MNQ Mission Control - Smart Block v8

Overview
MNQ Mission Control is a comprehensive decision-support dashboard built for intraday futures traders, specifically tuned for NQ/MNQ and ES/MES. Rather than producing buy/sell arrows, it acts as an accountability layer — synthesizing market internals, multi-timeframe trend structure, momentum, support/resistance proximity, and real-time risk/reward into a single unified score that helps traders avoid impulsive entries and stay aligned with higher-probability setups.
The core philosophy: a good dashboard tells you when NOT to trade just as clearly as when to engage. Signals are gated by R:R viability, trend alignment, and breadth confirmation, so the dashboard will actively block trades that look directionally correct but are structurally late or poorly located.
Key Features
Unified Scoring System (0–8 scale)
A dynamic scoring engine that scales based on data availability, weighing trend alignment, momentum, VWAP positioning, internals confirmation, and quality factors. Score is displayed alongside a master state: WAIT, LONG, SHORT, LONG BLOCKED, or SHORT BLOCKED.
NYSE Market Internals Integration

(Advance/Decline) with cumulative tracking and divergence detection
with 30-minute cumulative roll and high/low extremes
(Volume Difference) with delta tracking
VIX with configurable symbol input (supports TVC:VIX or CBOE:VIX) and trend direction
Cumulative TICK breadth divergence detection vs. price

Configurable Internals Refresh Timeframe
A dedicated input for the internals data refresh timeframe (default suitable for 30s/1m) to balance data freshness against repaint noise.
Multi-Timeframe Trend Engine
A 5/15 trend reading combines lower-timeframe momentum with higher-timeframe structure, producing readings like ▼▼ ALIGNED BEAR, ▲▲ ALIGNED BULL, or mixed states.
VWAP Band Positioning
Real-time classification of price relative to VWAP and its standard deviation bands (Upper Band, Mid-band, Lower Band) with point distance from VWAP.
Array-Based Support/Resistance Management
Dynamic S/R line detection with forward extension, automatic recycling for memory efficiency, and proximity-based level scoring. Resistance levels are framed as decision checkpoints, not automatic exit targets.
Risk/Reward Panel
ATR-based stop distance calculation paired with the nearest logical target (next S/R level), producing a live R:R ratio. The scoring engine uses this to block trades with unfavorable R:R, even when directional signals are otherwise valid.
Quality & Day Type Classification

Quality readings: Trend OK, Trend Expansion, Seller/Buyer Fatigue, Chop, Lunch Chop
Day Type detection: NORM VARIATION, TREND DAY, with live confirmation

Contextual Playbook Field
Strategy guidance that adapts to current conditions — e.g., "Swing 40-60pt moves" in normal variation, "Trend override: hold runners" once a trend day confirms, prompting traders to manage existing positions rather than initiate new entries late in extended moves.
Divergence Detection
Cumulative TICK vs. price divergence with bull/bear labels and visual indicators on the dashboard.
How to Use

Add the indicator to your NQ/MNQ or ES/MES chart (5m or 3m recommended for the primary execution timeframe).
Configure the VIX symbol input to match the feed you monitor elsewhere (TVC:VIX or CBOE:VIX — these can diverge slightly).
Set the Internals Refresh Timeframe based on your preference for freshness vs. stability (30s for active scalping, 1m for swing/positional intraday).
Read the dashboard top-down: Master score → Risk/Reward → Trend → VWAP → Levels → Market state → Internals → VIX → Quality → Day Type → Playbook.
Respect the BLOCKED states. If the dashboard says SHORT BLOCKED with a poor R:R, the directional bias is correct but the entry location is not. Wait for a pullback that improves R:R.
Combine timeframes. A WAIT on the lower TF with a clear directional bias on the higher TF often signals "wait for pullback, then engage."

Recommended Settings

Primary chart: 5m for execution, 3m for aggressive scalping
Secondary chart: 30m for higher-timeframe context
Internals refresh: 1m (balanced) or 30s (responsive)
VIX symbol: Match the feed used elsewhere in your platform
Session: Designed for RTH (9:30–16:00 ET) but functional in pre/post-market with reduced internals reliability

Notes & Disclaimers

Market internals (, , ) require NYSE data subscription for accurate real-time values.
VIX feed source matters: TVC:VIX and CBOE:VIX can produce slightly different values due to different update cadences and aggregation. Match this input to whatever you display elsewhere.
This indicator is a decision-support tool, not a signal generator. No indicator removes the need for risk management, position sizing discipline, or trade management skill.
Past performance of any condition or signal does not guarantee future results. Futures trading involves substantial risk of loss.
The "accountability buddy" framing is intentional: the dashboard's primary value is helping you slow down, evaluate context, and avoid low-quality entries — not replacing your judgment.

リリースノート

MNQ Mission Control - Smart Block v9
═══════════════════════════════════════════
v9 UPDATE — Day-Trader Stop Cap
═══════════════════════════════════════════

WHY THIS UPDATE MATTERS

ATR-based stops adapt to volatility, which is great —
but ATR is also timeframe-dependent. A 30-minute ATR
is naturally much larger than a 5-minute ATR because
30m bars contain more price action. The result: on
higher-timeframe charts, the indicator was suggesting
stop distances of 100-150+ points, which is appropriate
for multi-day swing trades but completely wrong for
intraday day trading.

The downstream effect was painful: those oversized
stops crushed the risk/reward calculation, which then
triggered the "LONG BLOCKED" or "SHORT BLOCKED" state
on setups that were directionally valid and would have
been clean trades on the 5-minute chart. Same instrument,
same moment in time, different verdict — purely because
of how ATR scales with timeframe.

THE FIX

Stop distance is now calculated two ways and the smaller
value wins:

1. Chart-native: current ATR × stop multiplier
(the old behavior, still used as the baseline)

2. 5-minute reference cap: 5-minute ATR × cap multiplier
(the new sanity check)

The 5-minute timeframe is treated as the "reference"
for what a reasonable intraday stop looks like. Higher
timeframes are still allowed to confirm trend direction,
HTF alignment, and structural context — but their stop
sizing gets pulled back to day-trader-appropriate levels.

WHAT YOU'LL SEE

On a 5-minute chart: No change to stop distance, no
📌 pin shown. The chart's ATR equals the reference,
so the cap is effectively a no-op.

On a 1-minute or 3-minute chart: No change. Smaller
timeframes have smaller ATR than the 5m reference, so
the cap doesn't activate. Tight scalp stops stay tight.

On a 15-minute, 30-minute, or 1-hour chart: Stop
distance drops significantly. A 📌 pin appears next
to the stop value in the Risk row to confirm the cap
is active. Risk/reward recalculates automatically using
the capped stop, which means fewer false BLOCKED
signals on valid trade setups.

The single fix corrects every downstream symptom in
one place: better stops, better R:R math, fewer false
blocks. Because stopDistance feeds the entire risk
chain, fixing it once heals everything below it.

NEW INPUTS (🎯 Risk Group)

- Cap stop by 5-minute ATR (day-trader mode)
Master toggle. Default ON. Turn off only if you
actually swing-trade overnight and want higher-TF
charts to use full chart-native ATR for stops.

- Stop cap = this × 5m ATR
The multiplier applied to the 5-minute ATR. Default
1.5, which mirrors the existing stop multiplier so
the 5m chart is unaffected. Drop to 1.2 for tighter
intraday stops, raise to 2.0 if you're getting
stopped out on normal noise.

USAGE NOTES

This update is designed for intraday traders who
flatten positions before the close. If you genuinely
hold trades overnight or for multiple days, toggle
the cap off so your stops can scale with the larger
higher-timeframe ATR.

For everyone else: the default settings should "just
work" — the cap activates silently on higher
timeframes, the 📌 lets you see when it's doing its
job, and your dashboard finally shows agreement
across timeframes instead of contradictory verdicts.

リリースノート

v10 — Soft-Internals Trend Path
Fixes an issue where clear price-action trend days were mislabeled as "NORMAL (range)" when NYSE breadth (A/D) was only leaning directionally rather than strongly. Previously the live Trend Day override required A/D to reach the ±500 "moderate" threshold, so a soft breadth reading could veto an obvious trend even with both timeframes aligned, price riding the VWAP band, and the day covering 75%+ of daily ATR.
The override now has two paths: the original strict-breadth path (unchanged), plus a new optional soft path where overwhelming price structure can confirm a Trend Day as long as internals merely agree in direction and aren't conflicting. The soft path keys off Day % of ATR instead of IB extension, since extension is mathematically suppressed on wide-IB days.
Two new inputs under 📅 Day Type: a toggle for the soft path (default on) and a Day % ATR floor for it (default 75). Toggle the path off to revert to prior behavior. No other logic changed.

リリースノート

v17 — Level Engagement (the big one)
What it actually fixes. Before this, parking near the high or low of day almost always read BLOCKED, even mid-trend. The cause was mechanical: at a fresh extreme during a strong push, the VWAP-band proximity check and the exhaustion engine (consecutive trend bars, VWAP stretch, volume climax) lit up together and tripped the "exhaustion at level" block. The dashboard couldn't tell the difference between price testing a level as resistance versus price making the level because it's the thing printing it right now.
The three states, and what each is telling you:
Expanding — fresh extreme within the last 2 bars, bar closed in the top/bottom third of its range, internals not diverging. This is the green light to stop fading your own trend. When you see this tag on the Risk row, the exhaustion-at-level block is suppressed and a strong continuation is allowed to read as live. Best use: this is your "it's okay to be in the trade while it's driving" confirmation — it does not mean enter blind, it means the dashboard is no longer vetoing a setup that price action already justifies.
Testing — at the extreme but no fresh print for several bars, or the bar is wicking. The level is acting as real resistance/support again, so the block returns. Best use: treat this exactly like the old behavior — this is where fades and rejections live, and where chasing gets punished.
Climax — 8+ consecutive trend bars with internals rolling over. Freshness this late is exhaustion, not strength, so the block stays on with a distinct label. Best use: this is the "the move is done, manage what you have, don't add" signal. It's the one that protects you from the top/bottom tick.
How to actually use it: let price action and your hand-drawn levels lead, as always. The tag is a second opinion on whether the move is alive or finished, not an entry trigger. The one number still worth pressure-testing live is the 8-bar climax edge — watch whether it feels early or late on your charts before touching it.
v16 — Room-Quality Ladder + Stop Modes
Room ladder. The Risk row now tells you how much room a scalp has on every trade — No room (<25pts) / Limited (25–40) / Scalp OK (40–60) / Room open (60+ or no real level ahead) — measured to the nearest real structure level, not an ATR guess. Best use: a fast pre-entry gut check. "Scalp OK" or "Room open" means your 40–60pt target has space; "Limited" or "No room" means you're entering into a wall and should either pass or treat it as a tiny scalp.
Stop modes. A dropdown — Conservative (30) / Normal (40) / Loose (50) / Custom — caps your scalp stop without editing numbers. Best use: this is the lever for the conservative-stop experiment we'd flagged. Normal (40) is your current behavior; flipping to Conservative (30) tightens R:R but you'll get stopped more on high-ATR days. Worth A/B-ing on a few sessions.
v15 — Scalp Risk Mode
This is the one that aligned the whole Risk row with how you actually trade. Instead of swing-sized targets, it evaluates each trade as a 40–60pt scalp: fixed target, fixed max stop, and it still defers to nearby structure when structure is closer than your scalp target. Best use: trust the R:R number on the Risk row now — it's finally computed against a scalp-realistic target, so a sub-1R reading is a genuine "this chase isn't worth it," not an artifact of a far-off swing level.
v11 — Intermarket Context (10Y Yield + NQ/ES)
Two context rows, display-only unless you opt them into the score. The 10Y yield moves inverse to the Nasdaq — falling yield supports your longs, rising yield supports your shorts, and a ⚠ flags a yield spike worth respecting. NQ vs ES shows whether tech is leading or lagging the broad market since the open. Best use: keep both off the score for now (they are by default) and read them as tiebreakers — if you're torn on a long and yields are spiking with NQ lagging ES, that's two soft strikes against it. The yield spike flag is the highest-value piece here; a sudden bond move is often the hidden reason a clean-looking setup fails.

昨日

リリースノート

v24.5.7.3 - Major Mission Control Update

This release rebuilds Mission Control around a fixed 5-minute signal engine, 15-minute confirmation, and 30-minute regime so the core dashboard remains consistent across chart timeframes.

KEY UPDATES

* Fixed 5m/15m/30m architecture
* Separate 10-point bull and bear scoring
* GO remains 8/10, CAUTION remains 7/10, with a 2-point minimum margin
* A/D, TICK, cumulative TICK, VOLD, VIX, and NQ vs ES leadership evaluated separately
* Two opposing internals downgrade GO to CAUTION; all three still prevent GO
* TICK wording now uses PERSISTENT instead of CONFIRMED

RISK AND STRUCTURE

* Structure-first stops use Manual S/R, swings, EMA21, or VWAP, with ATR as fallback
* Public defaults: 50-point target, 40-point minimum room, 40-point maximum stop, and 1.20 minimum R:R
* PDH/PDL, VAH/VAL, and Manual S/R remain terminal destinations
* Under strict continuation conditions, nearby HOD/LOD, swing, or IB levels may act as checkpoints
* Risk can display routes such as "via HOD" or "via LOD"
* Open room never removes scoring, VIX, divergence, exhaustion, stop-width, or R:R protections

OTHER IMPROVEMENTS

* GO EXTENDED warns against chasing stretched setups
* Level Engagement identifies expanding, testing, and climax conditions
* Volume Pace compares participation with the same time of day
* NQ vs ES leadership includes both session performance and recent relative movement
* Market internals now provide clearer strengthening, fading, improving, worsening, persistent, recovering, and conflict states
* Expanded dashboard, alerts, and CONTINUATION LONG/SHORT states

LATEST FIXES

* RTH High/Low targets are frozen to the active 5-minute signal reference
* Continuation measurement no longer depends on the final close-armed verdict
* Structural room measurement is separated from the internals/VIX veto
* A nearby checkpoint can be measured through without upgrading CAUTION to GO

Mission Control is a decision-support dashboard, not an automated entry system. Futures trading involves substantial risk.

HOW TO USE IT
Mission Control is a decision-support and accountability dashboard, not an automated entry system. Read the verdict together with Risk, Trend, VWAP, structure, internals, VIX/divergence, Volume Pace, Quality, Day Type, and Playbook. A directional bias can still be blocked when the entry is late, the stop is too wide, room is inadequate, or confirmation is deteriorating.

Designed primarily for NQ/MNQ intraday trading. NYSE internals require appropriate real-time data access. Futures trading involves substantial risk, and no indicator replaces position sizing, trade management, or independent judgment.

オープンソーススクリプト

TradingViewの精神に則り、このスクリプトの作者はコードをオープンソースとして公開してくれました。トレーダーが内容を確認・検証できるようにという配慮です。作者に拍手を送りましょう！無料で利用できますが、コードの再公開はハウスルールに従う必要があります。

magstud1

免責事項

これらの情報および投稿は、TradingViewが提供または承認する金融、投資、取引、またはその他の種類の助言もしくは推奨であることを意図したものではなく、またこれらに該当するものでもありません。詳細は利用規約をご覧ください。

オープンソーススクリプト

magstud1