonacciThis is a new indicator that uses Murrey Math formulas to find the tops and bottoms, then uses those tops and bottoms to draw long-term fibonacci retracement levels. The genius of Murrey was his geometric formulas to calculate the right place to start plotting the lines, but I think the fibonacci ratios typically seem more accurate than the MM line ratios. So in this script I attempt to take the best of each and combine them into a new, superior indicator. Let me know in the comments if you find this useful. Cheers!
Indicator
by JRL_6
62
Automatic FibonacciFibonacci retracements are popular among technical traders. In technical analysis, a Fibonacci retracement is created by taking two extreme points (usually a peak and a trough) on a stock chart and dividing the vertical distance by the key Fibonacci ratios of 23.6%, 38.2%, 50%, 61.8%, and 100%. Basic fibo levels are often known to be 14.6%, 23.6%, 38.2%, 50%, 61.8%, 76.4%, 88.6% and 100%. This indicator will draw the fibonacci levels automatically. Once these levels are identified, horizontal lines are drawn and used to identify possible support and resistance levels including zones. The fibo levels on this indicator gives you the option to use basic fibo or new paradigm fibo levels. New paradigm fibo levels may be new to most traders, however, the application of new paradigm fibo does allow one to trade with least risk due to the precision of the price action surrounding the fibo levels and zones. One of the most efficient and great ways to apply this auto fibo indicator and the new paradigm fibo is by only leaving the fibo levels that do have hits and un-selecting the fibo levels that do not have any. You can further remove any other levels so you can trade the zones that these fibo levels create. In addition, you can also switch the timeframe of the fibo from 1D to different number of days to 1W.
Indicator
by TradersParadigm
2
RSI Tops and BottomsHello Traders This script finds Tops when RSI is in overbought area or Bottoms when RSI is in oversold area and checks the divergence between them. it checks divergence at tops/bottoms after RSI exited from OB/OS areas. You can change overbought / oversold levels. You can limit the time that RSI is in OB/OS area with the option "Max Number of Bars in OB/OS" you can set the minimum/maximum distances between Tops/Bottoms with the options "Min Number of Bars between Tops/Bottoms" and "Max Number of Bars between Topss/Bottoms" and you can set the color and line widths as you wish. These tops or bottom must be sequential, means there mustn't be another top while checking tops or bottom while checking bottoms between them. in next example you can see valid and invalid bottoms: After you got signal then you better use Stop Order, a few pips higher than the high of colored candle for long positions, ( vise versa in short positions ). so you may escape from traps. ("Stop order" is filled when the price reached a pre-specified price. for example the price is now 10.0 and you set Buy Stop Order at 11.0 then if price reaches 11.0 then your buy order get filled. you can put stoploss a few pips lower than the low of colored candle or you can use ATR to decice stoploss level. how you wish) For example in following screenshot you can see that buy stop order was not filled and you didn't take long position. Enjoy!
Indicator
by LonesomeTheBlue
39
bgeraghty_FibCastThis script draws a High-To-Low or Low-To-High Fibonacci Retrace over the chart, based on which of those two happens in the given time period (Default is 144 Candles). Updates from older versions: - Paints 0.5, 0.618, 0.65 and spaces in between, giving good hindsight to the trend, and ideas of where strong support/resistance may lie. - Silver Paint Strip = 0.50 retrace, Gold = 0.618-0.65, and the Red/Green between indicates the direction of the (Fib) Trend as H->L or L->H - Paints 0.144 and 0.886 ranges Blue, and these are typically extremes or possible reversal zones. (PRZ)
Indicator
by bgeraghty
2
Support Resistance - Dynamic v2Hello Traders! After the addition of "Arrays" to the Pine, I developed new and improved version of Support Resistance - Dynamic script as version 2. In this script Arrays were used. This can be used as Support Resistance tool, also it will be an example for the people who want to learn Array usage in Pine. Many thanks to Pine Team for adding Arrays! The script finds the Pivot Points and check them in channels if there can be S/R or not, and draws mid line of the channel as S/R line. you can set number of PPs and channel width in the options. Each channel width is optimized dynamically according to Pivot Points. Also you can choose " High/Low " or " Close/Open " as source for Pivot Points. There is an option for maximum number of S/R levels. S/R levels are found and sorted dynamically and number of S/R lines with enough strength changes dynamically. Some other options for coloring and line width. (Solid, Dashed or Dotted) S/R levels are shown in the Labels and Label colors are changed automatically, if S/R line is below the closing price then it's color is Green (as Support), otherwise its color is Red (as Resistance). Examples: Enjoy!
Indicator
by LonesomeTheBlue
252
Trend Following with Moving AveragesHello Traders, With the info "Trend is Your Friend ", you should not take position against the trend. This script checks multipte moving averages if they are above/below the closing price and try to find trend. The moving averages with the length 8, 13, 21, 34, 55, 89, 144, 233, 377 used. these are fibonacci numbers, but optionally you can change the lengths of each moving averages. while it's green you better take long positions, while it's red you better take short positions according to other indcators or tools. Optionally you have "smoothing" option to get rid of whipsaws. it's enabled by default. You have option to use following moving average types: EMA, SMA, RMA, WMA, VWMA. by default it's EMA Also the script has "Resolution" option. with this option you can get the trend for other time frames, in following example 1h was set as for higher time frame on 15m chart: This should not be used as buy/sell signal indicators as it's tries to find trend but not entry points, you should use other indicators (such RSI, Momentum) or other tools to find buy/sell signals. Enjoy!
Indicator
by LonesomeTheBlue
14
Simple Fibonacci RetracementSimple Fibonacci Retracement is a free and easy to use script to plot Fibonacci levels, for any assets like Stocks, Forex, Commodities , Cryptocurrencies etc. on any time frame chart. Fibonacci Levels can be plotted using Lookback or manual Price input from the settings. 1. Lookback type - Candles Determines the High and Low price of the user input number of Candles back (100 default) and plots Fibonacci Levels based on the calculated High and Low for the number of candles in the past from the current candle. The levels stay intact on any time frame as long as no new Highs or Lows are formed. 2. Lookback type - Days Determines the High and Low price of the user input number of Days back (100 default) and plots Fibonacci Levels based on the calculated High and Low for the number of days in the past from the day of the current bar. The levels stay intact on any time frame as long as no new Highs or Lows are formed. 3. Manual Price Input Plots Fibonacci Levels based on the user specified High and Low Price in the settings input fields. The levels stay intact on any time frame irrespective of new Highs or Lows being formed. Manual Price Input will enable the trader to keep the Levels intact and visually see the higher Fibonacci Retracement levels, when the price crosses beyond 100% retracement. On the other two lookback types, the Fibonacci levels are displayed only upto 100% retracement. The Fibonacci levels can also be reversed by enabling 'Reverse' option from the settings.
Indicator
by TradeChartist
45
Consolidation Zones - LiveHello Traders! This is the script that finds Consolidation Zones in Realtime. How it works? - The script finds highest/lowest bars by using "Loopback Period" - Then it calculates direction - By using the direction and highest/lowest bar info it calculates consolidation zones in realtime - If the length of consolidation area is equal/greater than user-defined min length then this area is shown as consolidation zone - Then Consolidation Zone extends automatically if there is no breakout if you increase the Loopback Length then you get bigger consolidation zones: You have option to "Paint Consolidation Area" or not: Enjoy!
Indicator
by LonesomeTheBlue
88
Freedom FibThis script will allow to automatically draw levels on the chart for a potential pullback play like shown in this snapshot here It will draw risk/reward levels upon your favorite ema (default is 13ema) as the price goes and it will work for both long or short scenarios for a potential trend continuation play. You got the option to align your level to match exactly your selected ema or to be placed in between the first two levels (default settings) if you prefer. I personally use this one settings for shorter time frames (up to 3min) and the aligned one for higher time frames.
Indicator
by freedom_trader_
31