Hỗ trợ và kháng cự

Liquidity Sweep & Golden Zone [StrixEDGE]Overview Liquidity Sweep & Golden Zone is a multi-timeframe structural analysis tool built for traders who use Smart Money Concepts (SMC) and ICT methodology. It identifies liquidity sweeps at confirmed swing levels, maps the Fibonacci Golden Zone (OTE), and presents a real-time confluence dashboard across 15-minute, 1-hour, 4-hour, and daily timeframes. The indicator answers three questions at a glance: where is the liquidity?, has it been swept?, and do multiple timeframes agree on direction? How It Works Liquidity Sweep Detection The engine tracks confirmed swing highs and swing lows using pivot detection. These pivots represent resting liquidity pools — areas where stop-loss orders accumulate: - Buy-Side Liquidity (BSL) sits above swing highs, where short sellers place their stops. When price wicks above a swing high and closes back below, a BSL sweep is triggered — signaling that buy-side stops were hunted. This typically precedes bearish continuation. - Sell-Side Liquidity (SSL) sits below swing lows, where long traders place their stops. When price wicks below a swing low and closes back above, an SSL sweep is triggered — signaling that sell-side stops were hunted. This typically precedes bullish reversal. Each sweep event displays the estimated volume in USDT at the moment of the sweep. This is calculated as `volume × close` on the sweep bar and serves as a proxy for the magnitude of liquidations that occurred. Higher volume sweeps tend to produce stronger reversals. After a sweep, the level is updated to the new extreme — preventing duplicate signals and establishing a fresh liquidity reference. Support & Resistance (Pivot-Based) Active (un-swept) pivot levels are drawn on the chart as structural Support and Resistance: - A line extending from the bar where the pivot formed to the current price area - A zone band (ATR × 0.15) around the level, representing the area of influence - Origin labels showing "Buy-Side Liquidity SWEEP" or "Sell-Side Liquidity SWEEP" with the USDT volume - Price labels on the right edge for quick reference These levels update dynamically: when a new pivot is confirmed, the line starts from the new origin. When a sweep occurs, the level shifts to the sweep bar. Golden Zone (Fibonacci OTE: 0.618 – 0.786) The Golden Zone represents the Optimal Trade Entry area — the 61.8% to 78.6% Fibonacci retracement of the most recent price range. Unlike pivot-based calculations, this indicator uses a **lookback-based approach**: it finds the highest high and lowest low over a configurable number of bars, then derives the zone from that range. The zone is visualized with: - A filled box between the 0.618 and 0.786 levels (transparency adjustable) - Dashed border lines at 0.618 and 0.786 - A dotted midline at the 0.702 level - Price labels showing exact values - A centered "GOLDEN ZONE" tag This approach produces a stable, always-visible zone that doesn't depend on individual pivot detection, making it reliable across all market conditions. Multi-Timeframe Heatmap The core of this indicator is a 7-column heatmap table that evaluates market conditions across four timeframes simultaneously: | Column | What It Shows | Bullish | Bearish | |--------|--------------|---------|---------| | SWEEP | Recent liquidity sweep direction | ● BULL (SSL swept) | ● BEAR (BSL swept) | | GZ | Price position relative to Golden Zone | ▲ ABOVE | ▼ BELOW | | S/R | Price position vs. pivot S/R midpoint | ▲ BULLISH | ▼ BEARISH | | BIAS | EMA 21/50 trend direction | ▲ BULL | ▼ BEAR | | RSI | RSI(14) value with decimal precision | Color-coded by zone | Color-coded by zone | | SIGNAL | Composite of all conditions | LONG ▲ | SHORT ▼ | Signal Logic: The SIGNAL column counts four conditions per timeframe — RSI above/below 50, price in/above the Golden Zone, price above/below the S/R midpoint, and EMA bias direction. When 3 or more conditions align bullish, the signal reads LONG. When 3 or more align bearish, it reads SHORT. Otherwise, NEUTRAL. A confluence bar at the bottom aggregates all timeframes. When the majority of conditions across all four timeframes agree, it displays STRONG BULLISH or STRONG BEARISH CONFLUENCE. RSI Color Coding | RSI Range | Color | Meaning | |-----------|-------|---------| | > 70 | Orange | Overbought | | 50 – 70 | Green | Bullish momentum | | 30 – 50 | Red | Bearish momentum | | < 30 | Blue | Oversold | Settings Structure Settings | Setting | Default | Description | |---------|---------|-------------| | Pivot Lookback Length | 5 | Bars left and right to confirm a swing pivot. Higher values produce fewer but stronger levels | | Sweep Active Memory | 10 | How many bars a sweep signal remains active on the heatmap after detection | Golden Zone | Setting | Default | Description | |---------|---------|-------------| | Lookback Period | 20 | Number of bars to find highest high and lowest low for Fibonacci calculation | | Show Golden Zone | On | Toggle zone visibility on chart | | Fill Golden Zone | On | Shade the area between 0.618 and 0.786 | | Fill Transparency | 88 | Opacity of the filled zone (50–98) | | Golden Zone Color | Gold | Color for all Golden Zone elements | Support & Resistance | Setting | Default | Description | |---------|---------|-------------| | Show S/R on Chart | On | Toggle S/R lines, zone bands, and labels | | Support Color | Teal | Color for support level and SSL elements | | Resistance Color | Red | Color for resistance level and BSL elements | | Line Width | 2 | Thickness of S/R lines (1–4) | | Line Style | Solid | Solid, Dashed, or Dotted | | Show Price Labels | On | Display price values at the right edge of each level | Sweep Event Labels | Setting | Default | Description | |---------|---------|-------------| | Show Sweep Labels | On | Toggle sweep event markers on chart | | Bullish Sweep Color | Green | Color for SSL sweep labels (bullish reversal) | | Bearish Sweep Color | Red | Color for BSL sweep labels (bearish reversal) | Heatmap Table | Setting | Default | Description | |---------|---------|-------------| | Show Heatmap Table | On | Toggle the entire dashboard | | Table Position | Top Right | 9 position options across the chart | | Table Cell Size | Normal | Tiny, Small, Normal, Large, or Auto | Alerts Five alert conditions are built in and ready to use: 1. Bullish Liquidity Sweep — SSL swept, potential bullish reversal 2. Bearish Liquidity Sweep — BSL swept, potential bearish reversal 3. Bull Sweep + Golden Zone — SSL swept while price is inside the OTE zone (high-probability long) 4. Bear Sweep + Golden Zone — BSL swept while price is inside the OTE zone (high-probability short) 5. Price in Golden Zone — Price enters the 0.618–0.786 zone on any bar Disclaimer This indicator is a technical analysis tool designed to assist in identifying potential areas of interest based on market structure and liquidity concepts. It does not constitute financial advice. The USDT volume figures are approximations, not verified liquidation data. Always use proper risk management and combine this tool with your own analysis. Past performance of any signal or pattern does not guarantee future results. Trade at your own risk.

Chỉ báo

của StrixEDGE

ES & NQ Daily Levels -- Paste-In Support/Resistance Mapper This Daily Levels script is a manual, paste-in mapping tool. Paste a list of price levels into the settings and it draws them on your chart as clean lines and shaded zones with labels. It does not calculate signals or repaint — it simply renders the levels you enter. Works on any symbol — ES, NQ, SPY, SPX, stocks, futures, forex, and crypto. Just paste levels that match that instrument's price. Leave the box blank and it shows a few sample reference levels around current price (clearly tagged "sample", 10 points apart by default) so you can see how it works on any chart. The samples auto-hide the moment you paste your own levels. (The 10-point default spacing suits ES/NQ; for other instruments set the spacing to fit, or set it to 0 for auto.) WHAT IT DRAWS • Single prices → horizontal lines with labels • Ranges (e.g. 5200-5205) → shaded zones • Section groups you can label: Resistances, Supports, and special groups (Backtest, Add, Breakdown, Short) • Tag any level "(major)" and it renders thicker DYNAMIC S/R FLIP (optional) When enabled, each level you paste under Supports/Resistances is colored by where price is right now: • Price above the level → acts as support (green, "S") • Price below the level → acts as resistance (red, "R") • Price inside a zone → neutral / in-play (yellow) Turn it off to keep the exact section labels you pasted. HOW TO USE 1. Add the indicator to your chart. 2. Open its settings → "PASTE YOUR DAILY LEVELS HERE". 3. Paste your levels, one section per line, for example: Resistances: 5210, 5218 (major), 5225-5228 Supports: 5188, 5175 (major) 4. Lines, zones, and labels draw automatically. Colors, widths, spacing, and label styling are all configurable. NOTE The sample levels are auto-generated placeholders for demonstration only — they are not recommended levels and should not be used for trading. This tool does not generate, suggest, or predict levels; it only displays the ones you enter. For educational purposes only. This is not financial advice.

Chỉ báo

của janicetrades

XG Boost Lite: Reversals | GainzAlgo We are excited to release this indicator, which uses our brand-new Arbor library for gradient boosting! This engine brings true, high-performance machine learning natively into Pine Script v6, bypassing the need for external webhooks or API layers. By utilizing iterative, tree-based models on your chart, XGBoost Lite: Reversals adapts directly to the historical structure of the asset you are trading, identifying precise pivot exhaustion points with high statistical conviction. 🧠 Understanding Gradient Boosting & XGBoost To trade successfully with machine learning, it helps to understand exactly what is happening beneath the hood of the asset's data.The Core TheoryGradient Boosting is a powerful machine learning technique used for regression and classification tasks. Unlike deep learning networks that process data through abstract node layers, gradient boosting relies on an ensemble of simple decision trees, often called "weak learners" or "stumps". The training process works sequentially: The Initial Guess: The model makes a basic baseline prediction.Calculating the Error (Residuals): It checks where its prediction missed the actual historical market outcome. Correcting the Mistakes: A new decision tree is built specifically to predict those errors (the gradient of the loss function). Iterative Learning: The model repeats this process for several rounds. Each new tree focuses entirely on correcting the flaws of the previous ones, scaling its adjustments by a Learning Rate to maintain stability. What Makes XGBoost Special? XGBoost (Extreme Gradient Boosting) optimizes this framework for speed, scalability, and performance. It applies strict regularization techniques to minimize overfitting, ensuring the model doesn't just "memorize" past market noise but instead learns genuine structural behaviors.By evaluating multiple market features simultaneously, it estimates the probability of a specific event occurring. 🛠️ About the Indicator XGBoost Lite: Reversals is a machine learning-driven technical indicator designed to catch exhaustion and reversal setups. The Machine Learning Pipeline Dual Engines: The script fits four separate models simultaneously—a classifier and a regressor for Longs, and a classifier and a regressor for Shorts. Dynamic Retraining: Rather than remaining static, the model automatically flushes its memory and retrains its internal mathematical weights every n bars to adapt to evolving market regimes. Strict Non-Repainting Execution: A critical upgrade in this framework forces features and calculations to compute and lock strictly on bar close. Signals, dynamic entry points, and risk metrics are only printed once the triggering candle is finalized, ensuring what you see on the historical chart matches real-time execution perfectly. The Core Features Evaluated The model processes a combination of multi-dimensional market inputs to generate a unified prediction: RSI (14): Evaluates traditional momentum expansion and contraction. Relative Volume (20): Evaluates institutional engagement by dividing current volume against its 20-period SMA. Z-Score (20): Measures how far the current price has deviated from its statistical mean. ADX (14): Gauges the overall strength of the macro trend to prevent trading directly into a runaway freight train. 📊 How to Use the Indicator The Real-Time Dashboard: When applied to your chart, the indicator renders an advanced Feature Importance Scatter Plot in the right-hand margin. Distribution Scatter: The horizontal bars plot the historical density of successful signals. Darker, tightly packed nodes represent highly concentrated, high-probability clusters discovered by the algorithm. Visualizing Signals When a market pivot is detected (e.g., a structural swing low or high) and the classifier hits your target confirmation probability, a signal arrow prints on the chart displaying the mathematical certainty ($e.g., 74.2\%$) of the reversal. ⚙️ The Settings Inputs The indicator’s interface is neatly categorized into three primary functional groups: ⚙️ XGBoost Model Settings: Training Lookback (Bars): (Default: 250) The historical window used to feed the training arrays. Max capped at 300 to remain computational within Pine Script limits. Retrain Frequency: (Default: 50) Determines how often (in bars) the model recalibrates its trees. Boosting Rounds: (Default: 20) The number of sequential trees (stumps) trained per model. Higher numbers capture deeper complexities but risk overfitting. Learning Rate: (Default: 0.3) The step size applied to each boosting round to prevent the model from learning too quickly. Min Probability for Signal: (Default: 0.65) The minimum confidence threshold ($65\%$) required from the classification model to trigger an active trade. ADX Length / Minimum Filter: (Default: 14 / 20.0) Prevents counter-trend signals if the prevailing macro trend is too strong. 🛡️ Target & Risk Management SL Wick Buffer ×ATR: (Default: 0.25) Sets how much breathing room is given below a swing low wick or above a swing high wick, scaled by ATR. TP1 ×Risk (R-multiple): (Default: 1.0) Targets a clean 1:1 Risk-to-Reward ratio for the initial profit take. TP3 Min ×Risk (Floor): (Default: 2.0) The minimum target floor for the machine learning regression objective. Break-Even After TP1: (Default: True) Automatically moves the Stop Loss to the exact entry price the moment TP1 is captured, eliminating risk on the remainder of the trade. 📈 How to Trade the Indicator Trading with the machine learning model requires blending quantitative probabilities with standard structural execution: The Entry: Wait for a Bullish (Neon Purple) or Bearish (Neon Pink) arrow to finalize on a closed candle. The percentage printed indicates the model's confidence. Placing Risk: The system automatically draws a solid line anchoring your Stop Loss tightly to the local structural wick pivot, applying an ATR buffer to account for minor noise. Scaling Targets: Target 1 (TP1): Landed at a symmetrical 1:1 distance. When hit, the indicator dynamically updates your Stop Loss to your entry line, locking in a "scratch-or-better" runner. Target 2 (TP2): Represents the mathematical midpoint between your baseline risk and the macro ML objective. Target 3 (TP3): Driven directly by the XGBoost Regression Model. The regressor estimates the potential mathematical expansion based on current market features—if volatility is expanding, TP3 will automatically stretch further to ride major trend changes. 📊 Deep Dive: The Feature Importance & Scatter Plot Dashboard The dashboard rendered on the right side of the chart acts as the "brain" of the indicator. It provides real-time transparency into exactly how the machine learning model is weighing data and evaluating current market conditions. Feature Importance Bars (The Relative Weights): The horizontal progress bars display the mathematical percentage weight allocated to each of the four indicators processed during the model's most recent training cycle. These values change dynamically every time the model triggers a retraining block (default: every 50 bars) as it adapts to shifting market conditions. For example, if the market moves into a heavy trending phase, you will notice metrics like the ADX or Z-Score capture a higher percentage of the model's attention, whereas the RSI will frequently become the dominant driver if the asset is range-bound. The Holographic Scatter Plot (Historical Feature Density): Layered over the progress bars is an advanced distribution scatter plot consisting of individual circular glyphs (○, ◉, ●) that plot a rolling record of the last 30 historical signal points. The horizontal position of each dot shows exactly where the feature value landed relative to its historical extremes (0 on the far left, 1 on the far right). The script introduces a subtle vertical "jitter" to separate these dots so you can visually identify high-density clusters where successful reversal setups frequently occur, while the shifting style of the glyphs flags tightly packed clusters of solid nodes (●) to indicate highly concentrated mathematical sweet spots discovered by the XGBoost classifier.

Chỉ báo

của GainzAlgo

GMS Session Rays (Sydney/Asia/London/NY)A lightweight Pine v6 indicator that plots the previous completed session’s High and Low for the four major sessions—Sydney, Asia, London, New York—so you always see the most actionable structure levels without chart clutter. Lines auto-update at the end of each session and extend right as horizontal rays. Labels are clean, stack automatically to avoid overlap, and can be placed on the left or right side of the chart. What it shows Previous session High/Low for each enabled session (not the current live session). Right-extended rays at those prices, updated when the session closes. Optional labels per session (e.g., “sydney high”, “london low”), with auto-stacking to prevent overlaps. Customization Per-session toggles: show/hide each session; show/hide labels per session. Style controls: color, width, and line style (Solid/Dotted/Dashed) per session. Label controls: global on/off, Left/Right placement, bars offset, Y-offset (in ticks), size (Tiny/Small/Normal), auto-stacking with adjustable step. Session windows: editable HHMM-HHMM for Sydney/Asia/London/NY. Timezone: set a single indicator timezone (default America/New_York). Only Today mode: clears older rays daily to keep charts minimal. How it works (under the hood) Tracks High/Low only while a session is active; when it ends, those values are frozen and plotted as the previous session levels.

Chỉ báo

của whoisyungeli

Classic Pattern Engine Is a chart-pattern detection tool built around confirmed swing pivots. The script identifies selected classic chart-pattern structures and draws them directly on the chart. It is designed as a visual pattern-mapping tool, not as an automated trading system. What the script detects Reversal patterns: - Double Top - Double Bottom - Triple Top - Triple Bottom - Head and Shoulders - Inverted Head and Shoulders Continuation / structure patterns: - Rectangles - Ascending Triangle - Descending Triangle - Symmetrical Triangle - Rising Wedge - Falling Wedge - Bull Flag - Bear Flag - Bullish Pennant - Bearish Pennant How it works The script uses confirmed pivot highs and pivot lows to build a swing structure. It then compares the most recent confirmed swings against geometric conditions such as: - Similarity of highs or lows - Pattern height relative to ATR - Slope of upper and lower boundaries - Convergence or parallel behavior - Pattern duration - Flag or pennant context when applicable Each detected pattern receives a quality score. This score is based on the geometry of the pattern, such as symmetry, height, similarity of key swing points, slope behavior, and structure fit. The score is intended to help users filter weaker shapes from cleaner structures. Entry, Stop, and Target levels The script can display Entry, Stop, and Target reference levels for detected patterns. These levels are geometric references derived from the detected pattern structure. They are not trade recommendations. The script can also track the state of the detected setup: - Pending: the pattern is detected but entry has not been triggered - Active: entry level has been reached - Target Hit: price reached the target reference level - Stop Hit: price reached the stop reference level - Expired: the setup remained unresolved beyond the selected time window The Entry label can also show an estimated R:R value based on the distance between Entry, Stop, and Target. Main settings Detection: - Pivot strength - Equality tolerance in ATR - Minimum pattern height - Minimum pattern quality - Maximum pattern length Display: - Show only latest pattern - Show pattern lines - Show entry / stop / target levels - Show R:R in entry label - Fade inactive levels after result - Entry / stop / target projection length - Pattern line width - Entry / stop / target line width - Entry / stop / target label size Colors: - Pattern colors - Entry line color - Stop line color - Target line color - Entry text color - Stop text color - Target text color - Resolved / inactive level styling How to use Use the indicator as a visual assistant for identifying and reviewing chart-pattern structures. A detected pattern means the required swing geometry has formed. It does not mean that the pattern will complete successfully or that price will reach the target. Users can choose to display only the latest pattern for a clean chart, or keep more visual history by changing the display settings. Repainting note This script uses confirmed pivot highs and confirmed pivot lows. A pattern can only be detected after the required pivot confirmation bars have passed. For this reason, pattern drawings may appear on earlier swing points after confirmation. This is a normal confirmation delay caused by pivot-based detection. The script does not use lookahead. Entry, stop, target, and state labels update only as new bars develop after a pattern has been detected. Limitations Chart patterns are geometric interpretations of price structure. Different traders may classify the same structure differently. The displayed Entry, Stop, Target, and R:R values are reference levels calculated from the pattern geometry. They should not be treated as financial advice, trading instructions, or guaranteed outcomes. The indicator is intended for chart analysis, education, and visual pattern review.

Chỉ báo

Multiday VWAP by Bybllo Multiday VWAP by Bybllo OVERVIEW This indicator plots up to 5 independent rolling Volume Weighted Average Price (VWAP) lines, each anchored a different number of calendar days back from the present bar (default: 2, 3, 4, 5, and 6 days back). Unlike a standard session VWAP that resets every day, each line here accumulates price*volume continuously from its own anchor day up to the current bar, giving traders a set of rolling reference levels for recent multi-day price/volume balance. I built this for my own trading because I couldn't find an existing community script that did exactly this — a set of independent, multi-day rolling VWAP lines in one indicator — so I'm sharing it in case it's useful to others too. KEY FEATURES - 5 independently configurable rolling VWAP lines — toggle visibility, set the lookback in calendar days, and pick a color for each line individually. - Lookback days are entered as calendar days (weekends included), so "6 days back" always lands on the same relative session regardless of where in the week you are. - Real-price calculation — prices are pulled via request.security() against the plain ticker, so the VWAP values are identical whether your chart is displaying candlesticks, Heikin Ashi, Renko, or any other non-standard chart type. Volume is unaffected by chart type and is used as-is. - Robust new-day detection — instead of relying on the chart's own bar-by-bar progress to detect a new trading day (which can be unreliable right after the chart first loads), this script requests daily-resolution data directly. Daily data loads much faster than intraday data, so the VWAP anchors are detected reliably even immediately after opening the chart. HOW TO USE Open the indicator settings and, for each of the 5 lines, set how many calendar days back you want that VWAP to start accumulating from. Use the lines as dynamic support/resistance or fair-value reference levels, similar to how a session VWAP is used, but for multi-day accumulation periods. NOTES - This script requires volume data from your data provider. If no volume is available for the symbol, the VWAP values will not calculate correctly. - "Rolling Days" counts calendar days, not trading/session days. Feedback and suggestions are welcome.

Chỉ báo

GMS Ultimate Indicator GMS Ultimate Indicator 9.0 is a customizable multi timeframe market structure and price action tool designed to help traders stay aligned with the dominant side of the market. It analyzes the Daily, 4H, 1H, 15M, 5M, and 1M trends using HH/HL and LH/LL structure, while identifying pullbacks, consolidation, liquidity sweeps, BOS, CHOCH, protected structure, reaction zones, retests, and rejection candles. Its setup engine helps locate higher probability entries within the broader trend, with adjustable alerts, dashboard layouts, and display settings. For analysis and educational purposes only. Use proper risk management and backtesting.

Chỉ báo

của whoisyungeli

GMS Ultimate Indicator GMS Ultimate Indicator is a customizable multi timeframe market structure and price action tool designed to help traders stay aligned with the market’s direction. It tracks 4H, 1H, 15M, and 5M trend conditions, structure state, and price position relative to selected EMAs. The indicator also identifies BOS, CHOCH, swing highs and lows, liquidity pools and sweeps, previous day/week levels, protected 1H structure, 4H reaction zones, retests, rejection candles, potential setups, targets, and alerts. Built for scalpers, intraday traders, and swing traders who use market structure and price action. For analysis and educational purposes only.

Chỉ báo

của whoisyungeli

GMS Ultimate Structure + Price Action GMS Ultimate Indicator is a customizable multi timeframe market structure and price action tool designed to help traders stay aligned with the dominant side of the market. It analyzes the Daily, 4H, 1H, 15M, 5M, and 1M trends using HH/HL and LH/LL structure, while identifying pullbacks, consolidation, liquidity sweeps, BOS, CHOCH, protected structure, reaction zones, retests, and rejection candles. Its setup engine helps locate higher probability entries within the broader trend, with adjustable alerts, dashboard layouts, and display settings. For analysis and educational purposes only. Use proper risk management and backtesting.

Chỉ báo

của whoisyungeli

KC Confirmed Order Blocks KC Confirmed Order Blocks is a rule-based educational indicator designed to display potential bullish and bearish reaction zones following confirmed breaks of market structure. A bullish order block is defined as the most recent bearish candle located before a confirmed bullish break above the latest pivot high. A bearish order block is defined as the most recent bullish candle located before a confirmed bearish break below the latest pivot low. Main features: • Confirmed pivot-based structure detection • Bullish and bearish break-of-structure confirmation • Full-candle or candle-body order-block ranges • Optional ATR displacement filter • Optional volume filter • Touch, midpoint and full-fill mitigation methods • Close-based or wick-based invalidation • Automatic management of active, mitigated and invalidated zones • Configurable number of visible zones • Bullish and bearish order-block alerts • Compact market-status dashboard Methodology: The indicator first identifies confirmed pivot highs and pivot lows. These pivots require the selected number of candles on both sides before they are confirmed. After a confirmed bullish break above the latest pivot high, the indicator searches backward for the nearest bearish candle within the selected lookback period. That candle's full range or body is displayed as a bullish order block. After a confirmed bearish break below the latest pivot low, the indicator searches backward for the nearest bullish candle. That candle's range is displayed as a bearish order block. Mitigation: Touch means price enters the nearest edge of the zone. Midpoint means price reaches 50% of the zone. Full Fill means price reaches the opposite edge of the zone. Mitigation only indicates that price has revisited the zone. It does not guarantee a reversal. Invalidation: A bullish order block is invalidated when price closes or trades below its lower boundary, depending on the selected setting. A bearish order block is invalidated when price closes or trades above its upper boundary. Limitations: Order-block identification is not universally standardized. This indicator applies a transparent rule-based definition so its behavior can be understood and evaluated consistently. All zones are calculated from historical price data. Marked zones may fail, become mitigated without reversal or be invalidated during volatile and news-driven market conditions. This script is intended solely for educational market analysis. It is not financial advice or a recommendation to buy or sell any financial instrument. Users should conduct independent analysis and apply appropriate risk management.

Chỉ báo

của Kelly_Carter12

Fractal Support & Resistance Zones invincible]Fractal Support & Resistance Zones Fractal Support & Resistance Zones is an advanced market-structure and price-reaction framework designed to identify, evaluate, and dynamically manage support and resistance zones derived from confirmed fractal pivots. Unlike traditional support and resistance indicators that simply draw horizontal levels at swing highs and lows, this indicator treats every zone as a dynamic market structure object. Each zone develops through its own lifecycle based on price interaction, independent retests, reaction strength, penetration, estimated buying and selling activity, structural confirmation, trend alignment, and eventual support/resistance role reversal. The objective is not simply to show where price previously turned. The objective is to evaluate which zones are still technically relevant, which have gained confirmation, which are weakening, and which may provide better structural trade locations. --------------------------------------------------------------------------------------------- Fractal-Based Zone Detection The indicator identifies two independent classes of fractal pivots: Weak Fractals Shorter-length pivots designed to capture local price reactions and minor structural turning points. Major Fractals Higher-strength pivots based on a larger fractal window. These represent more significant swing highs and swing lows and receive greater importance within the zone-quality model. Fractal support zones are created from confirmed pivot lows, while fractal resistance zones are generated from confirmed pivot highs. The detection timeframe can be independently selected, allowing zones from a higher timeframe to be displayed on a lower-timeframe chart. Higher-timeframe fractal data is requested with lookahead disabled to prevent future data from being intentionally introduced into the pivot calculation. --------------------------------------------------------------------------------------------- Dynamic Support and Resistance Zones The indicator creates price zones rather than single horizontal lines. Markets rarely react from one exact price. Orders, liquidity, and previous positioning are often distributed across a price range. The zone model therefore attempts to represent the broader reaction area surrounding a fractal pivot. Three zone-width methods are available: ATR Zone width is calculated from Average True Range and automatically adapts to market volatility. Pivot Candle The structure of the original fractal candle is used to determine the zone width. Hybrid Candle + ATR Combines pivot-candle structure with an ATR-based volatility limit. The hybrid method is designed to prevent unusually large pivot candles from creating excessively wide support or resistance areas. A minimum tick-based width can also be configured for instruments with very small price movements. --------------------------------------------------------------------------------------------- Fractal Zone Clustering Markets frequently produce several nearby fractal pivots around the same price area. Drawing every pivot independently can create overlapping boxes and unnecessary chart congestion. The indicator therefore includes a fractal clustering engine. Nearby same-side fractals may be merged into a common structural zone when: * They are within the configured ATR merge distance. * The resulting merged zone does not exceed the maximum permitted ATR width. * The maximum cluster count has not been exceeded. * Fresh major zones are not being merged into previously tested or damaged zones when protection is enabled. The cluster count becomes one component of the zone-quality model. A cluster does not automatically mean a zone is strong. It simply indicates that multiple independent fractal structures developed around a similar price area. --------------------------------------------------------------------------------------------- Independent Retest Detection A major feature of the indicator is the distinction between bars inside a zone and independent zone retests. If price remains inside a support or resistance area for several candles, those candles are not counted as multiple tests. A new test is counted only after price: 1. Interacts with the zone. 2. Moves sufficiently away from the zone. 3. Travels the configured ATR reset distance. 4. Returns to the zone again. This creates a more realistic retest model and avoids artificially increasing the test count during sideways congestion. The label displays the number of independent tests recorded for each selected zone. --------------------------------------------------------------------------------------------- ATR-Based Reaction Measurement After an independent zone retest, the indicator measures how strongly price reacts away from the zone. Reaction strength is normalized using ATR. For a support zone, the engine measures upward movement from the reaction anchor. For a resistance zone, the engine measures downward movement from the reaction anchor. The strongest reaction generated by the zone is stored as its **Best Reaction ATR**. Two configurable reaction thresholds are used: Verified Reaction The zone has produced the minimum ATR reaction required for technical validation. Proven Reaction The zone has generated a stronger ATR reaction and has also accumulated sufficient independent testing. This prevents a zone from receiving a high structural status simply because price briefly touched it. The market must demonstrate an actual directional response. --------------------------------------------------------------------------------------------- Dynamic Zone Status System Every zone is continuously classified according to its current structural condition. FRESH A newly created major zone that has not yet received an independent retest. Fresh zones may represent relatively untouched structural areas. WEAK A zone originating from the shorter weak-fractal detection model. Weak zones can still produce valid reactions but receive a lower fractal-grade contribution in the quality model. VERIFIED A zone that has been tested and remains structurally active. Reaction behaviour and zone validation contribute dynamically to its score. PROVEN A zone that has accumulated multiple independent tests and generated a reaction exceeding the configured Proven Reaction ATR threshold. Proven zones represent areas with demonstrated historical reaction behaviour. DAMAGED Price has penetrated a configurable percentage of the zone. A damaged zone has not necessarily broken, but deeper penetration reduces its quality score. BROKEN Price has invalidated the zone according to the selected break-confirmation method. Break confirmation can use either: * Close Beyond Zone * Full Candle Beyond Zone Broken zones may optionally remain visible for historical analysis. FLIPPED SUPPORT / FLIPPED RESISTANCE A previously broken zone has confirmed a structural role reversal. Previous support may become resistance. Previous resistance may become support. The indicator does not immediately flip a zone when price crosses it. A separate role-reversal confirmation process is required. --------------------------------------------------------------------------------------------- Zone Damage and Penetration Tracking Zone quality is not binary. A support or resistance area may gradually weaken before it completely breaks. The indicator continuously measures the maximum percentage of zone penetration. For support, penetration is measured downward through the support area. For resistance, penetration is measured upward through the resistance area. When penetration exceeds the configured damage threshold, the zone is classified as ** DAMAGED Damage also applies a progressive penalty to the quality score. This means a deeply penetrated zone may remain technically valid while receiving a lower structural ranking. --------------------------------------------------------------------------------------------- Support and Resistance Role Reversal The indicator contains a dedicated zone-flip engine. After a support or resistance zone breaks, the engine monitors whether price moves sufficiently beyond the former zone. The broken zone must first establish separation from price using a configurable ATR distance. Price must then return to the previous structural area. Depending on the selected confirmation mode, the indicator can require: Zone Reclaim Only The opposite-side retest itself is sufficient. Close Away Price must close a configurable ATR distance away from the zone. Rejection or Engulfing The retest can be confirmed through rejection behaviour, an engulfing candle, or a sufficiently strong close away from the zone. Once confirmed: * Broken support can become resistance. * Broken resistance can become support. The zone is then reset into a new lifecycle as a flipped structural area. --------------------------------------------------------------------------------------------- Estimated Buy and Sell Activity The indicator includes an estimated directional volume model. Because standard TradingView volume does not directly provide true executed bid and ask volume for every market, buying and selling activity is estimated from candle position within the candle range. A close nearer the candle high allocates a greater portion of volume to estimated buying activity. A close nearer the candle low allocates a greater portion of volume to estimated selling activity. The model can use: * Pivot volume only. * Pivot volume plus independent retest activity. Selected zone labels display estimated activity as: B 64% | S 36% This should be interpreted as an estimated directional participation model rather than true exchange-level order-flow delta. --------------------------------------------------------------------------------------------- Multi-Factor Zone Quality Model Every zone receives a dynamic quality score from 0 to 10. The score is not based on a single condition. The model combines several structural factors. Fractal Grade Major fractals receive a stronger contribution than weak fractals. Rejection Wick The pivot candle's rejection wick is normalized against ATR. Larger relative rejection can increase the origin score. Independent Retests The model evaluates how many genuinely independent zone tests have occurred. Importantly, unlimited retests do not continuously improve quality. Excessive testing can weaken a zone. Reaction Strength The strongest measured ATR reaction contributes to zone validation. Estimated Volume Confirmation Pivot volume participation and directional estimated activity contribute to the score. Fractal Cluster Multiple nearby fractals can increase structural confidence. Freshness Newer zones receive a greater freshness contribution. As a zone ages, this component gradually decreases. The weight of every major quality component can be adjusted by the user. --------------------------------------------------------------------------------------------- Origin Score and Validation Score Internally, the quality engine separates zone evaluation into two conceptual stages. Origin Quality Evaluates how the zone was created. This includes: * Fractal grade. * Pivot rejection wick. * Pivot volume participation. * Fractal clustering. * Zone freshness. Validation Quality Evaluates what price did after the zone was created. This includes: * Independent retests. * Reaction strength. * Directional estimated activity. Fresh zones are influenced more heavily by origin quality. As price begins interacting with a zone, validation behaviour receives greater influence. This allows the quality score to evolve with market behaviour rather than remaining permanently fixed at zone creation. --------------------------------------------------------------------------------------------- Retest Exhaustion Penalty A common assumption is that more support or resistance tests always make a zone stronger. This indicator does not use that assumption. Repeated interaction may gradually consume resting liquidity around a price area. After the configured number of retests, the indicator begins applying an excess retest penalty. The penalty increases with each additional independent test. As a result, a heavily tested zone may receive a lower quality score even if it has not formally broken. --------------------------------------------------------------------------------------------- Congestion Penalty Price remaining inside a zone for an extended period may indicate balance, absorption, or structural deterioration. The indicator tracks consecutive bars interacting with each zone. After the configured congestion threshold, a progressive quality penalty is applied. This helps distinguish a clean rejection from prolonged price acceptance inside the area. --------------------------------------------------------------------------------------------- Trend Regime Alignment An optional EMA-based trend regime is included in the quality model. Support zones located in an unfavourable bearish regime can receive a counter-trend penalty. Resistance zones located in an unfavourable bullish regime can also receive a penalty. The trend filter does not automatically delete zones. Instead, it modifies their relative quality. This allows historically valid support and resistance areas to remain visible while acknowledging the current directional regime. --------------------------------------------------------------------------------------------- Market Structure Break Detection The indicator includes an independent Market Structure Break, or **MSB**, engine. Confirmed swing highs and swing lows are detected using a configurable pivot length. A bullish MSB occurs when price closes above the latest eligible structural high with sufficient momentum confirmation. A bearish MSB occurs when price closes below the latest eligible structural low with sufficient negative momentum confirmation. Momentum is normalized using a Z-score calculated from recent price changes. This reduces the number of minor structural crossings classified as meaningful breaks. Each structural pivot can generate only one MSB event, preventing repeated labels from appearing after the same swing has already been broken. --------------------------------------------------------------------------------------------- Zone-to-Structure Confirmation Market Structure Breaks can also validate previously tested zones. When a bullish MSB occurs, the indicator searches for a recently touched support zone. When a bearish MSB occurs, it searches for a recently touched resistance zone. The most recent eligible zone can receive structural confirmation. A configurable quality bonus is then applied. This creates a basic structural sequence: Zone interaction → Price reaction → Market Structure Break The intention is to distinguish zones that merely produced a temporary bounce from zones followed by a measurable structural shift. --------------------------------------------------------------------------------------------- Premium and Discount Trade Location The indicator uses the latest structural swing high and swing low to estimate the current swing midpoint. The midpoint represents the 50% equilibrium level of the structural range. When Premium/Discount grading is enabled: * Support zones are favoured when positioned in the discount portion of the swing. * Resistance zones are favoured when positioned in the premium portion of the swing. This condition contributes to the displayed Trade Grade. It does not remove zones from the chart. --------------------------------------------------------------------------------------------- Trade Grade System Selected zones receive a simplified structural trade grade. Grade A+ Reserved for high-quality zones with strong alignment between: * Zone quality. * Trend regime. * Premium/discount location. * Low structural damage. * Limited retest exhaustion. Grade A Strong-quality zones with favourable trend alignment and low damage. Grade B Moderate-to-strong structural zones that are not classified as weak fractals. Grade C Lower-quality but still technically visible zones. Grade D Zones with poor overall structural quality. The Trade Grade is a contextual ranking system. It is not an automatic buy or sell signal. --------------------------------------------------------------------------------------------- Star-Based Quality Display To make the detailed labels easier to read, the numerical quality model is represented using stars. ★★★★★ = Quality 8.0 or higher ★★★★ = Quality 6.0 to 7.99 ★★★ = Quality 4.0 to 5.99 ★★ = Quality 2.0 to 3.99 ★ = Quality below 2.0 The stars provide a quick visual representation of the underlying 0–10 quality score. --------------------------------------------------------------------------------------------- Compact Detailed Labels Selected zones can display compact one-line labels such as: VERIFIED SUP | B 64% | S 36% | ★★★★ | Tests: 2 | Grade A The label contains: * Current zone status. * Support or resistance classification. * Estimated buying activity. * Estimated selling activity. * Quality stars. * Independent retest count. * Structural Trade Grade. Because displaying a detailed label on every zone can create significant chart congestion, two label modes are available. Nearest + Strongest Prioritizes the nearest support, nearest resistance, and the highest-quality remaining zones. All Visible Zones Displays labels for every currently visible zone. The maximum number of detailed labels can also be controlled. --------------------------------------------------------------------------------------------- Nearest Zone Highlighting The indicator continuously identifies: * The nearest active support below price. * The nearest active resistance above price. These zones can receive stronger border highlighting. This makes the most immediately relevant structural areas easier to identify without removing historical zones from the chart. --------------------------------------------------------------------------------------------- Structural Equilibrium Zone The latest confirmed structural swing high and swing low are used to calculate a 50% equilibrium area. The indicator plots: * Swing origin. * Swing destination. * 50% midpoint. * Configurable equilibrium zone thickness. Before price interacts with the equilibrium area, the zone is displayed as the current structural midpoint. After price touches the area, the indicator changes its state to: Equilibrium touched · wait for structure This is intended to remind the trader that equilibrium interaction alone is not necessarily directional confirmation. Additional market structure may be required. --------------------------------------------------------------------------------------------- Alert Conditions The indicator provides alert conditions for important zone and market-structure events: * New fractal support zone. * New fractal resistance zone. * Independent zone retest. * Zone verified by ATR reaction. * Zone reaching Proven status. * Zone becoming Damaged. * Zone break. * Support/resistance role reversal. * Bullish Market Structure Break. * Bearish Market Structure Break. These alerts can be used to monitor structural changes without continuously watching the chart. --------------------------------------------------------------------------------------------- Suggested Interpretation This indicator is designed as a market context and structural analysis tool. A possible analytical workflow is: 1. Identify the nearest active support and resistance. 2. Review the zone's current status. 3. Check estimated buy/sell activity. 4. Evaluate the quality stars. 5. Review the independent test count. 6. Check whether the zone is fresh, validated, damaged, or exhausted. 7. Evaluate trend alignment. 8. Check premium or discount location. 9. Observe whether price produces a structural break after the zone reaction. 10. Use the Trade Grade as an additional contextual ranking. No single factor should be interpreted independently. A five-star zone can still break. A damaged zone can still generate a reaction. A weak fractal can still become structurally relevant. The purpose of the model is to organize multiple price-action variables into a consistent framework. --------------------------------------------------------------------------------------------- Important Volume Note The Buy and Sell percentages displayed by this indicator are estimated directional volume statistics. They are calculated by allocating candle volume according to the closing position within the candle's high-low range. They do not represent true bid/ask volume, footprint delta, or exchange-level aggressive buying and selling. The values should therefore be used as a relative activity estimate only. --------------------------------------------------------------------------------------------- Non-Repainting Considerations Fractal pivots require confirmation bars. A zone is created only after the corresponding pivot has been confirmed by the selected fractal length. Higher-timeframe fractal calculations use `lookahead_off`. Therefore, historical zones should be interpreted from the point at which the fractal became technically confirmed rather than assuming the pivot was known at the exact swing candle in real time. Market Structure Break conditions are also evaluated using confirmed price and momentum conditions. --------------------------------------------------------------------------------------------- Final Note Fractal Support & Resistance Zones is designed for traders who prefer **dynamic structural zones instead of static support and resistance lines**. The indicator combines fractal structure, volatility-normalized zone construction, independent retests, reaction measurement, damage analysis, estimated directional activity, structural breaks, trend regime, premium/discount location, and role reversal into a unified zone lifecycle model. It is intended to help answer three practical questions: Where is the important price structure? How has price behaved around that structure? Is the zone gaining validation, remaining fresh, or gradually losing structural quality? This indicator is intended for technical analysis and research purposes only. It does not constitute financial advice. Traders should independently evaluate market conditions and apply appropriate risk management.

Chỉ báo

của invincible3

Market Zone [Jannu]1. Description Markets do not move in straight lines. Price frequently departs from equilibrium through gaps, rapid displacement, or impulsive expansion from compressed bases. These departures leave behind areas of unresolved imbalance; zones where the auction process was incomplete. Market Zone is the foundational Imbalance component of the ET Massif Framework research suite. It identifies three distinct forms of such imbalance and renders them as dynamic, self-managing zones on the chart. 2. Features The indicator combines three detection methods: Fair Value Gaps (FVGs) Three-candle imbalances where a qualifying middle candle displaces price fast enough that the gap between the outer candles remains unfilled. Detection requires ATR expansion, minimum gap size, VWAP position relative to the gap, volume, and candle body proportion. Session Gaps Price discontinuities between consecutive session closes and opens, filtered by ATR magnitude. Points of Interest (POI) The consolidation base that preceded a significant impulsive move. Once an impulse exceeding a defined ATR multiple is confirmed, the indicator locates the tight-range candle immediately before the expansion and uses its high/low as the zone boundary. 3. Detection Logic A. Fair Value Gaps (FVG) Detected using a qualified three-candle imbalance structure. Criteria: Low > High (Bullish) or High < Low (Bearish) Middle candle range > 1.1× ATR Gap size > 1.0× ATR Middle candle VWAP above High (Bullish) or below Low (Bearish) Volume > 1.2× 180-bar average volume Candle body > 65% of total range Qualifying FVGs display a diamond marker at the middle candle VWAP. Diamond size scales with relative volume. Boxes extend forward with each new bar and contract as candle bodies close into the zone. Zones are removed once fully covered. B. Session Gaps (FVG) Detects price discontinuities between the current open and the prior close. Criteria: Absolute gap > 1.5× ATR Gap boxes are drawn between the prior close and the current open, extend forward, and contract as candle bodies close into them. Zones are removed once fully covered. C. Points of Interest (POI) Identifies the consolidation base preceding a significant directional expansion. Criteria: An impulsive move within the previous 5 bars exceeding 2.0× ATR Majority of bars within the move are directional Once an impulse is confirmed, the indicator searches the preceding bars for the first candle whose range is below 0.5× ATR. That candle's high and low define the POI zone. A 20-bar cooldown prevents overlapping detections. Zones are invalidated when a candle body closes through the zone boundary. Invalidated zones remain on the chart in grey. All criteria are configurable via settings. Use stricter rules for lower timeframes or volatile assets. 4 . Use Jannu is a structural reference tool. The zones mark where price departed from equilibrium; Determining which outcome is unfolding requires the broader analytical context in which the indicator is used. The same zone type can carry different interpretations depending on context. On the CRWD daily chart in early 2026, a cluster of large bearish FVGs formed during a sharp sell-off, yet price reversed immediately and never returned to those zones. The imbalance was not evidence of sellers in control; it was the mechanism through which aggressive selling exhausted supply before buyers drove price upward. Contrast this with the series of bearish FVGs that formed during ADBE's long decline from late 2024. Same structure, different character. The indicator marks the zone; contextual analysis is required. 日本語概要 (Japanese Summary) Jannuは、価格が均衡から乖離した領域を可視化するリファレンス指標であり、ET Massifインジケーターフレームワークの一部として開発されました。セッションギャップ、フェアバリューギャップ（FVG）、ポイント・オブ・インタレスト（POI）の3種類の価格不均衡を検出し、動的なゾーンとしてチャート上に表示します。これらのゾーンは、ローソク足の実体が内部に進入するにつれて縮小し、完全に埋まった時点で自動的に削除されます。市場構造の参照フレームワークとして機能します。中文概要（Chinese Summary） Jannu 是一款將價格偏離均衡的區域進行視覺化呈現的參考指標，作為 ET Massif 指標框架的一部分所開發。本指標可偵測三種價格失衡類型：開盤缺口（Session Gap）、合理價值 gap（FVG）以及關注區域（POI），並將其作為動態區間顯示於圖表上。這些區間會隨著 K 線實體進入而縮減，並在完全填補時自動刪除。本指標作為市場結構的參考框架使用。 Disclaimer: This script is a research tool for market structure analysis and educational purposes only. It does not constitute financial advice. Trading involves risk.

Chỉ báo

của et20tradeview

AlgoZ Pro Price Action AlgoZ Pro Price Action is a clean price action based forex indicator built to help traders identify potential Buy, Sell, and Exit areas using a combination of market structure, trend filtering, volatility logic, and dynamic trade management. This indicator is designed around the idea that not every trade needs to have a high win rate to be useful. Instead of only looking for quick scalp targets, AlgoZ Pro Price Action is built to manage trades with a runner-style approach. The goal is to cut weak trades faster, protect trades that start moving in the right direction, and allow stronger moves to continue when momentum is present. The default settings are best suited for 1-minute EUR/USD forex trading. Other forex pairs and timeframes may work differently and should be tested before use. The indicator uses market structure breaks to identify possible directional shifts. When price breaks key internal support or resistance levels, the script checks multiple filters before plotting a signal. These filters are designed to reduce low-quality signals during chop, weak momentum, or overextended conditions. AlgoZ Pro Price Action includes Buy, Sell, and Exit labels directly on the chart. Buy signals are shown in teal, Sell signals are shown in pink, and Exit signals are shown in a neutral color. The bars can also be colored based on the active signal direction so it is easier to visually track the current market bias. One of the main parts of this indicator is the trend lock system. The trend lock helps prevent the indicator from flipping back and forth too quickly during noisy market conditions. It uses EMA trend structure, slope behavior, and confirmation bars to decide whether the market is currently favoring Buy-side or Sell-side continuation. Countertrend signals must be stronger before they are allowed through, which helps reduce random reversal signals during an active move. The indicator also includes automatic forex pair adjustment. It detects whether the chart is a JPY pair or a non-JPY forex pair and automatically adjusts pip size calculations. This helps prevent issues where a stop or exit calculation is too tight or too wide because of the symbol’s price format. The script also includes auto volatility tuning, which uses ATR-based logic to scale stop size, runner triggers, trailing stop distance, dead-trade protection, and cooldown behavior based on the current pair’s movement. Trade management is handled through a dynamic exit engine. Instead of using only fixed take profit levels, the indicator uses runner logic. Once a trade moves far enough in profit, the trade can enter runner mode. From there, the script can move the stop, protect profit, and trail the trade if the move continues. This allows stronger trades to breathe while still giving the indicator a way to exit when momentum fades. AlgoZ Pro Price Action also includes dead-trade protection. If a trade has been open for a certain number of bars and has failed to make meaningful progress, the script can plot an Exit signal. This is designed to help remove weak trades that are not moving enough to justify staying in them. The indicator includes several optional filters and controls, including EMA trend filtering, ADX strength filtering, chop filtering, candle body quality filtering, minimum EMA separation, price distance from the slow EMA, overextension protection, post-exit cooldown, and emergency protection logic. Main features include: • Buy, Sell, and Exit labels • Teal and pink AlgoZ Pro visual theme • Price action and market structure based signals • Internal support and resistance break logic • Optional BOS / CHoCH structure markings • EMA trend filtering • ADX trend strength filter • Chop and range filter • Candle quality filter • Trend lock system • Countertrend signal protection • Auto pip size detection • Auto adjustment for JPY and non-JPY forex pairs • ATR-based auto pair tuning • Dynamic stop logic • Runner-style trade management • Breakeven / profit lock logic • Trailing stop logic for stronger moves • Dead-trade exit protection • Optional bar coloring • Optional entry and stop lines • Optional status table Recommended default use: 1-minute EUR/USD forex chart. Other forex pairs and timeframes may require adjustment depending on spread, volatility, session, and market conditions.

Chỉ báo

của rowdyllama

HTF Support/Resistance Multi-Tap The HTF Multi-Tap S/R Zones is an advanced structural indicator designed for lower timeframe traders who need higher timeframe confluence without cluttering their charts. Instead of drawing infinite lines everywhere, this indicator tracks historical pivot points from a Higher Timeframe (HTF) of your choice and dynamically builds highly-validated "Zones of Interest" directly onto your current chart. It is specifically engineered to find areas where price has repeatedly struggled to break through. Core Features: Dynamic Wick Absorption (Zones): When price wicks into the same general area, the script doesn't just plot a single static line. It dynamically expands the top and bottom borders of a "Zone" to encompass the full range of the historical wicks, giving you a literal block of rejection to trade against. Zone Merging: If two adjacent zones expand enough to touch each other, the indicator will seamlessly merge them into one massive, highly significant structural block. Volume & Tap Tracking: Every time price taps a zone, the script records the touch and pulls the exact volume that occurred on that HTF candle. The zone's label clearly displays the total accumulated volume and the number of taps it took to build it. Automated Volume Grading: The indicator continuously scans the active zones on your chart and automatically tags the zone with the absolute highest historical volume with a (⭐ Max Vol) label, instantly showing you the strongest defensive wall on the board. Clean & Focused: By default, it only displays the 3 closest Support zones and the 3 closest Resistance zones to the current price, keeping your chart clean and focused strictly on the levels that matter right now. How to Use (Confluence): This is not a standalone entry signal; it is a confluence tool. If you are trading on a 1-minute or 5-minute chart, set the indicator's HTF to 15m or 1H. Use these projected zones as high-probability areas to look for your lower timeframe entry models (like break of structure, fair value gaps, or engulfing candles). The (⭐ Max Vol) zones are prime locations for strong reversals or major breakout continuations. Settings: Higher Timeframe: Choose which timeframe to pull structural pivots from. Proximity Threshold %: Adjust how close price needs to come to an existing zone to be considered a "Tap" and expand the box. Increase this slightly for highly volatile assets to absorb larger wicks. Minimum Taps: Determine how many times a level must be tested before it is considered valid and plotted on your screen.

Chỉ báo

của BarrettFVG

Fibonacci Levels Engine [StrixEDGE]What It Does Fibonacci Levels Engine automatically detects the most recent swing high and swing low within a configurable lookback window, draws the standard Fibonacci retracement grid (0 %, 23.6 %, 38.2 %, 50 %, 61.8 %, 78.6 %, 88.6 %, 100 %) plus the 127.2 % and 161.8 % extensions, and projects every level into the future so you can see where price is heading relative to the structure. What separates this indicator from a plain Fibonacci overlay is the Edge Analysis layer — three original components that work together to tell you how meaningful a given Fibonacci zone is right now, not just where it sits on the chart: 1. Edge Score (0–100) — A composite confluence gauge displayed in the dashboard. 2. Proximity Heatmap — Dynamic line opacity that makes levels glow as price approaches them. 3. ATR Volatility Band — A band around the Golden Zone midpoint that adapts to current volatility. How It Works Core: Swing Detection & Fibonacci Grid The indicator scans the last N bars (default 20, configurable 5–300) to find the highest high and lowest low. It determines trend direction by comparing which extreme occurred first: if the swing low is further back in time than the swing high, the structure is bullish (price moved from low to high); otherwise it is bearish. Fibonacci ratios are then calculated from that range and drawn as horizontal levels from the swing origin to a user-defined projection length (default 30 bars into the future). Two shaded zones highlight areas of interest: - Golden Zone (0.618–0.786) — the highest-probability retracement area in classical Fibonacci theory. - Deep Zone (0.786–0.886) — often the last line of defense before a full retracement. Both zones, the 50 % midline, and the extension levels can be toggled on or off independently. Edge Score — Confluence Gauge The Edge Score combines three independent measurements into a single 0–100 reading: RSI Momentum Alignment | 0–35 | In a bullish structure, a low RSI (below 35) scores highest because it signals oversold conditions near support. In a bearish structure, a high RSI (above 65) scores highest. Intermediate RSI values receive proportionally lower scores. | | Proximity to Golden Zone | 0–35 | Measures the absolute distance between the current close and the Golden Zone midpoint as a ratio of the total Fibonacci range. The closer price is to the midpoint, the higher the score. | | EMA Trend Alignment | 0–30 | Checks the stacking order of the 8, 21, and 55-period EMAs. A fully aligned stack (e.g., EMA 8 > EMA 21 > EMA 55 in a bullish structure) scores 30; partial alignment scores 20; misalignment scores 10. | The resulting score is classified as STRONG (≥ 75), MODERATE (≥ 50), WEAK (≥ 25), or LOW (< 25) and displayed with a color-coded label in the dashboard. A high Edge Score means RSI, price proximity, and trend direction are all converging at the Fibonacci zone — not just that price touched a line. Proximity Heatmap Every Fibonacci level's line opacity is recalculated on each bar based on how far the current close is from that level. When price is near a level, the line becomes more opaque (visually brighter); when price is far away, the line fades. This is computed as a transparency value derived from the ratio of (distance to level) / (total Fibonacci range), scaled between 10 and 75. The effect lets you instantly see which levels are "active" without scanning numbers — the relevant lines stand out on their own. ATR Volatility Band A translucent band is drawn around the Golden Zone midpoint, extending ± 0.5 × ATR (default 14-period). This addresses a practical problem: a Fibonacci level is a single price, but real entries need a buffer that accounts for market noise. The band widens in volatile conditions and contracts in quiet ones, giving you a dynamic "fair value area" inside the Golden Zone rather than a fixed line. Dashboard Panel A compact table in the top-right corner of the chart displays: - Trend — Current structural direction (Bull / Bear) with color coding. - Edge — The composite Edge Score and its label. - RSI — Current RSI value, color-coded for overbought/oversold extremes. - G-Zone — Live status showing ✅ with the midpoint price when the close is inside the Golden Zone or ⏳ Waiting when it is outside. - ATR — Current Average True Range value. - Range — The total Fibonacci range (swing high minus swing low). Dashboard text size is adjustable (Tiny / Small / Normal / Large). How to Use It Identify the structure — Add the indicator to your chart. The dashboard immediately tells you whether the current swing structure is bullish or bearish and shows the Edge Score. Watch the Golden Zone — When price pulls back toward the 0.618–0.786 area, check the dashboard: a high Edge Score (50+) means RSI and trend EMAs are aligned with the retracement, which increases the odds of a bounce. The G-Zone row will switch from ⏳ to ✅ when price enters the zone. Use the Volatility Band for entries — Rather than placing a limit order on the exact 0.618 or 0.786 line, use the ATR band as your entry zone. It automatically adjusts to current volatility, giving you a wider buffer in choppy markets and a tighter one in clean trends. Read the heatmap — Glowing lines tell you which levels price is currently interacting with. If a line is bright and the Edge Score is high, that level carries more weight. If the line is faded, price is far away and the level is not in play. Settings Overview - Pivot Lookback (5–300, default 20) — Number of bars scanned for swing high/low detection. - Right Projection (5–200, default 30) — How far levels extend into the future. - Golden Zone / Deep Zone / 50 % / Extensions — Toggle individual level groups. - Edge Score Panel — Show or hide the dashboard. - ATR Volatility Band — Show or hide the dynamic band. - Proximity Heatmap — Enable or disable the distance-based line opacity effect. - ATR / RSI Length — Periods for the ATR and RSI calculations used in the Edge Score and Volatility Band. - Style — Full color customization for bullish/bearish, zones, bands, levels, labels, and line width. Set alerts — Four built-in alert conditions are included: - Price enters the Golden Zone (0.618–0.786) - Price enters the Deep Zone (0.786–0.886) - Edge Score reaches 75 or above (strong confluence) - Price crosses the 0 % or 100 % level (breakout / full retracement)

Chỉ báo

của StrixEDGE

Opening Range Breakout ORB - Signals, Targets & Alerts [LunqFX]The Opening Range Breakout (ORB) is one of the most traded intraday strategies — but most ORB indicators only draw the opening range box and leave you guessing. This Opening Range Breakout indicator goes further: it marks the opening range, detects the first genuine breakout, filters fakeouts, projects measured-move targets, and — uniquely — builds a live breakout statistics engine from the last 100 trading days of the symbol on your chart. What makes this ORB indicator different Instead of a static box, you get a data-driven read on how your market actually behaves after the opening range: First-break direction split — how often the day breaks up vs down Hold rate — how often the first breakout direction holds into the close Fakeout rate — how often the first breakout fails back inside the range Target hit rates — how often price reaches 1x and 2x the opening-range height So before you take the trade you can see, for example, that on this symbol the upside breakout holds into the close 62% of the time and the 1R target is reached on 48% of breakout days. How the opening range breakout is calculated Auto mode works on every market with zero setup. The opening range starts at each day's open of the symbol's own exchange — stocks at the 09:30 session open, crypto at the 00:00 UTC daily open, forex and futures at their session open — and lasts a chosen number of minutes (the classic 5-minute, 15-minute or 30-minute ORB). A Custom mode lets you define any session window, such as the London or New York open. When the opening-range window closes, the range high and low are locked and projected forward as levels. The first candle close beyond the range (or wick, if you prefer) is treated as the breakout. Targets are projected at 1x and 2x the range height in the breakout direction. A close back inside the range before the first target is reached is flagged as a fakeout. A breakout that reaches 1R first and only then returns is counted as a valid breakout, not a fakeout. At the end of each trading day the outcome is recorded — direction, hold, fakeout, targets — and the dashboard percentages are plain rolling hit rates. No repainting, no curve fitting. How to use it Breakout day trading: trade the first breakout with more context — use the hold rate to judge whether the break on your symbol is worth taking, and size your target from the 1R / 2R hit rates. Fakeout fade: when a symbol shows a high fakeout rate, the failed breakout back inside the range is often the better setup; the fakeout is marked in real time. Range-quality filter: the dashboard shows the opening range as a multiple of ATR, so you can skip abnormally small ranges that tend to break out randomly. Works on any symbol and any intraday timeframe (1m–15m recommended): index futures and CFDs (NAS100, SPX500, US30, NQ, ES), stocks and ETFs (SPY, QQQ), gold (XAUUSD), Bitcoin and crypto, and forex majors. Dashboard A clean on-chart panel shows today's live status (building range → inside range → breakout → target hit or fakeout), the opening-range high/low and its size in ATR, and the full statistics block with the sample size always visible. Settings Auto anchor (any market, zero setup) or fully custom session window with timezone control — 5 / 15 / 30-minute ORB or any session open Close-based or wick-based breakout logic Adjustable target multiples, rolling statistics window, and visuals Alerts for range locked, breakout up, breakout down, fakeout, target 1 and target 2 Optional gradient momentum candles that can be switched off No repainting The opening range is fixed the moment its window closes. Breakouts, fakeouts and targets are confirmed on closed bars only, and the statistics are built exclusively from completed trading days — never recalculated backwards. This indicator is an educational market-analysis tool, not financial advice. Historical statistics describe past behavior and are not a guarantee of future results. Always confirm with your own analysis and manage your risk.

Chỉ báo

Edo Order Blocks Edo Order Blocks — Displacement-Detected Order Blocks Scored 0-100, with Active / Tested / Mitigated States and a Strongest-Block Panel An order block is the last opposite candle before an impulse that breaks away from a level — the last bearish candle before a sharp move up, or the last bullish candle before a sharp move down. In the Smart Money Concepts approach, that candle marks a zone where institutional activity was left unfilled, so when price returns to it, it becomes a natural reference of supply or demand. The problem with most order block tools is that they draw every zone, cluttering the chart with references that never mattered. Edo Order Blocks takes the opposite approach: it scores each zone and draws only the ones that earn it. Edo Order Blocks detects order blocks by displacement, scores each one from 0 to 100 on objective quality factors, filters out the weak ones, and tracks every surviving zone through its full life — from Active to Tested to Mitigated. Everything is validated on closed bars, so the indicator does not repaint. It is the order-block specialist of the Edolab structure family, designed to pair with Edo Smart Money Map, which maps the BOS / CHoCH structure around these zones. DISPLACEMENT DETECTION A new order block is triggered by a displacement: a confirmed candle that closes beyond the highest high (bullish) or lowest low (bearish) of the last N bars, in the direction of its own body. The Displacement Lookback input (10 by default) sets how many bars define that range. This impulse-based trigger captures the moment price breaks away with conviction, which is precisely when an order block is left behind. From the impulse, the indicator looks back up to the Origin Lookback (15 by default) to find the last opposite candle — the origin of the move — and draws the zone between its high and low. THE QUALITY SCORE Every candidate order block is scored from 0 to 100 before it is drawn, combining four objective factors: body strength (the candle's body relative to ATR), volume strength (volume relative to its 20-period average), displacement strength (how far the close pushed beyond the range, in ATR units), and trend alignment (whether the block sits on the right side of the EMA 50). Body and volume weigh 30% each, displacement and trend alignment 20% each. The Minimum Score input (40 by default) acts as a filter: only blocks that score at or above it ever reach the chart. Raise it to keep only the highest-conviction zones; lower it to see more. The score is printed on each block's label, so its quality is visible at a glance. ORDER BLOCKS AND THEIR LIFE Each drawn zone is a box between the high and low of the origin candle, labelled Bull OB or Bear OB with its score, extended to the right as a live reference. To keep the chart clean, only the most recent blocks per side are kept, up to Max Order Blocks per side (8 by default); older ones are removed as new ones appear. THREE STATES: ACTIVE, TESTED, MITIGATED Unlike a simple active/used flag, Edo Order Blocks tracks three states, evaluated on every closed bar. Active: a fresh zone price has not touched since creation — a solid box extending to the right. Tested: price has tapped the zone but not closed through it — the border turns solid and bold, marking that the zone has been challenged and held. Mitigated: price has closed through the zone — the box turns dashed, fades and stops extending, recording that the zone has been consumed. The Touch Mode input decides what counts as a test: Wick (default) marks it as soon as a wick reaches the zone, while Close requires a candle to close inside it. A bullish block is mitigated when price closes below its base; a bearish block, when price closes above its top. Each transition fires its own alert. INFORMATION PANEL The panel condenses the read into a compact table. It shows the number of active order blocks on each side, the Strongest OB — the highest-scoring active block, with its side, score and price level — and the active Minimum Score filter. The Strongest OB row is the quickest way to find the single zone the indicator rates highest right now. The panel sits in any of the four chart corners (Top Right by default), comes in three sizes (Tiny / Small / Normal) and two themes (Dark / Light), and can be hidden entirely. NO REPAINTING Displacement is validated on closed bars only, using the highest/lowest of completed candles offset by one bar, so a zone never appears or disappears intrabar. A wick that pierces a level but closes back inside generates nothing — the indicator waits for the close. This removes the false zones that clutter tools which react instantly, at the cost of confirming each block once the impulse has completed. There are no higher-timeframe functions: all logic runs on the current chart timeframe. CONFIGURATION The inputs are grouped by block. Detection sets the displacement lookback, the origin lookback and the minimum score. Order Blocks sets the maximum per side and the touch mode (Wick / Close). Style exposes the bull and bear colours, the zone opacity, whether the score is shown on the label, the label size and the Dark/Light theme. Panel controls panel visibility, position and size. The defaults are calibrated to work without adjustment on stocks, crypto, forex, indices and futures, on any timeframe — the only input most users tune is the Minimum Score, to make the indicator more or less selective. ALERTS Six predefined alerts cover the full life of a zone: New Bull OB and New Bear OB fire when a fresh order block above the score threshold is created; Bull OB Tested and Bear OB Tested fire when price first taps a zone; and Bull OB Mitigated and Bear OB Mitigated fire when price closes through a zone and consumes it. The new-block alerts flag fresh references, the tested alerts fire exactly when a zone is challenged, and the mitigation alerts mark when a reference is spent. All alerts fire on bar close, consistent with the indicator's anti-repaint validation. HOW TO READ IT A clean reading uses the score and the states together. High-score zones are the references worth watching: a Bull OB scored 80 sits on a strong-bodied, high-volume, trend-aligned impulse, a far more reliable demand zone than one scored 45. Watch the Active-to-Tested transition: when price returns to an active block and taps it, the zone is being challenged — the bold border marks the moment of reaction. A Tested block that holds and sends price away keeps its relevance; a Mitigated one has been consumed and steps aside. The Strongest OB panel row points to the single best active zone at any time, and pairing Edo Order Blocks with Edo Smart Money Map places these scored zones inside the broader BOS / CHoCH structure for full context. OPEN SOURCE Edo Order Blocks is published as a free open source indicator. The full Pine Script is publicly accessible on TradingView for study, adaptation and integration into any workflow. Part of the Edolab Markets free tools ecosystem alongside Edo Smart Money Map, Edo Liquidity Zones, Edo ZigZag Auto Fib SR, Edo Multi Stoch and more available on TradingView. This indicator is a technical analysis tool for educational and informational purposes only. It does not generate automatic buy or sell signals and should not be considered financial advice. Trading financial markets involves significant risk of capital loss. Past performance does not guarantee future results. Always use proper risk management.

Chỉ báo

của EdoLab-Markets

Futures Sessions with NY Opening Range, Levels, FVGs, & Holidays This is a session-anchored intraday framework for futures. Every element on the chart is derived from the same session definitions, so the tools stay consistent with each other: the sessions paint the ranges, the completed ranges leave behind levels, the level lifecycle is tied to the session clock, the NY Opening Range anchors the morning, fair value gaps give context inside the ranges, and holiday markers explain the days when sessions are missing or shortened. Session Ranges Each market session is defined using IANA names (America/New_York, Asia/Tokyo) – never fixed UTC offsets. The indicator renders identically no matter what timezone your chart is set to (Exchange, New York, etc). Daylight saving is handled automatically: New York flips between EST and EDT on its own, and Tokyo has no DST, so its position against the New York clock simply shifts with the US clock changes (Tokyo's 9:00 open lands at 20:00 New York in summer, 19:00 in winter). Each session is a shaded fill: Asia in red, London in yellow, New York in blue as defaults. NY Pre-Open: a dotted range tracks the morning trade from the ORB open at 8:00 America/New_York until the session fill starts at 9:30. It is derived from the ORB input, so moving the ORB moves it too. Globex Open: the CME futures trading day opens at 18:00 America/New_York (17:00 Chicago), indicated by the pre-open dotted range before the session fill starts at Tokyo open when volume comes in. New York Opening Range (ORB) The ORB captures the range of the America/New_York 8:00–8:15 candle, shown as a box with a dashed midline in maroon. It is visible on all smaller timeframes and up to 1h. The ORB ends on the last candle of the New York session — the end time is derived from the NY session input, so the two can never drift apart. If the ORB range is oversized (18 or more points, configurable), the box is flagged with a red "ORB INVALID" label and shows the range in points. Sessions Levels (Untested Highs and Lows) When a session completes, its final highs (black) and lows (teal) are drawn from the candle and extend to the right indefinitely until a level is tested on its first touch. You can configure whether a test means a wick touch (ICT/liquidity style, the default) or a candle close beyond the level (support/resistance style). Tested levels stay on the chart until the session running at the time of the test ends, so you can use them as points of reference until then. During the London/NY overlap, New York counts as the running session. A level tested during a session gap survives the gap and is handed to the next session that opens. At the NY ORB open at 8:00, all tested levels are removed to prevent clutter. Untested levels never expire. You can toggle the prices on the price scale on or off based on preference. Fair Value Gaps Classic three-candle imbalances in both directions: bullish when a candle's low is above the high from two candles back, bearish when a candle's high is below the low from two candles back. Gaps are shaded in green (by default, configurable) from the middle candle and extend to the right until price trades fully through it (bullish: a low at or below the gap bottom; bearish: a high at or above the gap top), then it is removed. Each gap can draw its Consequent Encroachment — a dashed line at the 50% of the gap, the level where a gap is commonly considered mitigated. Inputs: fill color, CE toggle and color, minimum gap size in points (useful on low timeframes), and a cap on how many gaps are kept. Holiday Markers US (NYSE) holidays: a dotted vertical line and a Statue of Liberty marker anchored to the ORB's first candle. Detection is fully rule-based — weekday-observance rules for every holiday, and Good Friday computed from the Easter algorithm (Butcher's computus), so nothing is hardcoded and no yearly maintenance is needed. Note: NYSE does not observe New Year's on the prior Friday when January 1 falls on a Saturday, and holidays observed on a Friday/Monday (like July 4 on a weekend) are marked on the actual closure day. Japanese holidays: a dotted vertical line and a shrine marker anchored to the Tokyo session's first candle. Covers the fixed-date holidays, the Happy Monday holidays, both equinox holidays (astronomical formulas, valid through 2150), Monday substitute holidays, the occasional Silver Week citizens' holiday, and the TSE year-end closures (Dec 31, Jan 2, Jan 3). Markers sit at the bottom of the pane. Days when CME is fully closed have no bars, so there is nothing to mark — markers appear on holidays with shortened or normal trading. Alert One built-in alert condition: Tokyo Range Break — fires when price closes outside the completed Tokyo session range, active from the Tokyo close until 11:30 New York time. How to Use Built for intraday charts of 1h and below (it draws nothing on higher timeframes). The ORB needs a 15-minute chart or lower to line up with whole candles. Defaults are tuned for CME index futures (ES/MES); the session inputs work on any symbol with continuous futures-style hours. Old drawings persist until Pine's 500-object limits trim the oldest. These tools are combined because each one feeds the next: the sessions define the ranges, the completed ranges produce the levels, the level lifecycle runs on the session clock and the ORB open, the pre-open dotted ranges share the same derived timings, and the holiday markers explain the days when the rest of the framework is dark. Changing one session input moves everything that depends on it, consistently.

Chỉ báo

của GodPlays888

Key Levels By Spartan - Compression Safe Key Levels Suite - Compression Safe A confluence-level indicator that won't compress your chart. It plots HTF opens/highs/lows, day levels, moving averages, and volume profile POC/VA, but only draws what's close enough to price to matter, so distant levels never stretch the y-axis and squash your recent candles. How it avoids compression: every level is checked against its distance from price before drawing. Close levels get a solid line and a full label with price and percent distance. Levels a bit further out still get a dashed line with just a name tag, faded down. Anything beyond that isn't drawn at all — it literally cannot affect auto-scale. Both distance thresholds are adjustable. Overlapping levels: when two levels land on the same price (say a daily high and a weekly high coincide), most scripts either stack duplicate labels or hide one. This script merges them into a single label listing every contributing name with the price shown once, while each source keeps its own line and color. Modules (each toggled independently): HTF levels — daily through yearly, open/high/low/mid, current and previous period Three configurable moving averages (EMA, SMA, WMA, HMA) Volume profile POC/VAH/VAL for your chosen timeframe, current and previous period Day levels — open/high/low/mid, previous day at reduced opacity HTF and previous-period values are non-repainting: current period updates live, previous period is locked from its final confirmed close. Settings cover line width, label size, extension length, what shows in labels, same-price merge tolerance, and which modules are active.

Chỉ báo

của SpartanH47

Auto Fibs Here's a clean, simple auto fibonacci indicator — it pulls the prior period's high/low (day, week, or month, depending on your chart), auto-detects which timeframe makes sense, and redraws fresh levels every time a new period starts. It also orients the fib automatically based on whether that prior period closed bullish or bearish, so the 0%/100% anchors make sense either way. How it works: Auto timeframe logic: charts on the 15min and below get Daily fibs, higher intraday charts get Weekly fibs, Daily+ charts get Monthly fibs. You can override this with the "Fib Period" dropdown. No repaint: it pulls the prior completed period's high/low/open/close via request.security with a offset — the levels won't shift once drawn. Auto-orientation: if the prior period closed bullish, 0% anchors to the low and 100% to the high (retracement from the low up). If bearish, it flips. Golden zone shading between 61.8%–78.6% is a nice visual reference for common reaction zones. Labels stay pinned to the current bar on the right edge so you can always read the levels without scrolling. Alerts for every fib level (including the extensions). To actually receive these, right-click the chart → Add Alert, set condition to this indicator, and choose "Any alert() function call" as the trigger — that way one alert setup covers all levels, and the message will tell you exactly which level got crossed. When the "Fib Period" dropdown is set to Auto, the script picks which fib to show based on how zoomed-in your chart is. 1 minute, 5 minute, or 15 minute chart → it shows the Daily fib (yesterday's high/low) Anything zoomed out further than 15 minutes — including a 1 hour, 4 hour, etc. — → it shows the Weekly fib (last week's high/low) Daily chart or higher (weekly, monthly) → it shows the Monthly fib (last month's high/low)

Chỉ báo

của stonkstradamus

FxNeel Institutional Swing & FVG Matrix Developed under the FxNeel, this open-source Pine Script v6 indicator is designed for professional traders utilizing advanced market structure frameworks and institutional volume tracking. The script focuses on identifying clear structural key points while maintaining chart cleanliness through intelligent filtering. Key Features: Four-Way Independent Swing Structure: It dynamically tracks Short-Term Highs (STH), Short-Term Lows (STL), Intermediate-Term Highs (ITH), and Intermediate-Term Lows (ITL). Automatic Overlap Filter: To ensure chart clarity and prevent clutter, the indicator automatically removes minor STH/STL lines and labels once a major institutional pivot (ITH/ITL) is fully confirmed. Dynamic Fair Value Gap (FVG) Engine: It tracks dynamic market imbalances (Bullish/Bearish FVGs) with real-time, state-based mitigation logic, modifying or removing zones as price action tests the gaps. Granular UI Customization: Features a fully structured settings panel where visibility, line styles, text colors, and exact 4-way label alignments (Vertical and Horizontal) can be customized independently for each swing type.

Chỉ báo

S/R + Zones + Gaps + Alerts v4 All-in-one TrendSpider-style chart analysis indicator for day traders. Features: - Auto pivot Support/Resistance levels with smart clustering - Higher timeframe S/R (Daily + Weekly levels on intraday) - Double Inside Day (DID) pattern detection with breakout alerts - Supply/Demand zones with auto-invalidation - Fair Value Gaps (FVGs) - Auto trendlines (ascending + descending) - EMA 20 - Prior Day High/Low/Close levels - Pre-market High/Low levels - Proximity alerts for all key levels v4 Changes: - Added Double Inside Day (DID) detector with box visualization - Single Inside Day (ID) labels - Triple Inside Day (TID) detection - DID breakout up/down arrows and alerts - Reduced pivot sensitivity for cleaner levels

Chỉ báo

của Kazekage212

TRADERXMOM 200EMA + VWAP What it does Plots trend-continuation signals on the 5-minute chart using VWAP and dual-timeframe 200 EMA confluence. "Signal Up"/"Signal Down" markers indicate a wick tap into a key level followed by a confirmed close back on the trend side — with built-in alert conditions for both directions. How it works Trend bias requires price to be above (or below) both session VWAP and a 200 EMA calculated from a 5-minute anchor timeframe. A separate 200 EMA calculated from a 1-minute anchor is tracked independently and used only as an additional tap level — it doesn't factor into trend bias, since testing showed treating it as a "level to react to" rather than a "level that defines trend" produced cleaner signal timing. A signal fires when price wicks through VWAP, the 1m 200 EMA, or the 5m 200 EMA, and the candle closes back on the trend side — a confirmed reclaim rather than a simple touch. This filters out level-touches that don't actually hold. Both 200 EMAs are calculated via request.security() with lookahead=barmerge.lookahead_off, so plotted values are non-repainting. How to use it Built for micro index futures (MNQ, MES) on the 5-minute chart. Optionally restrict signals to a single custom session window. Signal markers indicate confluence worth evaluating, not automatic trade entries — always apply your own risk management, and use the built-in alerts to monitor in real time rather than watching the chart continuously.

Chỉ báo

của tradermom7