EMA 50x200 Cross Trend Barometer The 50/200 moving-average cross is one of the most-watched signals in markets:
the "golden cross" and the "death cross." Trend Barometer turns that classic into
a clean, at-a-glance read on the prevailing regime, the way a barometer reads the
pressure before the storm.
When the fast average (50) sits above the slow one (200), the market is in a
risk-on regime and the chart glows fair-weather green (☀). When it slips below,
conditions turn risk-off and the chart shifts to storm red (⛈). One look tells you
which side of the trend you're standing on.
WHAT IT SHOWS
• Regime-coloured EMA 50 and EMA 200, with a shaded gap between them
• A soft background tint for the current regime (risk-on / risk-off)
• Golden-cross ▲ and death-cross ▼ markers on the exact flip bar
• A compact weather panel: current regime, bars held in it, and the last cross
• Alerts on every regime flip
MAKE IT YOURS
Switch between EMA and SMA, set your own fast/slow lengths (50/200 by default),
and recolour everything to match your chart.
HONEST BY DESIGN
This is a regime lens, not a buy/sell system. A barometer reports the conditions;
it doesn't place your trades. The 50/200 cross is trend-following context: great for
reading the prevailing regime and filtering out noise, but it lags turns and is not
an entry trigger on its own. Use it to frame your bias and manage risk alongside
your own analysis.
NO REPAINTING
Some indicators quietly rewrite their own past: you look back and see a signal at a
perfect spot that simply wasn't there when the bar formed. That flatters them in
hindsight. This one can't do that. It only ever reads the current and earlier bars,
never the future (no request.security, no forward references), so a cross printed
two years ago sits exactly where it printed at the time.
One caveat, true of every indicator: the newest bar is still forming, so the colour
can flicker while it's live. A cross is only final once that bar closes. Indicatore
Indicatore
Indicatore
Compression Clock (Axiom Multi-TF Adaptive)**Compression Clock (Axiom Multi-TF Adaptive) — Volatility Regime & State Age**
---
### **Description**
#### **Overview**
The **Compression Clock** is a non-directional volatility regime indicator based on the **Axiom quantitative research framework**. Instead of attempting to forecast market direction, it isolates the temporal dimension (**WHEN**) by measuring the duration and depth of volatility compression across any resolution.
Markets do not transition from quiet to expansion instantaneously; they exhibit a survival-rate decay where prolonged low-volatility states exponentially elevate the baseline probability of large physical displacement. The Compression Clock standardizes this process by normalizing rolling volatility and volume percentiles against a physical-time benchmark.
---
#### **Mathematical & Architectural Core**
1. **Dual-Feature Quiet Filter**:
* Evaluates rolling True Range ($\text{ATR}_{24}$) and Traded Volume ($\text{SMA}_{24}$) scaled against an intraday 24-hour physical window:
$$\text{ATR}_{\text{rolling}} = \text{SMA}(\text{TR}, N_{\text{bars}}), \quad \text{Vol}_{\text{rolling}} = \text{SMA}(\text{Volume}, N_{\text{bars}})$$
* Computes the rolling percentile rank of both features across a rolling 180-day baseline distribution.
* A bar qualifies as **Quiet** if and only if both features sit simultaneously in the lower tercile:
$$\text{Quiet}_t = \mathbb{I}\left(\text{Rank}(\text{ATR}_t) \le 33.33\%\right) \land \mathbb{I}\left(\text{Rank}(\text{Vol}_t) \le 33.33\%\right)$$
2. **Physical-Time Normalization**:
* TradingView indicators often suffer from timescale distortion when hardcoding bar-based periods across multiple resolutions.
* This script dynamically translates resolution minutes ($M_{\text{tf}}$) into actual **physical hours**. Whether applied to a 5-minute, 30-minute, or 4-hour chart, the Y-axis consistently represents **elapsed physical hours of continuous compression**.
3. **Regime State Categorization**:
* **S0 (ACTIVE)**: Market is expanding or fluctuating outside the quiet threshold. Compression age resets to 0.
* **S1 (QUIET, < 24 Hours)**: Early-stage compression. Natural volatility dampening without statistical hazard elevation.
* **S2 (MATURE, 24 – 72 Hours)**: Statistically mature compression. Historical survival analysis indicates a significant elevation in large-displacement probability.
* **S3 (DEEP, > 72 Hours)**: Extreme volatility exhaustion. Persistent absence of dispersion indicating imminent volatility expansion.
---
#### **How to Use (Methodological Discipline)**
* **Decoupled Architecture**:
* The Clock dictates **WHEN** (volatility environment), not **WHAT** (direction) or **HOW** (execution).
* Never treat an S2/S3 state as a directional trade signal. A compression state is directionally agnostic—it warns of imminent displacement hazard, but the direction must be governed by external momentum or structural acceptance/rejection models.
* **Multi-Timeframe Scope**:
* Low-scale compression (e.g., 5m/15m entering S3) reflects localized intraday order book exhaustion. It does **not** override a higher-timeframe S0 state. For macro regime filtering, monitor higher physical resolutions (such as 4H).
* **Buffer Safety**:
* Includes a built-in 4,900-bar memory clamp to prevent buffer overflow exceptions on ultra-low timeframes while maintaining valid causal percentile rankings.
---
#### **Inputs**
* **Rolling Feature Duration (Hours)**: Physical length of the short-term smoothing window (Default: 24h).
* **Lookback Days (Days)**: Historical distribution window for empirical percentile rankings (Default: 180 days).
* **Quantile Rank Threshold (%)**: Cutoff for the quiet regime (Default: 33.333% — bottom tercile). Indicatore
Session Fibs | Falcon AIAuto-draws Fibonacci retracement levels across a trading session's range, anchored to that session's own high and low.
Pick a session window and the script anchors the fib to it, then projects the 0 / 23.6 / 38.2 / 50 / 61.8 / 78.6 / 100% levels, with optional 127.2 and 161.8% extensions.
Two modes. Previous session (the default) fibs the range that has just COMPLETED and projects those levels onto the session now trading, giving you stable references that do not move under you. Current session anchors live to the developing high and low, so the levels update as the range extends. That is useful for watching a session build, but the levels shift intraday. Knowing which of the two you are looking at matters more than the ratios themselves: one is fixed, one is not.
How to read it: the 38.2 / 50 / 61.8% band holds the common pullback zones inside a range, and the 61.8-78.6% area is the classic deep retrace. Extensions are common measured-move targets beyond the range. Reference levels, not signals.
Settings: session window and timezone, previous or current session, flip the 0% and 100% ends, extensions on/off, line width and colours, shade the 61.8-78.6% zone, labels.
Session logic needs an intraday chart. The default window is the standard US index cash session; change it to whatever market you trade.
This script does NOT place trades, does NOT backtest, and contains no entry, stop, or position-sizing logic. It is pure geometry off one session's high and low, with no trend model, pattern model or scoring. Your entry, your risk.
Educational tool only. Not financial advice. Fib levels are reference points, not predictions. Indicatore
Pivot Points | Falcon AIDraws Classic and Camarilla pivot levels from the previous period's high, low and close, on a daily or weekly anchor.
Classic pivots give you the central pivot plus three supports and three resistances, derived from the standard published formula. Camarilla uses a tighter multiplier set, so its levels sit closer to price and are read differently: the inner pair as mean-reversion boundaries, the outer pair as breakout markers. Both are drawn from the same prior-period data, so you can see where the two frameworks agree or disagree on a given day.
Levels are drawn as extended lines with optional labels and refresh automatically when a new period begins. You can show either set on its own or both together, and switch the anchor between daily and weekly. Only the current period extends to the right and carries labels, so the chart stays readable as history builds.
Settings: pivot period (Daily / Weekly), method (Classic / Camarilla / Both), include current unclosed period on or off, how many R/S pairs to show, periods of history to keep drawn, colours, widths, label side, info panel.
A note on repainting: by default the levels come from the last CLOSED period and stay fixed all session. Turning on "Include current (unclosed) period" deliberately opts into levels that move as the period develops.
This script does NOT place trades, does NOT backtest, and contains no entry, stop, or position-sizing logic. It draws reference levels and nothing more. Your entry, your risk.
Educational tool only. Not financial advice and not a recommendation to buy or sell. Past price behaviour around any level does not predict future behaviour. Indicatore
TP/SL Signals💀 TP/SL Signals & Strategy: Automated Risk Management Tool
⚠️ IMPORTANT: Don't forget to BOOST 🚀 (Like) and FOLLOW for more institutional-grade, open-source Pine Script scripts! Your support keeps this project active and updated!
📌 Overview
💀 TP/SL Signals is a powerful multi-timeframe trading system built to resolve the biggest trader challenge: Discipline and Risk Management.
By filtering price noise with Hull Moving Averages (HMA) across multiple timeframes, this tool identifies key trend pivots and automatically projects your entry, stop-loss, and multi-tier take-profit targets directly onto your chart.
✨ Key Features
🎯 Dynamic Entry Signals: Built on real-time cross-over logic using fast and slow HTF Hull Moving Averages.
🛡️ Automated Risk/Reward Levels: Visualizes exact SL, TP1, and TP2 target lines as soon as a trade opens.
⚖️ Trailing Breakeven: Automatically moves your Stop Loss to the entry price once TP1 is reached to secure a risk-free trade.
📊 Fully Customizable Risk Controls: Adjust percentages for SL, TP1, and TP2 dynamically in settings.
🔔 Instant Alerts: Built-in webhooks & alert conditions for instant Long/Short entry push notifications.
⚙️ How It Works
Trend Identification: The script fetches high-timeframe trend momentum using calibrated 5-minute and 15-minute HMA lines.
Execution Signals:
LONG 🟢: Triggered when 5m HMA crosses above the 15m HMA.
SHORT 🔴: Triggered when 5m HMA crosses below the 15m HMA.
Automated Exit Logic:
Reaching TP1 locks in partial profits and adjusts the stop loss to Breakeven.
Final exit triggers when TP2 is reached or trailing SL is hit.
🛠️ Recommended Setup
Timeframe: 1m, 5m, or 15m charts.
Assets: Crypto (BTC, ETH), Forex Majors, Stocks, or Indices.
Risk Management: Default is set to 1.0% SL, 1.0% TP1, 2.0% TP2. Tune these in the settings menu based on market volatility.
💡 Backtesting & Open Source
This indicator is 100% open-source and completely free to use. Test different parameter setups on historical data to fine-tune win rates for your favorite pairs.
🤝 Join the Community!
If this indicator helps you manage risk better or boosts your win rate:
Hit the Rocket Button 🚀 to boost this post!
Click Follow to never miss future indicator upgrades, strategy updates, and trading scripts.
Drop a comment below with your favorite assets to trade using this system!
Disclaimer: Past performance is not indicative of future results. Always practice proper risk management. Indicatore
Hurst Exponent Regime [RC Tools]RC Tools — Hurst Exponent Regime
────────────────────────────────────────────────────────────────────
█ OVERVIEW
Most regime tools ask "is price trending right now." This one asks a more fundamental question: does this market's statistical character currently reward trend-following or mean-reversion? It applies the Hurst Exponent — a statistic originally developed to study Nile river flood records — via rescaled-range analysis, to classify the market into one of three long-memory regimes.
█ WHAT IT DOES
Estimates the Hurst Exponent (H) over a rolling window and classifies each confirmed bar as Trending (persistent), Mean-Reverting (anti-persistent), or Random Walk (no memory). Colours the chart background accordingly, plots both the smoothed and raw H line in a dedicated pane against static threshold lines and the 0.5 "true random walk" reference, and shows a table with the current state, how long price has been in it, and historical base rates (average forward return and win rate) for each state.
█ THE THEORY BEHIND IT
H.E. Hurst developed this statistic in the 1950s while studying how to size reservoirs for the Nile, where flood years tended to cluster rather than arrive randomly — a property he needed to measure and design around. The same statistic applies to any time series: it measures whether large values tend to be followed by more large values of the same sign (persistence, H > 0.5), whether they tend to reverse (anti-persistence, H < 0.5), or whether the series has no memory at all (H = 0.5, a true random walk).
Applied to price, this is a genuinely different question from "is this asset trending." A trend-following indicator can flag a trend within a market whose underlying character is actually mean-reverting — in which case that trend is more likely to be a temporary deviation that reverses. Knowing which regime you're in tells you which family of tools (trend-following vs. mean-reversion) is statistically better suited to current conditions, independent of what any single trend or oscillator reading says right now.
█ HOW IT IS CALCULATED
1. Take log returns over the window.
2. Build the cumulative deviation-from-mean series within the window, in chronological order, and take its range (maximum minus minimum) — this is R.
3. Compute S, the window's standard deviation of returns.
4. Apply Hurst's classic empirical relation: R/S is approximately equal to (window length / 2) raised to the power H. Rearranging gives H = ln(R/S) / ln(window length / 2).
5. Optionally smooth H (the raw rescaled-range estimate is noisy bar-to-bar by construction).
6. Classify: H above the Trending threshold (default 0.55) → Trending. H below the Mean-Reverting threshold (default 0.45) → Mean-Reverting. Otherwise → Random Walk.
Classification occurs ONLY on confirmed bar close — the plotted H, the background colour and the table all update together, so nothing here can disagree mid-bar or flip back and forth as the current bar forms.
Note: this is a single-scale rescaled-range estimate using Hurst's classic empirical formula, not a full multi-scale regression across many window sizes. It is a practical, computationally efficient approximation, not a research-grade estimator — treat it as a useful compass, not a precise measurement.
█ SETTINGS & CONFIGURATION
• Source (default close)
• Window Length (default 100) — longer windows give a more stable estimate but react slower to a genuine regime change
• Trending / Mean-Reverting Thresholds (default 0.55 / 0.45) — the H values beyond which a regime is declared; the gap between them is the "Random Walk" zone
• Smoothing Length and Type (default 5-period EMA) — reduces the raw estimate's bar-to-bar noise
• Forward Return Window (default 20 bars) — the horizon used for the base-rate table
• Table visibility, position and colours are fully configurable; the main-chart background painting can be toggled off if you only want the statistics pane
█ HOW TO USE IT
Use it to decide which family of tools to trust right now, not as a standalone entry signal. Example: if you run a mean-reversion system, check whether it has historically performed better when this tool reads Mean-Reverting than when it reads Trending; a trend-following system should show the opposite pattern. Check the base-rate table's sample count before treating any single state as meaningfully predictive.
Works on any asset and timeframe with sufficient history for the Window Length. Best used on daily and above, where regime persistence is greatest and the R/S window has enough independent observations to be meaningful.
█ LIMITATIONS
• This is a SINGLE-SCALE rescaled-range estimate, not a full multi-scale regression across many window sizes — a practical approximation, not a research-grade estimator.
• H describes the market's statistical character over the window — it does NOT identify direction. A "Trending" reading means persistence is likely, not which way.
• The R/S statistic assumes no major structural breaks within the window; a sudden regime shift partway through the window can distort the estimate until it fully rolls off.
• Shorter windows react faster but produce noisier, less reliable H estimates; longer windows are more stable but slower to reflect a genuine regime change.
• Historical base-rate stats need a meaningful sample count (check N) before being trusted, especially for the less common states.
• This script does NOT repaint. All classification updates on confirmed bar close only.
█ DISCLAIMER
For educational and informational purposes only. Nothing here is financial advice. Past behaviour of any regime state does not indicate future results. Trade at your own risk.
Indicatore
Volatility Supply and Demand ZonesMost supply and demand tools have the same two problems. They stack near-identical zones on top of each other until the chart is unreadable, and they leave dead zones projecting to the right edge forever, long after price has traded straight through them. This script is built to fix both.
Everything here is measured in ATR, so the same settings behave proportionately on a quiet instrument and a violent one.
HOW A ZONE IS BUILT
A confirmed pivot marks the edge of a zone. Its depth is a fraction of ATR(50):
buffer = ATR(50) * zone depth / 10
A sell zone takes the pivot high as its top and extends the buffer downwards. A buy zone takes the pivot low as its bottom and extends the buffer upwards. A dotted mid line marks the centre of each zone.
Zone depth 2.5 therefore spans a quarter of one ATR. The zone is anchored to the bar the pivot actually formed on, not the bar that confirmed it.
WHY ZONES DO NOT PILE UP
This is the part that changes how the chart reads.
Before a zone is drawn, its midpoint is measured against the midpoint of every live zone on the same side. If it falls inside a separation band of a chosen ATR multiple, it is refused and nothing is drawn.
The effect is most obvious during consolidation, which is exactly where an unfiltered supply and demand indicator produces a dozen overlapping bands that all mean the same thing.
One detail matters here: a zone that has already been broken is removed from the live set, so it can never block a fresh zone that forms in the same price area later. Zones filter each other only while they are still alive.
WHAT HAPPENS WHEN A ZONE IS BROKEN
A sell zone is broken by a close above its top, a buy zone by a close below its bottom. There is a switch for wick-based breaks, which retires zones far more aggressively.
Three behaviours are available:
- Remove deletes the zone outright. Cleanest chart.
- Freeze at the break stops it extending, so it stays as history at the bar it died.
- Leave it running keeps it projecting forever, for anyone who wants the old behaviour.
Frozen zones are capped by the same memory setting, so they cannot accumulate without limit.
MARKET STRUCTURE
A second, stricter detector runs alongside the zones.
A swing is only accepted when price staircased into it and staircased back out of it. Every bar approaching the swing must be higher than the one before, and every bar leaving it lower, with the swing bar itself the extreme of its own window. This is deliberately narrower than a plain pivot and it produces fewer, cleaner levels.
Strict staircase can be turned off. In tolerant mode an equal high or low no longer rejects a swing; only a bar moving the wrong way does. On instruments that print repeated highs this finds noticeably more structure, and the difference is worth measuring on your own symbol.
When a close takes a swing level out, the level is spent and cannot fire again. The break is classified against the standing phase:
- shift, when the break reverses the phase, or when it is the first break on the chart and there is no phase to continue
- cont, when the break extends the phase already in force
The tag sits midway along the line back to the level it took out, so it reads as a label for the whole move rather than an annotation on one bar.
SUPPORT AND RESISTANCE RAYS
Optional and off by default. After a structure break, a backward scan finds the extreme reached between the swing and the break, then projects it forward until a close takes it out.
It is off by default because it runs a scan on every break. The scan limit is adjustable and bounds the work done on a single bar.
SETTINGS THAT MATTER MOST
- Pivot length decides how much structure becomes a zone. Shorter reacts faster and draws more.
- Zone depth sets thickness only. It does not change where zones appear.
- Separation is the single most effective control over chart density.
- Structure span controls the swing detector independently of the zones.
NOTES FOR ANYONE READING THE CODE
Two things in here are easy to get wrong, and both are commented in the source.
ta.highest and ta.lowest carry rolling state and must be evaluated on every bar. Placed behind an and operator they get short-circuited away whenever an earlier condition fails, their window is then built from a sparse history, and the comparison silently stops matching. They are hoisted to the global scope for that reason.
The retirement pass walks its array backwards. Removing entries during a forward pass makes the loop skip the element that slides into the vacated index. Counted loops are also guarded against an empty array, because a Pine for loop from 0 to size minus one counts downwards when the array is empty and reads index minus one.
LIMITATIONS
- A pivot is only confirmed a number of bars after it forms. That delay is inherent to pivot detection and no indicator can remove it, here or anywhere else.
- Zone edges are drawn where the pivot was, so a zone appears on the chart later than the bar it is anchored to.
- In a tight range the separation filter will refuse most new zones by design. That is the intent, but it does mean the chart can look sparse exactly when price is busiest.
- The structure detector is strict by default and will miss swings on instruments that print equal highs and lows. Turn strict staircase off if that matters on your symbol.
- Nothing here predicts direction. It marks where price previously turned and whether those levels are still intact.
- Nothing here is financial advice. Position sizing and risk management remain your own responsibility.
This is original work. It reuses no code from any other publication. The source is open, so read it, change it, and take it further.
Indicatore
Adaptive ATR% Extension ScannerIdentifying when a stock is historically overextended and due for a mean-reverting pullback is a critical component of risk management and scaling out of swing trades. The Adaptive ATR% Extension Scanner provides an objective, mathematical way to measure these extensions based entirely on a stock's unique historical volatility profile.
Rather than relying on static guesses for when a stock is "too far" from its moving average, this tool actively reads the chart's history to tell you exactly when current price action has reached an statistical extreme.
Key Features:
Dynamic Percentile Lookback: The indicator automatically scans the last 20 swing highs (pullbacks) for the specific ticker you are viewing. It calculates the exact ATR% multiple at each peak to establish a unique historical baseline for what constitutes an "extended" move.
Dual-Tier Signals: The script calculates the 75th percentile (Warning) and 90th percentile (Extreme) of past pullbacks. It plots highly customizable signals directly on your chart when the current price breaches these historically significant thresholds.
Multi-MA Variance Scanner: Not every stock respects the same baseline. The built-in dashboard tracks the 10 EMA, 20 EMA, 50 SMA, and 200 SMA simultaneously. It calculates the historical variance for each to determine which moving average produces the most tightly clustered, predictable extensions.
Auto-Best Fit: The script can automatically select the moving average with the lowest historical variance to drive your chart visuals and trigger your signals, completely removing the guesswork.
Customizable Price Bands: Toggle upper price bands on or off to project exactly what dollar amount the stock needs to hit to reach an overextended state, allowing you to easily set advance limit orders.
How to Use:
Leave the MA setting on "Auto (Best Fit)" to let the script find the most predictable baseline for the current ticker. Watch for the warning dots (yellow by default) as a signal to scale out partial positions, and extreme dots (red by default) as a signal to tighten trailing stops aggressively. Full customization options allow you to change dot colors, emojis/characters, opacity, and dashboard visuals to fit your exact charting style. Indicatore
Edo Swing StateEdo Swing State — Labels Every Swing as HH, HL, LH or LL and Resolves Market Structure into a Single State
Market structure is the skeleton beneath almost every method of technical analysis: an uptrend is a run of higher highs and higher lows, a downtrend a run of lower highs and lower lows, and the moment that sequence breaks is the moment a trend starts to change. Edo Swing State makes that skeleton explicit. It detects each price swing, labels it with its structural role — higher high (HH), higher low (HL), lower high (LH) or lower low (LL) — and combines the last high and last low into one readable market state.
It draws a swing line that connects the confirmed pivots, marks each swing with a coloured HH/HL/LH/LL label, and reads the whole into Bullish, Bearish or Ranging in a compact panel — all validated on closed bars so the indicator does not repaint. It is a self-contained structure reader: the swings, their roles and the resulting state are all derived from the price series on the chart alone, with no dependency on any other tool.
THE HH / HL / LH / LL CLASSIFICATION
The indicator compares each new swing with the previous one of the same type. A swing high above the previous high is a Higher High (HH); below it, a Lower High (LH). A swing low above the previous low is a Higher Low (HL); below it, a Lower Low (LL). Each label is written at the pivot and does not move. Rising highs and rising lows are the signature of buying strength; falling highs and falling lows, the signature of weakness. High labels are drawn above the swing, low labels below it, colour-coded green for the bullish roles and red for the bearish ones.
SWING PROFILES
The sensitivity of the swings is set by a single Swing Profile input: Scalper (5 bars each side) for fast intraday swings on low timeframes, Swing (10 bars, the default) for the balanced 4H and daily read, and Long Term (21 bars) for the major swings on weekly and higher horizons. The larger the length, the more significant a turn has to be, and the fewer but more important the swings that are marked.
THE MARKET STATE
Above the individual labels, Edo Swing State resolves one overall state by combining the role of the last high with that of the last low. Bullish requires a last high of HH and a last low of HL — rising highs and lows. Bearish requires a last high of LH and a last low of LL — falling highs and lows. Any mixed combination is treated as Ranging. Requiring both sides to agree is deliberate: if price makes a higher high but then loses the previous low, the structure is no longer cleanly bullish, and the state turns to Ranging — precisely the transition zone where a trend starts to fail before the full turn is confirmed. The first LH after a run of HHs, or the first HL after a run of LLs, is the earliest crack in a trend, labelled the moment it is confirmed.
THE SWING LINE
The swing line connects the confirmed pivots in a continuous zigzag, tracing only the legs that run from one swing to the next and filtering out the intermediate noise. It reveals the real skeleton of the move — where price accelerates and where it loses momentum. The line and the labels can each be toggled independently, for a cleaner or a more informative chart.
INFORMATION PANEL
The panel condenses the read into a compact table under the indicator header: the overall market state (Bullish / Bearish / Ranging), the role of the most recent confirmed swing, and the role of the last high and the last low, in the same green/red colour code. The state row is the underlying read; the last-high and last-low rows explain why the state is what it is. The panel sits in any of the four chart corners (Top Right by default), comes in three sizes (Tiny / Small / Normal) and two themes (Dark / Light), and can be hidden entirely. To keep the calculation light, it is drawn only on the last bar.
NO REPAINTING
Swings are built on confirmed pivots and the state change is validated on closed bars, so a label never appears or disappears intrabar. There are no higher-timeframe functions: all logic runs on the current chart timeframe, which keeps the indicator lightweight and repaint-free. For a multi-timeframe read, apply it on several charts at once and look for the confluence of states.
CONFIGURATION
The inputs are grouped by block. Structure sets the swing profile and toggles the HH/HL/LH/LL labels and the swing line, listed in the settings as Show structure line (zigzag). Style exposes the bullish and bearish colours, the line colour and width, the label size and the Dark/Light theme. Panel controls panel visibility, position and size. The defaults are calibrated to work without adjustment on stocks, crypto, forex, indices and futures, on any timeframe — the input most users touch is the Swing Profile, to match the swings' sensitivity to their trading horizon.
ALERTS
Six predefined alerts cover the structure read. Four swing alerts — New Higher High, New Higher Low, New Lower High and New Lower Low — fire when each new pivot is confirmed with its role. Two structure alerts — Structure Bullish and Structure Bearish — fire only on the phase turn, when the overall state flips. All alerts fire on bar close, consistent with the indicator's anti-repaint validation.
HOW TO READ IT
Use the state as a context filter: look for longs while structure is Bullish and shorts while it is Bearish, and treat Ranging as caution — the zone where trends run out and false moves cluster. Use the change labels as an early warning: the first LH after a series of HHs, or the first HL after a series of LLs, flags a fading trend before the overall state fully turns. And read it in confluence: a Bullish state on the trading timeframe that sits inside a Bullish state on a higher one is a far more solid trend than an isolated read. Read on its own terms, the sequence of labels is the whole method: the roles say what the market is doing, and the state says whether it is doing it cleanly.
OPEN SOURCE
Edo Swing State is published as a free open source indicator. The full Pine Script is publicly accessible on TradingView for study, adaptation and integration into any workflow. Part of the Edolab Markets free tools ecosystem, all available on TradingView.
This indicator is a technical analysis tool for educational and informational purposes only. It does not generate automatic buy or sell signals and should not be considered financial advice. Trading financial markets involves significant risk of capital loss. Past performance does not guarantee future results. Always use proper risk management.
Indicatore
RTH 1st Presented FVGPlots the first Fair Value Gap of the Regular Trading Hours session and keeps those levels on the chart.
First presented FVG
Detects the first 3-candle wick-and-body FVG after the cash open. The middle candle cannot be the 09:30 bar, so the earliest valid gap starts at 09:31. By default the gap is measured on 1-minute data and drawn on any chart up to the Max Timeframe. Turn on “Use Chart Timeframe for 1st Presented” to measure it on the chart’s own timeframe instead.
Gradient Levels
Each gap can show high/low, equilibrium, quartiles, and optional eighths. One label sits at the midpoint. Boxes and lines can extend right with a bar buffer.
History
Choose how many daily first-FVGs to keep. Optionally keep a separate count of Monday and Friday gaps so those days stay visible longer.
Premium / Discount
Builds a range from recent first-FVG highs and lows. A table shows premium or discount versus equilibrium, with optional gradient lines at high, low, mid, quartiles, and eighths.
Overlapping FVGs
Optionally highlight later FVGs that trade through a stored first-FVG level. Can limit that to the first overlap of the session.
Session hours, timezone, colors, line styles, and Max Timeframe are all user-controlled. Indicatore
TheStrat Command Center v1.5TheStrat Command Center
TheStrat Command Center is a chart-based decision-support tool built for traders who use "The Strat" methodology created by Rob Smith (R.I.P.)
Its purpose is to organize several pieces of TheStrat information that normally have to be monitored separately — current candle structure, possible next directional setups, Full Time Frame Continuity (FTFC), entry and invalidation levels, nearby objectives, and risk-based targets — into one live dashboard.
It is not intended to predict the market or replace the trader's own interpretation of price action. The goal is to make the current Strat structure easier to read and manage.
Strat Structure
The indicator classifies price bars using the standard Strat framework:
1 - Inside bar
2U - Breaks the previous high without breaking the previous low
2D - Breaks the previous low without breaking the previous high
3 - Outside bar that breaks both sides
The prior closed candle is treated as the current setup candle. The developing candle is then evaluated against that completed setup.
The Command Center uses that relationship to identify possible structures such as:
2-2 reversals
2U or 2D continuation
2-1-2 structures
3-to-2 directional resolution
Failed 2 reversals
Both the upside and downside possibilities remain visible so the trader can see what price would need to do in either direction.
Failed 2 Recognition
Failed 2 candles are handled separately from ordinary 2 bars.
A Failed 2U must first be a true 2U and then close below its own open.
A Failed 2D must first be a true 2D and then close above its own open.
If the candle breaks both the previous high and previous low, it is classified as a "3", which overrides the Failed 2 condition.
Failed 2 markers are placed on the actual failed candle after it closes.
Full Time Frame Continuity
The indicator monitors up to six user-selected timeframes for Full Time Frame Continuity.
Each timeframe is evaluated by comparing its current price with its timeframe open:
Green = above the timeframe open
Red = below the timeframe open
Flat = at the timeframe open
Users can choose which of the six timeframes are required for FTFC.
Full bullish FTFC exists only when every required timeframe is bullish. Full bearish FTFC exists only when every required timeframe is bearish. A majority or directional lean is not treated as Full Time Frame Continuity.
An optional setting can restrict new suggested trades to setups that agree with Full FTFC. Timeframes that are displayed but not marked as required remain informational and do not block a setup.
Command Center Dashboard
The dashboard is intended to answer, at a glance:
* What is happening now?
* What was the last completed Strat candle?
* Is a reversal currently available?
* Is Full Time Frame Continuity present?
* What is the best structural play under the selected FTFC rules?
* What are the possible upside and downside plays?
* Where are the applicable entry and stop levels?
* How far is price from the next trigger?
* Where are nearby structural objectives?
* Where is price relative to the trading-session open?
The indicator includes separate Desktop and Mobile layouts. The Desktop dashboard can also hide its lower detail section to conserve chart space.
Entry, Stop and R-Based Target
For standard Strat setups, the indicator calculates a potential entry beyond the setup candle high or low using a user-selected tick offset.
The opposite side of the setup candle is used as the invalidation/stop reference.
Failed 2 reversals use a fixed rule:
* Failed 2D long: entry one minimum tick above the Failed 2D high and stop one tick below its low.
* Failed 2U short: entry one minimum tick below the Failed 2U low and stop one tick above its high.
Once the entry-to-stop distance is known, the indicator calculates a user-selected reward target from 0.5R through 5R, where 1R equals the initial entry-to-stop risk.
These levels are informational chart references and are not brokerage orders.
Waiting and Active Trade Lines
Before a setup triggers, optional dashed entry stubs show the available directional trigger levels.
If one side triggers, the opposite waiting setup is removed and the chart can display:
* Entry
* Stop
* Selected R target
The lines remain while that setup is active.
When the target or stop is reached, the active trade lines are removed automatically. A user may also manually dismiss a waiting setup or cancel the indicator's monitoring of an active setup without recording it as a target or stop result.
If both sides of the setup candle are broken by the same developing bar, the condition is treated structurally as an outside/3 bar rather than assuming a directional entry.
Session Levels and Objectives
The indicator can also display contextual price levels.
For futures, the reference trading session begins at 6:00 PM Eastern Time .
For equities, indexes and other non-futures instruments, the reference session begins at 9:30 AM Eastern Time .
The dashboard can show:
* Reference session open
* Previous session high
* Previous session low
* Recent range high and low
* Distance to the next upside or downside trigger
* Nearby prior-high or prior-low objectives
The recent-range lookback is user-adjustable.
These objective levels are contextual references. They are not predictions that price will reach those levels.
Alerts
Alert conditions are included for:
* Confirmed Failed 2U
* Confirmed Failed 2D
* Confirmed upside trigger
* Confirmed downside trigger
* Target reached
* Stop reached
Developing vs. Confirmed Information
The Command Center intentionally contains both closed-bar structural information and live developing information.
The setup itself is based on the prior completed candle. Failed 2 identification is confirmed on candle close.
The current developing candle type can change before that candle closes as new highs or lows are made.
FTFC also uses the current state of the selected higher-timeframe candles. Because those candles remain open until their respective timeframes close, their green/red state — and therefore live FTFC — can change intrabar.
Users should distinguish these live contextual readings from closed-bar confirmations.
Limitations
This is an indicator, not a TradingView strategy or backtest . It does not provide historical profitability statistics or claim that a displayed setup will be successful.
The indicator does not know the exact sequence of every price movement inside a completed historical candle. If multiple relevant levels are touched within the same bar, OHLC chart data may not reveal which price traded first.
Results and displayed structures can also vary depending on symbol, chart timeframe, market session, selected FTFC timeframes, tick offset, R target, and available chart data.
The tool is designed for standard price charts and should be interpreted alongside the trader's own analysis and risk-management process.
What Makes the Script Different
The Command Center is designed as an integrated Strat workflow rather than simply placing candle numbers on a chart.
It combines the prior closed-bar setup, live directional resolution, exact Failed 2 handling, user-defined FTFC requirements, two-sided structural possibilities, trigger/invalidation levels, R-based trade planning, session context, nearby objectives, active-setup management, alerts, and desktop/mobile presentation into a single decision hierarchy.
Its purpose is to reduce the amount of separate chart information a Strat trader has to mentally assemble while preserving the underlying price-action structure.
Indicatore
Equalhigh True FVG Scanner# Equalhigh — True FVG Scanner
### User Guide · Version 5.2
Equalhigh True FVG Scanner combines filtered Fair Value Gaps, confirmed swing levels and classic two-candle gaps from a lower timeframe.
Its purpose is to organize potential reaction areas into a readable price map. It is an indicator, not an automated trading strategy.
## 1. Three Different Types of Levels
**Fair Value Gaps — turquoise and pink**
FVGs are detected on the chart timeframe using three consecutive candles:
* Bullish: the third candle’s low is above the first candle’s high.
* Bearish: the third candle’s high is below the first candle’s low.
The rectangle marks the space between those prices. The middle line represents the 50% level, also called Consequent Encroachment.
**Confirmed swing levels — gold**
These horizontal lines mark confirmed pivot highs and lows. By default, a pivot requires five candles on each side.
The line starts when the pivot is confirmed, five candles after the turning point. A closing break above a swing high or below a swing low removes that level. A wick alone does not remove it.
These levels do not contribute to the FVG score.
**Classic lower-timeframe gaps — blue/violet**
These use two consecutive candles on the selected lower timeframe:
* Gap up: the current low is above the previous high.
* Gap down: the current high is below the previous low.
These are complete gaps between candle ranges, not simply differences between the previous close and the next open. They are tracked independently of FVGs.
## 2. How FVGs Are Selected
Every displayed FVG must meet the minimum gap-size requirement and the middle-candle displacement requirements.
With the default settings:
* Minimum FVG size: 0.10 ATR.
* Minimum middle-candle body: 0.80 ATR.
* Minimum body-to-range ratio: 65%.
* Structure break required: enabled.
* Minimum score: 70/100.
The structure-break check requires the middle candle to close beyond the highest high or lowest low of the preceding lookback window. The default lookback is ten candles.
This is a rolling-range break definition, not a full BOS/CHoCH classification system.
## 3. Understanding the Score
The creation score combines:
* Displacement: 25 points.
* Structure break: 25 points.
* Liquidity sweep: 20 points.
* Premium/discount location: 10 points.
* Freshness at creation: 10 points.
* Session criterion: 5 points.
* Opposite-coloured candle before displacement: 5 points.
The sweep check uses the first candle of the three-candle pattern: it must exceed a previous extreme and close back inside.
Premium/discount compares the FVG midpoint with the midpoint of the preceding rolling range, using 50 candles by default.
The opposite-coloured candle criterion is a simple proxy. It does not establish a validated Order Block.
When session scoring is disabled, both directions receive its five points.
**The score is a rule-based ranking, not a win probability.** It remains fixed after creation, including the initial freshness points. Subsequent mitigation is shown separately.
There is no higher-timeframe EMA or trend filter in this version.
## 4. Reading FVG States
**FRESH**
The zone has not been touched by a subsequent candle. Its border is solid.
**TOUCHED**
Price has reached the zone without reaching its midpoint. The border becomes dashed and the fill more transparent.
**MITIGATED 50%**
Price has reached or crossed the midpoint. The border becomes dotted and the median line becomes thicker and solid.
These states are confirmed at chart-candle close and retain the deepest penetration recorded.
With “Remove fully filled FVG” enabled, reaching the opposite boundary removes the zone, even with a wick. This removal rule operates independently of the closing-invalidation setting.
If full-fill removal is disabled, a filled zone is retained as a grey, frozen archive unless invalidated. Focused nearest-zone mode hides these archives.
## 5. Keeping the Chart Readable
“Show nearest active FVG only” displays two zones above and two below the last confirmed close by default.
Zones containing that price are also displayed, so the total can exceed four.
Distance is measured to the nearest zone boundary. Hidden zones continue to be tracked within the storage limit and can reappear as price approaches them.
FVG price cards show the upper boundary, midpoint and lower boundary.
Historical creation triangles are optional and disabled by default. They mark FVG creation, not confirmed trade entries.
## 6. Configuring Classic Gaps
Open section **“5. Classic two-candle gaps (lower timeframe)”**.
Automatic timeframe selection chooses a supported timeframe approximately one-quarter of the chart timeframe. Disable it to select a lower timeframe manually.
Both initial size filters apply:
* Minimum gap in ticks: 2 by default.
* Minimum gap relative to lower-timeframe ATR: 0.05 by default.
Set the ATR threshold to zero to use only the tick filter.
The script processes available lower-timeframe candles chronologically. Overlapping candle ranges reduce the remaining open gap. A complete overlap removes it.
A jump entirely across a gap does not count as a fill. A candle contained inside a gap can leave two separate open portions.
By default, the module stores up to 40 open portions and displays the nearest two per side, plus portions containing the reference price.
## 7. GAP Prices on the Right Scale
Enable **“GAP prices on the price scale”** to display the remaining upper and lower boundaries directly on the price scale.
Up to ten nearest visible gap portions receive native scale markers.
Also enable **“Labels on price scale”** in the indicator’s **Style** tab. TradingView’s chart settings must permit indicator value labels.
Native scale markers show boundary prices. Optional floating GAP cards additionally show direction and timeframe.
The floating cards use a bar-based offset. They are not fixed to the screen edge.
## 8. Updates and Alerts
FVG creation, mitigation and swing confirmation use closed chart candles.
Classic gaps are also committed at chart-candle close. On a daily chart, their displayed state therefore updates when the daily candle closes.
Available alerts cover:
* New qualifying bullish FVG.
* New qualifying bearish FVG.
* New classic bullish lower-timeframe gap.
* New classic bearish lower-timeframe gap.
Alerts are independent of proximity visibility. A classic-gap creation alert can occur even if that gap was subsequently filled within the same chart candle.
Use “Once Per Bar Close” when configuring alerts.
## 9. Practical Limits
Lower-timeframe history depends on TradingView’s available data and your plan. The coverage panel shows the first processed date and latest update; older gaps may be outside coverage.
Storage limits can discard older zones or gap portions. Missing lower-timeframe data can also limit tracking.
Gap filling is inferred from candle high/low ranges, not transaction-by-transaction data.
Use standard time-based candlestick charts for interpretation. Synthetic candles can produce different patterns.
These levels are areas to observe, not guaranteed support, resistance or future targets. Neither a high score nor an open gap guarantees a reversal or eventual fill.
Indicatore
Indicatore
52 Week High/Low Offset ScreenerTitle:
52 Week High/Low Offset Screener
Visibility: Open (recommended) or Protected
Category: Indicator (not overlay)
Companion script: 52 Week High/Low (Current & Offset)
→ After the indicator is published, paste its script URL here in the description
(English NOTES / German HINWEISE).
----- Description (paste below; English first) -----
█ OVERVIEW
This is a Pine Screener companion to “52 Week High/Low (Current & Offset)”.
It scans a watchlist for where price sits relative to a lagged 52-week high/low (default offset: 52 weeks). You can constrain those distances in the script settings and/or with column filters in the Pine Screener.
Same calculation as the chart indicator. This script does not overlay on price; it outputs columns and a Hit flag.
This is a scan helper, not a buy or sell signal.
█ HOW TO RUN THE SCAN
1. Add this script to your Favorites (star). It will not appear in Pine Screener otherwise.
2. Open Products → Screeners → Pine (or tradingview.com/pine-screener/).
3. Choose a watchlist (keep it under 1,000 symbols).
4. Select “52 Week High/Low Offset Screener”.
5. Set the timeframe (daily is typical) and optional distance filters in the script settings.
6. Click Scan.
7. To apply the built-in distance filters, add a column filter: Hit = 1.
Only one Pine script can be used per scan.
█ COLUMNS
• Hit — 1 if all enabled script filters match, otherwise 0
• Distance % nearer offset — distance to the closer of the two offset levels
• Nearer to (1=High, −1=Low)
• Distance % offset high / offset low
• Offset high / Offset low — lagged 52-week levels
• Current 52W high / Current 52W low
• Close
Distance formula:
(close − offset level) / close × 100
Positive = price above that level, negative = below.
█ DISTANCE FILTERS (SCRIPT SETTINGS)
Disabled filters are ignored. All enabled filters must pass for Hit = 1.
• Side: All / only nearer to offset high / only nearer to offset low
• Constrain nearer distance (from % / to %)
• Constrain distance to offset high
• Constrain distance to offset low (DCA-style example: −15 to +8)
• Only below offset low
• Only above offset high
You can also filter on the columns themselves. Numeric filters are literal:
• Distance % offset low < 1 includes +0.08 (slightly above the low) and −16 (below the low)
• Below the offset low only: Distance % offset low < 0
• At least 1% below the low: Distance % offset low < −1
• Within 1% of the low: between −1 and 1
█ ALERT
Alert condition “52W Offset Hit” fires when a symbol matches the script’s distance filters.
█ NOTES
• Uses 52 weekly bars and a weekly offset; the current 52-week high/low includes the developing week.
• Chart companion: “52 Week High/Low (Current & Offset)”.
(Add the published indicator URL here after step 1 of the publishing sequence.)
This script does not generate trading signals and is not investment advice.
--------------------------------------------------------------------------------
DEUTSCH
█ ÜBERBLICK
Das ist der Pine-Screener zum Indikator „52 Week High/Low (Current & Offset)“.
Er scannt eine Watchlist danach, wo der Kurs relativ zu einem zeitversetzten 52-Wochen-Hoch/-Tief steht (Standard-Offset: 52 Wochen). Diese Abstände kannst du in den Skript-Einstellungen und/oder über Spaltenfilter im Pine Screener eingrenzen.
Dieselbe Berechnung wie der Chart-Indikator. Dieses Skript liegt nicht über dem Kurs; es liefert Spalten und ein Hit-Flag.
Das ist eine Scan-Hilfe, kein Kauf- oder Verkaufssignal.
█ SCAN AUSFÜHREN
1. Dieses Skript zu den Favoriten hinzufügen (Stern). Sonst erscheint es nicht im Pine Screener.
2. Products → Screeners → Pine öffnen (oder tradingview.com/pine-screener/).
3. Eine Watchlist wählen (unter 1.000 Symbole halten).
4. „52 Week High/Low Offset Screener“ auswählen.
5. Timeframe setzen (typisch Tageschart) und optional die Abstandsfilter in den Skript-Einstellungen.
6. Scan klicken.
7. Um die eingebauten Abstandsfilter anzuwenden, Spaltenfilter setzen: Hit = 1.
Pro Scan kann nur ein Pine-Skript verwendet werden.
█ SPALTEN
• Hit — 1, wenn alle aktivierten Skript-Filter zutreffen, sonst 0
• Distance % nearer offset — Abstand zum näheren der beiden Offset-Niveaus
• Nearer to (1=High, −1=Low)
• Distance % offset high / offset low
• Offset high / Offset low — zeitversetzte 52-Wochen-Niveaus
• Current 52W high / Current 52W low
• Close
Abstandsformel:
(Schlusskurs − Offset-Niveau) / Schlusskurs × 100
Positiv = Kurs über diesem Niveau, negativ = darunter.
█ ABSTANDSFILTER (SKRIPT-EINSTELLUNGEN)
Deaktivierte Filter werden ignoriert. Alle aktivierten Filter müssen für Hit = 1 gleichzeitig erfüllt sein.
• Side: All / only nearer to offset high / only nearer to offset low
• Constrain nearer distance (from % / to %)
• Constrain distance to offset high
• Constrain distance to offset low (DCA-Beispiel: −15 bis +8)
• Only below offset low
• Only above offset high
Du kannst auch direkt über die Spalten filtern. Numerische Filter gelten wörtlich:
• Distance % offset low < 1 enthält +0,08 (knapp über dem Tief) und −16 (unter dem Tief)
• Nur unter dem Offset-Tief: Distance % offset low < 0
• Mindestens 1 % unter dem Tief: Distance % offset low < −1
• Höchstens 1 % vom Tief entfernt: zwischen −1 und 1
█ ALERT
Die Alert-Bedingung „52W Offset Hit“ löst aus, wenn ein Symbol die Abstandsfilter des Skripts erfüllt.
█ HINWEISE
• Nutzt 52 Wochenkerzen und einen Wochen-Offset; das aktuelle 52-Wochen-Hoch/-Tief bezieht die laufende Woche ein.
• Chart-Begleiter: „52 Week High/Low (Current & Offset)“.
(Nach der Indikator-Veröffentlichung hier die Skript-URL einfügen.)
Dieses Skript erzeugt keine Handelssignale und ist keine Anlageberatung.
Indicatore
52 Week High/Low (Current & Offset)Title:
52 Week High/Low (Current & Offset)
Visibility: Open (recommended) or Protected
Category: Overlay / indicator
Companion script: 52 Week High/Low Offset Screener
----- Description (paste below; English first) -----
█ OVERVIEW
This indicator plots two 52-week ranges at once:
• Current 52-week high/low, including today’s price, as two horizontal lines.
• Historical 52-week high/low, lagged by a user-defined number of weeks, as a full history.
The current range always moves with price. After a sharp rally or sell-off that can make the live 52-week band less useful for context (for example dollar-cost averaging). The offset range shows where the 52-week high and low stood N weeks ago, before the latest move fully rewrote those extremes.
A distance label shows how far the close is from the nearer offset level, in percent of the current price. Positive = price is above that level, negative = below.
This is a positioning tool, not a buy or sell signal.
█ HOW IT WORKS
Current 52-week high/low
Calculated on the weekly timeframe over 52 weeks and combined with the developing week’s high/low on the chart timeframe, so today’s price is included.
Historical 52-week high/low (offset)
The same 52-week calculation, shifted by N weekly bars (default: 52). The offset is applied on the weekly timeframe, not in chart bars, so “52 weeks” remains 52 weeks on a daily chart.
Distance %
(close − offset level) / close × 100
The label is attached to whichever offset level is closer in price:
• Orange = nearer the offset high
• Teal = nearer the offset low
If the current 52-week high and the offset high print as the same price, they are merged into one label: “52W High = Offset”. The same logic applies independently to the low.
█ HOW TO USE
1. Add the script to a chart (daily is a typical timeframe).
2. Set Historical offset (weeks). Default is 52 (about one year); 13 ≈ one quarter, 4 ≈ one month.
3. Read price against the white historical path, not only against the green/red current lines.
4. Use the distance label and the table (Current vs −Nw) for a quick readout.
Reading for DCA-style context (not advice):
• Near the offset low, slightly negative or slightly positive → closer to the older low.
• Near the offset high, small negative → still below the older high, relatively expensive vs that band.
• Near the offset high, positive → price has left the older high.
█ SETTINGS
52-week setup
• Basis for 52-week values: Highs/Lows (default) or Close
• Historical offset (weeks)
Current 52W High/Low
• Horizontal lines, colors, width, style (solid / dashed / dotted), price labels
Historical 52W High/Low (Offset)
• History on/off, colors, fill, fill color
• In the Style tab, historical lines default to dashed and can be switched to solid or dotted
Info panel
• Table on/off, position, distance label
█ NOTES AND LIMITS
• 52 weeks means 52 weekly bars, not exactly 365 calendar days.
• The current 52-week high/low updates with the developing week.
• The offset uses closed weekly values (no lookahead inside the forming week).
• Companion screener: “52 Week High/Low Offset Screener” (add to Favorites, then Products → Screeners → Pine).
This script does not generate trading signals and is not investment advice.
--------------------------------------------------------------------------------
DEUTSCH
█ ÜBERBLICK
Der Indikator zeigt zwei 52-Wochen-Spannen gleichzeitig:
• Das aktuelle 52-Wochen-Hoch/-Tief inklusive heutigem Kurs, als zwei horizontale Linien.
• Das historische 52-Wochen-Hoch/-Tief, um eine wählbare Anzahl Wochen versetzt, als vollständigen Verlauf.
Die aktuelle Range wandert immer mit dem Kurs. Nach einer starken Rally oder einem Ausverkauf ist das live 52-Wochen-Band für den Kontext oft weniger nützlich (zum Beispiel beim Averagen / DCA). Die Offset-Range zeigt, wo Hoch und Tief vor N Wochen standen, bevor die jüngste Bewegung diese Extreme überschrieben hat.
Das Abstands-Label zeigt, wie weit der Schlusskurs vom näheren Offset-Niveau entfernt ist (in % vom aktuellen Kurs). Positiv = Kurs liegt darüber, negativ = darunter.
Das ist eine Lagehilfe, kein Kauf- oder Verkaufssignal.
█ BERECHNUNG
Aktuelles 52-Wochen-Hoch/-Tief
Berechnung auf dem Wochen-Timeframe über 52 Wochen, kombiniert mit dem laufenden Wochenhoch/-tief auf dem Chart-Timeframe, damit der heutige Kurs einbezogen wird.
Historisches 52-Wochen-Hoch/-Tief (Offset)
Dieselbe 52-Wochen-Berechnung, um N Wochenkerzen verschoben (Standard: 52). Der Versatz greift auf dem Wochen-Chart, nicht in Chart-Balken. „52 Wochen“ bleiben also auch auf dem Tageschart 52 Wochen.
Abstand %
(Schlusskurs − Offset-Niveau) / Schlusskurs × 100
Das Label hängt an dem Offset-Niveau, das preislich näher liegt:
• Orange = näher am Offset-Hoch
• Türkis = näher am Offset-Tief
Sind aktuelles 52W-Hoch und Offset-Hoch als derselbe Preis dargestellt, werden sie in einem Label zusammengefasst: „52W High = Offset“. Dieselbe Logik gilt unabhängig fürs Tief.
█ NUTZUNG
1. Skript auf einen Chart legen (Tageschart ist ein üblicher Timeframe).
2. Historical offset (weeks) einstellen. Standard ist 52 (ca. ein Jahr); 13 ≈ ein Quartal, 4 ≈ ein Monat.
3. Den Kurs gegen den weißen historischen Verlauf lesen, nicht nur gegen die grünen/roten aktuellen Linien.
4. Abstands-Label und Tabelle (Current vs. −Nw) für die schnelle Ablesung nutzen.
Lesart für DCA-Kontext (keine Empfehlung):
• Nah am Offset-Tief, leicht negativ oder leicht positiv → näher am älteren Tief.
• Nah am Offset-Hoch, leicht negativ → noch unter dem älteren Hoch, relativ teuer zu diesem Band.
• Nah am Offset-Hoch, positiv → der Kurs hat das ältere Hoch verlassen.
█ EINSTELLUNGEN
52-week setup
• Basis for 52-week values: Highs/Lows (Standard) oder Close
• Historical offset (weeks)
Current 52W High/Low
• Horizontale Linien, Farben, Stärke, Stil (solid / dashed / dotted), Preis-Labels
Historical 52W High/Low (Offset)
• Verlauf an/aus, Farben, Füllung, Füllfarbe
• Im Tab Style sind die historischen Linien standardmäßig gestrichelt und können auf durchgezogen oder gepunktet gestellt werden
Info panel
• Tabelle an/aus, Position, Abstands-Label
█ HINWEISE UND GRENZEN
• 52 Wochen bedeutet 52 Wochenkerzen, nicht exakt 365 Kalendertage.
• Das aktuelle 52-Wochen-Hoch/-Tief aktualisiert sich mit der laufenden Woche.
• Der Offset verwendet geschlossene Wochenwerte (kein Vorgriff innerhalb der entstehenden Woche).
• Begleit-Screener: „52 Week High/Low Offset Screener“ (zu den Favoriten, dann Products → Screeners → Pine).
Dieses Skript erzeugt keine Handelssignale und ist keine Anlageberatung. Indicatore
CISD Order Block+ (M1D)CISD Order Block+ finds the candle that changed the state of delivery and turns it into the order block you deal from. A run of down candles delivers lower; price then closes back above the highest body edge of that run. That reclaim is the change in the state of delivery, and the candle it reclaimed is a bullish order block — its body is the array, its midpoint is the entry, and the range it delivered through projects the targets. Bearish mirrors it exactly. Nothing engages until liquidity has been swept, and one raid produces one setup. It maps structure. It does not fire trades.
The sequence it looks for
Bullish below; bearish mirrors.
Liquidity is taken. Price wicks through a swing low and closes back above it — sellside raided and rejected. With no sweep there is no setup, and the swing that was taken is consumed, so the same low cannot be raided twice.
Delivery runs down. Two or more consecutive down candles print. This is the leg that did the raiding.
The run is reclaimed. Within a set window of bars, a candle CLOSES back above the run's highest body edge. That close is the change in the state of delivery.
The origin candle becomes the order block. The highest-bodied candle of the run, the one price just closed back over, which is usually but not always the run's first candle. Its body high is the level, its body midpoint is the entry, and its own body low is the distal edge.
The targets project. The run's body-to-body range, cast forward past the level in standard deviations.
The anchor is the point of the whole thing. Most implementations mark the last down candle before the up move, or measure the midpoint across the entire displacement leg. This one anchors on the run's extreme body — the level whose reclaim actually reverses the delivery — and takes its 0.5 from that single candle's own body, not from the leg. Those produce different prices, and the difference is where you get filled.
These are established Inner Circle Trader concepts — the change in the state of delivery, the order block, the liquidity raid, consequent encroachment and standard deviation projections. This script is an original implementation of them.
One raid, one setup
A down leg is rarely a single run. It is more often three down, a pause, two down, a pause, two more — each with its own body high sitting at a different price. A rally back through that leg closes above each of those levels in turn, on different bars, which is how a CISD tool ends up printing four or five setups off one raid.
This script treats that as one event. When a setup confirms, every other pending run in that leg is discarded and the sweep that produced it is marked as used; the next setup on that side requires a new sweep. The one that survives is the FIRST close that reverses the delivery, not the highest level, because the run nearest the low is the one that actually delivered into the raid. The higher runs further back up the leg are old delivery, and a close through those comes after the move has already gone.
What it draws
The CISD level. A solid line at the origin candle's body high, anchored at the candle that formed it and tagged CISD at its right end. This is the trigger — the price whose reclaim made the setup, and the price whose loss ends it.
The 0.5. A dotted line at the consequent encroachment of that candle's body, tagged 0.5. The entry level: the discount half of the block on a bullish setup, the premium half on a bearish one. Both the line and its tag can be turned off independently.
The swept level. A dotted line at the raided level, running from the swing that formed it to the candle that took it, with a small x centred on the line. It shows the liquidity the whole setup was built on, and it belongs to the setup — when the block fails, the mark goes with it.
The distal edge. The far side of the origin candle's body, dotted, off by default. Turn it on for the full three-level block.
Standard deviations. The unit is the run's body-to-body range — the highest body edge to the lowest body edge across every candle in the run, so a three-candle run measures all three — projected past the CISD level at 1, 2, 2.5 and 4 by default, the multiples editable as a list. They draw as short stubs numbered on their left rather than as extended levels, and they are carried by the latest setup only: four multiples on four live setups is thirty-two objects and reads as a grid, and targets only matter for the setup you are in. Off by default, since projections sit far from price and stretch the price scale.
The block as a zone. Available behind an input, off by default. The levels are the thing; the box is optional.
Why the chart stays clean
Five things retire drawings, so nothing accumulates.
Failure erases. A set is deleted the moment price closes back through its CISD level. Delivery has reverted, the block is spent, and it leaves — lines, tags, sweep mark and all.
One price, one level. A new set whose level lands within half a body of a live one replaces it, on either side. They are one level re-detected as price chops around it, and two tags at one price is two names for one thing.
Age retires. A level price never closed back through would otherwise stay live forever. Sets older than a configurable age are dropped.
Live sets are capped. Oldest first, past a set limit.
Bodyless origins never qualify. An origin candle with almost no body is rejected outright. It is not an array, and its level and its 0.5 would print on top of each other.
A setting keeps failed sets on the chart, redrawn dotted and stripped of their projections, for anyone who wants the record instead of the read.
Everything is drawn black by default so the chart reads as one system rather than a colour code. State is carried by line style instead: solid means the level is live, dotted means it is reference. Every colour is an input if you want direction back in the hues.
Reversals
When a block fails it is not merely deleted, it arms the other side. The level that just failed IS the liquidity that was taken, so the opposite setup can confirm on the bar the failure happens rather than waiting for a fresh swing to form and confirm. Pivot confirmation is inherently late — a swing is only known once the bars either side of it exist — and on a sharp turn that lateness is the difference between marking the reversal and missing it. The behaviour is a setting, and turning it off restores strict pivot-only raids.
Reading it in practice
The CISD line is the trigger, not the entry. The setup is confirmed the moment price closes back through it; what you want next is the retrace into the 0.5, which is the half of the block delivering at a discount on a long. Stop beyond the distal edge — the far side of the origin candle's body — and let the standard deviation stubs frame where the leg is projecting toward. The sweep mark tells you which pool funded the move, which is usually the first thing to check when deciding whether the setup has a story behind it.
The setup ends when price closes back through the CISD level. That is the same line that confirmed it, and the script treats it as the invalidation, which is why a failed set erases itself.
Method and repainting
All detection evaluates on closed bars. The run, the reclaiming close, the sweep and the invalidation are confirmed on candle close, never intrabar — an in-progress candle, wick included, never creates or removes a set. Swing points come from a standard pivot and confirm the configured number of bars after they print, which is inherent to pivot detection: a swing is only known once the bars either side of it exist. Levels anchor to the candle that formed them and are drawn a fixed number of bars past the reclaim.
Alerts fire once per bar close on a confirmed setup.
Settings
Sweep gate: whether a sweep is required at all, pivot length, whether a sweep means a wick through with a close back inside or a close through, how far a raid may precede the run, whether the swept level is marked, one setup per sweep, whether a failed setup counts as a raid, and a minimum bar gap between setups on a side that applies only when the sweep gate is off.
Detection: minimum and maximum candles in the run, the earliest and latest bar of the reclaim window, a minimum origin body as a multiple of ATR, and which side to detect — both, bullish only or bearish only.
Drawing: the 0.5 line and its label, the distal edge, zone mode, bars drawn past the reclaim, the cap on live sets, whether failed sets are kept, merging sets at the same price, and the age at which a set retires.
Standard deviations: on or off, latest set only, the multiples list, whether the unit measures the whole run or the origin candle alone, stub length and stub offset.
Style: a colour per element and one label size for everything.
Analytics only
This is a decision-support tool for discretionary ICT study. It maps a structural sequence — a raid, a delivery leg, and the close that reverses it — and marks the levels that sequence produces. It contains no buy or sell signals and it does not tell you when to enter or exit. Its alerts announce that the pattern completed; they are notifications, not trade instructions.
Disclaimer
This is a decision-support tool for discretionary ICT trading. It is not financial advice, and no market's past behaviour is indicative of future results. Indicatore
Reversal Radar PRO | Market Tops & Bottoms
↺ Reversal Radar PRO — Tops & Bottoms
Most “reversal” tools fire one arrow and disappear. This one runs three layers: a heads-up while the bar is still forming, a confirmed print after the swing is locked, and a live status on whether that reversal is still valid.
The point is not to catch every wick. It is to grade the turn, map the zone, and tell you when the chase is already late.
① Early-warning
Live-bar gauge. It can repaint — that is stated on purpose. Use it as danger / opportunity forming, not as an entry.
② Confirmed
Pivot-locked after the right-side bars. Does not repaint. Weighted 0–100 confidence with a grade, a vote floor, and a cooldown. Factors that can vote: RSI extreme, RSI divergence (quality-scored), volume climax, Bollinger pierce, over-extension from the mean, Stoch-RSI, wick rejection, engulfing, higher-TF RSI, liquidity sweep. Regime can boost or cut the score. Hidden divergence trims it — that is continuation, not a turn.'
③ Follow-through
Once a confirmed top or bottom is on, the radar tracks:
Active / late / soft invalid / hard invalid / target hit
Soft and hard invalidation distances
Chase quality (good → poor) vs progress to target
Mapped target and R:R
🗺 On the chart
Confirmed labels (confidence + grade) or simple arrows
Tiny diamonds for early-warning
Reversal zone boxes at the pivot
Clustered S/R that merge nearby swings, count touches, and flip when broken
📟 Dashboard
Regime and “best play” (fade the trend, or both sides). Trend efficiency. Volatility state. RSI / HTF RSI / Stoch-RSI. Bollinger position. Extension. Volume vs average. Divergence quality. Early-warn reading. Active signal, status, chase, target. Nearest S/R. Last print and how many bars ago.
🎯 How to use it
Wait for confirmed unless you accept that early-warning will flicker. In a strong uptrend, bottoms are the preferred fade — not every red wick. If chase already reads late, you missed the turn; do not market-order the remainder. Hard invalidation ends the idea. Soft invalidation is a warning, not a rewrite of history. Indicatore
Smart Buy Sell Indicator V1This indicator is designed to identify **potential trend reversals and momentum-based trading opportunities** using a combination of **two EMAs and RSI**.
#### 📊 Indicators Used
Fast EMA (Default: 9 EMA): Tracks short-term price movement.
Slow EMA (Default: 21 EMA): Identifies the broader short-term trend.
RSI (Default: 14): Confirms the strength and momentum of the move.
### 🟢 BUY Signal
A BUY signal is generated when:
The 9 EMA crosses above the 21 EMA, indicating a possible upward trend reversal.
RSI is 50 or above, confirming positive momentum.
How to use: Consider the BUY signal as an indication of bullish momentum. It can be used for a fresh entry or to identify a possible continuation of an upward move.
### 🔴 SELL Signal
A SELL signal is generated when:
The 9 EMA crosses below the 21 EMA, indicating a possible downward trend reversal.
RSI is 50 or below, confirming negative momentum.
How to use: Consider the SELL signal as an indication of weakening momentum or a potential bearish trend. It can be used to exit a long position or, depending on your trading strategy, identify a potential short-selling opportunity.
### ⚠️ Important Usage Tips
* Best used on **liquid stocks and indices.
* The indicator works better when the market is trending.
* Avoid relying solely on signals during **sideways or highly volatile markets**, where EMA crossovers may generate false signals.
* Always consider **support/resistance, price action, volume and the overall market trend** before taking a trade.
* Use an appropriate **stop-loss**, preferably based on the recent swing low for BUY trades and recent swing high for SELL trades.
### In Simple Terms
>EMA crossover identifies the change in trend, while RSI confirms whether momentum supports that direction.
This makes the indicator useful for traders looking for simple, rule-based BUY and SELL signals rather than relying on EMA crossovers alone.
Indicatore
Global Net Liquidity (5-Bank)Global Net Liquidity (5-Bank)
A USD proxy for usable global liquidity:
Fed assets + ECB + BoJ + PBoC + BoE
− US Treasury General Account (TGA)
− Fed overnight reverse repo (RRP)
This is not M2 and not Fed-only net liquidity. It is the standard 5-bank reconstruction used on public charts. It will not match a 16-bank internal series exactly, but the level and shape should rhyme: ~31T peak in 2021–22, ~25T now.
How to read
• Rising and within ~8% of the last cycle peak → liquidity tailwind for BTC; alts can work.
• Flat and still well below that peak → grind. BTC over alts. Do not treat a price squeeze as proof liquidity turned.
• Falling → headwind. Cash rules dominate.
• US row: RRP is no longer the drain. TGA is. A TGA spend adds liquidity; a TGA refill removes it.
Units
FRED and TradingView do not share one scale (WALCL/TGA in millions, RRP in billions or raw dollars, JPNASSETS in 100 million yen or yen). The script auto-detects and clamps each component so a single bad print cannot send the axis to −20,000T. If Level is not roughly 25–27T, a feed changed — do not use the panel.
Use
Add to a separate pane on BTCUSD or SPX, weekly preferred. The table is the decision layer. The gold line is the history. This is a regime overlay, not a buy/sell signal.
Not financial advice. Central-bank data is lagged, FX-translated, and revised. Indicatore
Phoenix Ascending 2.6Overview
This is a modernized Pine Script v6 update of the original "Phoenix Ascending 2.201" indicator, originally published by WyckoffMode (with script contributions from LazyBear, xSilas, and Ni6HTH4wK). Since the original script appears to no longer be actively maintained, I have updated the code to the latest Pine Script version to ensure it continues running efficiently, while keeping the original mathematical logic exactly the same.
What is Phoenix Ascending?
Phoenix Ascending is a comprehensive, multi-component momentum and money-flow oscillator. Rather than relying on a single metric, it aggregates several popular momentum indicators to create a smoothed, high-conviction market gauge.
At its core, the script calculates two main averages:
The "Tradition" Index: An average of TCI (Trade Channel Index), Money Flow (MF), and the Relative Strength Index (RSI).
The "Phoenix" Index: An average of TCI, CSI, Money Flow, and a Williams %R derivative (Willy).
By blending these components, the indicator filters out market noise and provides a clearer view of underlying buying and selling pressure.
How to Read the Indicator
The indicator plots several distinct visual elements on the oscillator panel:
Green Line (Tradition): Acts as the primary fast signal line tracking current price momentum.
Red Line (Smoothed RSI): A slower moving average of the Green Line.
LSMA (Least Squares Moving Average): A regression line that helps identify the true underlying trend direction.
Energy (Area/Histogram): A shaded region that visualizes the spread and momentum intensity between the fast and slow signal lines.
Pressure Dots (Circles): These appear at the extreme bands (below 20 or above 80) to signal extreme overbought or oversold conditions where a reversal is highly probable.
How to Use It in Trading
Trend Reversals: Watch for the Green Line to cross over the Red Line and LSMA from below 20 (oversold) for a bullish entry signal. Conversely, a cross downward from above 80 (overbought) signals a bearish reversal.
Momentum Strength: Use the shaded "Energy" area to gauge the strength of a move. Expanding energy confirms the trend, while contracting energy warns of consolidation or a fading move.
Extreme Zones: Pay close attention to the "Pressure" dots. When these populate at the top or bottom of the oscillator, it suggests the current move is exhausted and a mean-reversion setup is forming.
Credits
All credit for the original concept, mathematics, and logic goes to WyckoffMode , along with the original open-source contributors ( LazyBear , xSilas , Ni6HTH4wK ). You can view the legacy version of this script here: Phoenix Ascending 2.201 by WyckoffMode .
You can also find some helpful videos on how to use the script there. Indicatore
Dual-Phase Reversal by DGTDual-Phase Reversal • Exhaustion, Pivots & Pressure
Dual-Phase Reversal (DPR) is a two-phase market exhaustion framework that tracks directional momentum through Momentum Exhaustion and Terminal Exhaustion . It combines sequential price conditions, Momentum Shift initiation, phase qualification, exhaustion progression, invalidation levels, Range Pivots, Volume Pressure, and Volume-Weighted Bars to provide a structured view of potential trend exhaustion and reversal conditions.
The framework is designed to distinguish between an initial loss of directional momentum and a subsequent terminal phase, while keeping the two stages logically independent.
Dual-Phase Exhaustion Framework
Momentum Exhaustion identifies an initial phase of directional overextension using a four-bar close relationship. A new phase begins only when a Momentum Shift occurs — a change in the direction of the four-bar close relationship. Sustained one-directional momentum therefore does not automatically initiate a new count.
The Momentum Exhaustion phase progresses through its sequential conditions and can receive a Q (Qualification) classification based on the corresponding price structure. Qualification describes the completed setup itself and is not required for the subsequent Terminal Exhaustion phase to begin.
Terminal Exhaustion begins when a Momentum Exhaustion phase completes count 9. It uses a separate set of price conditions to track the continuation of exhaustion toward a terminal phase. The Terminal Exhaustion phase progresses independently and can include an additional validation/failure condition during its progression.
Phase Levels & Invalidation
Upon completion of Momentum Exhaustion, the framework can project dynamic Support & Resistance levels derived from the completed phase. These levels remain active until price crosses the corresponding level.
Optional Invalidation Levels are provided for both Momentum Exhaustion and Terminal Exhaustion. These levels are derived from the price extremes established during the respective phase and provide a structural reference for when the exhaustion condition is considered invalidated.
Terminal Exhaustion can additionally calculate a Target Level from the price structure developed during its progression.
Range Pivots
The optional Range Pivot framework provides higher-timeframe Support (S), Pivot (P), and Resistance (R) levels.
The timeframe can be selected manually or determined automatically according to the chart timeframe, with support for 1H, 4H, Daily, Weekly, Monthly, Quarterly, and Yearly ranges.
Optional Developing Range Pivot projects Support, Pivot, and Resistance levels from the current, still-forming range — an early, real-time preview of the next range's pivot before it closes. Optional Historical Range Pivot instead displays the completed pivot levels of prior ranges, allowing the current range to be compared against past structure.
Volume Pressure
The optional Volume Pressure Oscillator evaluates buying and selling pressure by combining price movement within each bar's range with traded volume.
The resulting oscillator is normalized to a 0–100 scale, with configurable upper and lower bands. A signal line and histogram provide additional context for changes in pressure.
The pressure calculation excludes zero-range bars and handles markets where volume data is unavailable.
Dashboard
An optional, repositionable Dashboard table provides a compact, at-a-glance summary of the framework's current state on the last bar:
Momentum — which side (buy-side or sell-side) is currently progressing, and its step count out of 9
Terminal — which side is currently progressing, and its step count out of 13
Pivot — signed percentage distance from price to the nearest Range Pivot level
Pressure — the current Volume Pressure ratio, shown as a buying/selling percentage split
Each row includes a tooltip with additional detail. The table can be toggled on or off and repositioned to any chart corner.
Visuals & Reading the Framework
The All Sequence Steps display mode shows the progression of the Momentum and Terminal Exhaustion phases using compact sequential markers. Completed phases can instead be displayed selectively for a cleaner chart.
Volume-Weighted Bars optionally highlight bars according to their volume relative to a configurable volume moving average, helping distinguish unusually high and low volume activity.
DPR is best used as a contextual framework rather than a standalone reversal signal . Momentum Exhaustion identifies an initial state of directional overextension, while Terminal Exhaustion represents a later-stage continuation of that exhaustion process. Range Pivots, Support/Resistance, Invalidation, and Volume Pressure can be used together to assess the broader market context.
Alerts
Alerts are available for:
Momentum Exhaustion phase completion
Terminal Exhaustion phase completion
Momentum Exhaustion Support / Resistance crossings
Momentum & Terminal Exhaustion invalidation level crossings
Range Pivot level crossings
Volume Pressure entering overbought / oversold zones
High-volume bars
Alerts include the instrument and relevant price level where applicable.
DISCLAIMER
This script is intended for informational and educational purposes only. It does not constitute financial, investment, or trading advice. All trading decisions made based on its output are solely the responsibility of the user.
Indicatore
