OPEN-SOURCE SCRIPT
MTF Liquidity Stack (Zeiierman)
█ Overview
MTF Liquidity Stack (Zeiierman) is a multi-timeframe liquidity mapping indicator designed to identify, combine, and track unmitigated liquidity across higher-timeframe swing points, regional trading sessions, and previous-day extremes.
Instead of displaying every liquidity source independently, the indicator organizes multiple liquidity references into one unified structure:
• MTF Liquidity = confirmed swing highs and lows from up to five timeframes
• Session Liquidity = Asia, London, and New York session highs and lows
• Daily Liquidity = Previous Day High and Previous Day Low
• Liquidity Stack = multiple sources occupying the same price level
When several liquidity sources resolve to the same price, they are merged into a single level.
For example:
• 1h + 4h + 15m + Asia: means the same price is simultaneously recognized as a 1-hour swing liquidity level, a 4-hour swing liquidity level, a 15-minute swing liquidity level, and an Asia session liquidity level.
█ How It Works
█ How to Use
You can use MTF Liquidity Stack in four main ways: Liquidity Mapping, Liquidity Stacking, Session Trading, and Sweep Analysis.
⚪ Liquidity Mapping
The most direct use of the indicator is to identify liquidity that has not yet been traded through.
• Active horizontal lines represent unresolved liquidity.
• High-side levels mark confirmed highs that remain unswept.
• Low-side levels mark confirmed lows that remain unswept.
The right-side labels make it possible to immediately identify whether a level originates from:
• a higher timeframe
• a session
• PDH / PDL
• several sources simultaneously
This allows traders to quickly see where unresolved price structure remains above and below the market.
⚪ Liquidity Stacking
Liquidity becomes especially useful when several independent sources align at the same price.
For example:
• 1h + 4h: shows agreement between two timeframe structures.
• 1h + Asia + 4h: shows higher-timeframe liquidity aligned with a regional session extreme.
A larger stack does not guarantee that price will reverse from the level.
Instead, it identifies a price where multiple liquidity references overlap, making the area more important for contextual analysis.
⚪ Session Trading
Session liquidity tracks the completed highs and lows of Asia, London, and New York.
For example, after London closes:
• London High stays active until price trades above it
• London Low stays active until price trades below it
These levels can then be used to monitor later sweeps, reactions, and areas where session liquidity overlaps with higher-timeframe liquidity.
⚪ Liquidity Sweep Analysis
Track liquidity sweeps in real time as price trades through higher-timeframe, session, PDH / PDL, or Stacked Liquidity levels.
A sweep of Stacked Liquidity can carry more significance than a single-source sweep because multiple liquidity references are being taken at the same price.
After a sweep occurs, monitor the following price action for either:
• Rejection / reversal away from the swept level
• Continuation through the level in the direction of the move
The sweep itself is not the signal. It shows where liquidity has been taken and where the next price reaction may become important.
█ Settings
-----------------
Disclaimer
The content provided in my scripts, indicators, ideas, algorithms, and systems is for educational and informational purposes only. It does not constitute financial advice, investment recommendations, or a solicitation to buy or sell any financial instruments. I will not accept liability for any loss or damage, including without limitation any loss of profit, which may arise directly or indirectly from the use of or reliance on such information.
All investments involve risk, and the past performance of a security, industry, sector, market, financial product, trading strategy, backtest, or individual's trading does not guarantee future results or returns. Investors are fully responsible for any investment decisions they make. Such decisions should be based solely on an evaluation of their financial circumstances, investment objectives, risk tolerance, and liquidity needs.
MTF Liquidity Stack (Zeiierman) is a multi-timeframe liquidity mapping indicator designed to identify, combine, and track unmitigated liquidity across higher-timeframe swing points, regional trading sessions, and previous-day extremes.
Instead of displaying every liquidity source independently, the indicator organizes multiple liquidity references into one unified structure:
• MTF Liquidity = confirmed swing highs and lows from up to five timeframes
• Session Liquidity = Asia, London, and New York session highs and lows
• Daily Liquidity = Previous Day High and Previous Day Low
• Liquidity Stack = multiple sources occupying the same price level
When several liquidity sources resolve to the same price, they are merged into a single level.
For example:
• 1h + 4h + 15m + Asia: means the same price is simultaneously recognized as a 1-hour swing liquidity level, a 4-hour swing liquidity level, a 15-minute swing liquidity level, and an Asia session liquidity level.
█ How It Works
⚪ Multi-Timeframe Liquidity
The indicator tracks confirmed 3-candle swing highs and lows across up to five timeframes, together with session highs and lows from Asia, London, and New York, plus PDH / PDL.
Once confirmed, each liquidity level is anchored to its exact price origin and projected forward on the chart until price trades through it.
This creates a unified view of liquidity from multiple timeframes, sessions, and daily reference points without separating them into different systems.
The Levels setting controls how many recent unmitigated MTF swing highs and lows are kept for each active timeframe.
⚪ Auto Higher Timeframes
When Auto is enabled, any configured timeframe that is equal to or below the current chart timeframe is automatically promoted to a meaningful higher timeframe.
Duplicate effective timeframes are removed, with explicitly selected higher timeframes taking priority.
For example:
Chart = 1H
• TF 1 = 1H → promoted to 4H
• TF 2 = 4H → explicit 4H
• TF 3 = 1D
Because 4H already exists explicitly, the promoted duplicate is ignored.
The effective structure becomes:
• 4H
• 1D
⚪ Stacked Liquidity
When multiple liquidity sources share the same price and side, they are combined into a single Stacked Liquidity level.
For example:
• PDH + 1D + Asia: means the same price is recognized as the Previous Day High, a Daily swing level, and an Asia session level.
This makes areas where several independent liquidity references overlap immediately visible.
█ How to Use
You can use MTF Liquidity Stack in four main ways: Liquidity Mapping, Liquidity Stacking, Session Trading, and Sweep Analysis.
⚪ Liquidity Mapping
The most direct use of the indicator is to identify liquidity that has not yet been traded through.
• Active horizontal lines represent unresolved liquidity.
• High-side levels mark confirmed highs that remain unswept.
• Low-side levels mark confirmed lows that remain unswept.
The right-side labels make it possible to immediately identify whether a level originates from:
• a higher timeframe
• a session
• PDH / PDL
• several sources simultaneously
This allows traders to quickly see where unresolved price structure remains above and below the market.
⚪ Liquidity Stacking
Liquidity becomes especially useful when several independent sources align at the same price.
For example:
• 1h + 4h: shows agreement between two timeframe structures.
• 1h + Asia + 4h: shows higher-timeframe liquidity aligned with a regional session extreme.
A larger stack does not guarantee that price will reverse from the level.
Instead, it identifies a price where multiple liquidity references overlap, making the area more important for contextual analysis.
⚪ Session Trading
Session liquidity tracks the completed highs and lows of Asia, London, and New York.
For example, after London closes:
• London High stays active until price trades above it
• London Low stays active until price trades below it
These levels can then be used to monitor later sweeps, reactions, and areas where session liquidity overlaps with higher-timeframe liquidity.
⚪ Liquidity Sweep Analysis
Track liquidity sweeps in real time as price trades through higher-timeframe, session, PDH / PDL, or Stacked Liquidity levels.
A sweep of Stacked Liquidity can carry more significance than a single-source sweep because multiple liquidity references are being taken at the same price.
After a sweep occurs, monitor the following price action for either:
• Rejection / reversal away from the swept level
• Continuation through the level in the direction of the move
The sweep itself is not the signal. It shows where liquidity has been taken and where the next price reaction may become important.
█ Settings
- Auto: Automatically promotes enabled sources that are equal to or below the current chart timeframe. Explicit higher-timeframe sources take priority when duplicate effective timeframes occur.
- Levels: Controls the number of recent unmitigated swing highs and swing lows retained for each active timeframe source.
- TF 1 - TF 5: Enable or disable each MTF liquidity source and select its timeframe. Up to five timeframe sources can operate together.
- Mode: Selects the global session structure. Full uses the configured Full windows. AM switches Asia, London, and New York together to their configured AM windows.
- UTC: Controls the fixed UTC offset used for session timing and daily calculations. Session windows are defined from UTC+0 and shifted automatically.
- Asia: Enables Asia liquidity and controls its name, Full session window, AM session window, and color.
- London: Enables London liquidity and controls its name, Full session window, AM session window, and color.
- New York: Enables New York liquidity and controls its name, Full session window, AM session window, and color.
- Daily Reset: Clears both unmitigated and historical mitigated liquidity when a new calendar day begins.
- PDH / PDL: Enables Previous Day High and Previous Day Low liquidity tracking.
- Labels: Controls the size of liquidity origin labels and completed mitigation labels.
- History: Controls whether historical mitigated liquidity remains visible.
-----------------
Disclaimer
The content provided in my scripts, indicators, ideas, algorithms, and systems is for educational and informational purposes only. It does not constitute financial advice, investment recommendations, or a solicitation to buy or sell any financial instruments. I will not accept liability for any loss or damage, including without limitation any loss of profit, which may arise directly or indirectly from the use of or reliance on such information.
All investments involve risk, and the past performance of a security, industry, sector, market, financial product, trading strategy, backtest, or individual's trading does not guarantee future results or returns. Investors are fully responsible for any investment decisions they make. Such decisions should be based solely on an evaluation of their financial circumstances, investment objectives, risk tolerance, and liquidity needs.
オープンソーススクリプト
TradingViewの精神に則り、このスクリプトの作者はコードをオープンソースとして公開してくれました。トレーダーが内容を確認・検証できるようにという配慮です。作者に拍手を送りましょう！無料で利用できますが、コードの再公開はハウスルールに従う必要があります。
Access my indicators at: zeiierman.com
Join Our Free Discord: discord.gg/zeiiermantrading
Join Our Free Discord: discord.gg/zeiiermantrading
免責事項
これらの情報および投稿は、TradingViewが提供または承認する金融、投資、取引、またはその他の種類の助言もしくは推奨であることを意図したものではなく、またこれらに該当するものでもありません。詳細は利用規約をご覧ください。
オープンソーススクリプト
TradingViewの精神に則り、このスクリプトの作者はコードをオープンソースとして公開してくれました。トレーダーが内容を確認・検証できるようにという配慮です。作者に拍手を送りましょう！無料で利用できますが、コードの再公開はハウスルールに従う必要があります。
Access my indicators at: zeiierman.com
Join Our Free Discord: discord.gg/zeiiermantrading
Join Our Free Discord: discord.gg/zeiiermantrading
免責事項
これらの情報および投稿は、TradingViewが提供または承認する金融、投資、取引、またはその他の種類の助言もしくは推奨であることを意図したものではなく、またこれらに該当するものでもありません。詳細は利用規約をご覧ください。