OPEN-SOURCE SCRIPT
Güncellendi JRI SMC v12
THE JRI SMART MONEY STRATEGY
Philosophy
You trade with institutions, not against them. Every decision flows from the higher timeframe down to the lower timeframe. You never enter on a lower timeframe without confirmation from above.
STEP 1 — WEEKLY (Big Picture)
Start here every week before you trade anything.
Find the ATH and ATL on the chart. These are your absolute boundaries — price respects these levels hard. Note whether the weekly candle is bullish or bearish. Is price making Higher Highs and Higher Lows (bullish) or Lower Highs and Lower Lows (bearish)? This tells you the macro bias. Only trade in the direction of the weekly trend unless you have an extremely strong counter-trend setup.
STEP 2 — DAILY (Directional Bias)
This is where you determine your bias for the week.
Look for the most recent swing High and swing Low. Mark them. Is price respecting a previous HH or HL? Is it breaking below a HL (bearish shift) or above a LH (bullish shift)? Measure the wick of the previous day’s candle — the wick shows where institutions rejected price. That rejection zone becomes your supply or demand area. The daily bias tells you whether you’re only looking for BUYs or only looking for SELLs on the lower timeframes that day.
STEP 3 — 4 HOUR (Key Levels and Zones)
This is your map for the trading session.
Draw your key psychological levels — on Gold these are every 100 points: 4700, 4800, 4900, 5000. Price always gravitates toward and reacts at these round numbers because that’s where institutions place large orders. Mark your supply zones (areas where price sold off hard from) and demand zones (areas where price bounced hard from). These become your trade locations — you only look to enter when price reaches one of these zones, not in the middle of a range.
STEP 4 — 2 HOUR (Institutional Activity)
This is where you identify what the big players are doing.
Look for institution candles — large body candles that are 2x the average size. These are institutions entering positions. After a large institution candle, price often comes back to mitigate (retest) that candle before continuing. That mitigation point is a high-probability entry. Also look for liquidity sweeps — when price wicks above a recent high or below a recent low and immediately closes back. This is institutions hunting stops before the real move. After a liquidity sweep, the move goes the other direction.
STEP 5 — 1 HOUR (Entry Zone)
Now you’re narrowing down exactly where to enter.
Look for retracements back into the 4H supply or demand zone. If the daily bias is bullish and price pulls back to a 4H demand zone on the 1H, that’s your entry zone. Look for the 1H to show a Break of Structure in your direction — a BOS confirms institutions have shifted. If the trend is already running strong, you can enter on a retest of the broken structure level rather than waiting for a deep pullback.
STEP 6 — 30 MINUTE (Counter Trend Lines and Confirmation)
This refines your entry timing.
Draw a counter trend line against the current move. When price breaks that counter trend line in the direction of your bias, that’s your trigger to prepare for entry. This is also where you confirm SMC concepts — look for a mitigation block, an order block, or a fair value gap that price is filling before continuing your direction.
STEP 7 — 15 MINUTE (Final Entry Confirmation)
Your signal timeframe.
This is where the JRI indicator fires. All 7 conditions need to align — bias, zone, BOS, retest, VWAP, EMA stack, RSI. When the score hits 5, 6, or 7 out of 7 the signal fires. On your funded account only take 6/7 or 7/7. On personal accounts 5/7 is acceptable. The 15m gives you enough detail to see the setup clearly without being too noisy.
STEP 8 — 5 MINUTE and 1 MINUTE (Precision Entry and Scalping)
This is where you time the exact entry.
On the 5m and 1m you’re looking for the same things — liquidity sweeps, institution candles, BOS — but at a micro level. For scalps you enter at the candle HIGH on a BUY or candle LOW on a SELL. Your stop goes below the candle LOW on BUY or above the candle HIGH on SELL with 0.8x ATR buffer. You measure the move in 1:3 risk-reward.
RISK MANAGEMENT RULES — NON NEGOTIABLE
These apply to every single trade no exceptions.
At T1 (1:1 R) — take 50% of your position off. Lock in profit. This is not optional.
At T2 (1:2 R) — move your stop loss to your entry price. You are now in a risk-free trade.
At T3 (1:3 R) — close the remaining position. Full target hit.
Never move your stop loss against you. Never add to a losing position. If you’re in a funded account and the trade hits your SL, that’s the end of that trade. No revenge trading.
THE 7 CONDITIONS YOUR INDICATOR CHECKS
1. Bias — Is the market structure bullish (HH+HL) or bearish (LH+LL)?
2. In Zone — Is price inside a confirmed supply or demand zone?
3. BOS — Did price break a recent structure level in your direction?
4. Retest — Did price come back and test that broken level?
5. vs VWAP — Is price above VWAP for buys, below for sells?
6. EMA Stack — Is EMA 20 above EMA 50 for buys, below for sells?
7. RSI — Is RSI above 50 for buys, below 50 for sells?
All 7 pointing the same direction means institutions are aligned with your trade. That’s when you pull the trigger.
YOUR SESSION SCHEDULE
Your primary window is the NY Open — 6:30am PST. This is when the highest volume hits and the cleanest moves happen. Gold (MGC/GC) and NQ are your instruments. Run your top-down analysis the night before or early morning before the open. Have your levels marked, your bias set, your zones identified. When the open hits you’re ready to execute, not still analyzing.
Philosophy
You trade with institutions, not against them. Every decision flows from the higher timeframe down to the lower timeframe. You never enter on a lower timeframe without confirmation from above.
STEP 1 — WEEKLY (Big Picture)
Start here every week before you trade anything.
Find the ATH and ATL on the chart. These are your absolute boundaries — price respects these levels hard. Note whether the weekly candle is bullish or bearish. Is price making Higher Highs and Higher Lows (bullish) or Lower Highs and Lower Lows (bearish)? This tells you the macro bias. Only trade in the direction of the weekly trend unless you have an extremely strong counter-trend setup.
STEP 2 — DAILY (Directional Bias)
This is where you determine your bias for the week.
Look for the most recent swing High and swing Low. Mark them. Is price respecting a previous HH or HL? Is it breaking below a HL (bearish shift) or above a LH (bullish shift)? Measure the wick of the previous day’s candle — the wick shows where institutions rejected price. That rejection zone becomes your supply or demand area. The daily bias tells you whether you’re only looking for BUYs or only looking for SELLs on the lower timeframes that day.
STEP 3 — 4 HOUR (Key Levels and Zones)
This is your map for the trading session.
Draw your key psychological levels — on Gold these are every 100 points: 4700, 4800, 4900, 5000. Price always gravitates toward and reacts at these round numbers because that’s where institutions place large orders. Mark your supply zones (areas where price sold off hard from) and demand zones (areas where price bounced hard from). These become your trade locations — you only look to enter when price reaches one of these zones, not in the middle of a range.
STEP 4 — 2 HOUR (Institutional Activity)
This is where you identify what the big players are doing.
Look for institution candles — large body candles that are 2x the average size. These are institutions entering positions. After a large institution candle, price often comes back to mitigate (retest) that candle before continuing. That mitigation point is a high-probability entry. Also look for liquidity sweeps — when price wicks above a recent high or below a recent low and immediately closes back. This is institutions hunting stops before the real move. After a liquidity sweep, the move goes the other direction.
STEP 5 — 1 HOUR (Entry Zone)
Now you’re narrowing down exactly where to enter.
Look for retracements back into the 4H supply or demand zone. If the daily bias is bullish and price pulls back to a 4H demand zone on the 1H, that’s your entry zone. Look for the 1H to show a Break of Structure in your direction — a BOS confirms institutions have shifted. If the trend is already running strong, you can enter on a retest of the broken structure level rather than waiting for a deep pullback.
STEP 6 — 30 MINUTE (Counter Trend Lines and Confirmation)
This refines your entry timing.
Draw a counter trend line against the current move. When price breaks that counter trend line in the direction of your bias, that’s your trigger to prepare for entry. This is also where you confirm SMC concepts — look for a mitigation block, an order block, or a fair value gap that price is filling before continuing your direction.
STEP 7 — 15 MINUTE (Final Entry Confirmation)
Your signal timeframe.
This is where the JRI indicator fires. All 7 conditions need to align — bias, zone, BOS, retest, VWAP, EMA stack, RSI. When the score hits 5, 6, or 7 out of 7 the signal fires. On your funded account only take 6/7 or 7/7. On personal accounts 5/7 is acceptable. The 15m gives you enough detail to see the setup clearly without being too noisy.
STEP 8 — 5 MINUTE and 1 MINUTE (Precision Entry and Scalping)
This is where you time the exact entry.
On the 5m and 1m you’re looking for the same things — liquidity sweeps, institution candles, BOS — but at a micro level. For scalps you enter at the candle HIGH on a BUY or candle LOW on a SELL. Your stop goes below the candle LOW on BUY or above the candle HIGH on SELL with 0.8x ATR buffer. You measure the move in 1:3 risk-reward.
RISK MANAGEMENT RULES — NON NEGOTIABLE
These apply to every single trade no exceptions.
At T1 (1:1 R) — take 50% of your position off. Lock in profit. This is not optional.
At T2 (1:2 R) — move your stop loss to your entry price. You are now in a risk-free trade.
At T3 (1:3 R) — close the remaining position. Full target hit.
Never move your stop loss against you. Never add to a losing position. If you’re in a funded account and the trade hits your SL, that’s the end of that trade. No revenge trading.
THE 7 CONDITIONS YOUR INDICATOR CHECKS
1. Bias — Is the market structure bullish (HH+HL) or bearish (LH+LL)?
2. In Zone — Is price inside a confirmed supply or demand zone?
3. BOS — Did price break a recent structure level in your direction?
4. Retest — Did price come back and test that broken level?
5. vs VWAP — Is price above VWAP for buys, below for sells?
6. EMA Stack — Is EMA 20 above EMA 50 for buys, below for sells?
7. RSI — Is RSI above 50 for buys, below 50 for sells?
All 7 pointing the same direction means institutions are aligned with your trade. That’s when you pull the trigger.
YOUR SESSION SCHEDULE
Your primary window is the NY Open — 6:30am PST. This is when the highest volume hits and the cleanest moves happen. Gold (MGC/GC) and NQ are your instruments. Run your top-down analysis the night before or early morning before the open. Have your levels marked, your bias set, your zones identified. When the open hits you’re ready to execute, not still analyzing.
Sürüm Notları
NEW IN V13Sessions highlighted
NY, London, Asia — color coded on chart
Zone Touch Alert
Fires when price enters zone BEFORE signal
Loss protection
After 2 losses in a row — STOP TRADING label appears
Signal spam fixed
Cooldown now 3x stronger — one box per setup
Score raised
Default min score raised to 6/7 for cleaner signals
Açık kaynak kodlu komut dosyası
Gerçek TradingView ruhuyla, bu komut dosyasının mimarı, yatırımcıların işlevselliğini inceleyip doğrulayabilmesi için onu açık kaynaklı hale getirdi. Yazarı tebrik ederiz! Ücretsiz olarak kullanabilseniz de, kodu yeniden yayınlamanın Topluluk Kurallarımıza tabi olduğunu unutmayın.
Feragatname
Bilgiler ve yayınlar, TradingView tarafından sağlanan veya onaylanan finansal, yatırım, alım satım veya diğer türden tavsiye veya öneriler anlamına gelmez ve teşkil etmez. Kullanım Koşulları bölümünde daha fazlasını okuyun.
Açık kaynak kodlu komut dosyası
Gerçek TradingView ruhuyla, bu komut dosyasının mimarı, yatırımcıların işlevselliğini inceleyip doğrulayabilmesi için onu açık kaynaklı hale getirdi. Yazarı tebrik ederiz! Ücretsiz olarak kullanabilseniz de, kodu yeniden yayınlamanın Topluluk Kurallarımıza tabi olduğunu unutmayın.
Feragatname
Bilgiler ve yayınlar, TradingView tarafından sağlanan veya onaylanan finansal, yatırım, alım satım veya diğer türden tavsiye veya öneriler anlamına gelmez ve teşkil etmez. Kullanım Koşulları bölümünde daha fazlasını okuyun.