Bắt đầu

Chỉ báo và chiến lược

Macro Risk Regime CompositeMacro Risk Regime Composite The Macro Risk Regime Composite is a multi-factor indicator designed to identify broad risk-on, neutral, and risk-off market environments. The indicator combines liquidity, currency, interest-rate, credit, crypto-liquidity, and equity-market confirmation data into a single normalized score ranging from 0 to 100. A higher score indicates a more supportive environment for risk assets, while a lower score indicates tighter financial conditions and a more defensive market regime. COMPONENTS 1. Net USD Liquidity Net USD liquidity is calculated as: Federal Reserve Total Assets − Overnight Reverse Repo − U.S. Treasury General Account Data source: ECONOMICS:USCBBS − FRED:RRPONTTLD − FRED:WTREGEN Rising net liquidity is treated as supportive for risk assets. 2. U.S. Dollar Index Data source: TVC:DXY A falling U.S. dollar is treated as supportive, while a rising dollar is treated as restrictive. 3. 10-Year Real Yield Data source: FRED:DFII10 Falling real yields are treated as supportive for risk assets. Rising real yields increase the discount rate applied to financial assets and are treated as restrictive. 4. High-Yield Credit Spread Data source: FRED:BAMLH0A0HYM2 Narrowing high-yield credit spreads indicate improving risk appetite and easier financial conditions. Widening spreads indicate increasing credit stress. 5. Stablecoin Dominance Data source: CRYPTOCAP:USDT.D + CRYPTOCAP:USDC.D Falling stablecoin dominance is treated as crypto risk-on, as capital is moving from stablecoins into more volatile crypto assets. Rising stablecoin dominance is treated as defensive. 6. Equity Market Confirmation Data source: NASDAQ:NDX / SP:SPX Rising Nasdaq 100 relative strength versus the S&P 500 is treated as confirmation of stronger risk appetite. CALCULATION Each component measures its momentum over a configurable number of weeks. The component impulse is normalized relative to its own historical distribution using a configurable normalization window. The normalized result is converted into a score between 0 and 100. The final composite is calculated as a weighted average of all active components. Default weights: • Net USD Liquidity: 25% • U.S. Dollar Index: 15% • 10-Year Real Yield: 20% • High-Yield Credit Spread: 20% • Stablecoin Dominance: 10% • NDX/SPX Confirmation: 10% REGIME INTERPRETATION • 65–100: Risk-On • 35–65: Neutral • 0–35: Risk-Off Scores above 50 indicate that the overall macro environment is becoming more supportive. Scores below 50 indicate that financial conditions are becoming more restrictive. The dashboard also classifies each component as: • Supportive • Neutral • Restrictive SETTINGS Momentum Period Defines the number of weeks used to calculate the change in each component. Normalization Period Defines the historical window used to normalize each component relative to its own behavior. Smoothing Applies additional smoothing to reduce short-term noise. Component Weights Allows users to change the importance of each macro factor or disable individual components. Risk-On and Risk-Off Thresholds Allow users to customize the regime classification levels. USAGE The indicator is designed primarily for weekly macro and market-cycle analysis. It may be used as a regime filter for: • Bitcoin and Ethereum • Nasdaq 100 and S&P 500 • Growth stocks • Gold and commodities • Treasury bonds • Other risk-sensitive assets The composite should not be interpreted as a direct entry or exit signal. It is intended to provide context regarding the broader liquidity and financial-conditions environment. The current weekly reading may change before the weekly candle closes because some data series continue to update during the week. DISCLAIMER This indicator is provided for informational and educational purposes only. It does not constitute financial, investment, trading, or legal advice. No macroeconomic indicator can reliably predict future market performance. Historical relationships may weaken, disappear, or reverse during different market regimes. Users should combine this indicator with independent analysis, price structure, position sizing, and appropriate risk management.
Chỉ báo
của ICLV-426
Smart Money Concepts PRO [ITA]Smart Money Concepts in one clean script. Auto-detects swing structure (HH/HL/LH/LL), marks Break of Structure and Change of Character, plots Order Blocks and Fair Value Gaps with full mitigation tracking. Built for traders who want SMC visualization without multiple separate indicators cluttering the chart. Features: - Market structure labels (HH, HL, LH, LL) - BOS and CHoCH detection with directional logic - Auto-drawn Order Blocks with mitigation removal - Fair Value Gaps with fill detection - Configurable max active elements to keep the chart clean - Built-in alerts for structure breaks - Toggle every feature on/off Feedback and suggestions welcome.
Chỉ báo
của itamardrori_
jrhSMCjrhSMCDashboard — Documentation Smart Money Concepts (SMC/ICT-style) dashboard indicator built from scratch. Implements standard, publicly-documented concepts — market structure (BOS/CHoCH), premium/discount zones, equal highs/lows, liquidity sweeps, multi-timeframe VWAP. Input Groups Dashboard Setting Purpose Show Dashboard Master on/off for the table Position Top Right / Top Left / Bottom Right / Bottom Left Text Size Table text size (independent of on-chart label sizes below) Market Structure (BOS / CHoCH) Setting Purpose Swing Pivot Length Bars on each side required to confirm a swing high/low (ta.pivothigh/ta.pivotlow). Larger = fewer, more significant pivots Show BOS / CHoCH Labels Toggle the on-chart structure-break labels Label Text Size Size of CHoCH/BOS labels and pivot dots (Tiny–Huge) Show Pivot Dots Toggle the aqua/fuchsia dots marking confirmed swing highs/lows Liquidity (Equal Highs/Lows + Sweeps) Setting Purpose Show Equal High/Low Labels Toggle EQH/EQL labels Tolerance % How close two consecutive pivots must be (as a % of price) to count as "equal" Label Text Size Size of EQH/EQL and SWEEP labels (Tiny–Huge) Show Liquidity Sweep Markers Toggle the on-chart SWEEP labels Premium / Discount / Equilibrium Setting Purpose Show Premium/Discount Zones Toggle the purple (premium) / blue (discount) zone boxes Range Lookback (bars) Rolling window used to define the swing high/low that anchors the zones, Fib levels, and the dashboard's Levels row Fibonacci Auto-Levels Setting Purpose Show Fib Levels Toggle the 5 auto-plotted retracement lines/labels, computed from the same Range Lookback swing Label Text Size Size of the Fib ratio/price labels (Tiny–Huge) Multi-Timeframe VWAP Setting Purpose Show VWAP Stack in Dashboard Toggle the VWAP (LTF) / VWAP (HTF) rows Momentum (RSI / CVD Proxy) Setting Purpose RSI Length Standard RSI period On-Chart Elements Pivot Dots Aqua dot = confirmed swing high. Fuchsia dot = confirmed swing low. Plotted Swing Pivot Length bars back from the current bar (pivots can only be confirmed in hindsight). EQH / EQL Labels Orange labels marking two consecutive pivot highs (EQH) or lows (EQL) within Tolerance % of each other — these represent liquidity pools resting just beyond the level, a common SMC concept for where stop-runs/sweeps are likely to occur. CHoCH / BOS Labels • CHoCH (Change of Character): the first break of structure against the prevailing trend — a potential reversal signal • BOS (Break of Structure): a break continuing the prevailing trend — confirms trend continuation Direction colors: bullish CHoCH = blue, bullish BOS = teal, bearish CHoCH = purple, bearish BOS = red. SWEEP Labels Marks a liquidity sweep: price wicks beyond a prior swing high/low (taking the resting liquidity) but the candle closes back inside — a classic stop-hunt/reversal pattern. Red "SWEEP" above the bar = buy-side liquidity taken (bearish implication). Green "SWEEP" below the bar = sell-side liquidity taken (bullish implication). Premium / Discount Zone Boxes Purple box = Premium (upper half of the Range Lookback swing — the "expensive"/sell zone in ICT terms). Blue box = Discount (lower half — the "cheap"/buy zone). Gray dashed line = Equilibrium (midpoint). The box slides with the current bar, always covering the most recent Range Lookback bars. Fibonacci Levels Five standard retracement ratios (0.236, 0.382, 0.5, 0.618, 0.786) computed from the same swing range as the Premium/Discount zone, plotted as dotted yellow lines with price labels. Dashboard Table — Row Reference Row Meaning Trend Current market structure bias: Bullish (last break was bullish), Bearish (last break was bearish), or Neutral (no break yet) Session Approximate UTC-based session window (Tokyo/London/New York) and which session comes next. Approximate — verify against your broker's actual session times Levels Premium / Equilibrium / Discount price levels from the Range Lookback swing Indicators RSI (standard) and CVD (approximation — up-candle volume minus down-candle volume; not true tick-level bid/ask delta, since that data isn't available in standard Pine Script) Structure Flip The exact price level that needs to be closed beyond to flip the current Trend reading, phrased as "close above/below X to flip bull/bear" VWAP (LTF) Anchored VWAP for 4H, 1D, and 1W periods VWAP (HTF) Anchored VWAP for 1M, 6M, and 12M periods Sweep Status Most recent liquidity sweep direction, with a (N bars ago) tag for staleness Confluence Own 0–5 composite score counting agreement across Trend, RSI (>50/<50), CVD direction, Premium/Discount position, and Sweep direction. Not a replication of any commercial product's proprietary scoring — a simple vote-count of 5 independent factors
Chỉ báo
của jrogerhowell
NQ Engine Health **NQ Engine Health** NQ Engine Health is a session-aware trade-management and market-confirmation dashboard designed for NQ and MNQ. During the New York session, it measures whether the current NQ move is supported by six major Nasdaq leaders, NQ price structure, VXN behavior and broader ES market context. During London and Asia, the indicator switches to a futures-based engine using the active session open, session VWAP, NQ momentum, volume participation and ES confirmation. The dashboard displays: * Market direction and directional score * Engine Health from 0% to 100% * Strengthening, stable, losing-fuel or diverging conditions * ES and VXN confirmation * Individual Nasdaq leader direction and momentum * Session-adjusted confidence * Suggested trade-management posture Management conditions include **Breathing Room, Normal Structure, Protect Profit and Defensive**. This indicator does not generate trade entries. It is designed to complement a separate entry strategy, important price levels and structured risk management. Alerts are included for Full Throttle, Losing Fuel, Divergence, Protect Profit and Defensive conditions. For educational and analytical purposes only. No indicator can predict or guarantee market outcomes.
Chỉ báo
của EZDinero96
A+ Break & Retest V4 Independent LevelsUn CALL A+ puede aparecer por retest confirmado de: ORB 5-Min High. PMH. PDH. AM High. VWAP. Aunque el precio esté Inside o Below en alguna de las otras filas. Un PUT A+ puede aparecer por: ORB 5-Min Low. PML. PDL. AM Low. VWAP. Aunque los otros rangos no estén simultáneamente en Below. Lo que se mantiene obligatorio CALL arriba de VWAP y EMA 9. PUT debajo de VWAP y EMA 9. EMA 9/21 alineadas. ADX y DI en la dirección correcta. Confirmación con QQQ. SMH para semiconductores. Filtro de chop. Espacio mínimo de 1.5R. Confirmación posterior al retest.
Chỉ báo
của majotrades1234
Market Structure - MTFOverview This indicator maps market structure by detecting confirmed swing points, labelling them as HH, HL, LH or LL, and marking every structural break as either a Break of Structure (BOS) or a Change of Character (CHoCH). It runs on the chart timeframe by default and can optionally read structure from any higher timeframe while you work on a lower one. How swings are detected Swings come from ta.pivothigh / ta.pivotlow at a user-defined Pivot Strength. A pivot requires that many closed bars on each side before it is confirmed, so structure labels never move once drawn — the trade-off is that each swing appears with that many bars of delay. How swings are classified Most structure scripts label a swing high as HH whenever its wick exceeds the previous swing high. This script requires both conditions: the new swing's high must exceed the previous swing's high and its close must exceed the previous swing's close. A single wick poking above a prior high with a weak close is labelled LH instead. The low side mirrors this — LL requires both a lower low and a lower close. This produces fewer HH/LL tags and filters out swings driven entirely by liquidity wicks. How breaks are classified The script maintains a directional bias that flips only on a structural break: BOS — price breaks the last swing high while bias is bullish, or the last swing low while bias is bearish. Continuation. CHoCH — price breaks the last swing low while bias is bullish, or the last swing high while bias is bearish. This is the first break against the prevailing structure and marks a potential regime change. Each swing level can only be broken once, so a level never fires repeated signals. A break draws a line from the origin swing to the break bar, with the label placed above the line for bullish events and below for bearish. Break Confirmation setting Close — a break requires a candle to close beyond the level. Stricter, fewer signals, drawn as a solid line. Wick — any trade through the level counts. Earlier signals, drawn as a dashed line to flag that price never committed beyond it. Structure Timeframe setting Leave blank to follow the chart. Set it explicitly (e.g. 60) to keep higher-timeframe structure on screen while executing on a lower timeframe. Requests use lookahead_off, so higher-timeframe swings only appear after that bar closes. Dashboard Shows the active structure timeframe, current bias, the live swing high and swing low, and the CHoCH level — the price that would invalidate the current bias if broken. Alerts Four conditions: Bullish BOS, Bearish BOS, Bullish CHoCH, Bearish CHoCH. Settings guidance Lower Pivot Strength (3–4) gives more granular intraday structure; higher values (5–7+) give cleaner swings on daily and above. Higher values on higher timeframes generally produce more readable structure. Label Offset controls the vertical gap between text and lines in ATR units. Notes and limitations A CHoCH is an early warning, not confirmation — many traders wait for a subsequent BOS in the new direction before treating a reversal as established. Structure labels and break tests use different criteria by design: labels compare closes for classification, while the break test follows your Break Confirmation setting against the wick extreme, so a swing tagged LH can still produce a bullish BOS if price later closes above its high. In ranging conditions the bias will flip frequently. This tool describes structure; it does not generate entries or exits on its own.
Chỉ báo
của bilalahmaducc
3 EMAs/Triple EMA Trend Matrix [20/60/120] 三重 EMA 趋势矩阵 三重 EMA 趋势矩阵可在价格图表上同时显示三条指数移动平均线，帮助交易者直观观察短期、中期和长期趋势。 指标默认使用 EMA 20、EMA 60 和 EMA 120。用户可以根据自己的交易品种、时间周期和策略，自由调整每条 EMA 的周期、颜色及显示状态。 主要功能： • 同时显示三条 EMA • 三条 EMA 周期均可独立设置 • 支持自定义颜色 • 可单独显示或隐藏任意一条 EMA • 支持自定义价格数据源和偏移量 • 适用于不同市场和时间周期 EMA 的排列与交叉可以辅助判断市场趋势和动量，但本指标不会生成自动买卖信号。建议结合价格行为、市场结构及风险管理方法使用。 本指标仅供学习和技术分析参考，不构成任何投资建议。 Triple EMA Trend Matrix Triple EMA Trend Matrix displays three Exponential Moving Averages on the price chart, helping traders identify short-, medium-, and long-term market trends at a glance. The default settings are EMA 20, EMA 60, and EMA 120. Each EMA length, color, and visibility can be customized independently to suit different markets, timeframes, and trading strategies. Key features: • Displays three EMAs simultaneously • Independently adjustable EMA lengths • Customizable colors • Individual show/hide controls • Custom source and offset settings • Suitable for different markets and timeframes EMA alignment and crossovers may help traders evaluate trend direction and momentum. This indicator does not generate automatic buy or sell signals and is best used together with price action, market structure, and proper risk management. For educational and technical analysis purposes only. This indicator does not constitute financial advice.
Chỉ báo
của trad7595
Unfilled Gap MarkerThis indicator identifies true price gaps and flags the ones that stay unfilled through a user-defined window — by default, four days including the gap candle itself. It is built on an old floor-trading rule, shared anecdotally by veteran trader Linda Raschke, who learned it on the trading floor around 45 years ago: when a gap forms and price does not trade back into the gap area within the next four days, the move tends to continue in the direction of the gap for roughly the next two weeks (about 14 days). Raschke has said this rule holds up around 90% of the time in her experience. That figure is her anecdotal observation — it has not been independently backtested by me, and you should verify it yourself before relying on it. The indicator does one job precisely — it detects each qualifying gap, tracks whether price re-enters the empty band before the window closes, and marks the gap with a triangle only if it survives unfilled. By default the signal prints on the third day of a four-day window, one day before the window closes. This is deliberate: it surfaces the setup while a day still remains, so you can watch that final day rather than being notified only after the window has already passed. What it does It detects true gaps — where a candle's range does not overlap the previous candle's range at all — not just an open above or below the prior close. A gap up requires the current low to be above the previous high; a gap down requires the current high to be below the previous low. This is the stricter, more meaningful definition of a gap: an actual empty band on the chart. Once a gap forms, the indicator watches whether price trades back into that empty band. The near edge of the gap (the prior high for an up gap, the prior low for a down gap) is the level that must hold. If price does not fill the gap within the window, the indicator marks it: Green triangle below the bar — unfilled gap up Red triangle above the bar — unfilled gap down An optional label and a shaded zone over the gap band can be turned on for clarity. Settings Min gap size (%) — ignore gaps smaller than this. Set to 0 to catch every true gap. Window (days) — how many days the gap must stay unfilled, counting the gap candle as day one. Trigger on day N — which day the signal prints. Default is day 3, so the signal appears with one day still left in the window, letting you monitor the final day before acting. Toggles for the label and the shaded gap zone. How to use it Treat the triangle as a heads-up, not a trade command. Because the default trigger is day 3 of a 4-day window, the signal is provisional — the final day can still fill the gap after the triangle appears. Use it to bring a chart to your attention, then apply your own confirmation, risk management, and position sizing. You can add an alert on the signal conditions to be notified when a qualifying gap holds. Important notes and limitations This is a study tool, not a strategy, and it does not place trades or guarantee any outcome. The underlying rule is an anecdotal floor-trading heuristic, not a proven edge. The ~90% success rate is Linda Raschke's stated experience, not a tested or verified statistic — I have not backtested it, and it should be checked across many symbols and timeframes before being relied on, since a pattern that looks convincing on one chart or in one trader's recollection often weakens under systematic testing. Many large unfilled gaps follow earnings or news, so some of what this flags may reflect post-earnings drift rather than the gap itself. The signal evaluates on the trigger day's price and only settles when that candle closes; on a live, still-forming candle it can appear and then change before the close. Nothing here is financial advice. Test thoroughly and trade at your own risk.
Chỉ báo
của Juke10x
Adalis Brent Forward Curve v3.1Adalis Brent Forward Curve v3.1 Release Notes This update focuses on improving the usability and presentation of the Forward Curve while preserving the original analytical methodology. Improvements Redesigned the Forward Curve positioning on the chart. The curve now starts significantly further to the left, preventing it from being hidden behind the data table. Improved overall chart readability and first-time user experience. Contract bullets, labels and connecting lines now move together as a single synchronized object. Enhanced visualization of the complete 12-month Brent Forward Curve. Added configurable horizontal positioning for the entire curve, allowing future adjustments without modifying the source code. Improved chart layout when the right-side information table is enabled. Internal code refactoring for cleaner coordinate management and future feature expansion. No changes No changes to pricing methodology. No changes to spread calculations. No changes to Backwardation / Contango logic. No changes to contract selection. No changes to data sources. Version Adalis Brent Forward Curve v3.1
Chỉ báo
của georgeadalis
Market Structure Break Pro [Part 1]Market Structure Break Pro | Now Available Market Structure Break Pro is designed for traders who want to identify real breakout opportunities with a clean and objective approach. This indicator combines market structure analysis with trend confirmation to help filter low-quality setups and focus on high-probability breakouts. Key Features: • Automatic Market Structure Detection • Break of Structure (BOS) Signals • EMA Trend Filter • Buy & Sell Signals • Breakout Candle Highlight • Dynamic Entry Levels • ATR-Based Stop Loss • TP1, TP2 & TP3 Target Levels • Retest Detection • Instant Trading Alerts • Clean and Professional Interface How It Works: The indicator identifies the latest swing highs and swing lows. A valid breakout above a swing high generates a BUY signal. A valid breakout below a swing low generates a SELL signal. The breakout candle is highlighted for quick visual confirmation. Entry, Stop Loss, and multiple profit targets are calculated automatically to assist with trade planning. This indicator is suitable for Forex, Gold, Crypto, Indices, and Stocks across multiple timeframes. Always combine technical signals with proper risk management and your own market analysis before making trading decisions.
Chỉ báo
của JohnsonForexTrader
Breaker Block Identifier [algo_aakash]Breaker Block Identifier is a market structure indicator that converts failed order block retests into scored, non-repainting breaker zones. Rather than flagging every order block that gets invalidated, the script requires a complete sequence of confirmed price events — order block formation, an opposing structure break, a retracement into the invalidated zone, and a failed retest of that zone — before a breaker is created, and then ranks the result with a transparent quality score. Problem Statement Order blocks are frequently invalidated by a structure break and later retested, but a retest failing to continue in the original direction is not automatically a tradable breaker block. Many public scripts draw a zone as soon as an order block is broken, without verifying that the subsequent retest actually failed, how deep that retest penetrated, or how convincingly price rejected the zone. This produces a high volume of low-quality zones that require manual filtering by the trader. This indicator addresses that gap by treating breaker formation as a multi-stage state machine rather than a single condition, and by scoring every candidate that completes the sequence so weak retests can be filtered out programmatically instead of visually. Methodology Swing highs and lows are identified with ta.pivothigh/ta.pivotlow using a user-defined bar count on each side, so every structural level referenced by the script is a confirmed pivot, never a forming one. An order block source candle is located as the last opposite-colored candle at or immediately before each confirmed swing pivot, within a fixed lookback. The candle must exceed a minimum size expressed as a multiple of ATR, and can optionally be required to close on above-average volume. Zone boundaries can be set to the candle body (open/close) or the full wick range (high/low). Every order block candidate then moves through three internal states. In the Pending state the script waits for an opposing structure break (a close beyond the relevant swing high or low, optionally required to clear the level by a minimum ATR multiple). Once that break occurs the candidate becomes Flipped, and the script waits for price to retrace back into the now-invalidated zone. On entry into the zone the candidate becomes Retesting, and the script tracks the deepest penetration price reaches inside the zone on a bar-by-bar basis. A Retesting candidate resolves in one of two ways. If price closes back through the zone in its original direction by the confirmation displacement threshold, the retest is judged to have held and the candidate is discarded with no breaker created. If price instead closes through the opposite edge of the zone by the same displacement threshold, and the tracked penetration depth met a minimum percentage of the zone's height (the Retest Qualification Filter), the retest is judged to have failed and the order block is converted into a breaker in the opposite direction of its original bias. Each confirmed breaker is then scored from 0 to 100 using six independent, user-weighted factors: the displacement strength of the invalidating structure break, the ATR-relative size of the original order block candle, how closely the retest penetration matched a user-defined ideal depth (scored on a curve, so both shallow touches and near-total breaches score lower than a clean mid-zone tag), the wick-rejection ratio of the confirming candle, how quickly the retest resolved relative to the retest window, and the ATR-normalized distance price traveled before returning to retest. The six sub-scores are combined using auto-normalized weights, so a breaker only appears on the chart, gets drawn, and triggers alerts if it clears the configured minimum quality threshold. Confirmed breakers remain in an Active/Touched state until price closes through the far edge of the zone by the invalidation displacement threshold, at which point the zone is marked invalidated, visually dimmed, and removed after a configurable linger period. A hard maximum-age limit and a per-direction cap on active zone count prevent unbounded object growth. Signal Workflow Step 1 — a confirmed swing pivot forms and an order block candidate is registered from the qualifying source candle behind it. Step 2 — the candidate waits in a Pending state until an opposing structure break (BOS/CHoCH) closes beyond the originating swing level. Step 3 — once flipped, the candidate waits for price to re-enter the invalidated zone, entering the Retesting state and tracking maximum penetration depth. Step 4 — the retest resolves: a displacement close back through the zone in the original direction discards the candidate, while a displacement close through the opposite edge with sufficient penetration confirms a breaker. Step 5 — the confirmed breaker is scored across six weighted factors and only drawn, labeled, and alerted on if it meets the minimum quality threshold. Step 6 — the active breaker zone extends forward until price closes through its far edge by the invalidation displacement threshold, at which point it dims and is scheduled for removal. Why This Indicator Is Different Most public order block or breaker scripts draw a zone the moment an order block is invalidated by a structure break, without separately validating whether the ensuing retest actually failed. This script models breaker formation as an explicit four-state pipeline (source candle, pending, flipped, retesting) and only creates a zone after the retest resolves against its original direction with a minimum measured penetration depth. The Breaker Quality Score converts six independently disclosed factors, including retest penetration depth scored on a curve around a configurable ideal value rather than a simple threshold, into a single adjustable ranking rather than a cosmetic label. Quality-score weighting is fully exposed, allowing the ranking to be tuned toward structure strength, retest precision, wick rejection, confirmation speed, or impulse distance depending on the trader's approach. Zone fill transparency scales with the quality score, so higher-ranked breakers render more opaque and lower-ranked ones fade into the background without adding separate visual elements. An optional formation preview renders the retest phase of a candidate before it resolves, giving visibility into why a breaker did or did not form without permanently cluttering the chart. Inputs Structure Settings Swing Pivot Length Displacement Filter on Structure Break Structure Break Displacement (x ATR) ATR Length Order Block Detection Use Candle Body for Zone Boundaries Min Order Block Size (x ATR) Candidate Expiry (bars) Volume Confirmation Filter Volume MA Length Volume Multiplier Threshold Breaker Conversion Rules Retest Window (bars) Confirmation Displacement (x ATR) Min Retest Penetration (%) Quality Score Filter Breakers by Quality Score Minimum Quality Score Ideal Retest Penetration Ratio Advanced weight sliders for structure break strength, impulse size, retest precision, wick rejection, confirmation speed, and distance traveled Visual Settings Bullish/Bearish Breaker Colors Min/Max Fill Transparency Show Zone Midline Show Quality Label Label Size Formation Preview toggle and color Lifecycle & Cleanup Max Active Breakers (per side) Invalidation Displacement (x ATR) Invalidated Linger (bars) Max Breaker Age (bars) Info Panel Show Info Panel Panel Position Alerts Alerts are available for: Bullish Breaker Block formed Bearish Breaker Block formed Structure confirmation on breaker conversion Price entering an active breaker zone Breaker invalidated Practical Usage Use the info panel's structure bias reading as directional context before evaluating individual breaker zones. Treat a fresh, high-quality breaker aligned with the prevailing structure bias as a potential continuation zone rather than a standalone entry signal. Raise the minimum quality threshold on lower timeframes or noisy instruments to reduce the number of marginal zones drawn. Use the retest penetration and displacement settings together to control how strict the failed-retest qualification is for your instrument and timeframe. Combine the alert feed with a broader trade plan, since each alert marks a structural event, not an execution signal. Limitations Swing pivots require bars to form on both sides before they confirm, so structure breaks and order block placement are inherently delayed by the swing pivot length. The order block source candle is located within a fixed lookback behind each pivot; if no qualifying candle exists in that window, no candidate is created for that pivot. Quality scoring is a relative ranking based on disclosed, adjustable factors and does not predict the outcome of any individual breaker zone. Volume-based filtering depends on the data provider's reported volume and may behave inconsistently on instruments with limited or unreliable volume data. As with any structure-based tool, results will vary across instruments, timeframes, and market regimes. Notes This indicator is a market structure analysis tool intended to organize and rank breaker block formation through a disclosed, multi-stage validation process. All structure breaks, state transitions, breaker confirmations, and invalidations are evaluated on confirmed bar closes only, so no element of the script repaints once drawn. The output is intended to support structural analysis and is not a standalone buy or sell recommendation.
Chỉ báo
của algotim
FVG+sell+buy Trend & Value: EMA 9 must be above EMA 20 for longs (and below for shorts), while price interacts with the VWAP as an intraday anchor. Fair Value Gap (FVG): A 3-candle pattern where a market imbalance leaves an unfilled "gap" between Candle 1's wick and Candle 3's wick. Institutional Entry (Order Block/Mitigation): Institutions buy or sell with massive volume. This script defines an institutional entry when price mitigates (taps into) a fresh FVG on above-average volume, signaling that big players are defending that price level. TradingView Pine Script V5 Code Tap inside the code box below and copy it. Open TradingView, clear your current script entirely so it is completely blank, paste this code, and click Save.
Chiến lược
của nishadkrishnan82
DOUBLE SUPERTREND PYRAMID STRATEGYDouble Supertrend Pyramid Strategy This strategy trades off two Supertrend indicators calculated on independent, user-selected timeframes (defaults: 1-minute and 2-minute). A trade is only taken when both Supertrends agree on direction — when they align upward, the strategy goes long; when they align downward, it goes short. Each new alignment is treated as a new "plotted course," and the strategy tracks that course's direction so it doesn't re-enter on every bar, only on an actual flip. Core Entry Logic Long/Short/Both direction control, so you can restrict the strategy to one side of the market if desired. A session time-window filter (with a timezone dropdown covering major global zones) lets you restrict trading to specific hours, with an option to auto-close everything when the window ends. On a Supertrend flip, the strategy normally waits until the position is completely flat before entering the new direction — it does not force-close open tiered or pyramid contracts just because the trend flipped. (See "Exit At Next Supertrend Plotted Course" below for the opt-in alternative.) Tiered Exit System Three independent, fully self-contained profit-scaling tiers (Tier 1/2/3), each with: A profit target (ticks) and contract quantity to scale out at that target An optional Stop Loss, and an optional Trailing Stop with a separate activation threshold (ticks, own enable checkbox) An "Exit At Next Supertrend Plotted Course" checkbox — when checked, that tier's contracts are force-closed the moment the trend flips; when unchecked (default), the tier runs entirely on its own Target/Stop/Trailing settings regardless of what the trend does next. Pyramid Add-On System Eight independent pyramid types can each be enabled separately to add contracts in the direction of an existing position when their own specific condition fires: Turtle ATR Unit — adds every time price moves a set fraction of ATR in your favor from the last fill. Swing Structure — adds on a new confirmed swing high/low in the trend direction. Momentum Re-confirmation — adds when ADX is rising with DI+/DI- agreement and RSI holds past a threshold. Breakout / Consolidation — adds on a fresh Donchian channel breakout. Multi-Timeframe Alignment — adds only when a higher-timeframe EMA filter agrees with the trade direction. Error-Function One-Tailed Test — adds when the current bar's move is statistically significant versus its recent return distribution (Normal or Student-T approximation). KDE Percentile — adds when the current move ranks in the top percentile of a non-parametric kernel-density estimate of recent returns. Viterbi Regime Detection — adds only while a 2-state Hidden Markov Model infers the market is in a "trending" (versus "ranging") regime. Each pyramid type is fully self-contained: its own contracts-per-signal size, its own optional TP/SL/Trailing Stop, its own per-course contract and signal caps, a delay-between-signals timer, a minimum-distance-before-next-add gate (selectable as ATR multiple, percent, ticks, points, or dollars), and its own "Exit At Next Supertrend Plotted Course" checkbox. All types default to fully disabled. Global Risk Controls (always active, override everything) Max contracts per trade (position size cap across core + pyramid adds) Master daily $ take-profit and $ max-loss halts Volatility Exit — flattens everything if ATR expands beyond a multiple of its recent average ATR Protective Stop — a catastrophic-loss stop measured off the position's average entry price Reverse-At-Stop-Loss — an optional system that flips the core position to the opposite side when the per-course Stop Loss is hit, capped at a configurable number of reversals per course
Chiến lược
của BLIMI