OPEN-SOURCE SCRIPT
FVG Sniper [JOAT]
═══ FVG SNIPER [JOAT] ═══
A complete Fair Value Gap engine that finds price imbalances, grades their quality, tracks how they fill, mitigate and invert, and then paints a full trade blueprint the moment a clean setup fires. One gap is spotlighted as the strongest, and every signal arrives with entry, three targets, a stop, and colored risk/reward zones — no arrows, no clutter.
▎ WHAT IT DOES
FVG Sniper detects three-candle fair value gaps (imbalances), scores each one from 0–10, and monitors its life cycle: how much of the gap has been filled, whether it has been mitigated (wick-tapped through), and whether price has closed fully through it to flip its role into an Inverted FVG (IFVG). When a graded gap produces a rejection or an IFVG flip that agrees with the higher-timeframe bias, it draws a structured trade plan and reports the whole picture in a dashboard.
▎ HOW IT WORKS
• Gap detection — a bullish gap forms when the current low sits above the high from two bars back; a bearish gap forms when the current high sits below the low from two bars back.
• Quality filters — each candidate must clear a minimum gap size (as a multiple of ATR) and a minimum displacement body ratio on the impulse candle, so tiny or weak imbalances are ignored.
• Grade (0–10) — blends gap size, the displacement range of the middle candle, and relative volume into a single score. Only gaps at or above your minimum grade may fire a signal.
• Fill & mitigation — the engine tracks the running extreme inside each gap to compute a live fill percentage, and marks a gap mitigated once a wick fully traverses it.
• Inversion (IFVG) — when price closes fully through a gap, its role flips; the box restyles to a dashed amber accent and the flip is logged.
• Signals — two sources you can mix or isolate: Rejection (price retraces into a live gap and reacts back out with a directional close) and IFVG Flip (a mitigated gap is closed through, confirming continuation).
• HTF bias filter — an optional higher-timeframe EMA bias must agree with the signal direction before it is allowed.
• Trade model — on a fresh signal it sets entry at close, a stop either gap-protected (just beyond the triggering gap boundary) or ATR-based, with risk clamped between a floor and a cap. Targets TP1/TP2/TP3 are placed at your chosen R multiples.
• Non-repainting — all detection, scoring and signals evaluate on confirmed (closed) bars only, and the HTF request uses no lookahead.
▎ HOW TO USE IT
• Trade in the direction of the BUY / SELL pill. The stars and score on the pill show the grade of the gap that triggered it.
• The entry line (chrome), dashed stop, and TP1/TP2/TP3 lines map the plan directly on the chart; level labels on the right print exact prices and R values.
• The green zone is the target/reward area from entry to TP3; the red zone is the risk area between entry and stop — a fast visual read of the trade's R:R.
• A single ★ spotlight tags only the strongest active gap, so you always know the best imbalance in view.
• Use live gaps as decision zones: watch the fill % of the nearest gap, and treat an IFVG flip as a shift in short-term control.
• When a trade closes, a result label prints the outcome (TP hit, stop, or exit at R) so completed setups stay readable.
• Combine with your own structure, session and news context — the gap engine locates the where, you confirm the when.
▎ KEY SETTINGS
• Engine — enable bullish/bearish detection, choose the signal source (Rejection, IFVG Flip, or both), and cap how many gaps stay visible plus their lifetime and box extension.
• Filters — ATR length, minimum gap size, minimum displacement body ratio, minimum grade, the HTF bias filter (timeframe + EMA length), and whether a directional rejection close is required.
• Trade Model — stop basis (Gap-Protected vs ATR), stop buffer/distance, risk floor and cap, TP1–TP3 in R, max trade duration, zone projection, and how many completed trades to keep.
• Visuals — toggle gap boxes, midline, hide-mitigated declutter, grade spotlight, IFVG styling, signal pills, zone boxes, lines, level and result labels, zone-reader candle coloring, optional VWAP + σ bands, and all colors/transparency/sizes.
• Dashboard — show/hide, position, text size, and dark or light panel.
▎ DASHBOARD
The on-chart panel reports: HTF bias, count of active bullish and bearish gaps, the nearest gap price and its fill %, the strongest gap's star grade, the last IFVG flip (with bar age), the active signal, any live trade with its entry, and running totals of bullish / bearish / inverted gaps detected.
▎ ALERTS
• BUY signal
• SELL signal
• Bullish IFVG Flip (inversion up)
• Bearish IFVG Flip (inversion down)
▎ NOTES
• Works on all timeframes and all assets — indices, forex, crypto, stocks, futures.
• Signals and drawings are computed on closed bars, so they do not repaint after the bar confirms.
• Object caps and hide-mitigated / declutter toggles keep the chart clean even on long histories.
• Any on-chart result labels reflect historical signals only and are illustrative, not a performance guarantee.
For research and education only. This is not financial advice. No indicator can predict the future, and past behavior does not guarantee future results — always manage your own risk.
Made with passion by JackOfAllTrades ⚡
A complete Fair Value Gap engine that finds price imbalances, grades their quality, tracks how they fill, mitigate and invert, and then paints a full trade blueprint the moment a clean setup fires. One gap is spotlighted as the strongest, and every signal arrives with entry, three targets, a stop, and colored risk/reward zones — no arrows, no clutter.
▎ WHAT IT DOES
FVG Sniper detects three-candle fair value gaps (imbalances), scores each one from 0–10, and monitors its life cycle: how much of the gap has been filled, whether it has been mitigated (wick-tapped through), and whether price has closed fully through it to flip its role into an Inverted FVG (IFVG). When a graded gap produces a rejection or an IFVG flip that agrees with the higher-timeframe bias, it draws a structured trade plan and reports the whole picture in a dashboard.
▎ HOW IT WORKS
• Gap detection — a bullish gap forms when the current low sits above the high from two bars back; a bearish gap forms when the current high sits below the low from two bars back.
• Quality filters — each candidate must clear a minimum gap size (as a multiple of ATR) and a minimum displacement body ratio on the impulse candle, so tiny or weak imbalances are ignored.
• Grade (0–10) — blends gap size, the displacement range of the middle candle, and relative volume into a single score. Only gaps at or above your minimum grade may fire a signal.
• Fill & mitigation — the engine tracks the running extreme inside each gap to compute a live fill percentage, and marks a gap mitigated once a wick fully traverses it.
• Inversion (IFVG) — when price closes fully through a gap, its role flips; the box restyles to a dashed amber accent and the flip is logged.
• Signals — two sources you can mix or isolate: Rejection (price retraces into a live gap and reacts back out with a directional close) and IFVG Flip (a mitigated gap is closed through, confirming continuation).
• HTF bias filter — an optional higher-timeframe EMA bias must agree with the signal direction before it is allowed.
• Trade model — on a fresh signal it sets entry at close, a stop either gap-protected (just beyond the triggering gap boundary) or ATR-based, with risk clamped between a floor and a cap. Targets TP1/TP2/TP3 are placed at your chosen R multiples.
• Non-repainting — all detection, scoring and signals evaluate on confirmed (closed) bars only, and the HTF request uses no lookahead.
▎ HOW TO USE IT
• Trade in the direction of the BUY / SELL pill. The stars and score on the pill show the grade of the gap that triggered it.
• The entry line (chrome), dashed stop, and TP1/TP2/TP3 lines map the plan directly on the chart; level labels on the right print exact prices and R values.
• The green zone is the target/reward area from entry to TP3; the red zone is the risk area between entry and stop — a fast visual read of the trade's R:R.
• A single ★ spotlight tags only the strongest active gap, so you always know the best imbalance in view.
• Use live gaps as decision zones: watch the fill % of the nearest gap, and treat an IFVG flip as a shift in short-term control.
• When a trade closes, a result label prints the outcome (TP hit, stop, or exit at R) so completed setups stay readable.
• Combine with your own structure, session and news context — the gap engine locates the where, you confirm the when.
▎ KEY SETTINGS
• Engine — enable bullish/bearish detection, choose the signal source (Rejection, IFVG Flip, or both), and cap how many gaps stay visible plus their lifetime and box extension.
• Filters — ATR length, minimum gap size, minimum displacement body ratio, minimum grade, the HTF bias filter (timeframe + EMA length), and whether a directional rejection close is required.
• Trade Model — stop basis (Gap-Protected vs ATR), stop buffer/distance, risk floor and cap, TP1–TP3 in R, max trade duration, zone projection, and how many completed trades to keep.
• Visuals — toggle gap boxes, midline, hide-mitigated declutter, grade spotlight, IFVG styling, signal pills, zone boxes, lines, level and result labels, zone-reader candle coloring, optional VWAP + σ bands, and all colors/transparency/sizes.
• Dashboard — show/hide, position, text size, and dark or light panel.
▎ DASHBOARD
The on-chart panel reports: HTF bias, count of active bullish and bearish gaps, the nearest gap price and its fill %, the strongest gap's star grade, the last IFVG flip (with bar age), the active signal, any live trade with its entry, and running totals of bullish / bearish / inverted gaps detected.
▎ ALERTS
• BUY signal
• SELL signal
• Bullish IFVG Flip (inversion up)
• Bearish IFVG Flip (inversion down)
▎ NOTES
• Works on all timeframes and all assets — indices, forex, crypto, stocks, futures.
• Signals and drawings are computed on closed bars, so they do not repaint after the bar confirms.
• Object caps and hide-mitigated / declutter toggles keep the chart clean even on long histories.
• Any on-chart result labels reflect historical signals only and are illustrative, not a performance guarantee.
For research and education only. This is not financial advice. No indicator can predict the future, and past behavior does not guarantee future results — always manage your own risk.
Made with passion by JackOfAllTrades ⚡
Скрипт с открытым кодом
В истинном духе TradingView, создатель этого скрипта сделал его открытым исходным кодом, чтобы трейдеры могли проверить и убедиться в его функциональности. Браво автору! Вы можете использовать его бесплатно, но помните, что перепубликация кода подчиняется нашим Правилам поведения.
The AI Trading Ecosystem, Built to win trades 📈
Get Full Access 👇
jackofalltrades.vip 🌐
t.me/jackofalltradesvip 🃏
Get Full Access 👇
jackofalltrades.vip 🌐
t.me/jackofalltradesvip 🃏
Отказ от ответственности
Информация и публикации не предназначены для предоставления и не являются финансовыми, инвестиционными, торговыми или другими видами советов или рекомендаций, предоставленных или одобренных TradingView. Подробнее читайте в Условиях использования.
Скрипт с открытым кодом
В истинном духе TradingView, создатель этого скрипта сделал его открытым исходным кодом, чтобы трейдеры могли проверить и убедиться в его функциональности. Браво автору! Вы можете использовать его бесплатно, но помните, что перепубликация кода подчиняется нашим Правилам поведения.
The AI Trading Ecosystem, Built to win trades 📈
Get Full Access 👇
jackofalltrades.vip 🌐
t.me/jackofalltradesvip 🃏
Get Full Access 👇
jackofalltrades.vip 🌐
t.me/jackofalltradesvip 🃏
Отказ от ответственности
Информация и публикации не предназначены для предоставления и не являются финансовыми, инвестиционными, торговыми или другими видами советов или рекомендаций, предоставленных или одобренных TradingView. Подробнее читайте в Условиях использования.