Hỗ trợ và kháng cự

Prop Key Levels & Order Blocks - Buy Sell Signals with TP/SL A complete intraday trading suite built around one idea: the decision candle. Instead of guessing where price might turn, the script marks the exact candles where the market already made a decision, and then tells you what happened when price came back to them. Everything is evaluated on closed bars. Printed signals never move. ━━ WHAT IT DRAWS ━━ MAJOR KEY DETECTION The origin candle of an impulsive displacement leg. Its body becomes a level that extends to the right. Green for bullish decisions, red for bearish ones. When price closes clean through a key, the level is greyed out — it failed, and you can see that it failed. The detection level (1–100) sets how far price must travel out of a candidate before it is accepted, so you can go from "every small turn" to "only the moves that really expanded". MAJOR ORDER BLOCKS The last opposing candle before a structural break. Drawn as a box that survives until price closes through it. TREND DETECTION A volatility-scaled trailing line under price, green while bullish and red while bearish. It is the filter one of the two entry engines uses, and a weighted component of the other. ORDER POOL Price levels that were rejected repeatedly and still hold unfilled resting orders. Each pool is parked as an arrow at the right edge of the chart. You decide what happens once price trades through one: remove it (the orders are spent) or keep it dimmed, so you can still trade the reaction after the sweep. SMART FVGS Three-candle imbalances, filtered by a minimum size so the chart is not buried under meaningless micro-gaps. ━━ THE ENTRY ENGINE ━━ Two independent algorithms, selectable in the settings. PROP MODE — conservative. A signal needs the trend filter, a key level or order block, and a confirmation candle to agree, and price must not already be extended. Fewer trades, built for accounts where a handful of clean entries beats constant activity. AI-MODE — adaptive. Trend, momentum, key level, order block, pool sweep, fair value gap and candle quality each contribute a weighted score. The engine fires when the combined score clears a threshold you control, so it also takes the reversals the conservative mode filters away. Every entry comes with three take profits (Minor, Major, Highest) and a stop. All four are expressed in volatility units — one unit is the ATR at the signal bar — so the distances breathe with the market instead of being a fixed point value that is wrong on half the days. The reward box, the risk box and the projection line are drawn forward from the entry, so one glance tells you whether the trade is worth taking. Hover any signal badge to read why it fired and every price it produced. ━━ COOLDOWN ━━ After a signal, the engine mutes itself for a configurable number of bars. This is what stops it from firing ten entries into the same move — the single fastest way to run into a daily loss limit. ━━ DASHBOARDS ━━ A trade metrics table in the corner lists the live entry, all three targets, the stop, the reward-to-risk and the cooldown state — the numbers you copy into your order ticket. A cockpit panel shows the live checklist (trend, key level, order block, pool sweep, candle, cooldown), the running position, and a hit count across the whole loaded history: how often each target was reached and how often the stop came first. ━━ ALERTS ━━ Entry, take-profit hit and stop hit, as readable text or as a JSON object carrying side, entry, all three targets, the stop and the reward-to-risk — the format execution bridges expect. ━━ SETTINGS ━━ ① Engine Control — strategy type, score threshold, cooldown, metrics table ② Trade Config — Minor / Major / Highest TP, SL, volatility unit ③ Insight Matrix — key detection and its level, order blocks, trend ④ Orderflow & Smart FVGs — order pool, touch count, tolerance, fill handling ⑤ Visuals — theme, candle colouring, boxes, price lines, panel, drawing budget ⑥ Alerts — what to fire and in which format Every input carries a tooltip explaining what it does and what changes when you move it. ━━ NOTES ━━ Designed for intraday work on index CFDs, gold and FX. The defaults were set up on 1- to 15-minute charts; on higher timeframes raise the cooldown and the key detection level. This is an analysis tool, not financial advice. Past behaviour of any level or signal says nothing about future results. Test any configuration on your own instrument and timeframe before trading it.

Chỉ báo

của Traderlifestyle2026

Continuation Order Block Lite [EmpArchitect] █ OVERVIEW Continuation Order Block Lite maps bullish and bearish order-block zones that form only after a defined continuation-structure sequence. Many order-block tools identify an opposing candle and plot a zone without showing the structural sequence that made the zone relevant. This script separates the sequence from the zone: • CHoCH establishes a possible change in structural direction • BUILD BOS advances the continuation sequence • CONT BOS confirms or extends the selected continuation model • A qualifying continuation order block is then mapped • The zone is tracked through interaction, invalidation, expiry, or supersession It is an analytics-only structure tool. It does not provide entries, stop losses, targets, position sizing, risk/reward, probability scores, performance claims, or trade signals. █ WHAT IT MAPS Bullish continuation zone: A full-candle zone taken from the most recent bearish structure-timeframe candle before a qualifying bullish continuation break. Bearish continuation zone: A full-candle zone taken from the most recent bullish structure-timeframe candle before a qualifying bearish continuation break. The script tracks one current active continuation zone. Older zones may remain visible as inactive historical boxes. █ CONTINUATION MODELS Model B — CHoCH + first BOS: The structural direction changes through CHoCH. The first same-direction BOS completes the continuation sequence. Model A — CHoCH + two BOS: The structural direction changes through CHoCH. The first BOS builds the sequence. The second same-direction BOS completes the stricter continuation sequence. The model changes the number of confirmed structural breaks required before the structure state becomes ready. █ HOW THE STRUCTURE SEQUENCE WORKS The script uses confirmed pivots from the selected structure timeframe. A pivot high or pivot low becomes available only after the selected left-side and right-side confirmation bars have completed. A close beyond the latest live swing level creates a structural break: • CHoCH — the break changes the current structural direction • BUILD BOS — the break continues the new direction but has not yet completed the selected model • CONT BOS — the break completes or extends the selected continuation sequence The script uses the most recently confirmed internal pivot. A newer confirmed pivot can replace an older unbroken pivot. Equal highs and equal lows are not accepted as pivots because the comparison is strict. █ ORDER-BLOCK ORIGIN After a qualifying continuation break, the script searches backward through completed structure bars. For a bullish continuation zone, it selects the most recent bearish candle. For a bearish continuation zone, it selects the most recent bullish candle. The complete candle high-to-low range is used. The zone is not reduced to the candle body. The search is limited by the Origin search window setting. The zone begins when the continuation condition is confirmed. It is not back-projected as though it had already been known on the original candle. █ DISPLACEMENT AND FVG QUALIFICATION A candidate zone must pass the selected displacement / imbalance rule. Displacement is measured against ATR from the structure timeframe. Immediate FVG refers to a three-candle imbalance anchored at the selected origin candle. When “Require both displacement and immediate FVG” is OFF: • Displacement OR immediate FVG can qualify the zone When it is ON: • Displacement AND immediate FVG are both required The dashboard displays the active rule and ATR multiplier. █ VISUAL LANGUAGE The structure sequence uses different line styles so the events are not presented as equivalent. CHoCH: • Dashed line • Muted directional colour • Context transition only BUILD BOS: • Dotted line • Muted label • Sequence is still below the selected confirmation threshold CONT BOS: • Solid line • Stronger directional colour • Thicker line at the break that completes the selected continuation model Bullish structure and zones use green. Bearish structure and zones use orange. Active zones use stronger solid styling. Inactive historical zones retain their bullish or bearish colour with a faded fill and dotted outline. █ ZONE LIFECYCLE The script tracks the zone separately from the structural break that created it. An active zone can be: • Fresh • Touched • Gap-through • Structurally invalidated • Expired by maximum age • Superseded by a newer same-side continuation zone First interaction: A zone is marked as touched when price first reaches the zone and overlaps its range. Gap-through: A gap-through event is recorded when the first interaction bar moves completely beyond the zone without overlapping it. Structure invalidation: • Bullish zone — a completed structure-timeframe close below the zone bottom • Bearish zone — a completed structure-timeframe close above the zone top Age expiry: The zone becomes inactive after exceeding the selected maximum number of completed structure bars. Supersession: A newer qualifying same-side continuation zone replaces the currently active zone. A touch does not automatically delete the zone. █ TIMEFRAME MODES Auto mode: • Charts up to and including 4H use 4H structure • Charts above 4H through 1D use 1D structure • Charts above 1D through 1W use 1W structure • Charts above 1W use 1M structure Examples: • 15m chart → 4H structure • 1H chart → 4H structure • 4H chart = 4H structure • 1D chart = 1D structure Manual mode: Select a structure timeframe equal to or higher than the chart timeframe. Examples: • 1H chart → 4H structure • 4H chart → 1D structure • 1D chart → 1W structure A structure timeframe below the chart timeframe is rejected. Same-timeframe mode processes the prior completed chart bar directly. Higher-timeframe mode processes the prior confirmed structure bar when a new structure bar begins. █ STATUS PANEL The panel shows the current continuation state: • Chart timeframe and structure timeframe • Auto or Manual mode • Same-timeframe or higher-timeframe view • Selected continuation model • Current sequence progress • Most recent structural break • Active bullish-zone state, age, and range • Active bearish-zone state, age, and range • Most recent zone lifecycle event • Current displacement / FVG qualification • Structure-data readiness The panel describes the current state. It does not recommend an action. █ ALERTS Included structure-context events: • New bullish or bearish continuation zone • Bullish or bearish zone interaction • Bullish or bearish gap-through • Zone deactivation Zone-deactivation messages include the reason: • Structure reversal • Structure invalidation • Age • Superseded These are structure-event alerts only. They are not trade signals. █ WORKED EXAMPLE Example: 1H chart with 4H structure and Model B. 1. A confirmed 4H close breaks the latest opposite-side swing and creates CHoCH. 2. A later confirmed 4H close breaks the next same-direction swing. 3. That break is displayed as CONT BOS because Model B requires CHoCH plus the first BOS. 4. The script searches backward for the most recent opposing 4H candle. 5. The full high-to-low range of that candle becomes the candidate continuation zone. 6. The candidate appears only if the displacement / immediate-FVG rule passes. 7. A touch changes the zone from fresh to touched but does not deactivate it. The zone remains active until structure reversal, structure invalidation, age expiry, or supersession. The sequence establishes why the zone was mapped. It does not establish that price will return to the zone or that the zone will hold. █ HOW IT DIFFERS FROM SMC STRUCTURE ENGINE SMC Structure Engine is a broader chart-structure tool. It maps general CHoCH and BOS events, multiple order blocks, liquidity sweeps, break strength, zone scoring, touch counts, and broader regime context. Continuation Order Block Lite is narrower by design. It focuses on: • A selected structure timeframe • A defined CHoCH-to-BOS continuation sequence • A continuation-specific origin candle • Displacement / immediate-FVG qualification • One current active continuation zone, with older zones retained as inactive history • A compact continuation-zone lifecycle The two scripts answer different questions. SMC Structure Engine asks: What is the broader structure and order-block context on this chart? Continuation Order Block Lite asks: Did a defined continuation sequence complete, and what happened to the resulting origin zone? █ SETTINGS Model settings: • Structure timeframe mode • Manual structure timeframe • Trend-state model • Pivot left bars • Pivot right bars • Origin search window • Displacement threshold • Require both displacement and immediate FVG • Maximum zone age Display settings: • Show zone boxes • Show continuation sequence • Show structure swing levels • Show status panel █ IMPORTANT LIMITATIONS • Confirmed pivots introduce delay. • Structural breaks use completed closes, not intrabar assumptions. • A valid continuation sequence does not prove that continuation will persist. • A mapped zone does not imply that price will return. • A zone interaction does not imply that the zone will hold. • The script keeps only one current active continuation zone. • A newer same-side zone supersedes the previous active zone. • Zones use the full candle range, not the body. • Equal highs and equal lows are excluded by the strict pivot definition. • The script does not evaluate volume, liquidity sweeps, session quality, macro events, or market regime outside the defined sequence. • Results depend on pivot settings, origin lookback, ATR threshold, FVG requirement, market, and timeframe. • Same-timeframe and higher-timeframe views can show different structural granularity. • Lower-liquidity or highly irregular markets may produce noisier structure. █ NOTES • Pine Script v6 • Public and open-source • Built by EmpArchitect • Analytics-only structure tool • Designed for chart review and structural inspection • Not a signal service • No entries, exits, stop losses, targets, or performance claims █ CORE IDEA Continuation Order Block Lite does not treat every opposing candle as an order block. It first requires a defined continuation sequence. It then maps the origin zone and records what happened to it. Structure observations, not signals.

Chỉ báo

của EmpArchitect

Liquidity Sweep Reversal | M. Bedaiwi Liquidity Sweep Reversal | M. Bedaiwi Overview Liquidity Sweep Reversal is a price-action indicator designed to identify potential market reversals following liquidity sweeps above previous highs or below previous lows. The indicator monitors a higher-period liquidity range. When price moves beyond one side of that range, it waits for a subsequent Market Structure Shift (MSS) before generating a potential Buy or Sell signal. A liquidity sweep alone does not generate an entry. Market structure confirmation is an essential part of the setup. How It Works • A sweep below the previous liquidity low prepares a potential long setup. • A sweep above the previous liquidity high prepares a potential short setup. • Entry confirmation is based on a Market Structure Shift using the selected MSS Swing Length. • Liquidity sweeps can be detected using candle wicks or closing prices. • Classic and Adaptive entry methods are available. • If the selected Higher Timeframe is equal to or lower than the chart timeframe, the indicator automatically uses a reference period equivalent to four chart bars. The indicator calculates a rolling liquidity range on the current chart equivalent to the selected reference period. It does not request independent higher-timeframe candles through `request.security()`. Features • Liquidity sweep detection • Market structure confirmation • Potential long and short signals • Classic and Adaptive entry methods • Higher-timeframe safety handling • Automatic four-bar fallback • Fixed or ATR-based TP/SL levels • Entry, take-profit and stop-loss alerts • Optional liquidity zones and sweep markers • Historical performance dashboard • Pine Script v6 compatibility How to Use 1. Select the Chart Timeframe Choose the chart timeframe according to your trading style: • 5–15 minutes: Intraday trading • 1–4 hours: Short-term or swing trading • Daily: Medium-term trading Standard candlestick charts are recommended. 2. Select the Higher Timeframe The Higher Timeframe setting defines the reference period used to calculate liquidity highs and lows. Suggested combinations: • 5-minute chart → 30 or 60 minutes • 15-minute chart → 60 or 240 minutes • 1-hour chart → 4 hours • 4-hour chart → Daily • Daily chart → Weekly The selected Higher Timeframe should normally be higher than the chart timeframe. If it is equal to or lower than the chart timeframe, the indicator automatically uses a period equivalent to four chart bars. The liquidity label displays “Auto x4” when this fallback is active. 3. Configure Liquidity Sweep Detection Breakout Method provides two options: Wick Detects a sweep when the candle wick crosses the liquidity level. • Earlier detection • More frequent signals • Greater sensitivity to temporary price spikes Close Requires the candle to close beyond the liquidity level. • Stronger confirmation • Fewer signals • Filters some wick-only sweeps 4. Configure Market Structure Confirmation MSS Swing Length controls the number of candles used to calculate the swing high and swing low for Market Structure Shift confirmation. • Lower values generate faster and more frequent signals. • Higher values generate slower and more selective signals. The default value is 10. A range between 5 and 15 may be used as a starting point, depending on the asset and timeframe. 5. Select the Entry Method Classic Uses the traditional reversal approach: • A sweep below the previous liquidity low prepares a potential long setup. • A sweep above the previous liquidity high prepares a potential short setup. Classic mode is generally easier to understand and evaluate. Adaptive Uses the indicator’s internal historical behavior to adjust the potential trade direction. Depending on its internal long and short performance counters, Adaptive mode may occasionally select a continuation direction instead of the traditional reversal direction. Adaptive mode is experimental, and its behavior may vary between assets and timeframes. 6. Interpret the Signals Potential Long Setup • Price sweeps below the previous liquidity low. • The indicator detects a bullish Market Structure Shift on a later candle. • A Buy label appears after confirmation. • Entry, take-profit and stop-loss levels are calculated. Potential Short Setup • Price sweeps above the previous liquidity high. • The indicator detects a bearish Market Structure Shift on a later candle. • A Sell label appears after confirmation. • Entry, take-profit and stop-loss levels are calculated. Liquidity sweep markers show where price crossed a previous liquidity level. Do not enter solely because a sweep marker appears. Wait for the subsequent structure confirmation and Buy or Sell label. 7. Configure Take Profit and Stop Loss The indicator provides two TP/SL calculation methods: Dynamic Method Uses: • A five-bar ATR • The selected Risk setting • The MSS swing high or low • An internal reward-to-risk multiplier of approximately 0.9 For long trades, the stop-loss is placed below the MSS swing low with an additional ATR-based distance. The target is calculated above the entry using the entry-to-stop distance. For short trades, the stop-loss is placed above the MSS swing high with an additional ATR-based distance. The target is calculated below the entry using the entry-to-stop distance. Fixed Method Uses user-defined percentages from the entry price. Default values: • Take Profit: 0.3% • Stop Loss: 0.4% These values should be adjusted according to the asset’s volatility and the selected timeframe. Risk Setting The Risk setting controls the ATR multiplier used to determine the Dynamic stop-loss distance: • Highest: 10 • High: 6.5 • Normal: 5.5 • Low: 3.5 • Lowest: 1.15 This setting controls the distance of the stop-loss. It does not calculate position size or the monetary amount at risk. A wider stop-loss should normally be combined with a smaller position size. 8. Select the TP/SL Layout Default Displays dashed lines with TP and SL labels. Alternative Displays take-profit and stop-loss areas as colored boxes. This setting changes only the visual layout and does not change the calculated prices. 9. Enable Visual Elements • Show Liquidity Zones: Displays the reference liquidity areas. • Liq Grabs: Displays detected liquidity sweep markers. • TP / SL: Displays entry, take-profit and stop-loss levels. • Buy and Sell Colors: Controls the signal and zone colors. • Text Color: Controls the color of labels and displayed values. 10. Create Alerts Alerts are available for: • Buy Signal • Sell Signal • Take-Profit Signal • Stop-Loss Signal To create an alert: 1. Open TradingView’s alert menu. 2. Select Liquidity Sweep Reversal. 3. Choose the required alert condition. 4. Select the notification method. 5. Consider using “Once Per Bar Close” to reduce intrabar signals. 6. Apply Practical Confirmation For more selective setups, consider confirming signals with: • Higher-timeframe trend direction • Support and resistance levels • Trading volume • Market session and available liquidity • Supply and demand zones • Candle-close confirmation Always review the displayed entry, target and stop-loss levels before taking a trade. Calculate position size independently according to the stop-loss distance. Example Starting Configuration For a 15-minute chart: • Higher Timeframe: 60 minutes • MSS Swing Length: 10 • Breakout Method: Close • Entry Method: Classic • TP / SL Method: Dynamic • Risk: Low These settings are only a starting point and are not universally optimal. Historical Dashboard The Liquidity Sweep Backtest dashboard displays: • Total Entries • Wins • Losses • Win Rate • Average Profit • Total Profit The dashboard is intended for approximate comparison between settings. The script is an indicator, not a strategy, and the dashboard is not equivalent to TradingView’s Strategy Tester. The calculations do not include: • Brokerage commissions • Slippage • Bid-ask spread • Position sizing • Price gaps • Actual order execution • Taxes or financing costs Historical results do not guarantee future performance. Practical Limitations The indicator may be less effective during: • Strong one-directional trends • Low-liquidity market conditions • Major news releases • Large price gaps • Narrow or random consolidation • Highly volatile intrabar movement • Non-standard chart types • Poorly matched timeframe settings The indicator processes approximately the most recent 4,900 bars to maintain performance. Results may change when the symbol, timeframe or settings are changed. Attribution and Modifications Original open-source code by fluxchart. Modified by Mohammed Bedaiwi (mbedaiwi2). Modifications include: • Conversion to Pine Script v6 • Safer higher-timeframe handling • Automatic four-bar fallback when the selected timeframe is not higher than the chart timeframe • Dashboard calculation safeguards • Independent indicator naming and presentation The modified source code remains available under the Mozilla Public License 2.0. Important Notice This indicator is provided for educational and analytical purposes only. It does not constitute financial advice, an investment recommendation or a guarantee of profitable results. Trading and investing involve substantial risk. Users should perform independent analysis, apply appropriate position sizing and risk management, and avoid risking funds they cannot afford to lose. ──────────────────────────── الوصف العربي نظرة عامة مؤشر Liquidity Sweep Reversal هو مؤشر لتحليل حركة السعر، صُمم لاكتشاف فرص الانعكاس المحتملة بعد سحب السيولة أعلى القمم السابقة أو أسفل القيعان السابقة. يراقب المؤشر نطاقًا مرجعيًا للسيولة. عندما يتحرك السعر خارج أحد طرفي هذا النطاق، ينتظر المؤشر تغيرًا لاحقًا في هيكل السوق قبل إصدار إشارة شراء أو بيع محتملة. لا يؤدي سحب السيولة وحده إلى إصدار إشارة دخول، بل يجب ظهور تأكيد لاحق من هيكل السوق. طريقة العمل • سحب السيولة أسفل القاع السابق يجهز فرصة شراء محتملة. • سحب السيولة أعلى القمة السابقة يجهز فرصة بيع محتملة. • يتم تأكيد الدخول بواسطة تغير هيكل السوق وفق إعداد MSS Swing Length. • يمكن اكتشاف سحب السيولة بواسطة ظلال الشموع أو أسعار الإغلاق. • يتوفر أسلوبا دخول Classic وAdaptive. • إذا كان الإطار المرجعي مساويًا أو أقل من إطار الرسم، يستخدم المؤشر تلقائيًا فترة تعادل أربع شمعات. الميزات • اكتشاف سحب السيولة • تأكيد تغير هيكل السوق • إشارات شراء وبيع محتملة • أسلوبا دخول Classic وAdaptive • معالجة آمنة للإطار الزمني • أهداف ووقف خسارة ثابتة أو مبنية على ATR • تنبيهات الشراء والبيع والهدف ووقف الخسارة • مناطق سيولة وعلامات سحب اختيارية • لوحة نتائج تاريخية • التوافق مع Pine Script v6 طريقة الاستخدام 1. اختر إطار الرسم • 5–15 دقيقة: للتداول اليومي • ساعة إلى 4 ساعات: للتداول قصير أو متوسط الأجل • يومي: للتداول متوسط الأجل يفضل استخدام رسم الشموع العادي. 2. اختر الإطار المرجعي الأعلى إعدادات مقترحة: • رسم 5 دقائق ← 30 أو 60 دقيقة • رسم 15 دقيقة ← 60 أو 240 دقيقة • رسم ساعة ← 4 ساعات • رسم 4 ساعات ← يومي • رسم يومي ← أسبوعي إذا كان الإطار المختار مساويًا أو أقل من إطار الرسم، يستخدم المؤشر فترة تلقائية تعادل أربع شمعات، وتظهر عبارة `Auto x4`. 3. اختر طريقة اكتشاف سحب السيولة Wick يعتمد على اختراق ظل الشمعة: • اكتشاف أسرع • إشارات أكثر • حساسية أعلى للحركات اللحظية Close يشترط إغلاق الشمعة بعد مستوى السيولة: • تأكيد أقوى • إشارات أقل • تصفية بعض اختراقات الظلال 4. اضبط MSS Swing Length يحدد عدد الشمعات المستخدمة لتأكيد تغير هيكل السوق. • القيمة المنخفضة تعطي إشارات أسرع وأكثر عددًا. • القيمة المرتفعة تعطي إشارات أقل وأكثر انتقائية. القيمة الافتراضية هي 10، ويمكن البدء بنطاق بين 5 و15. 5. اختر أسلوب الدخول Classic • سحب سيولة القاع يؤدي إلى البحث عن شراء. • سحب سيولة القمة يؤدي إلى البحث عن بيع. Adaptive يستخدم السلوك التاريخي الداخلي للمؤشر لتعديل اتجاه الصفقة المحتمل، وقد يختار أحيانًا اتجاهًا استمراريًا بدل الانعكاس التقليدي. يفضل البدء بوضع Classic لأنه أسهل في الفهم والتقييم. 6. قراءة الإشارات إشارة شراء محتملة: • يسحب السعر السيولة أسفل القاع السابق. • يظهر تغير صاعد في هيكل السوق على شمعة لاحقة. • تظهر علامة Buy. • يتم حساب الدخول والهدف ووقف الخسارة. إشارة بيع محتملة: • يسحب السعر السيولة أعلى القمة السابقة. • يظهر تغير هابط في هيكل السوق على شمعة لاحقة. • تظهر علامة Sell. • يتم حساب الدخول والهدف ووقف الخسارة. لا تدخل اعتمادًا على علامة سحب السيولة وحدها، بل انتظر تأكيد هيكل السوق وظهور Buy أو Sell. 7. إعداد الهدف ووقف الخسارة Dynamic يستخدم: • ATR بطول خمس شمعات • مستوى Risk المختار • قمة أو قاع MSS • نسبة عائد إلى مخاطرة داخلية تقارب 0.9 Fixed يستخدم نسبًا ثابتة من سعر الدخول. القيم الافتراضية: • الهدف: 0.3% • وقف الخسارة: 0.4% يجب تعديل هذه القيم وفق تذبذب الأصل والإطار الزمني. إعداد Risk يتحكم في المسافة بين الدخول ووقف الخسارة، ولا يحسب حجم الصفقة أو المبلغ المالي المعرض للخسارة. 8. العناصر المرئية • Show Liquidity Zones: إظهار مناطق السيولة • Liq Grabs: إظهار علامات سحب السيولة • TP / SL: إظهار الدخول والهدف ووقف الخسارة • Default Layout: عرض المستويات على شكل خطوط • Alternative Layout: عرض المستويات على شكل مناطق ملونة 9. التنبيهات يدعم المؤشر تنبيهات: • الشراء • البيع • الوصول إلى الهدف • الوصول إلى وقف الخسارة يفضل ضبط التنبيه على مرة واحدة عند إغلاق الشمعة لتقليل الإشارات اللحظية. 10. التأكيد العملي يمكن تحسين انتقائية الإشارات باستخدام: • اتجاه الإطار الزمني الأعلى • الدعم والمقاومة • حجم التداول • جلسة السوق والسيولة • مناطق العرض والطلب • تأكيد إغلاق الشمعة يجب مراجعة الهدف ووقف الخسارة وحساب حجم الصفقة بصورة مستقلة قبل الدخول. لوحة النتائج التاريخية تعرض لوحة Liquidity Sweep Backtest: • إجمالي الصفقات • الصفقات الرابحة • الصفقات الخاسرة • نسبة النجاح • متوسط النتيجة • إجمالي النتيجة اللوحة مخصصة للمقارنة التقريبية بين الإعدادات. السكريبت مؤشر وليس استراتيجية، ولذلك لا تعادل اللوحة Strategy Tester في TradingView. لا تتضمن النتائج العمولات أو الانزلاق السعري أو فرق العرض والطلب أو حجم الصفقة أو إمكانية التنفيذ الفعلي. حقوق الكود والتعديلات الكود الأصلي مفتوح المصدر من تطوير fluxchart. تم تعديله بواسطة Mohammed Bedaiwi (mbedaiwi2). تشمل التعديلات: • التحويل إلى Pine Script v6 • تحسين معالجة الإطار الزمني • استخدام فترة تلقائية تعادل أربع شمعات عند الحاجة • حماية حسابات لوحة النتائج • تغيير اسم وهوية المؤشر بصورة مستقلة يظل الكود المعدل خاضعًا لترخيص Mozilla Public License 2.0. إخلاء المسؤولية هذا المؤشر أداة تعليمية وتحليلية فقط، ولا يمثل توصية مالية أو ضمانًا للربح. ينطوي التداول والاستثمار على مخاطر. يجب على المستخدم إجراء تحليله المستقل، واستخدام حجم صفقة مناسب، وتطبيق إدارة المخاطر وعدم المخاطرة بأموال لا يستطيع تحمل خسارتها.

Chỉ báo

Zone Radar [DefinedEdge]Price spends most of its time going nowhere. Zone Radar finds those stretches automatically, draws the range while it's still forming, and tells you the moment it breaks and how hard. 🎯 What it does Zone Radar watches for price coiling inside a bounded range. When a genuine consolidation forms, it marks the zone with its support and resistance, then tracks it live. The instant price closes decisively outside the range, it flags the break and scores its strength from 0 to 100. Strong breaks get a bold label and a projected target. It is a context and breakout tool, not a signal service. It shows you where the market is compressed and when that compression releases. What you do with that read is yours. 🧭 How a zone is found A range only qualifies when two things are true at once: Price stays inside an ATR normalised band for a minimum number of bars, so the width adapts to any symbol or timeframe on its own. Price does not drift across that band from one side to the other, which filters out slow trends pretending to be ranges. Once a zone is confirmed the box breathes to hug the real range, but it is capped at the width it formed with. That cap is what makes a breakout meaningful: a close beyond it is a true expansion out of compression, not just another bar inside the noise. 💥 Break strength (0 to 100) Every break is graded on four things that separate a real breakout from a fake one: Displacement how far beyond the edge it closed, in ATR Range expansion the break bar's range against its recent average Volume surge participation on the break (auto adjusted on symbols with no volume data, like spot FX) Coil quality how long and tight the range was, since a longer coil breaks harder Breaks at or above your Strong threshold get the bold badge plus a measured move target: the height of the range projected from the breakout point. Broken edges stay on the chart as polarity support and resistance for the retest. ⚙️ Under The Hood Signals fire on the close of the breakout bar. No repainting, ever. Fully adjustable: range length, width, break sensitivity, strength threshold, and how much history stays on the chart. Works on any market and any timeframe. Tuned nicely for intraday out of the box. 🔔 Alerts Zone formed, break up, break down, strong break up, strong break down. Wire any of them into your workflow. 📝 Notes Lower timeframes produce far more zones than higher ones, so only the most recent are kept drawn to stay within platform limits. Raise the zone cap if you want more history, or drop to a higher timeframe for a cleaner chart. The ATR based settings are a starting point, not gospel. Tune them to how your instrument actually moves.

Chỉ báo

của DefinedEdge

Volume Nodes & Value Migration [MQLSoftware]Volume Nodes & Value Migration is an anchored volume profile engine that rebuilds the profile construction itself and then measures how price actually behaves around the profile's own structure: the Point of Control (POC), the Value Area (VAH / VAL), high-volume nodes (HVN) and low-volume nodes (LVN). Instead of a fixed number of rows filled by spreading each bar's volume uniformly, it derives the bin height from ATR at each window anchor, weights every bar's volume toward its close with a triangular kernel, recomputes the POC and Value Area on every confirmed bar so the migration of value is visible as a trail, arms the committed POC and high-volume nodes as trackable levels with an accepted / rejected state machine, and reports measured base rates for those events from the chart's own history. This is a visual analytical tool intended for chart reading and volume-structure mapping. It does not execute trades and does not provide financial advice. Key Features Anchored volume profiles (Day / Week / Month / Quarter, or Auto per chart timeframe) with bin height derived from ATR at the window anchor, so the bin count follows the window's range-to-ATR ratio instead of a fixed row number Close-weighted triangular distribution: each bar's volume is spread over its high-low span with the apex at the close, so the settled price carries more weight than the wick extremes Developing POC step-trail and Value Area band for the active window, recomputed on every confirmed bar; committed windows keep their final POC and Value Area lines so history stays clean, and consecutive windows are chained with dotted POC-to-POC links labelled with the migration distance in ATR and percent Committed POC and the strongest HVNs arm as horizontal levels and every return is tracked armed, then accepted (confirmed closes inside the node zone) or rejected (a probe through the node center that closes outside the zone) Thin Zones (LVN) of each committed window shaded as context — the low-volume gaps price historically transits rather than builds business in A statistics panel with the live window status, developing value, node states and measured base rates: how often price revisited the prior POC and how node retests resolved, each with its sample size Four confirmed-bar alerts: node accepted, node rejected, profile committed, prior POC revisited Core Concept TradingView already ships volume profile tools (Visible Range, Fixed Range, Session and periodic profiles), and most community profiles repeat the same construction: a fixed row count, each bar's volume spread uniformly across its high-low range, and a final static histogram left for the reader to interpret. This indicator rebuilds each of those stages and then closes the loop by measuring what price actually does at the profile's own levels. Five specific algorithmic elements: 1. Adaptive resolution. The bin height is derived from ATR at the window anchor (Coarse 0.50, Balanced 0.25, Fine 0.125 ATR per bin), so the number of bins follows the window's range-to-ATR ratio. A quiet range window and an expansion window get structurally comparable profiles on any symbol and timeframe, with no fixed row count and no per-market tuning. If a window's range outgrows the internal cap, bins merge 2:1 and the height doubles — resolution stays bounded by construction. 2. Close-weighted triangular distribution. Each bar's volume is distributed over its high-low span by a triangular kernel with its apex at the bar close: the weight a price bin receives is the integral of that kernel over the bin. For a bin inside a bar with low L, high H and close C, the weight is F(b) - F(a), where F(x) = (x - L)^2 / ((H - L)(C - L)) below the close and F(x) = 1 - (H - x)^2 / ((H - L)(H - C)) above it. The settled price therefore carries more weight than the wick extremes, which a uniform spread treats identically to the body. 3. Developing value area. POC, VAH and VAL are recomputed on every confirmed bar of the active window; the POC is drawn as a step trail and the Value Area as a developing band, so the reader sees value migrate through the window — POC ladders, value-area expansion and contraction — rather than only the final snapshot. Once a window commits, its trail retires and the final POC / VAH / VAL lines remain, so history stays readable. Committed windows are chained with dotted POC-to-POC links labelled with the migration distance in ATR units and percent. 4. Node acceptance state machine. When a window commits, its POC and the strongest HVNs (local peaks holding at least half of the POC volume) arm as horizontal levels. Every return is tracked on confirmed bars only: a retest is accepted after N consecutive confirmed closes inside the node zone (node center plus/minus half an ATR, never thinner than one bin), and rejected when a probe trades through the node center and closes outside the zone, or when a visit leaves the zone before N closes. A graze of the zone edge that neither trades the center nor closes inside resolves nothing. Resolutions are latched and marked on the chart; unresolved nodes expire when the next window commits. 5. Measured base rates. The panel reports observed frequencies from this chart's own loaded history: how often price traded back through the prior window's POC, how often POC retests resolved as accepted, and how often HVN retests were rejected — each with its sample size. Below a minimum sample the panel says "collecting" instead of quoting a percentage. Observed frequencies, not assumptions, and no claims attached to them. Anatomy of the Display The committed histogram is the final profile of each closed window, drawn from the window's start with bin brightness following volume share; the Value Area is shaded behind it. The POC row and line mark the single price bin that traded the most volume, labelled `POC · High Volume Node`; VAH and VAL are dashed lines labelled `VAH · Value Area High` and `VAL · Value Area Low`. The developing trail is a step line of the active window's POC with the developing Value Area shaded behind it, both recomputed on every confirmed bar and existing only for the window still forming. The dotted migration link connects the final POCs of consecutive windows and carries a label with the shift in ATR units and percent. Node lines extend right from each commit: the POC node in the bright POC color, HVNs in the profile color, each labelled by kind. When a retest resolves, the line recolors and a mark is printed: `✓ accepted` when price held the required confirmed closes inside the zone, `✕ rejected` when it was turned away. Expired (untested) nodes fade to dotted. Thin Zones are faint dashed boxes labelled `LVN · Thin Zone` over the committed window's low-volume gaps. They carry no state machine and no alerts — context only. The panel shows the window status (anchor period, bars, bins and bin height), the developing POC and Value Area, the POC migration versus the prior window, the state of each armed node, and the measured base rates with sample sizes. Notes on Repainting Volume accumulation, developing POC / VAH / VAL updates, node state transitions, base-rate counters and alerts run on confirmed bars only. A committed profile is final: it is built exclusively from the confirmed bars of a closed window and is never recalculated afterwards. Node resolutions are latched. An accepted or rejected mark cannot un-happen if price later trades back through the level. The live developing histogram, POC trail and Value Area band of the current window redraw as the window grows — they are explicitly visual context for the forming profile, not signals. The script requests no higher-timeframe data at all (no `request.security` calls); window anchors are detected with `timeframe.change` in the chart context. Alerts are gated by confirmed-bar events and fire once per closed bar, never intra-bar. Typical Analysis Workflow A common analytical workflow may include: Reading the committed profile for the prior window: where the POC sits, how wide the Value Area is, and where the Thin Zones are Watching the developing POC trail of the active window — a POC laddering in one direction reads as value migrating, a static POC as value building in place Comparing the migration link and the panel's MIGRATION row to see how far value shifted between windows in ATR terms Waiting for price to return to an armed node and letting the state machine resolve the retest into accepted or rejected on confirmed bars Consulting the measured base rates to see how often such revisits and retests actually occurred on this chart's history, then combining the read with other forms of analysis and risk management Configuration Anchor Period - the window each profile covers (Auto, Day, Week, Month, Quarter); Auto follows the chart timeframe and a pick at or below it escalates automatically. Committed Profiles to Keep - how many closed windows keep their histogram drawn; statistics always use the full loaded history. Profile Detail - target resolution (Coarse / Balanced / Fine), expressed as ATR per bin, never a bin count. ATR Length - the ATR lookback used for bin height and migration distances. Value Area % - the share of window volume the Value Area encloses. Track POC / HVN as Nodes - arms committed levels for the accepted / rejected state machine. Acceptance Closes - confirmed closes inside the node zone required for an accepted resolution. HVN Nodes per Window - how many high-volume nodes arm besides the POC. Thin Zones (LVN) - shades the committed window's low-volume gaps. Resolved Marks to Keep - how many resolved node marks stay drawn on the chart; the measured statistics are unaffected. Rendering - committed profiles, live developing profile, profile width, the active window's POC trail and Value Area band, migration links, glow, and the four palette colors. Statistics Panel - visibility, corner and text size. Markets and Timeframes The indicator can be applied across multiple markets and timeframes: Forex Stocks and Indices Commodities Cryptocurrencies Because the bin height, node zones and migration distances are all ATR-based, the visual behavior stays consistent across instruments and timeframes. On symbols that supply no volume data the script weights every bar equally (a time-at-price read) and the panel states so explicitly. Alerts Node accepted - price printed the required confirmed closes inside an armed node zone Node rejected - an armed node turned the retest away (probe through the node center with a confirmed close outside the zone) Profile committed - an anchor window closed; its profile is final and its nodes are armed Prior POC revisited - price traded back through the previous window's Point of Control All alerts evaluate on confirmed bars to avoid intra-bar oscillation. A dynamic alert message naming the exact event(s) is also provided.

Chỉ báo

của MQLSoftware

Asian Range Liquidity Sweep - Kill Zone Reversal ASIAN RANGE LIQUIDITY SWEEP — the complete ICT Asian Range liquidity model in one indicator The Asia session builds a small, quiet range. London opens, runs the stops sitting above or below that range, and then walks the price the other way. That single move is one of the most repeatable things in FX, and this indicator is the full rule set for it: the range, the liquidity raid, the higher-timeframe point of interest that makes the raid tradeable, the entry, the stop, the targets — and, just as important, the days on which the raid will NOT happen. Everything is drawn in New York time, the way the model is defined. ━━━ WHAT IT DOES ━━━ ① ASIAN RANGE (20:00 – 00:00 New York) A time based range, not a structural one. The box, its high, its low and its 50 % are projected forward into the whole trading day. The high is buy side liquidity, the low is sell side liquidity. Direction is mechanical and never inverts: above the range this model only sells, below the range it only buys. ② HIGHER TIMEFRAME POI ENGINE — the filter that decides everything A raid of the Asian high on its own is, most of the time, a trap. The raid only becomes high probability when it lands inside a higher-timeframe point of interest. The indicator scans three timeframes at once (15m / 1h / 4h by default) for · Fair Value Gaps · Order Blocks · Breaker Blocks (a demand block that price closed through and that now acts as resistance) · Inverse Fair Value Gaps (a bullish gap that got closed through and flipped bearish) Every zone is anchored to the exact candles that built it, is extended while it is alive, and is dropped once it is used up or once it sits too far from the daily range to matter. On top of that, the higher-timeframe structure itself has to agree: bearish structure for shorts, bullish for longs. ③ LONDON KILL ZONE (02:00 – 05:00, optional 01:30 start) — Trade 1 Between those hours the indicator waits for price to raid the Asian high (or low) INTO one of those zones. A raid is not even accepted as valid until price has traded back into a fair value gap. Then it waits for a lower-timeframe confirmation and enters at a point of interest — never at market: · MSS + FVG — market structure shift, entry on the retracement into the gap · CISD — change in state of delivery, entry back at the CISD level itself · FVG tap — proximal edge on small gaps, 50 % on big ones · HIDDEN ORDER BLOCK — the opposite-colour candle trapped between two same-direction fair value gaps. The block almost nobody marks, and the sharpest entry in the whole model That list is a risk ladder: 1m MSS+FVG is the most aggressive and pays the most, 15m FVG is the safest, wins most often and pays the least. Pick the timeframe you actually want to trade and run the indicator there. Stop goes on the protective structure that belongs to the entry zone. Target 1 is always the opposite side of the Asian range. Target 2 extends to the next inducement swing — the draw for the day. ④ NEW YORK KILL ZONE (07:00 – 10:00) — Trade 2, the continuation When the London raid then breaks the OPPOSITE side of the Asian range with displacement, the London extreme is very likely the high or the low of the day. The indicator draws the optimal trade entry fibonacci over that impulse — 0.5 / 0.618 / 0.705 / 0.79 — and takes the continuation from the retracement into it, with the stop beyond 0.79 or 1.0. The setup is strongest when the origin zone was a 4h zone, because the whole day is then a 4h market-maker model running internal to external. If the draw on liquidity was already reached before New York opens, the day is flagged as low probability and skipped. ⑤ THE NO-SWEEP FILTERS — the part almost nobody explains Two situations mean the raid you are waiting for will never come: · HTF POI ALREADY TAPPED IN ASIA — price worked into the zone during the Asian session and then broke structure against the range. The Asian high is now protected. The indicator says so on the chart and points you at the fallbacks instead: the 50 % of the range, an internal range high (trend line liquidity), or a fair value gap built inside the Asian session. · STRONG HIGH / STRONG LOW INSIDE THE RANGE — a sweep immediately followed by a break of structure. That extreme is protected. What looks like equal highs later on is a rejection-block reversal, not a raid. Wait for the sweep and you miss the trade. ⑥ NEWS FILTER High-impact US news in the New York session turns London into a range or a one-way run with no reversal. Pine cannot read a news feed, so paste the dates and those days are skipped. ━━━ WHY EVERY SIGNAL EXPLAINS ITSELF ━━━ Hover any signal pill and you get the full reasoning, not a label: the range and its size, the exact price the liquidity was raided at, which point of interest it landed in, what the higher timeframe structure was doing, which confirmation fired, whether the raid was validated by a fair value gap, plus entry, stop, both targets, risk in pips, reward in pips and the R multiple. Setups that were found but rejected are explained too. A "NO TRADE" tag tells you the raid, the zone and the confirmation were all there but the reward did not pay for the stop — so you learn the filter instead of wondering why nothing fired. Every zone, every structure event, the range lines, the OTE levels and both education cards carry the same kind of tooltip. There is a HOW TO READ THIS card and an honest BEFORE YOU TRADE THIS card on the chart. ━━━ COCKPIT PANEL ━━━ Live session state, symbol, chart timeframe, higher-timeframe bias, the full Asian range with a PROTECTED / OPEN flag on each side, an eight-step checklist that fills in as the setup builds, the open position with stop and target, a large status line, a rough win / loss / break-even tracker and the timestamp of the last signal. ━━━ ALERTS AND AUTOMATION ━━━ Every event fires a clean JSON payload ready for a webhook — entry, stop, both targets, the range boundaries, the point of interest that produced the signal, symbol, exchange, timeframe, volume and an optional account field. Events: ENTRY, TP1, SL, BE, SWEEP, RANGE. Five plain-language alertconditions are included as well for anybody who just wants a notification. ━━━ SETTINGS WORTH KNOWING ━━━ · Sessions are fully configurable if your broker feed needs a different reference · Turn individual POI types and POI timeframes on and off · Choose one confirmation model or let it take the first valid trigger · Four stop modes, two-target management, break-even at a chosen R · Full chart theme with navy background, mint / red candles and session shading — or switch it off and keep your own ━━━ HONEST NOTES ━━━ This model is mechanical up to the trigger. Direction is fixed and never inverts, the windows are fixed, the filters are fixed — but the final judgement, is this really the high of the session, stays discretionary. Anybody telling you a setup is 100 % mechanical is selling you something. Expect zero to four setups a day across two pairs, roughly 20 pips average per trade, and losing days. Judge it weekly and monthly, never daily. The safest entry model fires rarely by design; the aggressive ones fire more and stop out more. The win / loss counter in the panel is a rough on-chart tracker that assumes a fill at the marked price and resolves target before stop within the same bar. It is not a backtest and it is not a performance claim. This indicator is a study tool. It is not financial advice. ━━━ CREDIT ━━━ The rule set follows the well-known ICT Asian-sweep model as it is taught publicly in the ICT community. The implementation, the point-of-interest engine, the no-sweep filters, the panel and the design are original work. Open source — read it, change it, learn from it. WHY THESE PARTS BELONG TOGETHER The session range, the higher-timeframe point of interest and the lower-timeframe confirmation form a single filter chain, and the model does not work with any link missing. The range supplies the liquidity pool that is going to be raided, the higher-timeframe zone decides whether that raid is a reversal or a trap, and the lower-timeframe trigger decides when. A raid without a zone is noise, a zone without a raid has nothing to react to, and both without a trigger have no entry.

Chỉ báo

của Traderlifestyle2026

Market Profile VPOC Breakout - Imbalance Signals A breakout setup does not fail because the setup is bad. It fails because it was taken in the wrong market phase. Roughly 70 % of the time price is INSIDE the higher-timeframe balance — inside fair value — and there a breakout has almost no edge. In the remaining ~30 %, when the market is OUT OF BALANCE, the identical trigger becomes one of the highest-probability trades there is. That combination shows up about ONCE PER DAY. Market Profile VPOC Breakout automates that location-first workflow end to end: weekly and daily volume/TPO profiles, the value areas, the VPOC sequence, the transferred prior-day value-area edge, single prints, the P / b micro-profile proof, the entry trigger, the risk model and ready-to-use webhook JSON — all on one chart, with an explanation attached to every single object. ═══════════════════════════════ THE 7 CONFIRMATIONS ═══════════════════════════════ The panel walks you through them live, top to bottom, and nothing below step 1 matters while the market is in balance. ① WEEKLY LOCATION — the previous week's value area is the equilibrium. Price inside it = the 70 % phase → stand down. Price above VAH or below VAL = imbalance → hunt. The shaded zone on the chart is that balance; the background wash tells you at a glance which phase you are in (mint = imbalance up, red = imbalance down, gold = balance). ② EQUILIBRIUM TEST + REJECTION — the week opened outside the balance, price came back to TEST the weekly value area and was aggressively traded away from it again. That rejection is the proof that the market no longer wants to be in equilibrium. ③ TREND OF EQUILIBRIUM — the sequence of daily VPOCs. Rising VPOCs mean fair value itself is migrating up: the distribution of the participants' equilibrium is trending, which is exactly what a fast trade WITH the trend needs. Flat or overlapping VPOCs = balance = no trade. Drawn as a staircase over the session VPOCs. ④ PRIOR-DAY VALUE AREA BREAK — the previous session's value-area edge is transferred onto the execution timeframe as a thick green line. Price has to ACCELERATE through it, not drift. ⑤ SINGLE PRINTS — the indicator reads the running session's TPO grid and counts price rows that only ONE bar ever touched. Those rows are marked as a cyan SINGLE PRINT zone: the market moved so fast that no business was done there = aggressive buyers or sellers, not passive rotation. ⑥ P / b MICRO SHAPE — the micro profile of impulse + the small balance that forms on it is measured. POC in the upper part = P (aggressive buyers shifting equilibrium up) → long. POC in the lower part = b (sellers shifting it down) → short. A symmetric D is skipped. This is the P/b/D profile-shape logic used by two-time World Cup Championship of Futures Trading winner Patrick Nill. ⑦ TRIGGER — two variants, both switchable: • BREAK-IN — price dips back into the P/b balance and is instantly bought / sold again (the aggressive, earlier entry, trend-continuing). • BREAKOUT — a CLOSE beyond the balance edge with a higher (long) or lower (short) close. Never a wick. ═══════════════════════════════ RISK MODEL ═══════════════════════════════ Stop behind the structural invalidation (micro-balance edge, impulse origin or the reference level) plus an ATR buffer. TP1 in R multiples moves the stop to break-even, TP2 lets the runner work. And the rule that keeps this model alive: a TIME STOP. If the move does not run within N bars, get out — a failing breakout reverses just as fast as it was supposed to run. Risk and reward are drawn as blocks so the geometry is readable at a glance. One signal per session by default, because the model only exists about once a day. ═══════════════════════════════ WHAT IS ON THE CHART ═══════════════════════════════ • Session volume/TPO profiles with value area, VPOC and shape letter (P / b / D) • Naked VPOC rays that keep running right as magnets • Weekly profile + the prior-week balance zone projected into the current week • The thick green transferred value-area edge with its own explanation • Daily VPOC staircase and the imbalance gauge in the panel • Single-print zones, micro-balance boxes with the big P / b letter • BUY / SELL pills, the full numbered reason stack printed next to the signal, entry / SL / TP1 / TP2 rails, risk and reward blocks, TP / SL / BE / TIME exit tags • A permanent BEGINNER CARD on the chart plus a HOW TO READ manual — every pill, zone, rail, letter and panel row also has its own hover explanation, so nothing on this chart is unexplained • Two colour modes: Design (navy, mint / cyan / gold) or Original TPO (the classic grey market-profile look with red VPOC rays and a white profile curve) ═══════════════════════════════ AUTOMATION ═══════════════════════════════ Create ONE alert with the condition "Any alert() function call" and paste your webhook URL. Every BUY, SELL, TP1_HIT, TP2_HIT, SL_HIT, BE_EXIT, TIME_STOP and ARMED event posts ready-to-use JSON containing id, symbol, action, setup, shape, qty, price, entry, sl, tp1, tp2, pdvah, pdval, timeframe and time — connect it to any bridge or bot without touching the code. Separate alertconditions for BUY, SELL and "any signal" are also available. ═══════════════════════════════ HOW TO USE IT ═══════════════════════════════ Built for an intraday execution timeframe: 1m to 15m, exactly like the original workflow (locate on the weekly and daily profiles, execute on a 1-minute chart). Index futures and index CFDs are the natural home (NQ, ES, DAX, Nikkei), but the profile engine derives its bin size from the average daily range, so gold, FX and crypto work out of the box. For index futures switch on "cash session only" and set the exchange session so the overnight trade does not smear the profiles. Every input is documented with a tooltip that explains what it does and why it exists. Start with the defaults, then loosen step 2 or step 3 if you want more signals — and be aware that every filter you switch off moves you back towards the 70 % phase where this trigger simply does not pay. ═══════════════════════════════ NOTES ═══════════════════════════════ The entry logic is mechanical and reproducible. Stop distances, targets and the time stop are parameters, not gospel: size them to the instrument you trade. Profiles are built from the bars of the chart you are on, so a finer timeframe gives a finer profile. Hit rates quoted in the educational material behind this model refer to the full workflow including discretionary session context — treat the signals as a structured, disciplined framework, not a guarantee, and always validate on your own data before risking capital. Open source. Feedback and improvement ideas are welcome. WHY THESE PARTS BELONG TOGETHER The point of control and the breakout trigger are combined because a breakout setup does not fail because the setup is bad, it fails because it was taken in the wrong market phase. The VPOC locates that phase: a break away from a freshly built point of control is a different trade from a break back into an old one. The imbalance measurement is the third piece - it tells you whether the move away from the VPOC was one-sided enough to be worth following.

Chỉ báo

của Traderlifestyle2026

Volume Profile P b D Shapes - Day Playbook VOLUME PROFILE P b D SHAPES reads the market's body language: every trading day the volume profile prints a LETTER — P, b or D — and that letter tells you who is in control and exactly how to trade the next session. This indicator automates the complete PbD method: it builds every day's volume profile, classifies the shape, draws the levels, prints the playbook on your chart and fires webhook-ready JSON signals. ■ THE THREE LETTERS P-SHAPE (bullish continuation) — fast impulse UP, then balance ON TOP. The thin tail below is single prints: nobody did business there. Buyers feel like winners, dips are for buying. b-SHAPE (bearish continuation) — fast impulse DOWN, then balance AT THE BOTTOM. The thin tail above marks the drop. Sellers are in control, rallies are for selling. D-SHAPE (balance day) — a symmetric bell curve with a fat POC in the middle. Buyers AND sellers are happy, fair price has been found. The next day usually stays range-bound: fade the edges. ■ THE AUTOMATED PLAYBOOK (7 SETUPS) P behind you: - PLAN A — CONTINUATION: price dips into yesterday's value area, the dip HOLDS (no low break), a reclaim candle closes back at/above the POC -> BUY. Targets: previous high, then a measured balance move. - PLAN B — FAILURE = FULL TRAVERSE: 2+ candle CLOSES below the VAL (a wick is NOT enough) plus a volume spike = acceptance below balance. The shape has failed and price tends to walk the WHOLE way back to the impulse origin -> SELL. b behind you: the exact mirror — sell failed rallies into value (Plan A), or buy the failure traverse when 2+ closes above VAH with volume appear (Plan B). D behind you + today opens INSIDE the D: - Range rules. Short the Value Area High rejection, long the Value Area Low rejection, target the POC first and the opposite edge second. The FIRST touch gives the best response — the fade counter limits how often each edge may be traded. ■ WHAT YOU SEE ON THE CHART - A volume histogram for every completed day, colored by its letter (mint P / red b / gold D), POC row highlighted - A big P / b / D letter above each day — hover it for the full lesson behind the shape - Yesterday's VAH / VAL / POC projected into today as live rails with explanatory tooltips - A bias note at every day open: which letter is behind you, where today opened, and both plans - Two-line BUY/SELL pills that explain WHY the signal fired (hover for the complete reasoning + Entry/SL/TP1/TP2) - Entry / SL / TP1 / TP2 lines, TP1 -> break-even management, TP2 runner ■ AUTOMATION / WEBHOOK Create one alert with condition "Any alert() function call" and paste your webhook URL. Every BUY/SELL/TP1/TP2/SL/BE event sends ready-to-use JSON: id, symbol, action, setup, shape, entry, sl, tp1, tp2, timeframe, time. There is also an optional end-of-day SHAPE alert so your bot can pick tomorrow's playbook automatically. ■ HOW TO USE 1) Apply to an intraday chart (5m - 1h; crypto, indices, FX, stocks). 2) Let at least one full day close so the first letter prints. 3) Read the panel: previous-day letter -> today's bias -> checklist. 4) Take the pills or automate them via webhook. The first day on the chart only collects data — letters start from day two. Educational note: shapes give a BIAS, not a guarantee — that is exactly why every setup ships with both Plan A and Plan B. Not financial advice. WHY THESE PARTS BELONG TOGETHER The volume profile and the shape classification are inseparable here. The profile alone tells you where volume accumulated; the classification into P, b and D shapes is what turns that distribution into a statement about who is trapped and where the day is likely to go. A P shape and a b shape can contain identical volume and mean the opposite thing - which is only visible once the profile is read as a letter rather than as a histogram.

Chỉ báo

của Traderlifestyle2026

Impulse Box Breakout Engine - Origin Range Buy Sell Signals IMPULSE BOX BREAKOUT ENGINE — a complete breakout trading system in one indicator: self-adjusting impulse boxes with entry arrow, stop, two fixed targets, a pink trailing-stop dot line and webhook automation. Rebuilt 1:1 from a professional German "Impulsbox" breakout engine (72-minute source webinar, analyzed frame by frame) and redesigned as a modern cockpit indicator. █ WHAT IT DOES The engine meters the market N bars back: the range the market traded in PLUS the length of every single bar inside it (compression check). When a STRONG impulse bar closes outside that range, the IMPULSE BOX appears over the consolidation: • CYAN BOX = long breakout — big entry arrow inside the box • GOLD BOX = short breakout — mirrored to the downside • Initial stop = the far side of the box (bottom for longs, top for shorts) • TARGET 1 + TARGET 2 (violet marks) are projected from the box height the moment the box appears — FIXED, never repainted, never moved afterwards • PINK DOTS = the trailing stop. It starts at the box edge and follows price with ~30% of the move as breathing room. It only ratchets in your favor — never back • At Target 1 the stop jumps to break-even or better. After Target 2 the system follows the source rule: "never leave the market voluntarily — let the stop take you out" █ SELF-OPTIMIZING ENGINE Markets are sideways ~80% of the time — rigid breakout parameters fail there. This engine adapts automatically: • TREND regime (ADX based): short lookback, wider targets (+35% / +100% of box height) • RANGE regime: longer lookback, stricter impulse filter, closer targets (+25% / +75%) • AUTO-RECALIBRATION: after a false breakout the impulse threshold is raised temporarily — fewer but cleaner boxes. A winning box resets it • The cockpit shows the current regime, calibration and effective parameters at all times █ HONEST LIVE STATISTICS The cockpit counts every box on your chart and shows the real Target-1 and Target-2 hit rates — no marketing numbers, live counted on your symbol and timeframe. On XAUUSD 15m the default engine printed 500+ boxes with a T1 hit rate above 90% at the time of publishing (past performance never guarantees future results). █ DIRECTION BIAS FILTER The #1 rule of the source system: trade boxes only in the direction of the higher-level move. The indicator automates this via EMA-200 + Supertrend bias. Choose: Off / Mark counter-bias boxes (dimmed + warning) / Filter them out completely. Supertrend companion arrows are included as extra confluence. █ EVERY SIGNAL EXPLAINS ITSELF Hover any BUY/SELL pill: how many bars of consolidation, how strong the impulse bar was (x average bar), which range edge broke, which regime the engine was in, whether the box agrees with the bias — plus entry, stop and both targets. No black box. █ WEBHOOK AUTOMATION (BOTS / BRIDGES) Create ONE alert with "Any alert() function call" and your webhook URL. The indicator fires ready-to-use JSON on BUY, SELL, T1_HIT, T2_HIT, TRAIL_EXIT and SL_HIT — including entry, stop, both targets, box levels, regime and live hit rates. Works with any webhook bridge, bot or auto-trader. █ HOW TO USE 1) Add to chart — works on ALL symbols and ALL timeframes (crypto, gold, forex, indices, stocks) 2) Use standard candles or OHLC bars (Heikin-Ashi smoothing swallows breakouts — a key finding of the source webinar) 3) Wait for a box + arrow, entry at the breakout close, stop at the far box edge 4) Take partial profit at Target 1, let the rest run with the pink trailing dots 5) Automate via webhook JSON if you want █ SETTINGS Everything is configurable: manual mode with fixed lookback/impulse strength, target distances, trailing gap, exit-at-T2 mode, bias filter mode, Supertrend, chart theme, cockpit position and all alert toggles. Educational tool only — not financial advice. Trading involves substantial risk. Always test on a demo account first and never risk money you cannot afford to lose. WHY THESE PARTS BELONG TOGETHER The impulse detection and the box are one mechanism, not two features. The impulse identifies the candle sequence that moved the market; the box freezes the range that impulse came out of, because that range is the level the market has to defend for the move to continue. Detecting impulses without marking their origin gives you a signal with no invalidation, and drawing boxes without an impulse gives you consolidation zones with no direction.

Chỉ báo

của Traderlifestyle2026

Previous Day / Week / Month Range Levels Draws the high, low and internal subdivisions of the last completed period on up to three higher timeframes at once. Why the prior range matters A finished period leaves behind a structure the market keeps referring back to. Yesterday's high and low are where yesterday's argument was settled, and price spends a surprising amount of the next session negotiating with those two numbers — breaking them, failing at them, or holding between them. The subdivisions add resolution to that. The midpoint separates the upper and lower half of the range, and which side price accepts on tells you who won the period. The quarters mark the shallow zones inside each half — the levels a pullback reaches before it has retraced anything meaningful. What it draws Prior period high and low, as solid boundary lines Midpoint at 50% Quarters at 25% and 75% Optional eighths at 12.5% and 87.5% for wider ranges Price labels on every level, with the timeframe named Three timeframe slots, each with its own colour and on/off switch. Defaults are Daily and Weekly enabled, Monthly available. Any timeframe works — 4H, quarterly, yearly — so intraday traders and swing traders can both configure it sensibly. The levels do not repaint Each level is read from the previous completed bar of its timeframe using a lookahead-safe request. Once a period closes, its levels are fixed and will not move. Nothing is recalculated on the developing bar, and nothing you see on historical bars was drawn with information from the future. That means the numbers are frozen for the whole current period. The daily levels you see at the open are the same ones at the close. Notes on use Session settings matter. On a chart set to regular hours, the daily range is built from regular-hours prices only — switch to extended hours and every level moves. Neither is wrong, but be deliberate about which one you're reading. Multi-period timeframes such as 2W or 6M are grouped by TradingView from a fixed reference point, which may not align with where you'd assume a fortnight begins. Worth eyeballing directly before relying on them. Drawings are anchored by timestamp rather than bar index, so they stay put when you scroll back and TradingView loads more history. Bar indices renumber every time more history loads; timestamps do not. There is also a fully transparent plot of close in there, doing a job that is easy to miss. Lines and labels do not feed TradingView's autoscale, so a script that only draws has no price range of its own and can be handed a separate price scale — at which point every level sits at an offset from the candles. The transparent plot gives the script a real range and locks it to the symbol's. Settings Three timeframe slots, each with an enable toggle, a timeframe and a colour Midpoint, quarters and eighths switched independently Price labels on or off, with a size option Boundary line width, and a separate transparency for the inner levels so the range edges stay dominant Extend left and extend right, in bars Open source. Read it, fork it, adapt it. The non-repainting request pattern, the time-anchored drawing and the scale anchor are all worth stealing for your own scripts. For educational purposes only. Nothing here is financial advice, a recommendation, or a solicitation to trade. Levels are reference points, not signals.

Chỉ báo

của ThinklessTrade

Anchor rails - session levels and event countdown [AuraSznfx]Most intraday trading is organized around a handful of scheduled clock times — the London open, the 8:30 and 10:00 data releases, the cash open, the end of the first hour, the 2:00 policy release. This script makes that schedule visible on the chart instead of tracked in your head, and pairs it with the price levels that formed before each one. There are many scripts that draw session highs and lows. What this one adds is the clock layer on top of them: a countdown to the next scheduled anchor, a phase read-out describing where the current bar sits relative to that anchor, a configurable window marked either side of it, and a running count of how many of the day's tracked levels have already been taken. WHAT IT DRAWS Five session ranges: overnight, London, premarket, opening range, and first hour. Each window's start and end time is a session input you can change, so the defaults are a starting point rather than a rule. While a window is open the script tracks its running high and low and shows them as a box. When the window closes, the box is deleted and replaced by two horizontal lines fixed at the final high and low, extended forward a configurable number of bars. Yesterday's high, low and close, pulled from the daily timeframe with lookahead disabled. An optional midpoint is available. HOW THE LEVEL-TAKEN LOGIC WORKS Once a range is locked, each of its two lines is watched independently. The high is marked taken the first time a bar's high exceeds it. The low is marked taken the first time a bar's low falls below it. Detection is one-way and permanent for the session — a level does not un-take itself if price returns. When a level is taken you can have it dim to a configurable transparency, dim and switch its label to a marked state, or delete outright. That choice is a style preference; the underlying state is tracked the same way regardless. Note the deliberate limitation: detection uses the bar's high and low, so on a live bar a level can register as taken and then the bar can close back inside the range. If you want confirmed-close behavior instead, use a higher timeframe or wait for the bar to close before acting on the alert. HOW THE ANCHOR CLOCK WORKS You enable whichever of the nine preset times you care about, plus one custom hour and minute of your own. Every one is read in the timezone you select at the top of the settings. On each bar the script builds a timestamp for every enabled anchor on the current date, then finds the nearest one ahead of the current bar close and the nearest one behind it. From those two distances it produces four outputs in the panel: Time to the next anchor, formatted as a countdown. A progress bar filling over the final 30 minutes before it. A phase label, resolved in this priority order: inside the post-anchor window, within 15 minutes after, inside the pre-anchor window, inside 10 minutes, inside 30 minutes, otherwise standby. A taken count out of the ten tracked level lines. If every enabled anchor for the day has passed, the countdown rolls to the earliest one on the following day. The event window is the pre and post minute values you set. When the current bar falls inside it, the chart is optionally tinted, and an alert can fire once as it begins. Nothing about this window predicts direction. It marks that a scheduled release is close, which is information you would otherwise be checking a calendar for. HOW TO USE IT Set your timezone first; everything else reads from it. Adjust the five session windows to the instrument you trade — the defaults are built around US index futures on New York time and will not suit an FX or crypto session structure without changes. Then switch off the anchor times that aren't relevant to your market. The levels show where price has already been tested. The clock shows when the next scheduled event arrives. What you do with either is your decision — this script issues no buy or sell signals and takes no view on direction. ALERTS Two alert condition entries are provided, for any level taken and for the event window opening, usable from the standard alert dialog. Individual per-level alerts fire through the alert() function on bar close. Payloads can be sent as plain text or as structured JSON for webhook use, toggled in the settings. NOTES AND LIMITATIONS Written in Pine v6. Locked levels do not repaint. A range only becomes lines after its window has closed, and those values never change afterward. The daily request uses lookahead_off. No future data is accessed anywhere in the script. The phase labels describe clock position only. They are not signals and carry no expectation of what price will do. The script has no view on direction and produces no entry or exit signals. It is a context tool. On very low timeframes the drawing limits of 500 lines, boxes and labels can be reached over a long history. Reduce the extend-right value or switch off sessions you do not need.

Chỉ báo

của AuraSznfx

Impulse Origin [Smart Money]A strong move only tells you it mattered once it is over. Impulse Origin waits for that moment: a run that closes in one direction for a set number of bars without a single counter-close, ending on a bar whose volume has expanded against its own average. When that run is complete, the tool walks back and marks the candle it started from — and not just any opposing candle, but one whose liquidity was taken by the candle that came after it. The result is a zone at the origin of the move, which is then tracked: the first close through it flips its role between support and resistance, and the second close through it retires it. HOW IT WORKS The idea behind it is that the beginning of a move is only interesting if the move turned out to be decisive, and you cannot know that while it is still running. So the measurement is deliberately backward-looking: the run is the gate, the origin is the output. The run — over the last N bars there must be no close against the direction at all. A single lower close breaks an up-run; a single higher close breaks a down-run. This is measured on closes, not on candle bodies, so the run describes where price actually settled bar after bar. The volume gate — the bar that completes the run must carry at least a chosen multiple of the average volume over its own baseline period. The baseline is independent of the run length, so a long run cannot inflate its own reference level. The origin — from that bar the tool searches backwards for the first candle that closed against its own open: a down candle for an up-run, an up candle for a down-run. This is the candle price left from. The sweep requirement — an opposing candle only qualifies as an origin if its liquidity was taken by the candle immediately after it. For a support origin, the next candle's low must trade below the origin low; for a resistance origin, the next candle's high must trade above the origin high. Search Back keeps walking further back until such a candle is found. First Only tests just the first opposing candle and draws nothing if it does not qualify. Off removes the requirement entirely and uses the opposing candle alone. The zone — with the sweep requirement active, the zone spans the combined range of the origin candle and the candle that swept it, so the swept level sits inside the zone rather than at its edge. The zone is anchored to the origin candle and extends forward from there. Role tracking — a zone holds a role until a bar closes beyond it. Wicks through it change nothing. On the first close beyond, the zone switches colour and swaps role: a support that is closed through becomes resistance, a resistance that is closed through becomes support. On the second close beyond, it is removed from the chart. An uninterrupted run of higher closes therefore produces a support zone below, at the candle the run started from — and a run of lower closes produces a resistance zone above, the same way. A run of N bars completes with no counter-close and with expanded volume on the final bar The tool searches backwards for the opposing candle that started it, keeping only one whose low or high was taken by the candle after it The zone is drawn from that candle, then tracked: first close through it flips the role, second close through it removes it Original zones and flipped zones are kept in separate pools with their own capacity, so a new signal never pushes out a zone that has already flipped. Because a long run can produce several trigger bars in a row that all resolve to the same origin candle, the tool remembers the origin it last used and will not redraw the same candle. HOW TO READ A zone marks where a decisive move began, with the stops below or above it already taken before it left. Price returning to that area is returning to the point it departed from. A grey zone is still in its original role. A blue zone has been closed through once and is now working the other way round — the level that was holding price up is now the level it is trading under, or the reverse. A blue zone is on its last life by design. The next close through it, now in its flipped role, removes it rather than leaving an old level on the chart forever. Only closes matter. A wick through a zone leaves it untouched, so a zone survives being tested and only changes when price actually settles on the other side. It fires rarely by design. A run with no counter-close at all, ending on expanded volume, is not a common event — on most charts you will see a handful of zones rather than a wall of them. Shorten the run length or lower the volume ratio for more, raise them for fewer and more selective ones. The shading carries no information: every zone is drawn at the same intensity, because the zone sits on the origin candle while the volume condition was measured on the bar that completed the run. INPUTS Streak Length — how many consecutive bars must close in one direction with no counter-close. Volume Average Length — the baseline period the trigger bar's volume is measured against. Min Volume Ratio — how many times the average that volume must be. Higher gives fewer, more selective zones. Max Origin Lookback — how far back the search for the origin candle may run. Liquidity Sweep — Off, Search Back, or First Only, as described above. Original Support / Original Resistance — draw each side, with its own capacity for how many grey zones are kept. Flipped Support Max / Flipped Resistance Max — capacity for zones that have already flipped, held separately from the originals. ATR Length / Min Zone Height (%ATR) — if a zone is thinner than this share of ATR, it is expanded symmetrically around its midpoint. At 0 the zone keeps the exact range of the candles it came from. Colours / Transparency Offset — the original and flipped colours, and a single offset that shifts the tone of all zones together. NOTES & LIMITS A zone records where a decisive move began and whether that level has since been closed through. What you make of it at the next touch is yours, and that is exactly as it should be. The volume gate is part of the mechanism, so the tool needs a volume feed to produce anything at all — on a symbol that publishes no volume, no zones are drawn, and on forex and CFDs the volume is tick volume (the number of price updates, not contracts traded), which makes the gate read more loosely there. The zone is anchored to the origin candle in the past but is published on the close of the bar that completes the run, so on a chart you are scrolling back through, the zone was not on the screen for the bars between the two. Its price boundaries are set when it is created and never move afterwards: creation, the role flip and the removal all happen on closed bars, and the colour change is a change of state, not of level. The zone is as tall as the candles it came from — with the sweep requirement active that is the origin candle and the candle that swept it combined — so on volatile instruments it can be a wide band; Min Zone Height only ever expands a zone, never shrinks one. Breaks are judged on closes alone, so a wick beyond a zone leaves its role unchanged. No profit, win-rate, or guarantee claim. Open-source under CC BY-NC-SA 4.0 — non-commercial use, attribution to ElisTools required for reuse or derivatives. TradingView (Pine v6) only.

Chỉ báo

của ElisTools

Liquidity Hunter | SMC System - Full Suite A full-sequence Smart Money Concepts strategy that trades the way institutional order flow moves — liquidity sweep, displacement, structure break, and a confirmed retest. This strategy chains them into the complete institutional sequence: a real liquidity pool gets taken, an impulsive displacement candle breaks structure, a correctly-identified order block gets frozen at that exact moment, and only a genuine retest with confirmation triggers the entry. Features The Full SMC Sequence HTF Bias → Liquidity Pool Taken → Sweep → Displacement Candle → BOS/CHoCH → FVG → Return to OB → Confirmation → Entry — every stage gated on the one before it, so entries reflect genuine confluence rather than a single coincidental signal. Real Liquidity Pool Tracking Tracks multiple historical swing highs/lows simultaneously (not just the most recent one), so a sweep can trigger off any untaken pool — mirroring how liquidity actually accumulates at equal highs/lows and older structure. Displacement Filter Structure breaks only count as valid if the breaking candle's body exceeds a configurable ATR multiple — filters out slow grinds through a level that aren't genuine institutional impulses. Frozen-Zone Retest Logic Once an OB forms, its boundaries are locked/frozen at that moment. Entries reference this frozen snapshot, not a live, potentially-mutated box — with an overlap-based touch test (not a strict "price must sit inside the zone" test) for realistic retest detection. Configurable Confirmation Filters After a retest touch, choose from: no confirmation, rejection candle, engulfing candle, close back through the OB, or a break of the retest candle's high/low — tune entry strictness to your risk tolerance. Higher Timeframe Bias Optional HTF trend filter ensures you're only taking setups aligned with the dominant trend on a higher timeframe. FVG Confluence Option Optionally require that the structure break actually creates a fair value gap — an added imbalance-based confluence layer before a setup is even considered. Liquidity-Target Take Profit Choose a fixed R-multiple target, or let the strategy aim at the nearest untaken liquidity pool in the trade's direction — closer to how institutional targets are actually theorized to work. Risk-Based Position Sizing Size trades by % risk per trade (scaled to actual stop distance) or flat % of equity, with a hard position-size cap. Realistic Cost Modeling Commission and slippage built into the backtest engine from the start. Notes Start with requireOBRetest = true and confirmationMode = "None" to validate the base sequence produces trades before layering on stricter confirmation modes. HTF Bias and FVG Confluence are off by default — each meaningfully reduces trade frequency in exchange for higher-conviction setups; enable incrementally and check trade count after each change. Works on any intraday or swing timeframe — the sequence logic (sweep → displacement → BOS → retest) is timeframe-agnostic, though displacement thresholds and pool aging windows may need retuning per timeframe. "Nearest Liquidity Pool" take-profit mode requires active, untaken pools in the trade's direction to function — falls back to the R-multiple target if none exist.

Chiến lược

của blitz_locked

Liquidity Draw Probability Map [ForexCracked]🔵 OVERVIEW Every liquidity tool draws the pools. This one measures whether price actually goes there. The Liquidity Draw Probability Map finds the resting liquidity on your chart, equal highs and lows, the prior day high and low, the prior week high and low, and the session extremes, then studies your chart's own history and prints what actually happened to pools like each one: how often price reached them, how long it took, and how often the touch rejected versus cut straight through. The phrase "price is drawing on liquidity" gets said a thousand times a day. This script puts a measured number on it. 🔵 HOW THE MEASUREMENT WORKS Every pool is filed by two things: its type, and how far from price it was born, measured in ATR units so the numbers transfer across symbols and timeframes. For each combination the script keeps running counts on your chart's own history: • How many pools like this were created • How many were reached within 50 bars • Of the touches, how many rejected (price closed at least 1 ATR back inside within 20 bars) and how many cut through (price closed at least 0.5 ATR beyond). A touch that does neither within the window is filed as a stall. • The median number of bars it took to get there Nothing is estimated and nothing comes from outside data. Every figure is a frequency counted on the chart in front of you, and the sample size is printed next to it, so a number built on 12 events never dresses up as a number built on 300. 🔵 THE MAP Active pools draw as horizontal lines from the swing that created them. The line gets thicker and more solid as its category's measured reach frequency gets higher, so the levels price has historically honoured stand out and the ones it historically ignores fade back. Each pool carries a compact label: type, measured reach frequency, rejection share of touches, and the sample size behind those numbers. When a pool is touched, a small circle prints on that bar to mark the purge (these are measurement events, not signals, and they can be switched off). The engine then watches the next 20 bars, classifies the outcome, adds it to the tables, and retires the pool. Purged liquidity leaves the map, exactly as it leaves the market. 🔵 WHAT THIS IS NOT This script fires no signals. There are no buy or sell arrows, no sweep alerts dressed as entries, no order blocks and no fair value gaps. It does not tell you to trade anything. It is a measurement instrument: it maps where the resting liquidity is and reports what historically happened to liquidity like it, with the sample sizes in plain view. What you do with that context is your decision. 🔵 NET DRAW BIAS Each active pool contributes its measured reach frequency, discounted by how far away it currently sits. Everything above price is summed against everything below, and the result is z-scored against its own recent history. A strongly positive reading means the statistically heavier magnet is overhead. A strongly negative one means it is below. The dashboard prints the score and the direction plainly. 🔵 THE DASHBOARD • Nearest pool above: type, distance in ATR, measured reach frequency, median bars to reach, sample size • Nearest pool below: the same • Net Draw Bias: score and direction • Last purge: which pool type was taken and how the touch resolved • Sample: total pools logged and bars of history measured 🔵 HOW TO USE • Treat high-frequency pools as context, not entries. A pool whose category was historically reached 75 percent of the time within 50 bars is a level price has tended to gravitate toward on this chart. Useful when planning targets, never a trigger on its own. • Read the rejection versus cut-through split before assuming a reaction. Some categories on some charts get swept and keep going. The split tells you which kind of chart you are on. • Use Net Draw Bias for directional context between levels. It answers "which side's liquidity is heavier right now" with a measured number instead of a feeling. • Respect the sample sizes. Early in a chart's history the tables are thin and the map says so. The numbers firm up as history accumulates. • Combine with your own structure and risk rules. This is a measurement instrument. It does not know your plan. 🔵 SETTINGS • Pivot strength and equal-level tolerance control how pools are detected • Reach horizon (default 50 bars) and outcome window (default 20) control the measurement windows • Session input defines the session whose extremes are tracked, set it to your Asia hours for the classic use • Max pool age retires stale levels; per-side caps keep the map readable • Dashboard position, colors, and line extension are adjustable 🔵 ALERTS • Price approaching a high-reach pool (within 0.25 ATR, category at or above 70 percent with a meaningful sample) • Pool purged (liquidity taken) • Net Draw Bias flips sign ⚠️ DISCLAIMER These are descriptive statistics of past price behaviour on your chart, not predictions. A pool that was historically reached 80 percent of the time can be ignored today. Sample sizes vary by chart and timeframe, and small samples are unreliable by nature. Nothing here is a trade signal, and results depend on market conditions, settings, and your own execution and risk management. Shared for educational and research purposes. Not financial advice.

Chỉ báo

của ForexCracked

Opening Range Breakout Engine - Session Range Signals aDESCRIPTION: RANGE BREAKOUT PRO is a complete range-breakout trading engine: it detects tradeable ranges from confirmed swing pivots, fires BUY and SELL signals when price breaks out in the direction of the trend, and then manages every trade on the chart with entry, stop loss, take profit, break-even and trailing logic - all fully visualized and fully automatable via webhook alerts. HOW THE ENGINE WORKS 1. RANGE DETECTION - Confirmed swing highs and swing lows (pivot length configurable) become the active RANGE HIGH and RANGE LOW. Each extreme is marked on the chart with a dot and a vertical marker line. A range must be wide enough (minimum height in ATR) and fresh enough (maximum age in bars) to be tradeable - micro-ranges and stale levels are skipped automatically. 2. BREAKOUT SIGNAL - A signal fires only when a candle CLOSES beyond the range extreme plus an ATR buffer (no wick fake-outs), the gradient trend ribbon points in the breakout direction, the trend strength score clears your Buy/Sell Strength threshold, the breakout is not overextended (max distance from the ribbon in ATR - no chasing exhausted moves), and an optional cooldown after a losing trade has expired. Optional MTF Agreement requires the 15-minute trend to confirm. 3. TRADE MANAGEMENT - Every signal is managed like a real trade, live on the chart: - TP1 (partial target) banks the win early and moves the stop to break-even - the remainder runs to the full R-multiple take profit or a chandelier trail - green TP box and red SL box grow bar by bar from the entry, exactly like a position tool - price tags at the right edge show Entry, Stop Loss, Take Profit and live Profit/Loss % - every closed trade is marked with a tick (win), circle (break-even) or cross (loss) 4. TWO TRADE MODES - "TP/SL Mode" (fixed targets, split TP1 + runner) or "Trailing Mode" (no fixed target, the trail line is the moving stop). THE COCKPIT PANEL - MARKET OVERVIEW: multi-timeframe trend dashboard - live trend strength meters for the chart timeframe, 15m, 1H, 4H and 1D - SIGNAL SETUP: entry system, MTF agreement, current signal (Long / Flat / Short), Buy/Sell strength thresholds, trend filter state, trade mode, active Take Profit and Stop Loss levels - PERFORMANCE: asset, exchange, timeframe, total trades and live win rate calculated from every signal on the chart history - no cherry picking, the counter runs over everything the engine fired Win rate accounting is transparent: a trade counts as WIN when TP1 is banked, as LOSS when the initial stop is hit first, and break-even exits are tracked separately - the same split-target accounting professional scalpers use. WHY-EXPLANATIONS ON THE CHART Every BUY/SELL pill carries a tooltip that explains WHY the signal fired: which range level broke, the trend strength at the trigger, entry, stop and target prices. Range dots explain the level they mark. Nothing is a black box. WEBHOOK AUTOMATION Create one alert with condition "Any alert() function call" and paste your webhook URL. The indicator sends ready-to-use JSON for every event: BUY, SELL, TP_HIT, SL_HIT, TRAIL_EXIT, BE_EXIT - including symbol, price, stop, target, trade mode, win rate and timeframe. Connect it to any bridge or bot and the strategy runs hands-free. WORKS ON Any symbol and timeframe: indices (NASDAQ, S&P, DAX), gold and forex, crypto, stocks. Scalping on 1-5 minute charts, day trading on 15m-1H, swing trading on 4H-Daily. Defaults are tuned for intraday breakout scalping. DISCLAIMER This indicator is a technical analysis tool, not financial advice. Past win rates do not guarantee future results. Always test on a demo account first and manage your risk. WHY THESE PARTS BELONG TOGETHER An opening range on its own produces a break in both directions on most days. The session filter and the range-quality measurement exist to decide which of those breaks is tradeable: the session defines when the range is allowed to form, and the quality measurement rejects ranges that are too wide or too thin to hold. The breakout level is only meaningful once both have passed.

Chỉ báo

của Traderlifestyle2026

ICT Entry Model Liquidity Sweep, MSS & FVG [LunqFX]A smart-money entry is never a single signal — it is a sequence. Price runs the stops beyond a swing, structure shifts the other way, and the entry is taken from the imbalance that shift left behind. Most ICT indicators draw one of those pieces and leave you to assemble the rest by hand. This one tracks the whole sequence live and finishes it with an actual trade: entry, stop, target and a quality score that tells you whether the setup was worth taking at all. ❶ THE FOUR STAGES ▸ LIQUIDITY SWEEP — price trades beyond a swing high or low, takes the stops resting there, and closes back inside. The sweep is marked and the level it raided is drawn. This is the manipulation leg, and it is where the stop for the trade will sit. ▸ MSS (MARKET STRUCTURE SHIFT) — after the sweep, price closes through the last short-term swing in the opposite direction. This is the confirmation that the sweep was a reversal and not a continuation. Note that the shift is measured against internal structure, not the major swing: waiting for a major swing to break would put the entry far too late, which is the single most common mistake in automated ICT tools. ▸ FVG ENTRY — the displacement that broke structure leaves a three-candle imbalance. That gap is the entry zone, drawn as a box, because price commonly returns to fill it before continuing. ▸ RISK AND TARGET — the stop goes beyond the sweep extreme, the target is your chosen R multiple. Both are drawn as filled zones running back to the entry, so the whole trade reads as one object instead of a set of loose lines. ❷ SETUP QUALITY 0–100 Not every sequence deserves a trade, and this is where the indicator does something no other entry tool does. Every setup is graded on four measurable properties: ▸ SWEEP DEPTH — how far beyond the level price actually ran, in ATR. A deeper raid means more stops were genuinely taken. ▸ DISPLACEMENT — how decisively the structure was broken, in ATR. A weak break is a weak setup. ▸ FVG SIZE — how large the imbalance is. A bigger gap is a stronger entry. ▸ SPEED — how quickly the shift followed the sweep. A fast reversal is aggressive; a slow one has lost its edge. The four are blended into a single 0–100 score shown on every entry tag and in the dashboard. Set the minimum quality in the settings and weak sequences simply stop being drawn — you trade the good ones instead of every arrow. ❸ HOW TO TRADE IT 1 — Wait for the SWEEP marker. The dashboard turns amber and reads SWEEP · WAITING MSS. Nothing to do yet: the manipulation has happened but it is not confirmed. 2 — Wait for MSS. When structure shifts, the setup is drawn and the dashboard turns green for a long or red for a short. If structure does not shift within the allowed window, the sweep is discarded and the model resets — no stale signals. 3 — Check the quality score before committing. High scores come from a deep sweep, a decisive break and a clean imbalance. If the number is low, the sequence was technically valid but structurally weak. 4 — Place the trade from the ticket. Entry at the FVG edge, stop beyond the sweep, target at your R multiple. The dashboard shows all three plus the exact risk in price, so the position size follows directly. 5 — Let price come to you. The FVG is a limit entry, not a market entry. If price never returns to the gap, the setup is simply skipped — that is the model working as intended. ❹ HOW IT WORKS Liquidity swings and internal structure are detected with confirmed pivots, so a level only exists once the bars on both sides of it have closed. A sweep requires a bar to trade beyond the swing and close back inside it, and it is only registered when the shift level is still unbroken — otherwise the sequence could confirm itself on the very next bar. The structure shift requires a close through that internal level within your chosen window. The imbalance is found in the displacement leg using the standard three-candle definition. The stop is the sweep extreme, the target is the entry plus or minus the risk times your R multiple, and setups whose stop would be smaller than a fraction of ATR are rejected as untradeable. The quality score is a weighted blend of the four properties above, each normalised by ATR so the score behaves the same on every symbol and timeframe. Works on any market and timeframe — forex, gold, indices, crypto and stocks. Intraday charts from 5m to 4h suit the model best, since that is where liquidity raids and structure shifts happen most often. SETTINGS — liquidity swing length, internal structure length, maximum bars from sweep to shift, R multiple for the target, minimum stop distance, minimum quality, number of setups kept, level extension, FVG and level visibility, candle colouring and dashboard position. ALERTS — long setup confirmed, short setup confirmed, and any setup confirmed. All fire on closed bars only. NON-REPAINTING — every stage is validated on bar close and built from confirmed pivots. A setup that has printed never moves, never changes its levels and never disappears. The four stages are not four indicators bundled together — they are four steps of one entry model, and none of them is tradeable alone. The sweep without the shift is just a wick; the shift without the sweep is just a break; the imbalance without either is just a gap. That is why they belong in a single tool. This indicator is an educational market-analysis tool, not financial advice. The quality score describes the structure of a setup and does not predict its outcome. Always confirm with your own analysis and manage your risk.

Chỉ báo

MA Retest Strategy MA Retest Strategy Overview MA Retest Strategy is a trend-following system built around a simple but powerful idea: price rarely moves in a straight line — it pulls back to test a moving average before continuing in the direction of the trend. Instead of just plotting two moving averages and leaving you to guess, this indicator turns that pullback-and-continuation behavior into a complete, rule-based trade framework: it detects the retest, marks the exact entry, calculates a volatility-aware stop-loss and take-profit, tracks the outcome of every signal, and even scans four other symbols of your choice for the same setup in real time. The trend direction is defined by two Exponential Moving Averages (EMA) — a fast one (default length 50) and a slow one (default length 200). Their relationship (fast above slow = uptrend, fast below slow = downtrend) is combined with a retest of the fast EMA: price must pierce through the fast EMA against the trend and then close back on the trend side. That close is the signal. Trading Logic Long entry conditions: 1. The fast EMA is above the slow EMA (uptrend). 2. Within the last few bars, price has pierced below the fast EMA (a genuine pullback, not just noise). 3. The current candle closes back above the fast EMA, confirming the retest is over and the trend is resuming. When all three conditions align, the indicator plots a BUY label, and immediately draws four price levels: Entry, Stop-Loss, Take-Profit, and Breakeven, each as a line with a live price tag on the right edge for easy order placement. Short entry conditions are the mirror image: fast EMA below slow EMA, a pierce above the fast EMA, and a close back below it. If price is currently trading between the two moving averages (neither clearly above nor below), no new signal is evaluated — this "no man's land" filter avoids chasing signals in a choppy, undecided market. Once a setup is triggered, it stays open (as a pending order, then as an active trade once price reaches the entry) until it's resolved by hitting the stop, hitting the target, timing out, or being invalidated by an opposite signal — only one setup per direction is ever open at a time, and an opposite signal automatically cancels whatever is currently active. Risk Management The stop-loss is never left to guesswork. You can choose between three calculation methods: • Swing (High/Low): stop placed at the nearest swing low/high within a lookback window. • ATR: stop placed at a multiple of the Average True Range from the entry price — automatically adapts to the current volatility of the instrument. • Percent of Price: a fixed percentage distance from the entry price. Regardless of the method chosen, a hard risk ceiling (expressed as % of price) prevents the stop from ever being placed unreasonably far away — for example because of a single abnormal wick or a bad tick in the data feed. Swing mode additionally has its own volatility-aware clamp (a maximum deviation expressed in ATR multiples), since raw swing highs/lows are the most exposed to being skewed by one outlier candle. The take-profit is calculated as a multiple of the initial risk (an "R-multiple"), and a separate breakeven marker line shows where price would need to reach for you to consider moving your stop to entry — because in a mean-reversion-to-trend system like this, once price reaches roughly 1R in your favor, the probability of it snapping back toward the moving average (rather than continuing cleanly to the full target) increases, so protecting the trade at breakeven is a sound practice. Dual Dashboard System Statistics Panel — tracks every signal the indicator has generated on the current chart and breaks the results down into Take-Profit, Stop-Loss, and Breakeven outcomes (a stop hit after price already touched the breakeven level is counted separately from a "clean" stop-loss, since in practice you'd have moved your stop by then). You can filter the statistics to the full history, the last N days, or from a fixed date — ideal for quickly gauging how well the current settings are performing on a specific symbol before you commit to trading it. Symbol Scanner — lets you monitor up to five other symbols for the exact same setup, in real time, without leaving your current chart. For each symbol it shows whether a signal is currently pending or already active, in which direction, and its entry/stop/target levels. Note: the scanner applies the same strategy settings (moving average lengths, stop method, R-multiple, etc.) that are set for the main chart — it is not independently configurable per symbol. How to Use 1. Open the symbol and timeframe you're interested in, and check the Statistics panel — a strong win rate and consistent R:R suggest the market is currently trending cleanly enough for mean-reversion entries to work. 2. If the recent win rate is high, the market is respecting the moving average structure and the setup is worth trading. If it's dropping, the market may be entering consolidation — better to wait for a cleaner trend to re-establish. 3. Use the plotted Entry/Stop/Take-Profit/Breakeven lines and their price tags to place your actual order. 4. Once price reaches the breakeven marker, consider moving your live stop-loss to entry — this is a discretionary decision the indicator flags for you but does not automate. 5. Use the Symbol Scanner to keep an eye on other assets in your watchlist without switching charts constantly. Settings Reference General • Source — the price series used to calculate both moving averages (default: Close). Moving Average • MA fast — length of the fast EMA (default 50). • MA fast line width — plot thickness of the fast EMA. • MA slow — length of the slow EMA (default 200). • MA slow line width — plot thickness of the slow EMA. • Bull color / Bear color — color of each MA line and of the shaded fill between them (tinted according to current trend direction). Strategy • MA Pierce Check Window (bars) — how many recent bars are checked to confirm price genuinely pierced the fast EMA before the retest close (default 3). • Swing Point Lookback (bars) — lookback window used to find the nearest swing high/low for Swing-mode stops, and also used as part of the warm-up gate before the indicator starts evaluating signals (default 10). • Take Profit, R (risk multiple) — target distance expressed as a multiple of the initial risk (default 3 = 3R). • Max Bars in Open Setup (timeout) — if a signal doesn't resolve (neither stop nor target hit) within this many bars, it's force-closed and logged separately as a timeout rather than left open indefinitely (default 300). • Stop Loss Calculation Method — choose between Swing (High/Low), ATR, or Percent of Price. • ATR Length — averaging period for the ATR calculation (default 14). • ATR Multiplier for Stop — multiplier applied to ATR when the Stop mode is set to ATR (default 1.5). • Stop, % of Entry Price — fixed stop distance used only when the Stop mode is set to Percent of Price (default 1%). • Max Allowed Risk, % of Price — hard ceiling on stop distance, applied regardless of the selected mode, to protect against abnormal candles or bad data ticks (default 5%). • Also Cap Swing Stop by ATR (recommended) — an additional, volatility-adaptive safety clamp that applies only in Swing mode, tighter and more responsive than the flat percentage cap. • Max Swing Stop Deviation, x ATR — multiplier for the clamp above (default 3). • Move to Breakeven, R (risk multiple) — the R-distance at which the breakeven marker line is drawn (default 1 = 1R). Visualization • Show BUY/SELL Labels — toggle the signal labels on the chart. • Show SL/TP/BE Price Tags on Lines — toggle the live price tags at the right edge of each level line. • Fill Risk/Reward Zones — toggle the shaded risk/reward boxes. • BUY Label Color / SELL Label Color — colors of the signal labels. • Entry Line Color / Stop Loss Line Color / Take Profit Line Color / Breakeven Line Color — colors of the four level lines. • Reward Zone Color / Risk Zone Color — colors of the shaded zones. • Entry/SL/TP Line Width — thickness of the level lines. Statistics • Show Statistics Panel — toggle the on-chart stats table. • Panel Position — corner of the chart where the table is drawn. • Text Size — table font size. • Statistics Period — All History, Last N Days, or From Fixed Date. • N Days Back — used when Statistics Period is set to "Last N Days". • Start Date — used when Statistics Period is set to "From Fixed Date". Symbol Scanner • Show Scanner for Other Symbols — toggle the scanner table. • Symbol 1–5 — the five symbols to monitor. • Scanner Timeframe — timeframe used for the scan; leave blank to match the current chart's timeframe. • Scanner Panel Position — corner of the chart where the scanner table is drawn. • Scanner Panel Text Size — scanner table font size. Alerts The indicator includes two ready-to-use alert conditions — Buy signal and Sell signal — that fire once per bar close and include the entry price, stop-loss, take-profit, and their distance in ticks directly in the alert message, so you can act on them without needing to open the chart. Disclaimer This indicator is a tool to assist with technical analysis and trade planning — it does not constitute financial advice, and past signal performance shown in the Statistics panel is not a guarantee of future results. Always combine it with your own risk management and market context. Обзор MA Retest Strategy — это трендовая система, построенная вокруг простой, но рабочей идеи: цена редко движется по прямой — она откатывается к скользящей средней для ретеста, прежде чем продолжить движение по тренду. Вместо того чтобы просто отрисовать две скользящие средние и оставить трейдера гадать, этот индикатор превращает такое поведение "откат-продолжение" в полноценную систему с чёткими правилами: он находит ретест, отмечает точный вход, рассчитывает стоп-лосс и тейк-профит с учётом волатильности, отслеживает исход каждого сигнала и даже сканирует ещё четыре выбранных вами актива на предмет такой же ситуации в реальном времени. Направление тренда определяется двумя экспоненциальными скользящими средними (EMA) — быстрой (по умолчанию период 50) и медленной (по умолчанию период 200). Их взаимное расположение (быстрая выше медленной — восходящий тренд, быстрая ниже — нисходящий) сочетается с ретестом быстрой EMA: цена должна проколоть быструю EMA против тренда, а затем закрыться обратно на стороне тренда. Это закрытие и есть сигнал. Логика торговли Условия входа в лонг: 1. Быстрая EMA выше медленной EMA (восходящий тренд). 2. За последние несколько баров цена проколола быструю EMA вниз (настоящий откат, а не рыночный шум). 3. Текущая свеча закрывается обратно выше быстрой EMA, подтверждая, что ретест завершён и тренд возобновляется. Когда все три условия совпадают, индикатор рисует ярлык BUY и сразу же размечает четыре ценовых уровня: вход, стоп-лосс, тейк-профит и безубыток — каждый в виде линии с "живым" ценником у правого края для удобной постановки ордера. Условия входа в шорт зеркальны: быстрая EMA ниже медленной, прокол быстрой EMA вверх, и закрытие обратно ниже неё. Если цена в данный момент находится между двумя скользящими средними (не выше и не ниже отчётливо), новый сигнал не рассматривается — этот фильтр "нейтральной зоны" не даёт индикатору гнаться за сигналами на "рваном", неопределившемся рынке. После срабатывания сетап остаётся открытым (сначала как отложенный ордер, затем как активная сделка после достижения цены входа), пока не будет закрыт по стопу, по тейку, по тайм-ауту или отменён встречным сигналом — в каждый момент времени открыт только один сетап на направление, и встречный сигнал автоматически отменяет текущий активный. Управление риском Стоп-лосс никогда не рассчитывается "на глаз". Доступны три метода расчёта: • Свинг (high/low): стоп ставится на ближайший минимум/максимум в пределах окна поиска. • ATR: стоп ставится на расстоянии, кратном среднему истинному диапазону (ATR) от цены входа — автоматически подстраивается под текущую волатильность инструмента. • Процент от цены: фиксированное процентное расстояние от цены входа. Независимо от выбранного метода, жёсткий лимит риска (в % от цены) не позволяет стопу оказаться неоправданно далеко — например, из-за одиночного аномального фитиля или сбойного тика в данных биржи. У режима "Свинг" есть дополнительный, чувствительный к волатильности предохранитель (максимальное отклонение в множителях ATR), поскольку "сырые" свинг-хаи/лоу сильнее всего подвержены искажению одной нетипичной свечой. Тейк-профит рассчитывается как кратное исходному риску значение ("R-множитель"), а отдельная линия безубытка показывает, на каком уровне цены имеет смысл задуматься о переводе стопа в точку входа — потому что в системе возврата-к-тренду вроде этой, как только цена проходит примерно 1R в вашу пользу, вероятность отката обратно к скользящей средней (вместо чистого продолжения до полного тейка) возрастает, поэтому защита сделки на безубытке — разумная практика. Двойная система панелей Панель статистики — отслеживает каждый сигнал, сгенерированный индикатором на текущем графике, и разбивает результаты на исходы "тейк-профит", "стоп-лосс" и "безубыток" (стоп, сработавший после того как цена уже коснулась уровня безубытка, считается отдельно от "чистого" стоп-лосса, поскольку на практике к этому моменту вы, скорее всего, уже перевели бы стоп). Статистику можно фильтровать по всей истории, последним N дням или с конкретной даты — удобно для быстрой оценки того, насколько хорошо текущие настройки работают на конкретном инструменте, прежде чем начинать торговать по нему. Сканер монет — позволяет отслеживать до пяти других выбранных активов на предмет точно такой же ситуации в реальном времени, не покидая текущий график. По каждому активу показывается, есть ли сейчас отложенный или уже активный сигнал, в каком направлении, а также его уровни входа/стопа/тейка. Важно: сканер использует те же настройки стратегии (периоды скользящих средних, метод расчёта стопа, R-множитель и т.д.), что заданы для основного графика — отдельной настройки под каждый актив в сканере нет. Применение 1. Откройте нужный актив и таймфрейм и посмотрите на панель статистики — высокий процент выигрышных сделок и стабильное R:R говорят о том, что рынок сейчас достаточно чисто трендовый для входов по возврату к средней. 2. Если недавний винрейт высокий, рынок соблюдает структуру скользящих средних, и сетап стоит торговать. Если он снижается, рынок может входить в фазу консолидации — лучше дождаться, пока тренд снова выровняется. 3. Используйте отрисованные линии входа/стопа/тейка/безубытка и их ценники для постановки реального ордера. 4. Когда цена достигает отметки безубытка, стоит рассмотреть перевод реального стоп-лосса в точку входа — это решение, на которое индикатор указывает, но не выполняет автоматически. 5. Используйте сканер монет, чтобы следить за другими активами из вашего вотчлиста, не переключаясь постоянно между графиками. Описание настроек General (Общие настройки) • Source — ценовой ряд, по которому рассчитываются обе скользящие средние (по умолчанию — цена закрытия). Moving Average • MA fast — период быстрой EMA (по умолчанию 50). • MA fast line width — толщина линии быстрой EMA. • MA slow — период медленной EMA (по умолчанию 200). • MA slow line width — толщина линии медленной EMA. • Bull color / Bear color — цвет каждой линии MA и заливки между ними (окрашивается в зависимости от текущего направления тренда). Strategy • MA Pierce Check Window (bars) — сколько последних баров проверяется на предмет реального прокола быстрой EMA перед закрытием-ретестом (по умолчанию 3). • Swing Point Lookback (bars) — окно поиска ближайшего свинг-хая/лоу для режима стопа "Свинг", а также используется как часть "прогрева" перед тем, как индикатор начнёт оценивать сигналы (по умолчанию 10). • Take Profit, R (risk multiple) — целевое расстояние тейк-профита, выраженное как множитель исходного риска (по умолчанию 3 = 3R). • Max Bars in Open Setup (timeout) — если сигнал не резолвится (не задет ни стоп, ни тейк) за это количество баров, он принудительно закрывается и учитывается отдельно как тайм-аут, а не остаётся открытым бесконечно (по умолчанию 300). • Stop Loss Calculation Method — выбор между Свинг (high/low), ATR или Процент от цены. • ATR Length — период усреднения для расчёта ATR (по умолчанию 14). • ATR Multiplier for Stop — множитель ATR, применяемый, когда метод стопа — ATR (по умолчанию 1.5). • Stop, % of Entry Price — фиксированное расстояние стопа, используется только в режиме "Процент от цены" (по умолчанию 1%). • Max Allowed Risk, % of Price — жёсткий лимит расстояния стопа, применяется независимо от выбранного режима, для защиты от аномальных свечей или сбойных тиков в данных (по умолчанию 5%). • Also Cap Swing Stop by ATR (recommended) — дополнительный, чувствительный к волатильности предохранитель, работающий только в режиме "Свинг", теснее и отзывчивее плоского процентного лимита. • Max Swing Stop Deviation, x ATR — множитель для указанного выше лимита (по умолчанию 3). • Move to Breakeven, R (risk multiple) — расстояние в R, на котором рисуется линия отметки безубытка (по умолчанию 1 = 1R). Visualization • Show BUY/SELL Labels — вкл/выкл ярлыков сигналов на графике. • Show SL/TP/BE Price Tags on Lines — вкл/выкл "живых" ценников у правого края каждой линии уровня. • Fill Risk/Reward Zones — вкл/выкл закрашенных зон риска/прибыли. • BUY Label Color / SELL Label Color — цвета ярлыков сигналов. • Entry Line Color / Stop Loss Line Color / Take Profit Line Color / Breakeven Line Color — цвета четырёх линий уровней. • Reward Zone Color / Risk Zone Color — цвета закрашенных зон. • Entry/SL/TP Line Width — толщина линий уровней. Statistics • Show Statistics Panel — вкл/выкл таблицы статистики на графике. • Panel Position — угол графика, в котором рисуется таблица. • Text Size — размер шрифта таблицы. • Statistics Period — вся история, последние N дней или с фиксированной даты. • N Days Back — используется, если период статистики — "последние N дней". • Start Date — используется, если период статистики — "с фиксированной даты". Symbol Scanner • Show Scanner for Other Symbols — вкл/выкл таблицы сканера. • Symbol 1–5 — пять отслеживаемых активов. • Scanner Timeframe — таймфрейм для сканирования; оставьте пустым, чтобы использовать таймфрейм текущего графика. • Scanner Panel Position — угол графика, в котором рисуется таблица сканера. • Scanner Panel Text Size — размер шрифта таблицы сканера. Алерты Индикатор включает два готовых условия для алертов — Buy signal и Sell signal — которые срабатывают один раз на закрытии бара и содержат в тексте сообщения цену входа, стоп-лосс, тейк-профит и расстояние до них в тиках, так что действовать по ним можно, не открывая график. Отказ от ответственности Этот индикатор — инструмент для технического анализа и планирования сделок, он не является финансовой рекомендацией, а прошлая эффективность сигналов, показанная на панели статистики, не гарантирует результатов в будущем. Всегда сочетайте его использование с собственным управлением риском и оценкой рыночного контекста.

Chỉ báo

của Newtrader189

Pivot Sniper Method [trade_w_samet]🎯 Pivot Sniper Method Pivot Sniper Method is a confirmed pivot-reversal, signal-quality, session-filtering, trade-mapping, alert, and loaded-history statistics indicator designed to convert confirmed price pivots into a structured chart-review workflow. The script is built around one central idea: Not every confirmed pivot should be treated as an equal-quality reversal setup. Instead of displaying every pivot as an identical signal, Pivot Sniper Method evaluates each confirmed pivot through a five-part Signal Strength model, applies the selected directional and session rules, maps a complete Entry / Stop Loss / TP1 / TP2 / TP3 structure, manages optional Break-Even behavior, and records the result through an internal R-based tracker. When an eligible pivot is confirmed, the script can: • Display a confirmed BUY or SELL label • Show the calculated Signal Strength percentage directly below the direction label • Evaluate Pivot Distance, Wick Quality, Confirmation Candle, Volume Participation, and Trend Alignment • Apply Bullish, Bearish, or Both directional bias • Restrict new signals to London, New York, London + New York, All Sessions, or a Custom session • Apply an adjustable signal cooldown • Calculate the Entry at the confirmation-candle close • Calculate Stop Loss using ATR, Pivot Level, Pivot + ATR Buffer, or Signal Candle • Calculate independently adjustable TP1, TP2, and TP3 targets • Move the active Stop Loss to Break-Even after TP1 or TP2 • Add an optional favorable Break-Even tick offset • Replace the current active tracked trade when a new eligible signal appears • Display active Entry, Stop / Break-Even, TP1, TP2, and TP3 lines and labels • Remove the separate Entry line and label after Break-Even becomes active • Display compact tooltips containing signal, price, risk, target, and status information • Track Trades, Win Rate, NET R, Average R, TP1 / TP2 / TP3 hit rates, and Break-Even results • Display a compact premium desktop dashboard • Display a reduced Phone Mode dashboard • Move the dashboard to any chart corner • Support Auto, Dark, Light, and Phone visual modes • Support static alertcondition() events • Support one combined “Any alert() function call” workflow • Include symbol, timeframe, strength, Entry, Stop, targets, Stop Loss mode, Break-Even mode, and session context in dynamic alerts The purpose of the script is to provide a transparent framework for studying confirmed pivots, setup quality, session context, predefined risk, multiple reward targets, Break-Even behavior, and bar-based historical outcomes. It is not financial advice. It is not an automated trading system. It does not execute broker orders. It does not calculate position size. It does not guarantee that a confirmed pivot will produce a reversal. It does not guarantee that historical Win Rate or NET R will continue in future market conditions. It does not include spread, commission, slippage, latency, financing, taxes, partial fills, or broker-specific execution. It does not reconstruct the exact intrabar path inside historical candles. ━━━━━━━━━━━━━━━━━━━━━━ 📌 OVERVIEW ━━━━━━━━━━━━━━━━━━━━━━ At a high level, Pivot Sniper Method performs the following sequence: • Searches price for confirmed pivot lows and pivot highs. • Requires the selected number of completed candles on the right side of a pivot. • Rejects simultaneous bullish and bearish pivot confirmation on the same calculation. • Evaluates the selected Trend Bias. • Evaluates the selected Trading Session. • Evaluates the signal cooldown. • Calculates a 0–100 Signal Strength score. • Rejects signals below the selected minimum strength when the strength filter is enabled. • Displays a BUY or SELL label only when all active signal rules pass. • Opens a tracked trade at the close of the confirmation candle. • Selects a Stop Loss using the active Stop Loss Mode. • Uses ATR as a safety fallback when a structural Stop Loss is invalid. • Calculates TP1, TP2, and TP3 from the actual Entry-to-Stop risk distance. • Tracks target and stop touches from the candle after entry. • Moves the active Stop Loss to Break-Even after the selected target condition. • Replaces an active tracked trade at the current close when a new eligible signal appears. • Records each completed trade in R. • Updates a compact dashboard with state, trade, performance, and quality information. • Generates static and dynamic TradingView alert events. The script does not use machine learning. It does not claim to predict every market reversal. Its dashboard is not TradingView Strategy Tester. Its statistics are calculated internally from the script’s own confirmed-signal, OHLC-touch, replacement-exit, and Break-Even rules. ━━━━━━━━━━━━━━━━━━━━━━ 🧠 CORE IDEA ━━━━━━━━━━━━━━━━━━━━━━ A pivot low identifies a price point that is lower than the selected number of candles on both sides. A pivot high identifies a price point that is higher than the selected number of candles on both sides. Confirmed pivots can provide useful reversal context, but a pivot alone does not answer: • whether the setup agrees with the selected directional bias • whether the setup occurs during the selected trading session • whether the pivot candle contains a meaningful rejection wick • whether price has moved sufficiently away from the confirmed pivot • whether the confirmation candle supports the intended direction • whether volume participation is elevated or ordinary • whether price and the selected EMA structure support the direction • where Stop Loss should be placed • how the trade should be mapped in R • when Break-Even should become active • how a new signal should affect an existing tracked trade • how the setup behaved under the script’s historical bar-touch rules Pivot Sniper Method therefore treats the pivot as the first stage of a complete process rather than the final decision. The complete workflow is: potential pivot → right-side pivot confirmation → same-bar conflict rejection → directional-bias validation → session validation → cooldown validation → five-part quality scoring → minimum-strength validation → BUY or SELL signal → confirmation-candle Entry → Stop Loss selection → TP1 / TP2 / TP3 mapping → active-trade management → optional Break-Even → TP3, Stop, Break-Even, or replacement exit → internal R result → dashboard update → alert event ━━━━━━━━━━━━━━━━━━━━━━ 🧩 WHY THIS IS NOT A SIMPLE PIVOT MARKER ━━━━━━━━━━━━━━━━━━━━━━ A basic pivot script can stop after placing a shape on a confirmed swing high or swing low. Pivot Sniper Method continues beyond pivot detection. Each eligible setup passes through a coordinated structure: confirmed price pivot → 0–100 quality evaluation → bias and session permission → structured Entry → selectable Stop Loss model → independent TP1, TP2, and TP3 targets → optional Break-Even transition → live target-status updates → active-trade replacement logic → historical R accounting → compact statistics dashboard → static and dynamic alerts The pivot module defines the confirmed reversal location. The Signal Strength module evaluates quality. The Trend Bias module controls permitted directions. The Time Filter controls when new setups may be accepted. The trade-mapping module converts the setup into explicit price levels. The Break-Even module changes active risk only after the selected target is confirmed. The statistics module summarizes the exact results produced by those rules. The alert module communicates signal and trade-management events. These modules are not unrelated indicators placed together. They form one process for identifying, filtering, mapping, monitoring, and reviewing confirmed pivot-reversal setups. ━━━━━━━━━━━━━━━━━━━━━━ ⚙️ HOW THE SCRIPT WORKS ━━━━━━━━━━━━━━━━━━━━━━ The script runs directly on the main price chart. It calculates confirmed price pivots using independently adjustable left-side and right-side lengths for highs and lows. The default pivot configuration is: • Pivot High Left Bars: 10 • Pivot High Right Bars: 10 • Pivot Low Left Bars: 10 • Pivot Low Right Bars: 10 The signal engine then combines: • confirmed pivot status • Bullish / Bearish / Both bias permission • selected session permission • Signal Strength threshold • cooldown permission • same-bar dual-pivot rejection • confirmed chart-bar status A BUY signal is based on a confirmed pivot low. A SELL signal is based on a confirmed pivot high. The signal label is placed on the confirmation candle, not on the original historical pivot candle. The Entry is also stored at the close of the confirmation candle. This separation is important: Pivot Price The historical swing level that became confirmed after the selected right-side bars. Signal Candle The later candle where the script knows the pivot exists and all active filters pass. Entry Price The close of that later signal-confirmation candle. ━━━━━━━━━━━━━━━━━━━━━━ 🔍 PIVOT DETECTION MODEL ━━━━━━━━━━━━━━━━━━━━━━ Pivot High Left Bars determines how many candles to the left must have lower highs than a potential pivot high. Pivot High Right Bars determines how many completed candles must form to the right before the potential pivot high is confirmed. Pivot Low Left Bars determines how many candles to the left must have higher lows than a potential pivot low. Pivot Low Right Bars determines how many completed candles must form to the right before the potential pivot low is confirmed. Higher left and right values generally identify larger and less frequent swing structures. Lower values generally identify smaller and more frequent structures. The high and low settings are independent. This allows users to study symmetrical configurations such as 10 / 10 for both directions, or asymmetrical configurations when market behavior requires different sensitivity for pivot highs and pivot lows. The central pivot calculation is: float confirmedPivotHigh = ta.pivothigh( high, leftHighInput, rightHighInput ) float confirmedPivotLow = ta.pivotlow( low, leftLowInput, rightLowInput ) bool rawBuySignal = barstate.isconfirmed and not na(confirmedPivotLow) bool rawSellSignal = barstate.isconfirmed and not na(confirmedPivotHigh) These functions return a confirmed pivot value only after the required right-side bars exist. A confirmed pivot does not automatically become a signal. It must still pass: • same-bar conflict rejection • Trend Bias • Trading Session • Signal Strength • cooldown ━━━━━━━━━━━━━━━━━━━━━━ ⏳ PIVOT CONFIRMATION AND SIGNAL TIMING ━━━━━━━━━━━━━━━━━━━━━━ This section is essential for correct interpretation. The script uses confirmed pivot functions. A pivot is not known on the original pivot candle. For example, with Pivot Low Right Bars set to 10: • the potential pivot low occurs • ten additional candles must complete to its right • the pivot becomes confirmed on the later calculation candle • the BUY candidate can then be evaluated The signal label is displayed on the later confirmation candle. The trade Entry is stored at the close of that confirmation candle. The script does not backdate the BUY or SELL trade label to the original pivot candle. This means: • the pivot price belongs to an earlier historical candle • the signal becomes available later • the displayed Entry reflects the later confirmation close • increasing right-side bars increases confirmation delay • decreasing right-side bars confirms smaller structures earlier The script also requires barstate.isconfirmed for raw pivot candidates. Signals are therefore based on completed chart candles. This reduces unfinished current-candle changes, but it does not remove the inherent delay required by pivot confirmation. ━━━━━━━━━━━━━━━━━━━━━━ 🟢 CONFIRMED BUY LOGIC ━━━━━━━━━━━━━━━━━━━━━━ A BUY candidate begins when a pivot low is confirmed. The candidate is rejected when a pivot high is also confirmed on the same calculation. The remaining BUY candidate must satisfy: • Trend Bias is Bullish or Both • the selected Trading Session is active • the BUY Signal Strength meets the minimum threshold when filtering is enabled • the cooldown is ready • the chart bar is confirmed When accepted, the script displays: ▲ BUY strength% The strength percentage appears on the second line to keep the label compact. The compact two-line BUY label is constructed as: string buyLabelText = showStrengthOnSignalInput ? "▲ BUY " + str.tostring(buySignalStrength) + "%" : "▲ BUY" The SELL label uses the mirrored ▼ SELL format. The label is placed below the signal candle. The BUY tooltip can display: • Confirmed BUY • Signal Strength • Confirmed Pivot price The tracked Entry is the signal-confirmation candle close. The BUY Stop Loss is placed below Entry using the selected Stop Loss Mode. TP1, TP2, and TP3 are calculated above Entry from the actual Entry-to-Stop risk distance. ━━━━━━━━━━━━━━━━━━━━━━ 🔴 CONFIRMED SELL LOGIC ━━━━━━━━━━━━━━━━━━━━━━ A SELL candidate begins when a pivot high is confirmed. The candidate is rejected when a pivot low is also confirmed on the same calculation. The remaining SELL candidate must satisfy: • Trend Bias is Bearish or Both • the selected Trading Session is active • the SELL Signal Strength meets the minimum threshold when filtering is enabled • the cooldown is ready • the chart bar is confirmed When accepted, the script displays: ▼ SELL strength% The strength percentage appears on the second line. The label is placed above the signal candle. The SELL tooltip can display: • Confirmed SELL • Signal Strength • Confirmed Pivot price The tracked Entry is the signal-confirmation candle close. The SELL Stop Loss is placed above Entry using the selected Stop Loss Mode. TP1, TP2, and TP3 are calculated below Entry from the actual Entry-to-Stop risk distance. ━━━━━━━━━━━━━━━━━━━━━━ 💪 SIGNAL STRENGTH MODEL ━━━━━━━━━━━━━━━━━━━━━━ Signal Strength is a 0–100 quality score. The final score contains five components worth up to 20 points each: 1. Pivot Distance 2. Wick Quality 3. Confirmation Candle 4. Volume Participation 5. Trend Alignment The score is intended to compare the internal characteristics of confirmed pivot setups under the same script rules. It is not a probability forecast. A 75% label does not mean there is a guaranteed 75% probability of profit. It means the setup received 75 points out of the script’s 100-point quality model. The Minimum Signal Strength input controls the required score. Default: 55 When the filter is enabled: • scores below the minimum are rejected • scores equal to or above the minimum are eligible • lower thresholds generally create more signals • higher thresholds generally create fewer signals The strength percentage can be hidden from the BUY / SELL label without disabling the strength filter. The five component values are combined into the final score: int buySignalStrength = int(math.round( math.min( buyPivotDistanceScore + buyWickScore + buyCandleScore + volumeScore + buyTrendScore, 100.0 ) )) int sellSignalStrength = int(math.round( math.min( sellPivotDistanceScore + sellWickScore + sellCandleScore + volumeScore + sellTrendScore, 100.0 ) )) A score is therefore the sum of five internal measurements, capped at 100. ━━━━━━━━━━━━━━━━━━━━━━ 📏 PIVOT DISTANCE COMPONENT ━━━━━━━━━━━━━━━━━━━━━━ Pivot Distance evaluates how far the confirmation-candle close is from the confirmed pivot relative to ATR. For BUY candidates, the model measures the distance from the confirmed pivot low to the current close. For SELL candidates, it measures the distance from the current close to the confirmed pivot high. The normalized value is capped internally. The maximum contribution is 20 points. This component does not claim that a larger distance is always better. It only measures the amount of price separation used by this quality model. ━━━━━━━━━━━━━━━━━━━━━━ 🕯️ WICK QUALITY COMPONENT ━━━━━━━━━━━━━━━━━━━━━━ Wick Quality evaluates the rejection wick on the original pivot candle. For BUY candidates: • lower wick size is compared with the full pivot-candle range For SELL candidates: • upper wick size is compared with the full pivot-candle range A larger relevant wick can contribute more points, up to 20. This component attempts to represent rejection behavior at the confirmed swing. A large wick does not guarantee reversal continuation. ━━━━━━━━━━━━━━━━━━━━━━ 📊 CONFIRMATION CANDLE COMPONENT ━━━━━━━━━━━━━━━━━━━━━━ The Confirmation Candle component evaluates the candle where the pivot becomes confirmed and the signal is processed. The model considers: • body size relative to the full candle range • bullish close direction for BUY candidates • bearish close direction for SELL candidates The body ratio contributes most of the component score. A directional close can add an additional internal bonus. The maximum contribution is 20 points. The confirmation candle is not the original pivot candle. ━━━━━━━━━━━━━━━━━━━━━━ 🔊 VOLUME PARTICIPATION COMPONENT ━━━━━━━━━━━━━━━━━━━━━━ Volume Participation compares current volume with an adjustable volume average. Default volume length: 20 Higher relative volume can contribute more points, up to 20. The component is internally capped. When usable volume data is unavailable, the script applies a neutral fallback contribution instead of automatically assigning zero. Volume behavior differs across asset classes and data feeds. For some symbols, displayed volume can represent exchange volume. For others, it can represent tick activity or a provider-specific value. ━━━━━━━━━━━━━━━━━━━━━━ 📈 TREND ALIGNMENT COMPONENT ━━━━━━━━━━━━━━━━━━━━━━ Trend Alignment uses an adjustable EMA. Default EMA length: 50 For BUY candidates, the component evaluates: • whether price is above the EMA • whether the EMA is rising For SELL candidates, it evaluates: • whether price is below the EMA • whether the EMA is falling Each condition contributes part of the 20-point component. This EMA is used as one component of Signal Strength. It is not a separate hard directional filter. A setup can still receive points from the other four components when Trend Alignment is weak. ━━━━━━━━━━━━━━━━━━━━━━ 🧭 TREND BIAS ━━━━━━━━━━━━━━━━━━━━━━ Trend Bias controls which signal directions are permitted. Available modes: • Bullish • Bearish • Both Bullish Allows only confirmed BUY signals. Bearish Allows only confirmed SELL signals. Both Allows confirmed signals in both directions. Trend Bias does not change pivot detection. It changes which confirmed candidates are allowed to become signals and tracked trades. The final signal gate combines pivot confirmation, directional permission, session permission, Signal Strength, and cooldown: bool buySignal = buyCandidate and bullishBiasAllowed and timeFilterPassed and buyStrengthPassed and cooldownReady bool sellSignal = sellCandidate and bearishBiasAllowed and timeFilterPassed and sellStrengthPassed and cooldownReady Only candidates that pass every active condition become BUY or SELL signals. ━━━━━━━━━━━━━━━━━━━━━━ 🕒 SESSION FILTER ━━━━━━━━━━━━━━━━━━━━━━ The Trading Session input controls when new signals can be accepted. Available modes: • All Sessions • London • New York • London + New York • Custom London uses: 08:00–17:00 Europe/London time New York uses: 09:30–16:00 America/New_York time London + New York accepts signals during either defined session. Custom allows the user to define a session and select: • Exchange • UTC • Europe/London • America/New_York • Europe/Istanbul • Asia/Tokyo The session filter affects new entries only. An already active tracked trade continues to be managed outside the selected session. The dashboard displays whether the current session rule is OPEN or CLOSED. ━━━━━━━━━━━━━━━━━━━━━━ ⏳ COOLDOWN AND CONFLICT HANDLING ━━━━━━━━━━━━━━━━━━━━━━ Signal Cooldown Bars defines the minimum number of completed candles required between accepted signals. Default: 0 A value of 0 disables additional cooldown filtering. Higher values reduce how frequently new signals can be accepted. When a pivot high and pivot low are both confirmed on the same calculation, the script rejects both candidates. This prevents contradictory BUY and SELL signals from being accepted on the same candle. ━━━━━━━━━━━━━━━━━━━━━━ 🎯 ENTRY AND ACTIVE-TRADE REPLACEMENT MODEL ━━━━━━━━━━━━━━━━━━━━━━ The Entry is stored at the close of the accepted signal candle. The script maintains one active tracked trade. However, new eligible signals are not ignored while a trade is active. When a new eligible BUY or SELL signal appears: • the current active trade is valued at the new signal candle’s close • its current R result is added to statistics • its active lines and labels are removed • the new signal opens a new tracked trade This behavior applies to eligible same-direction and opposite-direction signals. The replacement exit is not a broker fill. It is an internal close-based accounting rule used to keep only one active tracked trade. Because replacement exits can occur before TP3, Stop Loss, or Break-Even, NET R can include partial positive or negative R outcomes. ━━━━━━━━━━━━━━━━━━━━━━ 🛑 STOP LOSS SYSTEM ━━━━━━━━━━━━━━━━━━━━━━ The script includes four Stop Loss modes: • ATR • Pivot Level • Pivot + ATR Buffer • Signal Candle ATR BUY: Entry − ATR × multiplier SELL: Entry + ATR × multiplier Default ATR length: 14 Default ATR multiplier: 2.0 Pivot Level BUY: confirmed pivot low SELL: confirmed pivot high Pivot + ATR Buffer BUY: confirmed pivot low − ATR × pivot buffer SELL: confirmed pivot high + ATR × pivot buffer Default pivot buffer: 0.25 ATR Signal Candle BUY: signal candle low SELL: signal candle high The script validates the selected Stop Loss. For BUY, Stop Loss must be meaningfully below Entry. For SELL, Stop Loss must be meaningfully above Entry. When the selected structural stop is invalid, the script uses the ATR Stop Loss as a safety fallback. The actual risk distance is: absolute difference between Entry and the validated Stop Loss That distance becomes 1R for all target calculations. The requested Stop Loss is selected from the active mode: requestedStopPrice := stopLossModeInput == "ATR" ? activeEntryPrice - atrFallbackDistance : stopLossModeInput == "Pivot Level" ? confirmedPivotLow : stopLossModeInput == "Pivot + ATR Buffer" ? confirmedPivotLow - atrValue * pivotBufferATRInput : low For SELL trades, the same logic is mirrored above Entry. The script then validates the requested structural stop. When the selected price is not on the correct side of Entry, ATR is used as the fallback. ━━━━━━━━━━━━━━━━━━━━━━ 🏆 TP1 / TP2 / TP3 SYSTEM ━━━━━━━━━━━━━━━━━━━━━━ TP1, TP2, and TP3 are independently adjustable. Default values: • TP1: 1R • TP2: 2R • TP3: 3R For BUY: target = Entry + risk distance × selected R multiple For SELL: target = Entry − risk distance × selected R multiple TP1 and TP2 are intermediate target events. TP3 is the final target and closes the active tracked trade. When TP3 is touched: • TP1 is also recorded if it was not already recorded • TP2 is also recorded if it was not already recorded • TP3 is recorded • the trade closes at the selected TP3 R value Users should normally keep: TP1 < TP2 < TP3 The script allows independent values, so users are responsible for maintaining a logical target sequence. After the validated Stop Loss is stored, the script defines 1R and calculates each target: activeRiskDistance := math.max( math.abs(activeEntryPrice - activeStopPrice), syminfo.mintick ) activeTP1Price := activeTradeDirection == 1 ? activeEntryPrice + activeRiskDistance * tp1RRInput : activeEntryPrice - activeRiskDistance * tp1RRInput activeTP2Price := activeTradeDirection == 1 ? activeEntryPrice + activeRiskDistance * tp2RRInput : activeEntryPrice - activeRiskDistance * tp2RRInput activeTP3Price := activeTradeDirection == 1 ? activeEntryPrice + activeRiskDistance * tp3RRInput : activeEntryPrice - activeRiskDistance * tp3RRInput The target calculations therefore remain proportional to the actual Entry-to-Stop distance. ━━━━━━━━━━━━━━━━━━━━━━ 🟡 BREAK-EVEN SYSTEM ━━━━━━━━━━━━━━━━━━━━━━ Break-Even Mode includes: • Off • After TP1 • After TP2 After TP1 The Stop Loss moves to Entry after the TP1-touch candle closes. After TP2 The Stop Loss moves to Entry after the TP2-touch candle closes. The updated Break-Even stop applies from the following candle. An optional favorable tick offset can be added. For BUY: Break-Even = Entry + offset For SELL: Break-Even = Entry − offset When Break-Even becomes active: • the Stop Loss line changes to the Break-Even color • the Stop label changes from SL to BE • the separate Entry line is deleted • the separate Entry label is deleted • only the BE level remains at or near Entry This prevents Entry and Break-Even labels from overlapping at the same price. A Break-Even stop with zero offset produces approximately 0R. A positive favorable offset can produce a small positive R result. ━━━━━━━━━━━━━━━━━━━━━━ ⚠️ SAME-CANDLE STOP AND TARGET HANDLING ━━━━━━━━━━━━━━━━━━━━━━ Historical OHLC candles do not reveal the exact sequence of all intrabar price movement. A candle can include both the active Stop price and one or more target prices. When the active Stop and a target are both touched inside the same historical candle, the script uses a conservative rule: The active Stop receives priority. This applies to the original Stop Loss and the active Break-Even stop. Trade-management checks begin on the candle after Entry. The Entry candle cannot immediately close the new tracked trade. The conservative priority rule can produce different results from lower-timeframe reconstruction or tick-level execution data. ━━━━━━━━━━━━━━━━━━━━━━ 📐 ACTIVE TRADE VISUAL SYSTEM ━━━━━━━━━━━━━━━━━━━━━━ While a tracked trade is active, the script can display: • Stop Loss or Break-Even line • Entry line • TP1 line • TP2 line • TP3 line • Stop Loss or Break-Even label • Entry label • TP1 label • TP2 label • TP3 label The lines project to the right by the selected number of bars. Default: 20 bars Stop and Entry use solid lines. Targets use dashed lines. After TP1 or TP2 is reached: • the corresponding target label changes to a completed state • the corresponding line becomes more transparent After Break-Even activates: • the Entry line and Entry label disappear • the active Stop line and label become BE When the trade closes or is replaced: • active trade lines are deleted • active trade labels are deleted The script does not preserve completed trade lines as permanent historical drawings. ━━━━━━━━━━━━━━━━━━━━━━ 🏷️ LABELS, TOOLTIPS, AND TEXT ━━━━━━━━━━━━━━━━━━━━━━ BUY and SELL labels use two lines when strength display is enabled: direction strength% Available Label Size values: • Tiny • Small • Normal • Large • Huge The setting controls: • BUY • SELL • Entry • Stop Loss • Break-Even • TP1 • TP2 • TP3 Phone Mode overrides the selected label size with Tiny. Visible chart labels use bold and italic formatting. Signal tooltips can show: • direction • strength • pivot price Trade-level tooltips can show: • Entry strength • risk distance • Stop Loss mode • Stop or BE price • target R value • target price • target status • Break-Even tick offset Tooltips are informational chart elements. They do not represent broker orders. ━━━━━━━━━━━━━━━━━━━━━━ 📟 COMPACT PREMIUM DASHBOARD ━━━━━━━━━━━━━━━━━━━━━━ The desktop dashboard is divided into four sections: STATE • symbol and timeframe • active signal and strength • current trade status • session status TRADE • active Stop Loss mode • Entry and Stop / Break-Even • TP1 / TP2 / TP3 scale • live R PERFORMANCE • total trades started • closed trades • Win Rate • NET R • Average R • TP1 / TP2 / TP3 hit rates QUALITY • latest strength • Trend component • Volume component • Wick component • Confirmation Candle component • Pivot Distance component • Trend Bias • Break-Even mode • Minimum Strength Quality components are displayed in a compact format: T = Trend V = Volume W = Wick C = Candle P = Pivot Distance The dashboard can be positioned at: • Top Right • Bottom Right • Top Left • Bottom Left The selected input is translated into a TradingView table position: string dashboardTablePosition = dashboardPositionInput == "Top Right" ? position.top_right : dashboardPositionInput == "Top Left" ? position.top_left : dashboardPositionInput == "Bottom Left" ? position.bottom_left : position.bottom_right if barstate.islast table.set_position( statisticsTable, dashboardTablePosition ) ━━━━━━━━━━━━━━━━━━━━━━ 📊 STATISTICS METHODOLOGY ━━━━━━━━━━━━━━━━━━━━━━ The statistics are produced by the script’s internal bar-based tracker. They are not imported from a broker. They are not verified account results. They are not TradingView Strategy Tester results. Total Trades Started Number of accepted signals that opened a tracked trade. Total Trades Closed Number of tracked trades closed by: • Stop Loss • Break-Even • TP3 • active-trade replacement TP1 Hit Rate TP1 touches divided by Total Trades Started. TP2 Hit Rate TP2 touches divided by Total Trades Started. TP3 Hit Rate TP3 touches divided by Total Trades Started. NET R Sum of all recorded closed-trade R outcomes. Average R NET R divided by Total Trades Closed. Win Rate Positive-R trades divided by positive-R plus negative-R trades. Exact 0R Break-Even results are excluded from the Win Rate denominator. A favorable Break-Even offset can produce a small positive R result and can therefore be classified as a positive-R trade. Replacement exits use the close of the new signal candle and can contribute partial R. Statistics depend on: • loaded chart history • symbol • timeframe • exchange or broker feed • left and right pivot settings • Trend Bias • session setting • cooldown • strength threshold • EMA and volume lengths • ATR settings • Stop Loss mode • target settings • Break-Even settings • replacement-signal sequence Changing any of these inputs can change historical results. ━━━━━━━━━━━━━━━━━━━━━━ 🎨 THEME SYSTEM ━━━━━━━━━━━━━━━━━━━━━━ The script includes: • Auto • Dark Mode • Light Mode • Phone Mode Auto Detects the chart background and selects the corresponding light or dark visual palette. Dark Mode Uses: • darker green and red signal colors • dark dashboard surfaces • white chart-label text • dark Entry color • muted dashboard text • red brand header Light Mode Uses: • brighter green and red signal colors • light dashboard surfaces • dark BUY text where required • adjusted Entry and dashboard colors • red brand header Theme selection changes presentation. It does not change pivot detection, Signal Strength, trade levels, statistics, or alerts. ━━━━━━━━━━━━━━━━━━━━━━ 📱 PHONE MODE ━━━━━━━━━━━━━━━━━━━━━━ Phone Mode is designed for smaller chart areas. It uses: • Tiny signal labels • Tiny active-trade labels • one-pixel trade-level lines • dark visual palette • compact dashboard text • reduced dashboard rows The Phone Mode dashboard displays: • Signal and Strength • Status • Win Rate and NET R • Session The compact layout intentionally removes most desktop details. Phone Mode changes presentation only. It does not change calculations. ━━━━━━━━━━━━━━━━━━━━━━ 🚨 ALERT SYSTEM ━━━━━━━━━━━━━━━━━━━━━━ The script includes static TradingView alert conditions for: • Confirmed BUY • Confirmed SELL • Stop Loss Hit • Break-Even Activated • Break-Even Hit • TP1 Hit • TP2 Hit • TP3 Hit Static BUY and SELL messages can include: • exchange • ticker • timeframe • Signal Strength • Entry • Stop • TP1 • TP2 • TP3 The script also includes dynamic alert() events for: • BUY signal • SELL signal • Stop Loss hit • Break-Even activation • Break-Even hit • TP1 hit • TP2 hit • TP3 hit Dynamic signal messages can include: • trade_w_samet identifier • event type • direction • symbol • timeframe • Signal Strength • Entry • Stop • TP1 • TP2 • TP3 • Stop Loss Mode • Break-Even Mode • Trading Session • session OPEN / CLOSED state Dynamic trade-management messages preserve the active trade’s stored values before the trade state is reset. Alert events use once-per-bar-close frequency. A dynamic signal message is assembled from the stored trade values: string buyEntryAlertMessage = "trade_w_samet | Pivot Sniper Method" + " Event: BUY SIGNAL" + " Direction: BUY" + " Symbol: " + syminfo.tickerid + " Timeframe: " + timeframe.period + " Strength: " + str.tostring(buySignalStrength) + "%" + " Entry: " + str.tostring(activeEntryPrice, format.mintick) + " SL: " + str.tostring(activeStopPrice, format.mintick) + " TP1: " + str.tostring(activeTP1Price, format.mintick) + " TP2: " + str.tostring(activeTP2Price, format.mintick) + " TP3: " + str.tostring(activeTP3Price, format.mintick) alert( message=buyEntryAlertMessage, freq=alert.freq_once_per_bar_close ) The complete live message also includes Stop Loss Mode, Break-Even Mode, and session context. Alerts are monitoring tools. They do not execute or modify broker orders. ━━━━━━━━━━━━━━━━━━━━━━ 🔔 HOW TO USE ALERTS ━━━━━━━━━━━━━━━━━━━━━━ For a specific static event: 1. Add Pivot Sniper Method to the chart. 2. Open TradingView’s Create Alert window. 3. Select the indicator as the condition. 4. Select the required BUY, SELL, Stop, Break-Even, TP1, TP2, or TP3 event. 5. Select the notification method. 6. Test the alert before relying on it. For one combined dynamic workflow: 1. Add the indicator to the chart. 2. Open Create Alert. 3. Select Pivot Sniper Method . 4. Select Any alert() function call. 5. Configure the delivery method. 6. Test signal and trade-management messages. TradingView saves a snapshot of the script, its inputs, and chart context when an alert is created. After materially changing the script, symbol, timeframe, or inputs, delete and recreate the alert so it uses the intended configuration. ━━━━━━━━━━━━━━━━━━━━━━ 🧪 PRACTICAL WORKFLOW ━━━━━━━━━━━━━━━━━━━━━━ A practical review process: 1. Add Pivot Sniper Method to a standard candlestick chart. 2. Select Auto, Dark, Light, or Phone Mode. 3. Start with symmetrical pivot settings. 4. Observe how right-side bars affect confirmation delay. 5. Select Both Trend Bias when studying raw signal behavior. 6. Select Bullish or Bearish when reviewing one direction only. 7. Begin with All Sessions when studying general behavior. 8. Test London, New York, or Custom session filtering. 9. Begin with the default Minimum Signal Strength. 10. Compare signal frequency at higher and lower thresholds. 11. Review the strength percentage below each BUY or SELL label. 12. Use the tooltip to inspect the confirmed pivot price. 13. Compare the five quality components in the dashboard. 14. Select the preferred Stop Loss Mode. 15. Verify that the structural stop is logically positioned. 16. Review the ATR fallback behavior. 17. Set TP1, TP2, and TP3 in increasing order. 18. Select the Break-Even rule. 19. Review when the Entry label disappears and BE replaces it. 20. Observe how new eligible signals replace an active tracked trade. 21. Review Live R and historical NET R. 22. Review failed setups as well as successful setups. 23. Create and test alerts. 24. Define personal position size independently. 25. Account for spread, commission, liquidity, news, and execution conditions. The indicator is designed for structured study and monitoring. It should not be treated as an automatic decision-maker. ━━━━━━━━━━━━━━━━━━━━━━ ⚙️ SETTINGS REFERENCE ━━━━━━━━━━━━━━━━━━━━━━ 📈 Trend Bias Trend Bias • Bullish • Bearish • Both ━━━━━━━━━━━━━━━━━━━━━━ ⚙️ Pivot Settings Pivot High Left Bars Default: 10 Pivot High Right Bars Default: 10 Pivot Low Left Bars Default: 10 Pivot Low Right Bars Default: 10 ━━━━━━━━━━━━━━━━━━━━━━ 🚨 Signal Settings Show BUY / SELL Signals Shows or hides signal labels. Signal Cooldown Bars Default: 0 ━━━━━━━━━━━━━━━━━━━━━━ 🕒 Time Filter Trading Session • All Sessions • London • New York • London + New York • Custom Custom Session Default: 08:00–17:00 Custom Session Time Zone • Exchange • UTC • Europe/London • America/New_York • Europe/Istanbul • Asia/Tokyo ━━━━━━━━━━━━━━━━━━━━━━ 💪 Signal Strength Enable Signal Strength Filter Default: On Minimum Signal Strength Default: 55 Show Strength on Signal Default: On Strength Trend Length Default: 50 Strength Volume Length Default: 20 ━━━━━━━━━━━━━━━━━━━━━━ 📦 Trade Levels Show Active Trade Levels Default: On Stop Loss Mode • ATR • Pivot Level • Pivot + ATR Buffer • Signal Candle ATR Length Default: 14 Stop Loss ATR Multiplier Default: 2.0 Pivot ATR Buffer Default: 0.25 TP1 Risk / Reward Default: 1.0R TP2 Risk / Reward Default: 2.0R TP3 Risk / Reward Default: 3.0R Level Projection Bars Default: 20 ━━━━━━━━━━━━━━━━━━━━━━ 🟡 Break-Even Break-Even Mode • Off • After TP1 • After TP2 Default: After TP1 Break-Even Offset Ticks Default: 0 ━━━━━━━━━━━━━━━━━━━━━━ 📊 Statistics Dashboard Show Statistics Dashboard Default: On Dashboard Position • Top Right • Bottom Right • Top Left • Bottom Left ━━━━━━━━━━━━━━━━━━━━━━ 🎨 Visual Settings Theme Mode • Auto • Dark Mode • Light Mode • Phone Mode Label Size • Tiny • Small • Normal • Large • Huge Phone Mode always uses Tiny. ━━━━━━━━━━━━━━━━━━━━━━ 🔔 Alert Settings Enable BUY Alerts Default: On Enable SELL Alerts Default: On Enable Dynamic Alerts Default: On All public input values are hidden from TradingView’s status line to reduce chart-header clutter. ━━━━━━━━━━━━━━━━━━━━━━ 🧠 WHAT MAKES THIS SCRIPT ORIGINAL ━━━━━━━━━━━━━━━━━━━━━━ Pivots, ATR, EMA, volume comparison, session filters, risk/reward levels, Break-Even, alerts, and performance statistics are established technical-analysis concepts. These concepts are not unique by themselves. The originality of Pivot Sniper Method lies in the coordinated implementation applied to them: confirmed high and low pivots → same-bar directional-conflict rejection → Bullish / Bearish / Both permission → session filtering → cooldown → five-part 0–100 quality model → minimum-quality acceptance → compact two-line BUY / SELL labels → confirmation-close Entry → four selectable Stop Loss models → ATR structural-stop validation fallback → independently adjustable TP1 / TP2 / TP3 → target-state visual updates → TP1- or TP2-based Break-Even → Entry-to-BE visual replacement → active-trade replacement at current close → internal partial-R accounting → desktop and Phone dashboards → theme-aware colors → dashboard-corner selection → detailed static and dynamic alerts Distinctive implementation features include: • using five quality dimensions inside one pivot-reversal workflow • separating pivot confirmation from Entry timing • using the original pivot candle for wick quality • using the later confirmation candle for candle quality and Entry • applying session control only to new entries • supporting four Stop Loss construction methods • validating structural stops and falling back to ATR when required • removing the Entry visual after Break-Even replaces it • tracking replacement exits in R • showing latest quality components in a compact dashboard • supporting both individual events and one combined dynamic-alert workflow The script is not a collection of unrelated indicators. Every component supports the same objective: evaluating and managing a confirmed pivot-reversal setup under explicit, reviewable rules. ━━━━━━━━━━━━━━━━━━━━━━ ⚠️ IMPORTANT PRACTICAL NOTES ━━━━━━━━━━━━━━━━━━━━━━ Signal frequency depends on: • symbol • timeframe • data provider • pivot left and right settings • Trend Bias • selected session • cooldown • minimum strength • EMA length • volume length • ATR availability • historical data availability Higher right-side pivot values increase confirmation delay. Higher strength thresholds reduce accepted signals. Session filtering can remove otherwise valid setups. The strength score is not a probability forecast. The Trend component is part of the score, not a separate hard trend filter. The script replaces an active tracked trade when a new eligible signal appears. The script does not retain completed trade lines historically. Dashboard statistics use loaded chart history only. Different exchanges, brokers, and data feeds can produce different: • highs • lows • closes • pivots • wick measurements • volume values • ATR values • EMA values • signals • stop levels • target levels • replacement exits • historical statistics Changing available history can change the first eligible setup and later active-trade sequencing. ━━━━━━━━━━━━━━━━━━━━━━ ⚠️ LIMITATIONS AND SHORTCOMINGS ━━━━━━━━━━━━━━━━━━━━━━ This script has important limitations. It does not guarantee profitable trades. It does not predict future price movement with certainty. It does not execute orders. It does not place broker Stop Loss orders. It does not place broker Take Profit orders. It does not calculate position size. It does not calculate account risk. It does not include spread. It does not include commission. It does not include slippage. It does not include latency. It does not include swap or financing. It does not include taxes. It does not model partial fills. It does not model order rejection. It does not model contract specifications. It does not model tick-by-tick execution. It uses historical OHLC bars. It cannot always determine whether Stop or target occurred first inside one candle. It resolves same-candle ambiguity in favor of the active Stop. It begins trade-management checks on the candle after Entry. It requires right-side pivot confirmation. It cannot identify a confirmed pivot on the original pivot candle. It can react with delay when larger right-side values are used. It rejects simultaneous high and low pivot confirmation. It can reject setups through bias, session, strength, or cooldown rules. It replaces an active tracked trade when a new eligible signal appears. A replacement exit can close a trade before its mapped Stop or TP3. Its Signal Strength is an internal score, not a probability. Its volume component depends on available volume data. Its dashboard is not Strategy Tester. Its statistics are not audited. Its Win Rate excludes exact 0R Break-Even results. A positive Break-Even offset can classify a BE hit as positive R. Its target hit rates use total trades started. Its statistics depend on loaded chart history. Changing settings recalculates historical behavior. Alerts depend on TradingView and user configuration. Alerts do not guarantee broker execution. ━━━━━━━━━━━━━━━━━━━━━━ 👤 WHO THIS SCRIPT MAY BE USEFUL FOR ━━━━━━━━━━━━━━━━━━━━━━ This script may be useful for traders who: • understand pivot confirmation • want BUY and SELL signals based on confirmed price pivots • prefer a quality score instead of equal treatment for every pivot • want separate Bullish and Bearish direction controls • want London, New York, or Custom session filtering • want selectable ATR or structural stops • want independently adjustable R targets • want TP1- or TP2-based Break-Even • want active trade levels on the chart • want compact tooltips • want loaded-history R statistics • want a compact desktop dashboard • want a reduced Phone Mode • want detailed TradingView alerts • understand that historical chart results are not verified execution It may be less suitable for users who: • want signals on the original unconfirmed pivot candle • want no pivot delay • want tick-level backtesting • want multiple simultaneous tracked trades • want new signals ignored while a trade is active • want historical completed-trade lines preserved • want automatic broker execution • want position sizing • want commission and slippage modeling • want guaranteed reversal signals • interpret Signal Strength as win probability • expect historical Win Rate to continue unchanged ━━━━━━━━━━━━━━━━━━━━━━ 🧭 BEST-PRACTICE SUGGESTIONS ━━━━━━━━━━━━━━━━━━━━━━ For studying pivot sensitivity: • begin with equal high and low pivot settings • compare smaller and larger left / right values • remember that right-side values directly affect delay For studying raw signal behavior: • use Both Trend Bias • use All Sessions • use a moderate minimum strength • review every accepted BUY and SELL For directional study: • use Bullish or Bearish • compare results separately • do not assume one direction will remain superior For session-based review: • compare All Sessions with London or New York • use the exchange’s actual liquidity characteristics • remember that active trades remain managed outside the session For Signal Strength: • begin with 55 • compare frequency at 45, 55, and 65 • review the five components • do not interpret the percentage as guaranteed probability For risk mapping: • begin with ATR 14 and 2.0 multiplier • compare ATR with Pivot Level • compare Pivot Level with Pivot + ATR Buffer • maintain logical TP1 < TP2 < TP3 values For Break-Even: • compare Off with After TP1 • test After TP2 for wider trade development • keep the tick offset realistic for the instrument For chart clarity: • use Auto for general use • use Dark or Light when manual control is preferred • use Phone Mode on smaller screens • move the dashboard away from important price action • adjust label size according to chart density Always: • wait for confirmed signals • review broader market structure • review liquidity and volatility • review news risk • define personal account risk • calculate position size independently • test the exact symbol, timeframe, and data feed • inspect failed trades as well as successful trades • recreate alerts after important configuration changes ━━━━━━━━━━━━━━━━━━━━━━ 🔓 PUBLICATION NOTE ━━━━━━━━━━━━━━━━━━━━━━ Pivot Sniper Method is published as an educational pivot-confirmation, signal-quality, session-filtering, risk-mapping, Break-Even, statistics, and alert tool. The purpose of this description is to explain: • how pivots are confirmed • why signals appear after the original pivot • how BUY and SELL candidates are formed • how simultaneous pivot conflicts are rejected • how Trend Bias affects eligibility • how session filtering affects new entries • how cooldown affects frequency • how the five Signal Strength components work • why Signal Strength is not a probability • how Entry is defined • how each Stop Loss Mode works • how invalid structural stops fall back to ATR • how TP1, TP2, and TP3 are calculated • how Break-Even activates • why Entry disappears after BE becomes active • how same-candle Stop / target ambiguity is handled • how active trades are replaced by new eligible signals • how internal R statistics are calculated • what the dashboard displays • how Phone Mode differs • what alerts include • what the script does not simulate • why historical results can change The script is designed to support structured review. It does not promise profitable results. It does not remove market risk. It does not replace independent analysis. It does not replace personal risk management. ━━━━━━━━━━━━━━━━━━━━━━ 🕒 REPAINTING, BACKPLOTTING, AND TIMING DISCLOSURE ━━━━━━━━━━━━━━━━━━━━━━ Pivot Sniper Method uses confirmed price pivots. Pivot confirmation requires future candles relative to the original pivot location. The number of required right-side candles is controlled independently for pivot highs and pivot lows. The script does not know that a pivot exists on the original pivot candle. After the required right-side candles complete: • the pivot becomes confirmed • the candidate is evaluated • Signal Strength is calculated • filters are applied • the BUY or SELL label can appear on the confirmation candle • the tracked Entry can open at the confirmation-candle close The BUY or SELL trade label is not plotted back on the original pivot candle. The Entry is not backdated. Signals require confirmed chart bars. This reduces unfinished current-bar variation. It does not remove: • pivot confirmation delay • differences between historical OHLC and tick sequence • data-feed differences • changes caused by settings • changes caused by loaded history • market risk Historical results can change when: • pivot settings change • Trend Bias changes • session settings change • cooldown changes • strength settings change • ATR settings change • Stop Loss Mode changes • target settings change • Break-Even settings change • symbol changes • timeframe changes • exchange or broker feed changes • available chart history changes Users should interpret the original pivot price as historical structure and the later BUY / SELL candle as the actual confirmed signal timing. ━━━━━━━━━━━━━━━━━━━━━━ 🛡️ DISCLAIMER ━━━━━━━━━━━━━━━━━━━━━━ Pivot Sniper Method is provided for educational and informational purposes only. It does not constitute financial, investment, trading, legal, accounting, or tax advice. No indicator can guarantee future results. Markets are uncertain. Price structure changes. Volatility changes. Liquidity changes. Volume behavior changes. Session behavior changes. Historical chart behavior does not ensure future performance. Every user is responsible for their own: • analysis • validation • symbol selection • timeframe selection • pivot settings • directional bias • session selection • quality threshold • Stop Loss selection • target planning • Break-Even selection • position sizing • risk management • alert configuration • trading decisions • broker execution • legal obligations • tax obligations The pivots, BUY labels, SELL labels, Signal Strength values, Entry levels, Stop Loss levels, Break-Even levels, TP1 levels, TP2 levels, TP3 levels, active lines, labels, tooltips, dashboard values, Win Rate, NET R, Average R, target hit rates, and alerts are visual analysis tools only. A confirmed pivot is not a guaranteed reversal. A high Signal Strength value is not a guaranteed winning trade. A TP label is not proof of an actual broker fill. A Stop Loss event is not proof of an actual broker fill. The dashboard is not verified account performance. The statistics are not audited. The script does not include spread, commission, slippage, latency, financing, taxes, partial fills, order rejection, position sizing, account equity, or broker-specific execution. Use the script as a structured pivot-reversal review, trade-mapping, and monitoring framework—not as a promise of profitability or a substitute for independent judgment.

Chỉ báo

của tradewsamet

Session Liquidity Architecture [MQLSoftware]Session Liquidity Architecture reads the trading day as a repeating structure of sessions — and instead of restating fixed session folklore, it measures how the instrument on your chart actually behaves inside that structure. Most session tools draw boxes and stop there. This indicator adds three algorithmic elements on top of the session-box base, and every number it prints is derived from the chart's own history. Key Features Self-calibrating session range model — every completed session range is ranked as a percentile of that session's own trailing distribution. The active session shows a live read: current range, % of its median, and the percentile it has already reached. No pip or point thresholds, no magic numbers — the model adapts to any symbol and timeframe by construction. Session liquidity state machine — each session's High and Low arm at session close and are then tracked through explicit states: armed → swept → rejected or accepted. A sweep is only registered on a confirmed bar; the rejection read compares the sweep bar's close against the level. Levels that survive until the next same-session open are marked expired. Measured base rates — the panel reports observed frequencies from the loaded history: how often London actually sweeps the Asia High or Low on this chart, how often New York sweeps the London extremes, and how often price closes back inside after each sweep. These are counted events with the sample size shown (n), not assumptions — and below a minimum sample the panel says "collecting" instead of quoting a percentage. Three configurable sessions (Asia, London, New York) with per-session IANA timezones, so daylight-saving shifts are handled automatically. Previous Day High / Low tracked through the same armed → swept state machine. Day separators, per-session colors, and a compact statistics panel. Core Concept — what is original here Session boxes are common. The original contribution of this script is that it treats the session map as a measurement problem : 1. Percentile-ranked session ranges. A "big" or "quiet" session is only meaningful relative to that session's own recent distribution. Ranking the live range against the last N completed ranges of the same session produces a self-calibrating expansion read that works identically on FX majors, indices, or crypto — without any instrument-specific settings. 2. A liquidity state machine instead of static lines. Session extremes are treated as objects with a lifecycle (armed, swept, rejected/accepted, expired). Because state transitions happen only on confirmed bars, the sweep history you see on the chart is exactly the history the statistics are built from. 3. Base rates instead of narratives. The common claims about session behavior ("London takes out the Asia range", "the sweep reverses") become testable numbers here. A counted event is strictly defined: a sweep is the first confirmed-bar break of an armed level while the later session is active, and it counts as "rejected" when the sweep bar closes back inside the level. On some instruments the measured frequencies are strongly asymmetric; on others (for example 24/7 crypto) they hover near a coin flip — and the panel will honestly show you that. The point is to replace assumption with measurement on the exact chart you trade. Anatomy of the Display Session boxes — one box per session per day, labelled with the session name; completed boxes append the final range and its percentile (e.g. "LONDON 0.00421 · P63"). Level lines — each session's High/Low extends right from the moment it arms at session close. A red ✕ mark shows where it was swept. Untouched levels turn dotted when they expire at the next same-session open. PDH / PDL — dashed lines for the previous day's extremes, same sweep marking. Statistics panel — one row per session (live or last range + percentile, and the state of its levels; states shown during a live session are prefixed "prev" because they belong to the previous cycle), followed by the measured base-rate block with sample sizes. Notes on Repainting Sweep events, rejection reads, base-rate counters and all alerts fire on confirmed bars only and do not repaint. Session boxes, the live range and the live percentile update intrabar while a session is open — they are visual context for the current session, not signals. No security() calls, no lookahead: everything is computed from the chart's own bars. Boxes and level lines are drawing objects anchored to past bars by design (a session box spans its session, a level line starts at the bar of the extreme). This affects only how history is displayed, never the event logic. Typical Analysis Workflow Check the panel: how much of its typical range has the active session already used? A session at 40% of median is quiet by its own history; one at P90 has already been unusually wide for that session. These numbers describe the distribution so far — they do not predict what the next bar will do. Watch the armed levels from the prior session and the previous day: they are the objective reference points the state machine is tracking. When a sweep prints, read the rejection/acceptance tag and compare it with the measured base rate for that exact scenario on this chart. Configuration Session hours and timezone per session (defaults: Tokyo 09:00–18:00 JST, London 08:00–17:00 UK, New York 09:30–16:00 ET). Futures/FX traders can widen them or repurpose a slot as a killzone. Rendering depth, box transparency, day separators, PDH/PDL on/off. Sweep marks: Minimal (small ✕ text) or Pill, and how many days of marks to keep. Stats lookback (sessions) for the percentile model; panel position and text size. Markets and Timeframes Intraday timeframes only (the script tells you if the chart is not intraday). Best readability from 5m to 1h. Works on FX, indices, futures, stocks and crypto — on 24/7 markets the session definitions matter more than the defaults, so adjust the hours to your venue. Alerts Liquidity swept — any session extreme or PDH/PDL taken (confirmed bar). The alert() message names the exact level and outcome, e.g. "EURUSD 60 — liquidity swept: ASIA H (rejected)". Session range expansion — the active session crossed the 80th percentile of its own history. Session opened. This is a visual analytical tool for chart reading and session-structure context. It does not generate buy/sell signals, does not execute trades, and does not provide financial advice.

Chỉ báo

của MQLSoftware

FVG Crossfire GENERAL OVERVIEW: FVG Crossfire identifies and plots the exact price bands where a bullish and a bearish imbalance have overlapped. These overlap bands, called crossfire zones, are the only objects the indicator draws. Ordinary Fair Value Gaps are tracked in the background as inputs, but a standalone gap is never rendered on the chart; a zone is created only when a fresh FVG overlaps an older, still-unfilled FVG of the opposite direction. From that point the zone remains on the chart, reversing direction each time an opposing FVG overlaps it, recording each transition with a star counter, marking every retest with an arrow, and being removed only when price trades fully through it. What is the theory behind the indicator? A Fair Value Gap records a price imbalance: price moved quickly enough that a gap was left between the wicks of the surrounding candles. The problem is that FVGs are common. On a fast chart dozens print every session, most of them noise, and drawing them all obscures the few levels that actually matter. FVG Crossfire is built on a stricter criterion: the event worth displaying is the overlap. When a new imbalance prints in the opposite direction directly on top of an older, still-unfilled one, that price band is no longer one-sided; buyers have left an imbalance there, and now sellers have as well (or the reverse). That overlap marks a contested level, one the market has already reacted to from both directions. The sequence often continues. Each additional opposing FVG flips the zone again, and because a flip keeps only the portion of the zone where the imbalances actually overlap, the contested band becomes tighter and more precise with each transition. What remains is a narrow, repeatedly tested level with a visible history, which is among the strongest forms of support or resistance an imbalance structure can produce. The FVG Crossfire indicator includes 5 main features: FVG CROSSFIRE FEATURES Crossfire Zone Detection Zone Flipping & Flip Counter Retest Detection Zone Mitigation Alerts CROSSFIRE ZONE DETECTION: 🔹What Is a Crossfire Zone? A crossfire zone is the price band shared by two opposite imbalances: an older, still-unfilled Fair Value Gap and a newly formed FVG in the opposite direction that printed on top of it. The zone covers only the overlap, and it takes the direction and color of the newer FVG, the most recent side to print. An optional "origin funnel" draws converging lines from the older gap into the zone, so the source of the overlap remains visible. 🔹What Is a Fair Value Gap? For background: an FVG is a three-candle pattern where the middle candle moves so strongly that a gap is left between the first candle and the third: the low of candle three above the high of candle one (bullish), or the high of candle three below the low of candle one (bearish). In this indicator FVGs are inputs, not output: they are detected and tracked entirely in the background, and one that never overlaps an opposite gap is discarded without ever being drawn. 🔹Why Are Crossfire Zones Important? A single gap indicates one-sided aggression at a price. A crossfire zone indicates that both sides were aggressive at the same prices and disagreed. These contested bands tend to attract price repeatedly, which makes them stronger candidates for support, resistance, and reaction trades than any single gap. And because only overlaps are drawn, every object on the chart is already a filtered, higher-significance level. 🔹How Crossfire Zones Are Detected: Every candle close, the engine scans the last three candles for a new FVG (gaps smaller than your minimum size are skipped, and candles around daily or weekly session breaks are excluded so overnight gaps don't create false patterns). Each stored gap is also tracked as later candles fill it (by wick or by close, depending on the setting), and a fully filled gap is dropped from the pool. When a fresh FVG confirms, it is compared against every waiting opposite gap: wherever it overlaps the unfilled part of one, a crossfire zone is created on the overlap and the origin funnel appears. Every FVG participates exactly once; after creating (or flipping) a zone it is consumed, so one price move never produces duplicate zones. Live zones extend to the right edge of the chart, and an optional "Combine" mode merges same-direction zones that overlap in price into one bigger zone. 🔹Settings: Base FVG Group (the detection engine) Base FVG mitigation: whether wicks or only candle closes fill a waiting gap before it can participate in an overlap. Min FVG gap (% of price): ignore gaps below this size; 0 keeps every gap. Show origin funnel: draw the converging lines from the source gap into its zone. Border, Style, Colors: visual control of the funnel; color transparency sets the fill strength. 🔹Settings: Crossfire Zone Group Lookback (candles): zones are only built inside the most recent N candles (default 3000); every zone created in the window is shown. Border, Style, Midline: outline and optional equilibrium line for each zone. Bullish / Bearish colors: transparency sets the zone fill strength. Combine overlapping zones: merge same-color zones that overlap in price. ZONE FLIPPING & FLIP COUNTER: 🔹What Is a Zone Flip? If a live crossfire zone is overlapped by another FVG in the opposite direction, the zone flips: the current box is frozen in place and a new, opposite-colored box continues from that point. Read left to right, a flipped zone forms a timeline of directional control over that price band. 🔹Why Do Flips Matter? Every flip is another change of direction at the same level, evidence that the market continues to react to that price. And because each flip keeps only the part of the zone that the new FVG actually overlapped, the contested band tightens with every flip. A zone that has flipped three times is a narrow, precise, repeatedly contested level, exactly the kind of area worth planning trades around. 🔹How the Flip Counter Works: Each live zone shows a star counter on its edge at the latest candle: green stars touching the bottom edge of bullish zones, red stars touching the top edge of bearish zones. One star means the zone has formed once, two stars means one flip, and so on; zones with five or more entries display a compact count instead (for example "6 ★"). There is no limit on flips; the chain only ends when the zone is fully mitigated. RETEST DETECTION: 🔹What Is a Retest? A retest is price leaving a live crossfire zone and then coming back to touch it again. The indicator marks every single retest: a small green ▲ below the candle that re-entered a bullish zone, a small red ▼ above the candle that re-entered a bearish zone. 🔹Why Are Retests Important? The retest is usually the tradeable moment. A contested zone holding on a return visit is the confirmation many traders wait for before entering, and repeated successful retests indicate the level continues to hold. 🔹How Retests Are Detected: On every candle close, the indicator checks whether the candle touched the zone (any wick contact counts) while the previous candle did not. Each fresh re-entry counts; price must leave the zone before the next retest can register, so a candle sitting inside the zone for several bars only counts once. Every retest can also fire an alert. 🔹Settings: Retest markers: show or hide the ▲/▼ arrows. ZONE MITIGATION: 🔹What Is Zone Mitigation? A crossfire zone is complete (fully mitigated) when price trades all the way through it: through the bottom of a bullish zone, or through the top of a bearish zone. At that point the zone and its whole flip history are removed from the chart, or kept and faded out if you prefer to study them. 🔹Why Does Mitigation Matter? A zone that price has completely passed through has served its purpose: the imbalance on both sides is resolved. Removing finished zones keeps the chart focused on levels that still matter, while the optional faded view lets you review how past zones resolved. 🔹How Mitigation Is Detected: You choose what counts as trading through the far side: any wick, or only a candle close. Until that happens, the zone stays live no matter how many times it flips or gets retested. 🔹Settings: Zone mitigation: Wick or Close. Show mitigated zones: keep finished chains on the chart, frozen and dimmed. ALERTS: FVG Crossfire covers the full life of a zone with four alert events, each with its own on/off switch. Create one alert on the indicator using "Any alert() function call" and every enabled event will come through with the symbol and timeframe in the message: New crossfire zone: two opposite FVGs overlapped and a new zone was created. Zone flipped: a live zone changed direction (bullish ↔ bearish). Zone retested: price re-entered a live zone after being outside it (fires on every re-entry). Zone mitigated: a zone was fully traded through and completed. IMPORTANT NOTES: Plain FVGs are never drawn. Gaps are tracked in the background, and a gap only becomes visible, through its origin funnel, at the moment it produces a crossfire zone. Every object drawn on the chart is already an overlap. All detections are evaluated on candle close. Zones, flips, retests, and mitigations are confirmed events; they do not repaint. Background gaps are filled on a three-candle delay. This is deliberate: the same impulsive move that creates the new FVG is often the move that fills the old one, and without the delay the overlap could never be detected. Each FVG participates exactly once. After creating or flipping a zone it is consumed, so one price move never produces duplicate zones. A flip requires the new FVG to overlap the currently visible zone, and the flipped zone keeps only the overlapping part; zones tighten as they flip. A retest requires price to leave the zone first. Consecutive candles inside the zone count as one visit. Candles around daily and weekly session breaks are excluded from gap detection so overnight gaps don't create false patterns. Internal drawing limits keep the script within TradingView's object budget; on extremely gap-dense charts the oldest zones are released first. UNIQUENESS: Most FVG tools draw every gap and leave the trader to determine which ones matter; inversion (IFVG) tools go one step further and record a single change of direction. FVG Crossfire does not draw ordinary gaps at all. It uses them purely as inputs and puts only one thing on the chart: the price bands where opposite imbalances have overlapped, and it then tracks the full lifecycle of each contested level. Zones flip an unlimited number of times, each previous state freezes into a left-to-right timeline, the band tightens to the true overlap on every flip, a star counter records the number of transitions, every individual re-entry is flagged with a retest arrow and alert, and the level is only removed when price fully trades through it. The result is not another gap plotter: it is a filtered map of where opposing imbalances keep forming at the same prices, how many transitions each level has recorded, and exactly how tight the contested band has become.

Chỉ báo

của fluxchart

3D Trend Vortex [BOSWaves]3D Trend Vortex - Slope-Adaptive Gradient Bands with Polyline 3D Extrusion and Zone Entry Signal Detection Overview 3D Trend Vortex is a slope-driven trend band system that constructs a pair of eight-layer gradient bands positioned above and below price using ATR-scaled offsets from a configurable moving average baseline, where band width breathes inversely with slope magnitude, candle gradient intensity reflects normalized slope strength, and a polyline-based three-dimensional extrusion renders the outer and inner band edges as volumetric ribbon geometry that follows the bands across the configured display length. Instead of relying on static symmetric bands or fixed volatility channels, the band width contracts when trend slope is strong and expands when slope is flat or weakening, producing a visual breathing effect that communicates momentum intensity through band geometry rather than through a separate indicator. The eight gradient fill layers within each band progress from near-transparent at the inner edge to full opacity at the outer edge, creating a visual depth effect that reinforces the three-dimensional extrusion rendered at the current bar. This creates a trend framework where every visual layer simultaneously communicates the same underlying information from a different angle. The gradient bands reveal momentum intensity through their width. The candle gradient communicates slope conviction through brightness. The 3D extrusion at the band edges provides spatial depth cues that make the band structure immediately readable across varying zoom levels. Signal labels fire when price first enters either band after the cooldown period, identifying the specific bars where price has moved into the zone of interest defined by the ATR-offset band boundary. Price is therefore tracked not just for its directional relationship to the basis MA but for its position within or outside a dynamically breathing gradient band system whose visual geometry encodes slope strength and momentum quality on every bar. Conceptual Framework 3D Trend Vortex is founded on the principle that trend band visualization should communicate momentum quality through the geometric properties of the bands themselves rather than requiring separate momentum indicators, and that introducing three-dimensional spatial depth into the band rendering provides immediate structural legibility that flat two-dimensional bands cannot achieve regardless of color or transparency settings. Traditional band indicators apply fixed widths or static volatility multiples that remain visually identical whether momentum is surging or stalling, requiring traders to consult separate oscillators for conviction context. This framework embeds conviction directly into band geometry through the breathing width mechanism, where strong slope produces tighter, more concentrated bands reflecting focused directional commitment and weak slope produces wider, more diffuse bands reflecting reduced momentum quality. The three-dimensional extrusion layer adds spatial depth cues that reinforce the structural separation between the supply zone above price and the demand zone below. Three core principles guide the design: Band width should adapt to slope magnitude, contracting during strong momentum and expanding during low-conviction conditions, encoding trend health directly into the geometric properties of the bands without requiring a separate momentum indicator. The gradient fill system across eight layers within each band should provide visual depth that reinforces the three-dimensional extrusion, creating a consistent spatial reading between the flat fill and the extruded geometry at the current bar edge. Signals should fire on first entry into band territory after the cooldown period rather than on crossover of a single line, capturing the structural significance of price reaching the offset zone while preventing signal clustering during extended band interactions. This shifts trend band analysis from static channel monitoring into a momentum-adaptive visual system where band breathing, candle intensity, and three-dimensional geometry collectively communicate trend conviction across every bar of the display window. Theoretical Foundation The indicator combines configurable moving average baseline selection, ATR-based band offset and width calculation with slope-driven breathing modulation, eight-level gradient fill construction across inner-to-outer band subdivisions, polyline-based three-dimensional extrusion geometry using depth offset coordinates, and slope-normalized candle gradient coloring. The basis MA is computed in the selected type over the configured length and the three-bar slope is measured as the difference between current and three-bar-lagged values. The slope magnitude is normalized against its highest value over an eighty-bar window, producing a 0-1 score that drives the breathing multiplier applied to the band width. ATR is smoothed over fifty bars to reduce sensitivity to individual volatility spikes, providing a stable scaling unit for both band offset and width calculations. The eight gradient fill layers divide the inner-to-outer band distance into equal steps with progressively increasing opacity, connecting smoothly to the polyline faces of the 3D extrusion that render the outer edge face, top face, and inner top face as separate filled polygon regions at configurable depth offsets. Four internal systems operate in tandem: Slope-Adaptive Band Engine : Calculates ATR-smoothed band offset and width, applies EMA smoothing to all four band edges, and modulates total band width by a breathing factor derived from normalized slope magnitude so that bands contract proportionally during high-momentum conditions. Eight-Layer Gradient Fill System : Subdivides the inner-to-outer band width into eight equal steps and fills each interval with progressively decreasing transparency, producing a continuous opacity gradient from the near-transparent inner edge to the full-opacity outer edge across both the top and bottom bands. Three-Dimensional Extrusion Engine : On the last bar, constructs polyline polygon arrays for the outer face, top face, and inner top face of each band by combining current bar coordinates with depth-offset coordinates at the configured bar and ATR depth, rendering six filled polyline regions that create the illusion of volumetric band geometry extending from the current bar edge into the chart space. Zone Entry Signal System : Monitors price crossing into the top or bottom band on each bar, applying independent cooldown tracking for each side to prevent signal clustering during extended band interactions. This design allows band geometry, candle coloring, and 3D extrusion to all derive from the same underlying slope and ATR measurements, ensuring visual consistency across every layer of the indicator. How It Works 3D Trend Vortex evaluates price through a sequence of slope-aware band construction and visualization processes: Basis MA Calculation : The selected moving average type is calculated over the configured length, providing the directional baseline from which all band positions and slope measurements are derived. ATR Smoothing : Raw ATR over fourteen bars is smoothed with a fifty-bar SMA to produce a stable volatility unit that prevents individual spike bars from distorting band positioning across the display window. Slope Measurement and Normalization : The three-bar change in basis MA is measured and its absolute value is normalized against the highest absolute slope over eighty bars, producing a 0-1 score reflecting how strong the current slope is relative to recent momentum history. Breathing Width Calculation : The normalized slope score is scaled and subtracted from 1.0 to produce a breathing multiplier that reduces band width proportionally during high-slope conditions, causing bands to contract during strong momentum and expand during low-conviction flat conditions. Band Edge Calculation and Smoothing : Inner and outer edges for both the top and bottom bands are calculated by adding and subtracting ATR-scaled offset and width values from the basis MA, then smoothed with the configured EMA length to prevent jagged edge movement. Eight-Layer Gradient Fill Rendering : The inner-to-outer distance of each band is divided into eight equal steps and plot-fill pairs are rendered at each subdivision with transparency increasing from outer to inner, producing a smooth opacity gradient across the band depth. Candle Gradient Coloring : The normalized slope score is power-transformed and mapped to a gradient from a dimmed version of the trend color at low slope to full saturation at high slope, coloring chart candles proportionally to current momentum conviction. Zone Entry Detection : Price crossing into the top band from below or the bottom band from above is detected with independent cooldown tracking for each side. When entry is confirmed and cooldown is satisfied, a signal label is placed at the bar high or low respectively. 3D Extrusion Construction : On the last bar, polyline arrays are constructed for each of the six extruded faces using combinations of current and depth-offset bar indices and price coordinates, rendering the outer face, top face, and inner top face for both the top and bottom bands as filled polygon regions. Together, these elements form a continuously updating slope-adaptive band system where gradient geometry, candle brightness, and three-dimensional extrusion simultaneously communicate trend direction, momentum conviction, and structural band positioning across the full display window. Interpretation 3D Trend Vortex should be interpreted as a slope-driven momentum band system with spatial depth visualization and zone entry monitoring: Bullish Trend State (Green) : Active when the basis MA slope is positive, with the bottom gradient band rendered in green and candles coloring green with intensity proportional to slope strength. Bearish Trend State (Red) : Active when the basis MA slope is negative, with the top gradient band rendered in red and candles coloring red with intensity proportional to slope strength. Band Width Dynamics : Narrow bands indicate strong slope momentum with high directional conviction. Wide bands indicate weak slope with reduced momentum quality. Monitoring band width evolution provides real-time conviction context without requiring a separate momentum oscillator. Eight-Layer Gradient Fill : The opacity gradient from inner to outer edge provides visual depth within each band, with the near-transparent inner boundary representing the threshold where price enters the zone of interest and the fully opaque outer boundary representing the extreme of the ATR-scaled offset distance. 3D Extrusion : The three-dimensional polyline faces rendered at the current bar edge provide spatial depth cues that reinforce the structural separation between the top supply zone and bottom demand zone, making band positioning immediately readable across varying chart zoom levels. ▲ Buy Signals : Green upward triangles mark the first bar where price enters the bottom band after the cooldown period, identifying price reaching the lower ATR-offset zone of interest. ▼ Sell Signals : Red downward triangles mark the first bar where price enters the top band after the cooldown period, identifying price reaching the upper ATR-offset zone of interest. Candle Gradient : Price candles brighten toward full trend color saturation as slope strengthens and dim toward a muted version of the trend color as slope weakens, providing bar-level momentum conviction readings directly on the candlestick display. Band width dynamics, candle gradient intensity, signal zone entry, and 3D extrusion depth collectively provide more momentum and structural context than any element in isolation. Signal Logic & Visual Cues 3D Trend Vortex presents two zone entry signal types with independent cooldown enforcement: Buy Signal (▲) : Green triangle placed below the bar when price first closes below the bottom band inner edge after the configured cooldown period has elapsed since the previous buy signal, identifying price entry into the lower ATR-offset demand zone. Sell Signal (▼) : Red triangle placed above the bar when price first closes above the top band inner edge after the configured cooldown period has elapsed since the previous sell signal, identifying price entry into the upper ATR-offset supply zone. Independent per-side cooldown tracking prevents consecutive signals on the same side while allowing the opposite side to signal freely, ensuring that transitions between upper and lower zone interactions are captured without artificial suppression. Alert generation covers buy and sell zone entry events for systematic monitoring workflows. Strategy Integration 3D Trend Vortex fits within momentum-informed band interaction and zone-based directional approaches: Band Width Conviction Reading : Use band width as a continuous momentum quality gauge. Entering a position during a narrow-band high-slope period indicates stronger directional conviction than entries during wide-band low-slope conditions where momentum quality is reduced. Zone Entry Signal Framework : Use buy and sell signals as structural alerts that price has reached the ATR-offset zone of interest rather than as standalone entry triggers. Evaluate slope direction and band width at the signal bar to assess whether the zone entry occurs during supporting or deteriorating momentum conditions. Candle Gradient Momentum Monitoring : Use the brightness of trend-colored candles as a bar-level momentum reading throughout the trend. Progressively brightening candles indicate strengthening slope. Dimming candles within an established trend suggest momentum deterioration before band width changes confirm it visually. 3D Extrusion Spatial Reference : Use the three-dimensional band faces at the current bar edge as a visual anchor for where the current supply and demand zones sit relative to price, with the depth extending into future chart space providing an intuitive structural reference for the zone boundaries. Basis Type Selection : Use EMA for standard responsive trend tracking. Use HMA for lower-lag applications requiring faster slope detection with minimal smoothing delay. Use WMA for weighted recent-bar emphasis. Use SMA for a simpler unweighted baseline reference. Multi-Timeframe Band Alignment : Apply higher-timeframe slope direction and band positioning as a directional bias filter, engaging with lower-timeframe zone entry signals only when they align with the established higher-timeframe momentum state. Technical Implementation Details Basis Engine : Configurable EMA, SMA, WMA, or HMA with slope measurement and normalization against eighty-bar highest absolute slope Band Construction : Smoothed ATR offset and width with slope-derived breathing modulation across four band edges Gradient System : Eight equal subdivisions between inner and outer band edges with plot-fill pairs at progressively increasing transparency 3D Extrusion : Polyline polygon arrays for outer face, top face, and inner top face of each band using depth-offset bar index and ATR height coordinates Signal Logic : Zone entry detection with independent per-side cooldown bar tracking Candle Coloring : Power-transformed slope normalization mapped to trend-color gradient Performance Profile : 3D extrusion triggered only on last bar with full polyline rebuild and cleanup each render cycle, configurable display length cap for object management Optimal Application Parameters Timeframe Guidance: 1 - 5 min : Intraday zone monitoring for scalping with shorter basis length and tighter band offset for responsive zone positioning on fast intraday momentum 15 - 60 min : Session-level momentum band tracking with balanced basis length and moderate offset for meaningful zone separation across typical intraday swings 4H - Daily : Swing-level momentum band analysis with longer basis length for sustained slope readings and wider offset reflecting larger price excursions from trend Suggested Baseline Configuration: Basis Length : 21 Basis Type : EMA Band Offset (ATR×) : 3.0 Band Width (ATR×) : 0.9 Band Smoothing : 65 3D Display Length : 400 3D Depth (Bars) : 8 3D Height (ATR×) : 0.5 Show Signals : Enabled Signal Cooldown : 20 Color Candles : Enabled (requires disabling original chart candles in chart settings) These suggested parameters should be used as a baseline; their effectiveness depends on the instrument's volatility characteristics, typical ATR range, and preferred band sensitivity, so fine-tuning is expected for optimal performance. Parameter Calibration Notes Use the following adjustments to refine behavior without altering the core logic: Bands too far from price : Decrease Band Offset to bring the inner band edge closer to price, reducing the ATR distance required for price to reach the signal zone. Bands too close to price : Increase Band Offset to push bands further from price, requiring more significant price extension before zone entry signals fire. Band width breathing too pronounced : The breathing effect scales with slope normalization. On instruments with highly variable slope the breathing range may appear extreme. Reduce Band Width to compress the overall width range and make breathing less visually dramatic. Bands too jagged or smooth : Adjust Band Smoothing to control EMA smoothing on band edges. Higher values produce smoother, more gradual band curves. Lower values produce more responsive edges that track price structure changes faster. Too many signals : Increase Signal Cooldown to enforce greater bar separation between consecutive zone entry signals on the same side, focusing attention on less frequent but more structurally spaced entries. 3D extrusion too deep or shallow : Adjust 3D Depth (Bars) to change the horizontal extent of the extruded faces and 3D Height (ATR×) to change the vertical depth of the extrusion, calibrating the spatial effect to the chart's aspect ratio and zoom level. 3D extrusion covers too many or too few bars : Adjust 3D Display Length to control how many recent bars receive the polyline extrusion rendering, reducing for performance on slower systems or increasing to extend the visual depth effect further back into price history. Adjustments should be incremental and evaluated across multiple session types rather than isolated market conditions. Performance Characteristics High Effectiveness: Trending markets with clear directional momentum where slope normalization produces meaningful band breathing dynamics and candle gradient provides reliable conviction context throughout the trend Instruments with consistent ATR behavior where the volatility-scaled band offset positions zones at structurally meaningful distances from price across varying market conditions Zone interaction strategies where price reaching the ATR-offset band boundary identifies structurally significant extension events worth monitoring for reversal or continuation behavior Visualization-focused workflows where the three-dimensional band geometry provides spatial chart reading advantages that improve structural awareness relative to flat two-dimensional bands Reduced Effectiveness: Choppy, trendless markets where slope alternates rapidly in direction, causing frequent trend color flips and band breathing that produces no sustained directional momentum context Extremely high-volatility instruments where ATR spikes push band offsets to distances so large that price rarely reaches the zone boundaries and signals become infrequent regardless of cooldown settings Low-ATR instruments where the extrusion height and band width produce visually imperceptible geometry requiring significant parameter adjustment to produce meaningful spatial depth Markets with highly irregular slope profiles where the eighty-bar normalization window consistently registers outlier slope readings that compress the breathing range for typical bars Consolidation environments where flat slope produces maximum band width expansion and near-neutral candle coloring simultaneously, reducing the visual differentiation that makes momentum context readable Integration Guidelines Confluence : Combine with BOSWaves order flow tools, structural analysis, or momentum oscillators to validate zone entry signals with broader analytical context before acting on band boundary interactions Band Breathing Awareness : Monitor band width evolution throughout established trends as a continuous slope health indicator. Progressively widening bands during a trend suggest slope is weakening and conviction is diminishing before price structure confirms the change. Candle Gradient Divergence : Watch for price extending toward the outer band while candles are simultaneously dimming, indicating momentum deterioration during price extension that may precede reversal toward the basis MA. 3D Depth Calibration : Adjust 3D Depth and Height parameters until the extrusion provides clear spatial depth without obscuring price action. The extrusion is a visualization aid and should complement rather than dominate the chart reading experience. State Discipline : Maintain directional bias aligned with current slope direction until slope reverses. Zone entry signals within the same trend direction represent extension events rather than reversal triggers and should be interpreted as monitoring alerts rather than directional change signals. Disclaimer 3D Trend Vortex is a professional-grade slope-adaptive trend visualization and zone monitoring tool. It uses moving average slope normalization with ATR-scaled breathing band construction and polyline three-dimensional extrusion but does not predict future price movements. Results depend on market conditions, instrument momentum characteristics, parameter selection, and disciplined execution. BOSWaves recommends deploying this indicator within a broader analytical framework that incorporates order flow context, structural analysis, and comprehensive risk management.

Chỉ báo

ES/NQ Daily Levels Paste-In Sup/Res Mapper Daily Levels is a manual, paste-in mapping tool. Paste a list of price levels into the settings and it draws them on your chart as clean lines and shaded zones with labels. It does not calculate signals or repaint — it simply renders the levels you enter. Works on any symbol — ES, NQ, SPY, SPX, stocks, futures, forex, and crypto. Just paste levels that match that instrument's price. Leave the box blank and it shows a few sample reference levels around current price (clearly tagged "sample", 10 points apart by default) so you can see how it works on any chart. The samples auto-hide the moment you paste your own levels. (The 10-point default spacing suits ES/NQ; for other instruments set the spacing to fit, or set it to 0 for auto.) WHAT IT DRAWS - Single prices → horizontal lines with labels - Ranges (e.g. 5200-5205) → shaded zones - Section groups you can label: Resistances, Supports, and special groups (Backtest, Add, Breakdown, Short) - Tag any level "(major)" and it renders thicker DYNAMIC S/R FLIP (optional) When enabled, each level you paste under Supports/Resistances is colored by where price is right now: - Price above the level → acts as support (green, "S") - Price below the level → acts as resistance (red, "R") - Price inside a zone → neutral / in-play (yellow) Turn it off to keep the exact section labels you pasted. HOW TO USE 1. Add the indicator to your chart. 2. Open its settings → "PASTE YOUR DAILY LEVELS HERE". 3. Paste your levels, one section per line, for example: Resistances: 5210, 5218 (major), 5225-5228 Supports: 5188, 5175 (major) 4. Lines, zones, and labels draw automatically. Colors, widths, spacing, and label styling are all configurable. NOTE The sample levels are auto-generated placeholders for demonstration only — they are not recommended levels and should not be used for trading. This tool does not generate, suggest, or predict levels; it only displays the ones you enter. For educational purpose

Chỉ báo

của janicetrades

Wonra Alchemist SNR Engine Wonra Alchemist SNR Engine An implementation of Malaysian SNR (MSNR) and the Quasimodo reversal pattern, built as one engine because in that method the pieces are not independent indicators. A level means nothing without knowing which way the story is running, and the story is told by levels. This publishes the whole reading rather than one part of it. Everything below is visible in the source. This is published open-source so the code is the final word on any of it. How levels are found Malaysian SNR ignores wicks. A level is marked by joining one candle's close to the next candle's open, and the space between those two prices is the level itself. Where the two meet you get a hairline; where they do not, the space between them never traded, and that untraded space is what the method calls a GAP. The engine treats both as one construct: a level is a band, and a gap is a band you can see. That has consequences the code follows through on: A touch registers at either edge of the band. A break requires a close through the far edge. Closing inside the band has broken nothing, because nothing in there ever traded. Levels are seeded from confirmed swings (an ATR-threshold zigzag, so minor noise does not create a level of its own) and from close-to-open gaps above a size floor. How a level earns weight Two things strengthen a level, and the second is the one most tools ignore. Touches. Price left the level, came back and was refused. Leaving is required: price hovering at a price does not add a touch every bar. Misses. Price swung toward the level and turned before reaching it. In MSNR a miss validates a level rather than doing nothing, and the reasoning is that the resting liquidity was never taken, so all of it is still there. A level with three misses is not the same as one with three taps, and the label shows them separately. Role flip (SBR / RBS) A level closed through does not disappear, it changes sides. Broken support becomes resistance and broken resistance becomes support, keeping its history. This is the SBR/RBS part of the method and it is why the chart does not empty out over a session. Quasimodo (QM / QML) The engine looks for the QM shape: a shoulder, a head beyond it, and a return. For a bullish QM the head must be a lower low than the left shoulder; the level drawn is the left shoulder, not the head, which is where the pattern is traded from. Each candidate must also produce a structure break before it is accepted, and combinations are scanned across several swings so a pattern is still found when a minor swing sits inside it. Supply zones extend up from the QM level and demand zones extend down from it, on one side only, so price is not counted as having reached a zone while it is still short of the level. Storyline (direction) MSNR determines direction from higher-timeframe levels, and the engine follows the four rules the method states: Direction comes from higher-timeframe levels, read from bodies, not from wick extremes. A storyline begins with a rejection: a close back below resistance, or back above support. It is confirmed by a breakout on a lower timeframe. The engine distinguishes the two kinds the method names — an internal breakout of a level formed after the rejection, and an external breakout of one that already existed — and reports which occurred. Levels against the established direction are roadblocks: the places pullbacks are expected to stop on the way. They are marked rather than hidden, because they are the one thing the method tells you to expect. Engulfing zones (EG / EF) An engulfing candle above a size floor creates a zone. The rule that makes it worth having is what happens when it fails: a bullish zone that price closes through becomes a failed zone read the other way, at the same prices, because that is where the other side proved itself. Broken twice and it is discarded, having now been wrong in both directions. Imbalances Three-candle gaps, drawn as neutral background. Zones spanning a market closure are discarded — a weekend is not unfinished business between buyers and sellers, it is a closed market, and it happens to leave the largest and most eye-catching gap on the chart. Scoring Confirmed patterns are scored 0-100 from what the engine already knows about them: the size of the structure, the quality of the break, whether liquidity was swept and how cleanly, whether an imbalance sits inside the zone, and how proven the levels involved are. The score sets how loudly a pattern is drawn. Nothing is deleted for scoring low. Why this is one script and not several Because in this method the parts are not separable. The storyline decides which levels are tradeable and which are roadblocks. The QM level is only a setup when it agrees with the storyline. A level's weight comes from its own touch and miss history. Splitting these into separate indicators would produce three scripts that each need the other two to say anything, which is the situation this replaces. How to use it The panel gives the current reading: storyline direction and which breakout confirmed it, how many fresh zones are live on each side, the nearest zone in ATR, and whether a confluence is being watched. Fresh zones are the tradeable ones. A zone that has been used is faded, not removed, so the history stays readable. Zone reactions are marked where they happen. A diamond marks a reaction from a level that had already proven itself. Levels against the storyline are marked RB. Expect a pause there, not a reversal. Higher timeframes for direction, lower for entry timing. The storyline timeframe is automatic and can be set manually. Credits The concepts are not mine. Malaysian SNR, the storyline structure, roadblocks, fresh and unfresh levels, the MISS, SBR/RBS and the Quasimodo entry come from Malaysian SNR and Alchemist educational material that circulates publicly. This is an implementation of that method, not a new one. The Strong FVG section is taken from "Customizable Strong FVGs" by Fleezzuss, published open-source under the Mozilla Public License 2.0. The three-candle detection, the sensitivity modes and the zone lifecycle are their work. This script is published open-source under the same licence because of it. Added on top: a gap is not drawn when it would sit on one already on the chart, so consecutive impulse candles stop stacking zones at the same price; gaps spanning a market closure are discarded, because a weekend is a closed market rather than an imbalance; and the palette is neutral so imbalances sit behind the levels instead of competing with them. Not financial advice. This is an analysis tool. It does not predict outcomes and does not tell you to buy or sell. Every level can fail.

Chỉ báo