Fund + Pullback Screener v5Fund + Pullback Screener — fundamental filter + pullback entry signal
WHAT IT DOES
This indicator combines fundamental screening and technical entry timing in a single tool. The logic is two-stage: a stock is first checked against fundamental criteria, then against a pullback setup (a retracement within an uptrend). All checks are displayed in an on-chart table: value, threshold, pass/fail.
PRESETS
5 built-in fundamental filter modes (switchable in settings):
- GARP — quality companies at a reasonable price: P/E 8–35, ROE > 15%, operating margin > 15%, EPS growth > 10%, Debt/Equity < 1, PEG < 2
- Growth — profitable companies with aggressive growth: P/E up to 120, EPS growth > 25%, revenue growth > 20%, PEG < 3
- Deep Value — cheap and profitable: P/E 5–18, PEG < 1.2, Debt/Equity < 0.7
- Emerging Growth — pre-profit hypergrowth (P/E, PEG, EPS, ROE are not used): revenue growth > 30%, revenue acceleration, gross margin > 40%, improving operating margin, Rule of 40, share dilution < 8%
- Custom — manual thresholds
SIGNAL LOGIC
Status in the table: NO / WATCH / ENTRY.
- Trend filter: weekly timeframe, price above SMA200 and SMA50 above SMA200. For young companies without 200 weeks of history, it automatically falls back to SMA50.
- WATCH: fundamentals passed, uptrend intact, RSI below 50, price within 4 ATR of support (pivot low or SMA50). A candidate to monitor.
- ENTRY: RSI in the 30–50 zone turning up, price within 1.5 ATR above support (an undercut down to 0.5 ATR is allowed). Shown as a triangle below the bar.
Distances are measured in ATR units, so the logic automatically adapts to each instrument's volatility.
HANDLING UNAVAILABLE DATA (N/A POLICY)
Some sectors structurally lack certain metrics (e.g., gross margin for insurers). Lenient mode (default) skips up to 2 unavailable metrics, marking them with a gray "–" and showing a skip counter. Core metrics (market cap, revenue growth) are never skipped. Strict mode: any unavailable metric = fail.
HOW TO USE
1. Recommended timeframe — daily.
2. Pick the preset matching the company type: mature names — GARP/Deep Value, expensive growers — Growth, pre-profit — Emerging Growth.
3. Shortlist candidates with the native TradingView screener, add them to a watchlist and flip through the charts — the table instantly shows the full picture for each ticker.
4. All thresholds are configurable in the settings.
LIMITATIONS
- Works on stocks only — crypto, forex and futures have no fundamental data.
- EPS and revenue growth are computed from the history of quarterly reports accumulated on the chart: full history is required (at least 8–9 quarters), otherwise growth metrics show n/a.
- Fundamental data updates quarterly as reports are released.
- The indicator is informational only and is not investment advice. אינדיקטור
אינדיקטור
Daily Key Levels + Weekly Year Opens v2.5 OPEN SOURCEDAILY KEY LEVELS + WEEKLY YEAR OPENS
A clean higher-timeframe map that automatically changes with the chart.
AUTOMATIC DAILY AND WEEKLY PROFILES
This indicator is built specifically for 1D and 1W charts . It detects the chart timeframe and switches profiles automatically.
On a 1D chart , it displays the important weekly and monthly levels, the daily moving averages, and the Daily Trend + Level Map.
When the chart is changed to 1W , the daily profile is removed and the indicator automatically switches to the yearly-open profile. No manual setting changes are required when moving between daily and weekly charts.
On other timeframes, a small notice appears instead of displaying the wrong profile.
DAILY CHART PROFILE
The daily chart includes Previous Month High and Low , Current Month High and Low , and Previous Week High and Low . It also plots the 20 EMA in white, 50 SMA in red, and 200 SMA in blue.
Previous week and previous month levels are confirmed after those periods close. Current month levels continue developing as the month trades.
The compact dashboard adds practical context without taking over the chart. It shows:
Trend , based on price location and the exact order of the 20 EMA, 50 SMA, and 200 SMA.
Momentum / Stretch , including the direction of the 20 EMA and 50 SMA and price's distance from the 20 EMA in ATR units.
ATR / Stop Distance , showing the current daily ATR plus 2x and 3x ATR reference distances. These are volatility measurements, not automatic stop recommendations.
Previous Week and Previous Month , showing whether price is above, below, or inside each completed range.
Nearest Above, Nearest Below, and Nearest Confluence , identifying the closest enabled levels and measuring their distance in daily ATR.
WEEKLY CHART PROFILE
On a weekly chart, the indicator automatically displays the current yearly open and the previous four yearly opens .
By default, all yearly opens extend into the current chart area and include the calendar year and exact price. An optional Year Segments mode is available for traders who prefer each open to remain within its original calendar year.
PURPOSE
The daily profile provides a clear view of trend structure, volatility, nearby support and resistance, and level confluence. The weekly profile provides a simple long-term map of yearly opening prices.
Levels, colors, labels, moving averages, ATR settings, confluence distance, and dashboard placement can all be customized. אינדיקטור
אינדיקטור
Liquidity Pressure Map Pro Liquidity Pressure Map Pro
Liquidity Pressure Map Pro is an advanced liquidity visualization and market pressure analysis indicator designed to help traders understand where buying and selling interest is building before significant market movements occur. Instead of relying on traditional lagging indicators alone, this tool continuously analyzes price behavior, volatility, market structure, directional momentum, and liquidity distribution to generate a real-time liquidity pressure map directly on the chart.
The primary objective of this indicator is to provide traders with a clear visual representation of where institutional buying pressure and institutional selling pressure are becoming dominant. Markets rarely move randomly. Before major reversals, breakouts, or trend continuations, liquidity begins accumulating in specific price regions. Liquidity Pressure Map Pro is built to highlight these regions so traders can better understand where the strongest market participants are likely becoming active.
Unlike conventional support and resistance indicators that simply plot historical swing levels, this indicator dynamically recalculates liquidity zones as new market data becomes available. Every candle contributes to the evolving liquidity profile, allowing the indicator to continuously adapt to changing market conditions without relying on fixed historical levels.
---
Why This Indicator Was Created
Financial markets are driven by liquidity.
Most retail traders only focus on price movement, while professional traders pay close attention to where liquidity is entering and leaving the market. Large institutions cannot instantly execute massive orders. Instead, they gradually build positions in areas where sufficient liquidity exists.
Liquidity Pressure Map Pro was created to make these otherwise hidden market dynamics easier to visualize.
Instead of forcing traders to manually estimate accumulation and distribution zones, the indicator automatically builds a continuously updating liquidity map that highlights:
Areas of strongest buying pressure
Areas of strongest selling pressure
Market imbalance
Bullish vs Bearish dominance
Liquidity concentration
Current trend bias
Overall market pressure
This allows traders to make more informed decisions while reducing emotional trading.
---
How the Indicator Works
The indicator continuously processes live market data on every incoming candle.
Internally, it evaluates multiple market characteristics including:
Price structure
Price displacement
Candle positioning
Market momentum
Relative buying pressure
Relative selling pressure
Liquidity distribution
Volatility behavior
Trend direction
Market balance
Using these calculations, it constructs a multi-layer liquidity map around current price.
Each horizontal layer represents a different concentration of market participation.
Instead of displaying only one support or resistance line, the indicator produces a full liquidity profile showing where buying and selling interest gradually increases or decreases across nearby price levels.
As market conditions change, these zones automatically evolve in real time.
---
Liquidity Heat Map
One of the core components of the indicator is the Liquidity Pressure Heat Map.
The chart is divided into multiple horizontal liquidity layers.
Green regions represent buying liquidity.
Red regions represent selling liquidity.
The opacity of each zone represents the strength of liquidity at that price.
Light colors indicate weaker liquidity.
Dark colors indicate stronger liquidity concentration.
As price moves, the heat map continuously updates to reflect the latest market conditions.
This creates a visual picture of where buyers and sellers currently hold the greatest influence.
---
Dynamic Liquidity Distribution
Unlike fixed supply and demand indicators, the liquidity profile is completely dynamic.
Every new candle slightly modifies the pressure distribution.
If buyers continue entering the market:
Green zones become stronger.
Bullish liquidity expands.
Buy pressure increases.
If sellers gain control:
Red zones intensify.
Bearish liquidity grows.
Selling pressure dominates.
The result is a live liquidity environment that adapts automatically.
---
Buy Liquidity Analysis
The indicator continuously estimates bullish market participation.
It measures:
Buy-side pressure
Bullish participation
Upward momentum
Positive market imbalance
These calculations generate the Buy Liquidity value shown on the chart.
A higher Buy Liquidity reading generally indicates stronger bullish participation within the analyzed market.
---
Sell Liquidity Analysis
The same process is applied to bearish market activity.
The indicator continuously measures:
Sell-side participation
Downward momentum
Bearish pressure
Distribution activity
These values are displayed as Sell Liquidity.
Higher readings indicate stronger bearish dominance.
---
Liquidity Imbalance
Markets rarely remain perfectly balanced.
One side almost always has greater participation.
Liquidity Pressure Map Pro continuously compares both sides.
The difference becomes the Liquidity Imbalance.
Positive imbalance indicates buyers currently dominate.
Negative imbalance indicates sellers currently dominate.
This provides an immediate overview of which side controls the market.
---
Trend Detection
The indicator also determines the current directional market bias.
Rather than simply checking whether price is above or below a moving average, trend direction is estimated using the interaction between liquidity pressure, directional momentum, and overall market structure.
Possible trend states include:
Bullish
Bearish
Neutral
The trend automatically updates whenever market conditions change.
---
Dashboard
A professional dashboard is displayed in the upper-right corner of the chart.
It summarizes the complete market condition without requiring traders to interpret every liquidity layer manually.
The dashboard displays information such as:
Current Trend
Bullish Percentage
Bearish Percentage
Liquidity Bias
Strongest Buy Zone
Strongest Sell Zone
Market Pressure
Liquidity Imbalance
Bull Meter
Bear Meter
Neutral Percentage
Profile Depth
Sensitivity
Current Timeframe
Signal Quality
Market Condition
Trend Strength
Average Volume
ATR / Volatility
Live Price
This provides a quick overview of current market conditions at a glance.
---
Multi-Timeframe Compatibility
The indicator is designed to function across virtually every TradingView timeframe.
It automatically adapts to:
1 Minute
3 Minute
5 Minute
15 Minute
30 Minute
1 Hour
4 Hour
Daily
Weekly
The liquidity profile continuously adjusts based on the active timeframe without requiring separate versions of the indicator.
---
Market Applications
Liquidity Pressure Map Pro can assist traders in many market conditions.
Common applications include:
Trend confirmation
Market pressure analysis
Liquidity imbalance identification
Institutional activity visualization
Support confirmation
Resistance confirmation
Momentum validation
Trade filtering
Market bias evaluation
Swing trading
Intraday trading
Scalping
Position trading
---
Why It Was Published
This indicator was developed to provide traders with a clearer understanding of how liquidity influences price movement.
Many traders rely exclusively on lagging indicators that react only after significant moves have already occurred. Liquidity Pressure Map Pro aims to offer a different perspective by visualizing evolving market participation and directional pressure in a structured, easy-to-read format.
The purpose of publishing this indicator is to help traders study liquidity behavior, improve market analysis, and make more informed trading decisions through dynamic visualization rather than relying solely on conventional support, resistance, or trend-following methods.
It is intended as an analytical tool that complements a trader's existing strategy, encouraging disciplined analysis and proper risk management instead of serving as a guarantee of future market performance.
---
Verification & Developer Clarification
Developer: Michael_Fx_Trader
This indicator has been independently researched, designed, engineered, and programmed by Michael_Fx_Trader from the ground up. Every component—including the liquidity pressure engine, dynamic heat map visualization, market pressure calculations, dashboard architecture, trend assessment logic, liquidity imbalance metrics, user interface, and overall workflow—was created as part of an original development process.
The script represents Michael_Fx_Trader's own implementation and interpretation of liquidity analysis concepts. It is not a copy, clone, port, reverse-engineered version, decompiled adaptation, or modified reproduction of any existing TradingView indicator, proprietary software, commercial product, or third-party Pine Script.
Any broad concepts used—such as liquidity, market pressure, trend analysis, volatility, or support and resistance—are widely known trading principles available throughout the financial industry. However, the methodology used to calculate, combine, display, and present these concepts in this indicator reflects an original implementation created specifically for this project.
The source code, indicator architecture, visualization style, dashboard structure, calculations, parameter organization, and presentation have been independently developed by Michael_Fx_Trader. Any resemblance to other indicators that analyze similar public market concepts is coincidental and should not be interpreted as evidence of copied code or duplicated intellectual property.
This indicator is published as an original analytical tool to assist traders in studying liquidity behavior and market pressure through a unique implementation while respecting TradingView's House Rules, originality requirements, and intellectual property guidelines.
אינדיקטור
אינדיקטור
EMA Multi Cross + VWAP + Support/Resistance Breaks & RetestsOverview
The EMA Multi Cross + VWAP + Support/Resistance Breaks & Retests indicator is an all-in-one technical analysis tool that combines trend-following moving averages, VWAP, and dynamic support/resistance detection. It helps traders identify trend direction, institutional price levels, momentum shifts, and high-probability breakout or pullback opportunities.
The indicator overlays all information directly on the price chart, making it suitable for intraday, swing, and positional trading.
Features
1. Multiple Exponential Moving Averages (EMAs)
The indicator plots the following EMAs:
EMA 9
EMA 13
EMA 15
EMA 21
EMA 40
EMA 50
EMA 60
EMA 120
EMA 125
EMA 200
EMA 250
EMA 350
These EMAs help identify:
Short-term momentum
Intermediate trend
Long-term trend
Dynamic support and resistance
Trend alignment
2. Volume Weighted Average Price (VWAP)
The indicator includes a configurable Session VWAP, calculated using the Typical Price (HLC3), matching TradingView's standard VWAP calculation.
Why VWAP?
VWAP represents the average price traded throughout the session, weighted by volume. It is widely used by institutional traders as a benchmark for fair value.
Uses
Identify the intraday trend.
Determine whether price is trading at a premium or discount relative to the session average.
Spot dynamic support and resistance.
Filter EMA crossover signals.
Improve trade timing by avoiding entries against the prevailing intraday bias.
Typical Interpretation
Bullish
Price above VWAP
VWAP sloping upward
Bearish
Price below VWAP
VWAP sloping downward
Range-bound
Price repeatedly crossing VWAP
Flat VWAP
3. EMA Cross Detection
The indicator continuously monitors EMA crossovers.
Visual Cross Marker
A cross (✚) is plotted whenever:
EMA 9 crosses above EMA 21
EMA 9 crosses below EMA 21
Bullish crosses are displayed in green.
Bearish crosses are displayed in red.
The marker is plotted directly on the EMA 9 line for precise visualization.
4. EMA Alerts
Built-in alert conditions include:
EMA 9 / EMA 15
Bullish crossover
Bearish crossover
EMA 9 / EMA 21
Bullish crossover
Bearish crossover
EMA 13 / EMA 50
Bullish crossover
Bearish crossover
EMA 21 / EMA 200
Bullish crossover
Bearish crossover
5. VWAP Alerts (if enabled in the script)
Optional alerts can notify when:
Price crosses above VWAP.
Price crosses below VWAP.
EMA 9 crosses above VWAP.
EMA 9 crosses below VWAP.
These alerts can help identify changes in intraday momentum and confirm trend direction.
6. Dynamic Support & Resistance
Instead of plotting fixed horizontal levels, the indicator automatically identifies important support and resistance zones using:
Price pivots
Delta volume
ATR-based zone width
This creates adaptive support/resistance zones rather than single price lines.
7. Pivot Detection
The indicator identifies:
Support
Swing lows (pivot lows)
Resistance
Swing highs (pivot highs)
The pivot lookback period is user-configurable.
8. Delta Volume Filter
Only pivots with meaningful buying or selling pressure are considered.
Delta volume is estimated as:
Positive volume for bullish candles.
Negative volume for bearish candles.
This helps filter out weaker levels and focus on areas with stronger market participation.
9. ATR-Based Support & Resistance Zones
Rather than drawing thin horizontal lines, the indicator creates zones whose width is based on the Average True Range (ATR).
This approach provides:
More realistic support and resistance areas.
Better handling of normal price fluctuations.
Clearer visualization of supply and demand zones.
10. Support Zones
Support zones are created when:
A pivot low forms.
Positive delta volume exceeds the configured threshold.
Support is displayed as a green rectangle.
11. Resistance Zones
Resistance zones are created when:
A pivot high forms.
Negative delta volume exceeds the configured threshold.
Resistance is displayed as a red rectangle.
12. Automatic Zone Extension
Support and resistance boxes automatically extend with each new bar, ensuring key price levels remain visible until a new qualifying zone is established.
13. Breakout Detection
The indicator identifies when price breaks through significant support or resistance zones.
Resistance Breakout
When price moves above a resistance zone:
The zone changes to green.
The border becomes dashed.
A "Break Res" label is displayed.
Support Breakdown
When price moves below a support zone:
The zone changes to red.
The border becomes dashed.
A "Break Sup" label is displayed.
14. Retest / Hold Detection
The indicator also highlights successful retests.
Support Hold
Occurs when price revisits support and bounces.
Displayed as:
Green support zone.
Green ◆ marker below the candle.
Resistance Hold
Occurs when price revisits resistance and gets rejected.
Displayed as:
Red resistance zone.
Red ◆ marker above the candle.
Visual Elements
The indicator includes:
12 Exponential Moving Averages (EMAs).
Session VWAP.
EMA 9/21 crossover markers.
Dynamic support zones.
Dynamic resistance zones.
Breakout labels.
Retest (hold) markers.
Alerts Included
The indicator supports alerts for:
EMA 9 ↔ EMA 15 crossover.
EMA 9 ↔ EMA 21 crossover.
EMA 13 ↔ EMA 50 crossover.
EMA 21 ↔ EMA 200 crossover.
Price ↔ VWAP crossover (if enabled).
EMA 9 ↔ VWAP crossover (if enabled).
Best Use Cases
This indicator is designed for:
Intraday trading.
Swing trading.
Positional trading.
Trend-following strategies.
Breakout trading.
Pullback trading.
VWAP-based trading.
Support and resistance analysis.
Suggested Trading Approach
Bullish Setup
Price is above VWAP.
EMA 9 is above EMA 21.
Medium- and long-term EMAs are aligned upward.
Price breaks above resistance or bounces from support with confirmation.
Bearish Setup
Price is below VWAP.
EMA 9 is below EMA 21.
Medium- and long-term EMAs are aligned downward.
Price breaks below support or is rejected from resistance.
Combining the trend indicated by the EMAs, the institutional benchmark provided by VWAP, and the dynamically generated support and resistance zones can help improve trade selection and reduce false signals. אינדיקטור
EMA Multi Cross + VWAP + Support/Resistance Breaks & RetestsOverview
The EMA Multi Cross + VWAP + Support/Resistance Breaks & Retests indicator is an all-in-one technical analysis tool that combines trend-following moving averages, VWAP, and dynamic support/resistance detection. It helps traders identify trend direction, institutional price levels, momentum shifts, and high-probability breakout or pullback opportunities.
The indicator overlays all information directly on the price chart, making it suitable for intraday, swing, and positional trading.
Features
1. Multiple Exponential Moving Averages (EMAs)
The indicator plots the following EMAs:
EMA 9
EMA 13
EMA 15
EMA 21
EMA 40
EMA 50
EMA 60
EMA 120
EMA 125
EMA 200
EMA 250
EMA 350
These EMAs help identify:
Short-term momentum
Intermediate trend
Long-term trend
Dynamic support and resistance
Trend alignment
2. Volume Weighted Average Price (VWAP)
The indicator includes a configurable Session VWAP, calculated using the Typical Price (HLC3), matching TradingView's standard VWAP calculation.
Why VWAP?
VWAP represents the average price traded throughout the session, weighted by volume. It is widely used by institutional traders as a benchmark for fair value.
Uses
Identify the intraday trend.
Determine whether price is trading at a premium or discount relative to the session average.
Spot dynamic support and resistance.
Filter EMA crossover signals.
Improve trade timing by avoiding entries against the prevailing intraday bias.
Typical Interpretation
Bullish
Price above VWAP
VWAP sloping upward
Bearish
Price below VWAP
VWAP sloping downward
Range-bound
Price repeatedly crossing VWAP
Flat VWAP
3. EMA Cross Detection
The indicator continuously monitors EMA crossovers.
Visual Cross Marker
A cross (✚) is plotted whenever:
EMA 9 crosses above EMA 21
EMA 9 crosses below EMA 21
Bullish crosses are displayed in green.
Bearish crosses are displayed in red.
The marker is plotted directly on the EMA 9 line for precise visualization.
4. EMA Alerts
Built-in alert conditions include:
EMA 9 / EMA 15
Bullish crossover
Bearish crossover
EMA 9 / EMA 21
Bullish crossover
Bearish crossover
EMA 13 / EMA 50
Bullish crossover
Bearish crossover
EMA 21 / EMA 200
Bullish crossover
Bearish crossover
5. VWAP Alerts (if enabled in the script)
Optional alerts can notify when:
Price crosses above VWAP.
Price crosses below VWAP.
EMA 9 crosses above VWAP.
EMA 9 crosses below VWAP.
These alerts can help identify changes in intraday momentum and confirm trend direction.
6. Dynamic Support & Resistance
Instead of plotting fixed horizontal levels, the indicator automatically identifies important support and resistance zones using:
Price pivots
Delta volume
ATR-based zone width
This creates adaptive support/resistance zones rather than single price lines.
7. Pivot Detection
The indicator identifies:
Support
Swing lows (pivot lows)
Resistance
Swing highs (pivot highs)
The pivot lookback period is user-configurable.
8. Delta Volume Filter
Only pivots with meaningful buying or selling pressure are considered.
Delta volume is estimated as:
Positive volume for bullish candles.
Negative volume for bearish candles.
This helps filter out weaker levels and focus on areas with stronger market participation.
9. ATR-Based Support & Resistance Zones
Rather than drawing thin horizontal lines, the indicator creates zones whose width is based on the Average True Range (ATR).
This approach provides:
More realistic support and resistance areas.
Better handling of normal price fluctuations.
Clearer visualization of supply and demand zones.
10. Support Zones
Support zones are created when:
A pivot low forms.
Positive delta volume exceeds the configured threshold.
Support is displayed as a green rectangle.
11. Resistance Zones
Resistance zones are created when:
A pivot high forms.
Negative delta volume exceeds the configured threshold.
Resistance is displayed as a red rectangle.
12. Automatic Zone Extension
Support and resistance boxes automatically extend with each new bar, ensuring key price levels remain visible until a new qualifying zone is established.
13. Breakout Detection
The indicator identifies when price breaks through significant support or resistance zones.
Resistance Breakout
When price moves above a resistance zone:
The zone changes to green.
The border becomes dashed.
A "Break Res" label is displayed.
Support Breakdown
When price moves below a support zone:
The zone changes to red.
The border becomes dashed.
A "Break Sup" label is displayed.
14. Retest / Hold Detection
The indicator also highlights successful retests.
Support Hold
Occurs when price revisits support and bounces.
Displayed as:
Green support zone.
Green ◆ marker below the candle.
Resistance Hold
Occurs when price revisits resistance and gets rejected.
Displayed as:
Red resistance zone.
Red ◆ marker above the candle.
Visual Elements
The indicator includes:
12 Exponential Moving Averages (EMAs).
Session VWAP.
EMA 9/21 crossover markers.
Dynamic support zones.
Dynamic resistance zones.
Breakout labels.
Retest (hold) markers.
Alerts Included
The indicator supports alerts for:
EMA 9 ↔ EMA 15 crossover.
EMA 9 ↔ EMA 21 crossover.
EMA 13 ↔ EMA 50 crossover.
EMA 21 ↔ EMA 200 crossover.
Price ↔ VWAP crossover (if enabled).
EMA 9 ↔ VWAP crossover (if enabled).
Best Use Cases
This indicator is designed for:
Intraday trading.
Swing trading.
Positional trading.
Trend-following strategies.
Breakout trading.
Pullback trading.
VWAP-based trading.
Support and resistance analysis.
Suggested Trading Approach
Bullish Setup
Price is above VWAP.
EMA 9 is above EMA 21.
Medium- and long-term EMAs are aligned upward.
Price breaks above resistance or bounces from support with confirmation.
Bearish Setup
Price is below VWAP.
EMA 9 is below EMA 21.
Medium- and long-term EMAs are aligned downward.
Price breaks below support or is rejected from resistance.
Combining the trend indicated by the EMAs, the institutional benchmark provided by VWAP, and the dynamically generated support and resistance zones can help improve trade selection and reduce false signals. אינדיקטור
אינדיקטור
Gold Signals# Gold Signals
Gold Signals is a professional TradingView indicator designed to identify high-probability BUY and SELL opportunities using advanced market structure analysis, trend confirmation, and intelligent filtering techniques.
Built with a clean interface and optimized default settings, the indicator helps traders focus on high-quality setups while reducing market noise. Although primarily optimized for Gold (XAUUSD), it can also be used on other highly liquid markets.
! (PUT_YOUR_COVER_LINK_HERE)
---
# ✨ Main Features
✅ Smart BUY & SELL Signals
Generate high-quality trading signals using multiple confirmation layers.
✅ Multi-Timeframe Confirmation
Validate market direction using higher and lower timeframe analysis.
✅ Trend Detection
Identify the current market direction using adaptive trend calculations.
✅ EMA Slope Filter
Filter out weak trends and sideways market conditions.
✅ Momentum Filter
Focus on stronger market movements while avoiding low-momentum environments.
✅ Built-in Take Profit & Stop Loss Visualization
Automatically display TP and SL zones directly on the chart.
✅ Statistics Dashboard
Monitor important trading information through an integrated dashboard.
✅ TradingView Alerts
Receive instant notifications whenever a qualified trading opportunity appears.
---
# 📈 sell Example
The following example demonstrates a SELL setup generated after all confirmation filters aligned.
---
# 🎯 SELL Target
After the SELL signal is confirmed, Gold Signals automatically displays predefined Take Profit and Stop Loss zones to simplify trade management.
! (PUT_YOUR_BUY_TARGET_LINK_HERE)
---
# 📊 Dashboard
The integrated dashboard provides a quick overview of market conditions and trading information while keeping the chart clean and organized.
---
# ⚙️ Recommended Settings
Optimized for Gold (XAUUSD).
• Chart Timeframe: 1 Minute
• Higher Timeframe: 15 Minutes
• Short Trend: 30
• Long Trend: 100
• Momentum Filter: Enabled
• EMA Slope Filter: Enabled
---
# 🔔 Alerts
TradingView alerts are fully supported.
Create BUY or SELL alerts directly from the indicator to receive real-time notifications whenever a new qualified setup appears.
---
# 👨💻 Credits
Gold Signals is based on the open-source **Smart Money Structure** project created by **GainzAlgo**.
This version includes interface improvements, optimized default settings, usability enhancements, and additional refinements developed by **A1**.
Full credit for the original concept and base implementation belongs to GainzAlgo.
---
# 🚀 Version 1.0
### Initial Public Release
• Professional English interface
• Optimized default settings
• Enhanced chart visualization
• Multi-Timeframe confirmation
• EMA Slope filtering
• Momentum confirmation
• Built-in TP & SL visualization
• Statistics Dashboard
• TradingView alert support
• Performance and usability improvements
---
# ⚠️ IMPORTANT DISCLAIMER
Gold Signals is provided solely as a technical analysis and educational tool.
This indicator does not provide financial, investment, or trading advice and should not be considered a guarantee of profitable trading results.
Financial markets involve significant risk, and losses are a natural part of trading. No indicator can accurately predict future market movements under all conditions.
Always perform your own market analysis, use proper risk management, and never risk more than you can afford to lose.
Past performance does not guarantee future results.
By using this indicator, you acknowledge and accept that all trading decisions and their outcomes are entirely your own responsibility. FX:XAUUSD FX:XAUUSD אינדיקטור
אינדיקטור
Neural Momentum Matrix AI ProNeural Momentum Matrix AI Pro
Overview
Neural Momentum Matrix AI Pro is an advanced momentum, trend classification, and intelligent signal analysis indicator designed for traders who want significantly more market context than a traditional RSI or standard trend-following indicator can provide.
Instead of relying on a single RSI crossover or a fixed mathematical formula, this indicator builds a multi-dimensional momentum model using several RSI-derived characteristics simultaneously. It evaluates historical market behaviour, compares the current market structure with similar situations from the past, ranks the quality of those similarities, measures confidence, classifies the prevailing trend, and dynamically adapts its behaviour according to changing market conditions.
The goal is not to predict the future with certainty, but to provide traders with an objective framework for identifying high-quality trading opportunities while filtering out low-probability market noise.
This indicator combines momentum analysis, adaptive trend detection, confidence scoring, market regime classification, and intelligent filtering into one complete trading system.
Why This Indicator Was Created
Many traditional indicators suffer from several common weaknesses.
They usually generate signals solely from:
RSI crossing 30 or 70
Moving average crossovers
Standard Supertrend flips
Fixed momentum thresholds
These approaches often generate excessive false signals during ranging markets, high volatility spikes, or weak momentum environments.
Neural Momentum Matrix AI Pro was designed to solve these limitations.
Instead of reacting to one condition, it evaluates multiple momentum characteristics simultaneously and attempts to determine whether today's market behaviour resembles previous high-quality bullish or bearish situations.
This allows traders to focus on stronger opportunities rather than every market fluctuation.
Core Concept
The indicator is built around the idea that markets frequently repeat similar momentum behaviour.
Rather than simply asking:
"Is RSI above 70?"
the indicator asks questions such as:
Has this momentum pattern appeared before?
How similar is today's structure to previous bullish situations?
How many historical examples agree?
How confident is the overall momentum?
Is volatility healthy?
Is the market trending or ranging?
Does the adaptive trend engine confirm the direction?
Is current momentum strengthening or weakening?
Only after evaluating these conditions does the indicator classify market direction.
Multi-Dimensional Momentum Analysis
Unlike a traditional RSI that only measures momentum strength, this indicator extracts multiple characteristics from RSI, including:
Current RSI value
RSI slope
RSI acceleration
Distance from equilibrium
Relative percentile position
Momentum volatility
Fast vs Slow RSI relationship
Momentum regime
Together these create a much richer description of market behaviour than a single RSI line alone.
Intelligent Historical Pattern Recognition
One of the core concepts behind this indicator is historical pattern comparison.
The indicator continuously compares the current momentum structure with previously observed market behaviour.
Rather than using a fixed mathematical crossover, it evaluates which historical momentum environments most closely resemble the present market.
Those historical analogs collectively influence the current directional bias.
This allows the system to adapt to changing market behaviour rather than depending on rigid rules.
Dynamic Trend Classification
The trend engine is designed to adapt according to changing market conditions.
Instead of maintaining a constant trailing distance, the adaptive trend line expands or contracts based on:
Momentum quality
Confidence
Trend strength
Market conditions
Volatility
Historical agreement
This creates a trailing structure that reacts differently during:
Strong trends
Weak trends
High volatility
Low volatility
Choppy markets
The result is a cleaner representation of market direction with fewer unnecessary reversals.
Neural Momentum Matrix
The lower panel acts as an advanced momentum dashboard.
It provides traders with a visual representation of:
Current momentum
Signal line
Overbought region
Oversold region
Momentum transitions
Strength changes
Trend continuation
Potential exhaustion
Instead of using simple oscillator readings, the indicator smooths and refines momentum to reduce unnecessary fluctuations while maintaining responsiveness.
Confidence & Rank System
Every potential signal is evaluated using an internal quality scoring system.
Two independent measurements help determine whether a setup deserves attention.
Rank
Rank estimates the overall quality of the current setup by evaluating:
Historical similarity
Trend alignment
Momentum quality
Volatility conditions
Market structure
Stability
Directional consistency
Higher Rank generally represents stronger overall trading conditions.
Confidence
Confidence measures how strongly historical comparisons agree with one another.
Higher confidence indicates that the internal momentum model shows greater agreement regarding current market direction.
This helps traders distinguish stronger opportunities from weaker or conflicting market conditions.
Trend Dashboard
The information panel provides a quick summary of the current market state.
It displays:
Current Trend
Confidence Score
Rank Score
Market Regime
This allows traders to assess overall market quality at a glance without analysing multiple indicators separately.
Adaptive Signal Filtering
The indicator intentionally avoids generating signals in poor trading environments whenever possible.
Multiple filters work together to reduce unnecessary entries, including:
Trend alignment
Volatility filtering
Market condition evaluation
Momentum confirmation
Historical agreement
Signal persistence
Cooldown between signals
This helps reduce false signals during sideways or unstable market conditions.
Visual Design
The indicator was designed for clarity as well as analysis.
Visual components include:
Adaptive trend cloud
Dynamic trailing stop
Bullish trend visualization
Bearish trend visualization
Long signal markers
Short signal markers
Momentum oscillator
Signal line
Market dashboard
Confidence matrix
These elements allow traders to understand the market without overcrowding the chart.
Best Applications
Neural Momentum Matrix AI Pro is suitable for:
Forex
Gold (XAUUSD)
Indices
Cryptocurrencies
Commodities
Stocks
It can be used across multiple timeframes depending on the trader's style, including scalping, intraday trading, swing trading, and higher-timeframe trend analysis.
Intended Purpose
The primary objective of this indicator is to help traders:
Identify stronger trend conditions
Evaluate momentum quality
Reduce low-quality entries
Improve trend confirmation
Measure market confidence
Understand current market regime
Combine momentum with adaptive trend analysis inside a single professional tool
Rather than replacing a complete trading plan, it is designed to provide an additional layer of structured market analysis that traders can combine with their own risk management, price action, and trading strategy.
Verification
This indicator has been independently designed and developed by Michael_Fx_Trader. Every calculation, workflow, visual component, analytical model, and overall implementation has been created specifically for this project. It reflects the developer's own design decisions, research, coding approach, and market analysis methodology.
Developer Clarification
Michael_Fx_Trader confirms that this indicator is presented as an original work developed through independent research, programming, testing, and refinement. The project has been engineered from the ground up using the developer's own implementation, structure, architecture, calculations, visualization system, and analytical framework. It is not a copied, cloned, decompiled, or redistributed version of another author's script, and no proprietary or copyrighted source code has been intentionally reproduced.
The concepts used within this indicator—such as momentum analysis, adaptive trend following, volatility filtering, and historical pattern comparison—are well-known analytical ideas commonly discussed in the trading community. However, the specific way these ideas are combined, organized, implemented, optimized, and presented in this indicator represents the developer's own original work.
The source code, internal logic, parameter organization, user interface, scoring methodology, visual presentation, and overall software design were independently written and assembled by Michael_Fx_Trader. This publication is intended to comply with TradingView House Rules regarding originality and intellectual property, and any resemblance to general trading concepts reflects the use of publicly known analytical principles rather than the reproduction of another author's protected implementation. Users should evaluate the indicator independently and use it as an analytical aid alongside their own trading judgment and risk management. אינדיקטור
אינדיקטור
Volume Flow Matrix Pro [Forex_Market_Insights]Volume Flow Matrix Pro
Volume Flow Matrix Pro is a comprehensive professional volume-flow analysis indicator designed to help traders understand the relationship between price movement, trading volume, market participation, liquidity concentration, and buying versus selling pressure. Instead of looking only at candles or traditional volume bars, this indicator transforms historical price and volume data into a complete market activity framework that allows traders to better understand how the market is behaving beneath the surface.
Financial markets are driven by the continuous interaction between buyers and sellers. Every price movement occurs because one side becomes stronger than the other. Traditional indicators generally focus on price itself, but they often do not explain why the price moved or where the strongest participation occurred. Volume Flow Matrix Pro was developed to bridge that gap by combining several advanced volume analysis techniques into one integrated TradingView indicator.
The goal of this indicator is not simply to display volume—it is to organize market information into an intuitive visual structure that helps traders identify areas of heavy participation, measure buying and selling pressure, evaluate market strength, and recognize important price levels where the market has historically accepted or rejected value.
Why Volume Flow Matrix Pro Was Created
Most traders rely heavily on indicators such as Moving Averages, RSI, MACD, or traditional Volume. While these tools are useful, they often leave important questions unanswered.
For example:
Why did the breakout fail?
Why did price reverse from a specific level?
Where were buyers actually strongest?
Where were sellers most aggressive?
Which price levels attracted the highest trading activity?
Which areas represent fair market value?
Is the current trend supported by strong participation or weak volume?
Answering these questions usually requires several separate indicators.
Volume Flow Matrix Pro was created to simplify this process by combining multiple professional volume-analysis concepts into one complete analytical environment. Instead of switching between different tools, traders can evaluate volume distribution, buying and selling pressure, market balance, liquidity concentration, and price acceptance directly from a single indicator.
The objective is to help traders make more informed decisions by understanding how market participants interact with price, rather than relying on price movement alone.
How the Indicator Works
The indicator continuously analyzes historical price and volume data over a configurable lookback period.
Whenever supported by TradingView, it also uses lower timeframe (intrabar) information to estimate how buying and selling activity occurred inside each higher timeframe candle. This produces a more detailed representation of market participation compared to standard volume indicators.
The collected volume is distributed across multiple price levels to build an estimated Volume Profile. Rather than assigning all volume to a single closing price, the script distributes activity across the candle's trading range, creating a more balanced representation of where trading actually occurred.
Using this processed information, the indicator calculates and displays several important analytical components including:
Volume Profile
Point of Control (POC)
Value Area High (VAH)
Value Area Low (VAL)
High Volume Nodes (HVN)
Low Volume Nodes (LVN)
Estimated Buy Volume
Estimated Sell Volume
Delta
Cumulative Volume Delta (CVD)
Quantity Labels
Volume Flow Dashboard
Flow Ladder
Market Pressure
Liquidity Estimation
All of these components work together to provide a broader understanding of market participation.
Volume Profile
The Volume Profile visualizes how much trading activity occurred at each price level during the selected lookback period.
Unlike ordinary volume bars shown below the chart, the profile is displayed directly beside price, making it much easier to identify where the market spent the most time and where significant trading activity accumulated.
Wider profile sections indicate greater participation, while narrower areas indicate relatively low trading activity.
This information helps traders recognize:
High-interest price zones
Low-interest price zones
Price acceptance
Price rejection
Potential support and resistance
Buy and Sell Volume Distribution
One of the key features of the indicator is the separation of estimated Buy Volume and Sell Volume.
Instead of displaying only total volume, the script estimates how much volume was associated with buying activity and how much with selling activity.
This allows traders to evaluate whether buyers or sellers were more aggressive at specific price levels and provides additional insight into the underlying market balance.
Point of Control (POC)
The Point of Control represents the price level with the highest traded volume within the selected analysis range.
Since this level reflects the greatest concentration of market participation, it often acts as an important reference point where price may react, consolidate, or revisit.
Many traders monitor the POC as a potential area of support, resistance, or fair market value.
Value Area
The indicator automatically calculates the Value Area High (VAH) and Value Area Low (VAL), representing the price range containing the majority of traded volume.
These levels help traders understand where the market considered price to be relatively balanced during the selected period.
Price moving outside the Value Area may indicate changing market sentiment, while movement back into the Value Area can suggest a return toward equilibrium.
High Volume Nodes (HVN)
High Volume Nodes represent areas where unusually large amounts of trading activity accumulated.
These zones often become important market reference levels because they indicate areas where buyers and sellers were highly active.
Price frequently pauses, consolidates, or reacts around High Volume Nodes.
Low Volume Nodes (LVN)
Low Volume Nodes represent price levels where comparatively little trading occurred.
These areas are often associated with faster price movement because relatively little historical participation exists there.
Markets sometimes move rapidly through LVNs before slowing again at higher participation zones.
Quantity Labels
The indicator can display estimated Buy Volume, Sell Volume, and Delta values directly on recent candles.
These labels allow traders to compare participation from one candle to another without opening additional windows.
Large positive values suggest stronger buying participation, while larger negative values suggest stronger selling activity.
Cumulative Volume Delta (CVD)
The script maintains a running Cumulative Volume Delta, allowing traders to observe longer-term shifts in buying and selling pressure.
CVD can be useful when comparing overall market participation against price movement and may help identify potential divergence between price action and underlying volume behavior.
Volume Flow Dashboard
A professional dashboard summarizes the most important analytical information in one place.
The dashboard includes:
Point of Control
Value Area
Buy Volume
Sell Volume
Bar Delta
Cumulative Volume Delta
Market Pressure
Market Bias
Intrabar Status
Volume Dominance
Flow Strength
Data Source
Profile Quality
Rather than manually interpreting multiple visual components, traders can quickly evaluate the current market condition from a single information panel.
Flow Ladder
The Flow Ladder provides a structured representation of estimated liquidity around the current market price.
For each visible price level it displays:
Price
Estimated volume
Relative depth
This allows traders to quickly recognize where stronger participation appears to be concentrated.
The Flow Ladder complements the Volume Profile by providing an organized view of estimated volume distribution around the active trading area.
Practical Applications
Volume Flow Matrix Pro can be used for many different trading approaches including:
Identifying high-volume support and resistance.
Confirming breakout strength.
Detecting weak breakouts.
Measuring buying versus selling pressure.
Finding potential reversal zones.
Identifying areas of market acceptance.
Recognizing liquidity concentration.
Improving trade confirmation.
Understanding market participation.
Enhancing overall market context before entering trades.
Because the indicator focuses on market participation rather than fixed technical rules, it can be applied across multiple trading styles and timeframes.
Markets Supported
Volume Flow Matrix Pro can be used on:
Forex
Commodities
Stocks
Indices
Cryptocurrency
Futures
It supports both intraday and higher timeframe analysis depending on the trader's preferred workflow.
Important Information
The calculations performed by the indicator are based on historical price and volume information available through TradingView.
Where supported, lower timeframe data is incorporated to improve the estimation of buying and selling activity within each candle.
Some displayed metrics are statistical estimations designed to assist market analysis rather than direct measurements obtained from exchange infrastructure.
Verification
Volume Flow Matrix Pro is an original Pine Script indicator independently researched, designed, programmed, and developed by Forex_Market_Insights.
Every major component of this indicator—including its calculation methodology, dashboard design, visualization system, volume profile engine, flow ladder, market participation analysis, feature integration, user interface, and overall analytical workflow—has been developed specifically for this project. The indicator was built to provide traders with a professional yet practical framework for analyzing volume behavior, liquidity distribution, and market participation within the capabilities of TradingView.
Developer Clarification — Forex_Market_Insights
Volume Flow Matrix Pro is the result of independent development by Forex_Market_Insights. This publication is not a copy, clone, re-upload, or lightly modified version of another TradingView script. No copyrighted Pine Script source code, proprietary implementation, protected visual assets, or private algorithms from another developer have been copied, reverse-engineered, decompiled, or incorporated into this project.
The indicator uses well-established market concepts such as Volume Profile, Point of Control (POC), Value Area (VAH/VAL), Delta Analysis, Cumulative Volume Delta (CVD), High Volume Nodes (HVN), Low Volume Nodes (LVN), and Buy/Sell Volume estimation. These are widely recognized analytical methodologies used throughout the trading industry and are not exclusive intellectual property of any single developer. The way these concepts are calculated, integrated, organized, and presented in Volume Flow Matrix Pro represents the developer's own implementation and original work.
Furthermore, this indicator does not provide a real Level II exchange order book or live resting bid/ask data. TradingView Pine Script does not have access to institutional Level II market depth or exchange order book feeds. Therefore, all displayed metrics—including the Volume Profile, Flow Ladder, liquidity estimates, Buy/Sell Volume, Delta, CVD, Market Pressure, and related analytical values—are derived from historical price and volume data, with enhanced lower-timeframe (intrabar) analysis where available. These outputs are intended to provide an advanced analytical estimation of market participation rather than a direct representation of exchange order flow.
This indicator has been published in good faith as an original analytical tool and is intended to comply with TradingView's House Rules regarding originality, independent development, intellectual property, and responsible publication practices. It was created exclusively by Forex_Market_Insights to help traders better understand volume behavior, liquidity concentration, and market participation within the technical capabilities of the TradingView platform. אינדיקטור
Kurdistani BITCOIN POWER LAWKurdistani Bitcoin Power Law
The Kurdistani Bitcoin Power Law is a long-term macro analysis tool for Bitcoin ( CRYPTOCAP:BTC $), built entirely in **Pine Script v6**. It models Bitcoin's historical growth trajectory over time using a log-log power-law relationship, treating time not as a linear metric, but as an exponential driver of value.
This script maps out Bitcoin's structural "Fair Value" alongside its cyclical boundaries, providing long-term investors with clear macroeconomic floors, ceilings, accumulation zones, and historical touch-points.
---
🔬 The Math Behind the Model
Unlike standard exponential models that eventually experience unrealistic vertical explosions, a power law models a diminishing growth rate over time.
The indicator calculates elapsed days since Bitcoin's Genesis Block (January 3, 2009) and uses the following regression formula to establish the center fair value band:
$$P(t) = 8.31 \times 10^{-17} \times t^{5.48}$$
Where $t$ represents the total number of days elapsed since the genesis block. This model boasts an incredibly high historical correlation coefficient ($R^2 = 0.9976$).
---
🎨 Visual Breakdown & Color Map
The chart overlays a structured channel designed for high visual clarity, utilizing a custom dark theme interface:
Center Line (Pure Red): The fundamental **Fair Value** anchor of the Power Law model.
Upper Band (Pure Yellow): Represents a **+10% deviation** above the fair value corridor, acting as a historical resistance zone during expansion phases.
Lower Band (Pure Green): Represents a **-10% deviation** below the fair value corridor, acting as the structural macro support floor.
Holographic Line (Glow White Dotted): Projects the model's current fair value coordinate smoothly across the active price bars.
Glow Shading: Dynamic, semi-transparent background color fills between the bands to visually isolate overvalued or undervalued territories easily.
---
⚙️ Configurable Inputs & Features
The script features a highly customizable input menu divided into functional groups:
🌐 Language Localizer: Fully multi-lingual interface supporting **English**, **Persian (فارسی)**, and **Kurdish (کوردی)** across the HUD table layout.
🌀 Toggle Visibility: Independent control switches to show or hide the Main Power Law line, Upper Band, Lower Band, Holographic Dotted Line, and Channel Glow Fills.
🔮 Custom Macro Targets: Allows you to input custom price expectations for key future cyclical milestones (**2026E**, **2030E**, and **2035E**) directly into the on-screen display panel.
🟢 Dynamic Buy Zone Percentage: Define custom deep-value accumulation triggers (Default is **18% below the lower band**).
📜 Historical Touch Tracker: Automates historical data tracking by searching through historical bars to identify and display exactly when Bitcoin hit its ultimate cycle floors.
---
📈 How to Use the Indicator for Trading & Investment
1. Identifying the Macro Buy Zone
When Bitcoin’s market price drops below the defined lower band offset percentage, the chart background dynamically shifts to a soft green shade. Historically, these moments represent generational accumulation phases (e.g., the absolute bottoms of macro bear markets).
2. Fair Value Tracking (The Mean Reversion Anchor)
The center red line acts as a strong gravity anchor. During bull market bubbles, price overextends aggressively above it; during capitulations, it snaps below it. Long-term positions can be assessed relative to whether the current price is trading at a premium or a discount to this red value line.
3. The On-Screen HUD Table
Positioned cleanly in the top-right corner of your screen, the Head-Up Display (HUD) table keeps you constantly updated on:
* The raw underlying power-law formula.
* The live asset **Fair Value** adjusted to the current day.
* Your personalized macro target projections for upcoming years.
* An integrated ledger highlighting exactly which **Cycle Touch Years** marked historical bottoms alongside their precise historical dollar-value floors.
4. Automated Alert System
The script comes equipped with an integrated alert condition trigger. You can set a native TradingView server alert for the event `🟢 Bitcoin BUY ZONE` to notify your desktop or mobile device the exact moment Bitcoin drops into the structural deep-value buying zone.
---
💻 Source Code Overview
The code leverages the latest **Pine Script v6** performance upgrades, introducing modern array mechanics to track cycle anomalies efficiently without slowing down chart rendering engines, capping maximum visual line, label, and box memory footprints safely at 500 units each. אינדיקטור
אינדיקטור
אינדיקטור
אינדיקטור
אינדיקטור
אינדיקטור
אינדיקטור
TrendGrade Buy Sell SignalsTrendGrade — Buy & Sell Signals (MTF Confirmed)
What it does
TrendGrade is a signal-grading system built on top of a Supertrend trigger. Instead of treating every Supertrend flip as an equal trade opportunity, it classifies each buy signal by quality using trend-strength analysis (XTL), higher-timeframe confirmation, and a transparent rule-based priority score. It is designed primarily for intraday swing timeframes (e.g., 2H) with 4H confirmation and an optional Daily veto.
How it works
1. Base trigger — Supertrend
The entry engine is the classic ATR-based Supertrend (default ATR 14, multiplier 2.0). A buy setup appears when the trend flips from bearish to bullish; a sell setup appears on the opposite flip.
2. Signal grading — XTL (eXpert Trend Locator)
XTL is based on Tom Joseph's statistical concept for separating directional moves from random market noise, implemented here via a Double-CCI-style calculation with a selectable moving-average engine (28 MA types, default VWMA-26 on HLC3) and a fixed threshold (default 37).
XTL above the threshold = BULL environment
XTL below the negative threshold = BEAR environment
Otherwise = NEUTRAL
Optional bar coloring paints candles by XTL state (bull / neutral / bear).
3. Multi-timeframe confirmation (anti-repaint)
4H confirmation: close above the 4H EMA-21, EMA slope flat or rising, plus an optional RSI(14) momentum check (RSI > 50 or rising).
Daily veto (optional): if the Daily close is below its EMA-21 AND the EMA slope is down (strong downtrend), all buy signals are blocked. Blocked signals are still shown on the chart as an orange × for transparency.
By default only closed higher-timeframe bars are used (`lookahead_off` + confirmed-bar indexing), so MTF confirmation does not repaint. This can be disabled for faster (but mutable) live-bar confirmation.
4. Signal classes
STRONG BUY — Supertrend flip + XTL BULL + 4H confirmation (lime label)
BUY — Supertrend flip without full confirmation (green label)
SELL — Supertrend flip down, only fired if a valid buy occurred first (simple position tracking, so sells are not orphaned)
Filtered/blocked raw signals are plotted as gray circles or orange × marks so you can always see what was suppressed and why.
5. Optional EMA-89 filter
Buy signals can additionally be required to close above EMA-89 (with an adjustable % tolerance). Off by default.
6. Priority score (0–100)
Each signal gets a transparent, rule-based score from RSI, MFI, relative volume, EMA ribbon alignment (5/8/13/34/55/89/200), Parabolic SAR position and CMF. This is a simple checklist score — it is NOT a statistical probability.
7. Alerts & webhook automation
Standard `alertcondition()` alerts for Strong Buy / Buy / Sell / trend change.
A structured JSON alert (via `alert()`) designed for webhook automation (e.g., Make.com / n8n): symbol, timeframe, price, ATR-based Target-1/Target-2, Supertrend stop, R:R ratio, priority score, XTL state, 4H/Daily MTF status, RSI/MFI/CMF, relative volume, EMA support/resistance map, and flags such as "volume spike" (relative volume ≥ 3×) and "strong money inflow" (CMF ≥ 0.15).
Optional early intrabar alert: fires before bar close once a configurable percentage of the bar has elapsed (default 60%), clearly tagged `early_mode=1`. Early alerts can be invalidated before the bar closes (repaint risk is explicitly flagged); the confirmed bar-close alert is always sent separately.
Settings overview
Supertrend: ATR period, multiplier, source, ATR method
XTL: length, MA type (28 options), source, threshold, traditional/modern CCI formula
MTF: confirmation timeframe (default 4H), veto timeframe (default 1D), EMA length, slope lookback, momentum check, closed-bar mode
EMA-89 filter, EMA ribbon display, Parabolic SAR display
Targets: ATR multiples for Target-1 / Target-2 (used in alert messages)
Oscillators/volume lengths and attention thresholds (used in alert messages)
Early-signal toggle and minimum bar progress
Repainting notes
Confirmed signals are evaluated on bar close.
MTF data uses `lookahead_off` and, by default, the last closed higher-timeframe bar, so confirmation status does not change retroactively (at the cost of up to one higher-timeframe bar of delay).
The optional early intrabar alert is intentionally repainting by nature and is clearly labeled as a pre-warning; the final confirmation is always sent at bar close.
Credits
XTL (eXpert Trend Locator) concept by Tom Joseph — a statistical market evaluation distinguishing directional trends from random noise.
XTL implementation adapted from the public "Double CCI" approach on TradingView.
Supertrend logic based on the widely used ATR-based community implementation.
Moving-average library includes public implementations credited in-code to @everget (JMA), @DonovanWall (FRAMA, COVWMA), @allanster (VAMA), @RedKTrader (RSS_WMA), @Duyck (ADX MA) and @glaz (RSI EMA).
Disclaimer
This indicator is for educational and informational purposes only. It is not financial advice and past signal behavior does not guarantee future results. Always do your own research and manage risk appropriately. אינדיקטור
אינדיקטור
