OPEN-SOURCE SCRIPT
ที่อัปเดต: Momentum Pullback Continuation [AGPro Series]
Momentum Pullback Continuation [AGPro Series]
🧠 Core Idea
Is a momentum pullback resetting cleanly for continuation, or is the move losing its execution quality?
📌 Overview / What it does
Momentum Pullback Continuation [AGPro Series] is a chart-first continuation planner built for traders who review momentum-driven trends after a controlled pullback.
The script maps a momentum reset pocket, continuation trigger line, invalidation rail, target-room corridor, state labels, alerts, and a clean AGPro planning panel. It converts trend support, momentum slope, pullback depth, close recovery, volume behavior, and target room into a 0-100 Continuation Score.
The default publication preset is 1H-focused. Higher timeframes can be tested from the inputs, but the strongest intended use case is hourly momentum pullback review.
It does not predict price, automate entries, or turn every trend pullback into a signal. It is a structured decision tool for evaluating whether the current momentum reset deserves closer review.
🎯 Purpose & Design Philosophy
This script was built to fill the gap between basic momentum readings and practical continuation planning.
Many traders can see that momentum exists, but the harder question is whether the pullback is resetting in a controlled way or damaging the continuation structure. This planner focuses on that decision layer.
The design supports a disciplined workflow: identify the active momentum side, inspect the reset pocket, evaluate the score, locate the invalidation rail, compare target room, and read the next-action state.
⚡ Why This Script Is Different
Most tools focus on momentum oscillators, moving-average direction, divergence events, or generic continuation labels.
This script does NOT clone Hidden Divergence Continuation Zones, Trend Continuation Quality, Structural Momentum Oscillator, ROC Momentum Shift Map, or a generic pullback signal map.
Instead, it treats the pullback as a planning event. The main output is not a buy/sell marker. It is a momentum reset decision state with score, risk edge, target-room context, and action guidance.
⚙️ Methodology
1. Context Detection
The script identifies bullish or bearish momentum context using an EMA stack, normalized trend slope, and smoothed rate-of-change pressure.
2. Reference Mapping
It builds a concept-native Momentum Reset Pocket around the active trend support area, then maps a continuation trigger line, invalidation rail, and target-room guide.
3. Reaction Evaluation
The score model evaluates momentum slope, pullback depth, trend support, close recovery, volume behavior, and available target room.
4. Visual Output
The chart shows the reset pocket, target-room corridor, trigger and risk guides, compact event labels, sparse context labels, alerts, and a premium AGPro panel.
🗺️ How to Read the Chart
Reset Pocket = the area where a momentum pullback is expected to stabilize before continuation can be reviewed.
Trigger Line = the fast continuation reference that price needs to recover after the reset.
Invalidation Rail = the planning line where the active reset context is considered lost.
Target-Room Corridor = the forward planning area between current price and the target-room guide.
Labels = RESET, WATCH, READY, WEAK, and INVALID attention markers.
Colors = teal marks bullish continuation context, pink marks bearish continuation context, amber marks weak or caution states, indigo marks watch/target-room context, and red marks invalidation.
Panel = summarizes Momentum State, Pullback Quality, Continuation Score, Risk Edge, and Action.
🚦 Signals & States
• RESET → price has interacted with the momentum reset pocket.
• WATCH → the reset is developing, but recovery or score quality is not complete.
• READY → momentum, pullback depth, recovery, volume context, and target room align strongly enough for structured review.
• WEAK → the pullback is too deep, low quality, or not recovering well enough.
• INVALID → price has crossed the invalidation rail and the active reset context should be rebuilt.
🔔 Alerts Logic
Alerts trigger when READY, WATCH, WEAK RESET, or INVALID states appear.
Each alert is an attention marker tied to the rule-based state engine. Alerts are not trade instructions and do not guarantee that continuation will occur.
🧩 Confluence Logic
The continuation context becomes stronger when trend support, positive momentum slope, controlled pullback depth, clean close recovery, acceptable volume behavior, and target-room availability align.
The script intentionally requires multiple conditions instead of labeling every pullback inside a trend as meaningful.
📊 When to Use
• Directional markets with visible momentum pressure
• 1H charts and nearby intraday momentum review
• Trend continuation review workflows
• Pullbacks after a clear momentum impulse
• Situations where risk edge and target room matter before acting
• Markets where volume and close behavior are readable enough to support context
⚠️ When NOT to Use
• Low-liquidity symbols with unreliable candles or volume
• Extremely choppy markets with frequent trend-side flips
• News-driven volatility where reset structure changes too quickly
• Very flat markets where momentum pressure is absent
• Instruments where the active pullback is far beyond the mapped risk edge
🎛️ Key Inputs
• Continuation Side → selects Auto, Bullish Only, or Bearish Only evaluation.
• Timeframe Profile → keeps the default script behavior focused on 1H charts, with optional broader intraday or all-timeframe testing.
• Sensitivity → adjusts how strict the momentum reset model is.
• EMA settings → define trigger, reset, and support references.
• Momentum ROC settings → control the internal momentum pressure reading.
• Reset Pocket Width → changes how wide the reset area is around trend support.
• READY / WATCH Score → sets state thresholds.
• Visual settings → control zones, guide lines, labels, panel theme, panel location, and font sizes.
🖥️ Interface & Visual Design
The interface is designed to stay chart-first and practical.
The reset pocket and target-room corridor provide the main visual planning structure. Labels are compact and spaced with cooldown controls. The AGPro panel uses a single merged blue header row and focuses only on the core decision fields.
🧪 Practical Usage Workflow
1. Read the panel Momentum State.
2. Check whether price is interacting with the Momentum Reset Pocket.
3. Compare Pullback Quality and Continuation Score.
4. Locate the Risk Edge and Target-Room Corridor.
5. Use the Action row to decide whether the context is READY, still WATCH, weak, invalid, or only worth scanning.
🔍 Interpretation Guidelines
Think of the script as a continuation readiness map, not a command system.
A higher score means the active momentum pullback matches the script's internal definition of cleaner continuation structure. A lower score means one or more components are missing, such as trend support, recovery quality, volume context, or target room.
The invalidation rail is a planning boundary for the active context. It is not a guaranteed stop level and should not replace the user's own risk process.
🚫 What This Script Is NOT
This script is not a prediction engine.
This script is not financial advice.
This script is not an auto-trading system.
This script does not provide guaranteed signals.
This script does not replace independent confirmation, position sizing, or risk management.
⚠️ Limitations & Transparency
Momentum continuation behavior changes across symbols, sessions, and timeframes.
The default 1H Focus profile intentionally suppresses active labels, zones, and alerts outside the intended hourly review window.
Low-liquidity markets can distort volume behavior and reset quality.
High volatility can widen risk edges and reduce target-room clarity.
Sideways conditions can create repeated resets without clean continuation.
No rule-based script can fully account for sudden news, spread changes, slippage, or discretionary execution constraints.
🧠 Market Context Notes
Momentum pullbacks are often more useful when the broader trend remains intact, the pullback is controlled rather than impulsive against trend, and the recovery candle shows clear close quality.
The best reads usually come from alignment between structure, momentum, volume, volatility, and clean forward room.
🧾 Use Case Examples
When price pulls into the reset pocket during bullish momentum and then recovers the trigger line with a stronger score, the script can mark READY for continuation review.
When price enters the pocket but momentum slope fades and pullback depth becomes excessive, the script can mark WEAK RESET.
When price crosses the invalidation rail, the active reset context is treated as lost and should be rebuilt.
🧱 System Philosophy
AGPro tools are built around structured interpretation.
The goal is not to create more chart noise. The goal is to turn visible market behavior into a cleaner decision framework: context, quality, risk, target room, and next action.
🔐 Non-Promise Statement
No script can provide certainty.
No score guarantees continuation.
The output should be interpreted as structured context, not as a promise of future price movement.
📉 Risk Disclosure
Trading involves risk.
Users are responsible for their own analysis, confirmation, position sizing, and decisions.
This script is for educational and analytical use only and does not provide financial advice.
📚 Educational Note
Use the planner to study how momentum resets behave across different symbols and timeframes. Over time, compare READY, WATCH, WEAK RESET, and INVALID states to understand which environments produce cleaner continuation structure.
🧠 Core Idea
Is a momentum pullback resetting cleanly for continuation, or is the move losing its execution quality?
📌 Overview / What it does
Momentum Pullback Continuation [AGPro Series] is a chart-first continuation planner built for traders who review momentum-driven trends after a controlled pullback.
The script maps a momentum reset pocket, continuation trigger line, invalidation rail, target-room corridor, state labels, alerts, and a clean AGPro planning panel. It converts trend support, momentum slope, pullback depth, close recovery, volume behavior, and target room into a 0-100 Continuation Score.
The default publication preset is 1H-focused. Higher timeframes can be tested from the inputs, but the strongest intended use case is hourly momentum pullback review.
It does not predict price, automate entries, or turn every trend pullback into a signal. It is a structured decision tool for evaluating whether the current momentum reset deserves closer review.
🎯 Purpose & Design Philosophy
This script was built to fill the gap between basic momentum readings and practical continuation planning.
Many traders can see that momentum exists, but the harder question is whether the pullback is resetting in a controlled way or damaging the continuation structure. This planner focuses on that decision layer.
The design supports a disciplined workflow: identify the active momentum side, inspect the reset pocket, evaluate the score, locate the invalidation rail, compare target room, and read the next-action state.
⚡ Why This Script Is Different
Most tools focus on momentum oscillators, moving-average direction, divergence events, or generic continuation labels.
This script does NOT clone Hidden Divergence Continuation Zones, Trend Continuation Quality, Structural Momentum Oscillator, ROC Momentum Shift Map, or a generic pullback signal map.
Instead, it treats the pullback as a planning event. The main output is not a buy/sell marker. It is a momentum reset decision state with score, risk edge, target-room context, and action guidance.
⚙️ Methodology
1. Context Detection
The script identifies bullish or bearish momentum context using an EMA stack, normalized trend slope, and smoothed rate-of-change pressure.
2. Reference Mapping
It builds a concept-native Momentum Reset Pocket around the active trend support area, then maps a continuation trigger line, invalidation rail, and target-room guide.
3. Reaction Evaluation
The score model evaluates momentum slope, pullback depth, trend support, close recovery, volume behavior, and available target room.
4. Visual Output
The chart shows the reset pocket, target-room corridor, trigger and risk guides, compact event labels, sparse context labels, alerts, and a premium AGPro panel.
🗺️ How to Read the Chart
Reset Pocket = the area where a momentum pullback is expected to stabilize before continuation can be reviewed.
Trigger Line = the fast continuation reference that price needs to recover after the reset.
Invalidation Rail = the planning line where the active reset context is considered lost.
Target-Room Corridor = the forward planning area between current price and the target-room guide.
Labels = RESET, WATCH, READY, WEAK, and INVALID attention markers.
Colors = teal marks bullish continuation context, pink marks bearish continuation context, amber marks weak or caution states, indigo marks watch/target-room context, and red marks invalidation.
Panel = summarizes Momentum State, Pullback Quality, Continuation Score, Risk Edge, and Action.
🚦 Signals & States
• RESET → price has interacted with the momentum reset pocket.
• WATCH → the reset is developing, but recovery or score quality is not complete.
• READY → momentum, pullback depth, recovery, volume context, and target room align strongly enough for structured review.
• WEAK → the pullback is too deep, low quality, or not recovering well enough.
• INVALID → price has crossed the invalidation rail and the active reset context should be rebuilt.
🔔 Alerts Logic
Alerts trigger when READY, WATCH, WEAK RESET, or INVALID states appear.
Each alert is an attention marker tied to the rule-based state engine. Alerts are not trade instructions and do not guarantee that continuation will occur.
🧩 Confluence Logic
The continuation context becomes stronger when trend support, positive momentum slope, controlled pullback depth, clean close recovery, acceptable volume behavior, and target-room availability align.
The script intentionally requires multiple conditions instead of labeling every pullback inside a trend as meaningful.
📊 When to Use
• Directional markets with visible momentum pressure
• 1H charts and nearby intraday momentum review
• Trend continuation review workflows
• Pullbacks after a clear momentum impulse
• Situations where risk edge and target room matter before acting
• Markets where volume and close behavior are readable enough to support context
⚠️ When NOT to Use
• Low-liquidity symbols with unreliable candles or volume
• Extremely choppy markets with frequent trend-side flips
• News-driven volatility where reset structure changes too quickly
• Very flat markets where momentum pressure is absent
• Instruments where the active pullback is far beyond the mapped risk edge
🎛️ Key Inputs
• Continuation Side → selects Auto, Bullish Only, or Bearish Only evaluation.
• Timeframe Profile → keeps the default script behavior focused on 1H charts, with optional broader intraday or all-timeframe testing.
• Sensitivity → adjusts how strict the momentum reset model is.
• EMA settings → define trigger, reset, and support references.
• Momentum ROC settings → control the internal momentum pressure reading.
• Reset Pocket Width → changes how wide the reset area is around trend support.
• READY / WATCH Score → sets state thresholds.
• Visual settings → control zones, guide lines, labels, panel theme, panel location, and font sizes.
🖥️ Interface & Visual Design
The interface is designed to stay chart-first and practical.
The reset pocket and target-room corridor provide the main visual planning structure. Labels are compact and spaced with cooldown controls. The AGPro panel uses a single merged blue header row and focuses only on the core decision fields.
🧪 Practical Usage Workflow
1. Read the panel Momentum State.
2. Check whether price is interacting with the Momentum Reset Pocket.
3. Compare Pullback Quality and Continuation Score.
4. Locate the Risk Edge and Target-Room Corridor.
5. Use the Action row to decide whether the context is READY, still WATCH, weak, invalid, or only worth scanning.
🔍 Interpretation Guidelines
Think of the script as a continuation readiness map, not a command system.
A higher score means the active momentum pullback matches the script's internal definition of cleaner continuation structure. A lower score means one or more components are missing, such as trend support, recovery quality, volume context, or target room.
The invalidation rail is a planning boundary for the active context. It is not a guaranteed stop level and should not replace the user's own risk process.
🚫 What This Script Is NOT
This script is not a prediction engine.
This script is not financial advice.
This script is not an auto-trading system.
This script does not provide guaranteed signals.
This script does not replace independent confirmation, position sizing, or risk management.
⚠️ Limitations & Transparency
Momentum continuation behavior changes across symbols, sessions, and timeframes.
The default 1H Focus profile intentionally suppresses active labels, zones, and alerts outside the intended hourly review window.
Low-liquidity markets can distort volume behavior and reset quality.
High volatility can widen risk edges and reduce target-room clarity.
Sideways conditions can create repeated resets without clean continuation.
No rule-based script can fully account for sudden news, spread changes, slippage, or discretionary execution constraints.
🧠 Market Context Notes
Momentum pullbacks are often more useful when the broader trend remains intact, the pullback is controlled rather than impulsive against trend, and the recovery candle shows clear close quality.
The best reads usually come from alignment between structure, momentum, volume, volatility, and clean forward room.
🧾 Use Case Examples
When price pulls into the reset pocket during bullish momentum and then recovers the trigger line with a stronger score, the script can mark READY for continuation review.
When price enters the pocket but momentum slope fades and pullback depth becomes excessive, the script can mark WEAK RESET.
When price crosses the invalidation rail, the active reset context is treated as lost and should be rebuilt.
🧱 System Philosophy
AGPro tools are built around structured interpretation.
The goal is not to create more chart noise. The goal is to turn visible market behavior into a cleaner decision framework: context, quality, risk, target room, and next action.
🔐 Non-Promise Statement
No script can provide certainty.
No score guarantees continuation.
The output should be interpreted as structured context, not as a promise of future price movement.
📉 Risk Disclosure
Trading involves risk.
Users are responsible for their own analysis, confirmation, position sizing, and decisions.
This script is for educational and analytical use only and does not provide financial advice.
📚 Educational Note
Use the planner to study how momentum resets behave across different symbols and timeframes. Over time, compare READY, WATCH, WEAK RESET, and INVALID states to understand which environments produce cleaner continuation structure.
Release Note
🔧 UPDATE NOTES - V1.3This update focuses on readability, presentation polish, and higher-timeframe screenshot balance.
The core purpose of the script remains unchanged.
This release improves how the existing momentum pullback continuation logic is presented, organized, and interpreted on the chart.
This script continues to function as an analytical and visualization tool.
It does not attempt to predict price direction or provide guaranteed outcomes.
------------------------
What Changed
------------------------
• Reworked zone text into separate centered badges
Reset Pocket and Target Room text now render as dedicated centered badges instead of embedded box text.
• Added Zone Badge Anchor control
Users can adjust where the centered zone badges appear inside projected zones.
• Added Adaptive HTF Projection
Daily, weekly, and monthly charts now use shorter projections by default so higher-timeframe screenshots remain balanced.
• Added Slate theme and Huge font-size support
The panel now supports Elite Dark, Slate, and Clean Light themes, while labels and panel text include a Huge option.
• Added live panel-position refresh
Panel placement now updates cleanly when users change location settings.
------------------------
Visual Improvements
------------------------
• Improved chart readability by separating zone fill from zone text
• Reduced visual weight of projected zones on higher timeframes
• Refined the visual hierarchy of reset pocket, target room, trigger line, risk rail, and panel
• Preserved the original event-label style and momentum continuation workflow
------------------------
Interface & Usability
------------------------
• Optimized panel and label controls for publication screenshots
• Improved zone text readability across dark and light chart layouts
• Added more flexible font-size and panel-theme options
• Enhanced overall user experience without changing the core analytical model
------------------------
Behavior Notes
------------------------
This update does not change the core analytical intent of the script.
Momentum context, reset pocket detection, continuation scoring, invalidation logic, and alerts should be interpreted the same way as before.
The goal is to improve clarity and usability, not to introduce new predictive behavior.
------------------------
Limitations Reminder
------------------------
The script remains a rule-based analytical tool.
Market conditions such as volatility, liquidity, timeframe differences, trend quality, and momentum regime changes may affect how labels and states appear.
Outputs should always be interpreted within broader market context.
------------------------
Risk Reminder
------------------------
This script is for educational and analytical purposes only.
It does not provide financial advice or guaranteed trading outcomes.
Users remain responsible for their own decisions.
Release Note
🔧 UPDATE NOTES - v1.4This update adds a continuation rate proof to the planner.
The core purpose of the script remains unchanged.
This release keeps the same momentum context, reset pocket, continuation trigger, invalidation
rail and target-room logic, and adds a historical track record of how often confirmed
continuation triggers reached target room before invalidation.
This script continues to function as an analytical and visualization tool.
It does not attempt to predict price direction or provide guaranteed outcomes.
------------------------
What Changed
------------------------
- Continuation Rate proof layer
The panel now reports how often a confirmed continuation trigger reached its target-room guide
before crossing the invalidation rail, shown with the sample count for transparency.
- Panel hierarchy
Added the Cont Rate row directly under Continuation Score, so the score and its track record
sit together.
- Honest follow-through measurement
Each continuation trigger is checked against its own target and invalidation rail, and
ambiguous bars resolve conservatively, so the rate stays an honest measure.
------------------------
Visual Improvements
------------------------
- Kept the momentum reset pocket, target-room corridor and centered badges unchanged
- Preserved the trigger, invalidation and target guide lines
- Maintained the controlled, screenshot-friendly label density
- Left the clean publication layout intact
------------------------
Interface & Usability
------------------------
- Added a Cont Rate row for an at-a-glance continuation track record
- Kept the existing momentum, pullback, score, risk and action hierarchy
- Adjusted the panel to keep every row decision-relevant
- Enhanced overall user experience without changing the core scoring logic
------------------------
Behavior Notes
------------------------
This update does not change the core analytical logic of the script.
The momentum context, reset states and continuation score are unchanged. The Cont Rate is a
separate historical track-record layer and does not alter how continuation is scored.
------------------------
Limitations Reminder
------------------------
The script remains a rule-based analytical tool.
Market conditions such as volatility, liquidity, and timeframe differences may affect how
resets, continuation triggers and the rate appear.
Outputs should always be interpreted within broader market context.
------------------------
Risk Reminder
------------------------
This script is for educational and analytical purposes only.
It does not provide financial advice or guaranteed trading outcomes.
Users remain responsible for their own decisions.
สคริปต์โอเพนซอร์ซ
ด้วยเจตนารมณ์หลักของ TradingView ผู้สร้างสคริปต์นี้ได้ทำให้เป็นโอเพนซอร์ส เพื่อให้เทรดเดอร์สามารถตรวจสอบและยืนยันฟังก์ชันการทำงานของมันได้ ขอชื่นชมผู้เขียน! แม้ว่าคุณจะใช้งานได้ฟรี แต่โปรดจำไว้ว่าการเผยแพร่โค้ดซ้ำจะต้องเป็นไปตาม กฎระเบียบการใช้งาน ของเรา
Public-free scripts + invite-only AGPro workflows for market analysis, liquidity context, risk planning and execution review.
Rules-based. No hype. No guesswork.
Library & access: agprolabs.com/
Telegram: t.me/agprolabs
Rules-based. No hype. No guesswork.
Library & access: agprolabs.com/
Telegram: t.me/agprolabs
คำจำกัดสิทธิ์ความรับผิดชอบ
ข้อมูลและบทความไม่ได้มีวัตถุประสงค์เพื่อก่อให้เกิดกิจกรรมทางการเงิน, การลงทุน, การซื้อขาย, ข้อเสนอแนะ หรือคำแนะนำประเภทอื่น ๆ ที่ให้หรือรับรองโดย TradingView อ่านเพิ่มเติมใน ข้อกำหนดการใช้งาน
สคริปต์โอเพนซอร์ซ
ด้วยเจตนารมณ์หลักของ TradingView ผู้สร้างสคริปต์นี้ได้ทำให้เป็นโอเพนซอร์ส เพื่อให้เทรดเดอร์สามารถตรวจสอบและยืนยันฟังก์ชันการทำงานของมันได้ ขอชื่นชมผู้เขียน! แม้ว่าคุณจะใช้งานได้ฟรี แต่โปรดจำไว้ว่าการเผยแพร่โค้ดซ้ำจะต้องเป็นไปตาม กฎระเบียบการใช้งาน ของเรา
Public-free scripts + invite-only AGPro workflows for market analysis, liquidity context, risk planning and execution review.
Rules-based. No hype. No guesswork.
Library & access: agprolabs.com/
Telegram: t.me/agprolabs
Rules-based. No hype. No guesswork.
Library & access: agprolabs.com/
Telegram: t.me/agprolabs
คำจำกัดสิทธิ์ความรับผิดชอบ
ข้อมูลและบทความไม่ได้มีวัตถุประสงค์เพื่อก่อให้เกิดกิจกรรมทางการเงิน, การลงทุน, การซื้อขาย, ข้อเสนอแนะ หรือคำแนะนำประเภทอื่น ๆ ที่ให้หรือรับรองโดย TradingView อ่านเพิ่มเติมใน ข้อกำหนดการใช้งาน