EZ$ PB Blake v1.0
EZ$ PB Blake is a standalone indicator built around PB Blake’s four-step trading model:
HTF Bias + Draw on Liquidity → Valid Key Level → Highest-TF IFVG Confirmation → Entry
It is designed to keep the model clean and structured rather than filling the chart with every possible FVG or ICT concept.
The indicator first determines whether the market is bullish or bearish by looking at how Daily, 4H, 1H and optional 15M FVGs are being respected or disrespected. It then identifies the likely BSL or SSL draw on liquidity.
Next, it looks for valid PB-style key levels from the 3M, 5M, 15M, 30M, 1H and 4H, including FVGs, ITL/ITH levels, CISDs and rejection blocks.
Once price reaches a valid key level, the indicator identifies the manipulation leg and searches the 1M through 5M for the highest-timeframe IFVG inside that leg.
The actual signal only appears after the proper IFVG timeframe gets a confirmed body close through the gap:
PB LONG
or
PB SHORT
Settings Guide
1. HTF Bias + Draw on Liquidity
Bias Mode
Auto FVG Respect — recommended
Manual Bullish
Manual Bearish
Auto mode scores the 1D / 4H / 1H / 15M based on FVG respect/disrespect.
Minimum Absolute Bias Score
Default: 2
Higher number = stricter bias
I would leave this at 2 initially
DOL Swing TF
Default: 1H
Used to locate the swing high/low serving as the likely draw.
You'll see:
BSL • DOL for bullish
SSL • DOL for bearish
2. Valid Key Levels
Default timeframes are all enabled:
3M / 5M / 15M / 30M / 1H / 4H
The script can select:
FVG
ITL / ITH
CISD
RB = Rejection Block
I recommend leaving all of these timeframe toggles ON initially because PB uses different key-level timeframes depending on the setup.
The dashboard might say something like:
KEY: 15M FVG
or
KEY: 1H RB
3. IFVG Confirmation
This is the most important section for the actual entry.
Default:
1M / 2M / 3M / 4M / 5M = ON
The indicator searches those timeframes and selects the highest-timeframe IFVG inside the manipulation leg.
Example:
If the leg contains:
1M IFVG ✅
2M IFVG ✅
3M IFVG ✅
4M IFVG ❌
5M IFVG ❌
then the script waits for the:
3M IFVG
—not the 1M.
The dashboard will show:
WAIT 3M CLOSE
Then a confirmed body close through that IFVG can generate the signal.
I intentionally left the 30-second IFVG out of the default model.
4. Execution / Risk
Golden Hour
Default: 9:30–11:00 AM ET
Recommended: ON
Maximum Signals per Session
Default: 2
That matches the spirit of PB's limited-trade approach.
Show Safest Swing Stop Reference
ON by default
Displays the manipulation swing as a visual stop reference.
This is only a reference, not an automatic order.
Dashboard
The bottom-right dashboard is basically your checklist:
PB BIAS — Bullish / Bearish / Wait
1D / 4H — individual HTF states
1H / 15M — additional bias context
DOL — BSL or SSL
KEY — active PB key level
MODEL — current setup stage
SESSION — Golden Hour or Outside
SIGNALS — how many PB signals have fired
The most useful MODEL states are:
WAIT BIAS
→ WAIT KEY
→ WAIT TOUCH
→ WAIT 1M/2M/3M/4M/5M CLOSE
→ PB LONG / PB SHORT
So the simplest way to use the indicator is:
Let the dashboard walk you through PB Blake's process instead of manually hunting every concept on the chart.
HTF Bias + Draw on Liquidity → Valid Key Level → Highest-TF IFVG Confirmation → Entry
It is designed to keep the model clean and structured rather than filling the chart with every possible FVG or ICT concept.
The indicator first determines whether the market is bullish or bearish by looking at how Daily, 4H, 1H and optional 15M FVGs are being respected or disrespected. It then identifies the likely BSL or SSL draw on liquidity.
Next, it looks for valid PB-style key levels from the 3M, 5M, 15M, 30M, 1H and 4H, including FVGs, ITL/ITH levels, CISDs and rejection blocks.
Once price reaches a valid key level, the indicator identifies the manipulation leg and searches the 1M through 5M for the highest-timeframe IFVG inside that leg.
The actual signal only appears after the proper IFVG timeframe gets a confirmed body close through the gap:
PB LONG
or
PB SHORT
Settings Guide
1. HTF Bias + Draw on Liquidity
Bias Mode
Auto FVG Respect — recommended
Manual Bullish
Manual Bearish
Auto mode scores the 1D / 4H / 1H / 15M based on FVG respect/disrespect.
Minimum Absolute Bias Score
Default: 2
Higher number = stricter bias
I would leave this at 2 initially
DOL Swing TF
Default: 1H
Used to locate the swing high/low serving as the likely draw.
You'll see:
BSL • DOL for bullish
SSL • DOL for bearish
2. Valid Key Levels
Default timeframes are all enabled:
3M / 5M / 15M / 30M / 1H / 4H
The script can select:
FVG
ITL / ITH
CISD
RB = Rejection Block
I recommend leaving all of these timeframe toggles ON initially because PB uses different key-level timeframes depending on the setup.
The dashboard might say something like:
KEY: 15M FVG
or
KEY: 1H RB
3. IFVG Confirmation
This is the most important section for the actual entry.
Default:
1M / 2M / 3M / 4M / 5M = ON
The indicator searches those timeframes and selects the highest-timeframe IFVG inside the manipulation leg.
Example:
If the leg contains:
1M IFVG ✅
2M IFVG ✅
3M IFVG ✅
4M IFVG ❌
5M IFVG ❌
then the script waits for the:
3M IFVG
—not the 1M.
The dashboard will show:
WAIT 3M CLOSE
Then a confirmed body close through that IFVG can generate the signal.
I intentionally left the 30-second IFVG out of the default model.
4. Execution / Risk
Golden Hour
Default: 9:30–11:00 AM ET
Recommended: ON
Maximum Signals per Session
Default: 2
That matches the spirit of PB's limited-trade approach.
Show Safest Swing Stop Reference
ON by default
Displays the manipulation swing as a visual stop reference.
This is only a reference, not an automatic order.
Dashboard
The bottom-right dashboard is basically your checklist:
PB BIAS — Bullish / Bearish / Wait
1D / 4H — individual HTF states
1H / 15M — additional bias context
DOL — BSL or SSL
KEY — active PB key level
MODEL — current setup stage
SESSION — Golden Hour or Outside
SIGNALS — how many PB signals have fired
The most useful MODEL states are:
WAIT BIAS
→ WAIT KEY
→ WAIT TOUCH
→ WAIT 1M/2M/3M/4M/5M CLOSE
→ PB LONG / PB SHORT
So the simplest way to use the indicator is:
Let the dashboard walk you through PB Blake's process instead of manually hunting every concept on the chart.
Feragatname
Bilgiler ve yayınlar, TradingView tarafından sağlanan veya onaylanan finansal, yatırım, alım satım veya diğer türden tavsiye veya öneriler anlamına gelmez ve teşkil etmez. Kullanım Koşulları bölümünde daha fazlasını okuyun.
Feragatname
Bilgiler ve yayınlar, TradingView tarafından sağlanan veya onaylanan finansal, yatırım, alım satım veya diğer türden tavsiye veya öneriler anlamına gelmez ve teşkil etmez. Kullanım Koşulları bölümünde daha fazlasını okuyun.