Tidal Divergence [JOAT]Tidal Divergence
Tidal Divergence is a composite divergence detector that lives in a sub-pane and projects high-conviction divergence visuals onto the price chart. The composite blends three volume-based oscillators — Money Flow Index, percentile-ranked Cumulative Volume Delta, and z-scored OBV rate-of-change — into a single normalized stream. Both regular and hidden divergences are detected. Persistent zones are drawn at divergence pivots, and zone mitigation is tracked with body / wick / rejection modes.
What makes it different
Single-oscillator divergence indicators give a single perspective. Tidal Divergence's composite triangulates three independent volume-derived oscillators so a divergence in the composite is supported by three volume readings instead of one.
Hidden divergences (continuation pattern: price higher low plus oscillator lower low for bull) are detected separately from regular divergences (reversal pattern), with distinct line styles on the price chart.
Each detected divergence creates a persistent demand or supply zone with optional FVG-confluence gating, dynamic alpha-by-age (zones fade as they age), and explicit mitigation logic (body / wick / two-close rejection variants).
A composite percentile envelope (5th to 95th percentile of the last 200 bars) is drawn behind the oscillator so absolute readings are easy to interpret in context.
How it works
MFI(14), daily-reset CVD then ta.percentrank(cvd, 100), OBV ROC z-score over a 20-bar mean / stdev. Three legs, each normalized to roughly the same scale.
Composite equals 0.40 times the normalized MFI plus 0.35 times the normalized CVD percentile plus 0.25 times the clamped OBV ROC z. Hull-smoothed and scaled to centi-percent.
Pivots are detected on the composite stream. A regular bull divergence requires a price lower low paired with a composite higher low within a 5-to-60-bar window. Hidden bull requires a price higher low plus composite lower low. Bear variants invert the conditions.
At each divergence pivot, two horizontal lines are drawn (edge equals lowest wick / highest wick. base equals lowest body / highest body), with a linefill between them, on the price chart via force_overlay=true.
Zone mitigation: body mode (close beyond edge) or wick mode (high/low beyond edge), optionally with two-close rejection requirement.
Optional FVG confluence requires a recent 3-bar Fair Value Gap before firing the divergence-final alert.
Reading the chart
In-pane : composite line tinted by direction with a smoothed signal line, gradient ribbon between them, breath-modulated zero midline, plus and minus 70 overbought / oversold thresholds, and the percentile envelope as an atmospheric backdrop.
In-pane divergence markers : regular divergences as solid connector plots, hidden divergences as broken (dashed-equivalent) connectors.
Cross-pane : price-to-price divergence connector lines on the price chart (regular solid, hidden dashed). Each line has a small REG BULL DIV 4520.50 or HID BEAR DIV label at the current pivot.
Cross-pane zone fills with age-graded transparency.
Zone edge price labels follow the right edge of each active zone.
Mitigation flash labels print at the bar where a zone is broken.
A cross-pane composite tint paints a soft mint / red background when the composite is clearly above or below plus or minus 30.
Signals
Regular bullish / bearish divergence
Hidden bullish / bearish divergence (continuation)
Bull / bear zone touch
Bull / bear zone mitigated
Bull / bear stack (three or more active zones plus a fresh regular divergence)
Bull / bear streak (composite above / below zero for N consecutive bars)
All gated on barstate.isconfirmed or barstate.ishistory. No future references. No lookahead_on.
Inputs
MFI : MFI length.
Divergence : pivot lookback left / right, detect hidden divergences toggle.
Zones : zone extreme length, max zone age, mitigation mode, allow-rejection toggle.
FVG Confluence : require FVG, FVG lookback bars.
Visual : bullish / bearish colors.
Cross-pane Visuals : divergence lines, divergence labels, zone edge labels, composite tint.
Dashboard : position, size.
How traders use this
Reversal entries : a regular bull divergence with the composite leaving an oversold extreme is a high-quality long setup, especially when accompanied by an FVG below the divergence price.
Continuation entries : a hidden bull divergence during a clearly trending bull regime is a structurally supported add-on entry on a pullback.
Zone trades : after a divergence prints, treat its zone as an active demand or supply level. Reactions to the zone (touch with rejection candles) are tradable. Mitigation invalidates the level.
Composite filter : only trade with the composite in agreement (composite above 0 for longs). The cross-pane tint helps you stay aligned without checking the pane.
Limitations
Divergence detection inherently lags the actual extreme by the right-pivot window.
Composite values are smoothed and need warm-up bars before they stabilize.
Cumulative Volume Delta is a tick-volume proxy, not true level-2 order flow.
A divergence is a probability, not a guarantee. Many divergences fail before completing their implied reversal.
Compatibility
Pine Script v6 open-source indicator (pane plus cross-pane). Any symbol with volume data. Cross-pane elements use force_overlay=true. No request.security calls.
Defaults
14-bar MFI, 14-left / 5-right pivot, body mitigation, FVG confluence off by default, mint / red palette, top-right medium dashboard. Enable FVG confluence to filter for higher-quality setups.
Wskaźnik
MACD Dive [TTM Squeeze | Dual Lock %R]Disclaimer : This indicator is not financial advice and is strictly for educational and informational purposes only. The metrics and signals provided herein (including momentum crosses, trend saturation state icons, and squeeze markers) are calculated based on historical market data and do not guarantee future performance. Trading stocks and commodities involves significant risk of loss. The user assumes full responsibility for all trading decisions and should always perform their own due diligence before executing trades.
MACD Dive is a multi-state momentum and volatility context engine. By layering momentum oscillation (MACD/PPO/MACD-V) with market stalemates (volatility squeeze) and trend exhaustion (Dual %R saturation), this suite transforms a standard MACD into a multi-dimensional 'No-Go' gatekeeper. This synergy is what gives the engine its edge: it actively blocks the trader from whipsawing in sideways chop or buying into a dying trend, highlighting high-probability market turns where momentum, volatility, and trend capacity perfectly align.
Standard oscillators have a scaling problem. This script lets you choose your engine:
MACD (Classic): Measures momentum in absolute dollars. Great for visual reactivity, but a "2.0" reading means something different on a $5 stock versus a $500 stock.
PPO (Percentage): Measures momentum in percentages. Standardizes the reading across all assets, making it ideal for fixed-rule algorithmic trading.
MACD-V (Volatility Normalized): This divides the MACD by the Average True Range (ATR). It measures momentum in "Units of Volatility," mathematically adapting to market chaos so that signals remain consistent across both different assets and shifting volatility regimes (quiet markets vs chaotic markets).
This suite includes a fully optimized divergence detection engine:
Regular Divergence (Solid Lines): Identifies Trend Reversals. Price pushes to a new extreme, but momentum fails to follow, signaling exhaustion.
Hidden Divergence (Dashed Lines): Identifies Trend Continuations (Slingshots). Price pulls back, but momentum fully resets, signaling a high-probability entry in the direction of the dominant trend.
Located in your chosen corner, the HUD provides an instant visual readout with hover tooltips for active Engine Mode, %R Fatigue state, Oscillator crossover validation, and Squeeze environment. Vertical background highlights in green or red represent filter-passed momentum crossovers, like the MACD bullish cross. Use the extensive inline tooltips in the indicator's settings panel for a comprehensive breakdown of every tunable parameter.
Adaptive Time-Frames & RSI Gatekeeper
Think of this as an automated gear shifter. When looking at lower timeframes (below a user-defined boundary, e.g. 1 hour), the engine automatically scales down to tight, agile lookback periods. When viewing high timeframes, it dials up to filter out noise.
Buying a bullish MACD cross when the RSI is already at 85 increases risk of buying the top when the tank is empty. The optional RSI Safety Filter acts as a strict ceiling/floor blocker. If momentum crosses upward but the asset is mathematically overbought, the indicator suppresses the background highlight. It prevents signals on MACD crosses that have no fuel left.
VOLATILITY ENGINE: BB-KC Squeeze Radar
Building on John Carter’s TTM Squeeze by mapping the contraction of Bollinger Bands inside Keltner Channels to identify market stalemates. The implementation here color codes between a Loose Squeeze (BB inside 1.5 KC) and a hyper-compressed Tight Squeeze (BB inside 1.0 KC) to show the staged intensity of the coiled spring.
While the market coils sideways, a 20-period Linear Regression calculates the trajectory of price deviation inside the bands. The directional bias is shown by customizable markers on the zero line (default ⌃ or ⌄). This reveals hidden institutional accumulation or distribution before the trigger is pulled. To bypass "dead money" risk, the script tracks the first clean candle close or intraday pierce outside the Keltner bounds following a squeeze, catching the expansion phase exactly as it starts.
Furthermore, it accounts for the "Disappearing Mark" phenomenon. Bollinger Bands expand instantly when price moves, causing standard squeeze signals to vanish 1-3 bars before the real breakout candle. This script uses a memory state to remember recent compression, firing a "squeeze release" marker (default ❖) the exact moment price closes outside the Keltner bounds. Trade the release, not the waiting room.
Note: While MACD Dive tracks this compression mathematically on its zero-line, you can see the actual physical boundaries of the breakout by pairing it with my companion Swing Data suite . Plotting its Keltner Channel at 1.5 multiplier over your price chart allows you to visually verify the exact moment the squeeze release mark is ignited.
SATURATION ENGINE: Dual-Lock %R and Momentum Rot
This suite tracks sustained trend maturity using a fast/slow dual Williams %R setup. The conceptual pairing of a fast and slow %R to identify overbought/oversold exhaustion is credited to upslidedown's excellent Trend Exhaustion indicator . I highly recommend applying their script to your chart if you want to visually learn how the two %R lines interact.
While upslidedown’s implementation offers multiple display modes to paint visual boxes and exhaustion zones directly over price action, the focus here is on the discrete icons for trend status at the top and bottom of the MACD pane: Ignition (·), Saturation (□), and Fatigue (×). This suite adapts native ta.wpr() math assuming the trader is already familiar with Dual %R mechanics. Specific "Sprint" and "Marathon" tuning guidance is provided in the tooltips: heavily smoothing the fast line to ignore intraday noise, while lightly smoothing the macro slow line to preserve its reach into extreme zones.
It also features one major addition: the Stall. While Dual %R tracks Price Location (confirming price is structurally pinned at the highs), it doesn't track Velocity (confirming energy is sustained). To solve this, a Stoch RSI "Rot" detector runs quietly inside the saturation state. If price continues to float at the highs but internal velocity drops below a critical threshold, the script overlays a Stall marker (•). Designed as a "one-shot" early warning, it fires only on the first detection per trend saturation leg to prevent chart clutter. This differentiates a strong trend lock from a rotting lock, warning us that the move is running on fumes: giving us the exact cue to tighten stops, trim into parabolic strength, and strictly avoid adding new size.
BACKTESTER READY
Out-of-the-box compatibility with a comprehensive built-in README guide is available directly inside the settings menu. For traders who prefer a "Diamond Hands" approach, the indicator fully maps to Jason5480's TTS Framework convention, outputting strict integer states (1, -1, 2, -2) to hold full position size until the trailing macro baseline completely fractures. My personal backtester, Cosmos Signal Commander (which may be released to the public in the future), broadcasts a composite float signal capable of managing active trade positioning. It tracks entries, hard stops, and partial take-profits (swapping the trailing stop from tight to a wide "runner" buffer upon hitting extended ATR targets).
PERFORMANCE OPTIMIZATION
O(1) Memory States: Replaced lag-heavy ta.barssince() and 50-bar for loops in the Divergence engine with O(1) var state trackers.
String Caching: HUD table strings are built once in the global var scope to prevent constant memory allocation and garbage collection lag.
UI Mutation: The HUD uses table.cell_set_* to alter data dynamically, bypassing the stutter caused by destroying and redrawing tables on every tick.
Native C++ Backend: Replaced custom highest/lowest math arrays with native ta.wpr() functions for the %R engine to maximize computation speed.
Ghost State Resets: When switching the backtester logic to "Long Only" mode, the engine actively hunts and kills lingering short-memory variables so they don't inadvertently suppress valid long signals.
Wskaźnik
Wskaźnik
VWAP SD2 Reversion (Long)A patient, momentum-confirmed dip buyer that fades stretches below the session VWAP and targets a return to the mean.
The idea
Intraday price tends to oscillate around its volume-weighted average price (VWAP). When price extends a full two standard deviations below the session VWAP, it is statistically stretched and often springs back toward the average. This strategy is built to capture that snap-back, but it deliberately does not buy the dip blindly. A stretched market can keep falling, so the strategy waits for two independent momentum tools to confirm that the down-move has actually turned before it commits.
The result is a sequential, time-boxed setup: a volatility filter, a price stretch, and then two momentum confirmations that must all line up within a short window. If they do not, the setup is discarded and the strategy stays flat.
How a trade is built
Each long requires the following to occur in order, with every step happening at or after the initial dip and within the confirmation window:
Volatility filter: the lower 2-SD band must sit at least a minimum distance from VWAP (default 10 pips). This skips quiet, low-range conditions where there is little room to revert and the costs would dominate.
Step 1, the stretch: price closes below the lower 2-SD band.
Step 2, RSI confirms: RSI recovers back above its level (default 30), confirming the oversold push is fading.
Step 3, MACD confirms: the MACD line turns bullish over its signal line (or over zero, if you prefer), confirming momentum has flipped up.
Entry: a market long is taken on the bar that completes Step 3.
Why a state machine
Real momentum turns are messy. RSI and MACD often flip within a bar or two of each other, and sometimes on the very same bar. A naive rule that demands three separate single-bar crossovers in strict order misses most of these clusters. This strategy instead tracks the setup through a small state machine that:
anchors both confirmations to the first dip bar, so a momentum cross that happened before the dip cannot be borrowed to validate the trade;
accepts confirmations that arrive in either order or on the same bar, as long as both are recent and post-dip;
keeps the setup alive while price continues to hug the band, and expires it cleanly once the confirmation window passes without a trigger.
A Strict toggle is provided for those who want the original behaviour, where each step must be a fresh crossover on a later bar.
How the exit works
Because the thesis is reversion to the mean, the natural profit target is the mean itself. By default the take-profit is the live VWAP, re-evaluated every bar so it tracks the line as it moves, set a small buffer in front so the order fills on the approach rather than waiting for an exact touch. A minimum-profit floor prevents a falling VWAP from dragging the target back through the entry.
A fixed-pip take-profit mode is available as an alternative. The stop-loss is a fixed pip distance below entry in both modes. Targeting the mean rather than a fixed number of pips tends to produce variable, often larger winners, which also dilutes the impact of fixed spread costs.
Settings
Setup
SD band multiplier — standard-deviation width of the bands (default 2.0).
Min VWAP to SD2 distance — the volatility filter, in pips (default 10).
Confirmation window — how many bars each step has to confirm (default 5).
Strict cross — require a fresh crossover on a bar after the prior step.
RSI and MACD
Standard RSI length and cross level.
Standard MACD fast, slow and signal lengths, with an optional zero-line cross instead of a signal-line cross.
Risk and pips
TP at VWAP, with a front-run buffer and a minimum-profit floor, or a fixed-pip take-profit.
Stop loss in pips.
Auto pip size (mintick × 10), which resolves correctly for 5-decimal FX and 3-decimal JPY pairs, plus a manual override.
Reading the chart
Orange line: session VWAP (the reversion target).
Red and green lines: the lower and upper 2-SD bands.
Markers: 1 marks a close below the band, 2 marks the RSI confirmation, and the triangle marks the MACD confirmation and entry trigger.
Intended use
This is an intraday strategy, developed and tuned on 5-minute FX majors, with a daily VWAP anchor that resets each session. In the author's testing it has behaved most consistently on AUDUSD, and it is also designed for pairs such as EURUSD and USDJPY. As always, behaviour varies by pair, broker feed and period, so test it on your own data before relying on it.
On backtest settings: tight intraday targets are sensitive to execution costs. Before drawing conclusions from the Strategy Tester, set a commission and slippage that match your broker, and choose a position size that reflects the risk you would actually take. Results shown with unrealistic costs can look far better than anything achievable live.
This script is published for educational and research purposes only and is not financial advice or a recommendation to trade. Backtested and hypothetical results do not guarantee future performance, and trading leveraged instruments such as FX carries substantial risk of loss. You are responsible for your own testing, risk management and decisions. Strategia
Crypto Ultimate Indicator v2═══════════════════════════════════════════════
CRYPTO ULTIMATE INDICATOR (CUI)
═══════════════════════════════════════════════
A multi-layer confluence system for crypto traders. Stacks 12+ independent technical layers — trend, momentum, volume, regime, multi-timeframe bias, and Smart Money Concepts — and fires Buy/Sell signals only when enough of them agree. Every signal comes with a confidence score, three take-profit levels, position size recommendation, and live outcome tracking.
Built for 4H and Daily crypto charts. No proprietary "secret sauce" — every component is documented and every input is exposed.
━━━━━━━ WHY THIS EXISTS ━━━━━━━
Most multi-indicator scripts stack correlated trend filters (more EMAs, more oscillators) and call it "confluence." That just adds the illusion of agreement without adding independent information.
CUI's filter stack is built from genuinely different signal sources, so when they align, that alignment carries real weight:
• Trend regime — HMA + Supertrend + EMA Ribbon
• Momentum — RSI with proper pivot-to-pivot divergence
• Volume flow — body-weighted Volume Delta + CVD divergence
• Volatility state — Bollinger squeeze + squeeze-release timing
• Market structure — composite of ADX, Choppiness Index, BB-width percentile
• Multi-timeframe — weighted Daily / Weekly / Custom HTF (all offset, no repaint)
• Liquidity & gaps — Fair Value Gaps + Liquidity Sweep detection
• External context — optional BTC trend filter for alt trading
A Buy or Sell only fires when the relevant subset of these align. A built-in "Why-Not" diagnostic table shows you exactly which filter is blocking a near-signal at any moment — turning the indicator into a tunable system rather than a black box.
━━━━━━━ CORE FEATURES ━━━━━━━
TREND & MOMENTUM
▸ Hull Moving Average (configurable length)
▸ Supertrend with ATR factor
▸ 5-EMA Ribbon (8/13/21/34/55) with stacking score
▸ RSI with consecutive-pivot divergence detection
▸ MACD and Stochastic RSI (data window)
VOLUME
▸ Body-weighted Volume Delta (not naive close-position)
▸ Cumulative Volume Delta (CVD)
▸ CVD divergence at confirmed pivots
VOLATILITY & REGIME
▸ Bollinger Bands with squeeze detection and release timing
▸ Composite regime classifier (ADX × CHOP × BB-width)
▸ Background tint for trending vs ranging states
▸ Regime transition labels
SMART MONEY CONCEPTS
▸ Fair Value Gap zones (bullish and bearish)
▸ Liquidity Sweep detection
MULTI-TIMEFRAME
▸ Daily / Weekly / User-defined custom HTF
▸ Weighted confluence score (D 1.0x + W 1.5x + Custom 0.75x)
▸ Optional HTF pivot-based S/R lines
BTC CONTEXT (for alt traders)
▸ Optional BTC trend filter
▸ Relative strength vs BTC
SIGNAL ENGINE
▸ 0-100 confidence score
▸ Configurable minimum confidence threshold
▸ Auto-tune presets (Aggressive / Balanced / Conservative / Custom)
▸ Confirmation bar requirement
▸ Minimum spacing between signals
TRADE MANAGEMENT
▸ Three take-profit levels (TP1/TP2/TP3) with configurable ATR multipliers
▸ Custom % allocation per target
▸ Adaptive SL/TP — different distances in trending vs ranging conditions
▸ Break-even stop activation after TP1
▸ Chandelier ATR trailing stop on runner portion
▸ Position size calculator (account size × risk % × confidence multiplier)
LIVE TRACKING & DIAGNOSTICS
▸ Main dashboard with all current state
▸ Signal log table — last N trades with live TP/SL outcomes
▸ Why-Not diagnostic — which filter is currently blocking each direction
▸ Regime stats — win rate broken down by trending vs ranging
ALERTS
▸ 15+ classic alertcondition triggers
▸ Optional JSON webhook payload for bot integration
━━━━━━━ HOW A BUY SIGNAL FIRES ━━━━━━━
All of the following must be true on the signal bar:
1. HMA trending up
2. RSI above 50
3. Volume delta positive
4. EMA Ribbon score ≥ +3 (at least 4 of 5 aligned bullish)
5. Supertrend bullish
6. HTF confluence score ≥ +1.5
7. Confidence score ≥ user minimum
8. BTC trend bullish (if BTC filter enabled)
9. Price not inside opposing FVG zone (if FVG filter enabled)
10. Market not in strong ranging mode
11. Price more than 0.5 ATR from upper resistance zone
12. Candle body > 50% of range
13. Minimum bars elapsed since last signal
14. Confirmation bar (if enabled)
A Sell signal requires the inverse. On 4H BTC expect roughly 1-3 signals per week in normal conditions. If you see fewer, drop the confidence floor or switch to the Aggressive preset.
━━━━━━━ RECOMMENDED USE ━━━━━━━
▸ Primary: 4H on BTC/USDT, ETH/USDT, and majors
▸ Also works: Daily, 12H, 8H
▸ Use caution below 1H — noise increases, news spikes can trigger wicks
▸ Low-liquidity alts: bump ATR period to 21
WORKFLOW
1. Start on the Balanced preset
2. Watch the dashboard and Why-Not panel for a few sessions
3. Adjust the confidence floor based on signal frequency
4. Enable Regime Stats after chart history accumulates
5. For bots: enable JSON webhook alerts, route via "Any alert() function call"
━━━━━━━ REPAINT DISCLOSURE ━━━━━━━
Full transparency on what does and doesn't repaint:
▸ HMA, Supertrend, EMA Ribbon: repaint on the developing current bar (use bar-close confirmation for live trading)
▸ HTF confluence (D/W/Custom): all use offset — fetch last closed HTF bar only — NO intra-period repaint, NO lookahead
▸ RSI and CVD divergence labels: plotted at confirmed pivot bar (5 bars after the actual pivot). Do NOT appear and disappear.
▸ FVG zones: drawn on confirmation bar of the 3-bar gap pattern. Do not repaint once drawn.
▸ Liquidity sweeps: detected on bar close
▸ Trade outcomes (signal log): evaluated on each closing bar
▸ Regime transition labels: confirmed on bar close
━━━━━━━ HONEST LIMITATIONS ━━━━━━━
▸ This is a decision-support tool, not a complete trading system. Risk management, position discipline, and execution matter more than any indicator.
▸ Signal outcomes in the Regime Stats table are based on bar-close evaluation. Real-fill slippage is not modeled.
▸ Volume Delta is approximated from candle structure, not true tick-level bid/ask (TradingView doesn't expose that without premium feeds).
▸ FVG and liquidity sweep are simplified interpretations of those concepts — pure SMC purists may prefer dedicated tools.
▸ The regime classifier is a heuristic composite. It works well on liquid crypto pairs but can lag at sharp inflection points.
▸ Past performance does not predict future results.
━━━━━━━ SETTINGS OVERVIEW ━━━━━━━
The script has many inputs, grouped by function. For first-time users, the most important groups are:
▸ Preset & Theme → pick Balanced to start
▸ UI Sizing → table text and label sizes
▸ Signal Engine → set Minimum Confidence Score
▸ Tiered Exits → TP/SL multipliers and % allocation
▸ Position Sizing → account size and risk per trade
▸ Alerts & Webhooks → enable JSON for bot trading
Default state shows a clean chart: HMA, Supertrend, BB, regime tint, signal labels, plus three tables (dashboard, signal log, HTF panel). Everything else is one toggle away — EMA Ribbon, FVG boxes, ATR zones, HTF S/R lines, CVD divergence labels, sweep markers, Why-Not diagnostic, Regime Stats.
━━━━━━━ WHAT'S NOT INCLUDED ━━━━━━━
▸ Full strategy() backtest — this is an indicator(). A companion strategy script may be released separately.
▸ Funding rate / open interest overlays — require specific tickers not universally available
▸ Chart pattern recognition (H&S, wedges, etc.)
━━━━━━━ CREDITS ━━━━━━━
Built on Pine Script v6. Uses TradingView built-ins: ta.supertrend, ta.dmi, ta.bb, ta.macd, ta.rsi, ta.pivothigh, ta.pivotlow, ta.valuewhen. Choppiness Index, CVD, FVG detection, liquidity sweep logic, regime classifier, confidence scoring, trade tracking, and confluence weighting are custom implementations.
═══════════════════════════════════════════════
Wskaźnik
Wskaźnik
Wskaźnik
Tetrad Elektro Community v1.0Tetrad Elektro Community is an open-source educational strategy built around Bollinger Band exhaustion, RSI confirmation, and optional bearish divergence logic.
The strategy is designed to identify stretched market conditions where price may be overextended relative to its recent range. Long setups look for price pressing into the lower Bollinger Band with oversold RSI confirmation. Short setups look for upper-band exhaustion, elevated RSI, or bearish divergence where price makes a new high but RSI or MACD fails to confirm.
Suggested use:
This strategy is best studied on the 30-minute or 45-minute chart. It was designed primarily for crypto markets and may work across several liquid crypto assets such as BTC, ETH, SOL, and DOGE. It may also be worth researching on high-liquidity stocks or ETFs, but users should always test each asset individually before relying on any result.
Suggested mode selection:
- Use Long Only in bullish environments.
- Use Short Only in bearish environments.
- Use Long & Short in ranging or two-sided environments.
The strategy includes:
- Bollinger Band mean-reversion logic
- Main RSI and fast RSI filters
- Optional bearish divergence using RSI/MACD confirmation failure
- Optional stop loss
- Optional time stop
- Optional flat-first execution behavior
- Clean chart visuals with optional labels and signal markers
This public community version is intentionally simplified. It does not include Tetrad’s private MLTT/RORO risk engine, execution controller, portfolio allocator, live-routing infrastructure, optimized production parameters, or machine-learning overlays.
This is not financial advice. Backtests are hypothetical and may differ from live execution. Always test on your own market, timeframe, exchange, fee assumptions, and risk model before using any strategy. Strategia
CVD Divergence LiteCVD Divergence Lite:
Cumulative Volume Delta with regular bullish/bearish divergence detection.
Green bars = accumulation. Red bars = distribution.
B/S labels mark divergence signals where CVD disagrees with price — the classic smart-money footprint.
🟢 B = Price making lower low, CVD making higher low (bullish divergence — buyers accumulating)
🔴 S = Price making higher high, CVD making lower high (bearish divergence — distribution at highs)
This is the Lite version. The Pro version adds:
• Hidden divergence (bullish + bearish) — continuation signals
• 3 CVD calculation methods (Direction, Volume-Weighted, Close Location)
• Phone push alerts via TradingView — 4 alert types + combined
• Adjustable sensitivity, pivot bars, and cooldown
• Full color customization
→ Pro version is Invite-only
→ Read the review of the Pro version at theindicatorlab.com
## Category
Volume / Divergence
## Compatible Markets
Stocks, Crypto, Forex, Futures, Indices
## Compatible Timeframes
All (optimized for 15m–4h) Wskaźnik
MACD Slope & Swing MonitorThis script is not just another MACD. It is a highly specialized momentum engine designed to quantify trend exhaustion and visualize structural pivots, making it the perfect tool for trading advanced concepts like the "Anti-Setup" (popularized by Linda Raschke) and Hidden Divergences.
While standard MACD shows you the current momentum, it often lags during complex corrections (like Elliott Wave 4th waves or Flat corrections). This indicator solves this by introducing real-time Slope Quantification and past Swing Pivot Detection.
Key Features & The Logic Behind the Mashup:
Dynamic Slope Quantification: Calculates the exact rate of change (Slope) for both the MACD and Signal lines over a user-defined lookback period. This allows traders to spot momentum decay before an actual crossover occurs. The exact values are displayed on a clean, dynamic label that tracks the current bar.
Structural Swing Detection (Pivots): Uses a 5-bar left/right lookback to plot Swing Highs and Lows directly on the oscillator. By locking these markers to the top and bottom of the pane, the script keeps the MACD lines perfectly clean. This is crucial for instantly identifying Hidden Divergences against previous structural peaks.
Custom MA Engine: Unlike standard built-in MACD, this script allows you to independently change the Moving Average type (SMA, EMA, WMA, RMA) for both the Oscillator and the Signal line. (e.g., using EMA for the oscillator and SMA for the signal to refine trade timing).
How to Use:
Trend Continuation (Hidden Divergence): Look for price to make a Lower High / Higher Low, while the MACD Swing markers show a Higher High / Lower Low.
The "Anti" Trigger: Wait for the MACD Slope to sharply reverse back toward the Signal line in the direction of the primary trend. The real-time label will confirm the momentum shift mathematically before the visual hook forms. Wskaźnik
Wskaźnik
Momentum Matrix [LIVE]### Introduction
Welcome to Momentum Matrix , a multi-dimensional momentum and volatility confluence engine. This indicator combines Linear Geometry (Moving Average Slope) with Derivative Volatility Breakouts (Bollinger Bands applied to a custom MACD line) to create a rigorous, two-step verification system designed to identify high-probability trend expansions while filtering out low-volume market noise and chop.
### How It Works
1. **The Core Trend (MA Angle):** The script normalizes a moving average using an Average True Range (ATR) calculation to determine its precise geometric angle. It flags the trend as bullish or bearish only when the moving average breaks past a user-defined threshold (e.g., 6°), turning flat ranges grey (**No Trade Zone**).
2. **The Volatility Trigger (MACD BB):** A custom MACD line is tracked natively against standard deviation Bollinger Bands. When momentum expands, the MACD line punches outside the bands.
3. **The Confluence Signal:** When **both** systems simultaneously turn bright green or bright red, the script prints a distinct **Confluence Dot** on the zero line, signaling an institutional momentum breakout.
---
### Key Use Cases
*🚀 **Squeeze Play & Volatility Breakout Entries***
Entering the trade on the first Confluence Dot catches the absolute beginning of a macro trend expansion.
*📈 **High-Probability Trend Following***
As long as the lines and histograms stay locked in solid green or red, it proves that the velocity of the move is being actively sustained by volume.
*⚠️ **False Breakout Filter (Staying Out of Chop)***
Many traders lose money by buying a breakout on the price chart, only for it to immediately reverse. This indicator acts as a gatekeeper. If price makes a sudden spike upward, the MACD might briefly flash green. However, if the broader Moving Average Angle remains flat and stuck in the "No Trade Zone," the indicator refuses to print a buy dot, preventing FOMO entries.
*⏱️ **Scalping with the Live Delta Dashboard***
If an asset is moving up but the live angle change starts decaying (e.g., dropping from +2.5° down to +0.2°), it signals a hidden momentum loss—alerting you to take profits before the price action actually stalls out.
---
### Key Features
* **Adaptive MA Selection:** Swap between EMA, SMA, HMA, LSMA, ALMA, and McGinley.
* **Built-in Volatility Filter:** Bollinger Bands track the MACD line directly to confirm momentum expansion.
* **Live Statistics Table:** View current trend angles and live changes on every tick.
* **Strict Non-Repainting Signals:** Confluence triggers confirm at the close of the bar to ensure historical data accuracy.
---
### Credits & Acknowledgments
This script is a customized confluence engine built upon the excellent open-source work of two brilliant developers in the TradingView community. Special thanks to:
* ** @Mango2Juice ** for the foundational logic behind the *Angle of Moving Averages* script.
* ** @Algokid ** for the original concept and design of the *AK MACD BB indicator*.
This version modernizes the calculations into Pine Script v5 , introduces a dynamic real-time tracking dashboard, and establishes a strict non-repainting mathematical handshake between both metrics. Wskaźnik
Harbor Reversal Ledger [JOAT]Harbor Reversal Ledger
Introduction
Harbor Reversal Ledger is an open-source reversal timing indicator that combines completed higher-timeframe candle context with confirmed local RSI divergence.
The objective is not to predict turning points early.
The objective is to wait for enough evidence that a reversal thesis is becoming structurally credible.
Many reversal tools repaint because they depend on unfinished higher-timeframe candles or unconfirmed pivot comparisons.
Harbor Reversal Ledger avoids that by:
requesting completed higher-timeframe candles only
confirming RSI pivots before evaluating divergence
scoring confluence from multiple independent ingredients
projecting higher-timeframe structure onto the execution chart
rendering a timing ledger in its own pane
Core Concepts
1. Completed Higher-Timeframe Context
The script requests prior higher-timeframe candles rather than reading the currently forming candle.
This keeps the higher-timeframe pattern engine stable and non-repainting.
2. Candle Pattern Recognition
Bullish and bearish engulfing patterns can be enabled, and pin-bar style rejection patterns can also be used.
These patterns contribute directional context, not automatic entries.
3. Confirmed RSI Divergence
Local price and RSI pivots are both confirmed using left/right pivot logic.
Only after the pivots are locked does the script compare price progression against RSI progression to determine bullish or bearish divergence.
4. Distance-to-Extreme Scoring
Reversal evidence becomes more meaningful when price is still close to a recent extreme.
The confluence engine therefore includes distance-based scoring relative to a configurable lookback.
5. Projection and Confluence Zones
Completed higher-timeframe candles can be projected forward on the execution chart, while divergence events can create local confluence zones when the evidence stack is strong enough.
Features
Completed HTF candle projection: prior higher-timeframe range and body projected onto the chart
HTF pattern engine: bullish and bearish engulfing and pin-bar style patterns
Confirmed RSI divergence: bullish and bearish divergence using pivot confirmation
Dual-pane logic: overlay objects explain price context while the pane acts as a reversal timing ledger
Confluence scoring: combines HTF pattern, local divergence, and distance-to-extreme logic
Premium/discount context: position of price relative to the HTF midpoint is plotted
Confluence zones: optional chart zones highlight stronger bullish or bearish reversal regions
State-based RSI coloring: RSI line color reflects the current net confluence
Top-right dashboard: summarizes pattern state, divergence state, confluence, and location context
Non-repainting design: no unfinished HTF candles and no unconfirmed pivot divergence
Input Parameters
Higher Timeframe Context
HTF Candle Source
Enable Engulfing Patterns
Enable Pin Bar Patterns
Project Completed HTF Candle
Projection Offset Bars
Projection Width Bars
Execution Divergence
RSI Length
Pivot Left
Pivot Right
Show Divergence Lines
Show Confluence Zones
Confluence Engine
Distance Lookback
Distance Weight
Pattern Weight
Divergence Weight
Display
Show RSI State Fill
Dashboard Position
Dashboard Size
How to Use This Indicator
Step 1: Start With the Higher-Timeframe Projection
Use the projected completed candle to understand whether the larger reference bar is signaling rejection, acceptance, or neutrality.
Step 2: Wait for Local Divergence Confirmation
The script intentionally waits for confirmed pivots.
That delay is a feature, not a flaw.
Step 3: Read the Net Confluence, Not Just RSI
The pane is not meant to be treated like a normal RSI oscillator.
Its color and context matter because they reflect the broader reversal evidence stack.
Step 4: Use Confluence Zones as Areas of Interest
Zones identify places where the higher-timeframe context and local divergence align.
They are not guaranteed turning points.
Step 5: Respect the Directional Imbalance
If the higher-timeframe candle context is strongly bearish, a minor bullish divergence alone may not be enough to justify a reversal thesis, and vice versa.
Indicator Limitations
Confirmed divergence necessarily appears after the pivot forms, which introduces intentional timing delay
Higher-timeframe pattern quality depends on the selected timeframe and instrument behavior
RSI divergence can persist without immediate reversal in strong directional markets
Projection objects are context tools, not price targets
Originality Statement
Harbor Reversal Ledger is designed as a confluence ledger rather than a single-pattern reversal marker.
Its distinguishing structure comes from pairing completed higher-timeframe candle analysis, confirmed divergence, distance scoring, projected context, and pane-based confluence visualization into one disciplined, non-repainting timing framework.
Disclaimer
This indicator is provided for educational and informational purposes only.
It is not financial advice and should not be used as a standalone reason to enter or exit a market.
All reversal readings are based on historical chart data and can fail, especially in strongly trending or event-driven conditions.
Use proper risk management and independent judgment.
Wskaźnik
Strategia
Strategia
Strategia
RSI & MACD MTF Station [v2c_cha]Overview
The RSI & MACD MTF Heatmap Station is a comprehensive, all-in-one momentum and trend analysis tool designed to eliminate chart clutter. Traditionally, traders relying on Multi-Timeframe (MTF) analysis must either split their screens into multiple layouts or flood their indicator panels with overlapping "spaghetti" lines. This indicator solves that problem by consolidating the Relative Strength Index (RSI) and Moving Average Convergence Divergence (MACD) across 9 different timeframes into a single, compact visual Heatmap.
Core Concepts & Calculations
This indicator relies on the standard mathematical formulas for RSI (default 14 periods) and MACD (default 12, 26, 9). However, its core value lies in how it processes and displays this data:
Non-Repainting MTF Data: All higher-timeframe data is fetched using barmerge.lookahead_off and barmerge.gaps_off to ensure strict compliance with non-repainting rules. What you see on historical bars is exactly what would have printed in real-time.
Visual Anchoring: To display both the current RSI and current MACD lines harmoniously in the same pane without skewing the scale, the MACD line is mathematically anchored to the RSI's 50-level (neutral line).
How to Read the Heatmap Dashboard
The dashboard is a 9-column by 3-row matrix located in the corner of your screen, covering timeframes from 1-minute to 1-Month.
Row 1 (RSI - Extreme Momentum): This row measures whether an asset is mathematically overbought or oversold.
🔴 Red (RSI >= 70): Overbought. The asset is extended to the upside in this specific timeframe.
🟢 Green (RSI <= 30): Oversold. The asset is extended to the downside.
⚫ Dark Gray (31-69): Neutral. The asset is flowing within normal momentum boundaries.
Row 2 (MACD - Trend Direction): This row measures the overarching trend control based on the MACD main line crossing the Zero line.
🟢 Green (MACD > 0): Bullish trend control.
🔴 Red (MACD < 0): Bearish trend control.
Practical Trading Application (Top-Down Analysis)
This tool excels at spotting high-probability continuation setups by aligning the macro-trend with micro-momentum pullbacks.
Example Setup (The Buy Dip): A trader observing a 5-minute chart looks at the dashboard. The MACD row shows Green for the 1H and 4H timeframes, indicating a strong macro bullish trend. However, the RSI row shows Green (< 30) for the 5m and 15m timeframes. This tells the trader that while the macro trend is up, there is short-term panic/oversold conditions. This alignment provides a mathematical, rules-based area to look for long entries (buying the dip) in the direction of the macro trend.
Key Features & Customization
Fully Customizable: You can change the lengths and smoothing periods for both the RSI and MACD.
Dashboard Positioning: Move the heatmap to any corner of the screen to fit your layout.
Decluttered Charting: By default, only the current timeframe's RSI and MACD lines are plotted, while all MTF data is neatly organized inside the heatmap.
Disclaimer: This indicator is for educational and analytical purposes only. It does not provide financial advice or guarantee profitable trades. Always combine momentum and trend indicators with proper risk management and price action analysis. Wskaźnik
ADX/ MACD/ 200 EMA Strawberry Signals 🍓 Strawberry Signals 🍓
The Strawberry Signals indicator is a trend-following trading tool designed to help traders identify high-probability market entries by combining three core components:
trend direction (EMA 200), momentum (MACD), and trend strength (ADX) .
Signals are only displayed on confirmed candles to ensure stability and avoid repainting behavior.
📌 Indicator Concept
This indicator focuses on trading in the direction of the dominant trend. Instead of generating frequent signals, it filters out low-quality market conditions and only highlights setups where trend, momentum, and strength are aligned.
The goal is to reduce noise and help traders focus on clearer market structures rather than overtrading in sideways conditions.
📊 Core Components
1. EMA 200 – Trend Filter
The EMA 200 is used as the primary trend direction filter.
- Price above EMA 200 → bullish market structure
- Price below EMA 200 → bearish market structure
This ensures that signals are always aligned with the higher timeframe bias of the market.
2. MACD – Momentum Confirmation
The MACD crossover is used to confirm momentum shifts in the direction of the trend:
- Bullish signal: MACD line crosses above signal line
- Bearish signal: MACD line crosses below signal line
This helps identify moments where momentum supports the trend direction.
3. ADX – Trend Strength Filter
The ADX is used to measure whether the market is strong enough for trend trading.
Only when ADX is above the selected threshold (default: 20) will signals be allowed.
- Low ADX → weak or sideways market (no signals)
- High ADX → strong trend conditions (valid signals)
🟢 Buy Signal Conditions
Price is above the EMA 200
MACD line crosses above the signal line
ADX is above the defined threshold (trend strength confirmed)
Signal is confirmed on candle close (no intrabar signals)
🔴 Sell Signal Conditions
Price is below the EMA 200
MACD line crosses below the signal line
ADX is above the defined threshold (trend strength confirmed)
Signal is confirmed on candle close (no intrabar signals)
⚙️ Settings Overview
EMA Length: Defines the trend filter (default: 200)
MACD Settings: Controls momentum sensitivity (fast, slow, signal)
ADX Length: Smoothness of trend strength calculation
ADX Threshold: Minimum trend strength required for signals
📉 Market Conditions
This indicator performs best in trending environments where price moves directionally with momentum.
During sideways or low-volatility conditions, fewer signals will appear by design, as weak trends are filtered out.
👤 My Personal Use
This indicator is intentionally designed to produce fewer signals. Entries are only generated at the exact moment of a MACD crossover when all required conditions are aligned. I use it for XAUUSD on the 1M chart but I'm confident for it to work on different instruments.
In my personal trading, I also monitor situations where the ADX rises above the threshold after the MACD crossover. If momentum remains strong and the overall trend structure (EMA direction) is still valid, these scenarios can still offer interesting trade opportunities even if no signal was printed.
For better decision-making, I recommend displaying the MACD and ADX directly on the chart alongside this indicator. This helps to visually confirm momentum development for trading and trend strength beyond the signal itself.
⚠️ Important Notes
This indicator is designed for educational and analytical purposes.
It does not guarantee profitable trades.
Always combine signals with proper risk management and additional confirmation tools and market structure if needed.
🍓 Summary
Strawberry Signals provides a clean and structured approach to trend trading by combining multiple technical indicators into a single signal system.
It is built to reduce noise, filter weak setups, and highlight only high-quality trend-aligned opportunities directly on the chart.
Wskaźnik
MACD + RSI + MFI + A/D by Ismael█ OVERVIEW
A 4-in-1 oscillator panel combining MACD, RSI with Bollinger Bands and
custom Buy/Sell signals, Money Flow Index (MFI), and Accumulation/Distribution.
Each module can be toggled on/off independently from a single "Toggle
Indicators" group, so the user can display only what they need instead of
loading four separate scripts.
═══════════════════════════════════════════════════════════════════════
█ ORIGINALITY
This script does not invent new math — it integrates four well-known
built-in indicators into a single pane and adds three conveniences:
- A unified toggle system to show/hide each indicator on demand.
- A custom RSI signal layer based on Bollinger Band breakouts of the
RSI itself, combined with the classic overbought/oversold zones.
- An A/D module that replicates the configuration style of the
MetaTrader 5 implementation (Tick/Real volume option and configurable
horizontal levels).
═══════════════════════════════════════════════════════════════════════
█ WHAT IT INCLUDES
▪ MACD (default: ON)
Standard MACD with configurable fast/slow lengths, signal smoothing,
and choice of SMA or EMA for both the oscillator and signal line.
Includes alerts for histogram polarity changes.
▪ RSI with Bollinger Bands and Buy/Sell signals (default: ON)
Classic RSI with optional smoothing MA (SMA, EMA, WMA, VWMA, SMMA,
or SMA + Bollinger Bands). When "SMA + Bollinger Bands" is selected:
- Buy signal: RSI closes below its lower Bollinger Band AND below 30.
- Sell signal: RSI closes above its upper Bollinger Band AND above 70.
Signals are plotted as arrows and include alert conditions.
▪ MFI (default: OFF)
Standard Money Flow Index with 80/50/20 horizontal levels.
▪ Accumulation/Distribution (default: OFF)
Classic cumulative A/D line. Configurable like the MT5 version:
- Volume mode: Real or Tick (1 per bar, useful for FX).
- 3 user-defined horizontal levels with individual visibility/color.
- Color and line width.
Includes alerts for crossovers against its own SMA(20).
═══════════════════════════════════════════════════════════════════════
█ HOW TO USE
1. Activate from "Toggle Indicators" only the modules you need.
2. RSI Buy/Sell signals are intended as confluence — not standalone
entries. They mark statistically rare conditions (extreme RSI combined
with a Bollinger Band breakout on the RSI) and should be confirmed
with price action, structure, or trend context.
3. MACD histogram polarity alerts can be paired with RSI signals.
4. The A/D line is most useful when watched for divergences against price,
not for its absolute value.
═══════════════════════════════════════════════════════════════════════
█ LIMITATIONS
- The A/D line uses cumulative values that produce very large numbers.
When combined with MACD/RSI/MFI in the same pane, auto-scale will
compress the smaller-range indicators. Workaround: right-click the
A/D plot → "Pin to scale" → assign it to a separate scale.
- "Tick" volume here is approximated as 1 per bar; Pine Script does not
expose the tick-volume data used by MetaTrader 5. For instruments with
reliable real volume, use "Real".
- RSI Buy/Sell signals only fire when the smoothing MA type is set to
"SMA + Bollinger Bands". Other MA types disable the signal layer.
- This is an aggregator/utility script. It does not predict market
direction and is not a complete trading system.
═══════════════════════════════════════════════════════════════════════
█ DISCLAIMER
This script is shared for educational purposes only and is not financial
advice. Indicator signals do not guarantee future results. Always perform
your own analysis and apply proper risk management.
═══════════════════════════════════════════════════════════════════════
█ DESCRIPCIÓN (Español)
Panel de osciladores 4-en-1 que combina MACD, RSI con Bandas de Bollinger
y señales de compra/venta, MFI y Acumulación/Distribución. Cada módulo se
activa o desactiva de forma independiente desde el grupo "Toggle
Indicators".
Incluye:
- MACD estándar con alertas de cambio de polaridad del histograma.
- RSI con MA opcional (SMA, EMA, WMA, VWMA, SMMA o SMA+BB). Cuando
se elige "SMA + Bandas de Bollinger", aparecen señales:
- Compra: RSI por debajo de la banda inferior Y menor a 30.
- Venta: RSI por encima de la banda superior Y mayor a 70.
- MFI estándar con niveles 80/50/20.
- Acumulación/Distribución estilo MT5: volumen Real/Tick, 3 niveles
horizontales configurables, color y grosor ajustables, alertas de
cruce contra su SMA(20).
Las señales del RSI son herramientas de confluencia, no entradas
automáticas. La línea A/D se interpreta principalmente por divergencias
con el precio, no por su valor absoluto. Al activar A/D junto con los
demás osciladores, conviene moverla a una escala separada (clic derecho
sobre la línea → "Fijar a escala" → escala nueva).
Este script tiene fines educativos. No constituye asesoría financiera.
█ HOW TO USE
The RSI Buy/Sell signals (with their attached alerts) are the main
actionable element of this script and can be used to anticipate potential
entries — long on Buy signals, short on Sell signals. They fire under
statistically rare conditions (RSI breaking out of its own Bollinger Band
envelope while also being in extreme oversold/overbought territory),
which often precede a reversion or a meaningful move.
However, these signals should NOT be taken as standalone entries. They
work best as an early-warning system that must be confirmed before
acting on them. Recommended workflow:
1. RSI Buy/Sell signal fires → set alert and prepare the trade idea.
2. Look at the MACD for confirmation:
- For a Buy: histogram should be turning from falling to rising,
or MACD line crossing above Signal.
- For a Sell: histogram turning from rising to falling, or MACD
line crossing below Signal.
3. Check the MFI (if enabled): values pulling back from oversold (<20)
on Buys, or pulling back from overbought (>80) on Sells, add
confluence by confirming a money-flow shift.
4. Check the A/D line for divergences with price:
- Bullish divergence (price makes lower low, A/D makes higher low)
strongly supports a Buy signal.
- Bearish divergence (price makes higher high, A/D makes lower
high) strongly supports a Sell signal.
Divergences on RSI itself against price work the same way and are
one of the most reliable confirmation tools in this panel.
5. Always combine with price-action context: trend direction on higher
timeframes, key support/resistance, and your own risk management.
In short: the RSI signals are designed to ANTICIPATE trades, not to
trigger them automatically. The other modules (MACD, MFI, A/D) and
divergence analysis exist to filter the false positives and validate
the ones worth taking.
═══════════════════════════════════════════════════════════════════════
█ CÓMO USAR (Español)
Las señales de Compra/Venta del RSI (con sus alertas configuradas) son
el elemento principal accionable de este script y pueden usarse para
anticipar entradas — largos en señales de Compra, cortos en señales de
Venta. Se activan en condiciones estadísticamente poco frecuentes
(el RSI rompe su propia envolvente de Bandas de Bollinger mientras
está en zona de sobreventa o sobrecompra extrema), que suelen preceder
una reversión o un movimiento significativo.
Sin embargo, NO deben tomarse como entradas automáticas. Funcionan
mejor como un sistema de alerta temprana que debe confirmarse antes
de operar. Flujo recomendado:
1. Se dispara la señal del RSI → preparar la idea de trade.
2. Confirmar con MACD:
- Compra: histograma pasando de bajista a alcista, o cruce
del MACD por encima de la Signal.
- Venta: histograma pasando de alcista a bajista, o cruce
del MACD por debajo de la Signal.
3. Confirmar con MFI (si está activo): valores saliendo de
sobreventa (<20) en Compras o saliendo de sobrecompra (>80)
en Ventas indican un cambio en el flujo de dinero.
4. Buscar divergencias en la línea A/D contra el precio:
- Divergencia alcista (precio hace mínimo más bajo, A/D hace
mínimo más alto) refuerza una señal de Compra.
- Divergencia bajista (precio hace máximo más alto, A/D hace
máximo más bajo) refuerza una señal de Venta.
Las divergencias del propio RSI contra el precio funcionan igual
y son una de las confirmaciones más fiables de este panel.
5. Siempre combinar con contexto de price action: tendencia en
temporalidades superiores, soportes/resistencias clave y gestión
de riesgo propia.
En resumen: las señales del RSI están diseñadas para ANTICIPAR
trades, no para dispararlos automáticamente. Los otros módulos
(MACD, MFI, A/D) y el análisis de divergencias existen para filtrar
los falsos positivos y validar las entradas que realmente valen
la pena. Wskaźnik
SwissTradeAcademy Money PrinterThe SwissTradeAcademy Money Printer is a professional-grade, multi-component trading indicator developed in Pine Script v6. It combines three powerful analysis methodologies into a single, high-performance tool, designed to keep your TradingView charts clean while providing comprehensive market insights.
Core Components
1. Super Bollinger Trend (SBT)
A dynamic trend-following system based on Bollinger Band volatility.
Trend Tracking: Uses an adaptive baseline that shifts based on price action and volatility.
Integrated ZigZag: Automatically identifies and connects local highs and lows to visualize market structure.
Signal Labels: Provides clear visual markers for trend shifts and price targets.
2. MACD Price Overlay
Unlike standard oscillators that sit in a separate pane, this MACD is projected directly onto the price chart.
Trend Momentum: Features a dual-line MACD (Fast/Slow) and a Signal line that change color based on momentum direction.
Visual Fill: Uses a dynamic color cloud to represent the gap between the MACD and Signal lines, highlighting bullish and bearish strength.
SMA 89 Filter: Includes a long-term 89-period Simple Moving Average to identify the "Golden Mean" and primary market direction.
3. 4-in-1 Multi-Timeframe MAs
A flexible Moving Average engine that allows for deep customization.
Versatile Types: Choose from SMA, EMA, WMA, RMA, HMA, or VWMA.
Multi-Timeframe (MTF) Support: Plot MAs from higher timeframes (e.g., 1H or Daily) directly onto your current lower-timeframe chart.
Custom Sources: Calculate averages based on Open, High, Low, Close, or HL2.
Key Features
Pine Script v6 Optimized: Built with the latest TradingView standards for maximum execution speed and reliability.
Organized Settings: All parameters are logically grouped in the "Inputs" tab for easy configuration.
Clean Interface: Combines three indicators into one, saving valuable indicator slots for free-tier users and reducing chart clutter.
How to Use
Trend Confirmation: Look for alignment between the Super Bollinger Trend color and the MACD cloud color.
Support & Resistance: Use the 89 SMA and the 200 EMA (MA 1) as major "institutional" levels for trade entries or exits.
Volatility Alerts: The ZigZag labels help track the distance of moves, assisting in setting realistic Take Profit levels. Wskaźnik
MACD + 200 EMA + Support/Resistance Strategy This open-source strategy is an educational Pine Script implementation of a MACD + 200 EMA + support/resistance trading concept.
It was created to convert a visually explained strategy idea into clear, testable rules, so traders can study how the logic behaves under backtesting conditions.
The strategy combines three main components:
1. MACD momentum logic
2. A 200 EMA trend filter
3. A pivot-based support and resistance filter
For long setups, the strategy looks for a bullish MACD crossover below the zero line, while price is above the 200 EMA.
For short setups, the strategy looks for a bearish MACD crossover above the zero line, while price is below the 200 EMA.
A support and resistance filter can also be enabled. This filter uses confirmed pivot levels, wick-based touches, ATR-based tolerance, and a maximum level age to create a more objective interpretation of support and resistance behavior.
Main features:
- MACD default settings
- 200 EMA trend filter
- Optional pivot-based support and resistance filter
- Confirmed pivots only
- Wick-based touch detection
- ATR-based tolerance
- Long and short logic
- Multiple stop-loss modes
- Risk/reward based take-profit logic
- Optional pyramiding controls
- Strategy backtesting support
Stop-loss logic:
The script includes more than one stop-loss interpretation because the original concept does not define the stop placement with full precision.
Stop option 1:
A stop placed above or below the 200 EMA by a user-defined number of ticks.
Stop option 2:
A stop placed at the nearest valid swing within a user-defined lookback window. If no valid swing is found, the script falls back to the EMA-based stop.
Take-profit logic:
The take-profit target is calculated using a fixed risk/reward multiple based on the distance between entry and stop-loss.
Default risk/reward:
1.5R
Execution assumptions:
- Entries are placed on the next candle open after the signal bar.
- Exits are handled through stop-loss and take-profit only.
- MACD is calculated on close.
- EMA is calculated on close.
- Support and resistance levels are based on confirmed pivots only.
- The strategy is designed for educational backtesting and research, not for automatic live trading.
Important backtesting notes:
Backtest results can vary significantly depending on the symbol, timeframe, commission, slippage, spread, data provider, and strategy settings.
Users should always adjust commission and slippage settings to match the market being tested. A zero-cost setup may produce unrealistic results.
This script does not guarantee profitability, future performance, or a specific win rate.
This is not the original creator’s code. It is a testable logical interpretation of the strategy idea, built by converting unclear visual rules into explicit Pine Script conditions.
If you believe a different interpretation of the unclear parts would be more accurate, you can modify the open-source code and test your own version.
Disclaimer:
This script is provided for educational and research purposes only. It is not financial advice, investment advice, or a recommendation to buy, sell, short, or trade any asset.
Trading involves risk. Past performance and backtested results do not guarantee future results. Always do your own research and test thoroughly before using any strategy in live market conditions.
No strategy, indicator, or backtest can guarantee profits or eliminate trading risk. Strategia
Wskaźnik
Wskaźnik
