Wskaźnik
Wskaźniki i strategie
EGADE Research-Based RSI Threshold ConfigurationEGADE Research-Based RSI Threshold Configuration is an empirical RSI decision-support indicator based on the findings of research by Hatem Mabrouk , Federico Trigos , and Francisco Valderrey , Tecnologico de Monterrey, EGADE Business School, Mexico
The underlying study systematically evaluated nine RSI threshold configurations across nine major cryptocurrencies and the S&P 500 using weekly RSI(14) data. The findings challenge the conventional assumption that the standard 30/70 configuration is universally optimal and identify asset-specific dominant threshold configurations based on win rate, geometric weekly return, and average holding period.
This indicator operationalizes those empirical findings directly within TradingView. For assets included in the study, it automatically displays the research-based RSI threshold configuration identified by the empirical analysis.
The indicator provides three display modes:
• Research-Based: Displays the empirically identified threshold configuration for the selected asset.
• Conventional 30/70: Displays the traditional RSI 30/70 configuration.
• Compare Both: Displays the research-based and conventional configurations simultaneously for direct comparison.
The indicator uses weekly RSI(14) regardless of the chart timeframe and provides visual entry and exit zones, threshold-entry markers, alerts, and an information dashboard.
Assets currently supported by the empirical research: BTC, ETH, ADA, AVAX, BNB, DOGE, SOL, TRX, XRP, and the S&P 500.
Disclaimer: The findings and information presented through this indicator are intended exclusively for academic, research, educational, and decision-support purposes. Nothing contained in the underlying study or this indicator constitutes financial or investment advice, an investment recommendation, or a solicitation to buy or sell any financial instrument. Historical empirical performance does not guarantee future results. Users should conduct their own analysis and exercise independent judgment when making financial or investment decisions.
Wskaźnik
Gabriel Expanding Triangle Wave Screener w/Targeta-b-c-d-e labels (yellow) on the five wave points; orange legs connecting them
Card rules enforced: five waves, each subsequent wave longer than the last (tunable min growth %, default 5%), diverging b-d (red) and a-e (blue) dashed rays
At e: "five waves complete — BUY ▲ / SELL ▼" with price
TARGET ZONE box after e (default 61.8–100% of the d-e leg, tunable range & length) with price notation
Full bearish mirror; alerts with entry and target zone prices
Wskaźnik
Wskaźnik
DeRell Durr Cashflow King Elite ORB System V5This script was created to trade the ORB FOR 2,5 15 minute time frames.
Wskaźnik
Stock Sniper V2HOW TO USE
This indicator combines multiple tools into one TradingView system:
✅ UT Bot main buy and sell signals
✅ Optional Sniper Entry signals
✅ Optional Fair Value Gaps
✅ ATR-based stop-loss and profit targets
✅ Optional EMA ribbon, VWAP, dashboard, and candle colors
MAIN SIGNAL SYSTEM
The UT Bot is the main signal system.
🟢 UT BUY = possible bullish entry
🔴 UT SELL = possible bearish entry
The Sniper Entry module is optional and can be used as extra confirmation.
🟢 SNIPER BUY = EMA 9 crossing above EMA 21
🔴 SNIPER SELL = EMA 9 crossing below EMA 21
RSI DOTS
🔴 Red dot below the candle = RSI oversold
🟢 Green dot above the candle = RSI overbought
Important: The RSI dot colors are intentionally reversed from traditional colors.
A red oversold dot does not automatically mean buy.
A green overbought dot does not automatically mean sell.
Use the dots as a warning that price may be stretched.
FAST SCALP SETTINGS
Recommended for 1-minute, 3-minute, or 5-minute charts.
UT Bot Settings:
Key Value: 0.7 to 1.0
ATR Period: 5 to 7
Heikin Ashi Source: Optional
UT Bar Colors: On
ATR Trailing Stop: On
Sniper Settings:
Fast EMA: 9
Slow EMA: 21
ATR Length: 7
Stop-Loss ATR Multiplier: 1.0 to 1.2
Score Confirmation: Off for more signals
Minimum Score: 57%
Optional Visuals:
EMA Ribbon: On
VWAP: On
Entry, SL, and TP Levels: On
Dashboard: Off for a cleaner chart
Fair Value Gaps: Off or only use on the 5-minute chart
BALANCED INTRADAY SETTINGS
Recommended for 5-minute or 15-minute charts.
UT Bot Settings:
Key Value: 1.0
ATR Period: 10
Heikin Ashi Source: Off
UT Bar Colors: On
ATR Trailing Stop: On
Sniper Settings:
Fast EMA: 9
Slow EMA: 21
ATR Length: 14
Stop-Loss ATR Multiplier: 1.5
Score Confirmation: On
Minimum Score: 57% to 71%
Optional Visuals:
EMA Ribbon: On
VWAP: On
Dashboard: On
Fair Value Gaps: On
FVG Extend: 20 bars
CONSERVATIVE SETTINGS
Recommended for fewer but stronger signals.
UT Bot Settings:
Key Value: 1.5 to 2.0
ATR Period: 14
Heikin Ashi Source: On
Sniper Settings:
Fast EMA: 9
Slow EMA: 21
ATR Length: 14
Stop-Loss ATR Multiplier: 1.5 to 2.0
Score Confirmation: On
Minimum Score: 71%
Fair Value Gaps:
Enabled
Threshold: 0.1% to 0.5%
Mitigation Levels: On
Unmitigated Levels: 3 to 5
POSSIBLE LONG SETUP
UT BUY appears.
Price is above VWAP.
EMA 9 is above EMA 21.
Sniper BUY appears or the bullish score is above 57%.
A red RSI oversold dot recently appeared.
Enter after candle confirmation or a pullback.
Use the ATR stop-loss level.
Take partial profit at TP1, TP2, and TP3.
POSSIBLE SHORT SETUP
UT SELL appears.
Price is below VWAP.
EMA 9 is below EMA 21.
Sniper SELL appears or the bearish score is above 57%.
A green RSI overbought dot recently appeared.
Enter after candle confirmation or a retest.
Use the ATR stop-loss level.
Take partial profit at TP1, TP2, and TP3.
FVG CONFIRMATION
Bullish Fair Value Gap:
Use as a possible support or pullback area during an uptrend.
Bearish Fair Value Gap:
Use as a possible resistance or rejection area during a downtrend.
Do not enter only because an FVG appears. Combine it with UT Bot direction, VWAP, EMA trend, RSI conditions, and price action.
ATR STOP-LOSS GUIDE
Fast scalp:
1.0 to 1.2 ATR
Normal intraday trade:
1.5 ATR
More volatile market:
2.0 ATR
A tighter ATR setting creates a closer stop-loss but may cause more stop-outs.
A larger ATR setting gives the trade more room but increases the amount at risk.
BEST CONFIRMATION COMBINATION
Long:
UT BUY + Above VWAP + Bullish EMA trend + Strong bull score
Short:
UT SELL + Below VWAP + Bearish EMA trend + Strong bear score
Avoid entering when UT Bot and Sniper signals disagree.
RISK MANAGEMENT
Never risk your entire account on one trade.
Consider risking only 1% to 2% of your account per trade.
Take partial profit instead of waiting for every target.
Move the stop-loss only according to your trading plan.
This indicator is a confirmation system, not a guaranteed buy-and-sell system.
Always test the settings on your market, symbol, and timeframe before using real money.
For educational purposes only. Not financial advice.
Wskaźnik
Stock SniperHOW TO USE
This indicator combines multiple tools into one TradingView system:
✅ UT Bot main buy and sell signals
✅ Optional Sniper Entry signals
✅ Optional Fair Value Gaps
✅ ATR-based stop-loss and profit targets
✅ Optional EMA ribbon, VWAP, dashboard, and candle colors
MAIN SIGNAL SYSTEM
The UT Bot is the main signal system.
🟢 UT BUY = possible bullish entry
🔴 UT SELL = possible bearish entry
The Sniper Entry module is optional and can be used as extra confirmation.
🟢 SNIPER BUY = EMA 9 crossing above EMA 21
🔴 SNIPER SELL = EMA 9 crossing below EMA 21
RSI DOTS
🔴 Red dot below the candle = RSI oversold
🟢 Green dot above the candle = RSI overbought
Important: The RSI dot colors are intentionally reversed from traditional colors.
A red oversold dot does not automatically mean buy.
A green overbought dot does not automatically mean sell.
Use the dots as a warning that price may be stretched.
FAST SCALP SETTINGS
Recommended for 1-minute, 3-minute, or 5-minute charts.
UT Bot Settings:
Key Value: 0.7 to 1.0
ATR Period: 5 to 7
Heikin Ashi Source: Optional
UT Bar Colors: On
ATR Trailing Stop: On
Sniper Settings:
Fast EMA: 9
Slow EMA: 21
ATR Length: 7
Stop-Loss ATR Multiplier: 1.0 to 1.2
Score Confirmation: Off for more signals
Minimum Score: 57%
Optional Visuals:
EMA Ribbon: On
VWAP: On
Entry, SL, and TP Levels: On
Dashboard: Off for a cleaner chart
Fair Value Gaps: Off or only use on the 5-minute chart
BALANCED INTRADAY SETTINGS
Recommended for 5-minute or 15-minute charts.
UT Bot Settings:
Key Value: 1.0
ATR Period: 10
Heikin Ashi Source: Off
UT Bar Colors: On
ATR Trailing Stop: On
Sniper Settings:
Fast EMA: 9
Slow EMA: 21
ATR Length: 14
Stop-Loss ATR Multiplier: 1.5
Score Confirmation: On
Minimum Score: 57% to 71%
Optional Visuals:
EMA Ribbon: On
VWAP: On
Dashboard: On
Fair Value Gaps: On
FVG Extend: 20 bars
CONSERVATIVE SETTINGS
Recommended for fewer but stronger signals.
UT Bot Settings:
Key Value: 1.5 to 2.0
ATR Period: 14
Heikin Ashi Source: On
Sniper Settings:
Fast EMA: 9
Slow EMA: 21
ATR Length: 14
Stop-Loss ATR Multiplier: 1.5 to 2.0
Score Confirmation: On
Minimum Score: 71%
Fair Value Gaps:
Enabled
Threshold: 0.1% to 0.5%
Mitigation Levels: On
Unmitigated Levels: 3 to 5
POSSIBLE LONG SETUP
UT BUY appears.
Price is above VWAP.
EMA 9 is above EMA 21.
Sniper BUY appears or the bullish score is above 57%.
A red RSI oversold dot recently appeared.
Enter after candle confirmation or a pullback.
Use the ATR stop-loss level.
Take partial profit at TP1, TP2, and TP3.
POSSIBLE SHORT SETUP
UT SELL appears.
Price is below VWAP.
EMA 9 is below EMA 21.
Sniper SELL appears or the bearish score is above 57%.
A green RSI overbought dot recently appeared.
Enter after candle confirmation or a retest.
Use the ATR stop-loss level.
Take partial profit at TP1, TP2, and TP3.
FVG CONFIRMATION
Bullish Fair Value Gap:
Use as a possible support or pullback area during an uptrend.
Bearish Fair Value Gap:
Use as a possible resistance or rejection area during a downtrend.
Do not enter only because an FVG appears. Combine it with UT Bot direction, VWAP, EMA trend, RSI conditions, and price action.
ATR STOP-LOSS GUIDE
Fast scalp:
1.0 to 1.2 ATR
Normal intraday trade:
1.5 ATR
More volatile market:
2.0 ATR
A tighter ATR setting creates a closer stop-loss but may cause more stop-outs.
A larger ATR setting gives the trade more room but increases the amount at risk.
BEST CONFIRMATION COMBINATION
Long:
UT BUY + Above VWAP + Bullish EMA trend + Strong bull score
Short:
UT SELL + Below VWAP + Bearish EMA trend + Strong bear score
Avoid entering when UT Bot and Sniper signals disagree.
RISK MANAGEMENT
Never risk your entire account on one trade.
Consider risking only 1% to 2% of your account per trade.
Take partial profit instead of waiting for every target.
Move the stop-loss only according to your trading plan.
This indicator is a confirmation system, not a guaranteed buy-and-sell system.
Always test the settings on your market, symbol, and timeframe before using real money.
For educational purposes only. Not financial advice.
Wskaźnik
Kloom VWAP Bands [Free]Anchored VWAP (session, week or month) with two standard-deviation bands and a live deviation readout.
How it works
- VWAP accumulates price times volume from the chosen anchor (session, week or month).
- Bands at 1 and 2 standard deviations are computed from the true volume-weighted variance, not a moving-average approximation.
- The table shows the current deviation in sigma: beyond +2 or below -2 the price is statistically stretched from the volume-weighted average.
How to use it
Mean reversion: in ranging markets, fade moves beyond the 2-sigma band back toward VWAP. Trend confirmation: price holding above VWAP and riding the upper band signals a strong session.
Both multipliers and the source are configurable.
This is a study for education and research. It is not financial advice.
Wskaźnik
Kloom Session Levels [Free]New York and London session ranges with previous-day high and low, all timezone-correct.
How it works
- Sessions are computed in America/New_York time regardless of your chart or exchange timezone, so the ranges are always right.
- Live session high/low lines are drawn while each session is open, plus the session open level.
- PDH and PDL come from the daily timeframe and are labeled at the right edge of the chart.
How to use it
Session opens concentrate volume and breakouts. PDH and PDL are the most-watched intraday levels. A classic combination: London range break during the New York open.
Both session windows are fully configurable.
This is a study for education and research. It is not financial advice.
Wskaźnik
TSI in Dynamic Zones with Divergence v2.2HOW TO READ IT
A momentum companion oscillator built around the True Strength Index (TSI), with adaptive overbought/oversold zones, automatic divergence detection, and a volatility-context dashboard. Designed to ride underneath a price-chart framework (MA stack / squeeze / trigger systems) as the momentum second opinion: the price chart tells you where, this tells you how much force is behind it. Adapted from the open-source GPL-3.0 "TSI in Dynamic Zones with Divergence" with Pine v6 fixes and display work; published under the same license.
THE 30-SECOND VERSION
Cyan line = TSI (momentum). Orange line = its signal. Cyan above orange = bulls in control; below = bears. The shaded orange band on top and aqua band on the bottom are NOT fixed levels — they're dynamic zones that adapt to the last 70 bars, so "overbought" on a quiet day sits lower than on a wild one. Momentum reaching into a zone is stretched; turning back out of one is the actionable part. Green/red labels on the oscillator are divergences: price and momentum disagreeing, which is an early-warning sign, not an entry by itself.
WHAT EACH ELEMENT MEANS
TSI + signal cross — The basic momentum read. Crosses above zero carry more weight than crosses below it for longs, and vice versa.
Dynamic zones (orange top / aqua bottom) — Percentile-based adaptive OB/OS. Entering a zone = stretched. Exiting back through it = momentum actually turning.
Divergence labels — Green (bullish): price made a lower low but TSI made a higher low — selling force is fading. Red (bearish): price higher high, TSI lower high — buying force is fading. Hidden divergences (aqua/orange, off by default) are continuation signals rather than reversal signals.
White triangles — TSI pivot highs/lows at stretched readings; minor structure inside the oscillator.
Orange / aqua cross markers (top and bottom rows) — A sequence of signal-line cross-bounces that's deteriorating (orange, possible top) or improving (aqua, possible bottom). "Maybe" signals — context, not triggers.
Column colors behind the TSI — Kumo-based implied volatility heat: white/silver/aqua = quiet, yellow/orange = elevated, red/dark red = extreme. Divergences and zone touches mean more when volatility is waking up.
DASHBOARD
TSI — Current value and regime (BULL/BEAR, above/below zero).
Zones — Today's adaptive buy/sell thresholds, so you know what counts as stretched right now.
BB % — Where price sits inside its Bollinger Bands (0 = lower band, 1 = upper).
BBW % — Bollinger Band Width percentile. Under 7 = SQUEEZE (compression — pair this with your price chart's squeeze state). Over 70 = EXPANDED.
MFI — Money Flow Index: volume-weighted momentum, OB above 80 / OS below 20.
Kumo IV — The volatility regime in words, MINIMAL through EXTREME.
SMALL SCREENS — TINY AND COMPACT MODES
Settings → Inputs → Dashboard:
• Dashboard text size — Tiny / Small / Normal. Tiny roughly halves the footprint; recommended on phones and small laptops.
• Dashboard mode — Full shows all 6 rows. Compact merges everything into 3 short rows: TSI value + regime, the two zone thresholds, and a one-line volatility readout (BBWP · IV · MFI). Phone recipe: Compact + Tiny + a corner position.
• Dashboard position — six anchor choices to keep it out of the oscillator's way.
KEY SETTINGS
TSI lengths (5/12/10) — Faster than the textbook 25/13 on purpose; built for intraday timeframes.
Cross signal threshold (±) — Gates the orange/aqua cross-bounce markers to crosses beyond ± this value. Default 0 (any cross past zero); raise toward 30 to only flag crosses at stretched readings.
Divergence pivot lookbacks — Lower left-lookback = more signals, more noise. 5 is aggressive; 8–10 is conservative.
Filter crossovers by BBWP — On by default: zero-line crossover alerts are suppressed during squeezes, when chop makes them unreliable.
Hidden divergences — Off by default; turn on if you trade continuation setups.
HONEST LIMITATIONS
Divergence labels confirm one bar after the pivot — the label appears with a delay by design, and acting on an unconfirmed wiggle is how divergence trading goes wrong. Divergences fail routinely in strong trends; momentum can stay "wrong" far longer than a position can. The dynamic zones need their full lookback (70 bars) of history to mean anything — ignore them in the first bars of a newly listed symbol or a fresh session on low-history tickers. This oscillator describes momentum; it knows nothing about structure, levels, or news. Read it alongside a price framework, not instead of one.
This is a study tool, not trade advice, and not an executor. Nothing here is a recommendation to buy or sell anything. Test it, judge the signals against what actually happened, and size your own risk.
Wskaźnik
Kloom ATR Position Sizer [Free]Stop guessing position size. Enter your equity and risk percent, and read the exact quantity for an ATR-based stop.
How it works
- Stop distance = ATR(14) multiplied by a configurable factor.
- Quantity = (equity x risk%) / stop distance - the classic fixed-fractional formula used by systematic traders.
- The table shows risk in money, ATR, stop distance, quantity, position value and implied leverage (highlighted red above 3x).
- Stop levels are drawn from the current price for both long and short.
How to use it
Set your equity once. Before every entry, read the quantity from the table and place your stop at the drawn level. Works for crypto, forex, futures and stocks - any symbol with a price.
This is a study for education and research. It is not financial advice.
Wskaźnik
Kloom Regime Detector [Free]Answers the question every strategy needs answered first: what market are we in?
How it works
- ADX (computed from raw directional movement, no repainting) measures trend strength; above the threshold the market is trending, with direction taken from the 50/200 EMA relationship.
- ATR% compared against its own average detects volatility explosions (HIGH VOL state: trade smaller or stand aside).
- Four states: TREND BULL, TREND BEAR, RANGE, HIGH VOL - background color plus a diamond marker on every state change.
How to use it
Run breakout systems only in TREND states; mean-reversion only in RANGE; cut position size in HIGH VOL. The table shows the current state, ADX and ATR% live.
All thresholds and lengths are configurable.
This is a study for education and research. It is not financial advice.
Wskaźnik
Skippy the Indicator v1.8.4Multi-timeframe MA-structure framework for short-timeframe momentum trading. Codifies a full squeeze-to-exit sequence — squeeze arming, 50ma curl, MA-stack trigger, MA5 ride, staged exit — into plain-language labels, a state machine, and a dashboard.
THE SEQUENCE
The core logic walks one setup from start to finish:
WATCH → READY → BUY → HOLD → TRIM or SELL
WATCH — Squeeze armed. Bollinger Bands are inside the Keltner Channels; energy is compressing.
READY ▲/▼ — The 50ma has begun to curl in the trade direction. Early heads-up.
BUY ▲/▼ — Gamma trigger. MA5, MA10, and MA20 have all closed beyond the 50ma, with the required number of confirmation closes (user-set, default 1). A ★ on the BUY marks a full-sequence setup: squeeze → curl → cross.
HOLD ▲/▼ — Price retested the MA5 and held (the glue). Trend intact.
TRIM ▲/▼ — MA5 glue failed. The leg is done but the thesis is alive. Lighten and watch for re-entry. This is NOT an exit signal.
SELL ▲/▼ — Price rejected at the 50ma with confirmed closes. Thesis dead.
TRIM vs SELL is the one distinction not to blur: orange means the leg ended, red means the trade ended.
A Display toggle switches all labels to technical names (ARMED / CURL / GLUE ✓✗ / ✕50) if you prefer.
REVERSAL SIGNALS
PR — Potential Reversal at a Bollinger Band extreme, RSI-confirmed. As of v0.8.4, PR fires intrabar the moment the high/low touches the band — non-repainting, since a bar's high/low can only extend, never retract. A toggle restores close-confirmed firing. PR is a mean-reversion signal and misfires in strong trends by design — that is what HOLD and the Direction row are for.
RIDE logic converts a failed fade into a continuation read: PR fires, then MA5 holds on the retest — the fade failed and the prior trend is resuming.
DASHBOARD
Seq State in plain language (WAITING / WATCHING / GETTING READY / IN TRADE / LEG DONE — WATCH RE-ENTRY), Direction from full MA-stack alignment, RSI veto row, Fast TFs (5/15/30m) and Slow TFs (1h/4h/D/W) bullish counts, cascading three-level target sequence, structure proximity (previous highs/lows, necklines — wick-measured as of v0.8.4), session window, and volume (informational only — it never gates signals).
Display options: Full (19 rows) or Compact (9 rows), Tiny/Small/Normal text size, and position. On phones use Compact + Tiny + bottom right.
ALERTS
Every label has a matching alert, and push notifications lead with the action word ("BUY ▲ — MA5/10/20 closed above 50ma"). PR and structure alerts use touch semantics — set alert frequency to "Once per bar."
READING IT
Trigger and exit logic is close-confirmed on the chart timeframe: "through" a level means a confirmed close, not a wick. The state machine reads one chart — always check higher timeframes before acting. Fast/slow TF agreement is the conviction read; disagreement is information (fast bear + slow bull = pullback in an uptrend, fast bull + slow bear = bounce in a downtrend).
This is a study and visual-verification tool, not trade advice and not an executor. The label words are signal names, not instructions — nothing here is a recommendation to buy or sell anything. Judge the signals against what actually happens and size your own risk.
Wskaźnik
Kloom Turtle System [Free]Classic Turtle-style Donchian breakout system with a clean visual state engine.
How it works
- Entry channel: highest high / lowest low of the last 20 bars (Donchian). A close beyond the previous bar's channel triggers a long or short state.
- Exit channel: 10-bar Donchian on the opposite side (classic Turtle S1 exit).
- Optional 200 EMA trend filter: longs only above, shorts only below.
- A state table shows the current system state (LONG / SHORT / FLAT) and regime at a glance.
How to use it
Works on any symbol and timeframe. Best on trending markets (crypto majors, gold, indices) on the 1h to 4h. All lengths are configurable.
What's different
Signals fire on confirmed breaks of the previous bar's channel, so there is no repainting, and exits are drawn continuously so you always know where the system would flip.
This is a study for education and research. It is not financial advice.
Wskaźnik
CQ_(9)_Zig Zag Auto Fibonacci Retracement================================================================================
CQ_(9)_
USER MANUAL
================================================================================
Author handle : CQuevedo345
Platform : TradingView
Language : Pine Script v6
Type : Overlay indicator
Built from : Section 1 = CQ_(5)_Zig Zag Trend Metrics (ported verbatim)
Section 2 = CQ_(8)_Auto Fibonacci Retracement (adapted to be
fed by the zigzag's last confirmed leg)
--------------------------------------------------------------------------------
1. WHAT THIS INDICATOR DOES
--------------------------------------------------------------------------------
This script merges two tools into one overlay:
A) A ZIG ZAG SWING ENGINE that detects confirmed swing highs and lows over
a user-defined lookback period, connects them with lines, labels each
swing with its price/percent change and bar-time distance from the prior
opposite swing, and (optionally) shows a running statistics table of the
average up-leg and down-leg size/duration.
B) An AUTO FIBONACCI RETRACEMENT + GAUGE that is automatically anchored to
whatever the zigzag currently considers its LAST CONFIRMED LEG. As the
zigzag confirms new swings, the Fibonacci grid re-anchors itself with no
manual drawing required.
Because the retracement math is direction-agnostic (0% is always the newest
pivot, 100% is always the older pivot), the readout flips meaning depending on
the leg type:
- Last leg is BEARISH (High -> Low) => retracement is measured UP from the
low, i.e. it reads as a potential BULLISH bounce.
- Last leg is BULLISH (Low -> High) => retracement is measured DOWN from
the high, i.e. it reads as a potential BEARISH pullback.
--------------------------------------------------------------------------------
2. HOW THE ZIG ZAG ENGINE WORKS (SECTION 1)
--------------------------------------------------------------------------------
- Every bar, the script checks whether the current bar's high is the highest
high of the last "Period" bars (a confirmed pivot high) or the current low
is the lowest low of the last "Period" bars (a confirmed pivot low).
- "direction" flips to +1 on a new pivot high context and -1 on a new pivot
low context. A swing point is only "added" the first time direction flips;
while direction stays the same, the existing extreme point is simply
UPDATED (extended) if price makes a more extreme high/low.
- Each swing point gets a label showing:
* Pattern tag: HH / LH (higher high / lower high) or LL / HL
(lower low / higher low)
* The price or percent change versus the most recent OPPOSITE swing
(format controlled by the "Δ Format" input)
* Elapsed bars ("⏱") since that opposite swing
* Optionally, a second "cycle" line showing elapsed bars since the
previous SAME-type swing (Show "Display Cycle")
- Connecting lines:
* Thin "range lines" link consecutive same-type swings (high-to-high,
low-to-low) if "Range Lines" is enabled.
* Thick colored lines link low-to-high (bullish leg, up color) and
high-to-low (bearish leg, down color) — these are the zigzag's main
visible backbone and are what Section 2 anchors to.
* A fill (linefill) shades the area between the most recent high-to-high
and low-to-low lines.
- A statistics table (optional) shows the GEOMETRIC AVERAGE of the last N
("Averaging") up-leg and down-leg price changes and their average bar
durations. Geometric averaging is used instead of arithmetic to better
represent compounding percentage moves.
--------------------------------------------------------------------------------
3. HOW THE FIBONACCI ENGINE WORKS (SECTION 2)
--------------------------------------------------------------------------------
- A "leg bridge" watches the zigzag's internal arrays every bar. Whenever the
zigzag's lastSwingType is "high" and a bullish line exists, that bullish
line becomes the active Fibonacci anchor (0%=high just made, 100%=the low
it came from). Whenever lastSwingType is "low" and a bearish line exists,
that bearish line becomes the anchor instead (0%=low just made, 100%=the
high it came from).
- The active leg line is automatically restyled DASHED with hollow circle (◯)
markers at both ends so you can see at a glance which leg is currently
driving the Fibonacci grid. When a newer leg takes over, the old leg is
reverted back to its normal solid zigzag styling.
- Standard retracement levels drawn: 0%, 25%, 40%, 50%, 60%, 75%, 90%, 100%
(each individually toggleable).
- Extended/projection levels are drawn AUTOMATICALLY, only when price has
actually traded through the prior threshold level: -25%, -50%, -100%,
-150%, -200%, 125%, 150%, 200%. These auto-lines fade in only when needed,
keeping the chart clean during normal retracements.
- Each level shows:
* A short horizontal "identifier" line from the pivot's opposite end out
to the current bar (dotted for internal levels, solid+thick for 0%/100%)
* A small tick/handle at the right-hand gauge column
* A label with the level percentage and (optionally) the exact price
- GAUGE (drawn at the 100% level position, right side of chart by default):
* Outer dotted box + white/colored end lines = the highest/lowest price
reached since the anchor leg was confirmed (the "extreme" reading,
also shown as a small ▲/▼ % label).
* Inner solid box + thick colored line = current CLOSE plotted against
the 0% pivot price, i.e. a compact visual "how far has price already
retraced/extended" bar.
- PROFIT LABEL (drawn at the 0% level): shows the raw $ change of the current
close versus the 0% pivot price, with a tooltip giving the % change too.
- An optional raw CLOSE PRICE line/area/histogram/step/cross/column/circle
plot can be overlaid for reference (off by default).
--------------------------------------------------------------------------------
4. INPUT REFERENCE
--------------------------------------------------------------------------------
♦ lines (zigzag)
- Period : Lookback bars used to confirm a pivot high/low
- Color ↑ / ↓ : Colors of the bullish/bearish zigzag legs
- Width : Line width of the zigzag legs
- Range Lines / color : Toggle + color for the thin high-to-high /
low-to-low connector lines
- Highlight Last Confirmed Leg : Toggle the dashed+circle styling on the
active leg
- Marker Size : Size of the hollow circle end markers
♦ labels (zigzag)
- Δ Format : "Percent" or "Absolute" for the swing-label
price change readout
- Text Size : Size of zigzag swing labels
- Display Cycle : Adds a second same-type elapsed-time line to
each swing label
♦ statistics table (zigzag)
- Show Stats table : Toggle the table on/off
- Location / Size : Table position and text size
- Averaging : Number of past legs used in the geometric
average calculation
🪙 Fibonacci Retracement — ⚙ Master Control
- Enable Fibonacci Gauge : Master on/off switch for Section 2
- 25% / 40% / 50% / 60% / 75% / 90% : Toggle each standard retracement level
Close Price Plot
- Show Line Graph, Color, Width, Style : Optional raw price plot overlay
Color Settings
- BEARISH / BULLISH theme colors (note: named for the CURRENT tendency the
retracement implies, not the leg direction itself — see Section 1 note
above)
- Use Trend Colors for Labels (+ independent label colors if disabled)
- Label Side (vs Gauge) : Left or Right label placement
- Gauge ⁞▌ toggle + Bullish/Bearish highlight colors
- Gauge X-Offset : Horizontal offset of the gauge column from the
anchor bar
- Level Tick Length (Right) : Length of the small tick marks at the gauge
- Show Price on Labels : Adds the exact price under each % label
- Label Size
- Gauge at Line End (vs Current Bar) : Anchors the gauge column to the end
of the active leg line instead of following the
live/current bar
♦ Last Confirmed Leg
- Dash Last Leg : Restyle the active leg as dashed
- Mark Start/End (Hollow Circles) : Add ◯ markers at both ends
- Circle Size
--------------------------------------------------------------------------------
5. READING THE CHART — QUICK GUIDE
--------------------------------------------------------------------------------
1. Find the DASHED leg with ◯ markers — that is the leg currently driving the
Fibonacci grid.
2. Check which color theme is active at the gauge (BULLISH vs BEARISH theme
color) to know whether the retracement is reading as an up-bounce or a
down-pullback.
3. Use the OUTER gauge box to see how far price has already run beyond the
0%/100% pivots (the extreme reached since the leg was confirmed).
4. Use the INNER gauge box/line to see where the current close sits relative
to the 0% pivot right now.
5. The PROFIT label at 0% gives you a quick $ (and, via tooltip, %) read of
how far price has moved from the most recent extreme pivot.
6. Auto-extension levels (125%, 150%, 200%, -50%, -100%, etc.) only appear
once price has actually traded past the prior level — their absence means
price hasn't reached that extension yet.
--------------------------------------------------------------------------------
6. TECHNICAL NOTES / ARCHITECTURE
--------------------------------------------------------------------------------
- indicator() flags: max_labels_count=500, max_lines_count=500,
max_boxes_count=500, explicit_plot_zorder=true, max_bars_back=4000.
- Section 1 is ported VERBATIM from CQ_(5)_Zig Zag Trend Metrics — no logic
was altered, only reused as the pivot/leg source of truth.
- Section 2 does not run its own pivot detection; it reads directly from the
Section 1 arrays (swingHighValues/BarIndexes, swingLowValues/BarIndexes,
bullishLines, bearishLines, lastSwingType) each bar via the "leg bridge"
block, so the two sections always stay in sync.
- Persistent var objects (lines/boxes/labels) are reused and repositioned in
place each bar rather than deleted/recreated, following the standard CQ
collect-then-update pattern for efficient rendering.
- request.security() is used once to pull a small multi-value tuple
(volume, OHLC variants, ATR14, RSI-of-PVT, etc.) — several of these fields
are legacy/reserved from the source script and only k_atr14 and k_high/
k_low are actively used by the current Fibonacci logic.
- Colors for the "BULLISH"/"BEARISH" theme inputs are intentionally reversed
relative to leg direction — they represent the TENDENCY implied by the
retracement, not the raw zigzag leg color. This mirrors the source script
(CQ_(8)) naming convention; see Section 3 note if this feels
counter-intuitive at first.
--------------------------------------------------------------------------------
7. VERSION / COMPATIBILITY
--------------------------------------------------------------------------------
- Written for Pine Script v6.
- overlay=true — must be applied directly to the price chart, not a
separate pane.
- No alerts or strategy logic included; this is a pure visual/analysis tool.
================================================================================
END OF MANUAL
================================================================================
Wskaźnik
Wskaźnik
Prev Day 50 FibPrevious Day 50 Fib (Mid-Trend Level)
Plots yesterday's (high + low) / 2 on the chart.
Above the line = leans bullish. Below = warning.
Wskaźnik
50 Fib Screener A// 50 Fib Screener A (AAOI - META)
// Watches 34 tickers. Fires ONE alert naming any ticker that
// breaks below or reclaims its previous-day 50 Fib.
// Setup: add to any chart -> create ONE alert on this
Wskaźnik
Gabriel Ideal Impulse Wave Screener w/ TargetDetects waves 1-2-3-4 at wave-4 completion, labels each with its rule check (✓): 2 held above wave-1 start, 4 held above wave-1 end, 3 longer than wave 1
Draws both dashed rule lines exactly as on the card (wave-1 end and wave-1 start levels)
WAVE-5 TARGET ZONE box projected from 4 (default 61.8–100% of wave 1, capped so wave 5 stays shorter than wave 3 — keeping 3 the longest, per the card)
BUY ▲ / SELL ▼ notation at 4; full bearish mirror; alerts with wave-4 price and target zone
Tunables: pivot length, min wave-1 size %, max width, target range/length, colors
Wskaźnik
Gabriel 5-0 & Nen Star Reversal Screener w/Target5-0: AB = 1.13–1.618 of OA, BC = 1.618–2.24 of AB, D ≈ 0.5 retrace of BC
Nen Star: B = 0.382–0.618 of OA, C = 1.13–1.454 of AB, D = 1.272–2.0 of BC
O-A-B-C-D labels (yellow), green/red legs, gray dashed ratio guide lines matching the card
D gets BUY ▲ / SELL ▼ with price; TARGET ZONE box after D (default 38.2–61.8% of the CD leg, tunable range & length) with price notation
Alerts fire with D price and target zone; tunables: pivot length, ratio tolerance, max width
Wskaźnik
Gabriel Gartley O-A-B-C-D Screener w/ TargetO, A, B, C labeled (yellow) with actual retrace % on B and C; card ratios enforced: B ≈ 0.618 of O-A, C = 0.382–0.886 of A-B, D ≈ 0.786 of O-A (tunable tolerance)
D (Stop-Loss) in red with price + dashed stop line
"Buy with Support ▲" after bullish D; mirror "Sell after Resistance ▼" after bearish D
TARGET for the last leg past D (default 61.8% of O-A, tunable) — dashed orange level + dotted projection ray
Green/red legs per direction, gray dashed O-D and A-C guide lines, alerts with D, stop, and target prices
Wskaźnik
Sniper Open - Complete SignalSniper Open — NY Open FVG + Liquidity + Momentum
This indicator detects a specific 3-part confluence at the New York market open (9:30-9:45 ET):
Fair Value Gap (FVG) — a 3-candle imbalance in price
Liquidity Zone alignment — the gap must sit near a validated equal-high/equal-low level (2+ touches within 24 hours)
Momentum confirmation — the confirming candle must close in the signal's direction
Order block alignment — a recent order block in the same direction must exist
All four conditions must align, during the 9:30-9:45 ET window specifically, for a confirmed signal to fire.
Backtested results (3 years of NQ data, train/test validated):
~66-71% win rate on filled trades
~13-16 point average expectancy per filled trade
Signals fire roughly once every 2 trading days
How to use it:
The small faded circles are "watching" markers — an unconfirmed setup possibly forming. Informational only, not a trade signal.
The solid triangle is the confirmed signal. When it appears, place a limit order at the entry price shown (not a market order).
If your limit order isn't filled within 15 minutes, cancel it. This happens on roughly 44% of signals — it's expected, not a malfunction. The strategy's edge comes from letting price return to the level, not chasing it.
Stop and target levels are drawn automatically alongside each signal.
Important disclaimers:
This is backtested historical data, not a live trading track record. Past performance does not guarantee future results.
This is not financial advice. Trade at your own risk and do your own due diligence.
Built and tested specifically for NQ futures at the NY open — performance on other instruments or timeframes is not validated.
No mechanical filter can eliminate all uncertainty — momentum can reverse, targets aren't always reached, and drawdowns happen even in genuinely validated strategies.
Wskaźnik
Gabriel Wolfe Wave Screener w/ TargetZigzag pivots label 1-2-3-4-5 (yellow); point 5 gets "5 — Target Entry (BUY ▲ / SELL ▼)" with price
1-3 line (red, entry line) and 1-4 line (green, target line) drawn as rays, matching the card
Dashed orange projection from 5 to TARGET on the 1-4 line, with price notation
Bullish: 3 below 1, 4 below 2, 5 at/under the 1-3 line (tunable ATR tolerance + max overshoot); bearish is the exact mirror
Alerts fire with entry and target prices; tunables: pivot length, tolerance, max width, projection distance
Wskaźnik
