OPEN-SOURCE SCRIPT
Q-Trend w/ SL+Trailing Stop
Q Trend Strategy
Simple Q Trend Strategy mixed with a fixed SL and Trailing drawdown. Also using VIDYA Volumatic Indicator and Two Pole Oscillator for entry confirmation.
Using The Indicator:
-Some arrows and exit positions will pop up on the chart. You ONLY need to focus on the BLUE and RED arrows.
-BLUE arrow is for LONG and RED arrow is for SHORT. Simple!
- You can use it on most time frames but 15M,30M,1H timeframes work best. Try and get your entry as close as you can to the arrows and exit on the reversal.
- If the delta volume is BELOW 20% you should just stay out of the market. Above 20% the trade has higher probability of being profitable.
Feedback is appreciated. Enjoy
Pinescript Code:
//version=5
strategy("Q-Trend Strategy with SL and Trailing Stop + Date Range", overlay = true, default_qty_type = strategy.percent_of_equity, default_qty_value = 100)
// ─────────────────────────────────────────────────────────────────────────────
// Date Range Filter
useDateFilter = input.bool(true, "Use Date Range Filter", group="Date Range")
startTime = input.time(timestamp("2024-01-01T00:00:00"), "Start Date", group="Date Range")
endTime = input.time(timestamp("2026-12-31T23:59:59"), "End Date", group="Date Range")
closeAfterEnd = input.bool(true, "Close positions after End Date?", group="Date Range",
tooltip="If enabled, any open position will be closed on/after the End Date.")
// Allow entries only inside the date window
inDateRange = not useDateFilter or (time >= startTime and time <= endTime)
// Inputs
src = input(close, "Source", group = "Main settings")
p = input.int(200, "Trend period", group = "Main settings", minval = 1)
atr_p = input.int(14, "ATR Period", group = "Main settings", minval = 1)
mult = input.float(1.0, "ATR Multiplier", step = 0.1, group = "Main settings")
mode = input.string("Type A", "Signal mode", options = ["Type A", "Type B"], group = "Mode")
use_ema_smoother = input.string("No", "Smooth source with EMA?", options = ["Yes", "No"], group = "Source")
src_ema_period = input.int(3, "EMA Smoother period", group = "Source")
// Risk Management Inputs
atr_mult_stop = input.float(2.0, "Stop Loss (ATR)", group="Risk Management")
atr_mult_trail = input.float(1.0, "Trailing Stop (ATR)", group="Risk Management")
// Source calculation
src := use_ema_smoother == "Yes" ? ta.ema(src, src_ema_period) : src
// Trend line and ATR
h = ta.highest(src, p)
l = ta.lowest(src, p)
d = h - l
m = (h + l) / 2
m := bar_index > p ? m[1] : m
atr = ta.atr(atr_p)[1]
epsilon = mult * atr
change_up = (mode == "Type B" ? ta.cross(src, m + epsilon) : ta.crossover(src, m + epsilon)) or src > m + epsilon
change_down = (mode == "Type B" ? ta.cross(src, m - epsilon) : ta.crossunder(src, m - epsilon)) or src < m - epsilon
sb = open < l + d / 8 and open >= l
ss = open > h - d / 8 and open <= h
strong_buy = sb or sb[1] or sb[2] or sb[3] or sb[4]
strong_sell = ss or ss[1] or ss[2] or ss[3] or ss[4]
m := (change_up or change_down) and m != m[1] ? m : change_up ? m + epsilon : change_down ? m - epsilon : nz(m[1], m)
var string ls = ""
ls := change_up ? "B" : change_down ? "S" : ls[1]
// === STRATEGY LOGIC ===
// Entries restricted by date range
longCondition = change_up and ls[1] != "B" and inDateRange
shortCondition = change_down and ls[1] != "S" and inDateRange
if (longCondition)
strategy.entry("Long", strategy.long)
strategy.close("Short")
strategy.exit("Exit Long", from_entry="Long", stop=atr * atr_mult_stop, trail_points=atr * atr_mult_trail, trail_offset=atr * atr_mult_trail)
if (shortCondition)
strategy.entry("Short", strategy.short)
strategy.close("Long")
strategy.exit("Exit Short", from_entry="Short", stop=atr * atr_mult_stop, trail_points=atr * atr_mult_trail, trail_offset=atr * atr_mult_trail)
// Optionally flatten after end date
if useDateFilter and closeAfterEnd and time >= endTime and strategy.position_size != 0
strategy.close_all(comment="End Date Close")
plot(m, title="Trend Line", color=ls == "B" ? color.green : color.red, linewidth=2)
Simple Q Trend Strategy mixed with a fixed SL and Trailing drawdown. Also using VIDYA Volumatic Indicator and Two Pole Oscillator for entry confirmation.
Using The Indicator:
-Some arrows and exit positions will pop up on the chart. You ONLY need to focus on the BLUE and RED arrows.
-BLUE arrow is for LONG and RED arrow is for SHORT. Simple!
- You can use it on most time frames but 15M,30M,1H timeframes work best. Try and get your entry as close as you can to the arrows and exit on the reversal.
- If the delta volume is BELOW 20% you should just stay out of the market. Above 20% the trade has higher probability of being profitable.
Feedback is appreciated. Enjoy
Pinescript Code:
//version=5
strategy("Q-Trend Strategy with SL and Trailing Stop + Date Range", overlay = true, default_qty_type = strategy.percent_of_equity, default_qty_value = 100)
// ─────────────────────────────────────────────────────────────────────────────
// Date Range Filter
useDateFilter = input.bool(true, "Use Date Range Filter", group="Date Range")
startTime = input.time(timestamp("2024-01-01T00:00:00"), "Start Date", group="Date Range")
endTime = input.time(timestamp("2026-12-31T23:59:59"), "End Date", group="Date Range")
closeAfterEnd = input.bool(true, "Close positions after End Date?", group="Date Range",
tooltip="If enabled, any open position will be closed on/after the End Date.")
// Allow entries only inside the date window
inDateRange = not useDateFilter or (time >= startTime and time <= endTime)
// Inputs
src = input(close, "Source", group = "Main settings")
p = input.int(200, "Trend period", group = "Main settings", minval = 1)
atr_p = input.int(14, "ATR Period", group = "Main settings", minval = 1)
mult = input.float(1.0, "ATR Multiplier", step = 0.1, group = "Main settings")
mode = input.string("Type A", "Signal mode", options = ["Type A", "Type B"], group = "Mode")
use_ema_smoother = input.string("No", "Smooth source with EMA?", options = ["Yes", "No"], group = "Source")
src_ema_period = input.int(3, "EMA Smoother period", group = "Source")
// Risk Management Inputs
atr_mult_stop = input.float(2.0, "Stop Loss (ATR)", group="Risk Management")
atr_mult_trail = input.float(1.0, "Trailing Stop (ATR)", group="Risk Management")
// Source calculation
src := use_ema_smoother == "Yes" ? ta.ema(src, src_ema_period) : src
// Trend line and ATR
h = ta.highest(src, p)
l = ta.lowest(src, p)
d = h - l
m = (h + l) / 2
m := bar_index > p ? m[1] : m
atr = ta.atr(atr_p)[1]
epsilon = mult * atr
change_up = (mode == "Type B" ? ta.cross(src, m + epsilon) : ta.crossover(src, m + epsilon)) or src > m + epsilon
change_down = (mode == "Type B" ? ta.cross(src, m - epsilon) : ta.crossunder(src, m - epsilon)) or src < m - epsilon
sb = open < l + d / 8 and open >= l
ss = open > h - d / 8 and open <= h
strong_buy = sb or sb[1] or sb[2] or sb[3] or sb[4]
strong_sell = ss or ss[1] or ss[2] or ss[3] or ss[4]
m := (change_up or change_down) and m != m[1] ? m : change_up ? m + epsilon : change_down ? m - epsilon : nz(m[1], m)
var string ls = ""
ls := change_up ? "B" : change_down ? "S" : ls[1]
// === STRATEGY LOGIC ===
// Entries restricted by date range
longCondition = change_up and ls[1] != "B" and inDateRange
shortCondition = change_down and ls[1] != "S" and inDateRange
if (longCondition)
strategy.entry("Long", strategy.long)
strategy.close("Short")
strategy.exit("Exit Long", from_entry="Long", stop=atr * atr_mult_stop, trail_points=atr * atr_mult_trail, trail_offset=atr * atr_mult_trail)
if (shortCondition)
strategy.entry("Short", strategy.short)
strategy.close("Long")
strategy.exit("Exit Short", from_entry="Short", stop=atr * atr_mult_stop, trail_points=atr * atr_mult_trail, trail_offset=atr * atr_mult_trail)
// Optionally flatten after end date
if useDateFilter and closeAfterEnd and time >= endTime and strategy.position_size != 0
strategy.close_all(comment="End Date Close")
plot(m, title="Trend Line", color=ls == "B" ? color.green : color.red, linewidth=2)
오픈 소스 스크립트
트레이딩뷰의 진정한 정신에 따라, 이 스크립트의 작성자는 이를 오픈소스로 공개하여 트레이더들이 기능을 검토하고 검증할 수 있도록 했습니다. 작성자에게 찬사를 보냅니다! 이 코드는 무료로 사용할 수 있지만, 코드를 재게시하는 경우 하우스 룰이 적용된다는 점을 기억하세요.
면책사항
해당 정보와 게시물은 금융, 투자, 트레이딩 또는 기타 유형의 조언이나 권장 사항으로 간주되지 않으며, 트레이딩뷰에서 제공하거나 보증하는 것이 아닙니다. 자세한 내용은 이용 약관을 참조하세요.
오픈 소스 스크립트
트레이딩뷰의 진정한 정신에 따라, 이 스크립트의 작성자는 이를 오픈소스로 공개하여 트레이더들이 기능을 검토하고 검증할 수 있도록 했습니다. 작성자에게 찬사를 보냅니다! 이 코드는 무료로 사용할 수 있지만, 코드를 재게시하는 경우 하우스 룰이 적용된다는 점을 기억하세요.
면책사항
해당 정보와 게시물은 금융, 투자, 트레이딩 또는 기타 유형의 조언이나 권장 사항으로 간주되지 않으며, 트레이딩뷰에서 제공하거나 보증하는 것이 아닙니다. 자세한 내용은 이용 약관을 참조하세요.