Bắt đầu

Biến động

NeuPortal - Forecast: sealed distributions, not pathsDraws a forecast as a DISTRIBUTION at a stated horizon, never as a path. What it plots, from values you enter yourself: — median for the horizon — core 50% zone (25th–75th percentile of the asset's own historical moves over the same horizon) — wide 80% band (10th–90th percentile) — the seal: a vertical line at the bar the forecast was fixed on, so left of it is observed and right of it was unknown — an explicit invalidation level — a computed daily read (ADX, DI, RSI, MACD, %B, EMA structure, ATR) taken from the chart itself, so the table cannot drift from the price it sits on There is deliberately no diagonal anywhere. A line drawn from today's price to a future price is read as a claimed route, and a distribution at a horizon is not a route. The size of the expected move is stated as a vertical dimension bracket instead. Free, open source, no gating, no signals, no DMs. Educational content — not financial advice.
Chỉ báo
của neuportal_ai
ATR Chandelier StopTrade Control Adaptive ATR Chandelier Stop The Trade Control Adaptive ATR Chandelier Stop is a volatility based trailing stop designed for swing and position traders who want a more objective way to manage exits and protect gains. Instead of applying the same fixed percentage stop to every stock, the indicator uses Average True Range, or ATR, to account for how much each symbol typically moves. More volatile stocks receive wider stop levels, while lower volatility stocks receive tighter stop levels. How it works For long positions, the trailing stop is calculated as: Highest high over the selected lookback period minus ATR multiplied by the selected multiplier With the default settings, the calculation is: 22 bar highest high minus 3 times the 14 bar ATR This creates a stop that hangs below the stock’s recent high, which is why it is called a Chandelier stop. As the stock makes new highs, the stop can move higher. During normal pullbacks, the stop generally does not move lower while the bullish trend remains intact. When price closes below the trailing stop, the indicator changes to a bearish state and begins plotting the corresponding stop above price. Default settings ATR Length: 14 Price Lookback: 22 ATR Multiplier: 3.0 Automatic Volatility Adjustment: Off by default These settings are intended as a balanced starting point for swing and position traders using the daily chart and holding trades for several weeks to several months. Adaptive volatility option The optional adaptive setting adjusts the ATR multiplier based on ATR as a percentage of the stock price. When enabled, the indicator gives highly volatile stocks additional room and may tighten the stop for lower volatility stocks. The standard 3 ATR setting remains the default for traders who prefer a simpler and more consistent approach. Best uses The indicator is designed for: • Swing trading • Position trading • Trend following • Managing profitable trades • Reducing emotional exit decisions • Monitoring individual stocks or watchlists It is generally most useful on the daily timeframe. Alert condition The script includes an alert condition for a confirmed daily close below the trailing stop. Recommended TradingView alert settings: Condition: Daily Close Below ATR Stop Interval: 1D Trigger: Once per bar close The alert is designed to trigger when the trend first changes from bullish to bearish. It does not repeatedly alert every day while price remains below the stop. Important considerations The Trade Control Adaptive ATR Chandelier Stop is a trade management tool, not a complete trading strategy. Traders should also consider technical support and resistance, entry price, position size, maximum acceptable loss, earnings risk, gap risk, and overall market conditions. A stock can gap below the plotted stop, particularly around earnings or major news. The indicator does not guarantee execution at the displayed price.
Chỉ báo
của TradeControlHQ
GLEER Smart Dashboard// DESCRIPTION // // GLEER Smart Dashboard is a professional multi-indicator trend analysis // system designed to provide traders with a complete market overview // from a single indicator. // // The script combines several technical analysis tools into one unified // dashboard and generates high-quality trading signals based on the // agreement between multiple indicators. // // INCLUDED MODULES // • Up to 8 customizable Moving Averages // • EMA / SMA / WMA / VWMA / RMA / HMA support // • ADX & DMI Trend Engine // • RSI Momentum Engine // • SuperTrend Pro Engine // • Volume Analysis Engine // • Smart Dashboard // • Trend Score Engine // • Multi-condition Alert System // // MAIN FEATURES // • Fully customizable moving averages // • Trend strength detection // • Bullish/Bearish market analysis // • SuperTrend trend confirmation // • RSI momentum confirmation // • Volume strength analysis // • Overall Trend Score (0-100) // • Market Bias calculation // • Final Buy/Sell decision engine // • Real-time dashboard // • TradingView alert support // // DASHBOARD DISPLAYS // • MA Trend // • ADX Strength // • DMI Signal // • RSI Status // • SuperTrend Direction // • Volume Strength // • Trend Score // • Market Bias // • Final Signal // // ALERTS // • Strong Buy // • Buy // • Sell // • Strong Sell // • DMI Cross // • Golden Cross // • Death Cross // • RSI Signals // • SuperTrend Signals // • Volume Spike // // This indicator is intended for educational and analytical purposes. // It should not be considered financial advice. Always confirm signals // using proper risk management and your own market analysis. //======================================================================
Chỉ báo
của GLRSMEER
NeuPortal - Forecast LevelsDraws a pre-computed probabilistic price forecast on the chart: a core-50% / 80% cone projected forward, the median path, an entry zone, an invalidation level, two reference levels, Fibonacci retracements, support/resistance and three EMAs. This is a RENDERER, not a signal generator. You paste the numbers — produced by your own model or by hand — into the settings, and the script draws them consistently. Nothing is computed from price except the moving averages. Why it is built this way: a forecast written down with an explicit invalidation and a stated probability band can be scored afterwards. A drawing without those cannot. Inputs are grouped: 1) Forecast — central (median), core 50% band, wide 80% band, projection length 2) Position — bias (long / short / neutral), entry zone, invalidation, two reference levels 3) Structure — support, resistance, five Fibonacci retracements 4) Moving averages — three EMAs, bundled in to save an indicator slot Educational content — not financial advice.
Chỉ báo
của neuportal_ai
Risk & Position Sizing CalculatorLEGAL DISCLAIMER — READ FIRST **This script and this description are for EDUCATIONAL PURPOSES ONLY.** - This is **not** investment advice, a trading recommendation, or a solicitation to buy or sell any stock, index, or F&O (Futures & Options) contract. - Nothing in this script or description constitutes a recommendation to trade Nifty, Bank Nifty, or any stock, in cash, futures, or options. - The script does **not** predict market direction and does **not** guarantee profit. Past performance of any rule-set (including the EMA-crossover logic used here) does not guarantee future results. - Trading in equities, futures, and options carries a **high risk of loss**, including the possible loss of your entire invested capital, and is not suitable for everyone. - All entries, exits, position sizes, and trading decisions remain **solely your own responsibility**. - Please independently verify all information and **consult a SEBI-registered Investment Adviser** before making any trading or investment decision. - The creator of this script accepts **no liability** for any financial loss arising from its use. By using this script, you acknowledge that you understand and accept the above. --- 1. What This Script Is A **risk and position-sizing calculator** for TradingView, with an **optional mechanical signal add-on**. It does two separate jobs: 1. **Risk Calculator (always on):** tells you how many lots you could safely trade on any chart (Nifty, Bank Nifty, or a stock), given your capital and risk tolerance — the math, not a prediction. 2. **Signal Add-on (optional, toggle on/off):** plots a Buy marker based on one fixed technical rule (EMA crossover, optionally RSI-filtered), then tracks that trade and marks profit-booking levels (T1/T2/T3) and stop-loss on the chart, with alerts. 3 hours ago Release Notes ns on top of any chart (Nifty, Bank Nifty, or a stock) and answers: "If I enter here, how many lots can I safely trade given my capital and risk tolerance?" 1. Inputs (4 setting groups) Capital & Risk — your capital, risk % per trade, and Caution/High-Risk thresholds that color-code the dashboard. Stop-Loss Method — ATR-based (volatility-derived) or Swing High/Low (distance to recent swing point). Contract Details — lot size (65 for Nifty by default, editable) and direction (Long/Short). Targets — T1/T2/T3 as multiples of your risk (1R, 2R, 3R), mirroring the T1/T2/T3 in your original screenshot. 2. Calculations Uses current close as "entry." Computes stop-loss distance via ta.atr() × multiplier, or highest/lowest price over your lookback. Derives stop-loss price and the three target prices as R-multiples from entry. Computes risk amount (capital × risk%), risk per lot (SL distance × lot size), and max safe lots (risk amount ÷ risk per lot) — the same math behind "Safe Lots" in your dashboard tool. Flags a zone: SAFE / CAUTION / HIGH RISK based on your risk % vs. the thresholds. 3. Visuals Dashed/dotted lines on the chart for entry, stop-loss, and the three targets. A dashboard table (top-right corner) showing all the numbers, updated on the latest bar. What it doesn't do: pull option-chain data (strike, premium, decay) — not accessible
Chỉ báo
của dewanpro
FULCRUM: Rates & Vol Adjusted Ratio VWAPWHAT IT DOES The fulcrum of the index complex: a rates-and-volatility-adjusted VWAP for the relationship between two markets. It rebuilds the NQ/ES ratio bar by bar — 2500·NQ/ES, normalized by VXN×US10Y — then anchors a volume-weighted mean with ±1σ and ±2σ bands on that relative-value series. One line that says whether tech is rich or cheap against the broad market, and how stretched the move is. It lives in its own pane, works on any chart, and configures itself. HOW IT WORKS Both legs are requested at chart resolution, and the bar's ratio high/low come from the cross-extremes (NQ high over ES low, and the reverse) — the VWAP sees the bar's true range, not just closes. A spread has no volume of its own, so weighting borrows the geometric mean of both legs' volume. The rates/vol divisor uses the PRIOR session's confirmed VXN and US10Y closes — identical live and on reload. No repaint. The anchor is automatic: session on charts up to 20m, week up to 4h, month above. Override it if you disagree. Bands come from cumulative volume-weighted variance, not a rolling stdev, and stay hidden for the first bars after each reset while they cook. The ratio line holds its color until the move clears ±0.15σ — color changes are regime, not noise. A faint tint marks ±2σ extension. A live table reads VWAP, ratio, Δ%, σ-distance, zone, and the divisor's status — if a feed is missing it says so instead of guessing silently. HOW TO USE IT Read the relationship against its anchored mean: +2σ on a ratio behaves like +2σ on price — stretched, and usually walked back. Cross alerts on VWAP, ±1σ, and ±2σ are included. Swap the symbols and multiplier and it generalizes to any pair you trade. WHAT IT CAN'T DO It describes the relationship, not direction — the ratio falling doesn't say whether NQ is weak or ES is strong. If the VXN or US10Y feed is unavailable, the divisor falls back to sane defaults and the table flags it; it will not pretend. SETTINGS Numerator, denominator, and multiplier; VXN×US10Y normalization; auto or manual anchor (session, week, month); band multipliers; warm-up hiding; colors, fill, labels, table. Open source. Free. Where the balance sits.
Chỉ báo
của QuantitativeQ
Intraday Liquidity Sessions [dpTrades]Intraday Liquidity Sessions WHAT IT IS An intraday view of session liquidity. It draws the New York, London and Tokyo sessions, and adds an analytics layer that plain session tools do not have: it marks when a session runs the liquidity left by its own previous instance, and reports whether each session is expanding or compressing relative to its own recent behaviour. "Liquidity" here means the session highs and lows that resting orders sit against, not a volume heatmap. WHY THESE COMPONENTS BELONG TOGETHER Session boxes on their own only tell you when a session happened. The information a trader actually needs is what that session is doing relative to what the same session normally does, and whether it has taken out the level the previous one left behind. Those two readings are only meaningful in the context of the session they belong to, which is why the drawing layer and the analytics layer are one script rather than two: the ranges, the averages and the sweep detection are all computed from the same per-session state. METHOD Each session is tracked independently, with its own state: - Range tracking: while a session is open, the script keeps its running high and low, and the price at which the session opened. - Previous-instance memory: when a session closes, its high and low are stored as the reference for the next instance of that same session. - Rolling average: the range of each completed session is folded into a rolling average over a configurable number of past instances (default 20). The current session's range against that average is what classifies it as expanding or compressing. The comparison is always a session against itself, never against another, since Tokyo and New York are not comparable in size. - Directional bias: measured as the current close against the session's own opening price. - Liquidity sweep: while a session is open, price is checked against the high and the low left by the previous instance of that same session. When it trades through one of them, the event is marked on the chart and flagged in the table. Session hours are timezone-aware, so the windows stay correct regardless of the exchange timezone of the charted symbol. HOW TO USE IT Read the table first. A session opening expanded versus its own average usually means participation is above normal; a compressed one often precedes a range. The bias column shows which way that session has leaned since its open. The sweep marker tells you the previous session's liquidity has already been taken, which is context rather than a signal. Sessions, hours, colours and drawing style are configurable. The default set is New York, London and Tokyo in New York time, each shown in its own colour so they are easy to tell apart. LIMITATIONS - Intraday timeframes only. On daily and above there are no session windows to resolve. - While a session is still open its range, bias and stats update in real time as price moves. They are final only once the session closes. - The rolling average needs several completed sessions before expanding or compressing means anything. Early in the chart history it will be unreliable. - A liquidity sweep describes what already happened, not a prediction. It marks that a level was taken, nothing more. - This is a context tool. It produces no entries, no exits and no buy or sell signals. Educational content only. Not financial advice. Trade at your own risk.
Chỉ báo
của dptradees
SVKO InfoSVKO Info displays key market information for a chart symbol and its mapped native counterpart in one compact table. It lets users follow an underlying TradingView listing from a broker CFD chart without leaving the chart. █  OVERVIEW The table can show company and symbol identity, multi-period performance, extended-hours movement, a configurable history high, daily ATR, earnings, analyst target, and P/E data. Each optional feature controls its related data request. Native TradingView charts can display their own metrics without a mapping. A broker chart remains silent when no native counterpart can be resolved. On supported broker charts, the optional mapped price marker places the mapped symbol's latest available extended-session price beside the CFD candles for direct comparison. █  SYMBOL RESOLUTION SVKO Info first checks its own Mappings input. Local mappings have priority and work without a companion indicator. When the local list has no match, the indicator can use SVKO CFD Symbol Mapper as a fallback. Connect 1st code to Map: 1st code and 2nd code to Map: 2nd code from the same Mapper instance. Broker charts use the resolved native symbol for calculations. Native TradingView charts use their own standard ticker and can show an available inverse-mapped CFD counterpart. █  HOW TO USE  • Add SVKO Info to the chart.  • Add complete source and target ticker pairs to Mappings for symbols that need a local mapping.  • Add SVKO CFD Symbol Mapper when the shared fallback table is required, then connect both code inputs to the same Mapper instance.  • Enable only the table rows and mapped-price drawing that you need.  • Adjust the history window before requesting long performance periods.  • Use the table and mapped-price styling controls to fit the chart layout. █  PERFORMANCE AND MARKET DATA Performance uses regular-session daily prices and supports rolling periods, calendar-based periods, and custom start dates. Periods outside the selected history window are omitted. Extended-hours data compares the active premarket or postmarket price with the most recent regular-session close. Daily ATR always uses daily data, regardless of the chart timeframe. Earnings, analyst targets, valuation data, company metadata, and mapped quotes depend on TradingView coverage and the user's data permissions. █  ALERTS Days to Earnings is a hidden numeric plot for manually configured Crossing alerts. The script does not create an alert by itself. █  LIMITATIONS Performance excludes dividends, currency conversion, position sizing, fees, and extended-hours movement. Live values refresh only when the chart receives an update, and current-bar values can change before the bar closes. The extended-hours row and mapped price marker are current-display tools, not historical signals or backtest series. A mapped quote cannot refresh independently when the chart symbol stops producing updates. Unavailable data appears as N/A where applicable. If a broker symbol cannot be resolved through either mapping method, the indicator draws nothing and skips its mapped data requests. █  CREDITS AND LICENCE Original work by SVKO. Published open source under the Mozilla Public License 2.0.
Chỉ báo
của cvladan
DNSE VN301!, Donchian Break Out Strategy"Donchian Channel Breakout with SMA Trend Filter" is a trend-following breakout strategy designed to capture sustained price movements while filtering out low-probability signals. The Donchian Channel identifies breakouts by tracking the highest high and lowest low over a specified lookback period, generating potential entry signals when price closes outside the recent trading range. Because breakouts during sideways or low-volatility markets often fail, the strategy incorporates a Simple Moving Average (SMA) as a trend filter. Long signals are prioritized when the SMA is rising, while Short signals are prioritized when the SMA is falling, ensuring trades align with the prevailing market trend. By combining breakout detection with trend confirmation, the strategy aims to reduce false breakouts and improve overall signal quality. *By default: each VN Futures contract requires VND 30,000,000 of initial margin. The strategy assumes an initial capital of VND 100,000,000, resulting in a fixed position size of 3 contracts for each trading signal. To better reflect real-market trading conditions, the backtest incorporates a commission of VND 10,000 per contract and a minimum slippage assumption of 3 ticks on every executed trade. Settings & Strategy Configuration: Chart: recommended 15-minute timeframe Donchian Channel Period: 20 SMA Period: 200 Stop Loss: 10 points Take Profit: 20 points SMA Trend Filter: On / Off Use Take Profit: On / Off Time Filter: On / Off Trading Session: 09:00 – 14:30 Trade Direction: Long / Short / Both Default Script Settings: The strategy calculates the upper and lower bands of the Donchian Channel using the selected lookback period. A breakout above the upper band may indicate buying pressure, while a breakout below the lower band may indicate selling pressure. When the SMA(200) trend filter is enabled, the script only allows Long entries when SMA(200) is rising and only allows Short entries when SMA(200) is falling. When the SMA filter is disabled, the strategy can trade both directions based only on Donchian Channel breakout signals. Entry & Exit Conditions: Entry Long: Close Price > Upper Donchian Channel AND SMA(200) is rising, if the SMA filter is enabled AND the signal appears within the selected trading session AND Long trading is allowed by the trade direction setting Exit Long: Stop Loss: 10 points from entry price Take Profit: 20 points from entry price, if enabled Opposite Donchian breakout signal Position reversal when a valid Short signal appears Automatic close at the end of the trading session Entry Short: Close Price < Lower Donchian Channel AND SMA(200) is falling, if the SMA filter is enabled AND the signal appears within the selected trading session AND Short trading is allowed by the trade direction setting Exit Short: Stop Loss: 10 points from entry price Take Profit: 20 points from entry price, if enabled Opposite Donchian breakout signal Position reversal when a valid Long signal appears Automatic close at the end of the trading session Disclaimers: Trading futures contracts carries a high degree of risk, and price movements can be highly volatile. This script is intended as a reference and research tool only. It should be used by individuals who understand futures trading, have assessed their own risk tolerance, and are knowledgeable about the strategy’s logic. All investment decisions are the sole responsibility of the user. DNSE bears no liability for any potential losses incurred from applying this strategy in real trading. Past performance does not guarantee future results. ______________________________________________________________________ "Chiến lược Breakout Donchian Channel kết hợp bộ lọc xu hướng SMA" là một chiến lược giao dịch theo xu hướng, được thiết kế nhằm tận dụng các đợt bứt phá giá mạnh đồng thời giảm thiểu các tín hiệu nhiễu. Donchian Channel xác định các điểm breakout bằng cách theo dõi mức giá cao nhất và thấp nhất trong một khoảng thời gian xác định, từ đó tạo tín hiệu khi giá đóng cửa vượt ra khỏi vùng dao động gần nhất. Do các tín hiệu breakout trong giai đoạn thị trường đi ngang hoặc biến động thấp thường có xác suất thất bại cao, chiến lược sử dụng thêm đường trung bình động đơn giản (SMA) làm bộ lọc xu hướng. Khi đường SMA đang dốc lên, chiến lược ưu tiên các tín hiệu Long; ngược lại, khi SMA dốc xuống, chiến lược ưu tiên các tín hiệu Short, giúp các lệnh giao dịch đi cùng xu hướng chính của thị trường. Bằng cách kết hợp tín hiệu breakout với xác nhận xu hướng, chiến lược hướng tới việc giảm các tín hiệu phá vỡ giả và nâng cao chất lượng giao dịch. *Theo mặc định, mỗi hợp đồng VN Futures yêu cầu ký quỹ ban đầu là 30.000.000 VNĐ. Chiến lược giả định vốn ban đầu là 100.000.000 VNĐ, tương ứng với quy mô vị thế cố định là 3 hợp đồng cho mỗi tín hiệu giao dịch được tạo ra. Để phản ánh sát hơn điều kiện giao dịch thực tế, kết quả kiểm định (backtest) được giả định với phí giao dịch là 10.000 VNĐ cho mỗi hợp đồng và độ trượt giá (slippage) tối thiểu là 3 bước giá (ticks) đối với mỗi lệnh được khớp. Cài đặt & cấu hình chiến lược: Biểu đồ: khuyến nghị khung 15 phút Chu kỳ Donchian Channel: 20 Chu kỳ SMA: 200 Cắt lỗ: 10 điểm Chốt lời: 20 điểm Bộ lọc xu hướng SMA: Bật / Tắt Dùng chốt lời: Bật / Tắt Bộ lọc giờ: Bật / Tắt Khung giờ giao dịch: 09:00 – 14:30 Chiều giao dịch: Mua / Bán / Cả hai Cài đặt mặc định của script: Chiến lược tính toán biên trên và biên dưới của Donchian Channel dựa trên chu kỳ được chọn. Khi giá phá lên biên trên, lực mua có thể đang chiếm ưu thế. Khi giá phá xuống biên dưới, lực bán có thể đang chiếm ưu thế. Khi bật bộ lọc xu hướng SMA(200), script chỉ cho phép lệnh Mua khi SMA(200) dốc lên và chỉ cho phép lệnh Bán khi SMA(200) dốc xuống. Khi tắt bộ lọc SMA, chiến lược có thể giao dịch cả hai chiều chỉ dựa trên tín hiệu breakout của Donchian Channel. Điều kiện vào và thoát lệnh: Vào lệnh Mua: Giá đóng cửa > Biên trên Donchian Channel VÀ SMA(200) dốc lên, nếu bật bộ lọc SMA VÀ tín hiệu xuất hiện trong khung giờ giao dịch VÀ chiều giao dịch cho phép lệnh Mua Thoát lệnh Mua: Cắt lỗ: 10 điểm từ giá vào lệnh Chốt lời: 20 điểm từ giá vào lệnh, nếu bật Có tín hiệu breakout ngược chiều Đảo chiều khi xuất hiện tín hiệu Bán hợp lệ Tự động đóng lệnh khi hết khung giờ giao dịch Vào lệnh Bán: Giá đóng cửa < Biên dưới Donchian Channel VÀ SMA(200) dốc xuống, nếu bật bộ lọc SMA VÀ tín hiệu xuất hiện trong khung giờ giao dịch VÀ chiều giao dịch cho phép lệnh Bán Thoát lệnh Bán: Cắt lỗ: 10 điểm từ giá vào lệnh Chốt lời: 20 điểm từ giá vào lệnh, nếu bật Có tín hiệu breakout ngược chiều Đảo chiều khi xuất hiện tín hiệu Mua hợp lệ Tự động đóng lệnh khi hết khung giờ giao dịch Tuyên bố rủi ro: Giao dịch hợp đồng tương lai có mức độ rủi ro cao và giá có thể biến động mạnh. Script này chỉ phục vụ mục đích tham khảo, nghiên cứu và kiểm thử. Người dùng cần hiểu rõ giao dịch phái sinh, khẩu vị rủi ro cá nhân và logic của chiến lược trước khi áp dụng vào giao dịch thực tế. Mọi quyết định đầu tư thuộc trách nhiệm của người dùng. DNSE không chịu trách nhiệm cho bất kỳ khoản lỗ nào phát sinh từ việc sử dụng chiến lược này trong giao dịch thực tế. Hiệu quả trong quá khứ không đảm bảo kết quả trong tương lai.
Chiến lược
của DNSE
MTF Trend Context MTF Trend Context is a decision-support panel that answers one question before you trade: does the current context allow a trade at all? It does not generate entry signals — it tells you when trend alignment, trend strength, distance from value, volatility and time of day justify looking for one, and tells you to stand aside the rest of the time. WHAT IT DOES It reads the trend on your chart timeframe plus two higher timeframes and condenses everything into a single verdict at the bottom of the panel: 🟢 LONGS ONLY — all three timeframes aligned up and the market is trending 🔴 SHORTS ONLY — all three timeframes aligned down and the market is trending 🟡 STRETCHED — WAIT PULLBACK — aligned, but price is too far from VWAP to chase 🟡 CONFLICT — WAIT — timeframes disagree ⛔ RANGE — NO TRADE — ADX below threshold ⛔ OFF HOURS — NO TRADE — outside your personal trading window (optional filter) HOW IT WORKS Trend score per timeframe: three conditions worth ±1 each — price vs fast EMA (20), fast EMA vs slow EMA (50), and price vs session VWAP. A full score on the chart timeframe plus agreement on both higher timeframes is required for alignment. Higher timeframes are picked automatically (5m → 15m + 1h, 15m → 1h + 4h, etc.) or set manually. On daily and higher timeframes the VWAP component is excluded automatically and the maximum score adjusts accordingly. Range filter: when ADX on the chart timeframe is below the threshold (default 20) the verdict is forced to RANGE regardless of alignment. Trend strength is shown as a 5-block bar (ADX 10 → empty, ADX 40 → full). Stretched price (anti-FOMO): the session VWAP is anchored to the daily session open (on CME futures, the 18:00 ET Globex open) with ±1σ and ±2σ bands. Beyond 2σ the price is considered stretched and the verdict switches to WAIT PULLBACK. Volatility with a time-of-day baseline: the current ATR is compared against its own average at the same time of day over the last N sessions (default 10), not against a flat rolling average. Intraday volatility is strongly seasonal — a flat average would make quiet sessions such as Asia read "low" permanently. 100% = normal for this time of day. It needs roughly N sessions of chart history to fill in. Daily levels: previous day high, low, close and the current session open, drawn only for the current session with optional name labels. The panel shows the nearest level, its distance and direction, and warns when a level sits in the way of a trade. Trend age: bars since the current alignment started, classified as young / mature / late, so you know whether you are early or chasing. Trading-hours filter (optional): define your own window and timezone; outside it the verdict is NO TRADE and all alerts are muted. Session row: shows whether Asia, London or New York is active. NON-REPAINTING Higher-timeframe readings use the last CONFIRMED higher-timeframe bar (request.security with a offset and lookahead), so the values shown on historical bars are exactly what you would have seen live. The cost is one higher-timeframe bar of lag; the benefit is an honest history. ALERTS Three alert conditions — traffic light GREEN (longs), traffic light RED (shorts), and entering RANGE — plus matching alert() events, so a single alert with "Any alert() function call" covers everything. Recommended trigger: "Once per bar close". SETTINGS Every chart element (EMAs, EMA cloud, VWAP line and bands, stretched-zone fill, level lines and labels) has its own visibility toggle, color and width. Panel rows can be hidden one by one; panel position and text size are configurable. NOTES AND LIMITATIONS Designed with CME index futures on intraday charts in mind; works on any symbol, but on 24/7 markets the "day" follows the exchange's daily bar. Defaults are tuned for 5-minute charts. On quiet sessions consider lowering the ADX threshold to 17–18. This is a context filter, not a strategy. It does not tell you where to enter or exit, and a green or red verdict is not a prediction about any individual trade.
Chỉ báo
của jesusreynacruz
Sphinx Key Levels DOL Graded Supply & DemandA draw-on-liquidity (DOL) map that plots the reference levels price is drawn toward, then builds supply and demand zones ONLY at those levels using an ICT-style delivery sequence. The aim is confluence by construction: rather than printing supply/demand everywhere, a zone can only exist where a tracked liquidity level was actually raided. What it plots Liquidity levels (each toggleable): prior day, week and month highs/lows; prior Asia and London session highs/lows; and the overnight high/low. Nearby levels are merged into a single graded band so the chart stays readable, and untested ("naked") levels are weighted up, since unswept liquidity tends to act as a stronger magnet. Equilibrium references, kept separate from liquidity: midnight, 08:30 and 09:30 opens, plus optional weekly and monthly opens. A compact table reads price as premium or discount against each open. Opening gaps: NDOG (new day) and NWOG (new week), drawn at their true range with a consequent-encroachment midline. How the zones are built For each enabled level, the script runs a four-step sequence: Sweep - price trades through the level, raiding the short-term liquidity resting beyond it. Reclaim - price closes back on the origin side within a set window, rejecting the raid. Order block - the last opposite-close candle into the swept extreme is marked as the zone, optionally extended to the swept wick so a protective stop can sit beyond the raided liquidity. Displacement - a fair value gap must form in the move away from the level to validate the zone. No FVG within the window, no zone. This step can be turned off to draw on the order block alone. A high-type level that is swept and reclaimed produces a supply zone; a low-type level produces a demand zone. Only enabled level types generate zones, so selecting, for example, only prior day high/low restricts zones to those two levels. Each level holds one live zone at a time. A zone is mitigated when price closes through its far side, and by default a zone expires when its underlying level rolls to a new session, so a zone only remains on the chart while a live level of that type stands behind it. Alerts Three conditions: a new zone forms, price enters an active zone, and a zone is mitigated. Notes Higher-timeframe values use confirmed prior-period data and do not repaint after a bar closes. Zone detection runs on the live bar by default, so a forming zone can update until that bar closes and is fixed on close; an option is included to confirm zones only on closed bars for users who prefer no intrabar movement. Session times are New York based. Built for intraday index futures on sub-hourly charts; other symbols and timeframes will need the sweep and displacement windows retuned. This is an analysis and context tool. It does not place orders and makes no performance claims.
Chỉ báo
của TheHermeticTrader
FX Session HighlighterThis indicator highlights the Tokyo, London and New York trading sessions on intraday charts, so you can see at a glance which market is active and how price behaves inside each session. How it works Each session is defined by a time range interpreted in its own local timezone (Asia/Tokyo, Europe/London, America/New_York). Because the timezone is attached to each session, daylight-saving shifts are handled automatically — you do not need to adjust the times twice a year. Features Background highlight per session (colors and time ranges are fully configurable, each session can be toggled individually) Optional session high/low tracking, drawn as lines while the session is active Alert conditions for the open of each session Notes and limitations The indicator works on intraday timeframes only; on daily and higher timeframes nothing is drawn. Default time ranges reflect commonly used market hours, but "session" definitions vary between traders — adjust the ranges to match your own approach. This is a visualization tool and implies nothing about future price movement.
Chỉ báo
của DIVISION_ZERO
Liquidity Sweeps & Key Levels [AlgoForex] What this indicator does This tool plots the market's most commonly targeted liquidity levels and detects when they are swept: Previous Day High / Low (PDH / PDL) and Previous Week High / Low (PWH / PWL) — price levels where clusters of stop orders typically rest. Liquidity sweep detection — a sweep is marked when price trades through one of these levels but closes back on the other side of it, the classic footprint of a stop-hunt / liquidity grab. Signals are evaluated only on confirmed bar close, so they do not repaint. Session range box — highlights the high/low range of a user-defined session (default 00:00–08:00 UTC), useful for studying how later sessions interact with that liquidity. Each level can only produce one sweep signal per day/week, keeping the chart clean. How it works Previous day/week levels are requested from the completed higher-timeframe candle (high / low ), which is the standard non-repainting method. A sweep of a high requires high > level and close < level on the same confirmed bar (mirrored for lows). The session box is built bar-by-bar while the session is active. How to use it Works on any symbol. Sweeps of PDH/PDL are most informative on intraday timeframes (M5–H1). A sweep is not a trade signal by itself — it identifies where liquidity was taken so you can study the reaction that follows. Alerts are included for all four sweep types. Settings Toggle each level group, sweep detection per timeframe, colors, and the session window/timezone. This script is for educational purposes only and is not financial advice. ماذا يفعل هذا المؤشر يرسم المؤشر أهم مستويات السيولة التي يستهدفها السوق ويكشف لحظة "كنس" السيولة منها: قمة وقاع اليوم السابق (PDH / PDL) وقمة وقاع الأسبوع السابق (PWH / PWL) — مناطق تتجمع فيها أوامر وقف الخسارة عادة. كشف كنس السيولة — تُرسم الإشارة عندما يخترق السعر المستوى ثم يغلق عائداً خلفه، وهي البصمة الكلاسيكية لصيد الستوبات. تُقيَّم الإشارات فقط عند إغلاق الشمعة المؤكد فلا يعاد رسمها. صندوق نطاق الجلسة — يوضح قمة وقاع جلسة يحددها المستخدم لدراسة تفاعل الجلسات اللاحقة مع تلك السيولة. كل مستوى يعطي إشارة كنس واحدة فقط في اليوم/الأسبوع للحفاظ على نظافة الشارت. طريقة الاستخدام يعمل على جميع الأزواج والفريمات، والأفضل للفريمات الصغيرة (M5 حتى H1). إشارة الكنس ليست إشارة دخول بحد ذاتها، بل تحدد أين أُخذت السيولة لدراسة رد الفعل بعدها. تتوفر تنبيهات لجميع أنواع الكنس الأربعة. هذا المؤشر لأغراض تعليمية فقط وليس نصيحة مالية.
Chỉ báo
của AlgoSmart-Official
XAUUSD ICT + SMC Professional ToolkitADVANCED SMC TOOLKIT WITH BUY AND SELL CALL MARK MONEY MAGNET ZONE Indicator मध्ये: Order Blocks: Institutional buying/selling zones FVG: Price imbalance किंवा रिकामी liquidity area SSL Sweep: Sell-side liquidity sweep झाल्यानंतर reversal/bounce दाखवतो EMA 50 आणि EMA 200: Trend direction filter Red zones: संभाव्य Sell/Supply zones Green zones: संभाव्य Buy/Demand zones Purple/Grey zones: FVG आणि imbalance zones
Chỉ báo
của PV56BCP
Pymander's EZ Momentum Matrix**Pymander’s EZ Momentum Matrix** is a responsive momentum oscillator designed to help traders measure directional strength, identify potential momentum shifts, and confirm whether price is moving with or against the broader trend. The main oscillator compares fast and slow price movement, adjusts the result for current market volatility, and smooths the output into an easy-to-read wave. When the oscillator is rising, bullish momentum is strengthening. When it is falling, bearish momentum is gaining control. The indicator also includes a separate **Trend Matrix** that analyzes momentum, price position, and trend structure using a series of double-smoothed moving averages. This helps distinguish strong directional movement from weaker or neutral market conditions. Key features include: * Rising and falling momentum visualization * Overbought and oversold reference zones * Bullish and bearish extreme-turn signals * Trend Matrix showing bullish, bearish, or neutral conditions * Confluence signals when oscillator momentum aligns with the broader trend * Optional glow and gradient-fill effects * Adjustable sensitivity, speed, smoothing, and trend settings * Alerts for confluence and extreme momentum turns Diamond signals appear when momentum direction and the Trend Matrix become aligned. Circle signals identify potential turns from overbought or oversold conditions. What sets EZ Momentum Matrix apart from a traditional oscillator is that it does not rely on momentum alone. It combines momentum strength, momentum direction, trend confirmation, and price location into one clear visual tool. This can help traders confirm entries, avoid fighting strong trends, recognize weakening momentum, and better understand who currently has control of the market. As with any indicator, use EZ Momentum Matrix alongside proper risk management, market structure, and a tested trading plan. No indicator can guarantee profitable results. Best of luck with your trading. Stay patient, remain disciplined, and protect your capital. — **Pymander**
Chỉ báo
của PYMAND3R