Compression Pressure Map [AGPro Series]Compression Pressure Map
⚡ Overview
────────────────────────────────────────
Compression Pressure Map is a structural context tool that measures how tightly price is compressing against the nearest pivot-based level, and evaluates two behavioral scenarios in parallel: breakout anticipation and reversal watch. The output is a visual map of where pressure is accumulating — rendered as an evolving pressure zone that moves through BUILDING, ARMED and READY states.
This is not a signal engine, not a forecast, and not a trading strategy. It is a visualization layer that answers a single question: where is compression building around the active level, and in which direction is that pressure leaning.
🧭 Unique Edge
────────────────────────────────────────
Most compression indicators reduce behavior to a single direction. CPM separates compression into two parallel scoring engines that run on the same structural core:
🔹 Breakout Anticipation — pressure building for a directional break through the level
🔹 Reversal Watch — pressure building for a rejection at the level
In Auto mode the dominant scenario is rendered on the chart (cleaner visual), while the panel shows both scores side by side for transparency. Power users can lock the engine to a single mode. The active level is stabilized with a clustered pivot refinement and a drift-control lock, so the displayed level stays consistent instead of jumping on every new pivot. A compression gate keeps the pressure score aligned with the compression core: when compression is weak, pressure cannot escalate into high states.
🧪 Methodology
────────────────────────────────────────
The pressure score is a weighted composite of six structural components, measured on the active scenario:
🔹 Range compression (short-window range vs long-window range)
🔹 ATR compression (short-window ATR vs long-window ATR)
🔹 Body tightness (average body size relative to average range)
🔹 Quiet-bar persistence (how many recent bars qualify as calm)
🔹 Proximity to the active level (normalized by ATR)
🔹 Directional posture (slope, close position in bar)
Reversal scoring adds wick-rejection weight at the active level (average lower-wick size for bull reversals, upper-wick size for bear reversals). Breakout scoring adds approach slope weight toward the active level. A shared EMA smoothing step produces calmer state transitions. A dominance margin and cooldown prevent rapid scenario flipping. The final score is driven through a BUILDING → ARMED → READY state machine with hysteresis on the zone visibility to avoid flicker.
🎯 Signals & Alerts
────────────────────────────────────────
The state machine produces four transition alerts plus two pace alerts:
🔹 Pressure Armed Near Level — score crosses the armed threshold with an active scenario
🔹 Ready Zone Reached — score crosses the ready threshold with an active scenario
🔹 Armed Bullish / Bearish Scenario — directional armed transitions
🔹 Ready Bullish / Bearish Scenario — directional ready transitions
🔹 Pressure Rising — score is climbing while the zone is live
🔹 Pressure Released — the active scenario resolves (through the level or by decay)
On the chart, state transitions are marked with discrete A and R markers on the active side. A score label near price always shows the current pressure value, bias and state for quick reading without opening the panel.
⚙️ Key Inputs
────────────────────────────────────────
🔹 Engine Mode — Auto, Breakout Anticipation, or Reversal Watch
🔹 Compression Length — main lookback for range, ATR and body tightening
🔹 Trigger Distance (ATR) — how close price must be to a level to start evaluating
🔹 Hold Distance (ATR) — how far price can drift before the active context is cleared
🔹 Pivot Left/Right and Cluster Tolerance — pivot strength and blending behavior
🔹 Compression Gate and Gate Threshold — compression-first discipline control
🔹 Armed / Ready / Zone On / Zone Off Thresholds — state machine calibration
🔹 Full visual controls — zone width, band extend, line width, label size, panel position and font
All defaults are tuned for mid-volatility crypto pairs on 1H and 4H timeframes, but the engine adapts across symbols and timeframes through its ATR-normalized distance logic.
📘 How to Use
────────────────────────────────────────
🔹 Open the indicator in Auto mode and observe which scenario the panel highlights
🔹 Wait for the pressure zone to appear on the chart (BUILD → LIVE transition)
🔹 Read the state: BUILDING means the setup is forming, ARMED means the setup is mature, READY means compression and proximity are both at peak
🔹 Cross-reference with your own structural read — CPM describes the compression landscape, the decision is yours
🔹 If you prefer one behavioral lens only, lock the engine to Breakout Anticipation or Reversal Watch
🔹 Use the Compression Gate to enforce compression-first discipline — when compression is weak, the pressure score stays in WATCH
🔹 The tool is timeframe-agnostic; try it on 15m, 1H, 4H and 1D to see how compression contexts nest
CPM is designed to sit alongside your strategy, not replace it. It maps the compression field; you read the context.
⚠️ Limitations & Transparency
────────────────────────────────────────
🔹 CPM is a context visualization tool, not a signal generator — it does not issue buy or sell calls
🔹 The pressure score is a structural measurement, not a probability estimate
🔹 State transitions describe the compression field at the moment they print; they do not imply what happens next
🔹 Active level refinement is intentionally conservative — the level may feel slower to update than raw pivots, by design
🔹 Very high volatility regimes may keep the compression score low for extended periods, which is the intended behavior
🔹 The tool is deterministic on closed bars; intrabar values are provisional until bar close
CPM is released as Public, Open-source under MPL 2.0. The source is fully readable and auditable.
🛡️ Risk Disclosure
────────────────────────────────────────
This indicator is published for educational and analytical purposes only. It is not financial advice, not a trading strategy, and not a recommendation to buy or sell any asset. Past behavior of any level or pressure state does not predict future behavior. Markets carry risk of loss; users are solely responsible for their own decisions and risk management. Always do your own research and consider consulting a qualified professional before making trading or investment decisions. อินดิเคเตอร์
Level Survival Map [AGPro Series]Level Survival Map
🔹 Overview
Level Survival Map is a premium support and resistance framework that does not just draw lines on the chart. Every detected level carries a live Survival Score between 0 and 100 that answers one simple question: how well is this level still defending itself right now. The map highlights a single Active Level with an interaction zone and a forward projection ribbon, while nearby weaker levels fade, so traders always know which level actually matters for the current decision.
🔸 Unique Edge
Most support and resistance tools either show static pivots or basic break or retest events. Level Survival Map goes further by measuring the quality of every interaction and turning it into a single composite health score per level. Instead of being left with a wall of equally important lines, the trader sees a ranked structural battlefield with one clearly identified Active Level, a visible interaction zone and a projection ribbon for planning. The Damage State readout, the Fresh and Eroded state semantics, the automatic flip from broken support to new resistance and the cluster fade for crowded weaker levels are designed to work together as one premium, low-noise workflow.
🔹 Methodology
Pivot detection builds the raw candidate levels from swing highs and swing lows using the standard pivot window. A merge filter removes duplicates that sit within a configurable ATR distance of an existing same-type level. Each active level then accumulates four independent components over time. Close Respect rewards closes that respect the level side, for example closes above a support. Penetration Damage penalises wicks and bodies that pierce through the level zone. Reaction Quality rewards strong rejection wicks and bodies moving away from the level after a test. Test Fatigue penalises repeated tests because levels tend to weaken with each new hit. These four components are weighted and combined into a single Survival Score, then clamped between 0 and 100. A structural break caps the score at 35, heavy damage across multiple tests caps it at 28, and a confirmed sequence of opposite-side closes flips the level type while resetting its history. The Active Level is chosen as the closest same-side level to price so that the focus always follows the real decision point.
🔸 Signals and Alerts
The visual output itself is the primary signal. Line colour and thickness communicate level strength at a glance. A focused Active Level is drawn with an interaction zone, a darker core band and a forward projection ribbon so that traders can see the exact price band where reaction is most likely, and how far into the future that band is expected to remain relevant. Labels carry the Survival Score directly, so the ranking of levels is always visible without opening any settings. Broken levels switch to a dashed style and faded colour, and once enough opposite-side closes accumulate they flip type automatically, giving a clear visual signature of structural change.
🔹 Key Inputs
Pivot Left Bars and Pivot Right Bars control how strict the swing detection is. Max Active Levels caps how many concurrent levels are tracked. Level Merge Distance and Interaction Zone are expressed in ATR units so the logic adapts across timeframes and instruments. Scoring weights for Close Respect, Penetration Damage, Reaction Quality and Test Fatigue can be tuned independently, together with the fatigue penalty per extra test and the number of closes required to confirm a flip. Visual inputs cover panel position, label size, line width, focus emphasis, non-focus transparency, cluster fade, focus zone width and projection ribbon length and thickness. A Clean Map Mode is provided for screenshot and publishing workflows where only the Active Level and the nearest valid support and resistance are labelled.
🔸 How to Use
Read the map top down. First, look at the summary panel for the Active Level, its Survival Score, Test Count and Damage State. A Fresh or Strong Active Level defending its side is a high-quality decision point. A Fragile or Eroded Active Level with a Severe Damage State is a warning that the next level below or above is likely to take over. Use the projection ribbon as a planning band for reaction rather than a mechanical entry. Use the ranked non-Active labels to understand where price is likely to travel if the Active Level gives way. The tool is designed to be used as a visual framework, in combination with the trader own execution method, trend context and risk management.
🔹 Limitations and Transparency
This indicator is a visual analytical framework, not a strategy, not a signal service and not financial advice. Survival Score, Damage State and flip logic are deterministic functions of price action and ATR, so different markets and timeframes will produce different characteristic score ranges. Pivot based detection is inherently lagging by the Pivot Right Bars window, which is the expected behaviour of any structural tool and not a defect. The Active Level projection ribbon is a visual planning aid, not a forecast. Past level behaviour does not guarantee future behaviour.
🔸 Risk Disclosure
Trading involves substantial risk and is not suitable for every investor. This script is published for educational and analytical purposes only. Users are solely responsible for their own trading decisions, position sizing and risk management. Always test any tool on your own instruments and timeframes before using it in a live environment. อินดิเคเตอร์
Session Reaction Map [AGPro Series]Session Reaction Map
🔷 OVERVIEW
Session Reaction Map is a premium intraday study that maps how price reacts to the most important daily and weekly reference levels right at the opens of the Asia, London and New York sessions. Each session open is evaluated inside a fixed measurement window, and the resulting reaction is broken down into four dimensions: dominant move, close follow-through, wick rejection and counter-move penalty. The output is a single 0-100 reaction score that is then translated into tier-coded labels, premium reaction zones, an active reference band and a compact status panel, so you can instantly read what happened at each session open without scrolling through candles.
The indicator is designed for discretionary traders, systematic traders, SMC and price action practitioners who want a clean, consistent and quantitative way to read session open behaviour around PDH, PDL, PDM, Daily Open and Weekly Open. Reactions are drawn as directional zones (bull zones above the reference and bear zones below), with up or down pointing labels centered on the reaction, so orientation is always unambiguous.
🧭 UNIQUE EDGE
Most session open tools only mark time windows or highlight levels. Session Reaction Map goes further and quantifies the quality of the reaction itself. Four independent dimensions are measured against a fixed ATR-normalized baseline, and the final score determines not only whether a label is shown but also how prominent it is. Elite scores (80+) get the strongest visuals; strong scores (70-79) get a slightly softer treatment; watch scores (55-69) are coded as caution; anything below 55 is filtered out by default.
This separation between detection (a session open near a reference) and evaluation (the reaction quality score) is the core edge. It lets you focus only on the best intraday reactions and discard noise automatically, while still being able to audit every component by adjusting the ATR length, touch tolerance, evaluation window and score thresholds.
⚙️ METHODOLOGY
Session detection uses the chosen timezone and three session windows (Asia, London, New York), each with its own editable open range. When a session open occurs, the script checks whether the open price is within an ATR based touch tolerance of any enabled reference level (Previous Day High, Previous Day Low, Previous Day Mid, Daily Open or Weekly Open). If so, a reaction window is engaged on that bar and tracked for a configurable number of bars.
During the reaction window, the live zone, reference band and dashed reference line are updated in real time. When the window completes, the final score is computed as:
• Dominant move score (up to 45 points) - scaled against 1.20 x ATR
• Close follow-through score (up to 30 points) - scaled against 0.90 x ATR
• Wick rejection score (up to 15 points) - scaled against 0.50 x ATR
• Counter-move penalty (up to -20 points) - scaled against 1.00 x ATR
The sum is clamped into the 0-100 range and mapped into four tiers: Elite, Strong, Watch and Weak. The dominant direction of the reaction (up or down) is determined by comparing the upside excursion from the reference to the downside excursion from the reference during the window.
🎯 SIGNALS AND VISUALS
• Reaction zones - rectangular areas connecting the reference level with the reaction extreme, tier-coded by score and bias
• Active reference band - a thin accent band around the current reference level during a live reaction window
• Dashed reference line - marks the exact reference price while the reaction is being measured
• Tier-coded labels - up-pointing labels below bullish reactions and down-pointing labels above bearish reactions, centered on the reaction window
• Session dots - small colored markers that optionally display only on valid events, keeping the chart clean
• Active measurement highlight - an ultra-soft background shade on bars inside a live reaction window
Labels use a ring buffer overlap check, so dense multi-session conditions do not pile labels on top of each other. When two labels would visually conflict, the higher-scored reaction wins.
🛠️ KEY INPUTS
Sessions - enable/disable and edit Asia, London and New York session windows, each with its own color and timezone.
Reference Levels - individually toggle PDH, PDL, PDM, Daily Open and Weekly Open.
Reaction Logic - ATR length, touch tolerance in ATR, evaluation bars, label score filter, minimum label score, overlap reduction (bars and vertical ATR gap).
Visuals - show/hide reference levels, session dots, dots only on valid events, reaction zones, minimum score for zones, zone transparency and extension, live reaction zone, active reference band with its ATR size and transparency, active measurement highlight, level width, label size, label offset in ATR and label background transparency.
Panel - show/hide, position (six anchor points), Dark or Light theme, font size, optional guide row.
All numerical inputs carry professional English tooltips explaining their role, so the script can be tuned for any symbol, timeframe and trading style.
📘 HOW TO USE
1. Apply the script on an intraday timeframe. It is designed for intraday use and will stay passive on daily/higher timeframes.
2. Recommended starting timeframe is 4H for swing intraday context, and 1H for tactical intraday work. Lower timeframes (15m, 30m) work too but may produce dense output.
3. Start with the default settings. Observe which sessions and which reference levels generate the most Elite and Strong reactions on your symbol.
4. Use the panel to monitor the current state: last session, last reference, bias, score, tier, label filter, zone filter and the active reaction status.
5. Treat Elite (80+) and Strong (70-79) reactions as the main signals. Watch tier is informative and Weak tier is generally discarded.
6. Align with your own confluence: higher timeframe bias, structure, orderflow, or whatever your primary framework is. The script does not issue buy or sell calls - it scores reactions, and you decide.
⚠️ LIMITATIONS AND TRANSPARENCY
• This is not a strategy and does not place orders. No backtest statistics are implied.
• Reaction scores are computed after the evaluation window completes, so they are not repainting but are confirmed with a lag equal to the evaluation window size.
• The live reaction zone updates during the window and is finalized when the window closes.
• Session behavior varies significantly by symbol (crypto vs FX vs equities) and by volatility regime. Inputs should be tuned per symbol.
• Daily and Weekly references use standard request.security with barmerge.lookahead_off to avoid look-ahead bias.
• The script is not a forecasting tool. It is a post-event quantification of how price has just reacted to a known reference level.
🛡️ RISK DISCLOSURE
Trading involves substantial risk. Past reactions, patterns, zones or scores do not guarantee future performance. This script is provided for educational and analytical purposes only and is not financial advice. Always combine any tool with your own research, a defined risk plan and proper position sizing. You are solely responsible for your trading decisions. อินดิเคเตอร์
Aura Pivot S/R Matrix [Pineify]Aura Pivot S/R Matrix
This indicator turns confirmed swing pivots into volatility-adaptive support and resistance zones rather than single horizontal lines. The thickness of each zone is derived from a 200-bar ATR snapshot taken at the pivot bar itself — so a level formed during a quiet consolidation gets a narrower zone than one formed during a wide-range expansion, without any manual tuning per instrument. Each zone tracks forward with price until a full close breaks through it, at which point the zone is frozen and labeled as a breakout or breakdown.
Key Features
ATR-scaled zone thickness anchored to the volatility regime at the pivot bar, not the current bar
Forward-extending zones that visually "track" price until broken, then freeze as a historical record
Close-based break detection that filters out wick probes and test-and-reject candles
Per-zone state management via a user-defined type — each zone behaves as an independent object with its own lifecycle
Breakout and breakdown labels printed at the exact bar of confirmation
How It Works
Each zone is built through a three-stage pipeline — pivot confirmation, volatility-scaled construction, and lifecycle tracking.
A swing is detected when a bar's high is higher than the surrounding pivotLen bars on both sides (for resistance), or the low is lower (for support). Because the right-side requires N bars of confirmation, zones appear with a deterministic pivotLen -bar lag and do not repaint once drawn
At the moment a pivot confirms, the script measures the 200-bar ATR as it existed pivotLen bars ago — that is the volatility context at the actual swing bar, not the current bar. The zone is then drawn as a box extending ±(ATR/2) around the pivot price
Each zone is stored in an SRZone user-defined type that bundles its box, midline, label, pivot level, and a boolean broken flag. Two arrays — one for resistance, one for support — hold the active inventory
On every bar, unbroken zones have their right edge extended forward. When the close exceeds the top of a resistance zone (or falls below the bottom of a support zone), the zone stops extending, is marked broken, and a labeled marker is drawn at the break bar
How the Components Work Together
Three design decisions interact to produce the final behavior.
The pivot detection answers where market structure previously turned — these are locations where orders likely clustered and will likely cluster again on retest. The ATR scaling answers how wide the reaction range around that pivot should be, because a pivot formed during a low-volatility session does not represent the same defensive range as one formed during a volatile expansion. Combining the two produces zones that are structurally anchored but volatility-proportional.
The close-based break filter then handles the noise problem. The most common false break is a wick that tags the level, prints a panic candle, and reverses immediately. By requiring a full close beyond the zone, the indicator rewards conviction moves and ignores exploratory probes — the break is registered only when price has committed to the new regime.
Trading Ideas and Insights
Repeated tests of a fresh resistance zone without a closing break frequently precede a sustained reversal. The more times a zone is defended, the more meaningful the eventual breakout becomes
When a resistance zone breaks and then holds as support on retest, that flip is a classic structural shift — an opportunity to align with the new direction using the flipped zone as a clear invalidation level
Support zones broken during strong trending conditions rarely hold on retest. Support broken during ranging conditions often reforms because the market was simply oscillating — context from the broader trend matters
A cluster of multiple pivots at similar prices (three or four zones stacking) marks a confluence area that carries more weight than an isolated swing
Past behavior at these levels does not guarantee future reactions. Treat zones as bias filters rather than standalone signal generators.
Unique Aspects
Most S/R indicators use fixed-distance zones, round numbers, or percentage bands. This one scales zone thickness to a rolling ATR measured at the exact bar of the pivot — so a 2020 level and a 2024 level on the same chart can have very different zone widths depending on the volatility regime that produced them
Zones freeze on break rather than being deleted, preserving a visual history of which structural levels have been tested and lost. This acts as a passive context map for traders reading price action
State is managed through a UDT array rather than a flat set of lines, which makes the extend-until-broken behavior clean and predictable — each zone owns its own break detection logic
How to Use
Add the indicator to any chart and timeframe you actively trade. 1H and 4H are good starting points for swing traders; lower timeframes work but will produce more zones and benefit from a higher pivot lookback value
Identify the nearest active support zone (green) and resistance zone (red) — these are the first levels price is likely to react to
Watch for one of two outcomes: a controlled approach followed by rejection (fade setup), or a decisive close through the zone (breakout setup). The indicator labels the breakout or breakdown automatically
When a level breaks, expect a retest. Retests often offer better reward-to-risk entries than chasing the initial breakout bar itself
Customization
Pivot Lookback Length (default: 15) — Bars required on each side of a swing for confirmation. Lower values (5-10) produce smaller, more frequent zones suitable for scalping. Higher values (20-30) isolate only major structural swings and reduce chart clutter
Zone Width (ATR Multiplier) (default: 1.0) — Scales the ATR-derived zone thickness. Raise to 1.5-2.0 on volatile instruments where zones should absorb normal noise; lower to 0.5 for tighter precision-entry levels
Support / Resistance Color — Visual differentiation between bullish and bearish zones, their midlines, and labels
Zone Transparency (default: 85) — Controls the fill opacity of zone boxes. Values around 80-90 keep price action readable inside the zone
Limitations to Be Aware Of
The pivot confirmation delay equals the lookback length. A 15-bar lookback means the zone is drawn 15 bars after the actual swing high or low. This is fine for levels (they do not repaint) but unsuitable for entries at the exact swing bar
Zones do not automatically merge. When multiple pivots form within an ATR of each other, their zones will overlap on the chart. Increasing the pivot lookback reduces this visual clutter
Break detection uses close , not wicks. A bar can spike well beyond the zone and return inside without triggering a break — by design, but worth remembering on volatile instruments with large intrabar swings
Conclusion
Rather than plotting dozens of static lines, the Aura Pivot S/R Matrix treats each structural pivot as a live object with a volatility-scaled range and a clear lifecycle — active, then broken. The ATR scaling grounds each zone in the volatility context of its own formation, and the close-based break detection emphasizes conviction moves over noise. Most useful as a structural framework for swing and position traders who want to see where the market has been defended, where those defenses have been lost, and how the battleground has evolved across different volatility regimes.
อินดิเคเตอร์
Reaction Efficiency Meter [AGPro Series]Reaction Efficiency Meter
A pure observation lens that scores every pivot-based support and resistance reaction from 0 to 100 and classifies it as WEAK, LIMITED, FAIR, STRONG or EFFICIENT. Designed to answer one specific question on any chart: how well did price actually react when it touched that level? Not a strategy, not a signal generator — a quality meter for S/R reactions.
🔹 Overview
Reaction Efficiency Meter watches pivot-based support and resistance levels and, the moment price touches any of them, opens a fixed reaction window to observe what happens next. At the end of that window the reaction is scored from 0 to 100 using four weighted components — strength, speed, cleanliness, follow-through — and then classified into a five-tier hierarchy. The result is printed directly on the chart as a color-coded label (BULL or BEAR), while a side panel keeps a live summary of the last bullish reaction, last bearish reaction and the currently active event window. The indicator is built as a post-event quality lens for traders who already work with horizontal levels, pivot zones, or structural S/R and want an objective readout of reaction quality instead of a subjective eyeball assessment.
🔸 Unique Edge
Most support and resistance indicators stop at drawing lines or zones. Reaction Efficiency Meter goes one step further and evaluates the reaction itself on a fixed, reproducible scale. Four distinct quality dimensions are blended into a single 0-100 score, and a separate adverse-excursion penalty reduces the score when price violated the level before reacting. The result is a transparent number tied to a five-tier verbal classification (WEAK / LIMITED / FAIR / STRONG / EFFICIENT), which makes reactions directly comparable across symbols and timeframes. There are no repainting signals, no lagging smoothers and no hidden strategy logic — the scoring is purely descriptive and fires only after the reaction window closes on a confirmed bar.
🔹 Methodology
The engine has four clear stages:
1. Level detection. Classic pivot highs and lows are tracked as dynamic resistance and support. Only the most recent N levels per side stay active — older ones are retired, so the chart never clutters.
2. Touch detection. A touch is registered when the bar's range enters a tolerance band around any active level (expressed in ATR units so the logic auto-scales across volatility regimes). A cooldown of N bars between tests on the same level prevents noise from restarting an event too quickly.
3. Event tracking. Once a touch fires, a reaction window of N bars is opened. During that window the script tracks (a) the best favorable excursion in ATR units, (b) the worst adverse excursion in the wrong direction, (c) which bar produced the peak favorable move, (d) the net retained move at window close.
4. Scoring and classification. At window close the four components are combined with a penalty:
• Strength (0-35): best favorable excursion relative to 1.5 ATR reference.
• Speed (0-20): how early the peak favorable bar occurred inside the window.
• Cleanliness (0-20): reduced linearly by adverse excursion.
• Follow-through (0-15): how much of the peak move was retained at window close.
• Adverse penalty (up to -15): applied when price broke through the level.
Final score is clamped 0-100 and mapped to: WEAK (<25), LIMITED (25-44), FAIR (45-64), STRONG (65-79), EFFICIENT (80+).
🔸 Signals & Alerts
The indicator does not emit buy or sell alerts. Its outputs are purely descriptive:
• A color-coded reaction label (BULL or BEAR with score and tier) plotted after each completed window.
• Active zone rectangle and reaction corridor drawn around the touched level while the window is open.
• Touch markers on the bar where a new event begins.
• Live status tag showing BULL WINDOW x/N or BEAR WINDOW x/N during an active event.
• A stateful side panel with Status, Last Bull, Last Bear, Window progress and Mode rows.
All visuals render on confirmed bars only, so the score and tier of a completed reaction do not change afterwards.
🔹 Key Inputs
• Pivot Length — bar distance used to qualify pivot highs and lows.
• Max Active Levels / Side — how many recent resistance and support levels stay active.
• ATR Length — volatility reference for tolerance, corridor depth and scoring.
• Touch Tolerance (ATR) — how close to the level a bar must come to count as a touch.
• Reaction Window Bars — fixed observation length per event.
• Minimum Bars Between Tests — cooldown on the same level.
• Reaction Corridor Depth (ATR) — vertical span of the reaction corridor drawn during the window.
• Display group — toggles for levels, tags, markers, labels, active zone, corridor, panel.
• Theme & Layout — panel theme (Auto / Dark / Light), position, font size, line width and opacity controls.
🔸 How to Use
The indicator is intended as a companion lens, not a standalone system. Typical workflows include:
• Confluence study. Compare reaction scores at different levels on the same chart to see which zones historically produced stronger reactions.
• Bias assessment. Watching whether BULL and BEAR labels on a given timeframe skew toward higher or lower tiers can inform directional bias for discretionary decisions made elsewhere.
• Framework validation. Add it on top of an existing S/R, order block or pivot framework to quantify whether the levels those tools produce actually generate efficient reactions.
• Multi-timeframe scanning. Running the indicator on multiple timeframes shows where strong reactions cluster — often useful for context, not entry timing.
The tool is descriptive and retrospective. It is not designed to replace risk management, structural analysis or the user's own trading plan.
🔹 Limitations & Transparency
• The reaction window is fixed per event. Very fast V-reversals may still register as WEAK if most of the favorable move happens after the window closes; conversely, slow grind reactions may score lower on the Speed component even when the net outcome is good.
• Pivot-based levels are, by definition, confirmed with a lag equal to Pivot Length bars.
• Scores are descriptive — a STRONG tag on a past reaction does not imply that the next test of the same level will also react strongly.
• All scoring uses confirmed-bar logic, so the indicator is non-repainting by design.
🔸 Risk Disclosure
This indicator is provided for educational and analytical purposes only. It is not financial advice, not a trade signal generator, and not a recommendation to buy or sell any instrument. Trading involves substantial risk of loss. Past reactions do not guarantee future reactions. Users are solely responsible for their own trading decisions and risk management. อินดิเคเตอร์
Reference Price Operating Map [AGPro Series]Reference Price Operating Map
🔹 OVERVIEW
Reference Price Operating Map is a focused overlay that consolidates the four most universally watched reference prices — Daily Open, Weekly Open, Monthly Open, and Previous Close — into a single operating map. It tracks how price interacts with each level in real time, attributes control to the reference currently leading price action, groups overlapping references into confluence clusters, and fades distant context so the active map stays clean.
The chart answers one direct question at a glance: which reference is controlling the session right now.
Built for intraday operators, swing traders, and position traders who anchor their bias to session and period opens. Works on any symbol and any intraday or daily timeframe.
🔸 WHAT MAKES IT DIFFERENT
Most open-line indicators simply draw horizontal lines for Daily, Weekly, Monthly, and Previous Close and stop there. This script goes further by adding four layers on top of those lines:
• State tracking — each reference is classified as Untouched, 1st Touch, Tested, Held, Reclaimed, or Rejected, and the state updates bar by bar as price interacts with the level.
• Control attribution — a proximity-weighted scoring system selects one reference as the current "controller" of price action, highlighted with a dominant-row background in the panel and a thicker line on the chart.
• Confluence grouping — when two or more references sit within 0.5 ATR of each other, they collapse into a single cluster label (for example "D-Open + W-Open + PClose") instead of stacking separate labels on top of each other.
• Distance-aware rendering — references far from current price are demoted to a thin gray zone with a dotted line, keeping them visible as structural context without crowding the active map.
The engine also includes a far-aware state machine: references that price has not meaningfully engaged stay in the Untouched state instead of being forced into misleading classifications.
🔷 METHODOLOGY
Reference levels are pulled directly from the higher timeframe open (Daily, Weekly, Monthly) and the previous daily close using lookahead-safe security calls on confirmed bars.
Distance classification uses ATR(14) as a volatility scale. A reference is considered "near" when price is within a configurable ATR multiple and "far" when it exceeds the far-distance threshold. This adapts the map to both low-volatility ranges and high-volatility expansions without manual tuning.
State transitions are driven by a finite state machine with six states. Key transitions:
• Untouched → 1st Touch when price enters the touch zone (default 0.25 ATR) or wicks through it.
• 1st Touch / Tested → Held when price moves cleanly away from the level on the same side.
• 1st Touch / Tested → Reclaimed when price closes on the opposite side (optionally requiring multi-bar confirmation).
• Any engaged state → Rejected when a large wick rebounds from the level with more than 60 percent wick ratio.
• Held / Rejected → Reclaimed on a confirmed cross.
The control score combines proximity (how close price is to the reference relative to ATR) with a state weight (Reclaimed and 1st Touch score highest, Held scores lowest). The reference with the highest score is tagged as controller; if no reference has meaningful engagement the panel reports No Active Control.
🔶 SIGNALS AND ALERTS
Three alert conditions are exposed:
• Reference Touched — fires the first time any reference is touched in its period.
• Reference Reclaimed — fires when any reference transitions into the Reclaimed state.
• Reference Rejected — fires when a large-wick rejection bar is registered at any reference.
On-chart, first-touch diamond markers are placed on recent bars to make period engagement easy to spot in screenshots and reviews. The panel footer reports the current controller and updates in real time.
🔹 KEY INPUTS
Reference Lines — independent toggles for Daily Open, Weekly Open, Monthly Open, and Previous Close.
Display — Show Active References Only (hide untouched references for a cleaner map), Strict Reclaim Confirmation (require multiple confirmation bars for Reclaim), Label Density (Minimal shows only the dominant reference, Normal shows all active, Detailed appends state names to labels), Show Reaction Bands, Mark First Touches.
Panel — position (four corners), font size, label font size. All default to Normal per AG Pro Series visual standards.
Sensitivity — Touch Threshold (ATR multiple defining a touch), Reclaim Confirm Bars (strict-mode confirmation count), Band Width (reaction band width in ATR), Far Distance (ATR multiple beyond which references are faded to context).
All parameters are ATR-scaled so defaults transfer cleanly across instruments and timeframes.
🔸 HOW TO USE
1. Open the panel and read the controller. If the footer shows "D-Open Controls" with a Bull bias, intraday operators treat Daily Open as the session pivot and trade with that bias until the state changes.
2. Watch the confluence label. A grouped label such as "D-Open + W-Open + PClose" means three references are stacked — a cluster of this kind is typically a higher-conviction zone than a single isolated reference.
3. Use state transitions as triggers. A Rejected state at Monthly Open during a rally is a different signal than a Reclaimed state at the same level. The state tells you what just happened at the level, not just where the level is.
4. Use the far zone as context. A Monthly Open plotted as a gray zone five ATR away from price is not an execution level — it is orientation. When price approaches it, the zone transitions into an active band and the state engine re-engages.
5. Combine with your own structure work. This map is designed to sit underneath price action analysis, order flow, or trend tools, not replace them.
🔷 LIMITATIONS AND TRANSPARENCY
• This is an indicator, not a strategy. No entries, exits, position sizing, or backtesting is performed.
• Reference prices are sourced from higher timeframe candles using confirmed lookahead. Results on intraday charts should match the official Daily, Weekly, and Monthly opens of the exchange the chart is connected to.
• State classifications are heuristic. They describe observed behavior at each level in historical terms and should not be read as forecasts. A Reclaimed state is a description of what just happened, not a prediction of what comes next.
• ATR-based thresholds mean the map adapts to volatility but can feel different on very low-volume or very thinly traded instruments. Adjust the touch threshold and far distance inputs if defaults feel too loose or too tight.
• Confluence grouping uses a 0.5 ATR window. On very wide-range days this window can become large; on very narrow ranges it can feel tight.
🔶 RISK DISCLOSURE
This indicator is provided for informational and educational purposes only. It does not constitute financial advice, investment advice, trading advice, or any other form of advice. Past performance of any level, state, or methodology shown on the chart does not guarantee future results. Trading and investing involve substantial risk of loss. You alone are responsible for your decisions, for managing your risk, and for complying with the laws and regulations that apply to you. Test any tool on a demo account or in paper trading before using it with real capital. อินดิเคเตอร์
Volume Shelf Reaction Map [AGPro Series]Volume Shelf Reaction Map
🔷 OVERVIEW
Volume Shelf Reaction Map is a structural price-action tool that identifies horizontal zones where volume has historically stacked — "volume shelves" — and classifies, in real time, how price reacts each time it returns to them. Instead of showing a static S/R line, it answers a sharper question: when price revisits this level, does it hold, get reclaimed, get rejected, or lose the level entirely? Fresh shelves (never revisited) are visually separated from reused ones, so the chart communicates not just where the levels are, but which ones still carry unused participation behind them.
🧭 UNIQUE EDGE
Most support/resistance and volume tools stop at drawing a zone. This script adds a reaction-state layer on top of shelf detection:
• Five reaction states per shelf: TOUCH, HELD, RECL (reclaimed), REJ (rejected), LOST
• Fresh vs Reused classification — shelves that have already been tested at least once are faded, so untouched structural levels stand out immediately
• Sticky state logic — a shelf keeps its reaction color until a new transition actually occurs, preventing flicker between bars
• Passive-window coloring — shelves whose last reaction is older than the user-defined active window fade to the neutral accent color, keeping old/stale levels visible without dominating the chart
• Strongest-shelf-only reaction tags with cooldown — reaction labels are printed only for the highest-strength shelf and only on actual state transitions, producing a clean chart even on long histories
The result is a volume-aware reaction map rather than a crowded S/R overlay.
🧪 METHODOLOGY
1. Pivot detection — standard pivot highs and lows over a configurable pivot length act as shelf candidates.
2. Volume qualification — each pivot bar is checked against a rolling 20-bar volume average; bars above the Volume Filter multiplier contribute extra weight to shelf strength.
3. ATR-based clustering — candidates within a configurable ATR multiple of an existing shelf are merged using a touches-weighted mean price, stabilizing the shelf location as evidence accumulates.
4. Confirmation — a shelf must reach the Minimum Touches threshold before it is rendered; weak candidates are pruned after one-third of the lookback window.
5. State machine — on every confirmed bar, a shelf's reaction is updated against the prior close's side (support vs resistance context), using an ATR-scaled buffer to distinguish genuine holds and losses from noise.
6. Ranking and rendering — on the last bar, shelves are sorted by strength; only the top N are drawn, with fresh shelves rendered solid and reused shelves rendered thinner and faded.
🔔 SIGNALS & ALERTS
Three alert types, each debounced per shelf so the same state cannot spam consecutive bars:
• Shelf Touched — price range intersects a confirmed shelf for the first time since its last transition
• Shelf Respected — price HELDs, RECLs, or REJs at a shelf (reaction in favor of the shelf)
• Shelf Lost — price closes through a shelf with the required ATR buffer
Reaction tags on the chart (HELD / RECL / REJ / LOST) are printed only for the strongest shelf and only on a true state transition, with a user-adjustable cooldown for historical cleanliness.
⚙️ KEY INPUTS
Shelf Detection
• Lookback Window (bars) — how far back the pivot scan reaches
• Pivot Strength — bars required on each side of a pivot
• Cluster Distance (x ATR) — how tightly nearby pivots merge
• Minimum Touches — confirmation threshold
Filters & Cleanup
• Volume Filter (x average) — participation threshold for strength weighting
• Show Fresh Shelves Only — hide already-revisited shelves
• Max Shelves to Display — cap visible shelves for chart cleanliness
• Fade Reused Shelves — dim reused shelves so fresh ones stand out
• Reaction Sensitivity (x ATR) — ATR buffer used by the state machine
• Active Window (bars) — how recently a reaction must have occurred to show in full color
Visuals
• Label & Panel Size — Tiny / Small / Normal / Large (default: Normal)
• Show Reaction Tags — toggle on-chart state labels
• Tag Cooldown (bars) — minimum bars between tags on the same shelf
Panel
• Show Info Panel, Panel Location (6 anchors), Panel Theme (Dark / Light)
Alerts
• Shelf Touched, Shelf Respected, Shelf Lost
🧰 HOW TO USE
1. Add the indicator to any liquid symbol and timeframe. Volume-aware markets (crypto, index futures, major FX) and timeframes from 15m upward tend to produce the most structured shelves.
2. Start with defaults. The Active Window of 30 bars is a reasonable middle-ground; reduce it on intraday charts (around 20) or raise it on daily/weekly (30–60).
3. Read the panel:
• Active Shelves — how many of the eligible shelves are currently drawn
• Strongest Shelf — the top-ranked shelf by strength
• Current State — live reaction state of the top shelf
• Fresh / Reused — how the displayed shelves split between untested and already-tested levels
4. Use fresh shelves as higher-quality reaction candidates; treat reused shelves as context, not primary triggers.
5. Combine the HELD / RECL / REJ / LOST reactions with your own trigger logic (e.g. break-retest, liquidity sweeps, momentum shifts). This script is a location and reaction tool — not a standalone trade system.
🧱 LIMITATIONS & TRANSPARENCY
• This indicator describes historical structure and live reactions; it does not forecast price direction.
• Pivot-based detection requires the Pivot Strength window to complete on both sides, so fresh pivots appear with a natural lag equal to the pivot length.
• On very low-volume symbols or illiquid timeframes, shelves may be sparse or unstable.
• The state machine is bar-close based; intrabar wicks can temporarily intersect a shelf without changing its state until the bar confirms.
• Max drawing limits (max_lines_count, max_labels_count, max_boxes_count) are set to 120; extremely long histories combined with large lookbacks may drop the oldest drawings.
⚠️ RISK DISCLOSURE
This script is provided for educational and analytical purposes only. It is not a strategy, not a buy/sell signal generator, and not financial advice. Trading involves substantial risk of loss. Past behavior of levels, volume, or reactions does not guarantee future outcomes. Always apply your own risk management, position sizing, and independent judgment. The author and AGProLabs accept no responsibility for decisions made based on this indicator. อินดิเคเตอร์
Rejection Block Quality [AGPro Series]Rejection Block Quality
🔹 OVERVIEW
Rejection Block Quality is an ICT-inspired detector that identifies long-wick rejection candles at swept swing pivots and grades each block by objective quality criteria. Unlike Order Block logic — which anchors to the last opposite-direction body before displacement — a Rejection Block (RB) is born from a wick that pierces a prior swing liquidity pool and closes back inside it, with the body confirming displacement on the follow-through bar. The rectangle is drawn from the wick base to the candle body, capturing the exact zone where smart money absorbed the sweep.
🎯 UNIQUE EDGE
Three design choices separate this tool from generic wick or order block indicators:
• Swing-pivot sweep requirement — a rejection is only counted when price sweeps a confirmed swing high or low before the reversal close. Stand-alone wick patterns without liquidity context are filtered out.
• Displacement confirmation window — the candle following the rejection must travel at least 0.6× ATR in the reversal direction, within a 1–5 bar lookahead. No displacement, no block.
• Quality tiering (A / B / C) from three orthogonal factors — wick-to-body ratio, displacement magnitude, and untested freshness. An exceptional wick ratio (≥5× body) promotes a block to A tier regardless of other scores, preserving rare high-conviction rejections.
🛠️ METHODOLOGY
Detection pipeline on every bar:
1. Confirm a pivot sweep using a user-configurable lookback (default 5 bars each side).
2. Check the wick-to-body ratio against a minimum threshold (default 1.8×), with the dominant wick on the sweep side.
3. Queue the candle as a pending block and wait for displacement confirmation.
4. Measure displacement as price travel from the body reference over 1 to 5 bars, normalized by ATR.
5. On confirmation, draw the RB zone from the wick base to the body, record the tier, and begin lifecycle tracking.
Zone lifecycle tracks four events — test (price enters the zone), hold (price exits without a body close through the far edge), break (body close through the far edge), and near miss (price approaches within a configurable ATR band without entering). All events are edge-detected to prevent inflated counts when price lingers near a zone.
📊 SIGNALS & ALERTS
• New block formation label — A / B / C tier plus wick ratio, placed with anti-collision offset.
• Test markers (T) — one per zone entry event, with cooldown to prevent visual clutter.
• Break markers (B) — placed when a zone is invalidated by a body close.
• Wick border highlight — thick colored line on the originating rejection candle.
• Alerts — configurable minimum tier (A, B, or C) fires once per bar close for each qualifying new block.
⚙️ KEY INPUTS
• Detection — Pivot Length, Min Wick-to-Body Ratio, ATR Length, Min Displacement (× ATR), Displacement Confirm Window.
• Zone Management — Max Active Zones per Side, Zone Right Extension, Near-Miss Distance, Near-Miss Cooldown, Break Requires Full Body Close.
• Visuals — Show Zones, Show Tier Labels, Highlight Rejection Wick Border, Show Test / Hold / Break Markers, Zone Fill Opacity, Label Font Size.
• Panel — Show Panel, Panel Location, Panel Font Size, Panel Theme (Dark / Light).
• Alerts — Minimum Tier for Alerts.
🧭 HOW TO USE
Start on a higher timeframe (4H or 1D) to identify macro RB zones, then drill down to execution timeframes for entries. Treat A-tier blocks as the highest-conviction zones, B-tier as situational, and C-tier as context-only. Combine with trend filters, higher-timeframe structure, and risk management — a Rejection Block is a zone of interest, not a standalone buy or sell signal. Use the panel statistics to evaluate how the selected symbol and timeframe have historically respected these zones before committing to them in live decision-making.
⚠️ LIMITATIONS & TRANSPARENCY
This indicator is a structural detector, not a trading strategy. It does not forecast price direction, generate entry or exit orders, or calculate position sizing. The Success Rate statistic reflects how often past tests on detected zones held versus failed within the visible history — it is a descriptive metric, not a performance projection. Zone detection is historical and reactive: a block only appears after the displacement bar closes, so interpretation on live-forming bars is tentative. Performance varies by symbol, timeframe, and market regime.
⚠️ RISK DISCLOSURE
Trading involves substantial risk of loss. Past behavior of any pattern does not guarantee future outcomes. Use this tool as part of a complete analytical framework that includes your own risk management, position sizing, and broader market context. Nothing in this indicator or description constitutes financial advice. อินดิเคเตอร์
BIST30 TARAYICI⚠️ ÖNEMLİ: EKRAN TEMİZLİĞİ (GİZLEME NOTU)
Bu tarayıcı, tüm parametreleri ayarlardan değiştirmenize imkan tanıdığı için TradingView bu isimleri ekranın sol üstünde uzun bir liste olarak gösterir. Bu görüntü kirliliğini engellemek için:
**Grafiğe sağ tıklayın -> Ayarlar -> Durum Çizgisi** sekmesine gidin ve gösterge isminin yanındaki **"Argümanlar"** kutucuğunun tikini kaldırın.
BİST 30 Tarayıcı
Bu panel, BİST30 hisselerini anlık trend döngüleri, Price Action (Fiyat Hareketi) formasyonları ve yüksek zaman dilimli (HTF) Fibonacci hedefleri üzerinden tarayan profesyonel bir analiz istasyonudur.
**⚠️ YASAL UYARI:** *Bu gösterge matematiksel bir algoritmadır; algoritma doğru olmayabilir; kodlama hatası olabilir bu nedenle kesinlikle yatırım tavsiyesi (YTD) niteliği taşımaz. Kararlarınızı kendi risk yönetiminize göre almalısınız.*
---
1. Sinyal ve Statü Mantığı (Nasıl Çalışır?)
Sistem, bir hissenin yükseliş karakterini 4 farklı evrede takip eder:
NÖTR (Gri):** Hisse genel düşüş trendindedir veya ortalamaların altındadır. "İzleme, enerjini harcama" mesajıdır.
TREND (Soluk Yeşil):** Hisse sağlıklı bir yükseliş trendine girmiştir (EMA 5 > 8 > 13). Yön yukarıdır ancak yeni giriş için fiyat çok yükselmiş olabilir.
PUSU (Sarı):** **Stratejinin Kalbi!** Trend yukarıyken fiyatın kâr satışlarıyla "İndirim/Destek" bölgesi olan EMA 8'e gerilediği aşamadır. Avcının pusuya yatıp onay beklediği yerdir.
AL - (Parlak Yeşil):** **Tetik Çekme Zamanı!** Hisse pusu bölgesindeyken alıcıların güç gösterdiğini kanıtlayan şu formasyonlardan biri oluşmuştur:
AL-Star :Sabah Yıldızı (En Güvenilir Dönüş).
AL-Eng :Yutan Boğa (Güçlü Alıcı Onayı).
AL-Har :İç Mum (Sıkışma ve Patlama Hazırlığı).
AL-Pin :Pin Bar/Çekiç (Alt İğneyle Fiyat Reddi).
AL-Doj :Doji (Kararsızlığın Alıcı Lehine Bitmesi).
2. Destek ve Dirençler (Hedef Zaman Dilimi)
Tablodaki **D1-D5** seviyeleri, ayarlardan seçtiğiniz üst periyoda (Örn: Günlük) göre hesaplanır. Sütun başlıklarındaki parantez içi etiketler (D, W, 60 vb.) hangi hedefleri izlediğinizi gösterir.
**Mantık:** Seçilen üst periyodun önceki günkü High-Low (En Yüksek-En Düşük) farkı baz alınır.
**Hedef:** Bu fark Fibonacci altın oranlarıyla çarpılarak potansiyel kâr al bölgelerini (D1'den D5'e) belirler.
3. Algoritma Derinliği ve Parametreler
Sistem, piyasa gürültüsünü filtrelemek için üçlü bir emniyet mekanizması kullanır:
* **Trend Tescili (EMA 13):** En yavaş ortalamadır. Fiyat bu seviyenin altındaysa sistem asla "AL" vermez; bu sizi düşen bıçağı tutmaktan korur.
* **Dinamik Hassasiyet (ATR):** "Pusu" bölgesi sabit bir çizgi değildir. Ayarlardaki **ATR Periyodu** ve **Pusu Hassasiyeti**, hissenin kendi oynaklığına göre desteğe ne kadar yaklaşınca sinyal vereceğini belirler. (Standart: ATR 14 / Hassasiyet %0.2).
* **Onay Mekanizması:** Sinyaller periyot kapanışıyla (Örn: 20dk mum kapanışı) netleşir. Bu, anlık iğnelerin sizi yanıltmasını engeller.
4. Stratejik Kullanım Önerisi
1. **Filtre:** Sadece fırsatları görmek için **"Sadece Fırsatları Göster"**i işaretleyin.
2. **Hazırlık:** SARI (Pusu) statüsündeki hisseleri izleme listenize alın.
3. **Aksiyon:** Statü PARLAK YEŞİL (AL) olduğunda işleme girin.
4. **Kâr Al:** Tablodaki **D1, D2 ve D3** seviyelerini kademeli satış hedefleri olarak takip edin.
5. **Disiplin:** Statü tekrar GRI (Nötr) statüsüne dönerse, bu teknik olarak trendin veya desteğin kırıldığı anlamına gelir; manuel stop veya pozisyon kapatma için bir uyarıdır.
**⚠️ YASAL UYARI:** *Bu gösterge matematiksel bir algoritmadır; algoritma doğru olmayabilir; kodlama hatası olabilir bu nedenle kesinlikle yatırım tavsiyesi (YTD) niteliği taşımaz. Kararlarınızı kendi risk yönetiminize göre almalısınız.*
อินดิเคเตอร์
Svopex FVGSvopex FVG — multi-timeframe Fair Value Gaps with flexible mitigation
Detects and plots Fair Value Gaps (3-candle price imbalances) from any timeframe you choose, with full control over when a gap is considered "closed". Built on
@twingall's original FVG indicator (MPL 2.0), extended for higher-timeframe detection and more granular fill logic.
How FVGs are detected
A bullish (Up) FVG forms when high < low — i.e. candle −3's high is below candle −1's low, leaving an unfilled gap between them. A bearish (Down) FVG is the
mirror case: low > high . Detection happens on the Zone timeframe you pick, not the chart timeframe, so you can view HTF gaps while trading a lower timeframe.
Detection is non-repainting — only closed HTF candles are used (via request.security with lookahead_off and a 1-bar shift).
Zone timeframe
Two ways to control which timeframe drives detection. Either set the Zone timeframe explicitly (default 1H), or flip the "Use chart timeframe" toggle — when on, the
indicator automatically follows the chart's current timeframe, so switching your chart from 1H to 15M also switches the displayed FVGs. The Zone timeframe input is
ignored while the toggle is on, but stays available as a fallback.
Fill threshold
Controls when a gap stops extending to the right. A single slider (0–100%) replaces the older "Use CE vs Full Fill" toggle. Set it to 100 and the FVG remains active
until price fully closes the gap. Set it to 50 and it closes at the midline (equivalent to a CE / Consequent Encroachment touch). Set it to 0 and any penetration of
the gap's near edge counts as a hit. Any value in between works — e.g. 70 means the FVG ends when price has filled 70% of its height.
Include wick
Decides what price data drives the fill check. When off (default, body-only), the gap only closes if the candle's body (max/min of open/close) crosses the threshold —
intrabar wicks are ignored. When on, wicks count too (strict mode): a long shadow through the gap is enough to close it.
Visuals
Up FVGs render in green, Down FVGs in red, both at 80% transparency by default — matching the Svopex Supply & Demand Zones indicator for visual consistency if you use
both. Colors are user-configurable. Optional "delete filled boxes" fully hides mitigated gaps instead of just freezing them. A lookback (in days) controls how far back
fresh FVGs are allowed to be drawn.
Alerts
Six alert conditions are exposed. "ABOVE/BELOW threshold" fires when price crosses the fill threshold of the latest active FVG in each direction — useful for CE
rejections or full-fill confirmations. "IOFED into latest active Up/Down FVG" fires when price first enters the gap at its near edge, regardless of the fill threshold
setting. "Simple alert: Up/Down FVG (confirmed)" fires the moment a fresh FVG forms on the chosen HTF.
Settings summary
Lookback in days, Use chart timeframe toggle, Zone timeframe (default 60), Up/Down FVG visibility and colors, Delete filled boxes, Fill threshold percent (default 50),
Include wick.
Based on the original FVG indicator by @twingall (MPL 2.0). Extensions by Petr Svoboda: removed legacy CE display, replaced the CE-vs-Full-Fill toggle with a
continuous fill percent, added HTF detection via request.security, added the chart-TF auto-follow toggle, aligned default colors with Svopex Supply & Demand Zones.
อินดิเคเตอร์
Swing Failure Pattern (SFP) Engine [AGPro Series]Swing Failure Pattern (SFP) Engine
────────────────────────────────────────────────────────────
OVERVIEW
────────────────────────────────────────────────────────────
Swing Failure Pattern (SFP) Engine detects high-probability liquidity sweep
events at prior swing highs and lows. An SFP occurs when price pierces a
recent swing level with a long wick but closes back inside the prior range,
signalling failed continuation and potential mean reversion. Each event is
scored on four components, drawn as a mid-sized support/resistance reaction
zone, and tracked through its live cycle — with panel statistics on MFE,
MAE, and hit rate. Designed for visual pattern reading and confluence;
not a buy/sell system.
────────────────────────────────────────────────────────────
UNIQUE EDGE
────────────────────────────────────────────────────────────
Most SFP indicators mark the sweep candle and stop there. This engine treats
each SFP as a living support/resistance band: the zone extends to the right
every bar and only freezes when the swept level is actually broken on close.
That preserves the SR context that traders use in real decisions, without
cluttering charts with zones that never die. A composite score (0-100),
confluence grouping of nearby events within 0.5 ATR, and live MFE/MAE
tracking in ATR units turn a common pattern into a measurable framework.
────────────────────────────────────────────────────────────
METHODOLOGY
────────────────────────────────────────────────────────────
Swing detection uses pivot highs and lows confirmed by a configurable
lookback. An SFP is confirmed on bar close when four conditions are met:
1. The bar wicks beyond a prior unswept swing high (bearish) or swing low
(bullish) within the active lookback window.
2. The close reclaims the prior range by at least the user-defined ATR
distance (default 0.25 ATR).
3. The sweep-side wick represents at least the minimum wick ratio of total
bar range (default 55 percent).
4. Bar volume exceeds its 20-period SMA by the configured multiplier
(optional, default 1.15x).
Composite score (0-100) weights wick ratio (40), reclaim distance in ATR
(30), volume confirmation (15), and swing age (15). Only events above the
minimum score threshold are drawn. Each confirmed SFP removes its swept
swing from the active array to prevent re-triggering on the same level.
Confluence grouping merges same-side events within 0.5 ATR into a single
labelled zone with an x2, x3 count.
────────────────────────────────────────────────────────────
SIGNALS & ALERTS
───────────────────────────────────────────────────────────
Visual signals on chart:
- State-coloured label at the sweep bar reading Bull SFP or Bear SFP with
the composite score (e.g., Bull SFP 74). Confluence-grouped events are
suffixed with the merge count (e.g., Bear SFP 81 x2).
- Rectangular zone spanning the swept level and the SFP close, with a
small ATR buffer. The zone extends right each bar while active and
freezes in neutral grey when the swept level breaks.
- Dotted horizontal line marking the swept swing level.
- Dashed projection line indicating the reversal direction.
Alert conditions:
- Bullish SFP: fires on the confirmation bar of a bullish event above
the score threshold.
- Bearish SFP: same, for bearish events.
- Zone Invalidation (optional): fires when an active zone's swept level
is broken on close.
────────────────────────────────────────────────────────────
KEY INPUTS
────────────────────────────────────────────────────────────
Detection:
- Swing Pivot Length - bars each side of a pivot (default 5).
- Swing Lookback - how far back active swings are tracked (default 120).
- Min Wick Ratio - minimum sweep wick as fraction of bar range (0.55).
- Min Reclaim Distance (ATR) - how far close must reclaim (0.25 ATR).
- Require Above-Average Volume and Volume Multiplier (default 1.15x).
- ATR Length (default 14).
Scoring & Filters:
- Min SFP Score (default 55 of 100).
- Max Active Zones retained on chart (default 8).
- Stats Timeout - bars after which an unresolved event is counted in
averages (default 30). Does not affect zone visibility.
Visuals:
- Zone transparency (default 80), confluence grouping distance (0.5 ATR),
label size, and toggles for zones, swing lines, and reversal projections.
Panel:
- Location (8 options), Dark/Light theme, text size.
Alerts:
- Independent toggles for bullish, bearish, and invalidation alerts.
────────────────────────────────────────────────────────────
HOW TO USE
────────────────────────────────────────────────────────────
Apply the indicator to any chart and timeframe. Higher timeframes (1h and
above) produce cleaner swings; lower timeframes require a higher Min Wick
Ratio and Min Score to filter noise.
Read SFPs as liquidity sweep events, not standalone entries. A bullish SFP
below a prior swing low indicates that sellers failed to extend the move —
often a location where larger participants accumulate. The score reflects
sweep quality; higher scores (70+) generally correspond to cleaner
rejections. Use the zone as a support/resistance reference until it is
invalidated.
Panel statistics describe the observed sample on the loaded chart, not a
backtested system. MFE Hit Rate is the percent of resolved zones that
reached 1 ATR in the SFP direction before the swept level broke — it is a
quality reference, not a win rate for any trading strategy.
────────────────────────────────────────────────────────────
LIMITATIONS & TRANSPARENCY
────────────────────────────────────────────────────────────
- Signals confirm on bar close; intrabar conditions may change until close.
- Pivot detection introduces a natural bars-of-right-context lag equal to
the Pivot Length. This is intrinsic to any pivot-based approach.
- Panel statistics reflect events visible on the current chart load and
will vary with timeframe, symbol, and bar range.
- MFE Hit Rate is not a profit expectation. It measures whether price
moved 1 ATR in the SFP direction before the swept level broke.
- Volume confirmation uses chart volume and may behave differently on
symbols with inconsistent volume data.
- The indicator uses standard Pine Script drawing objects. Chart reload
may reset ephemeral visual states of resolved zones.
────────────────────────────────────────────────────────────
RISK DISCLOSURE
────────────────────────────────────────────────────────────
This indicator is a visualisation and analysis tool. It is not a trading
system, not financial advice, and not a signal service. It does not
predict future price movement. All trading decisions carry risk of loss
and are the sole responsibility of the user. Historical pattern behaviour
does not guarantee future results. Test thoroughly on your instruments
and timeframes before making any decisions. อินดิเคเตอร์
LK Ultimate 5m Master PRO +A 5-minute execution indicator built for structured intraday trading. This script combines a true 5-minute opening range, higher-timeframe trend context, a 15-minute setup filter, a configurable moving average filter, and an optional UT Bot confirmation module into one clean workflow.
What it does
Captures the true 5-minute opening range and plots its high/low as support and resistance.
Reads the 1-hour regime to identify bullish expansion, bearish expansion, or compression.
Evaluates the last closed 15-minute candle for setup quality.
Uses a single configurable moving average for execution filtering, with 20 SMA as the default.
Includes an optional UT Bot filter that can be used either as confirmation or as a standalone signal engine.
Displays a compact dashboard so the chart stays clean.
Uses simple visual outputs such as lines, bar colors, and small signal markers.
How to use it
Apply the script to a 5-minute chart.
Keep the default 20 SMA unless you want a faster or smoother filter.
Watch the ORB levels after the opening range is locked.
Use the 1H regime and 15M setup rows in the dashboard to judge whether conditions support long or short execution.
Use UT Bot in Confirm mode if you want extra filtering.
Longs are strongest when price is above the MA, above ORB resistance, and the higher-timeframe conditions are aligned.
Shorts are strongest when price is below the MA, below ORB support, and the higher-timeframe conditions are aligned.
Notes
Best used for intraday execution on the 5-minute chart.
The script is designed to reduce clutter by keeping most information in the dashboard rather than plotting many indicators directly on the chart.
Test settings on your market and session before relying on them live. อินดิเคเตอร์
LK Ultimate 5m Master PROA 5-minute execution indicator built for structured intraday trading. This script combines a true 5-minute opening range, higher-timeframe trend context, a 15-minute setup filter, a configurable moving average filter, and an optional UT Bot confirmation module into one clean workflow.
What it does
Captures the true 5-minute opening range and plots its high/low as support and resistance.
Reads the 1-hour regime to identify bullish expansion, bearish expansion, or compression.
Evaluates the last closed 15-minute candle for setup quality.
Uses a single configurable moving average for execution filtering, with 20 SMA as the default.
Includes an optional UT Bot filter that can be used either as confirmation or as a standalone signal engine.
Displays a compact dashboard so the chart stays clean.
Uses simple visual outputs such as lines, bar colors, and small signal markers.
How to use it
Apply the script to a 5-minute chart.
Keep the default 20 SMA unless you want a faster or smoother filter.
Watch the ORB levels after the opening range is locked.
Use the 1H regime and 15M setup rows in the dashboard to judge whether conditions support long or short execution.
Use UT Bot in Confirm mode if you want extra filtering.
Longs are strongest when price is above the MA, above ORB resistance, and the higher-timeframe conditions are aligned.
Shorts are strongest when price is below the MA, below ORB support, and the higher-timeframe conditions are aligned.
Notes
Best used for intraday execution on the 5-minute chart.
The script is designed to reduce clutter by keeping most information in the dashboard rather than plotting many indicators directly on the chart.
Test settings on your market and session before relying on them live. อินดิเคเตอร์
อินดิเคเตอร์
Svopex Supply & Demand ZonesAutomatically detects and plots Supply and Demand zones using 4H price action — works on any chart timeframe.
This indicator draws the classic Supply & Demand zones that institutional traders watch: areas
where price consolidated (a "base") and then exploded away sharply. These zones often act as
powerful support/resistance when price returns.
- Supply zones (red) — where price consolidated, then dropped sharply → expect selling
pressure on retest.
- Demand zones (green) — where price consolidated, then rallied sharply → expect buying
pressure on retest.
- Zones extend to the right and automatically freeze the moment price closes through them, so
your chart stays clean.
- Detection always runs on the 4H timeframe (configurable), regardless of the chart you're
viewing — so zones stay consistent whether you're on 15m, 1H, 4H or Daily.
How it works
A zone is formed by the textbook 4-candle patterns:
- DBR (Drop → Base → Rally) → Demand zone
- RBR (Rally → Base → Rally) → Demand zone
- RBD (Rally → Base → Drop) → Supply zone
- DBD (Drop → Base → Drop) → Supply zone
Detection logic:
1. Base candle = body smaller than Base body ≤ ATR × (default 0.5 × ATR).
2. Explosive candle = body larger than Explosive body ≥ ATR × (default 1.5 × ATR).
3. When 1–3 base candles are followed by an explosive candle, the base range becomes a zone.
4. The zone is drawn from the base's start time, with top = highest base high and bottom =
lowest base low.
5. Zones are non-repainting — detection uses the previous confirmed HTF bar (request.security
with lookahead_off + ).
Inputs
• Zone Timeframe — default 240 (4H). Timeframe used for zone detection.
• Max base candles — default 3. Maximum base candles allowed before the explosive move.
• Base body ≤ ATR × — default 0.5. Base candle body must be smaller than this × ATR.
• Explosive body ≥ ATR × — default 1.5. Breakout candle body must be larger than this × ATR.
• ATR length — default 14. Reference volatility for base/explosive classification.
• Supply / Demand fill — default red / green @ 80% transparency. Zone colors, fully
customizable.
• Show labels — default ON. Displays "Supply" / "Demand" text labels.
• Max active zones per side — default 20. FIFO cap to keep the chart tidy.
How to use it
- Swing / day trading: Watch for price to retest a zone and look for rejection candles /
reversal signals.
- Confluence: Zones overlapping with POC, VAH/VAL, LVN, prior session high/low or
psychological levels are significantly stronger.
- Trend continuation: In an uptrend, buy retests of Demand zones; in a downtrend, sell retests
of Supply zones.
- Broken zones: Once price closes through a zone, the box is frozen — a broken Supply often
flips into Demand (and vice versa).
Tuning guide
- Too many zones? Increase Explosive body ≥ ATR × to 2.0 and/or lower Base body ≤ ATR × to
0.3.
- Not enough zones / high-volatility asset? Raise Max base candles to 5–6 and lower Explosive
body ≥ ATR × to 1.2.
- Forex / indices / futures → defaults work well.
- Crypto → try Explosive body ≥ ATR × = 2.0 for cleaner signals.
Notes
- Detection is based on candle bodies, not wicks — long-wick base candles may occasionally
produce wider zones than expected.
- Zone break is measured on close, not wick — intrabar spikes through a zone will NOT
invalidate it (by design — filters noise).
- Zones appear only after the next 4H candle confirms → non-repainting, but with one HTF-bar
delay.
Open-source. Feel free to fork, tweak, and make it your own. Feedback welcome in the comments. อินดิเคเตอร์
Breaker Block Engine [AGPro Series]Breaker Block Engine
Overview
Breaker Block Engine is a dedicated detection and tracking tool for one of the
most misunderstood concepts in Smart Money trading: the Breaker Block. A
breaker block is an order block that has failed and flipped role — a bearish
order block broken upward now behaves as bullish support, and a bullish order
block broken downward now behaves as bearish resistance. The engine does not
just draw them; it validates each break with displacement strength, tracks
every retest, scores how well each breaker has held its role, and surfaces the
dominant bullish and bearish breakers through a clean info panel.
Unique Edge
Most breaker block scripts stop at drawing a flipped zone. This engine goes
further:
- Each break is validated using an ATR-scaled close-based displacement filter,
optionally combined with above-average volume confirmation, to reject weak
wick-based breaks.
- Every retest of a breaker is counted and evaluated as Held or Lost, and the
state label on the chart shows a live retest hold percentage for each
breaker (for example "Bull Breaker | Held x6 (100%)").
- An invalidation buffer prevents single-wick noise from prematurely killing
otherwise healthy breakers, while genuinely violated zones fade into a gray
"Lost" state and are removed from tracking shortly after.
- Intra-side and cross-side confluence grouping automatically clean up
overlapping labels so the chart stays readable even when several breakers
cluster within half an ATR.
- The info panel summarises the whole picture in one glance: dominant side,
active counts per side, nearest breaker distance in both price and ATR
multiples, and overall retest hold percentage.
Methodology
1. Swing Detection. Confirmed pivot highs and pivot lows are identified using
a configurable pivot length. These pivots anchor the search for order
block candidates.
2. Order Block Candidate. For each confirmed pivot high, the script walks
back up to ten bars looking for the last bearish candle — this is the
bearish order block candidate. The symmetrical process identifies bullish
order block candidates around pivot lows.
3. Break Validation. A candidate is promoted to a breaker only when price
closes past the opposite edge of the order block by at least a
user-defined ATR multiple (default 0.75 × ATR). An optional volume
confirmation filter can additionally require the break candle to trade
above its volume moving average.
4. Retest & Hold Scoring. After formation, each breaker is checked every bar.
If price re-enters the zone and the close respects the breaker's intended
direction, a Hold is recorded; otherwise the retest is counted but not
held. A minimum bar spacing prevents consecutive bars of a sustained
retest from inflating the counter.
5. Invalidation. If price closes past the far edge of the breaker by more
than the invalidation buffer (in ATR), the breaker is marked Lost,
visually faded, and removed from active tracking after a short grace
period.
6. Confluence Grouping. On the most recent bar, breakers whose mid-points
sit within max(0.5 × ATR, 0.5 % of price) of each other have their
overlapping state labels resolved: dead labels yield to alive labels,
older labels yield to newer ones. A cross-side pass prevents stale
opposite-side labels from sitting on top of active ones.
Signals & Alerts
The script provides three alert events:
- New Breaker: fires on the bar a bullish or bearish breaker is confirmed.
- Retest Hold: fires when price retests an active breaker and the close
respects the zone direction.
- Invalidation: fires when an active breaker is broken in the opposite
direction beyond the invalidation buffer.
On-chart signals include the zone itself (coloured by side), a small
directional triangle at the break point, and a dynamic state label on the
right edge showing the breaker's test count and hold percentage.
Key Inputs
- Swing Pivot Length: bars on each side used to confirm swings. Higher values
produce fewer but structurally stronger swings.
- Max Active Breakers per Side: hard cap on simultaneously tracked bullish
and bearish breakers; oldest are pruned when the limit is reached.
- Displacement Strength: ATR multiple required for a close-based break to
validate. Higher values produce fewer, stronger breakers.
- Require Volume Confirmation: when enabled, the break candle must trade
above its volume moving average.
- Invalidation Buffer: ATR buffer added beyond the breaker edge before the
breaker is considered invalidated. Prevents wick-based noise kills.
- Min Bars Between Retests: minimum bar spacing between consecutive retests
of the same breaker, keeping counters from inflating on sustained visits.
- Zone Transparency, Colours, Label & Panel Sizes: full visual control.
- Panel Location, Theme, Far Zone Threshold: the info panel can be placed in
any of six positions, switched between Dark and Light theme, and the
threshold for labelling distant zones as "Far" is user-configurable.
How to Use
- On mid-to-high timeframes (15m and up), leave the defaults. The engine is
tuned for 15m to 4h out of the box but works on any timeframe and
instrument.
- Use the state label hold percentage as a quality gauge. A breaker with a
long history of holds (for example "Held x6 (100%)") has demonstrated
institutional interest at that level; a breaker with mixed results deserves
more caution.
- Use the panel to orient quickly. If the dominant side is Bullish and the
nearest bullish breaker sits within a fraction of an ATR, the chart is in
a supportive regime for long bias; if both nearest values show "Far",
price is floating between structures and caution is warranted.
- Combine with higher-timeframe context. A bullish breaker on the 1h that
aligns with a bullish breaker on the 4h is a stronger zone than either
alone.
Limitations & Transparency
- This is an indicator, not a strategy. It draws zones and tracks their
behaviour; it does not generate buy or sell orders, manage positions, or
calculate performance statistics against a price series.
- Pivot-based detection is inherently lagging by the pivot length: a swing
is only confirmed once the configured number of bars have printed past it.
- Results depend on input choices. Different displacement multipliers, pivot
lengths, and retest gaps will produce different breaker sets. The defaults
are a starting point, not a recommendation.
- No indicator can guarantee future behaviour. A breaker that has held ten
times in the past can fail the next time it is tested.
Risk Disclosure
This script is provided for educational and research purposes only. It is not
financial advice and does not constitute a recommendation to buy, sell, or
hold any instrument. Trading carries substantial risk of loss. Users are
solely responsible for their own trading decisions and risk management. Past
behaviour of a breaker, or of any zone shown by this script, does not
guarantee future results. อินดิเคเตอร์
Mitigation Block Quality [AGPro Series]OVERVIEW
Mitigation Block Quality grades every order-block retest as A, B, or C based on
the strength, speed, and follow-through of the bounce after price returns to
the block. Instead of just drawing order blocks and leaving you to guess
which ones matter, the script measures each mitigation objectively and keeps
a live scoreboard of how those reactions have been performing.
The result is an order block tool that tells you two things at once: where
the zones are, and how well price has historically respected them on the
symbol and timeframe you are looking at.
UNIQUE EDGE
Most order-block indicators end at detection. This one begins there. Each
time a block is mitigated, the script measures the reaction over a fixed
window and grades the bounce by its ATR-normalized magnitude. That grade
is then reflected everywhere: on the block border, in the on-chart label,
in the dashboard, and in the historical success-rate statistics.
You also get multi-timeframe context, confluence detection, streak tracking,
and a dynamic setup banner that describes the current price-block
relationship in plain English.
METHODOLOGY
1. Detection. Swing pivots are identified using a configurable pivot length.
The last opposite-colored candle before the pivot forms the order block.
2. Mitigation. A block is mitigated when price re-enters the zone.
3. Grading. After a fixed reaction window, the script measures the peak of
the bounce and normalizes it to ATR. Grade A is a strong bounce, B is
solid, C is weak.
4. Invalidation. A body close beyond the block marks it as invalidated.
Invalidated blocks can be hidden or shown as a dotted reference.
5. Retirement. Blocks retire by age, by distance from price, or when the
per-side cap is exceeded.
FEATURES
- A, B, or C grade assigned to every mitigation (ATR-normalized reaction)
- Reaction trail line on Grade A mitigations showing the bounce extent
- Entry marker (diamond) at the exact mitigation bar of Grade A bounces
- Confluence glow when two or more blocks overlap within 0.5 ATR
- Time-based opacity decay so older blocks recede and fresh ones pop
- Optional pulse animation on A/B blocks while price is inside them
- Price-scale labels tagging each active block's grade and side
- Higher-timeframe alignment check against a configurable HTF structural bias
- Dashboard panel with: active count, tested count, success (current),
nearest-block state (Inside / Touching / distance in ATR), all-time
success rate with stacked distribution bar, last-20 success, health
progress bar, current Win/Loss streak, HTF alignment, and a dynamic
setup banner
SIGNALS & ALERTS
Three alert conditions are provided:
- Grade A Mitigation — a premium-quality bounce has been detected
- Grade B Mitigation — a solid bounce has been detected
- Block Invalidation — an active block has been broken
These are alertconditions and can be configured from the TradingView
Create Alert dialog in the usual way.
KEY INPUTS
- Pivot Length and Lookback: control how blocks are detected and how long
they stay on the chart
- Reaction Window and Grade Thresholds (A, B in ATR units): define what
counts as a premium, solid, or weak bounce
- Invalidation Mode: choose between body close or wick pierce
- Retire Block Beyond (xATR): automatic cleanup when price moves far away
- Max Active Blocks per Side and Max Visible Labels: keep the chart premium
- Premium Visuals toggles: Reaction Trail, Entry Marker, Confluence Glow,
Quality Heatmap row, Setup Banner, Pulse, Time Decay, Price Scale Labels,
HTF Alignment, Streak row
- HTF for Alignment: the higher timeframe used for multi-timeframe confluence
- Panel location and theme
HOW TO USE
1. Add the script to any chart and timeframe.
2. Read the panel top-down:
- Last 20 breakdown tells you the recent quality regime
- Nearest Block tells you how close the closest active zone is
- All-time and Last 20 success tell you how reliable those zones have been
- Streak gives you momentum context
- HTF Alignment tells you if the bigger picture agrees
- Setup banner describes what is happening right now
3. Look at the chart:
- A/B/C labels on mitigated blocks tell you how those tests resolved
- Reaction trails and diamonds highlight the premium Grade A mitigations
- Confluence glows mark zones where multiple blocks agree
4. Use alerts to get notified when a fresh Grade A or Grade B mitigation
occurs, or when an active block is invalidated.
The tool is designed to help with discretionary analysis. It is not a
trading system and does not generate buy or sell signals on its own.
LIMITATIONS & TRANSPARENCY
- Pivots are confirmed after the swing length completes, so block detection
has a small structural lag. This is inherent to any pivot-based method.
- Grades are assigned after the reaction window closes. A very fresh
mitigation will briefly show "Active" before its grade appears.
- HTF Alignment uses a 50-period simple moving average on the chosen higher
timeframe as a structural bias proxy. It is a context filter, not a
predictive signal.
- All metrics are computed from the visible historical data on the current
chart. Loading more bars will change the all-time statistics.
- The script uses Pine Script v6 drawing objects. Extremely long histories
on very low timeframes may hit TradingView object limits; the built-in
per-side cap and distance-based retire keep this under control in normal
use.
RISK DISCLOSURE
This script is an analysis aid, not financial advice. It does not predict
future price movement and does not generate trade recommendations. Any
decision to enter or exit a position is the responsibility of the user.
Historical grade distributions are descriptive, not predictive. Past
mitigation behavior on a symbol does not guarantee future behavior.
Trade with risk capital you can afford to lose and use appropriate
position sizing and stop placement.
LICENSE
Released under the Mozilla Public License 2.0. The full source is available
on TradingView via the Open-Source badge. You are free to study and modify
the code subject to the terms of the license. อินดิเคเตอร์
Camarilla Levels Intraday @darshaksscCamarilla Pivot Levels are one of the most reliable intraday support and resistance frameworks used by professional traders worldwide. Unlike traditional pivots, Camarilla levels are derived from the previous day's range and close, giving highly precise price zones for reversals, breakouts, and targets — all calculated before the market opens.
𝗛𝗼𝘄 𝗶𝘁 𝘄𝗼𝗿𝗸𝘀:
This indicator uses the confirmed previous day's High, Low, and Close to calculate eight Camarilla levels (H3 to H6 and L3 to L6) plus Previous Day High, Low, and Close reference lines. Levels are fixed for the entire trading session and update only at the start of each new day.
𝗞𝗲𝘆 𝗟𝗲𝘃𝗲𝗹𝘀 𝗘𝘅𝗽𝗹𝗮𝗶𝗻𝗲𝗱:
- H3 — Sell Reversal zone. Price often rejects here in a downtrend
- H4 — Breakout level. A close above H4 signals strong bullish momentum
- H5 / H6 — Breakout targets 1 and 2 for extended upside moves
- L3 — Buy Reversal zone. Price often bounces here in an uptrend
- L4 — Breakdown level. A close below L4 signals strong bearish momentum
- L5 / L6 — Breakdown targets 1 and 2 for extended downside moves
- PDH / PDL / PDC — Previous Day High, Low, and Close for context
𝗙𝗲𝗮𝘁𝘂𝗿𝗲𝘀:
- Non-repainting — all levels based on confirmed previous day data
- Same values on all timeframes (5m, 15m, 1H, Daily — identical levels)
- Timeframe-aware line length — adapts automatically to your chart timeframe
- Clean dashboard showing all levels and current LTP at a glance
- Fully customisable colors for buy, sell, and target zones
- Toggle each level group independently (Reversal, Breakout, Targets, PDH/PDL/PDC)
- 4 built-in alert conditions for Breakout, Breakdown, and Reversal zones
- Coded in Pine Script v6
𝗛𝗼𝘄 𝘁𝗼 𝘁𝗿𝗮𝗱𝗲 𝘄𝗶𝘁𝗵 𝗶𝘁:
Reversal trades: Look for rejection candles at H3 (short) or L3 (long) with confirmation
Breakout trades: Wait for a candle close above H4 (long) or below L4 (short), then target H5/H6 or L5/L6
Reference: Use PDH and PDL as additional confluence zones
𝗧𝗶𝗺𝗲𝗳𝗿𝗮𝗺𝗲𝘀: Best on 5m / 15m / 1H for intraday. Works on all timeframes.
𝗜𝗻𝘀𝘁𝗿𝘂𝗺𝗲𝗻𝘁𝘀: Indices, Stocks, Futures, Forex, Crypto
⚠ This indicator is for educational and analytical purposes only.
It does not constitute financial advice. Always apply your own risk management.
by @darshakssc อินดิเคเตอร์
BTC CME Weekend Gap TrackerBTC CME Weekend Gap Tracker
Automatically detects and tracks weekend gaps on CME Bitcoin futures (BTC1!). When CME closes Friday evening and reopens Sunday/Monday, any price movement in spot during that window creates a gap — this indicator marks those gaps directly on your chart.
What it shows
Red boxes — weekend gap down (CME reopened lower than Friday close)
Green boxes — weekend gap up (CME reopened higher than Friday close)
Gray boxes — filled gaps (price has since traded back through the range)
Key features
Weekend-only filter — ignores daily maintenance gaps, only tracks the meaningful Friday-to-Monday gaps (and extended holiday closures)
Price levels labeled at the right edge of each unfilled gap so you can see exact gap boundaries at a glance
Date and percentage size shown inside each box
Unfilled gaps extend right until filled, then fade to gray
Stats table tracking total gaps, fill rate, gap-up vs gap-down fill rates, average fill time, and average gap size
How to use
Apply to any BTC chart (BTCUSD, BTCUSDT, BTCUSDT.P) on daily or intraday timeframes. The script pulls CME data automatically. Use unfilled gaps as potential price targets — historically, the majority of CME gaps fill over time, though large gaps in strong trends can remain open for extended periods.
Settings
Minimum gap size threshold (filter noise)
Max bars to track (history depth)
Toggle price levels, percentages, and dates independently
Customize gap colors
Alerts
Two alert conditions included: new weekend gap up and new weekend gap down. Set these up to get notified when CME reopens Monday with a gap.
อินดิเคเตอร์
อินดิเคเตอร์
อินดิเคเตอร์
Nilesh MTF Liquidity LevelsOverview
This indicator plots multi‑timeframe liquidity levels (highs and lows) on the chart and removes them once price sweeps the level. It is designed to help traders see where liquidity may be resting above or below current price.
How it works
The script tracks the previous candle’s high and low on several higher timeframes (15m, 30m, 1H, 4H, Daily) and draws horizontal lines from those levels into the future. When price makes a wick or close beyond a level (depending on the user setting), that level is considered swept and its line is removed from the chart.
Inputs & customization
Toggle each timeframe: Show 15m, 30m, 1H, 4H, Daily
Max levels per timeframe to control how many lines stay on the chart
Separate line width settings for each timeframe
Individual colors for each timeframe
Optional “Require close beyond level” to use candle close instead of wick for sweeps
Usage notes
These levels are not signals on their own. They are intended to be used together with your own price action, liquidity or S/R strategy. Always manage your risk and test on replay or demo before using in live trading.
อินดิเคเตอร์
อินดิเคเตอร์
