OPEN-SOURCE SCRIPT
Xiznit Scalper
Xiznit Scalper
The Xiznit Scalper is a high-probability intraday scalping strategy designed for futures markets, built around adaptive regime filtering, multi-mode signal generation, and session-aware trade management. It is engineered to only fire entries during favorable market conditions — filtering out flat, choppy, or low-conviction environments entirely.
Efficiency Ratio Regime Filter
At the core of the strategy is an Efficiency Ratio (ER) engine that classifies market conditions in real time into three regimes:
Trending (Grade A) — Strong directional efficiency. All signal modes active.
Mild Ranging (Grade B) — Moderate structure present. Mean-reversion and structure-based modes active.
Flat / Blocked — No directional efficiency detected. All entries suppressed.
Every trade is graded and labeled directly on the chart, so you always know the market context behind each signal.
Four Selectable Signal Modes
Choose the entry logic that fits your style and market conditions:
EMA Cross — Fast/slow EMA crossover with trending regime confirmation. Clean, reactive, trend-following entries.
VWAP Deviation — Mean-reversion entries when price stretches beyond a configurable threshold from the session VWAP. Works in both trending and mild ranging regimes.
Heikin Ashi + RSI — Two consecutive Heikin Ashi candles in the same direction confirmed by an RSI threshold. Filters neutral-zone signals automatically.
Price Structure — Zero-lag candle-based Higher High / Higher Low (long) and Lower High / Lower Low (short) detection. No pivot lag — signals fire on the current bar.
Session-Based Trade Management
Trading is divided into three independent sessions — Asia, London, and New York — each with its own enable toggle, configurable time boundaries, and maximum trade counter that resets at each session open. A global cooldown bars setting prevents signal clustering within any single move.
Five Independent Entry Filters
Each filter can be toggled on or off independently and works across all four signal modes:
Volume Surge — Requires current bar volume to exceed its moving average by a configurable multiplier. Eliminates entries on thin, unconvincing tape.
ADX Strength — Gates entries on minimum ADX value. Confirms trend momentum strength independent of direction, complementing the ER filter.
HTF Trend Alignment — Restricts longs to above a higher timeframe EMA and shorts to below it. Timeframe and EMA length are fully user-configurable. Uses confirmed closed bars — no repainting.
VWAP Bias — Longs above session VWAP only, shorts below only. Automatically disabled when VWAP Deviation signal mode is active to prevent conflicting logic.
ROC Momentum — Requires positive Rate of Change for longs and negative for shorts. Ensures entries align with recent directional momentum.
ATR-Based Stop Loss and Take Profit
Stops and targets adapt dynamically to current market volatility. Stop loss is placed at entry ± (ATR × multiplier). Take profit is calculated as a configurable R:R ratio of the stop distance. Both are set at entry and do not move.
Automation Ready
The strategy includes fully configurable JSON alert payloads for entry and exit events, compatible with webhook-based automation platforms. Use {{strategy.order.alert_message}} in the TradingView alert message field.
Visual Feedback
Trade grade labels — A (bright green) or B (dark green) float above/below each entry candle with the signal mode that triggered it.
ER regime background — Teal for trending, yellow for mild ranging, gray for flat/blocked. Always know your regime at a glance.
Settings are fully documented — every input includes a tooltip explaining exactly what it does, what the defaults mean, and how to tune it.
Past performance is not indicative of future results. Always backtest and paper trade before deploying any strategy with real capital.
The Xiznit Scalper is a high-probability intraday scalping strategy designed for futures markets, built around adaptive regime filtering, multi-mode signal generation, and session-aware trade management. It is engineered to only fire entries during favorable market conditions — filtering out flat, choppy, or low-conviction environments entirely.
Efficiency Ratio Regime Filter
At the core of the strategy is an Efficiency Ratio (ER) engine that classifies market conditions in real time into three regimes:
Trending (Grade A) — Strong directional efficiency. All signal modes active.
Mild Ranging (Grade B) — Moderate structure present. Mean-reversion and structure-based modes active.
Flat / Blocked — No directional efficiency detected. All entries suppressed.
Every trade is graded and labeled directly on the chart, so you always know the market context behind each signal.
Four Selectable Signal Modes
Choose the entry logic that fits your style and market conditions:
EMA Cross — Fast/slow EMA crossover with trending regime confirmation. Clean, reactive, trend-following entries.
VWAP Deviation — Mean-reversion entries when price stretches beyond a configurable threshold from the session VWAP. Works in both trending and mild ranging regimes.
Heikin Ashi + RSI — Two consecutive Heikin Ashi candles in the same direction confirmed by an RSI threshold. Filters neutral-zone signals automatically.
Price Structure — Zero-lag candle-based Higher High / Higher Low (long) and Lower High / Lower Low (short) detection. No pivot lag — signals fire on the current bar.
Session-Based Trade Management
Trading is divided into three independent sessions — Asia, London, and New York — each with its own enable toggle, configurable time boundaries, and maximum trade counter that resets at each session open. A global cooldown bars setting prevents signal clustering within any single move.
Five Independent Entry Filters
Each filter can be toggled on or off independently and works across all four signal modes:
Volume Surge — Requires current bar volume to exceed its moving average by a configurable multiplier. Eliminates entries on thin, unconvincing tape.
ADX Strength — Gates entries on minimum ADX value. Confirms trend momentum strength independent of direction, complementing the ER filter.
HTF Trend Alignment — Restricts longs to above a higher timeframe EMA and shorts to below it. Timeframe and EMA length are fully user-configurable. Uses confirmed closed bars — no repainting.
VWAP Bias — Longs above session VWAP only, shorts below only. Automatically disabled when VWAP Deviation signal mode is active to prevent conflicting logic.
ROC Momentum — Requires positive Rate of Change for longs and negative for shorts. Ensures entries align with recent directional momentum.
ATR-Based Stop Loss and Take Profit
Stops and targets adapt dynamically to current market volatility. Stop loss is placed at entry ± (ATR × multiplier). Take profit is calculated as a configurable R:R ratio of the stop distance. Both are set at entry and do not move.
Automation Ready
The strategy includes fully configurable JSON alert payloads for entry and exit events, compatible with webhook-based automation platforms. Use {{strategy.order.alert_message}} in the TradingView alert message field.
Visual Feedback
Trade grade labels — A (bright green) or B (dark green) float above/below each entry candle with the signal mode that triggered it.
ER regime background — Teal for trending, yellow for mild ranging, gray for flat/blocked. Always know your regime at a glance.
Settings are fully documented — every input includes a tooltip explaining exactly what it does, what the defaults mean, and how to tune it.
Past performance is not indicative of future results. Always backtest and paper trade before deploying any strategy with real capital.
Скрипт с открытым кодом
В истинном духе TradingView, создатель этого скрипта сделал его открытым исходным кодом, чтобы трейдеры могли проверить и убедиться в его функциональности. Браво автору! Вы можете использовать его бесплатно, но помните, что перепубликация кода подчиняется нашим Правилам поведения.
⚡ Xiznit Trading — self-hosted futures automation, no cloud, no shared API keys.
🔗 Invite-only script access: whop.com/xiznit-trading-bot/xiznit-super-scalper/
🌐 Bot & Copier: xiznit-bot.com
Tested honestly. Built to last.
🔗 Invite-only script access: whop.com/xiznit-trading-bot/xiznit-super-scalper/
🌐 Bot & Copier: xiznit-bot.com
Tested honestly. Built to last.
Отказ от ответственности
Информация и публикации не предназначены для предоставления и не являются финансовыми, инвестиционными, торговыми или другими видами советов или рекомендаций, предоставленных или одобренных TradingView. Подробнее читайте в Условиях использования.
Скрипт с открытым кодом
В истинном духе TradingView, создатель этого скрипта сделал его открытым исходным кодом, чтобы трейдеры могли проверить и убедиться в его функциональности. Браво автору! Вы можете использовать его бесплатно, но помните, что перепубликация кода подчиняется нашим Правилам поведения.
⚡ Xiznit Trading — self-hosted futures automation, no cloud, no shared API keys.
🔗 Invite-only script access: whop.com/xiznit-trading-bot/xiznit-super-scalper/
🌐 Bot & Copier: xiznit-bot.com
Tested honestly. Built to last.
🔗 Invite-only script access: whop.com/xiznit-trading-bot/xiznit-super-scalper/
🌐 Bot & Copier: xiznit-bot.com
Tested honestly. Built to last.
Отказ от ответственности
Информация и публикации не предназначены для предоставления и не являются финансовыми, инвестиционными, торговыми или другими видами советов или рекомендаций, предоставленных или одобренных TradingView. Подробнее читайте в Условиях использования.