업데이트됨 18시간 전

Sniper Trader V6.5 Pro SMC, FVGs & Volume Sweep Engine

Sniper Trader Pro is an all-in-one Smart Money Concepts (SMC) indicator designed to filter out market noise and identify high-probability institutional setups. Built for precision, this algorithm detects liquidity sweeps, Fair Value Gaps (FVGs), and volume-backed rejections, giving you a clear visual map of where the "Smart Money" is trapping retail traders.

Optimized for volatile assets like indices (NASDAQ/NQ, S&P500) on the 5-minute timeframe, this tool acts as a complete trading system.

Core Features

Dynamic Liquidity Boxes (FVGs): Automatically plots Demand (Aqua) and Supply (Red) zones based on momentum. The algorithm features a smart "garbage collector" that instantly deletes boxes once they are fully mitigated by price, keeping your chart perfectly clean.

Institutional Trend Filters: Integrates key dynamic support/resistance levels, including the 14 EMA, 80 HMA, 200 EMA, and the daily VWAP, allowing you to gauge the macro and micro trends at a glance.

Volume-Backed Sweep Signals: The indicator doesn't just look for wicks; it analyzes the relationship between wick size, body size, and relative volume. It plots clear "LONG" and "SHORT" triangles only when a rejection wick touches a key dynamic level (EMA/VWAP) and is backed by above-average volume.

Ultimate Sensitivity Engine: Fully customizable settings. You can adjust the required wick size, maximum opposite wick size, and volume multiplier to adapt the trigger sensitivity to the current market volatility.

How to Trade with Gems Sniper Trader Pro
This indicator is built to trade pullbacks into liquidity zones in the direction of the macro trend.

For a LONG Setup:

Ensure the price is trading above the 200 EMA (Macro Trend).

Wait for the price to pull back and enter an Aqua Demand Box.

Look for a green LONG triangle signal. This confirms a liquidity sweep bouncing off the 14 EMA, 80 HMA, or VWAP with institutional volume.

Place your Stop Loss safely below the sweep wick.

For a SHORT Setup:

Ensure the price is trading below the 200 EMA.

Wait for a fake breakout into a Red Supply Box.

Look for a red SHORT triangle rejecting the zone with volume.

Place your Stop Loss above the rejection wick.

Pro Tip:
Avoid taking signals that float in the middle of nowhere. The highest probability trades occur when the sweep signal perfectly aligns (confluence) with a Liquidity Box and a dynamic level like the VWAP.

릴리즈 노트

Update:
Corrected moving average settings. The logic is based on a 14 EMA and a 50 EMA setup. Optimized for 1-minute and 1-hour charts.
"The system generates precise LONG/SHORT sweep signals based on price interaction with the 14 EMA and VWAP, supported by volume analysis. The ORB-H, ORB-L, 50 EMA and 200 EMA are included as visual aids for intermediate and macro trend bias."

릴리즈 노트

- Cleaner Execution & Full Control: Automated entry labels were removed because they frequently caused confusion and false entries. You now have the freedom to take precise, manual entries by looking for matching confluences—such as price bouncing off your customized FVG boxes, EMA trend crosses, and volume divergences (CVD).

- Zero-Lag, Self-Cleaning Smart Boxes: Your Fair Value Gaps (FVGs) are now filtered by true volume and size, meaning the indicator only plots the strongest institutional levels. To keep your trading platform fast and your charts completely uncluttered, these boxes are designed to automatically delete themselves the moment the price fills 50% of the gap.

- How to Use the Non-Repainting Momentum Panel: The new panel scans 9 different timeframes to give you an overall percentage score of the market's direction. It is built to never "repaint" or trick you while a candle is moving. The best way to use it is to look for a high score (like 80% or more) in one direction, and use that as your final green light to pull the trigger when price hits your other confluences.

릴리즈 노트

The latest addition to Sniper Trader Pro V8.2 is the Market Structure (CHoCH / BOS) module.

This Smart Money Concepts (SMC) tool automatically maps the market's structure using pivot highs and lows to detect trend shifts. It plots Change of Character (CHoCH) and Break of Structure (BOS) lines directly on your chart, using strict anti-repaint logic so signals are only locked in after a candle fully closes. It also includes full visual customization for line styles, thickness, and text sizes.

릴리즈 노트

🚀 New Features: Liquidity Tracking
Automated Equal Highs & Lows (EQH / EQL): The indicator now automatically detects areas of resting liquidity where price has formed double (or multiple) tops and bottoms.

ATR-Based Tolerance: Instead of relying on exact, to-the-tick matches, the engine uses a dynamic Average True Range (ATR) multiplier (default set to 0.3). This allows the script to mathematically identify realistic liquidity pools even if the wicks are slightly uneven.

🎨 Refined Defaults & Visuals
Cleaner SMC Structure: CHoCH and BOS lines have been updated to a subtle, dotted style (width 1) with smaller text labels. Bullish breaks are now Aqua, and Bearish breaks are Red, minimizing chart clutter while keeping signals clear.

Distinct Liquidity Colors: To separate liquidity from structure, EQH lines plot in Aqua, while EQL lines plot in Orange.

Tighter Margins: Both the Fair Value Gap (FVG) and Opening Range Breakout (ORB) line projection margins have been shortened to 3 bars, keeping the visual focus strictly on current price action.

Higher FVG Sensitivity: The default FVG ATR filter has been adjusted down to 0.3, allowing for more responsive gap detection.

🛠 Under-the-Hood Improvements
Vectorized Processing: The new liquidity module runs on the same O(1) time complexity as the rest of the indicator. By utilizing state-retained variables (var) for the liquidity pools, the engine draws EQH/EQL zones instantly without running heavy historical loops.

Zero Repaint Guarantee: Like the CHoCH and BOS signals, the new EQH/EQL zones are strictly anchored to the close[1] historical state. The indicator will never draw a liquidity line mid-candle and erase it later.

릴리즈 노트

The main change is that we have removed the safety lock from the MTF panel.

Previously, the scanner only evaluated the last closed session to give you a confirmed and stable bias. Now, it reads live price action on the currently forming candle, meaning the panel will react and update in absolute real-time to every heartbeat and fluctuation of the intraday market.

릴리즈 노트

Defaulted Fast Ema to 14 and Trend Ema to 50.

릴리즈 노트

Here is the updated summary including the new VWAP session module implementation:

50% Line (Dimmed): Geometrically marks the Consequent Encroachment. It serves as an exact entry level and validation point; if the price respects this midpoint, the probability of a reversal is extremely high.

Volume Ratio ("Vol: X.Xx"): Mathematically quantifies the institutional strength of the candle that created the gap. It serves to classify the setup's quality: high values (>1.5x) confirm a real capital injection, while low values warn of a lack of liquidity (slippage).

Typography Adjustment (size.small): Increases the scale of the text anchored to the box. It serves to optimize the trader's visual ergonomics, allowing for an instant reading of the data without generating visual clutter on the price chart.

Bi-Sessional Custom VWAP: Automatically resets at 9:30 AM and 6:00 PM EST instead of tracking continuously. It serves to isolate price action, providing a separate and clean algorithmic benchmark for both the regular market session and the evening/overnight session.

릴리즈 노트

Sniper Trader Pro V8.6 SMC Edition - Architecture & Parameter Upgrades
50% FVG Midpoint Line: Added a dimmed, dotted line inside Fair Value Gaps to visually pinpoint the "Consequent Encroachment" level for precise institutional entries.

Volume Strength Labels: FVG boxes now display a dynamic multiplier (e.g., "Vol: 2.5x") based on a 20-period SMA. This instantly quantifies institutional momentum and filters out low-liquidity gaps.

Bi-Sessional VWAP: Upgraded to a custom VWAP that automatically resets at 9:30 AM and 6:00 PM EST, isolating regular market hours from the overnight session.

Real-Time Proportional CVD Engine: Replaced the legacy delta with a proportional intrabar calculation that resets daily. It now highlights candle borders in real-time for instant divergence alerts, while drawing solid lines for macro structural pivots.

Optimized Default Parameters (For Scalping & Readability):

Text Size: Increased FVG volume labels to Small to improve visual ergonomics without cluttering the chart.

Pivot Period (ms_prd = 3): Reduced from 5 to 3 for faster, more agile detection of Market Structure shifts (CHoCH/BOS) and CVD divergences.

Liquidity Tolerance (eq_tol = 0.5): Increased to 0.5 ATR to capture broader and more realistic Equal Highs (EQH) and Equal Lows (EQL) liquidity pools.

릴리즈 노트

Sniper Trader Pro V8.7 SMC Edition - Update Changelog
🚀 Performance & Memory Optimization

Extreme FVG Rendering Optimization: Completely overhauled the Fair Value Gap (FVG) mitigation loop. Replaced computationally heavy, continuous API getter queries with a static O(1) memory cache (var array). This exponentially reduces the intra-bar CPU load, prevents memory leaks, and drastically increases the rendering FPS on lower-end devices.

Vectorized Real-Time Execution: Shifted mathematical calculations for structural midpoints to trigger only once upon creation, bypassing the need for redundant recalculations on every incoming price tick.

🛡️ Core Logic & Stability (Zero Repaint Guarantee)

Absolute Lookahead Bias Prevention: Hardened the Multi-Timeframe (MTF) Momentum Panel. All higher-timeframe data requests (request.security) are now strictly locked with lookahead = barmerge.lookahead_off. This guarantees that the indicator relies exclusively on closed data, ensuring 100% historical accuracy and zero repainting.

Syntax & Engine Compliance: Resolved a critical CE10005 compilation error by aligning the code structure strictly with Pine Script v6 indentation and topology standards.

🎨 UI/UX & Quality of Life Enhancements

Dynamic CVD Label Resizing: The Delta Divergence (CVD) labels are no longer rigidly locked to a small font. Introduced a new UI drop-down setting allowing users to dynamically scale the divergence text size (Tiny to Huge), ensuring perfect readability across all monitor sizes and resolutions.

Automated Chart Anchoring: Injected a strict rigid scaling parameter (scale = scale.right) directly into the indicator's core. This automatically forces all drawings, FVG boxes, and Opening Range Breakout (ORB) lines to synchronize with the right-hand price axis. This eliminates visual distortion and removes the need for users to manually select "Pin to Right Scale."

릴리즈 노트

Changelog: Sniper Trader Pro V8.8 (SMC Edition) - Order Flow & Session Update
✨ New Features & Core Upgrades

Smart Session Flush (Overnight FVG Auto-Clean)

Added: A new toggle in the settings (Auto-Delete OVN FVGs at NY Open) to automatically clear low-liquidity Fair Value Gaps generated during the overnight and Asian sessions.

Functionality: Triggers exactly at the New York Open (09:30 AM EST) to remove structural noise, ensuring the chart is clean for the main session's institutional volume.

Memory Retention: High-volume FVGs created during previous RTH (Regular Trading Hours) sessions are securely retained in memory and will not be deleted, preserving critical historical liquidity zones.

Intrabar Delta (Order Flow) Validation for FVGs

Added: A new setting (Filter by Favorable Delta) that integrates CVD (Cumulative Volume Delta) logic directly into the FVG validation process.

Functionality: The displacement candle creating the FVG is now scanned internally. Bullish FVGs require a net-positive delta (aggressive market buying), and bearish FVGs require a net-negative delta (aggressive market selling).

Benefit: Drastically reduces false FVG traps by filtering out high-volume candles that were actually driven by absorption or passive limit orders.

📈 UI & Visual Enhancements

Delta Confirmation Symbol

Added: A dynamic 'Δ' symbol appended to the FVG volume strength label (e.g., Vol: 2.5x Δ).

Functionality: Provides immediate visual confirmation directly on the chart that the plotted FVG has successfully passed the strict Order Flow/Delta filter.

릴리즈 노트

Sniper Trader Pro - Changelog v8.9 SMC Edition
Overview:
Version 8.9 brings a deep restructuring to the indicator's time synchronization. The internal architecture has been completely overhauled to make it a truly hybrid tool, capable of operating flawlessly in both traditional markets (Wall Street) and 24/7 continuous markets (Crypto, Forex).

✨ New Features
Hybrid Crypto Mode (Group 0): Added a new master control panel at the top of the settings. By enabling Crypto Mode, the indicator bypasses the traditional open/close market session and switches to a continuous cycle with a customizable daily reset time (defaults to 20:00).

Native Timezone Selector: Integrated a built-in dropdown menu featuring major global financial timezones (America/New_York, Europe/London, UTC, etc.). This eliminates the need to manually type timezone codes.

Dual & Dynamic ORB: The Opening Range Breakout (ORB) now operates with two separate engines. Separate timeframes have been established for NY ORB (e.g., 09:30-09:45) and Crypto ORB (e.g., 20:00-20:30). The script automatically detects your active mode and draws the corresponding opening range.

릴리즈 노트

CHANGELOG - Sniper Trader Pro v9.0 SMC Edition

Dynamic Moving Average Engine: Replaced the strictly EMA-based moving average module with a dynamic, multi-type selector utilizing user-defined types (enum MAType). Users can now toggle between EMA, SMA, and HMA for their Fast (14), Trend (50), and Support (200) lines.

Unconditional MA Calculations: Implemented a new get_ma() helper method to compute all moving average formulas unconditionally. This architectural upgrade ensures the historical data series remains consistent on every bar, preventing na values or repainting issues when a user switches the MA type in the settings.

UI & Character Encoding Patches: Fixed broken unicode/character encoding issues from v8.9 that resulted in corrupted text rendering. Cleanly restored the intended visual emojis for Bullish/Bearish CVD Divergence labels (🐂 / 🐻) and the Favorable Delta Volume FVG labels (🚀).

릴리즈 노트

Fixed 24h Orb for Crypto Mode

릴리즈 노트

// ==========================================
// CHANGELOG: Sniper Trader V9.3 Pro SMC Edition
// ==========================================
// * Updated NY ORB timeframe default to 09:30 - 10:00.
// * Set Afternoon ORB timeframe default to 18:00 - 18:15.
// * Adjusted EQH/EQL ATR tolerance multiplier to 0.15.
// * Switched default Moving Average calculation type entirely to SMA.
// * Configured Moving Average default periods to 14 (Fast), 70 (Trend), and 210 (Support).
// * Implemented strict boolean typecasting and explicit state initializations for all session toggles.

릴리즈 노트

Changelog
v9.4 - MTF ORB Synchronization Update
Date: July 2026

[Bug Fix] Multi-Timeframe Session Calculation (ORB):

Completely restructured the calculation engine for the Triple Hybrid ORB (Crypto, NY, and PM).

Issue resolved: The indicator previously generated distorted ranges, printed false levels, or disappeared when switching the chart to higher timeframes (e.g., 15m, 30m, 1H). This was caused by data contamination from candles that exceeded the duration of the operational windows.

Solution implemented: Integrated a nested function using request.security(). The algorithm now internally "travels" to the 1-minute timeframe to extract the exact High, Low, and Timestamp of the session window, projecting them with pinpoint accuracy onto any higher timeframe chart.

[Optimization] State & Array Management:

Cleaned up global state variable declarations and optimized the memory handling of FVG box arrays to prevent repainting outside of active trading sessions.

Mini-Guide: Sniper Trader Pro SMC Edition
To execute high-probability setups, the goal is to align with the macro direction, wait for the price to reach a point of interest (POI), and use an order flow confirmation to pull the trigger.

Step 1: Define the Direction (Context)
Always consult these two elements before looking for entries:

MTF Momentum Panel: Check the probability percentage in the chosen corner. If the panel shows a strong directional confluence (e.g., >70%), strictly prioritize trades in that direction.

SMA & VWAP Alignment: Price should be trading above the SMA 210 and VWAP to confirm buyer control (or below for sellers). The SMA 14 crossing the SMA 70 will provide the exact timing for the short-term momentum shift.

Step 2: Identify the Point of Interest (POI)
Once the direction is clear, you need a high-probability reaction zone.

ORB Break and Retest: The extremes of the ORB (NY ORB-H or NY ORB-L) act as magnetic support/resistance levels. Wait for the price to break the initial range and pull back to retest the line.

Filtered FVGs: The indicator only highlights Fair Value Gaps backed by unusual volume and a favorable delta. A pullback into one of these validated FVG boxes is an excellent reload zone.

Step 3: The Entry Trigger (Confirmation)
Never enter a trade just because the price touched a zone. Wait for internal structure tools to confirm institutional money is stepping in:

CHoCH (Change of Character): When the price taps your FVG or ORB level, wait for the indicator to print the dotted CHoCH line in your direction. This confirms the micro-structure has shifted.

CVD Divergence (Delta): This is the ultimate confirmation. If the price makes a new low into support, but a bullish "Div" label appears, it means selling volume is drying up (absorption). This is the exact moment to enter.

Step 4: Trade Management (TP and SL)
Stop Loss (SL): Place it structurally below the recent Pivot Low (CHoCH line) or just outside the validated FVG box. If the price invalidates that box, the trade premise is void.

Take Profit (TP): Use the liquidity markers EQH (Equal Highs) or EQL (Equal Lows) as primary exit targets, as the price will naturally seek to neutralize those zones. Alternatively, target the opposite end of the ORB.

릴리즈 노트

# 🚀 Sniper Trader V10 Pro SMC Edition - Official Release Notes

The V10 update brings a complete overhaul to the core calculation engines of the indicator. We have removed the lag, fixed multi-timeframe discrepancies, and fine-tuned the default settings to give you a definitive edge in fast-moving markets.

### 🛠️ Part 1: Changelog & Technical Upgrades

* **Flawless Multi-Timeframe VWAP Anchoring:** The VWAP drift issue has been completely resolved. The VWAP now anchors perfectly to the regular trading hours open (e.g., 09:30 EST) and maintains the exact same price level whether you are executing on a 1-minute chart or analyzing the 1-hour macro structure.

* **Real-Time CVD Divergence Engine:** The "infinite delta" accumulation bug has been fixed; Delta now properly resets every session. More importantly, the confirmation lag has been removed. Divergence shapes and dynamic candle colors now print in **real-time** the exact moment a liquidity sweep occurs.

* **Unrestricted Divergence Coloring:** Dynamic candle coloring now accurately highlights all four divergence scenarios. Candles will paint dynamically based on buying or selling absorption, regardless of whether the final candle body closes bullish or bearish.

* **Optimized Institutional EMAs:** Default moving averages have been calibrated to the ultimate intraday standards for momentum and trend tracking: **9 EMA (Fast)**, **70 EMA (Trend)**, and **210 EMA (Support)**.

* **Enhanced Customization:** Added a new UI input allowing users to fully customize the color of the Neutral VWAP line to match their preferred charting theme.

---

### 🎯 Part 2: The "Sniper Edge" Trading Strategy

When day trading heavy-volume futures like the NQ or ES, hesitation or a lack of directional bias will get you chopped up. The V10 Pro is designed to eliminate the guesswork by stacking institutional confluences.

Here is the blueprint for high-probability executions:

**Step 1: Establish Your Bias (The Drifting VWAP)**
Never fight the institutional momentum. Let the Drifting VWAP dictate your daily direction:

* **White Crosses (Bullish Drift):** Buyers have absolute control. *Only look for long setups.*
* **Red Crosses (Bearish Drift):** Sellers are dominating the tape. *Only look for short setups.*
* **Solid Line (Neutral):** The market is chopping or transitioning. *Protect your capital and sit on your hands.*

**Step 2: Wait for the Value Trap (The Pullback)**
Amateurs buy the absolute highs and short the absolute lows. Snipers wait for the retracement. Once your bias is locked in (e.g., White Crosses for longs), let the price pull back into a high-value discount area, such as the 9 EMA or the VWAP band itself.

**Step 3: The Sniper Trigger (Confluence Execution)**
Do not enter blindly just because the price hit a moving average. Wait for the ultimate trigger confluence at your value area:

* **The Structure:** Look for an **Auto-Filtered FVG** to light up. The V10 automatically filters these gaps, only showing you the ones backed by high volume and favorable delta.

* **The Execution:** As the price taps into that FVG, watch for a **Real-Time CVD Divergence Signal**. If the price sweeps a recent low into your FVG, but the CVD prints a Bullish Divergence shape (buying absorption), that is your highest probability entry. Execute the trade and place a tight stop loss just outside the FVG box.

릴리즈 노트

Code Correction and Optimization Patch

릴리즈 노트

Bugs fixed from the last update. NY session VWAP anchoring was broken. FVG marging corrected and Divergence menu updated.

릴리즈 노트

Optimizing code for efficiency.

릴리즈 노트

### 🚀 Major Update: Sniper Trader V10.5 Pro SMC / CVD Edition

We are introducing the definitive version that merges the best of two worlds into a single script: the original **Sniper Trader Pro** and the analytical power of the **Sniper CVD Pro Zones**.

This update was designed to clear the noise from your chart and focus on what truly moves the markets: liquidity, order flow, and pure price action.

#### 📋 Changelog (V10.5 vs V10.2)
* **New Automated Breakout Strategy:** Integration of visual breakout signals in the direction of the trend, using the 200 SMA as the main filter.
* **Dynamic Take Profit (TP) Zones:** Upon confirming a breakout, the indicator now automatically projects 3 take profit levels based on ATR multipliers (x1, x2, and x3) and includes an auto-cleanup feature for unresolved lines to prevent chart clutter.
* **CVD Sensitivity & Styling Adjustments:** Divergence detection has been refined for higher probability setups by adjusting the lookback periods (Left Bars set to 10 and Right Bars set to 1). Meanwhile, the minimum wait bars to validate a bounce is now set to 3 for faster, more reactive entries once a solid zone is formed. Additionally, the default absorption zone border style has been changed to 'Dotted' for a cleaner aesthetic.
* **Drifting VWAP Optimization:** The default Anchor is now set to the regular trading session (NY 09:30), and deviation bands are hidden by default for a more minimalist look.
* **Visual Cleanup:** Market Structure (CHoCH/BOS), Advanced FVGs, and Liquidity (EQH/EQL) features are now turned off by default. (They remain available in the settings for those who study and trade these concepts independently).

---

#### 🧠 The New Concept: How to Trade Without Overthinking

The core of this new version relies on **CVD Bouncing Zones**. Simply put, the indicator reads the volume delta and looks for key **battle zones**. When it clearly identifies who won the liquidity battle (Bulls or Bears), it draws the zone on the chart.

**The correct way to trade it is by being patient:**
1. Let the indicator draw the zone.
2. Wait for the price to return and test that level in the future.
3. Take the trade in the direction of the bounce once the trigger is confirmed.

To make this visually instinctive, we have coded three clear labels:
* **B (Bounce):** Indicates a successful bounce off a CVD absorption zone.
* **BU (Breakout UP):** Indicates the price has just broken through a CVD zone upward with momentum.
* **BD (Breakout DOWN):** Indicates the price has broken through a CVD zone downward with momentum.

**🎯 Exit Management (Take Profit):**
Immediately after a BU or BD signal, the indicator plots 3 Take Profit lines on your chart. Based on statistics and mathematical probability, **the T1 (ATR x1) and T2 (ATR x2) levels are the most likely targets**. Only aim for T3 (ATR x3) if you have confirmation of exceptional momentum.

---

#### ⏱️ Timeframes and the Magic of the Drifting VWAP

From experience analyzing volume profiles and price action, the timeframes where you will find the most effective and precise signals are the **3-minute, 5-minute, and 15-minute** charts.

**Your best filtering tool will be the Drifting VWAP.** Depending on its visual state, it will tell you exactly what to expect when the price approaches it (VWAP bounces are lethal on the 3m and 5m):

* **Positive Crosses (White):** This means that in the last hour, the price has risen more than +0.1%. We are in a confirmed uptrend. If the price pulls back and touches the VWAP, **the bounce will most likely be bullish**.
* **Negative Crosses (Red):** Indicates a strong downtrend. Look to take advantage of VWAP tests to enter in favor of the bears.
* **Solid Yellow Line (Neutral):** Indicates consolidation or indecision. When the VWAP is yellow, the price can chop through it from side to side or bounce erratically. Avoid trading heavy bounces in this condition.

*Note: I will not be covering Fair Value Gaps (FVG) or Market Structure (BOS/CHoCH) concepts in this guide, as they are separate topics that require independent study. If you have already mastered them, simply enable them in the settings panel for extra confluence.*

릴리즈 노트

Indicator name updated.

릴리즈 노트

#Changelog:

*Added Cumulative Delta Volume to the CVD boxes

For Better signals after rejections use Min Bar before bounce + (2)

릴리즈 노트

#Minor cosmetics updates.

릴리즈 노트

#Changelog:

Fixed take profit line overlaps from previous Breakouts.

릴리즈 노트

Sniper Trader V11.0 Pro Institutional - Changelog

-Welcome to V11.0! This update transforms the indicator from a standard divergence tool into a complete institutional execution engine, featuring advanced volume reading and automated trade management.

-Wick-Weighted CVD (VSA): We’ve replaced binary candle delta with a smarter algorithm that reads real intra-bar wick absorption. No more false volume signals on long-wick dojis.

-A+ Institutional Confluence: New UI tags (B+, BU+, BD+) now highlight high-probability setups where CVD divergence perfectly aligns with Market Structure (CHoCH/BOS) or Liquidity Sweeps (EQH/EQL).

-Strict Sweep Rejection: To prevent getting trapped in strong momentum breakouts, the engine now requires a minimum 20% wick rejection when sweeping a pivot to validate a divergence.

-True Zone Delta Accuracy: The accumulated Delta ($\Delta$) inside absorption boxes now only calculates when the price is physically interacting with the zone, giving you an exact read of trapped volume.

-Automated Risk Management & Auto Break-Even: Rebound entries ("B") now instantly generate visual TP1, TP2, TP3, and SL lines. Plus, a new Auto Break-Even engine instantly protects your entry once TP1 is hit.

-ATR-Adaptive Drifting VWAP: VWAP trend sensitivity now dynamically scales with real-time volatility (ATR) instead of a fixed percentage, keeping you synced with high-volatility assets like NQ, ES, and Crypto.

-Pro Alerts & Stable MTF Panel: The MTF Momentum Panel is now stabilized with an EMA(9) filter to prevent mid-candle flickering. We also introduced fully structured JSON Webhook Alerts (including exact TP/SL prices and signal grades) for seamless auto-trading integration.

18시간 전

릴리즈 노트

# Release Notes: Sniper Trader V12.0 Pro SMC/CVD Institutional

### Major Confluence & Order Flow Upgrades

* **Institutional Confluence Matrix (A+ Scoring Engine)**
Replaced the binary trigger with a 5-pillar confluence model: Market Structure (CHoCH/BOS), Multi-Timeframe Momentum (≥ 65%), Liquidity Sweeps, Valuation (FVG & Drifting VWAP Bands), and Intrabar Volume Delta. Top-tier setups are now clearly labeled as **B+**, **BU+**, and **BD+**.

* **Passive Absorption Divergence (Limit Walls)**
Added detection for passive institutional absorption. Identifies when Cumulative Volume Delta (CVD) aggressively pushes to new highs/lows while price is halted and absorbed by limit orders at key pivots.

* **Super-POI Confluence (CVD + FVG Alignment)**
Background spatial tracking monitors when a CVD absorption zone directly overlaps an active Fair Value Gap (FVG), automatically tagging high-probability institutional POIs with **[FVG]**.

* **Opening Range Breakout (ORB) Engine**
CVD zones now cross-reference Opening Range extremes in real time, pinpointing false-breakout sweeps (Judas Swings) and breakout retests marked with **[ORB]**.

* **Adaptive Drifting VWAP & Deviation Bands**
Mean-reversion bounces now factor in ±2σ statistical bands, while breakout setups (BU/BD) dynamically align with real-time ATR drifting VWAP trends.

---

### Bug Fixes & System Optimizations

* **CVD Session Reset Synchronization**
Pivot references and delta now flush synchronously upon daily and crypto resets (`global_reset`), preventing opening-bell false divergences.

* **Single-Use Liquidity Pools**
Equal Highs (EQH) and Equal Lows (EQL) invalidate immediately upon being swept, preventing duplicate tags on exhausted liquidity levels.

* **Zone Delta Defense Filter**
Added execution protection to suppress bounce signals when internal order flow inside the zone is heavily dominated by opposing volume.

* **Dynamic Chart Labels & Streamlined UI**
Resolved Pine Script v6 compiler warnings and improved input tab alignment. Added an optional toggle (`show_score_labels`) to display exact confluence ratings on entry labels (e.g., `B+ [4]`).

TRDG84

면책사항

해당 정보와 게시물은 금융, 투자, 트레이딩 또는 기타 유형의 조언이나 권장 사항으로 간주되지 않으며, 트레이딩뷰에서 제공하거나 보증하는 것이 아닙니다. 자세한 내용은 이용 약관을 참조하세요.

TRDG84