Chỉ báo và chiến lược

MarketCraft FX - Liquidity Matrix V1.1 MARKETCRAFT FX – LIQUIDITY MATRIX V1.1 The MarketCraft FX Liquidity Matrix is a free liquidity-mapping indicator designed to identify areas where buy-side and sell-side liquidity may be resting. Rather than displaying every minor swing, the indicator evaluates confirmed pivot structure, relative volume and displacement away from the level. Qualified liquidity zones are then displayed clearly on the chart, helping traders identify potential targets, reaction areas and liquidity events. KEY FEATURES • Buy-Side Liquidity (BSL) zones above confirmed swing highs • Sell-Side Liquidity (SSL) zones below confirmed swing lows • Dual structural and relative-volume detection • PRIMARY, STRONG and MAJOR zone classifications • ATR-based zone depth • Optional dynamic zone sizing • Nearby-level merging to reduce chart clutter • Zones extend automatically beyond current price action • Separate liquidity-sweep and close-through identification • Nearest BSL and SSL displayed in a compact dashboard • Configurable colours, transparency and display limits • Alerts for approaches, sweeps and candle close-through events • Suitable for light and dark chart backgrounds HOW THE LIQUIDITY ENGINE WORKS A liquidity zone begins with a confirmed swing high or swing low. The indicator then evaluates the quality of that swing using two independent qualification paths: 1. Structural displacement away from the swing 2. Relative volume surrounding the liquidity origin This dual-detection method allows a meaningful structural level to qualify even when market volume is relatively quiet. It can also identify volume-backed liquidity that may not produce an unusually large immediate displacement. ZONE CLASSIFICATIONS PRIMARY A confirmed liquidity-bearing swing that meets the minimum qualification requirements. STRONG A higher-quality level supported by additional displacement, relative volume or price-action confirmation. MAJOR A high-scoring liquidity level with multiple supporting factors. These zones represent the strongest levels identified by the engine. READING THE ZONES BSL zones appear above price and represent areas where liquidity may be resting beyond previous highs. SSL zones appear below price and represent areas where liquidity may be resting beyond previous lows. Each active zone extends beyond current price action by the selected number of bars. The default extension is 20 bars. The zone remains live and continues moving forward until its outer boundary is reached. ZONE STATES FRESH The liquidity zone has been created and has not yet been approached or swept. APPROACHING Price has moved within the selected ATR distance of an active liquidity zone. LIQUIDITY SWEPT Price has wicked through the outer boundary of the zone. The zone stops extending at the sweep candle and changes to a dashed historical level. CLOSE-THROUGH A candle has closed beyond the outer boundary. This is separated from a wick-only sweep because it may indicate acceptance beyond the liquidity zone rather than an immediate rejection. COMPACT DASHBOARD The dashboard displays: • Current draw on liquidity • Nearest active BSL • Nearest active SSL • Strength of each nearest zone • Number of retained zones • Latest liquidity event IMPORTANT SETTINGS Minimum Zone Grade controls the overall quality of zones displayed. Dual Structural + Volume Detection allows zones to qualify through either displacement or relative volume. Swing Length and Confirmation Bars control how significant a swing must be before it is confirmed. Base Zone Depth controls zone thickness using ATR. Merge Nearby Levels combines levels forming within the selected ATR distance. Extend Past Current Price controls how far active zones project beyond the latest candle. Retain Swept Zones determines whether completed liquidity events remain visible for historical analysis. TRADING APPLICATION The indicator can be used to help identify: • Potential draws on liquidity • Areas above highs or below lows where stops may be resting • Potential reaction points • Liquidity sweeps • Failed sweeps and close-through events • Confluence with market structure, order blocks, supply and demand, Fibonacci levels or higher-timeframe analysis Liquidity zones should not be treated as automatic entry signals. A zone identifies an area of interest; traders should use their own confirmation process before making a trading decision. MARKETCRAFT FX Craft Your Edge. Master the Market. This indicator is an original MarketCraft FX development created as a free educational and chart-analysis tool. DISCLAIMER This indicator is provided for educational and informational purposes only. It does not constitute financial advice, investment advice or a recommendation to buy or sell any financial instrument. No indicator can predict future market movements or guarantee profitable results. Liquidity zones may fail, price may trade through them, and historical performance does not guarantee future performance. Always conduct your own analysis and use appropriate risk management.

Chỉ báo

của thefxtraderuk

MACD Matrix [Quantum Algo]MACD Matrix ═══════════════════════════════════════════════ 🔶 OVERVIEW MACD Matrix reads the Moving Average Convergence Divergence as a complete momentum system rather than a single line and histogram. It classifies momentum into four quadrants instead of one sign, aligns four timeframes into a live matrix with a scored consensus, detects histogram divergence and draws it on both the oscillator and the price candles, tracks histogram compression before expansion, and paints a momentum river through price so the entire reading lives on the chart — not only in the pane below it. The result is a MACD you can read from the candles alone: the river's color tells you the quadrant, the aura tells you whether momentum is expanding or fading, gold beacons mark full multi-timeframe alignment, and every signal carries its own historical record on the exact symbol you are trading. ═══════════════════════════════════════════════ 🔶 WHAT IS MACD? The Moving Average Convergence Divergence, created by Gerald Appel, measures momentum as the distance between a fast and a slow exponential moving average. A signal line smooths that distance, and the histogram — introduced by Thomas Aspray — shows the gap between the two. MACD above zero means the fast average leads the slow one (bullish regime); the histogram rising means momentum is accelerating. ═══════════════════════════════════════════════ 🔶 WHAT ARE THE FOUR MACD QUADRANTS? Most traders read MACD as bullish or bearish. It actually has four distinct states, and the difference between them is where the money is: — Expanding ▲: above zero and the histogram rising — momentum accelerating in an uptrend. — Fading ▲: above zero and the histogram falling — the uptrend losing thrust, the earliest warning. — Expanding ▼: below zero and the histogram falling — momentum accelerating in a downtrend. — Fading ▼: below zero and the histogram rising — the downtrend losing thrust, the earliest turn. MACD Matrix names the quadrant on every bar, colors the river and the aura by it, and stamps it into every signal's tooltip. ═══════════════════════════════════════════════ 🔶 WHY IS THIS ORIGINAL? 1. The quadrant engine. Four momentum phases instead of two, made visible on the price chart through the momentum river and aura, so fading momentum is caught before the sign ever flips. 2. The timeframe matrix. Four configurable timeframes, each read as side-of-zero × expanding-or-fading, with a consensus score. A gold beacon prints on price the moment all four align with expanding momentum — a threshold event, not a vague "trend agreement." 3. Dual-canvas divergence. Histogram divergences are drawn as connectors in the pane AND as dashed twins across the corresponding price pivots on the chart, so the divergence is visible exactly where you trade it. 4. The histogram squeeze. Histogram amplitude is ranked inside its own recent history; when it compresses below a low percentile the momentum is coiled, marked with gold dots, and the expansion out of the coil fires a directional release signal — a compression concept almost never applied to MACD. 5. Signal families with per-symbol records. Zero-line crosses, early signal crosses on the correct side of zero, divergences and squeeze releases are tracked as separate families, each with ten-bar outcome statistics shrunk toward neutral at small samples and a Wilson lower bound — quoted in every tooltip and on the dashboard. ═══════════════════════════════════════════════ 🔶 HOW IT WORKS — MACD, signal and histogram are computed from configurable lengths; the quadrant is derived from the sign of MACD and the direction of the histogram. — Four higher-timeframe MACD states are requested without lookahead and scored into the matrix. — Histogram pivots are compared against price pivots to detect regular divergences, drawn on both canvases. — Histogram amplitude is ranked against its own history for the squeeze; a mature coil that expands fires a release. — Every signal family feeds its own first-in-first-out outcome samples; statistics are reported with sample counts. Signals are evaluated on confirmed bars and do not repaint. Higher-timeframe matrix rows finalize when their own bar closes, as with any multi-timeframe reading. All drawings are capped. ═══════════════════════════════════════════════ 🔶 HOW TO USE IT — Trade the quadrant, not the sign: Expanding phases favor continuation entries; Fading phases favor taking profit or tightening risk, and they precede most zero-line crosses. — Use the matrix as a filter: a 4/4 beacon is the highest-conviction environment; a divided matrix (2/4) warns that timeframes disagree. — Divergence on the candles: when the dashed price line and the pane connector appear together, you have a momentum-versus-price disagreement located precisely on structure. — Watch the coil: a long squeeze followed by a release is the setup for expansion; the R family record tells you how reliably releases have followed through here. — Works on all markets and timeframes; configure the four matrix timeframes to match your trading horizon. ═══════════════════════════════════════════════ 🔶 SETTINGS — MACD: fast, slow and signal lengths. — Timeframe Matrix: four timeframes. — Signals & Squeeze: divergence pivot length, squeeze window and percentile, cooldown, signal visibility. — Statistics: sample cap, minimum samples, shrinkage strength, Wilson z-score. — Visuals and dashboard: river and aura toggles, river length, full color and position control. ═══════════════════════════════════════════════ 🔶 ALERTS — Matrix Aligned Bullish / Bearish — all four timeframes aligned with expanding momentum. — Zero-Line Cross — MACD crossed zero. — Histogram Divergence — a divergence printed. — Squeeze Release — the histogram expanded out of its coil. ═══════════════════════════════════════════════ 🔶 FAQ Q: Does it repaint? A: Signals are evaluated on confirmed bars and never change once printed. The higher-timeframe rows of the matrix update while their own bar is open and finalize at its close — this is inherent to any multi-timeframe reading, and no lookahead is used. Q: How is this different from a standard MACD? A: A standard MACD shows one line, one signal and one histogram in a pane. This tool adds the quadrant classification, the four-timeframe matrix and beacons, divergence drawn on the price chart itself, the histogram squeeze, the momentum river and aura on price, and per-family statistics. Q: What does the momentum river represent? A: A short exponential average of price colored by the current MACD quadrant. Its purpose is purely to carry the momentum reading onto the candles — bright when momentum expands, dimmed when it fades — so you can read momentum without looking away from price. Q: What do the family percentages mean? A: The share of past signals in that family after which price had moved favorably ten bars later, on the current symbol and timeframe, shrunk toward fifty percent at small samples. They describe history — they are not predictions. Q: Which settings should I change first? A: The four matrix timeframes, so the matrix reflects your own trading horizons. The MACD lengths follow the classic 12, 26, 9 defaults. ═══════════════════════════════════════════════ 🔶 CREDITS The Moving Average Convergence Divergence is by Gerald Appel; the MACD histogram is by Thomas Aspray (1986). The Wilson score interval is by Edwin B. Wilson (1927). The quadrant engine, timeframe matrix and beacon logic, dual-canvas divergence rendering, histogram squeeze, per-symbol statistics and all code in this script are original work — no third-party or open-source script code was reused. ═══════════════════════════════════════════════ 🔶 LIMITATIONS — MACD is a lagging momentum measure; the quadrant engine reduces but cannot eliminate lag. — Divergences can extend before resolving; the family record exists to quantify this on your chart. — Statistics describe the current chart's history only; past frequencies never guarantee future outcomes. ═══════════════════════════════════════════════ 🔶 DISCLAIMER This indicator is a research and charting tool provided for educational purposes. It is not financial advice, and nothing it displays is a recommendation to buy or sell any asset. Trading involves substantial risk of loss. Always do your own analysis and manage risk responsibly.

Chỉ báo

của Quantum-Algo

3Candle Multi Timeframe 3CandlePro 3CandlePro is a level-based price-action confirmation indicator designed for 5-minute trading. It monitors up to 8 custom price levels and looks for structured setups when price interacts with these zones. Key features: Up to 8 custom Long/Short levels Reaction, Breakout, Retest Continuation, Reclaim and Trap setups Single-candle and Merged 10-minute confirmation POC confirmation: Close > POC for Long / Close < POC for Short Optional VWAP and EMA 8/21 confluence scoring Setup quality scoring Reaction Test and HTF Continuation workflows Automatic alerts when price reaches any configured zone Confirmed setup alerts at candle close 60-second level-alert cooldown The concept is simple: Level → Price Interaction → Confirmation → Score → Signal CandlePro is designed as a confirmation tool for predefined trading levels, rather than a standalone signal generator.

Chỉ báo

của marcelofibonacci

TMO Dual Timeframe Strategy [Hary]Strategy — TMO Dual Timeframe Strategy Strategy version of the TMO Dual Timeframe system: enters long/short on HTM-confirmed ETM zero-line crosses, with configurable stop-loss and take-profit (percent or pips) applied to the real fill price. Long/short trading can be toggled independently, with an adjustable backtest date range. Useful for validating the signal logic before using the indicator for live discretionary trading. Backtest results don't guarantee future performance. Commission and slippage are configurable in the strategy settings — set them to match your broker before drawing conclusions.

Chiến lược

của hary349veo3

Fisher Transform Turning Points [RC Tools]RC Tools — Fisher Transform Turning Points ──────────────────────────────────────────────────────────────────── █ OVERVIEW Most oscillators produce a roughly bell-curve distribution of values, which means they spend a lot of time hovering near their own extremes without committing one way or the other — turning points end up gradual and easy to miss. The Fisher Transform, developed by John Ehlers, fixes this by re-shaping the distribution itself: it converts a naturally Gaussian-ish read into one with much sharper, more decisive swings, so genuine turning points stand out rather than blur together. █ WHAT IT DOES Computes the Fisher Transform of price's position within its recent high/low range and classifies each confirmed bar as Bullish or Bearish on a zero-line crossover. Plots a 4-colour momentum histogram (Expansion, Slowdown, Contraction, Recovery) showing not just direction but whether momentum is accelerating or fading, colours the chart background by the confirmed state, and shows a table with the current state, how long price has been in it, and historical base rates (average forward return and win rate) for each state. █ THE THEORY BEHIND IT Most price-derived oscillators (RSI, Stochastic, and similar) are bounded and tend to spend a disproportionate amount of time in the middle of their range, with actual extremes reached only briefly. Ehlers' insight was that if you first normalise price's position within its recent range to roughly -1 to +1, then run that through the inverse hyperbolic tangent function, you get an output whose distribution is much closer to genuinely Gaussian — which sounds abstract, but has a very practical effect: the statistic moves through its extremes quickly rather than lingering, producing sharper, more decisive turning points instead of a gradual roll-over. █ HOW IT IS CALCULATED 1. Normalise price's position within its recent high/low range (over the Length window) to roughly -1 to +1, damped against the prior bar's reading to reduce noise. 2. Run that normalised value through 0.5 × ln((1 + x) / (1 - x)) — the inverse hyperbolic tangent, via a standard logarithmic identity — again damped against the prior output. 3. The resulting Fish value crossing above zero is classified Bullish; crossing below zero is classified Bearish. Between crossovers, the classification holds. 4. Separately, a 4-colour momentum state (Expansion/Slowdown/Contraction/Recovery) is derived from Fish's bar-to-bar change — this is a cosmetic diagnostic layer and does not affect the Bullish/Bearish classification itself. Note: a trigger-line crossover (Fish against its own lagged value) was tested during development and found too whipsaw-prone for this technique — the zero-line crossover used here produced meaningfully cleaner classification. Classification occurs ONLY on confirmed bar close — the plotted Fish value, the background colour and the table all update together, so nothing here can disagree mid-bar or flip back and forth as the current bar forms. █ SETTINGS & CONFIGURATION • Length (default 10, the classical value from Ehlers' original publication) — the rolling high/low window used for the price-position read • Table visibility, position and colours are fully configurable; the main-chart background painting can be toggled off if you only want the statistics pane • Forward Return Window (default 20 bars) — the horizon used for the base-rate table █ HOW TO USE IT Use it as a turning-point filter alongside your existing tools, not as a standalone entry signal. Because the transform is specifically built to sharpen turning points, it tends to react faster than smoother oscillators — useful for catching a genuine reversal early, at the cost of more false starts in choppy conditions. Check the base-rate table's sample count before treating any single state as meaningfully predictive. Works on any asset and timeframe with sufficient history for the Length window. █ LIMITATIONS • Fisher Transform is a NORMALISED price-position statistic, not a measure of trend strength or magnitude. Any use of it as a precision reversal forecast is a misuse. • The sharp, decisive turning points that make this technique distinctive also mean it can whipsaw in genuinely choppy, range-bound conditions. • The high/low window resets its frame of reference every Length bars; a short length reacts fast but is noisier, a long length is smoother but slower to reflect a genuine change. • The 4-colour momentum state is a cosmetic diagnostic layered on top of Fish's bar-to-bar change — it does not affect the Bullish/Bearish classification or the base-rate table. • Historical base-rate stats need a meaningful sample count (check N) before being trusted. • This script does NOT repaint. All classification updates on confirmed bar close only. █ DISCLAIMER For educational and informational purposes only. Nothing here is financial advice. Past behaviour of any turning-point state does not indicate future results. Trade at your own risk.

Chỉ báo

Atty Noise Area Implements the Noise Area from Zarattini, Barbon, and Marchioro's paper "Beat the Market: An Effective Intraday Momentum Strategy for S&P 500 ETF (SPY)." For each time-of-day bucket in regular US market hours, it builds a volatility band from how far that same bucket has moved on prior sessions, then flags when price breaks outside it. Requires a minute-based intraday chart. Needs 2-60 prior sessions of lookback (default 14) and by default requires the full lookback before it will plot. The method is the paper's; this implementation is ours. The published edge in the paper was measured on SPY only - it has not been validated here on other symbols, so treat readings on other tickers as descriptive, not evidence of edge.

Chỉ báo

Atty Algo Trend Pro A dual-moving-average trend ribbon. Two MAs (default 4/9) ride with price, and the space between them is colored as one continuum, not three fixed buckets: Green - fast MA above slow MA by more than the neutral zone Red - fast MA below slow MA by more than the neutral zone Yellow - the two are inside the neutral zone, indecision / turn bar Color saturates toward full green or red as the gap widens, so trend strength is visible at a glance. The neutral zone is measured in ATR, not fixed points, so one setting works across futures and stocks. Pullbacks that reach the ribbon and hold are continuation signals. Visualization tool only, not a signal generator. No backtest has been run and it carries no performance claims - use it to read trend context, not as a standalone entry trigger.

Chỉ báo

Atty Short Volume Plots daily short-sale volume as a percentage of total volume, below the chart, for US/FINRA-reported symbols. Uses TradingView's per-symbol short-volume feed, so it auto-updates daily. IMPORTANT: this is SHORT SALE VOLUME, not SHORT INTEREST (percent of float currently sold short). They are different metrics that get casually confused. Short-sale volume includes routine market-maker and algorithmic activity and often runs 30-50% on an entirely ordinary day — it is a daily trading-activity metric, not a measure of how much of a stock's float is held short. For true short interest, check a source like FINRA's official short interest report. Updates once per day (FINRA daily resolution). Not available for OTC or non-US-listed symbols. Includes a smoothed average line, an adjustable elevated-level reference line, and a small table showing the latest reading and shares float.

Chỉ báo

Relative Strength vs Benchmark [Mansfield RS]What this does This indicator measures whether a stock is outperforming or underperforming a chosen benchmark index, using the Mansfield Relative Strength method — a technique long used by momentum/trend traders but rarely available as a simple, ready-to-use tool. Why not just plot a price ratio? A raw stock-price-to-index-price ratio only tells you if the ratio is rising or falling — the actual number means nothing on its own, and it's easy to misread. Mansfield RS fixes this by measuring how far that ratio has moved away from its own recent average, giving you a clean oscillator that centers on a zero line: Above zero (green) — the stock is outperforming its own recent relative trend against the benchmark. Below zero (red) — it's underperforming. The zero-line cross is the actual signal — marked with triangles — not the absolute level. Settings Benchmark / Index — pick any index or stock to compare against (defaults to NSE:NIFTY, but works with any sector index or benchmark you want). Smoothing MA Length (default 200) — controls how far back the "recent average" baseline looks. Shorter = faster, noisier signals. Longer = slower, more meaningful regime changes. How to use it Best used as context alongside your own price-action or trend analysis — not as a standalone buy/sell trigger. A bullish setup that's also showing strong relative strength is a meaningfully different situation than the same setup on a stock quietly underperforming the market. Works especially well for filtering which names in a watchlist deserve attention first. Alerts Built-in alerts fire when relative strength turns positive or negative (zero-line cross). Disclaimer This is a context/screening tool, not a standalone trading signal. Not financial advice — always confirm with your own analysis and risk management.

Chỉ báo

của WaveXplorer

Futures ATR Risk & Position Sizer ATR Risk & Position Sizer What it does This tool answers one question before every trade: "Given how much I'm willing to lose and how volatile this market is right now, how many contracts can I actually take?" Instead of using a fixed stop distance, the stop is derived from the Average True Range (ATR) of the instrument, so position size automatically shrinks when volatility rises and grows when it falls — the dollar risk stays constant, the contract count adapts. The asset is auto-detected from the chart you're viewing. You only choose whether you're trading the Mini or Micro version of it. How the calculation works Stop distance = ATR(length) × Multiplier - ATR length defaults to 14 (configurable). - The multiplier (default 1.5) controls how wide the stop is relative to current volatility — this is what makes the risk "dynamic": as ATR expands or contracts, so does the stop, and so does the resulting position size. Tick rounding — a stop can only be placed at a valid price increment (tick), so the raw ATR-based distance is rounded down to the nearest whole tick for the detected instrument before anything else is calculated. For example, on ES (tick = 0.25), a raw distance of 10.4 points becomes 10.25 points (41 ticks) — never a value that couldn't actually be set as a stop order. Risk per contract = Stop Distance (points) × Dollar value per point (for the selected Mini/Micro size). Contracts allowed = floor(Max Risk $ ÷ Risk per contract), then optionally rounded down to the nearest even number (see below). Max Risk (displayed) is recalculated from the final, rounded contract count — so it reflects your actual exposure, which will always be at or under your configured max risk, never over it. Auto-detection The script reads the chart's root symbol (works with both continuous contracts like ES1! and dated contracts like ESZ2025) and matches it — along with its known Micro ticker — against a built-in list of instruments. If the symbol isn't recognized, the table is replaced with a clear red "Unsupported Asset" warning instead of showing incorrect numbers. If the asset is recognized but the size you selected (Mini/Micro) doesn't actually exist for that instrument (e.g. there's no Micro Platinum), you'll get an orange warning instead of silently wrong output. Supported instruments and their specs: Asset | Root / Micro ticker(s) | Tick Size | Mini $/pt | Micro $/pt E-mini S&P 500 | ES / MES | 0.25 | $50 | $5 E-mini Nasdaq 100 | NQ / MNQ | 0.25 | $20 | $2 E-mini Dow | YM / MYM | 1.0 | $5 | $0.50 E-mini Russell 2000 | RTY / M2K | 0.10 | $50 | $5 Gold | GC / MGC (also XAUUSD, GOLD) | 0.10 | $100 | $10 Silver | SI / SIL (also XAGUSD) | 0.005 | $5,000 | $1,000 Platinum | PL | 0.10 | $50 | N/A Copper | HG / MHG | 0.0005 | $25,000 | $2,500 Crude Oil | CL / MCL | 0.01 | $1,000 | $100 Natural Gas | NG / MNG | 0.001 | $10,000 | $1,000 Heating Oil | HO | 0.0001 | $42,000 | N/A RBOB Gasoline | RB | 0.0001 | $42,000 | N/A US Dollar Index | DX | 0.005 | $1,000 | N/A Euro FX | 6E / M6E | 0.00005 | $125,000 | $12,500 British Pound | 6B / M6B | 0.0001 | $62,500 | $6,250 Australian Dollar | 6A / M6A | 0.0001 | $100,000 | $10,000 30-Yr T-Bond | ZB | 1/32 (0.03125) | $1,000 | N/A 10-Yr T-Note | ZN | 1/64 (0.015625) | $1,000 | N/A Wheat | ZW | 0.25 | $50 | N/A Soybeans | ZS | 0.25 | $50 | N/A Corn | ZC | 0.25 | $50 | N/A Cotton | CT | 0.01 | $500 | N/A Sugar | SB | 0.01 | $1,120 | N/A Coffee | KC | 0.05 | $375 | N/A Cocoa | CC | 1.0 | $10 | N/A "N/A" means that instrument currently has no Micro-sized version on the exchange — the script will flag this rather than show a value. Inputs Max Risk Amount ($) – the dollar amount you're willing to risk on the trade. ATR Length – lookback period for ATR (default 14). ATR Multiplier – multiplies ATR to set the stop distance (default 1.5). Force Even Number of Contracts – when enabled (default), an odd contract count is rounded down to the nearest even number; disable to allow any whole number. Contract Type – Mini or Micro. Pick whichever you actually trade; the asset detection is independent of this. Table Position / Text Size – purely cosmetic. Reading the table Header – detected asset, contract size, ATR multiplier in use, and your configured risk amount. Contracts Allowed – the final, tick-valid, (optionally) even-rounded contract count. Stop Loss Distance – the tick-rounded stop distance, shown in both points and whole ticks. Max Risk ($) – your actual dollar risk at that contract count — always at or below your configured max risk. Notes & disclaimer Contract specifications (tick size, point value) reflect standard CME/ICE specs at the time of publishing. Exchanges occasionally revise these — please verify against your broker/exchange before relying on this for live sizing. This indicator does not generate entry or exit signals. It is a risk-management and position-sizing calculator only. Nothing in this script constitutes financial advice. Futures trading involves substantial risk of loss and is not suitable for all investors. Past volatility is not indicative of future volatility.

Chỉ báo

của pascallapointe

Session Levels Pro [PineLogic]Session Levels Pro draws the reference prices intraday traders mark up by hand every morning - previous day and previous week extremes, today's open, and the opening range - and keeps them updated on one clean, non-repainting overlay. WHAT IT PLOTS PDH / PDL / PDC - previous day high, low and close OPEN - today's opening price PWH / PWL - previous week high and low ORH / ORL - the opening range high and low, measured over a configurable number of minutes from the session open (default 15) Each level is a single line with a right-hand label showing the level name and its exact price, so you can read the number without hovering. HOW IT WORKS Daily and weekly values are pulled with request.security() using lookahead together with a one-bar offset (high , low , close ). That combination is the correct non-repainting idiom: it returns only the completed prior period, so a level never changes after the fact, and what you see on history is what you would have seen live. The opening range is tracked forward from each new daily bar. While the elapsed time is inside your chosen window the running high and low expand; once the window closes, ORH and ORL are fixed for the rest of the session. The opening range only appears on intraday timeframes, since it has no meaning on daily and above. Levels are drawn once and repositioned on the last bar rather than redrawn per bar, which keeps the object count flat regardless of history length. HOW TO USE IT Most intraday approaches treat these prices as the day's decision points: a clean break and hold above PDH or the opening range high is continuation, a rejection back inside is a fade, and PWH/PWL frame the wider weekly context. The script marks the levels; it does not tell you which way to trade them. ALERTS Six alertcondition entries are included - break above/below PDH, PWH and ORH, and their downside equivalents. Create the alert from the chart and pick the condition you want. SETTINGS Toggle every level group independently (daily, weekly, opening range) Opening range length in minutes, 1-240 Colours for high, low, neutral and opening-range levels How far to the right the lines and labels extend NOTES Non-repainting by construction, as described above. Previous-day and previous-week values depend on the symbol's session definition, so they follow whatever the exchange feed reports. Works on any symbol; the opening range needs an intraday timeframe. Open-source - read the code, change it, use it.

Chỉ báo

của aleviajes

Consolidation Breakout with Volume Confirmation [Daily]What this does This indicator detects consolidation zones on price charts and flags breakouts confirmed by volume — in both directions (bullish breakouts and bearish breakdowns). Methodology Scans a flexible lookback window (10–30 bars, adjustable) for the tightest qualifying price range, so it captures both short flags and multi-week bases without needing separate settings for each. A zone is drawn once a window's high-low range falls under a configurable tightness threshold (default 8%). Zones where average volume during consolidation is below its own 50-bar baseline are marked in green ("volume dry-up") as a soft indicator of higher conviction — this is informational, not a hard filter. A breakout fires on a close beyond the zone boundary, confirmed by volume at least 1.5x (configurable) the zone's average — symmetric logic for both long breakouts and short breakdowns. A cooldown period after each breakout reduces false re-triggering during choppy conditions. Each breakout label also tags candle quality (strong/weak close within the bar's range) and whether the move gapped through the zone or ground through it intraday — additional price-action context alongside the volume read. Timeframe Designed and tested on the Daily timeframe. All settings (lookback, cooldown, volume baseline) are counted in bars, so they do not scale automatically across timeframes — a 5-bar cooldown means 5 trading days on Daily, but a very different real-world duration on 4H, Weekly, or other timeframes. If you use this on a different timeframe, re-tune the inputs rather than relying on the defaults. Alerts Built-in alert conditions for both bullish breakouts and bearish breakdowns — set once per chart to get notified without watching live. Disclaimer This is a screening/context tool, not a standalone buy/sell signal. All thresholds are adjustable in settings — test and tune them for the instruments you trade. Always confirm with your own analysis and risk management. Not financial advice.

Chỉ báo

của WaveXplorer

Market Structure BOS/CHoCH + Break Follow-Through [ForexCracked]🔵 OVERVIEW Most market structure indicators stop at the break. This one keeps counting after it. It draws the structure the way you already read it: confirmed swing highs and lows tagged HH, HL, LH and LL, a solid line at the level that would flip the current structure, and a BOS or CHoCH label the moment a bar closes through a swing. Then it does the part most structure tools stop short of. For every break it watches what price did next, files the outcome, and prints the counted result on the chart with the sample size next to it. So the label on a break does not just say BOS. It says BOS, and that on this chart breaks like this one reached 1 ATR beyond the level before snapping back 116 times out of the last 200. 🔵 THE ANSWER IS THERE BEFORE THE BREAK The two live levels, the last confirmed swing high and swing low that price has not yet closed through, are drawn as blocks at the right edge of the chart, teal above price and pink below. Each block is captioned with the break it would be under the current structure (BOS or CHoCH), the price, the distance, and what breaks of that kind did here: "BOS above 1.08420 · 12p · 1.0 ATR reached 116/200 (58%) · typical run to 1.08790". The block's height is not decoration. It is the measured median run after breaks of that class on this symbol, so the top of the teal block is a price that breaks like this one typically reached. Medians print from eight samples and percentages from the minimum n. Below that the block falls back to the follow-through distance and its caption reads "finish line at" instead of "typical run to". A block never draws thinner than the minimum block height, and when that floor is what sets its height the caption reads "run floor at". 🔵 HOW A BREAK IS MEASURED A break is a bar that closes through a live swing level. It is a BOS if it goes with the current structure and a CHoCH if it goes against it and flips it. From the next bar the script runs a race with two finish lines the same distance from the level: 1 ATR beyond it in the break direction, and 1 ATR back through it on the other side. ATR is frozen at the break bar so later volatility cannot move the finish lines. Whichever is touched first decides the outcome: reached, or snapped back. If one bar touches both lines it is filed as snapped back, the conservative reading. If neither is touched within 30 bars the outcome is filed as neither. Nothing is estimated and nothing is fitted. Every figure is a count of price events on the chart in front of you, over the last 200 filed breaks of that class, and the n printed beside it is the real count. Wick-only breaks, where a bar trades through a level but closes back inside, are measured with the same race in their own class. They are never drawn as events (the level's block border turns dashed once it has been wicked), but their number sits on the level's caption, so "should I wait for the close" gets an answer from your own symbol instead of a rule of thumb. 🔵 THE RUN BOX After each close break a box is drawn from the level in the direction of the break. Its height is the median run for that class, its width the median bars it took to reach the finish line, and its caption prints the far edge as a price. The box then records what this particular break did: the border thickens when the finish line is reached, the box hollows and its border goes dashed when the break snaps back, and it fades if neither happens. The last few breaks stay on the chart as filled or hollow shapes, so the recent record is visible without reading a single number. The break label itself is frozen at the moment of the break. It shows what the tool said at the time, never a hindsight figure. Only the outcome is added to it afterwards. 🔵 THE SWINGS Swings are confirmed by price, not by counting bars. A swing high is confirmed the first time a bar closes a set number of ATR below it, and a close through the previous swing confirms the swing in between. There is no lookback length to tune and the same setting reads the same on gold, indices, crypto and forex. Tags land on the swing bar when the swing confirms, so they appear a few bars after the extreme printed. That is confirmation lag, not repainting. No tag, break line or break label is ever moved; only the outcome text is added to a label later. The two right-edge blocks and the panel are redrawn every bar by design, so their height follows the current ATR. 🔵 WHAT IS ON THE CHART • HH, HL, LH and LL tags on confirmed swings (the first swing of each side is tagged H or L) • A dashed border on a block means that level has already been wicked without a close through it • A solid structure line at the level that would flip the current structure, teal under price while bullish and pink above it while bearish, with the dealing range shaded between it and the other live level • A block at each live level, projected into the space right of price, captioned with the break type, the price, the distance and the counted result for breaks like it • A line from each broken swing to the bar that closed through it, with a BOS or CHoCH label carrying the count as it stood at that moment • A run box after each break, filled or hollow depending on what the break did • A compact panel restating the structure, the two levels, the class counts and the last break 🔵 WHAT THIS IS NOT This script draws no entries, no stops, no targets and no arrows. It has no order blocks, no fair value gaps, no sessions and no higher timeframe calls. It does not tell you to trade a break. It does not map liquidity pools, equal highs and lows or session extremes, does not count how often price reaches them, and does not mark sweeps or reversals. It is the structure map with the follow-through counted, so you can see on your own symbol whether the breaks you are reading have tended to carry on or to come straight back. 🔵 HOW TO USE • Read the two blocks first. The block above is the level a close must clear and what happened after closes like that; the block below is the level a close must lose. The prices are printed. • Treat the follow-through percentage as a base rate for this class on this chart, not as a forecast for this break. One hundred and sixteen out of 200 is a description of the past. • Use the class split. If close breaks on your chart reach 1 ATR far more often than wick-only breaks, waiting for the close is worth its cost here. If the two numbers are close, it is not. • Watch the run box after a break rather than the label. A box that hollows out is a break that snapped back, and the structure line will tell you where the next flip sits. • Lower the swing setting to 1.0 ATR to see internal structure, raise it to 2.0 or more on choppy symbols so only real pullbacks count as swings. 🔵 SETTINGS • Swing confirmation (x ATR): the close distance from the running extreme that confirms a swing (default 1.5) • Follow-through distance (x ATR): the two finish lines, the same distance either way from the level (default 1.0) • Outcome window (bars): how long the race runs before the outcome is filed as neither (default 30) • Breaks kept per class: the rolling window every count is taken over (default 200), and the minimum n before a percentage prints (default 20) • Chart: break lines to keep, run boxes to keep, minimum block height, how far the blocks project right, the dashboard and its position, colours • Works on any symbol and any timeframe. Charts with little history print n below the minimum until the numbers fill in 🔵 ALERTS • Bullish BOS, bearish BOS, bullish CHoCH, bearish CHoCH, each on the closing bar • Wick-only break: price traded through a structure level and closed back inside • Break reached its follow-through distance • Break snapped back • Price within a quarter of an ATR of a live structure level The engine is close-based, so set alerts to fire once per bar close. ⚠️ DISCLAIMER BOS and CHoCH are community terms for market structure. This is independent work and is not affiliated with or endorsed by any educator or course. The percentages are counted descriptions of what happened after past breaks on this chart, not predictions. A class that reached its follow-through distance 70 times in 100 can snap back today. Samples vary by symbol and timeframe, and small samples are unreliable by nature, which is why every figure carries its n and prints nothing below the minimum. Nothing here is a trade signal. Results depend on market conditions, settings, and your own execution and risk management. Shared for educational and research purposes. Not financial advice.

Chỉ báo

của ForexCracked

NQ OVN AM Amplitude NQ Overnight → AM Amplitude Measures the Nasdaq futures overnight range (18:00–06:00 New York) and compares it with the morning range (09:30–12:00). It also prints a 2× ATR stop distance so you can size risk without leaving the chart. What it shows OVN Range — high minus low of the full 18:00–06:00 NY session, in points and percent AM projected — expected 09:30–12:00 range Overnight above the 60-session median → 0.95× OVN Overnight below the 60-session median → 1.93× OVN Those two multipliers come from an NQ hourly study (577 sessions, Apr 2024–Sep 2026) AM current — live 09:30–12:00 range, same format 2× ATR stop — ATR(14) × 2, in points and percent (timeframe selectable) OVN and AM projected lock at 06:00 and stay until the next session. AM current updates through noon. Percent values use 3 decimals (0.000%). How to use Apply on NQ1! / MNQ1! (needs overnight data). Works on 1-minute; overnight classification uses 15-minute history in the background. After 06:00, read OVN and the projected AM size. During the cash morning, watch AM current versus AM projected. Place stops using the 2× ATR line. On a 1-minute chart, set ATR timeframe to 5 or 15 if the stop looks too tight. Inputs Timezone (default America/New_York) History timeframe and lookback for the overnight median Small / large overnight multipliers (1.93 / 0.95) ATR period, ATR timeframe, stop multiple Notes This is a range map, not an entry signal. The 0.95 / 1.93 factors are historical medians of AM÷OVN, not a guarantee. Futures only. Not financial advice.

Chỉ báo

của integrale42

Volatility Bands IV-RV The question this answers Every expected-move indicator draws the range options are pricing. Almost none of them tell you whether that range is any good. This one measures the implied range and the realized range side by side, then counts how often price actually finished outside each of them. Three layers The cones. Two ranges are drawn across history, both anchored one horizon back and re-anchored every week. The amber cone is built from implied volatility, read from India VIX. The cyan cone is built from realized volatility, measured on weekly bars of the chart symbol. Both are scaled to the same horizon with the same geometry, so a difference in width is a difference in volatility and nothing else. Shading is nested rather than overlapping. The neutral core is the range both measures agree on. The band outside it is the gap between them, coloured by whichever cone sits on the outside. That gap is the variance risk premium made visible, and when it changes colour, realized has overtaken implied. The breach layer. Every bar that closes outside a cone is shaded. On its own this means very little, and that is the point most published expected-move scripts miss. A one-sigma cone is breached about 31.7 percent of the time by construction. So the readout states the expected rate next to the rate actually observed on your loaded history, for both cones separately. If the implied cone is breached far less often than expected, implied volatility was systematically wider than the index needed. If it is breached more often, it was too narrow. That comparison is evidence. The shading alone is not. The forward cone. From the current bar, projecting one horizon ahead, using the latest confirmed weekly volatility. Same nested construction. It is a distribution, not a direction. How it is calculated Implied leg. India VIX is an annualised implied volatility in percentage points, rescaled to the horizon by the square root of the horizon over 52. Realized leg. Weekly log returns over the lookback, scaled to the horizon by the square root of the number of weeks. Three estimators: Yang-Zhang, the default. Weekend-gap variance, open-to-close variance and the Rogers-Satchell range term, weighted by the standard k factor. It uses the whole weekly bar and is the most efficient and most drift-independent. Std Dev. Sample standard deviation of weekly close-to-close log returns. Blind to everything inside the week. ATR%. Weekly Average True Range as a fraction of price, times a factor you set. Range-aware, but the factor is a convention. Bands are lognormal by default. That is not cosmetic: under a zero-drift random walk the expected breach rate of a lognormal band is exactly 2(1 - Phi(k)), so the observed-versus-expected comparison is exact rather than approximate. Timeframes All volatility maths runs in the weekly context, so the readings are identical on a 15-minute chart and on a weekly chart. Use any timeframe up to Weekly. Above Weekly the indicator disables itself and says why, because a weekly request from a monthly chart returns partial bars. Alerts Six: the implied-to-realized ratio crossing either threshold, and price closing outside either cone in either direction. Limitations, stated plainly India VIX measures implied volatility on NIFTY 50. The implied source is an input so you can pair another index with its own volatility index, not so you can run this on any symbol. Pairing one instrument's implied volatility with another's realized volatility is meaningless. The breach sample counts weeks, not independent trials. Consecutive windows overlap by all but one week, so divide n by the horizon for a rough independent count and do not read small differences as significant. The realized cone is estimated from the same series it is tested against, so its observed breach rate is not an out-of-sample result. The implied cone does not have this problem, which is part of why the two are reported apart. Counting starts at the left edge of your loaded history, which varies by subscription and timeframe. Two users can see different n on the same symbol. Square-root-of-time scaling assumes weekly returns are independent. Real index returns cluster in volatility, so it understates the tails in a stress regime and overstates them coming out of one. The implied leg uses a single at-the-money volatility number and ignores skew, so it understates downside and overstates upside against the real option surface. One sigma is a description of a distribution, not a boundary. Cones being broken is expected behaviour. This plots volatility. It produces no directional signal, no entries and no exits. Not financial advice. For education and research only.

Chỉ báo

của MelangeResearch

STOC - EMA Trend Matrix + MTF Regime STOC - EMA Trend Matrix + MTF Regime — Initial Release STOC - EMA Trend Matrix + MTF Regime brings current-chart EMA relationships and multi-timeframe trend alignment into one dashboard. Use it to identify bullish, bearish and mixed conditions across different trading horizons. EMA Trend Matrix Tracks seven EMA pairs on the current chart timeframe: • 5 / 8 • 8 / 13 • 10 / 20 • 9 / 21 • 13 / 21 • 21 / 30 • 30 / 50 Each pair displays its EMA values and trend status. The relationship is bullish when the fast EMA is above the slow EMA, bearish when below, and neutral when equal. Multi-Timeframe Regimes Four predefined structures provide a broader view of trend alignment: • Intraday: 5-minute chart — EMA 5 / 8 / 13 • Swing: 1-hour chart — EMA 9 / 14 / 21 • Positional: Daily chart — EMA 10 / 20 / 30 • Long Term: Weekly chart — EMA 30 / 50 / 200 A regime is bullish when the EMAs are ordered from fastest to slowest in descending value. The reverse arrangement is bearish. Other arrangements are neutral. Trend Scores The dashboard displays bullish, bearish and neutral counts, with separate net scores for the EMA Matrix and MTF Regimes. Net Score = 100 × (Bullish Count − Bearish Count) ÷ Total Count Scores range from −100 to +100. Positive readings indicate bullish dominance; negative readings indicate bearish dominance. Zero can represent balanced opposing votes or entirely neutral conditions. Overall Market Bias The overall bias uses the four MTF regimes: • Strong Bullish: Four bullish regimes. • Bullish: Three bullish regimes. • Neutral / Mixed: Neither direction has three aligned regimes. • Bearish: Three bearish regimes. • Strong Bearish: Four bearish regimes. Dashboard Customization • Auto, Light and Dark themes. • Small, Normal and Large text sizes, with Normal as default. • Six dashboard positions. • Optional EMA value display. • Dashboard visibility toggle. Usage Notes The indicator provides trend context and alignment—not standalone entry or exit signals. Scores measure EMA agreement, not trend magnitude or the probability of a profitable trade. Values update live and may change until their respective timeframe candles close. Requests below the chart timeframe sample lower-timeframe data rather than summarize every intrabar. For educational and analytical purposes only. No indicator guarantees future performance.

Chỉ báo

của BoobeshDasarath93

Mbedaiwi - Market Structure and Price Action mbedaiwi - Market Structure & Price Action Overview This Pine Script v6 overlay brings market structure, liquidity events, order blocks, volume estimates, price imbalances, and chart-pattern candidates into one configurable workspace. It helps users examine where price has broken structure, where earlier zones remain active, and how several observations align on the same chart. The indicator is intended for discretionary analysis and chart study. It is not an automated execution system or a backtested TradingView strategy. Purpose and benefits Compare short-term internal structure with broader swing structure. Organize potential reaction areas using order blocks, imbalances, liquidity levels, and range bands. Compare the volume associated with visible order blocks through an overlay or a separate right-side display. Select the modules and labels needed for a particular workflow, reducing chart clutter. Use alerts to monitor defined events without continuously watching the chart. The integration follows a practical sequence: establish structure, locate relevant areas, observe price interaction, and optionally evaluate a rule-based setup. The components provide context for one another; agreement between them does not establish a probability of success. 1. Market structure Internal and swing structure can be configured separately. The script supports SMC leg-transition detection and symmetric pivot detection, with adjustable lengths. BOS: a break classified as continuation of the current structural direction. CHoCH: a break against the previous structural direction. CHoCH+: a CHoCH supported by an intervening higher low for a bullish change, or lower high for a bearish change, under this script's pivot and sequence rules. HH, HL, LH, and LL: higher highs, higher lows, lower highs, and lower lows. Strong/Weak High-Low: structural classifications based on the current directional state, not forecasts of whether a level will hold. Each structure selector offers All, BOS, CHoCH (All), CHoCH, CHoCH+, and None. CHoCH (All) includes both ordinary and supported changes; CHoCH and CHoCH+ select their respective classifications. The separate Show BOS and Show CHoCH switches also affect visibility. Historical and Present display modes, candle coloring, label sizes, and colored or monochrome themes provide additional control. 2. Order blocks and volume display The script includes independent swing-break, volume-pivot, and legacy structure-break order-block engines. Available controls include zone boundaries, mitigation rules, retained-zone counts, overlap suppression, midlines, and breaker display. Volume information can appear on the price-chart overlay, in a right-side chart, or in both locations. Users can choose the volume accumulation interval, including the interval between a broken pivot and its break, an origin window, or an origin-based interval. How to read the volume numbers The displayed volume belongs to the selected calculation interval. The percentage is that block's share of the summed volume of currently displayed non-breaker blocks. Changing visible blocks, filters, or retention settings can therefore change the percentages. They are not win rates or percentages of the instrument's entire trading volume. Internal buy/sell activity is an OHLCV-based estimate. Close-location mode allocates volume according to the close's position within each candle's range; candle-direction mode allocates it according to candle direction. These estimates do not measure actual bid/ask transactions, institutional orders, or order-book liquidity. Volume-dependent outputs rely on the data supplied for the symbol. 3. Liquidity tools Equal Highs and Equal Lows use an adjustable ATR-based tolerance. Liquidity Grabs identify excursions beyond tracked levels followed by a return inside those levels, subject to the detection rules. Grabs are displayed as hollow frames around the relevant candle wick: blue for bullish lower-wick grabs and red for bearish upper-wick grabs by default. Optional text can be enabled. Detection sensitivity and retained history are adjustable. Live previews can change or disappear before the candle closes. Liquidity Grab alerts require a confirmed bar. Separate trendline tools and trendline-break alerts are also available. 4. Price imbalances The imbalance selector displays one of five types: FVG: a three-candle gap between the first and third candles' price ranges. Inverse FVG: a tracked FVG that is breached and reclassified in the opposite direction. Double FVG: an overlapping area between a new FVG and a tracked opposite-direction FVG. Volume Imbalance: a gap between adjacent candle bodies while their wick ranges overlap. Despite the name, this detection is price-based. Opening Gap: a gap between adjacent candle ranges. Controls include source timeframe, volatility threshold, extension, mitigation method, and maximum retained zones. The imbalance timeframe must be the chart timeframe or higher. Higher-timeframe imbalance detection uses completed source candles, so it becomes available after source-bar confirmation. To hide only the FVG/type text while retaining the shaded zones, disable Show Imbalance Type on Zones. Re-enable it at any time from Inputs. 5. Premium, equilibrium, and discount Optional bands divide a selected Swing, Internal, or Impulse range into upper, middle, and lower reference areas. Band width and colors are adjustable. These areas describe relative position within the selected range; they do not measure fundamental fair value or guarantee a reversal. 6. Chart-pattern candidates The pattern module classifies recent pivot geometry and can display pattern boundaries, shaded zones, and a Detected Pattern table. Candidate types include triangles, wedges, broadening wedges, double tops/bottoms, and head-and-shoulders formations. Pattern drawings are separate from the trendline module. Detection depends on pivot length, available history, and tolerance settings. In this release, a displayed pattern can remain after price has moved outside its boundaries until the detection state updates. Treat the pattern name as a geometric candidate, not confirmation that a formation remains valid or that a breakout will succeed. 7. Additional context and optional setup planning Optional Fibonacci retracements, an OTE region, extension levels, and previous daily/weekly/monthly/quarterly highs and lows provide additional reference points. The optional setup layer combines structural events with configurable checks such as liquidity sweeps, order-block or imbalance interaction, displacement, higher-timeframe direction, EMA alignment, volume, and RSI. Score and Strict modes control how these conditions are evaluated. When enabled, the trade layer can display a hypothetical entry, stop, and up to three targets using configurable zone, structure, ATR, or risk-multiple methods. These are rule-based planning levels, not executed orders or verified performance results. The default mbedaiwi profile suppresses the trade layer. How to use Add the indicator to a standard candlestick chart and choose an analysis profile. The default mbedaiwi profile uses internal length 5, swing length 50, and close-based structural breaks. Select Custom or enable Override profile lengths when you want the manual lengths to take effect. Choose the internal and swing events you want to see. Start with structure and a small number of zones before enabling additional modules. Enable order-block metrics if you want volume comparisons. Select the accumulation method and overlay/side-chart layout appropriate for your analysis. Enable Liquidity Grabs and select detection sensitivity. Distinguish a live preview from a completed event. Choose an imbalance type and its mitigation method. Add premium/discount bands or prior-period levels if they help define context. Enable Patterns only when studying pivot-based formations, and check the actual candles against the displayed boundaries. Use Clean chart mode, individual visibility switches, label sizes, and zone-count controls to manage clutter. The Show tables switch controls on-chart tables. If using the optional setup layer, choose a compatible profile, review all filters and risk settings, and evaluate its behavior before relying on the planning levels. Reading entries, stops, targets, and exits Use the indicator as a sequence of observations: structural direction, an area to monitor, confirmation, and a predefined risk/target plan. A BOS, CHoCH, or Liquidity Grab on its own is not an automatic instruction to buy or sell. Step 1 - Read the structural context Start with Swing Structure for the broader context, then use Internal Structure to examine shorter movements. Higher highs and higher lows describe an upward structure; lower highs and lower lows describe a downward structure. A bullish BOS is classified as continuation, while a bullish CHoCH marks a potential change from the preceding bearish structure. CHoCH+ adds the script's supporting pivot-sequence condition; it does not guarantee a reversal. An internal bullish change can occur while swing structure remains bearish. Always identify which structure level produced the label. Pivot confirmations can arrive after the turning point and be drawn back at the earlier pivot bar. Step 2 - Identify an area to monitor A bullish order block, bullish FVG, discount band, previous low, or Equal Lows can provide a reference area for studying a possible bullish reaction. Price entering an area only establishes an interaction; it does not confirm that a rebound has started. Order-block volume percentages are calculated volume shares, not probabilities that the area will hold. Step 3 - Observe confirmation The following is an illustrative manual reading sequence, not the mandatory algorithm behind every setup generated by the script: Price reaches a previously identified reference area. Price moves below a tracked low and closes back above it, producing a confirmed bullish Liquidity Grab if the detection conditions are met. Price subsequently breaks an internal structural level upward, producing a bullish CHoCH or CHoCH+ under the script's rules. The user evaluates the completed confirmation candle or a later retest of the broken level, together with the broader structure and the planned invalidation level. A retest may never occur, and confirmation can still fail. Do not assume that a marker anchored to an earlier candle was available in real time on that candle. Step 4 - Understand the optional planning layer The planning layer displays hypothetical levels when its setup conditions are satisfied: Entry method: Market, Fibonacci, or Zone determines the entry-reference calculation. Stop method: Structure, ATR, or Zone determines the stop-reference calculation. The selected invalidation level defines where the planned idea no longer applies. Target method: Risk multiple, Smart money, or Hybrid determines how target references are calculated. TP1, TP2, and TP3: up to three target references, according to the selected method. Move stop to breakeven after TP1: updates the hypothetical stop to the entry reference after the first-target condition is met. These are chart calculations. They do not send orders to a broker, establish actual fills, or move a real stop order. To make this layer available, choose a profile such as Custom, enable Show trade layer (entry / SL / TP), and disable Structure only. The default mbedaiwi profile suppresses the trade layer. Enabling the display does not guarantee that levels appear immediately: the selected signal conditions and filters must also be satisfied. Step 5 - Read risk multiples: a numerical example Consider a hypothetical entry at 100 and a stop at 98. The distance between them is 2 per share, so 1R equals 2. In Risk multiple target mode: Entry reference: 100. Stop reference: 98. 1R target: 102. 2R target: 104. 3R target: 106. This example explains arithmetic only. It is not a trade recommendation, a prediction, or a result produced by a backtest. It excludes fees and slippage. A real fill can differ from the plotted reference, and an actual exit can differ from the stop price. If the hypothetical breakeven option is enabled, a qualifying TP1 event changes the plotted stop reference to 100; this does not guarantee a cost-free exit in actual trading. Step 6 - Interpret exits and changes in structure A TP reached alert means that the script's target condition has been met. A Stop-loss reached alert means that its stop condition has been met. Neither confirms that a broker executed an order. A bearish CHoCH during an upward move provides information about a structural change. It does not automatically mean that the planning layer closed a position, nor that every internal change requires the same response. Target exits, invalidation exits, and any discretionary response to opposing structure should be defined before acting on a setup. The script does not automatically carry out partial sales or discretionary exits described by a user's plan. Manual analysis versus calculated setups The manual sequence above explains how the visual components can be read together. The optional planning layer instead evaluates its configured rules, filters, and calculation methods. It does not necessarily require that exact sequence. Neither workflow supplies verified profitability or guarantees that a displayed setup will succeed. Alerts Available conditions cover internal and swing BOS/CHoCH/CHoCH+, liquidity grabs and sweeps, equal highs/lows, imbalance formation, zone interactions, order-block breaks, trendline breaks, detected patterns, and optional setup/target/stop events. Select this indicator in TradingView's Create Alert dialog, then choose the event. Use Once Per Bar Close when you want close-confirmed notifications. General CHoCH alerts also include supported changes; separate CHoCH+ conditions are available. Some touch conditions can remain true across consecutive bars, so they should not be interpreted as one notification per zone for its entire lifetime. Timing, historical drawings, and limitations Pivot-based features require later bars to confirm earlier turning points. Labels and zones may be anchored back to those earlier bars, although the information was not available at that time. Live candles and enabled previews can change before close. This indicator is not presented as universally non-repainting. Zone removal depends on mitigation, age, overlap, and retention settings. Older drawings can disappear as new observations replace them. Results depend on the symbol, timeframe, session, available history, and settings. Different indicators can use different definitions and produce different results. The confluence score is a rule-based score, not a calibrated probability. Volume percentages and Strong/Weak labels are not measures of signal accuracy. The planning layer does not provide a broker execution model, Strategy Tester results, or verified profitability. No accuracy, return, or future-performance claim is made. Source acknowledgment The hierarchical pivot-detection logic used in the Liquidity Grabs module is adapted from LuxAlgo's open-source "Pure Price Action Liquidity Sweeps", licensed under CC BY-NC-SA 4.0. Modifications include wick-frame rendering, display controls, and alert handling. Credit for the adapted source logic belongs to LuxAlgo. This acknowledgment concerns the identified open-source component and does not imply access to LuxAlgo's closed-source Price Action Concepts indicator. This publication is not affiliated with or endorsed by LuxAlgo. Intended use For educational chart analysis and discretionary decision support. Users remain responsible for validating the settings, interpreting signals, and managing risk. No displayed zone, pattern, or setup guarantees a particular market outcome.

Chỉ báo

IV vs RV Volatility Cones What it does It draws two cones around the same anchor price. One is built from implied volatility, read from India VIX. The other is built from realized volatility, measured on weekly bars of the chart symbol. Both are scaled to the same horizon and drawn with the same geometry, so their widths are directly comparable. Where the implied cone is wider than the realized cone, the option market was charging for more movement than the index actually delivered. Where it is narrower, the index outran what options were priced for. That gap is the variance risk premium, and it is the whole point of the indicator. Two cones, two jobs The historical cone is anchored to a weekly close one horizon in the past, so the whole four-week journey sits inside it and you can see how it resolved. Price finishing outside the realized cone means the index moved further than its own recent volatility said it usually does. Price finishing outside the implied cone means it moved further than options had paid for. The forward cone starts at the current bar and projects one horizon ahead, using the latest confirmed weekly volatility reading. It is a distribution, not a forecast of direction. How it is calculated Implied leg. India VIX is an annualised implied volatility quoted in percentage points. It is rescaled to the horizon by the square root of the horizon over 52. Realized leg. Weekly log returns are measured over the lookback, then scaled to the horizon by the square root of the number of weeks. Three estimators: Yang-Zhang, the default. It combines the weekend-gap variance, the open-to-close variance and the Rogers-Satchell range term, weighted by the standard k factor. It uses the whole weekly bar and is the most efficient and most drift-independent of the three. Std Dev. Sample standard deviation of weekly close-to-close log returns. Simple, and blind to everything inside the week. ATR%. Weekly Average True Range as a fraction of price, times a user-set factor. Range-aware, but the factor is a convention rather than a derivation. Both cones use the same geometry, lognormal by default, so a difference in width is a difference in volatility and nothing else. Reading the panel The readout gives the one-sigma figure for each leg in percent, the resulting price cone for each, and the ratio of the two. A verdict line calls the ratio rich, fair or cheap against thresholds you set. Rich means implied is running above realized. That is the normal state for an index, so the useful signal is the size of the gap and its direction of travel, not its sign. Timeframes All volatility maths runs in the weekly context, so the values are identical on a 15-minute chart and a weekly chart. Use any timeframe up to Weekly. Above Weekly the indicator disables itself and says so, because a weekly request from a monthly chart returns partial bars. Alerts Four are provided: implied crossing above the rich threshold, implied crossing below the cheap threshold, and price closing outside the realized cone in either direction. Limitations, stated plainly India VIX measures implied volatility on NIFTY 50. Point the implied source at something else and you are comparing one instrument's implied volatility against another's realized volatility, which means nothing. The input exists so you can pair a different index with its own volatility index, not so you can run this on any symbol. One sigma is a description of a distribution, not a boundary. Roughly one period in three should finish outside a well-calibrated one-sigma cone. Bands being broken is expected behaviour, not a signal. Square-root-of-time scaling assumes weekly returns are independent. Real index returns cluster in volatility, so the scaling understates the tails during a stress regime and overstates them coming out of one. The implied leg uses a single at-the-money-ish volatility number and ignores skew, so it will understate downside and overstate upside relative to what the option surface actually prices. Realized volatility is backward-looking by construction. It tells you what just happened, not what is about to. This plots volatility. It produces no directional signal, no entries and no exits. Not financial advice. For education and research only.

Chỉ báo

của MelangeResearch

TF: Trend Participation Monitor (TPM)TradingFlow: Trend Participation Monitor (TPM) TradingFlow: Trend Participation Monitor (TPM) combines price behavior and relative volume in a separate pane to show recent directional pressure and whether that pressure is improving or deteriorating relative to its recent average. TPM is designed to track relatively short-term changes in price/volume pressure. The time horizon depends on the chart timeframe and lookback settings. TPM separates the level of pressure from the change in pressure. Positive pressure can be weakening, while negative pressure can be recovering. This helps traders distinguish the direction of recent price/volume behavior from changes in its strength. TPM is a pressure monitor, not a predictive reversal indicator or a standalone entry and exit system. Price and Participation Model The model combines two components with equal weight: directional price efficiency and relative-volume-weighted bar pressure. Price efficiency compares net price movement with the total distance traveled by consecutive closes. Bar pressure combines the close-to-close move, normalized by the previous bar's ATR, with the close's position within the candle range. Close-to-close movement includes gaps; closing near the high after a gap down does not automatically make the bar positive. Relative volume compares each bar's volume with the average of preceding bars. Its contribution is capped to limit the influence of isolated volume spikes. The result is smoothed into a pressure score bounded between -100 and +100. This is a price/volume proxy, not actual buy/sell volume or measured capital flows. Pressure and Reference Lines The blue line shows pressure. Values above zero indicate positive pressure within the model, while values below zero indicate negative pressure. The gray line is a slower average of that pressure, providing a reference for recent change. Recent Change Histogram The histogram equals half the difference between pressure and its reference. It measures pressure relative to its recent average, rather than price direction or the change from just one bar ago. With default settings, a change score must remain at or above +5, or at or below -5, for two consecutive bars to receive a confirmed directional color. Four-Shade Color System Purple represents confirmed improvement; gold represents confirmed deterioration. Gray: the threshold or confirmation requirement has not been met. Darker shades indicate columns growing away from zero; lighter shades indicate columns shrinking toward zero or remaining unchanged, compared with the preceding bar. Gray does not mean price is stable, and a lighter gold column can still represent confirmed deterioration even as its magnitude decreases. Compact Dashboard and Activity Context The compact table shows the displayed bar status, recent condition, and pressure/change values. The optional detailed view adds volume, rolling relative volume, estimated stock traded value, optional free-float turnover, and data status. Estimated traded value uses typical price multiplied by volume. Turnover requires a manually supplied free-float figure in millions of shares. Both are stock-only context measurements and do not contribute additional votes to the pressure score. A fixed float figure may not represent historical share counts accurately. Closed-Bar Display and Alerts By default, the indicator holds the last completed bar's readings while the current candle forms. Disabling this option displays provisional live values and colors that may change before the bar closes. Alerts remain restricted to bar close and identify newly confirmed improvement or deterioration. They confirm observed pressure changes; they do not identify the start of a price trend. Volume Data Handling Missing or invalid volume, a zero-volume evaluated bar, and insufficient usable activity suppress pressure output and alerts. The pressure window needs at least two bars with usable positive volume weights. After missing data, a valid recovery window is required before output resumes. Small positive volume is supported, but thin trading can still produce noisy readings. How to Read the Chart Positive pressure with purple columns means pressure is positive and sufficiently above its reference. Positive pressure with gold columns means it remains positive but has weakened relative to that reference. Negative pressure with purple columns indicates recovery within negative pressure, not a confirmed bullish reversal. A histogram near zero means pressure is close to its reference; it does not establish a sideways price trend. Flexible Configuration Users can adjust the activity baseline, pressure window, smoothing, reference length, ATR length, volume cap, change threshold, confirmation period, histogram colors, and dashboard display. The defaults are intended as a starting point for daily stock charts. All lengths count chart bars. On intraday charts, relative volume uses a rolling-bar comparison, not a same-time-of-day comparison, so session openings, closings, and extended hours can affect readings. Use standard candles and consider the meaning of the symbol's volume feed. Practical Use TPM is best approached as a short-term reference when considering entry and exit timing. Its relatively responsive readings can change frequently within an ongoing move, so using every change to reassess an open position may encourage unnecessary second-guessing. For holding decisions, give greater weight to your trading timeframe, broader price structure, and original trade plan. A change in TPM alone is not a reason to enter or exit. TPM can help assess changes in price/volume pressure during advances, pullbacks, and consolidations. Read it alongside price structure and market context. Smoothing and confirmation introduce delay; faster settings can increase noise. Scores are not probabilities, and TPM does not guarantee future price direction or trading profitability. --- TradingFlow: Trend Participation Monitor (TPM) TradingFlow: Trend Participation Monitor (TPM) 結合價格行為與相對成交量，在獨立窗格中呈現近期的方向性壓力，以及壓力相對於近期平均值正在改善還是惡化。 TPM 著重觀察相對短期的量價壓力變化，實際涵蓋的時間範圍取決於圖表週期與回看設定。 TPM 將「壓力的正負」與「壓力的變化」分開呈現。正向壓力可能正在減弱，負向壓力也可能正在回升，讓交易者能區分近期量價表現的方向與強弱變化。 TPM 是壓力觀察工具，並非預測反轉的指標，也不是獨立的進出場系統。價格與成交參與模型模型以相同權重結合兩個部分：價格方向效率，以及相對成交量加權的單根 K 線壓力。價格方向效率比較價格淨變化與連續收盤價的總移動距離。單根 K 線壓力則結合「以前一根 ATR 標準化的收盤價變化」與「收盤價在當根高低區間中的位置」。收盤價之間的變化包含跳空，因此向下跳空後收在當根高點附近，不一定會得到正向判定。相對成交量比較當根成交量與先前數根 K 線的平均成交量，並限制其權重上限，避免單次爆量過度主導結果。模型經平滑後形成介於 -100 至 +100 的壓力分數。這是根據量價推算的數值，並非實際買賣方成交量或資金流入流出。壓力線與參考線藍線代表壓力。高於零表示模型中的正向壓力，低於零則表示負向壓力。灰線是壓力的較慢平均值，用來比較近期變化。近期變化柱狀圖柱狀圖等於壓力與參考線差值的一半。它衡量壓力相對近期平均值的位置，並非直接表示價格方向，也不只是與上一根 K 線相比的變化。預設情況下，變化分數需要連續兩根達到 +5 或以上，或 -5 或以下，才會顯示已確認的方向顏色。四色深淺設計紫色代表已確認的改善；金色代表已確認的惡化。灰色：尚未符合門檻或連續確認條件。與前一根相比，較深色表示柱體朝遠離零軸的方向增長；較淺色表示柱體朝零軸縮短或持平。灰色不代表價格穩定；淺金色即使正在縮短，仍可能處於已確認的惡化狀態。精簡資訊表與成交背景精簡資訊表顯示目前採用的 K 線狀態、近期狀況，以及壓力與變化分數。詳細模式另顯示成交量、滾動相對成交量、股票估算成交額、可選的流通股換手率與資料狀態。估算成交額以典型價格乘以成交量計算。換手率需手動輸入流通股數，單位為百萬股。這兩項僅提供股票的成交背景，不會額外加入壓力分數，避免重複計入成交量。固定的流通股數也未必能準確反映歷史股數變化。收盤顯示與提醒預設在當根 K 線形成期間，維持上一根已收盤 K 線的讀值。關閉此選項後，會顯示即時數值與顏色，兩者在當根收盤前都可能改變。提醒仍只在收盤時觸發，用來通知新確認的改善或惡化。這些提醒確認的是已發生的壓力變化，不代表價格趨勢剛剛開始。成交量資料處理當成交量缺失或無效、被評估的 K 線成交量為零，或有效成交活動不足時，指標會停止顯示壓力讀值並抑制提醒。壓力窗口內至少需要兩根具有有效正成交量權重的 K 線。資料缺失後，需累積完整的有效恢復窗口才會重新輸出。極小的正成交量仍可計算，但交投清淡時的讀值可能較嘈雜。如何閱讀圖表正向壓力搭配紫色柱，表示壓力為正，且已充分高於參考線。正向壓力搭配金色柱，表示壓力仍為正，但相對參考線已轉弱。負向壓力搭配紫色柱，代表負向壓力正在回升，並非已確認的多頭反轉。柱狀圖接近零，代表壓力接近參考線，不代表價格必然處於橫盤。彈性設定可調整成交量基準期、壓力窗口、平滑期、參考期、ATR 週期、成交量權重上限、變化門檻、確認根數、柱狀圖顏色與資訊表顯示方式。預設參數以股票日線作為起點，所有週期均按圖表的 K 線根數計算。日內相對成交量採用滾動比較，並非與過往相同時段比較，因此開盤、收盤與延長交易時段可能影響讀值。請使用標準 K 線，並留意商品所提供的成交量資料類型。實際使用方式 TPM 的定位較適合作為評估進出場時機的短期輔助參考。由於反應較快，即使同一段走勢仍在延續，讀值也可能頻繁變化；持倉期間若每次變化都重新判斷是否續抱，容易反覆猶豫，打亂原有節奏。是否繼續持有，應更重視自己的交易週期、較大範圍的價格結構與原先的交易計畫，不宜僅因 TPM 的變化就決定進出場。 TPM 可協助觀察上漲、回調與整理期間的量價壓力變化，適合搭配價格結構與市場背景使用。平滑與確認機制會帶來延遲；較快的設定也可能增加雜訊。分數並非機率，TPM 不保證未來價格方向或交易獲利。 --- TradingFlow: Trend Participation Monitor (TPM) TradingFlow: Trend Participation Monitor (TPM) は、値動きと相対出来高を組み合わせ、直近の上昇・下落圧力と、その圧力が最近の平均に対して改善しているか、悪化しているかを別のペインに表示するインジケーターです。 TPM は、価格と出来高から読み取れる比較的短期の圧力変化を捉えることを目的としています。対象となる時間の長さは、チャートの時間足と計算期間の設定によって変わります。圧力の水準と、その変化を分けて見ることで、プラス圏にありながら勢いが弱まっている状態や、マイナス圏から持ち直している状態を把握できます。 TPM は圧力の変化を観察するためのツールです。反転を予測するものではなく、単独で売買のタイミングを判断するためのシステムでもありません。価格と出来高を組み合わせたモデルモデルは「値動きの方向効率」と「相対出来高で加重した各足の圧力」を、同じ比率で組み合わせています。値動きの方向効率は、期間中の始点と終点の価格差を、終値が上下に動いた距離の合計と比較します。各足の圧力は、前の足の ATR で調整した終値の変化と、その足の高値・安値の範囲内での終値の位置から計算します。終値間の変化には窓開けも含まれるため、下に窓を開けた後にその足の高値付近で引けても、必ずしもプラスの評価にはなりません。相対出来高は、各足の出来高をそれ以前の足の平均出来高と比較したものです。単発の出来高急増に左右されすぎないよう、計算に使う重みには上限を設けています。計算結果を平滑化し、-100 から +100 の圧力スコアとして表示します。このスコアは価格と出来高に基づく推定値であり、実際の買い・売り別出来高や資金流出入を測定したものではありません。圧力ラインと基準ライン青いラインは圧力スコアです。ゼロより上はモデル上の上昇圧力、ゼロより下は下落圧力を示します。グレーのラインは圧力をより長い期間で平均したもので、直近の変化を判断する基準になります。直近の変化を示すヒストグラムヒストグラムは、圧力スコアと基準ラインの差を 2 で割った値です。価格そのものの方向や、単純な前の足との差ではなく、圧力が最近の平均に対してどの位置にあるかを示します。初期設定では、変化スコアが 2 本連続で +5 以上、または -5 以下になると、条件成立を示す色が付きます。色と濃淡の見方紫は改善条件の成立、ゴールドは悪化条件の成立を示します。グレーは、しきい値または連続確認の条件を満たしていない状態です。前の足と比べてゼロから離れる方向に棒が伸びると濃い色、ゼロに向かって縮むか横ばいになると薄い色で表示します。グレーは価格が安定していることを意味しません。また、薄いゴールドの棒がゼロに向かって縮んでいても、悪化の判定条件は引き続き満たしている場合があります。コンパクトな情報テーブル通常表示では、表示対象の足の状態、直近の判定、圧力スコアと変化スコアを確認できます。詳細表示では、出来高、相対出来高、株式の推定売買代金、任意設定の浮動株回転率、データの状態も表示します。推定売買代金は、代表価格（高値・安値・終値の平均）に出来高を掛けて計算します。浮動株回転率を表示するには、浮動株数を百万株単位で手入力してください。いずれも株式向けの参考情報であり、圧力スコアには加算しません。なお、固定の浮動株数では、過去の株数の変化を正確に反映できない場合があります。確定足の表示とアラート初期設定では、現在の足が形成されている間も、直前の確定足の値を表示します。この設定をオフにすると、リアルタイムの値と色を表示しますが、どちらも足が確定するまでは変わる可能性があります。アラートは設定にかかわらず足の確定時にのみ発生し、改善または悪化の条件が新たに成立したことを通知します。すでに生じた圧力変化を確認するものであり、価格トレンドの始まりを示すものではありません。出来高データの扱い出来高の欠損・無効値、判定対象の足の出来高がゼロの場合、または計算に使える取引データが不足している場合は、圧力の表示とアラートを停止します。圧力の計算期間内には、有効な正の出来高ウェイトを持つ足が少なくとも 2 本必要です。データ欠損後は、所定の期間にわたって有効なデータがそろうと表示を再開します。ごく少量の出来高でも計算できますが、取引が少ない銘柄では値が不安定になることがあります。チャートの読み方圧力がプラスで紫の棒が出ている場合は、圧力がプラス圏にあり、基準ラインを十分に上回っている状態です。圧力がプラスでもゴールドの棒が出ている場合は、プラス圏を維持しながらも、基準ラインに対して弱まっていることを示します。圧力がマイナスで紫の棒が出ている場合は、マイナス圏からの持ち直しを示します。上昇トレンドへの転換が確定したわけではありません。ヒストグラムがゼロ付近にある場合は、圧力が基準ラインに近い状態であり、価格が横ばいであるとは限りません。カスタマイズ出来高の比較期間、圧力の計算期間、平滑化期間、基準ラインの期間、ATR の期間、出来高ウェイトの上限、変化のしきい値、確認本数、ヒストグラムの色、テーブルの表示を調整できます。初期設定は株式の日足を想定しています。各期間は、チャート上の足の本数で数えます。日中足の相対出来高は直前の一定本数との比較であり、過去の同じ時間帯との比較ではありません。そのため、寄り付き・引け・時間外取引の影響を受けます。通常のローソク足で使用し、対象銘柄の出来高データが何を表しているかも確認してください。活用方法 TPM は、エントリーや決済のタイミングを検討する際の、短期的な補助指標としての利用を想定しています。比較的反応が速く、一つの値動きが続いている途中でも表示が頻繁に変わることがあります。保有中にその変化を追いすぎると、判断がぶれたり、当初の売買計画を必要以上に見直したりする原因になりかねません。保有を続けるかどうかは、ご自身の取引時間軸、より大きな値動きの流れ、当初の売買計画を軸に判断し、TPM の変化だけを理由に売買しないことが大切です。 TPM は、上昇局面、押し目、もみ合いの中で、価格と出来高から読み取れる圧力がどう変化しているかを確認するのに役立ちます。高値・安値の位置関係や相場全体の状況と併せて判断してください。平滑化と確認処理には遅れが伴い、反応を速くする設定ではノイズが増えることがあります。スコアは確率ではなく、将来の値動きや取引の利益を保証するものではありません。

Chỉ báo

của realanthonyc

FIA Trend + Momentum 10/20/50 Für TradingView würde ich die Beschreibung auf Englisch halten und klar erklären, was der Indikator macht, ohne ihn als „Trading-System“ zu verkaufen. ## FIA Trend + Momentum 10/20/50 The **FIA Trend + Momentum 10/20/50** indicator combines short-term EMA trend structure with RSI, MACD and Higher Timeframe confirmation. It is designed to make trend direction and momentum easier to identify at a glance while keeping the chart visually simple. ### EMA Trend Structure The indicator uses three Exponential Moving Averages: EMA 10 for the short-term trend EMA 20 for the medium-term trend EMA 50 for the broader trend The background color changes automatically depending on the EMA structure: **Green** EMA 10 > EMA 20 > EMA 50 Clearly bullish trend structure. **Blue** EMA 10 < EMA 20 while EMA 20 > EMA 50 Short-term weakness within a broader positive trend. **Orange** EMA 10 > EMA 20 while EMA 20 < EMA 50 Short-term strength while the broader trend has not yet turned fully bullish. **Red** EMA 10 < EMA 20 < EMA 50 Clearly bearish trend structure. ### RSI The indicator includes a classic RSI calculation with a default length of 14. RSI above 50 supports bullish momentum. RSI below 50 supports bearish momentum. The indicator also checks whether RSI is currently rising or falling. ### MACD The classic MACD settings are used: Fast Length: 12 Slow Length: 26 Signal Length: 9 The MACD is used to evaluate: Bullish or bearish momentum Signal line crossovers Increasing or decreasing histogram momentum ### Higher Timeframe Confirmation The indicator also checks the EMA 10/20/50 structure on a selectable Higher Timeframe. This can be used as an additional trend filter to avoid taking setups that move against the broader market direction. ### Setup Score A scoring system combines several conditions. The maximum score is 6 points: EMA trend structure: 2 points RSI confirmation: 1 point MACD confirmation: 1 point MACD momentum: 1 point Higher Timeframe trend: 1 point The minimum score required for a setup can be adjusted in the indicator settings. ### BUY and SELL Signals BUY and SELL labels are generated when multiple conditions align. The logic combines: EMA trend structure RSI momentum MACD direction MACD momentum Higher Timeframe confirmation Pullback or MACD crossover conditions The signals are designed as additional confirmation and should not be interpreted as automatic trade instructions. ### Alerts Built-in alerts are available for: EMA 10/20 bullish crossover EMA 10/20 bearish crossover EMA 20/50 bullish crossover EMA 20/50 bearish crossover FIA BUY setup FIA SELL setup ### Important This indicator is designed as a **trend and momentum analysis tool**. It should not be used as a standalone trading system. Always consider price action, market structure, support and resistance levels, volatility and proper risk management before making trading decisions. For educational purposes only. **Not financial advice.**

Chỉ báo

của TradingCarina

Candle Range [MMT]Candle Range maps active candle ranges across an execution timeframe and higher-timeframe context. A range uses the seed candle’s full wick high/low and remains active until a candle closes strictly above the high or below the low. That breakout candle becomes the new range, with bullish or bearish direction assigned from the reset. Treat the range like a mother bar. Any candle that doesn't close out side of the mother bar remains as children bars. Features : • Execution and context range grids • High, low, midpoint, 25%, and 75% levels • Bullish/bearish or single-color styling • Optional fills, labels, historical grids, and forward projection • Sweep markers when price wicks outside the execution range and closes back inside • Optional execution midpoint reclaim/loss markers • Context/execution alignment and confirmation read • Range position, breakout strength, and range age • Historical transition statistics with sample counts • Data Window outputs for all key range levels and readings • Alerts for range resets, sweeps, and midpoint events How To Use It • Define your context range (1hr for example). • Move down to your preferred execution timeframe. • If context range is bullish, only trade long when execution timeframe is also bullish. Vice versa for shorts. • Preferred entry is at 50% of the execution timeframe. • Target can be the high/low of the execution timeframe for quick scalp, or aim to hit context range high/low. • Exit when range is flipped in execution timeframe. • Don't trade against execution timeframe range direction, i.e DO NOT shorts when range is bullish, even when context range is bearish. This ensures you have higher probability of hitting the trade. Use the context range for broader directional structure and the execution range for shorter-term confirmation, pullbacks, sweeps, and range transitions. Statistics are descriptive historical readings based only on confirmed range transitions available on the chart; they are not predictions or trading advice.

Chỉ báo

của isthattyler

CCQ Golden Box Pro CCQ Golden Box Pro detects market swings (pivots) to establish a bullish or bearish bias then automatically draws a retracement zone (61.8-78.6% Fibonacci golden pocket, or an ATR-adjusted band) on the latest move. A BUY/SELL signal fires when price returns into that zone in the direction of the bias — but only when higher-timeframe trend, volume, a confirmation candle, and FVG/iFVG confluence all line up, producing a confidence score (HIGH/MEDIUM/LOW) Structure auto-invalidates if price breaks the swing against the bias, and the script keeps its own live statistics (win rate based on ATR target/stop) so you can see whether it's actually performing instead of just trusting the visual signal. best timeframe H5

Chỉ báo

ORB+VWAP NY Bounce ORB + VWAP Bounce — opening-range break with a resting VWAP retest An intraday entry model for the 1-minute chart on index futures. It combines an opening-range breakout filter with a mean-reversion entry, and it only ever takes one trade per session. THE IDEA IN ONE SENTENCE The opening range breaks; a resting LIMIT order then waits at the session VWAP and fills the moment price retests it in the direction of that break. HOW IT WORKS Each session runs through three phases. 1. RANGE — the script records the high and low of the opening-range window (09:30–10:00 New York by default). Nothing is armed until this window closes. 2. BREAK — when price closes beyond that high or low, the side of the break sets the direction for the rest of the day. Broke up = long only. Broke down = short only. This is the only thing that decides direction. 3. RETEST — from the start of the entry window, a limit order rests on the session VWAP, anchored at the RTH open. A long fills on the pullback down to it; a short fills on the rally up to it. WHY THE ENTRY IS A RESTING LIMIT, NOT A MARKET ORDER This is the part worth understanding before using it. A buy limit can only rest BELOW the market, and a sell limit only ABOVE it. So "price is on the correct side of VWAP" is not something the script has to check — it is inherent to the order type itself. A long only exists if price is above the VWAP and pulls back into it; a short only exists if price is below and rallies into it. That is why there is no separate trend filter or bias input in this script: there would be nothing left for it to decide. The break sets direction, the order type enforces location. The trade-off is real and you should know it: a resting limit fills at a known price but is not guaranteed to fill at all. Days where price breaks and never returns to the VWAP simply produce no trade. The script is designed to sit out far more often than it trades. SETTINGS Session / Time — timezone, the RTH session that defines the trading day, the opening-range window, the entry window, and a forced flat time. No position is ever carried overnight. Entry Logic — direction (long only / short only / both), which VWAP anchor the limit rests on (RTH open or Globex open), an optional tick offset so the limit sits a hair on the approach side, and the maximum number of trades per day. Filters / Seasonality — day-of-week switches, month exclusions, and separate gates for the short side only (a time cut-off, weak months, and a weekday block). All of these are OFF or neutral by default. They exist so you can test whether your own instrument and session show asymmetries, not because any particular setting is recommended. Setup Quality — an optional gate on the size of the opening range, measured either in points or as a multiple of the previous day's ATR. The ATR mode is self-scaling, so one setting holds across changing volatility regimes. OFF by default. Stop / Target — the stop can be a fixed tick distance, a multiple of the daily ATR, the VWAP line itself, the opposite side of the opening range, or a retest swing. Targets can be an R multiple, a multiple of the range, a fixed tick distance, or none at all. Trailing Stop — optional, by R multiple or by points, with a configurable activation threshold. There is a switch to remove the fixed target once the trail is active, so a runner is not capped. Risk Management — position size derived from a fixed dollar risk and the actual stop distance, or a fixed contract count. Note that the derived size is a step function: contracts = floor(risk / (stop distance x point value)). Small changes in risk can leave the contract count unchanged, and then jump it by a whole contract. WHAT ELSE IS ON THE CHART A Market Positioning table compares price against five VWAPs (session, overnight, previous session, high-of-day, low-of-day) plus the opening range, for the chart symbol and two correlated tickers you choose. It also reports the opening-range size in points and in ATR multiples, and the daily ATR itself. There is an optional risk:reward box drawn on each entry, and an optional prop-firm tracker that reports balance, distance to a trailing drawdown line, worst margin reached, and a consistency measure. Every order carries a JSON alert_message suitable for automation platforms that parse webhook payloads. BACKTESTING NOTES — PLEASE READ Two Properties settings change results substantially on this script, and both default to values that flatter it: - Limit order execution. Every entry here is a limit order resting on the VWAP. The "Requested price" setting assumes a fill the moment price grazes the line without trading through it, which is optimistic for a resting order. Use "Standard". - Bar detalization. Set it to High. On a 1-minute chart with intrabar stop and target logic, the default resolution is too coarse. Also apply realistic commission and slippage for your instrument before drawing any conclusion. LIMITATIONS This script takes at most one trade per session and requires both a range break and a retest, so it trades infrequently. On any given instrument the sample it produces over a few years may be small enough that ordinary variance dominates. Treat any backtest of it as a description of one particular past, not as an expectation. Seasonal and day-of-week filters are especially easy to overfit: with a handful of trades per month, apparent patterns appear by chance. They ship neutral for that reason. If you turn them on, check that the effect holds in every year of your sample independently, not just in the total. Defaults are a starting point for the instrument and session they were written around. They are not tuned for yours. Nothing here is financial advice.

Chiến lược

của RicoTrades_21